In struct arm_boot_info, kernel_filename, initrd_filename and
kernel_cmdline are copied from from MachineState. This patch add
MachineState as a parameter into arm_load_dtb() and move the copy chunk
of kernel_filename, initrd_filename and kernel_cmdline into
arm_load_kernel().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-2-tao3.xu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Cédric Le Goater <clg@kaod.org>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit a5e0b3311 removed these in favour of querying machine
properties. Remove the extern declarations as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190711130546.18578-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Like Xu <like.xu@linux.intel.com>
Fixes: a5e0b33119 ("vl.c: Replace smp global variables with smp machine properties")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190827140241.20818-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most tracing backends are implemented within QEMU, except the
DTrace/SystemTap backends.
One side effect is when running 'qemu -trace help', an incomplete
list of trace events is displayed when using the DTrace/SystemTap
backends.
This is partly due to trace events registered as modules with
trace_init(), and since the events are not used within QEMU,
the linker optimize and remove the unused modules (which is
OK in this particular case).
Currently only the events compiled in trace-root.o and in the
last trace.o member of libqemuutil.a are linked, resulting in
an incomplete list of events.
To avoid confusion, improve the help message, recommending to
use the proper systemtap script to display the events list.
Before:
$ lm32-softmmu/qemu-system-lm32 -trace help 2>&1 | wc -l
70
After:
$ lm32-softmmu/qemu-system-lm32 -trace help
Run 'qemu-trace-stap list qemu-system-lm32' to print a list
of names of trace points with the DTrace/SystemTap backends.
$ qemu-trace-stap list qemu-system-lm32 | wc -l
1136
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190823142203.5210-1-philmd@redhat.com
Message-Id: <20190823142203.5210-1-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-13-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement and use new interface to get rid of hd_qiov.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-12-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-12-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use buffer based io in encrypted case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-11-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-11-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce extended variants of bdrv_co_preadv and bdrv_co_pwritev
with qiov_offset parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-10-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-10-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_aligned_pwritev.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-9-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-9-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_co_do_copy_on_readv.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-8-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-8-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allocate bounce_buffer only if it is really needed. Also, sub-optimize
allocation size (why not?).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-7-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-7-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use and support new API in bdrv_co_do_copy_on_readv. Note that in case
of allocated-in-top we need to shrink read size to MIN(..) by hand, as
pre-patch this was actually done implicitly by qemu_iovec_concat (and
we used local_qiov.size).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-6-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-6-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add handlers supporting qiov_offset parameter:
bdrv_co_preadv_part
bdrv_co_pwritev_part
bdrv_co_pwritev_compressed_part
This is used to reduce need of defining local_qiovs and hd_qiovs in all
corners of block layer code. The following patches will increase usage
of this new API part by part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-5-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-5-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have similar padding code in bdrv_co_pwritev,
bdrv_co_do_pwrite_zeroes and bdrv_co_preadv. Let's combine and unify
it.
[Squashed in Vladimir's qemu-iotests 077 fix
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-4-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-4-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We'll need to check a part of qiov soon, so implement it now.
Optimization with align down to 4 * sizeof(long) is dropped due to:
1. It is strange: it aligns length of the buffer, but where is a
guarantee that buffer pointer is aligned itself?
2. buffer_is_zero() is a better place for optimizations and it has
them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-3-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-3-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce new initialization API, to create requests with padding. Will
be used in the following patch. New API uses qemu_iovec_init_buf if
resulting io vector has only one element, to avoid extra allocations.
So, we need to update qemu_iovec_destroy to support destroying such
QIOVs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-2-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-2-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When QEMU receives a xenstore watch event suggesting that the "state"
of the frontend changed, it records this in its own state but it also
re-write the value back into xenstore even so there were no change.
This triggers an unnecessary xenstore watch event which QEMU will
process again (and maybe the frontend as well). Also QEMU could
potentially write an already old value.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190823101534.465-3-anthony.perard@citrix.com>
When a frontend wants to reset its state and the backend one, it
starts with setting "Closing", then waits for the backend (QEMU) to do
the same.
But when QEMU is setting "Closing" to its state, it triggers an event
(xenstore watch) that re-execute xen_device_backend_changed() and set
the backend state to "Closed". QEMU should wait for the frontend to
set "Closed" before doing the same.
Before setting "Closed" to the backend_state, we are also going to
check if there is a frontend. If that the case, when the backend state
is set to "Closing" the frontend should react and sets its state to
"Closing" then "Closed". The backend should wait for that to happen.
Fixes: b6af8926fb
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190823101534.465-2-anthony.perard@citrix.com>
Device model is supposed to destroy IOREQ server for itself.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <1564428563-1006-1-git-send-email-igor.druzhinin@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The xen_[rw]?mb() macros defined in ring.h can't be used and the fact
that there are gated behind __XEN_INTERFACE_VERSION__ means that it
needs to be defined somewhere. QEMU doesn't implement interfaces with
the Xen hypervisor so defining __XEN_INTERFACE_VERSION__ is pointless.
This leads to:
include/hw/xen/io/ring.h:47:5: error: "__XEN_INTERFACE_VERSION__"
is not defined, evaluates to 0 [-Werror=undef]
Cleanup ring.h. The xen_*mb() macros are already defined in xenctrl.h
which is included in xen_common.h.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190704153605.4140-1-anthony.perard@citrix.com>
[aperard: Adding the comment proposed upstream]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Commit e41c945297 ("target/alpha: Convert to CPUClass::tlb_fill")
slightly changed the way the trap_arg2 value is computed in case of TLB
fill. The type of the variable used in the ternary operator has been
changed from an int to an enum. This causes the -1 value to not be
sign-extended to 64-bit in case of an instruction fetch. The trap_arg2
ends up with 0xffffffff instead of 0xffffffffffffffff. Fix that by
changing the -1 into -1LL.
This fixes the execution of user space processes in qemu-system-alpha.
Fixes: e41c945297
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[rth: Test MMU_DATA_LOAD and MMU_DATA_STORE instead of implying them.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
$(call land, $(CONFIG_SPICE), $(CONFIG_GIO)) will never return "m" so
ui-spice-app is always linked into QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a missing cast; this fixes a build failure with --enable-modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
-----BEGIN PGP SIGNATURE-----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=adkl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/autofree-pull-request' into staging
require newer glib2 to enable autofree'ing of stack variables exiting scope
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
# gpg: Signature made Thu 22 Aug 2019 11:51:59 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/autofree-pull-request:
crypto: use auto cleanup for many stack variables
crypto: define cleanup functions for use with g_autoptr
glib: bump min required glib library version to 2.48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
The qemu commit e6cc11d64f
has already resolved the issue for vhost scsi devices but
the fix was never applied to vhost-user scsi devices.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com
Message-Id: <1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tests/test-bdrv-drain /bdrv-drain/iothread/drain test case does the
following:
1. The preadv coroutine calls aio_bh_schedule_oneshot() and then yields.
2. The one-shot BH executes in another AioContext. All it does is call
aio_co_wakeup(preadv_co).
3. The preadv coroutine is re-entered and returns.
There is a race condition in aio_co_wake() where the preadv coroutine
returns and the test case destroys the preadv IOThread. aio_co_wake()
can still be running in the other AioContext and it performs an access
to the freed IOThread AioContext.
Here is the race in aio_co_schedule():
QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
co, co_scheduled_next);
<-- race: co may execute before we invoke qemu_bh_schedule()!
qemu_bh_schedule(ctx->co_schedule_bh);
So if co causes ctx to be freed then we're in trouble. Fix this problem
by holding a reference to ctx.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190723190623.21537-1-stefanha@redhat.com
Message-Id: <20190723190623.21537-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Skip the tests if socket_check_protocol_support() failed, but do run
g_test_run() to keep TAP harness happy.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
getaddrinfo() may succeed with PF_UNSPEC, but fail when more specific.
(this allows to skip some tests that would fail under podman)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a --engine option to select either docker, podman or auto.
Among other advantages, podman allows to run rootless & daemonless
containers, fortunately sharing compatible CLI with docker.
With current podman, we have to use a uidmap trick in order to be able
to rw-share the ccache directory with the container user.
With a user 1000, the default mapping is: 1000 (host) -> 0 (container).
So write access to /var/tmp/ccache ends will end with permission
denied error.
With "--uidmap 1000:0:1 --uidmap 0:1:1000", the mapping is:
1000 (host) -> 0 (container, 1st namespace) -> 1000 (container, 2nd namespace).
(the rest is mumbo jumbo to avoid holes in the range of UIDs)
A future podman version may have an option such as --userns-keep-uid.
Thanks to Debarshi Ray <rishi@redhat.com> for the help!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(podman will need further tweaks)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Factor it out, add a comment how it all works, and also use it in the
REAL MMU.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Any access sets the reference bit. In case we have a read-fault, we
should not allow writes to the TLB entry if the change bit was not
already set.
This is a preparation for proper storage-key reference/change bit handling
in TCG and a fix for KVM whereby read accesses would set the change
bit (old KVM versions without the ioctl to carry out the translation).
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Whenever we modify a storage key, we should flush the TLBs of all CPUs,
so the MMU fault handling code can properly consider the changed storage
key (to e.g., properly set the reference and change bit on the next
accesses).
These functions are barely used in modern Linux guests, so the performance
implications are neglectable for now.
This is a preparation for better reference and change bit handling for
TCG, which will require more MMU changes.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-5-david@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instructions are always fetched from primary address space, except when
in home address mode. Perform the selection directly in cpu_mmu_index().
get_mem_index() is only used to perform data access, instructions are
fetched via cpu_lduw_code(), which translates to cpu_mmu_index(env, true).
We don't care about restricting the access permissions of the TLB
entries anymore, as we no longer enter PRIMARY entries into the
SECONDARY MMU. Cleanup related code a bit.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190816084708.602-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's select the ASC before calling the function. This is a prepararion
to remove the ASC magic depending on the access mode from mmu_translate.
There is currently no way to distinguish if we have code or data access.
For now, we were using code access, because especially when debugging with
the gdbstub, we want to read and disassemble what we single-step.
Note: KVM guest can now no longer be crashed using qmp/hmp/gdbstub if they
happen to be in AR mode.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to trace the actual return value, not "0".
Fixes: 0f5f669147 ("s390x: Enable new s390-storage-keys device")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>