The instruction set has 3 insns that perform the same operation,
only varying in which operand must overlap the destination. We
can represent the operation without overlap and choose based on
the operands seen.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform a per-element conditional move. This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LD1R instruction does all the work. Note that the only
useful addressing mode is a base register with no offset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will let backends implement the double-word shift operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For now, defined universally as true, since we previously required
backends to implement swapped memory operations. Future patches
may now remove that support where it is onerous.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This does require an extra two checks within the slow paths
to replace the assert that we're moving.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will move the assert for success from within (subroutines of)
patch_reloc into the callers. It will also let new code do something
different when a relocation is out of range.
For the moment, all backends are trivially converted to return true.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are one use apiece for these. There is no longer a need for
preserving branch offset operands, as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In AdvSIMD we can only do 32x32 integer multiples although SVE is
capable of larger 64 bit multiples. As a result we can end up
generating invalid opcodes. Fix this by only reprting we can emit
mul vector ops if the size is small enough.
Fixes a crash on:
sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin
When running on AArch64 hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org>
[rth: Removed the tcg_debug_assert -- there are plenty of other
cases that we do not diagnose within the insn encoding helpers.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Also, assert that we don't overflow any of two different offsets into
the TB. Both unwind and goto_tb both record a uint16_t for later use.
This fixes an arm-softmmu test case utilizing NEON in which there is
a TB generated that runs to 7800 opcodes, and compiles to 96k on an
x86_64 host. This overflows the 16-bit offset in which we record the
goto_tb reset offset. Because of that overflow, we install a jump
destination that goes to neverland. Boom.
With this reduced op count, the same TB compiles to about 48k for
aarch64, ppc64le, and x86_64 hosts, and neither assertion fires.
Cc: qemu-stable@nongnu.org
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's not even clear what the interface REG and VAL32 were supposed to mean.
All uses had REG = 0 and VAL32 was the bitset assigned to the destination.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Dispense with TCGBackendData, as it has never been used for more than
holding a single pointer. Use a define in the cpu/tcg-target.h to
signal requirement for TCGLabelQemuLdst, so that we can drop the no-op
tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump
boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional
function tb_target_set_jmp_target.
While we're touching all backends, add a parameter for tb->tc_ptr;
we're going to need it shortly for some backends.
Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c.
This opens the possibility for TCG_TARGET_HAS_direct_jump to be
a runtime decision -- based on host cpu capabilities, the size of
code_gen_buffer, or a future debugging switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch enables the indirect jump path using an LDR (literal)
instruction. It will be interesting to test and see which performs
better among the two paths.
CC: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630143614.31059-3-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We use ADRP+ADD to compute the target address for goto_tb. This patch
introduces the NOP instruction which is used to align the above
instruction pair so that we can use one atomic instruction to patch
the destination offsets.
CC: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630143614.31059-2-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can use a branch to register instruction for exit_tb for offsets
greater than 128MB.
CC: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630143614.31059-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The new placement of the TB means that we can use one insn
to load the return value for exit_tb returning the TB pointer.
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of exporting goto_ptr directly to TCG frontends, export
tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer
returned by the lookup_tb_ptr() helper. This is the only use case
we have for goto_ptr and lookup_tb_ptr, so having this function is
very convenient. Furthermore, it trivially allows us to avoid calling
the lookup helper if goto_ptr is not implemented by the backend.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org>
[rth: Squashed 4 related commits.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
To fix the following warnings:
In file included from /users/pranith/qemu/tcg/tcg.c:255:
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:879:24: warning: implicit conversion from enumeration type 'TCGMemOp' (aka 'enum TCGMemOp') to different enumeration type 'TCGType' (aka 'enum TCGType')
[-Wenum-conversion]
tcg_out_cmp(s, ext, a, b, b_const);
~~~~~~~~~~~ ^~~
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:893:36: warning: implicit conversion from enumeration type 'TCGMemOp' (aka 'enum TCGMemOp') to different enumeration type 'TCGType' (aka 'enum TCGType')
[-Wenum-conversion]
tcg_out_insn(s, 3201, CBZ, ext, a, offset);
~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:389:65: note: expanded from macro 'tcg_out_insn'
glue(tcg_out_insn_,FMT)(S, glue(glue(glue(I,FMT),_),OP), ## __VA_ARGS__)
^
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:895:37: warning: implicit conversion from enumeration type 'TCGMemOp' (aka 'enum TCGMemOp') to different enumeration type 'TCGType' (aka 'enum TCGType')
[-Wenum-conversion]
tcg_out_insn(s, 3201, CBNZ, ext, a, offset);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:389:65: note: expanded from macro 'tcg_out_insn'
glue(tcg_out_insn_,FMT)(S, glue(glue(glue(I,FMT),_),OP), ## __VA_ARGS__)
^
/users/pranith/qemu/tcg/aarch64/tcg-target.inc.c:1610:27: warning: implicit conversion from enumeration type 'TCGType' (aka 'enum TCGType') to different enumeration type 'TCGMemOp' (aka 'enum TCGMemOp')
[-Wenum-conversion]
tcg_out_brcond(s, ext, a2, a0, a1, const_args[1], arg_label(args[3]));
~~~~~~~~~~~~~~ ^~~
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170217154311.13920-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There were some patterns, like 0x0000_ffff_ffff_00ff, for which we
would select to begin a multi-insn sequence with MOVN, but would
fail to set the 0x0000 lane back from 0xffff.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-3-rth@twiddle.net>
When al == xzr, we cannot use addi/subi because that encodes xsp.
Force a zero into the temp register for that (rare) case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-2-rth@twiddle.net>
The number of actual invocations of ctpop itself does not warrent
an opcode, but it is very helpful for POWER7 to use in generating
an expansion for ctz.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will let us choose how to interpret a given constraint
depending on whether the opcode is 32- or 64-bit. Which will
let us share more constraint combinations between opcodes.
At the same time, change the interface to return the advanced
pointer instead of passing it in/out by reference.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will allow the target to tailor the constraints to the
auto-detected ISA extensions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of
fixed position bitfields, much like we already have for deposit.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.
In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.
Signed-off-by: Richard Henderson <rth@twiddle.net>
These use guard symbols like TCG_TARGET_$target.
scripts/clean-header-guards.pl doesn't like them because they don't
match their file name (they should, to make guard collisions less
likely).
Clean them up: use guard symbol $target_TCG_TARGET_H for
tcg/$target/tcg-target.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some architectures (e.g. ARMv8) need the address which is aligned
to a size more than the size of the memory access.
To support such check it's enough the current costless alignment
check implementation in QEMU, but we need to support
an alignment size specifying.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-Id: <1466705806-679898-1-git-send-email-afarallax@yandex.ru>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Assert in tcg_canonicalize_memop. Leave get_alignment_bits
available for, though unused by, user-mode. Retain logging difference
based on ALIGNED_ONLY.]
While we can store constants via constrants on INDEX_op_st_i32 et al,
we weren't able to spill constants to backing store.
Add a new backend interface, tcg_out_sti, which may store the constant
(and is allowed to fail). Rearrange the temp_* helpers so that we only
attempt to directly store a constant when the temp is becoming dead/free.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.
Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
tb_next_offset => jmp_reset_offset
tb_jmp_offset => jmp_insn_offset
tb_next => jmp_target_addr
jmp_next => jmp_list_next
jmp_first => jmp_list_first
Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in AArch64 is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-9-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TCG code is quite performance sensitive, but at the same time can
also be quite tricky. That is why asserts that can be enabled with the
--enable-debug-tcg configure option.
This used to work the following way:
| #include "config.h"
|
| ...
|
| #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG)
| /* define it to suppress various consistency checks (faster) */
| #define NDEBUG
| #endif
|
| ...
|
| #include <assert.h>
Since commit 757e725b (tcg: Clean up includes) "config.h" as been
replaced by "qemu/osdep.h" which itself includes <assert.h>. As a
consequence the assertions are always enabled, even when using
--disable-debug-tcg, causing a performance regression, especially on
targets with many registers. For instance on qemu-system-ppc the
speed difference is about 15%.
tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already
uses in some places. This patch replaces all the calls to assert into
calss to tcg_debug_assert.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 757e725b58 added a number of #include "qemu/osdep.h"
files to the tcg-target.c files (as they were named at the time).
These are unnecessary because these files are not standalone C
files, and the tcg/tcg.c file which includes them will have
already included osdep.h on their behalf. Remove the unneeded
include directives.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rename the per-architecture tcg-target.c files to tcg-target.inc.c.
This makes it clearer that they are not intended to be standalone
C files, but are instead #included into another source file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-16-git-send-email-peter.maydell@linaro.org
In ffc6372851, we swapped the guest
base to the address base register from the address index register.
Except that 31 in the base slot is SP not XZR, so we need to be
more intelligent about which reg gets placed in which slot.
Cc: qemu-stable@nongnu.org (v2.4.0)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than allow arbitrary shift+trunc, only concern ourselves
with low and high parts. This is all that was being used anyway.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a
32-bit value is always converted to a 64-bit value and not propagated
through the register allocator or the optimizer.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32,
and the name in the README doesn't match the name offered to the
frontends.
Always use the long name to make it clear it is a size changing op.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Similar to the same fix for user-mode, except this instance
occurs on the softmmu path. Again, the tlb addend must be
the base register, while the guest address is the index.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Thanks to the previous patch, it is now easy for tcg_out_qemu_ld and
tcg_out_qemu_st to use a 32-bit zero extended offset. However, the
guest base register x28 must be the base and addr_reg must be the
index.
Reported-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1436974021-28978-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The new argument lets you pick uxtw or uxtx mode for the offset
register. For now, all callers pass TCG_TYPE_I64 so that uxtx
is generated. The bits for uxtx are removed from I3312_TO_I3310.
Reported-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1436974021-28978-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The addition of MO_AMASK means that places that used inverted masks
need to be changed to use positive masks, and places that failed to
mask the intended bits need updating.
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will be used to size the TLB when more than 8 MMU modes are
used by the target. Limitations come from the limited size of
the immediate fields (which sometimes, as in the case of Aarch64,
extend to instructions that shift the immediate).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the tcg opcode level, not at the tcg-op.h generator level.
This requires minor changes through all of the tcg backends,
but none of the cpu translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is less about improved type checking than enabling a
subsequent change to the representation of labels.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The "old" qemu_ld opcode did not specify the size of the result,
and so we had to assume full register width. With the new opcodes,
we can narrow the result.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since all backends have been converted, remove the compatibility code.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The INDEX_op_call case has just been obsoleted; the mov and movi
cases have not been reachable for years. Attempt to document this
both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT.
Because of the TCG_OPF_NOT_PRESENT change, this must be done for
all targets in a single commit.
Signed-off-by: Richard Henderson <rth@twiddle.net>
And use tcg pointer differencing functions as appropriate.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most 64-bit targets need to be able to ignore the high bits
of a TCG_TYPE_I32 value.
Suggested-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Static code analyzers complain about signed bitfields with only a single
bit. is_ld is used as a boolean value, so make it bool.
ppc64 already used bool for the 2nd argument is_ld of the local function
add_qemu_ldst_label. Modify all other TCG targets to do follow this
example.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The assembler seems to prefer them, perhaps we should too.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace aarch64_ldst_op_data with AArch64LdstType, as it wasn't encoded
for the proper shift for the field and was confusing.
Merge aarch64_ldst_op_data, AArch64LdstType, and a few stray opcode bits
into a single I3312_* argument, eliminating some magic numbers from the
helper functions.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cleaning up the implementation of REV and REV16 at the same time.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Making the bswap conditional on the memop instead of a compile-time test.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson