The 32-bit PMIN/PMAX has been decomposed to scalars,
and so can be trivially expanded inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we're now handling a == b generically, we no longer need
to do it by hand within target/arm/.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 91c1e9fcbd where we added dual-CPU support to
the ARMSSE, we set up the wiring of the expansion IRQs via nested
loops: the outer loop on 'i' loops for each CPU, and the inner loop
on 'j' loops for each interrupt. Fix a typo which meant we were
wiring every expansion IRQ line to external IRQ 0 on CPU 0 and
to external IRQ 1 on CPU 1.
Fixes: 91c1e9fcbd ("hw/arm/armsse: Support dual-CPU configuration")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The code for handling the NVIC SHPR1 register intends to permit
byte and halfword accesses (as the architecture requires). However
the 'case' line for it only lists the base address of the
register, so attempts to access bytes other than the first one
end up in the "bad write" default logic. This bug was added
accidentally when we split out the SHPR1 logic from SHPR2 and
SHPR3 to support v6M.
Fixes: 7c9140afd5 ("nvic: Handle ARMv6-M SCS reserved registers")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
The Zephyr RTOS happens to access SHPR1 byte at a time,
which is how I spotted this.
Peter Crosthwaite hasn't had the bandwidth to do code review or
other QEMU work for some time now -- remove his email address
from MAINTAINERS file entries so we don't bombard him with
patch emails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190207181422.4907-1-peter.maydell@linaro.org
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Dongjiu Geng <gengdongjiu@huawei.com>
Userspace programs should (in theory) query the ELF HWCAP before
probing these registers. Now we have implemented them all make it
public.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205190224.2198-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a whole bunch more registers in the CPUID space which are
currently not used but are exposed as RAZ. To avoid too much
duplication we expand ARMCPRegUserSpaceInfo to understand glob
patterns so we only need one entry to tweak whole ranges of registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-5-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As this is a single register we could expose it with a simple ifdef
but we use the existing modify_arm_cp_regs mechanism for consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-4-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of CPUID registers are exposed to userspace by modern Linux
kernels thanks to the "ARM64 CPU Feature Registers" ABI. For QEMU's
user-mode emulation we don't need to emulate the kernels trap but just
return the value the trap would have done. To avoid too much #ifdef
hackery we process ARMCPRegInfo with a new helper (modify_arm_cp_regs)
before defining the registers. The modify routine is driven by a
simple data structure which describes which bits are exported and
which are fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-3-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although technically not visible to userspace the kernel does make
them visible via a trap and emulate ABI. We provide a new permission
mask (PL0U_R) which maps to PL0_R for CONFIG_USER builds and adjust
the minimum permission check accordingly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lo,hi order is different from the comments. And in commit
1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128"), it changes
the original code logic. So just restore the old code logic before this
commit:
do_paired_cmpxchg64_be():
cmpv = int128_make128(env->exclusive_high, env->exclusive_val);
newv = int128_make128(new_hi, new_lo);
This fixes a bug that would only be visible for big-endian
AArch64 guest code.
Fixes: 1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128")
Signed-off-by: Catherine Ho <catherine.hecx@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1548985244-24523-1-git-send-email-catherine.hecx@gmail.com
[PMM: added note that bug only affects BE guests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HACR_EL2 is a register with IMPDEF behaviour, which allows
implementation specific trapping to EL2. Implement it as RAZ/WI,
since QEMU's implementation has no extra traps. This also
matches what h/w implementations like Cortex-A53 and A57 do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205181218.8995-1-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcZZvnAAoJENSXKoln91plz6UH/iqtHfPhGEj6o4CGFIx/8Ru/
k7XU552LgTGvIA1aHt9+dHNYWW/JRl1CvmdeECeAN/yFkKSdDmruW6hLV78dV6Jy
8xnnYt8bQhMfMSCIlkGh+CxFF0BCRoPrtH64ZVgZ9AnN00E6hyFlTHAYJEk8ZlcM
ov05JYneKlZWYDcJnYaGX6T7s8ALcq2O6FDUS88J9AiN303yt+kmaEC2WEt+xju4
+xPPBIIg8nqd3MlrQ/shpFcCOTN0OLQ4V5mQYLvbL3HGTzeZ8eYBRdqQ2DXpW8M8
OOFGhJrmfBYEC/me0T7suZnzLLNGGYz2jQWLlHy32COIAJv6GcUylGd9TDbGGP8=
=Py0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-feb-14-2019' into staging
MIPS queue for February 14th, 2019
# gpg: Signature made Thu 14 Feb 2019 16:48:39 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-14-2019:
tests/tcg: target/mips: Add tests for MSA logic instructions
tests/tcg: target/mips: Add wrappers for MSA logic instructions
tests/tcg: target/mips: Add tests for MSA interleave instructions
tests/tcg: target/mips: Add wrappers for MSA interleave instructions
tests/tcg: target/mips: Add tests for MSA bit counting instructions
tests/tcg: target/mips: Add wrappers for MSA bit counting instructions
tests/tcg: target/mips: Add a header with test utilities
tests/tcg: target/mips: Add a header with test inputs
tests/tcg: target/mips: Remove an unnecessary file
target/mips: introduce MTTCG-enabled builds
hw/mips_cpc: kick a VP when putting it into Run statewq
target/mips: hold BQL in mips_vpe_wake()
hw/mips_int: hold BQL for all interrupt requests
target/mips: reimplement SC instruction emulation and use cmpxchg
target/mips: compare virtual addresses in LL/SC sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tests for MSA logic instructions. This includes following
instructions:
* AND.V - logical AND
* NOR.V - logical NOR
* OR.V - logical OR
* XOR.V - logical XOR
Each test consists of 80 test cases, so altogether there are 320
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA logic instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA interleave instructions. This includes following
instructions:
* ILVEV.B - interleave even (bytes)
* ILVEV.H - interleave even (halfwords)
* ILVEV.W - interleave even (words)
* ILVEV.D - interleave even (doublewords)
* ILVOD.B - interleave odd (bytes)
* ILVOD.H - interleave odd (halfwords)
* ILVOD.W - interleave odd (words)
* ILVOD.D - interleave odd (doublewords)
* ILVL.B - interleave left (bytes)
* ILVL.H - interleave left (halfwords)
* ILVL.W - interleave left (words)
* ILVL.D - interleave left (doublewords)
* ILVR.B - interleave right (bytes)
* ILVR.H - interleave right (halfwords)
* ILVR.W - interleave right (words)
* ILVR.D - interleave right (doublewords)
Each test consists of 80 test cases, so altogether there are 1280
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA interleave instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA bit counting instructions. This includes following
instructions:
* NLOC.B - number of leading ones (bytes)
* NLOC.H - number of leading ones (halfwords)
* NLOC.W - number of leading ones (words)
* NLOC.D - number of leading ones (doublewords)
* NLZC.B - number of leading zeros (bytes)
* NLZC.H - number of leading zeros (halfwords)
* NLZC.W - number of leading zeros (words)
* NLZC.D - number of leading zeros (doublewords)
* PCNT.B - population count / number of ones (bytes)
* PCNT.H - population count / number of ones (halfwords)
* PCNT.W - population count / number of ones (words)
* PCNT.D - population count / number of ones (doublewords)
Each test consists of 80 test cases, so altogether there are 960 test
cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains wrappers around MSA instructions assembler
invocations. For now, only bit counting instructions (NLOC, NLZC, and
PCNT; each in four data format flavors) are supported.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains test utilities. For now, it contains
only a function for checking and printing test results for bit
counting and similar MSA instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The file tests/tcg/mips/include/test_inputs.h is planned to
contain various test inputs. For now, it contains 64 128-bit
pattern inputs (alternating groups od ones and zeroes) and
16 128-bit random inputs.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a file that was added long time ago by mistake. The commit
that introduced this file was commit d70080c4 (from 2012).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
While testing mttcg VP0 could get stuck in a loop waiting for other
VPs to come up (which never actually happens). To fix this, kick VPs
while they are being powered up by Cluster Power Controller in an
async task which is triggered once the host thread is being spawned.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Hold BQL whenever mips_vpe_wake() is invoked.
Without this patch, MIPS MT with MTTCG enabled triggers an abort in
tcg_handle_interrupt() due to an unlocked access to cpu_interrupt().
This patch makes sure that the BQL is held in this case.
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make sure BQL is held for all interrupt requests.
For MTTCG-enabled configurations, handling soft and hard interrupts
between vCPUs must be properly locked. By acquiring BQL, make sure
all paths triggering an IRQ are synchronized.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Completely rewrite conditional stores handling. Use cmpxchg.
This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Do only virtual addresses comaprisons in LL/SC sequence emulations.
Until this patch, physical addresses had been compared in SC part of
LL/SC sequence, even though such comparisons could be avoided. Getting
rid of them allows throwing away SC helpers and having common SC
implementations in user and system mode, avoiding the need for two
separate implementations selected by #ifdef CONFIG_USER_ONLY.
Correct guest software should not rely on LL/SC if they accesses the
same physical address via different virtual addresses or if page
mapping gets changed between LL/SC due to manipulating TLB entries.
MIPS Instruction Set Manual clearly says that an RMW sequence must
use the same address in the LL and SC (virtual address, physical
address, cacheability and coherency attributes must be identical).
Otherwise, the result of the SC is not predictable. This patch takes
advantage of this fact and removes the virtual->physical address
translation from SC helper.
lladdr served as Coprocessor 0 LLAddr register which captures physical
address of the most recent LL instruction, and also lladdr was used
for comparison with following SC physical address. This patch changes
the meaning of lladdr - now it will only keep the virtual address of
the most recent LL. Additionally, CP0_LLAddr field is introduced which
is the actual Coperocessor 0 LLAddr register that guest can access.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----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=I5Qi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chardev-pull-request' into staging
Chardev fixes
# gpg: Signature made Wed 13 Feb 2019 16:18:36 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chardev-pull-request: (25 commits)
char-pty: remove write_lock usage
char-pty: remove the check for connection on write
chardev: add a note about frontend sources and context switch
terminal3270: do not use backend timer sources
char: update the mux handlers in class callback
chardev/wctablet: Fix a typo
char: allow specifying a GMainContext at opening time
chardev: ensure termios is fully initialized
tests: expand coverage of socket chardev test
chardev: fix race with client connections in tcp_chr_wait_connected
chardev: disallow TLS/telnet/websocket with tcp_chr_wait_connected
chardev: honour the reconnect setting in tcp_chr_wait_connected
chardev: use a state machine for socket connection state
chardev: split up qmp_chardev_open_socket connection code
chardev: split tcp_chr_wait_connected into two methods
chardev: remove unused 'sioc' variable & cleanup paths
chardev: ensure qemu_chr_parse_compat reports missing driver error
chardev: remove many local variables in qemu_chr_parse_socket
chardev: forbid 'wait' option with client sockets
chardev: forbid 'reconnect' option with server sockets
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch set contains a handful of patches I've collected over the
last few weeks. There's nothing really fundamental, but I thought it
would be good to send these out now as there are some other patch sets
on the mailing list that are getting ready to go.
As far as the actual patches, there's:
* A set that cleans up our FS dirty-mode handling.
* Support for writing MISA.
* The removal of Michael as a maintainer.
* A fix to {m,s}counteren handling.
* A fix to make sure the kernel's start address is computed correctly on
32-bit targets.
This makes my "RISC-V Patches for 3.2, Part 3" pull request defunct, as
it contains the same patches but based on a newer master. As usual,
I've tested this using a Fedora boot on the latest Linux. This patch
set does not include Bastian's decodetree patches because there were
some merge conflicts and while I've cleaned them up I want to get a
round of review first.
-----BEGIN PGP SIGNATURE-----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=Q/8G
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-sf1' into staging
RISC-V Patches for the 4.0 Soft Freeze, Part 1
This patch set contains a handful of patches I've collected over the
last few weeks. There's nothing really fundamental, but I thought it
would be good to send these out now as there are some other patch sets
on the mailing list that are getting ready to go.
As far as the actual patches, there's:
* A set that cleans up our FS dirty-mode handling.
* Support for writing MISA.
* The removal of Michael as a maintainer.
* A fix to {m,s}counteren handling.
* A fix to make sure the kernel's start address is computed correctly on
32-bit targets.
This makes my "RISC-V Patches for 3.2, Part 3" pull request defunct, as
it contains the same patches but based on a newer master. As usual,
I've tested this using a Fedora boot on the latest Linux. This patch
set does not include Bastian's decodetree patches because there were
some merge conflicts and while I've cleaned them up I want to get a
round of review first.
# gpg: Signature made Wed 13 Feb 2019 15:37:50 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-sf1:
riscv: Ensure the kernel start address is correctly cast
target/riscv: fix counter-enable checks in ctr()
MAINTAINERS: Remove Michael Clark as a RISC-V Maintainer
RISC-V: Add misa runtime write support
RISC-V: Add misa.MAFD checks to translate
RISC-V: Add misa to DisasContext
RISC-V: Add priv_ver to DisasContext
RISC-V: Use riscv prefix consistently on cpu helpers
RISC-V: Implement mstatus.TSR/TW/TVM
RISC-V: Mark mstatus.fs dirty
RISC-V: Split out mstatus_fs from tb_flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current check to test if usbfs support should be compiled or not
solely relies on the presence of <linux/usbdevice_fs.h>, without
actually checking that all definition used by Qemu are provided by
this header file.
With sufficiently old kernel headers, <linux/usbdevice_fs.h> may be
present, but some of the definitions needed by Qemu may not be
available.
This commit improves the check by building a small program that
actually tests whether the necessary definitions are available.
In addition, it fixes a bug where have_usbfs was set to "yes"
regardless of the result of the test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190213211827.20300-1-thomas.petazzoni@bootlin.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sun4uv_init() function expects vga_interface_type to be either
VGA_STD or VGA_NONE and sets up a stdvga device or no vga card
accordingly.
However, the code in vl.c prefers the Cirrus VGA card to stdvga if
it is available and the user and the machine did not specify anything
else.
So far this has not been a problem, since the Cirrus VGA was not linked
into the sparc64 target. But with the upcoming Kconfig build system,
all theoretically possible PCI cards will be enabled by default, so the
Cirrus VGA card might become available on the sparc64 target, too. vl.c
then picks the wrong card, causing sun4uv_init() to abort.
Thus let's make it explicit that we always want stdvga for sparc64 and
so set default_display = "std" for these machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1550041639-10232-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Kill off a pile of monitor_printf's and cur_mon usage.
The only one left in wavcapture.c is the info case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170320173840.3626-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a couple of traces around the kvm_set_ioeventfd* calls.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190212134758.10514-4-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Always make error messages start with 'Error:' as a fallback
to make sure that anything parsing them can tell it failed.
Note: Some places don't use hmp_handle_error
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190212134758.10514-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20181016112232.23241-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have now managed to eradicate all the places in the codebase
that triggered clang's -Waddress-of-packed-member warning. Remove
the compiler flag that exempted it from our usual -Werror policy.
This will prevent any new problematic code being added in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190208132112.31493-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The NetBSD support in Intel HAXM has beem merged upstream and is functional.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190207233704.29978-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This looks like a leftover that was never implemented.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190207193605.25676-2-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The option is only a dummy since a long time. We've finally deprecated
it in QEMU v3.0, so it's time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1549545296-18903-3-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Richard Henderson