This makes the driver thread-safe. The CoMutex is dropped temporarily
while accessing the data clusters or the backing file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-10-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be used in the next patch, which will call bdrv_qed_do_open
with a CoMutex taken. bdrv_qed_init_state provides a nice place to
initialize it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-9-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will let the callback take a CoMutex in the next patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This part is never called for in-place writes, move it away to avoid
the "backwards" coding style typical of callback-based code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-7-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The VirtualBox driver is using a mutex to order all allocating writes,
but it is not protecting accesses to the bitmap because they implicitly
happen under the AioContext mutex. Change this to use a CoRwlock
explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-4-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
These functions are more efficient in the presence of contention.
qemu_co_rwlock_downgrade also guarantees not to block, which may
be useful in some algorithms too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-3-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
There's no requirement for RSDP to be installed last
by the firmware, so in rare cases vmgen id test hits
a race: RSDP is there but VM GEN ID isn't.
To fix, switch to common boot sector infrastructure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Message-id: 1500046217-24597-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=kk0K
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-sockets-2017-07-11-3' into staging
Merge sockets 2017/07/11 v3
# gpg: Signature made Fri 14 Jul 2017 16:09:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-sockets-2017-07-11-3:
io: preserve ipv4/ipv6 flags when resolving InetSocketAddress
sockets: ensure we don't accept IPv4 clients when IPv4 is disabled
sockets: don't block IPv4 clients when listening on "::"
sockets: ensure we can bind to both ipv4 & ipv6 separately
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original InetSocketAddress struct may have has_ipv4 and
has_ipv6 fields set, which will control both the ai_family
used during DNS resolution, and later use of the V6ONLY
flag.
Currently the standalone DNS resolver code drops the
has_ipv4 & has_ipv6 flags after resolving, which means
the later bind() code won't correctly set V6ONLY.
This fixes the following scenarios
-vnc :0,ipv4=off
-vnc :0,ipv6=on
-vnc :::0,ipv4=off
-vnc :::0,ipv6=on
which all mistakenly accepted IPv4 clients
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if you disable listening on IPv4 addresses, via the
CLI flag ipv4=off, we still mistakenly accept IPv4 clients via
the IPv6 listener socket due to IPV6_V6ONLY flag being unset.
We must ensure IPV6_V6ONLY is always set if ipv4=off
This fixes the following scenarios
-incoming tcp::9000,ipv6=on
-incoming tcp:[::]:9000,ipv6=on
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv6=on
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv6=on
which all mistakenly accepted IPv4 clients
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When inet_parse() parses the hostname, it is forcing the
has_ipv6 && ipv6 flags if the address contains a ":". This
means that if the user had set the ipv4=on flag, to try to
restrict the listener to just ipv4, an error would not have
been raised. eg
-incoming tcp:[::]:9000,ipv4
should have raised an error because listening for IPv4
on "::" is a non-sensical combination. With this removed,
we now call getaddrinfo() on "::" passing PF_INET and
so getaddrinfo reports an error about the hostname being
incompatible with the requested protocol:
qemu-system-x86_64: -incoming tcp:[::]:9000,ipv4: address resolution
failed for :::9000: Address family for hostname not supported
Likewise it is explicitly setting the has_ipv4 & ipv4
flags when the address contains only digits + '.'. This
has no ill-effect, but also has no benefit, so is removed.
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When binding to an IPv6 socket we currently force the
IPV6_V6ONLY flag to off. This means that the IPv6 socket
will accept both IPv4 & IPv6 sockets when QEMU is launched
with something like
-vnc :::1
While this is good for that case, it is bad for other
cases. For example if an empty hostname is given,
getaddrinfo resolves it to 2 addresses 0.0.0.0 and ::,
in that order. We will thus bind to 0.0.0.0 first, and
then fail to bind to :: on the same port. The same
problem can happen if any other hostname lookup causes
the IPv4 address to be reported before the IPv6 address.
When we get an IPv6 bind failure, we should re-try the
same port, but with IPV6_V6ONLY turned on again, to
avoid clash with any IPv4 listener.
This ensures that
-vnc :1
will bind successfully to both 0.0.0.0 and ::, and also
avoid
-vnc :1,to=2
from mistakenly using a 2nd port for the :: listener.
This is a regression due to commit 396f935 "ui: add ability to
specify multiple VNC listen addresses".
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the host supports keyless subset (KSS) then first level
guest (G2) should enable KSS facility as well.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add esop and esop2 features to z12 model where esop2 was originally
introduced. Disable esop and esop2 when using compatibility machine
v2.9 or earlier.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In QEMU, a guest VCPU always started in and never was able to leave
z/Architecture mode. Now we have an architected way of showing this
condition.
The SIGP SET ARCHITECTURE instruction is simply rejected. Linux as guest
seems to not care about the return value, which is a good thing
The new handling is just like already being in z/Architecture mode.
We'll not try to fake absence of this facility, but still not indicate
the facility in case some strange CPU model turned z/Architecture off
completely (which doesn't work either way but let's us see how a
guest would react on a lack of this facility).
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
zPCI instructions and facilities are available since IBM zEnterprise
EC12. To support z/PCI in QEMU we enable zpci, aen and ais facilities
starting with zEC12 GA1. And we always set zpci and aen bits in max cpu
model. Later they might be switched off due to applied real cpu model.
For ais bit, we only provide it in the full cpu model beginning with
zEC12 and defer its enablement in the default cpu model to a later point
in time. At the same time, disable them for 2.9 and older machines.
Because of introducing AIS facility, we could check if it's enabled to
initialize flic->ais_supported with the real value.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
By initializing the CPU firstly, we are able to retrieve and use the
CPU model features when initializing other subsystem or devices.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
rebuild after the following commits
4b996d0 pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
e6879a6 pc-bios/s390-ccw: Add virtio-net driver code
766500f pc-bios/s390-ccw: Add core files for the network bootloading program
f807e55 pc-bios/s390-ccw: Add code for virtio feature negotiation
b4e3b4f pc-bios/s390-ccw: Remove unused structs from virtio.h
dd3dc5e pc-bios/s390-ccw: Move byteswap functions to a separate header
a20b4fe pc-bios/s390-ccw: Add a write() function for stdio
262e07c pc-bios/s390-ccw: Move virtio-block related functions into a separate file
7438d32 pc-bios/s390-ccw: Move ebc2asc to sclp.c
8760bad pc-bios/s390-ccw: Move libc functions to separate header
c68f450 pc-bios/s390-ccw: use STRIP variable in Makefile
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It's already possible to do a network boot of an s390x guest with an
external netboot image based on a Linux installation, but it would
be much more convenient if the s390-ccw firmware supported network
booting right out of the box, without the need to assemble such an
external image first.
This is an s390-netboot.img that can be used for network booting.
You can download a combined kernel + initrd image via TFTP
by starting QEMU for example with:
qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \
-netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img
Note that this version does not support downloading via config
files (i.e. pxelinux config files or .INS config files) yet. This
will be added later.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Most of the code has been taken from SLOF's netload.c file. Now we
can finally load an image via TFTP and execute the downloaded kernel.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-12-git-send-email-thuth@redhat.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The driver provides the recv() and send() functions which will
be required by SLOF's libnet code for receiving and sending
packets.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-11-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is just a preparation for the next steps: Add a makefile and a
stripped down copy of pc-bios/s390-ccw/main.c as a basis for the network
bootloader program, linked against the libc from SLOF already (which we
will need for SLOF's libnet). The networking code is not included yet.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-10-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We need the latest fixes for building the libc and libnet
of SLOF for the s390-ccw network bootloader firmware.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-9-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The upcoming virtio-net driver needs to negotiate some features,
so we need the possibility to do this in the core virtio code.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-8-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Looks like they have never been used, so let's simply remove them.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-7-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We'll need them in code that is not related to bootmap.h, so
they should reside in an independent header.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-6-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The stdio functions from the SLOF libc need a write() function for
printing text to stdout/stderr. Let's implement this function by
refactoring the code from sclp_print().
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-5-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The netboot code is going to link against the code from virtio.c, too, so
we've got to move the virtio-block and -scsi related code out of the way.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-4-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We will later need this array in a file that we will link to the
netboot code, too. Since there is some ebcdic conversion done
in sclp_get_loadparm_ascii(), the sclp.c file seems to be a good
candidate.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-3-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The upcoming netboot code will use the libc from SLOF. To be able
to still use s390-ccw.h there, the libc related functions in this
header have to be moved to a different location.
And while we're at it, remove the duplicate memcpy() function from
sclp.c.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-2-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Turn on migration for the channel subsystem for the next machine. For
legacy machines we still have to do things the old way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since we are going to need a migration compatibility breaking change to
activate ChannelSubSys migration let us use the opportunity to introduce
ORB to the SubchDev before that (otherwise we would need separate
handling e.g. a compat property).
The ORB will be useful for implementing IDA, or async handling of
subchannel work.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-5-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Although we have recently vmstatified the migration of some css
infrastructure, for some css entities there is still state to be
migrated left, because the focus was keeping migration stream
compatibility (that is basically everything as-is).
Let us add vmstate helpers and extend existing vmstate descriptions so
that we have everything we need. Let us guard the added state via
css_migration_enabled, so we keep the compatible behavior if css
migration is disabled.
Let's also annotate the bits which do not need to be migrated for better
readability.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170711145441.33925-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently the migration of the channel subsystem (css) is only partial
and is done by the virtio ccw proxies -- the only migratable css devices
existing at the moment.
With the current work on emulated and passthrough devices we need to
decouple the migration of the channel subsystem state from virtio ccw,
and have a separate section for it. A new section however necessarily
breaks the migration compatibility.
So let us introduce a switch at the machine class, and put it in 'off'
state for now. We will turn the switch 'on' for future machines once all
preparations are met. For compatibility machines the switch will stay
'off'.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We will need the machine class at machine initialization time, so the
usual way via qdev won't do. Let's cache the machine class and also use
the default values of the base machine for capability discovery.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's use the new inject_airq callback of flic to inject adapter
interrupts. For kvm case, if the kernel flic doesn't support the new
interface, the irq routine remains unchanged. For non-kvm case,
qemu-flic handles the suppression process.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's introduce a specialized way to inject adapter interrupts that,
unlike the common interrupt injection method, allows to take the
characteristics of the adapter into account.
For adapters subject to AIS facility:
- for non-kvm case, we handle the suppression for a given ISC in QEMU.
- for kvm case, we pass adapter id to kvm to do airq injection.
Add add tracepoint for suppressed airq and suppressing airq.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to emulate the adapter interruption suppression (AIS)
facility properly, the guest needs to be able to modify the AIS mask.
Interrupt suppression will be handled via the flic (for kvm, via a
recently introduced kernel backend; for !kvm, in the flic code), so
let's introduce a method to change the mode via the flic interface.
We introduce the 'simm' and 'nimm' fields to QEMUS390FLICState
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:
interruption mode | simm bit | nimm bit
------------------|----------|----------
ALL | 0 | 0
SINGLE | 1 | 0
NO | 1 | 1
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Paolo Bonzini