Commit Graph

305 Commits

Author SHA1 Message Date
qiaonuohan 7d6dc7f30c dump: add 'query-dump-guest-memory-capability' command
'query-dump-guest-memory-capability' is used to query the available formats for
'dump-guest-memory'. The output of the command will be like:

-> { "execute": "query-dump-guest-memory-capability" }
<- { "return": { "formats":
                    ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }

Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28 11:52:03 -05:00
qiaonuohan b53ccc30c4 dump: make kdump-compressed format available for 'dump-guest-memory'
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:

  dump [-p] protocol [begin] [length] [format]

'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.

Note:
  1. The kdump-compressed format is readable only with the crash utility and
     makedumpfile, and it can be smaller than the ELF format because of the
     compression support.
  2. The kdump-compressed format is the 6th edition.

Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28 11:52:03 -05:00
Michael R. Hines 41310c6878 rdma: rename 'x-rdma' => 'rdma'
As far as we can tell, all known bugs have been fixed:

1. Parallel migrations are working
2. IPv6 migration is working
3. virt-test is working

I'm not comfortable sending the revised libvirt patch
until this is accepted or review suggestions are addressed,
(including pin-all support. It does not make sense to
remove experimental for one thing and not the other. That's
too many trips through the libvirt community).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-25 14:30:28 +01:00
Benoît Canet c88a1de51a quorum: Add quorum_open() and quorum_close().
Example of command line:

-drive if=virtio,driver=quorum,\
children.0.file.filename=1.raw,\
children.0.node-name=1.raw,\
children.0.driver=raw,\
children.1.file.filename=2.raw,\
children.1.node-name=2.raw,\
children.1.driver=raw,\
children.2.file.filename=3.raw,\
children.2.node-name=3.raw,\
children.2.driver=raw,\
vote-threshold=2

blkverify=on with vote-threshold=2 and two files can be passed to
emulate blkverify.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 22:29:51 +01:00
Peter Maydell 61e8a92364 QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
 * NAND fix for "info qtree"
 * Cleanup and extension of QOM machine tests
 * IndustryPack test cases and conversion to QOM realize
 * I2C cleanups
 * Cleanups of legacy qdev properties
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
 vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
 DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
 9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
 4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
 q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
 XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
 HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
 FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
 hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
 PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
 O1CfsE7x0GH/Rbi/Hxhu
 =KRcc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 13:05:48 +00:00
Martin Kletzander 77d1c3c63f qmp: expose list of supported character device backends
Introduce 'query-chardev-backends' QMP command which lists all
supported character device backends.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Paolo Bonzini 104059da54 qdev: Add enum property types to QAPI schema
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:05 +01:00
Peter Lieven 6542aa9c75 block: add native support for NFS
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.

NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[&param2=value2[&...]]]

For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2

You need LibNFS from Ronnie Sahlberg available at:
   git://github.com/sahlberg/libnfs.git
for this to work.

During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.

Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.

For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
   https://raw.github.com/sahlberg/libnfs/master/README

Supported by qemu are the uid, gid and tcp-syncnt URL parameters.

LibNFS currently support NFS version 3 only.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09 09:12:38 +01:00
Kevin Wolf b35ee7fb23 blkdebug: Make required alignment configurable
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 17:40:03 +01:00
Jeff Cody 3722290074 block: update block commit documentation regarding image truncation
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.

In the case of the base image being smaller, it is resized to the
larger size of the snapshot image.  In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:12:49 +01:00
Benoît Canet 0901f67ecd qmp: Allow to take external snapshots on bs graphs node.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 3b1dbd11a6 qmp: Allow block_resize to manipulate bs graph nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 12d3ba821d qmp: Allow to change password on named block driver states.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>

There was two candidate ways to implement named node manipulation:

1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
                                      '*node-name': 'str', 'password': 'str'}
}

2)

{ 'command': 'block_passwd', 'data': {'device': 'str',
                                      '*device-is-node': 'bool',
                                      'password': 'str'} }

Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.

Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.

Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.

Kevin argued that all bs are node including devices ones so 2 does not make
sense.

Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.

Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.

A vote has been done on the list to elect the version to use and 1 won.

For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet c13163fba1 qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet 6913c0c2ce block: Allow the user to define "node-name" option both on command line and QMP.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:06:47 +01:00
Fam Zheng c8059b97e1 qapi: Add "backing" to BlockStats
Currently there is no way to query BlockStats of the backing chain. This
adds "backing" field into BlockStats to make it possible.

The comment of "parent" is reworded.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 14:33:01 +01:00
Max Reitz 1bf20b8280 qapi: QMP interface for blkdebug and blkverify
Add structures to support blkdebug and blkverify in blockdev-add.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Edgar E. Iglesias 133fe77437 Merge remote branch 'luiz/queue/qmp' into qmpq
* luiz/queue/qmp:
  migration: qmp_migrate(): keep working after syntax error
  qerror: Remove assert_no_error()
  qemu-option: Remove qemu_opts_create_nofail
  target-i386: Remove assert_no_error usage
  hw: Remove assert_no_error usages
  qdev: Delete dead code
  error: Add error_abort
  monitor: add object-add (QMP) and object_add (HMP) command
  monitor: add object-del (QMP) and object_del (HMP) command
  qom: catch errors in object_property_add_child
  qom: fix leak for objects created with -object
  rng: initialize file descriptor to -1
  qemu-monitor: HMP cpu-add wrapper
  vl: add missing transition debug->finish_migrate

Message-Id: 1389045795-18706-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-14 12:10:08 +10:00
Paolo Bonzini cff8b2c6fc monitor: add object-add (QMP) and object_add (HMP) command
Add two commands that are the monitor counterparts of -object.  The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:47 -05:00
Paolo Bonzini ab2d0531b2 monitor: add object-del (QMP) and object_del (HMP) command
These two commands invoke the "unparent" method of Object.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:47 -05:00
Fam Zheng 20a63d2cec commit: Support commit active layer
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.

QMP documentation is updated.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20 16:26:16 +01:00
Stefan Hajnoczi c27de2a3e9 qapi-schema: fix QEMU 1.8 references
We are moving boldly on to QEMU 2.0 in the next release.  Some patches
written at a time where we assumed 1.8 would be the next version number
managed to sneak in.

s/1.8/2.0/ in qapi-schema.json

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-12-20 09:11:57 +01:00
Kevin Wolf 01443e1388 qapi-schema.json: Change 1.8 reference to 2.0
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13 14:49:50 +01:00
Vincenzo Maffione 58952137b0 net: Adding netmap network backend
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09 13:33:19 +01:00
Fam Zheng 21b5683508 qapi: Change BlockDirtyInfo to list
We have multiple dirty bitmaps in BDS now, switch QAPI to allow query
it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-29 13:40:36 +01:00
Max Reitz 1296c2f0bc qapi-schema: Update description for NewImageMode
If the NewImageMode is "absolute-paths" but no backing file is available
(e.g., when mirroring a device with an unbacked image), the target image
will not be backed either. This patch updates the documentation in
qapi-schema.json accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:06 +01:00
Fam Zheng a9a443c874 qapi: Fix comment for create-type to match code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-07 13:53:30 +01:00
Anthony Liguori a126050a10 Block patches for 1.7.0-rc0 (v2)
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJScnrnAAoJEH8JsnLIjy/WhhsP/2No1yEGNzfhw0WLDsEGBJI7
 zjG+QkRMO4q2t256SxNr84KBFJlYKBvGrx+W8xC66AdvR1feL5hmWdXAMTJovx6Z
 3Qt59RI9iISZ2OEtc9FhdsC+dSdM/3qie17XuuSCqifsi4xLjIZK/s18+RnLa0t/
 nRObYP4prRl0c3o1gKaUvNz2wkIqctQAIe8UQkn6R1vPC6D60m/H9dDj4Kj68HO0
 ICsF4AXBR/V2a8gU36/PGexBVyfgC4HOeuN0qNSTgYOKxLuNR+SrlzzhHE+jZTs5
 GASm3vg/vUgBOO1759X5T8hveO6yu8XL82l+/d5nIK4gYGORIQZT74dyV5JgQIlF
 Y47d0cF28+C/fuL1jh7c+2HY5WmmJQosMi9CaCBj0lvH0k5caEjqwPeHtRBmEyu3
 1wAcLQJowZrWB5ez9MjezsaL4sPCymvB/4F443xdz5V19mE41bLZGW2EIT7MXHY7
 IcwLU/opx76GMOFfWVMA7jeQkjiPaqGeaQHJzdnGUzIthqyiTigQMfi5P3nXGDic
 uQi+KrqP9lNpJlZk4xGQnFovHNmKZrnLhUvqOIPk7/wKMvlU6ewdzp5Fnwzqw4MW
 uJ/6eBJYolMyY+q37AH3Q6ZUkwTJi9O1drCPA0Ogr/dJiCyAiOoKuL0N74VabpcD
 AahXw+yYV0qh6H4YjOzW
 =wGCx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging

Block patches for 1.7.0-rc0 (v2)

# gpg: Signature made Thu 31 Oct 2013 04:44:39 PM CET using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

* kwolf/tags/for-anthony: (30 commits)
  vmdk: Implment bdrv_get_specific_info
  qapi: Add optional field 'compressed' to ImageInfo
  qemu-iotests: prefill some data to test image
  sheepdog: check simultaneous create in resend_aioreq
  sheepdog: cancel aio requests if possible
  sheepdog: make add_aio_request and send_aioreq void functions
  sheepdog: try to reconnect to sheepdog after network error
  coroutine: add co_aio_sleep_ns() to allow sleep in block drivers
  sheepdog: reload inode outside of resend_aioreq
  sheepdog: handle vdi objects in resend_aio_req
  sheepdog: check return values of qemu_co_recv/send correctly
  qemu-iotests: Test case for backing file deletion
  qemu-iotests: drop duplicated "create_image"
  qemu-iotests: Fix 051 reference output
  block: Avoid unecessary drv->bdrv_getlength() calls
  block: Disable BDRV_O_COPY_ON_READ for the backing file
  ahci: fix win7 hang on boot
  sheepdog: pass copy_policy in the request
  sheepdog: explicitly set copies as type uint8_t
  block: Don't copy backing file name on error
  ...

Message-id: 1383064269-27720-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 17:02:26 +01:00
Fam Zheng f4c129a38a vmdk: Implment bdrv_get_specific_info
Implement .bdrv_get_specific_info to return the extent information.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-31 14:44:43 +01:00
Fam Zheng cbe82d7fb3 qapi: Add optional field 'compressed' to ImageInfo
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-30 18:25:48 +01:00
Stefan Weil 59b0096213 misc: Spelling and grammar fixes in comments
* it's -> its
* grammar fix in ui/vnc-enc-zywrle.h

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-26 13:06:45 +04:00
Kevin Wolf d26c9a1573 blockdev: 'blockdev-add' QMP command
For examples see the changes to qmp-commands.hx.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:50:01 +02:00
Max Reitz 37764dfb71 qcow2: Add support for ImageInfoSpecific
Add a new ImageInfoSpecificQCow2 type as a subtype of ImageInfoSpecific.
This contains the compatibility level as a string and an optional
lazy_refcounts boolean (optional means mandatory for compat >= 1.1 and
not available for compat == 0.10).

Also, add qcow2_get_specific_info, which returns this information.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 14:03:57 +02:00
Max Reitz f2bb8a8a47 qapi: Add ImageInfoSpecific type
Add a new type ImageInfoSpecific as a union for image format specific
information in ImageInfo.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 10:52:54 +02:00
Fam Zheng 2cb5b22286 qapi: Introduce enum BlockJobType
This will replace the open coded block job type string for mirror,
commit and backup.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 10:52:54 +02:00
Wenchao Xia 44e3e053af qmp: add interface blockdev-snapshot-delete-internal-sync
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.

Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia f323bc9e8b qmp: add interface blockdev-snapshot-internal-sync
Snapshot ID can't be specified in this interface.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia bbe860104f qmp: add internal snapshot support in qmp_transaction
Unlike savevm, the qmp_transaction interface will not generate
snapshot name automatically, saving trouble to return information
of the new created snapshot.

Although qcow2 support storing multiple snapshots with same name
but different ID, here it will fail when an snapshot with that name
already exist before the operation. Format such as rbd do not support
ID at all, and in most case, it means trouble to user when he faces
multiple snapshots with same name, so ban that case. Request with
empty name will be rejected.

Snapshot ID can't be specified in this interface.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Paolo Bonzini facd6e2b5c docs, qapi: document qemu-img map
Eric Blake also requested including the output in qapi-schema.json,
so that it is published through the introspection mechanism.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Benoît Canet 2024c1df43 block: Add iops_size to do the iops accounting for a given io size.
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Benoît Canet 3e9fab690d block: Add support for throttling burst max in QMP and the command line.
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Markus Armbruster 3a1da42eb3 qapi: Rename ChardevBackend member "memory" to "ringbuf"
Commit 1da48c6 called the new member "memory" after commit 3949e59
standardized "ringbuf".  Rename for consistency.

However, member name "memory" is visible in QMP since 1.5.  It's
undocumented just like the driver name.  Keep it working anyway.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:12 -05:00
Markus Armbruster 4f57378fe6 Revert "chardev: Make the name of memory device consistent"
This reverts commit 6a85e60cb9.

Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory".  Commit 3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:

    Naming is a mess.  The code calls the device driver
    CirMemCharDriver, the public API calls it "memory", "memchardev",
    or "memchar", and the special commands are named like
    "memchar-FOO".  "memory" is a particularly unfortunate choice,
    because there's another character device driver called
    MemoryDriver.  Moreover, the device's distinctive property is that
    it's a ring buffer, not that's in memory.

This is what we released in 1.4.0.

Unfortunately, the rename missed a critical instance of "memory": the
actual driver name.  Thus, the new device could be used only by an
entirely undocumented name.  The documented name did not work.
Bummer.

Commit 6a85e60 fixes this by changing the documentation to match the
code.  It also changes some, but not all related occurences of
"ringbuf" to "memory".  Left alone are identifiers in C code, HMP and
QMP commands.  The latter are external interface, so they can't be
changed.

The result is an inconsistent mess.  Moreover, "memory" is a rotten
name.  The device's distinctive property is that it's a ring buffer,
not that's in memory.  User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.

Revert the commit.  Next commit will fix just the bug.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:11 -05:00
Juan Quintela 9781c3716a migration: add autoconvergence documentation
This hunk got lost during merge.  It is documentation.

Spotted-by: Peter Lieven <lieven-lists@dlhnet.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23 15:21:09 +02:00
Michael R. Hines ed4fbd1082 rdma: account for the time spent in MIG_STATE_SETUP through QMP
Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23 13:06:37 +02:00
Peter Lieven 323004a39d block-migration: efficiently encode zero blocks
this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.

additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19 12:29:21 +08:00
Anthony Liguori e9acb8cea9 pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
 pci fixes by dkoch, virtio-net enhancements by akong and mst,
 and a fix for xen pc by mst.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
 gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
 gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
 k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
 WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
 04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
 =P+pr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,net,pc enhancements

This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pc: don't access fw cfg if NULL
  virtio-net: add feature bit for any header s/g
  net: add support of mac-programming over macvtap in QEMU side
  pci: fix BRDIGE typo
  pci-bridge: update mappings for migration/restore

Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18 08:12:47 -05:00
Anthony Liguori 6453a3a694 Merge remote-tracking branch 'quintela/migration.next' into staging
# By Chegu Vinod
# Via Juan Quintela
* quintela/migration.next:
  Force auto-convegence of live migration
  Add 'auto-converge' migration capability
  Introduce async_run_on_cpu()

Message-id: 1373664508-5404-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15 14:49:16 -05:00
Amos Kong b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Stefan Hajnoczi b53169eae0 blockdev: add sync mode to drive-backup QMP command
The drive-backup command is similar to the drive-mirror command, except
no guest data written after the command executes gets copied.  Add a
sync mode argument which determines whether the entire disk is copied,
just allocated clusters, or only clusters being written to by the guest.

Currently only sync mode 'full' is supported - it copies the entire disk.
For read-only point-in-time snapshots we may only need sync mode 'none'
since the target can be a qcow2 file using the guest's disk as its
backing file (no need to copy the entire disk).  Finally, sync mode
'top' is useful if we wish to preserve the backing chain.

Note that this patch just adds the sync mode argument to drive-backup.
It does not implement sync modes 'top' or 'none'.  This patch is
necessary so we can add a drive-backup HMP command that behaves like the
existing drive-mirror HMP command and takes a sync mode.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-15 09:49:00 +02:00
Chegu Vinod bde1e2ec21 Add 'auto-converge' migration capability
The auto-converge migration capability allows the user to specify if they
choose live migration seqeunce to automatically detect and force convergence.

Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-12 20:34:58 +02:00
Kevin Wolf f53cae50f8 qapi-schema: Use existing type for drive-backup arguments
This removes duplicated definitions and documentation by reusing the
existing data type.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-10 13:39:38 -04:00
Kevin Wolf 852ad1a900 qapi-schema: Use BlockdevSnapshot type for blockdev-snapshot-sync
We don't have to duplicate the definition any more now that we may refer
to a type instead.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-10 13:39:38 -04:00
Gerd Hoffmann ef993ba7bc qemu-char: fix documentation for telnet+wait socket flags
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28 22:10:33 +04:00
Stefan Hajnoczi 78b18b78aa blockdev: add Abort transaction
The Abort action can be used to test QMP 'transaction' failure.  Add it
as the last action to exercise the .abort() and .cleanup() code paths
for all previous actions.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:27 +02:00
Stefan Hajnoczi 3037f36446 blockdev: add DriveBackup transaction
This patch adds a transactional version of the drive-backup QMP command.
It allows atomic snapshots of multiple drives along with automatic
cleanup if there is a failure to start one of the backup jobs.

Note that QMP events are emitted for block job completion/cancellation
and the block job will be listed by query-block-jobs.

@device: the name of the device whose writes should be mirrored.

@target: the target of the new image. If the file exists, or if it
         is a device, the existing file/device will be used as the new
         destination.  If it does not exist, a new file will be created.

@format: #optional the format of the new destination, default is to
         probe if @mode is 'existing', else the format of the source

@mode: #optional whether and how QEMU should create a new image, default is
       'absolute-paths'.

@speed: #optional the maximum speed, in bytes per second

@on-source-error: #optional the action to take on an error on the source,
                  default 'report'.  'stop' and 'enospc' can only be used
                  if the block device supports io-status (see BlockInfo).

@on-target-error: #optional the action to take on an error on the target,
                  default 'report' (no limitations, since this applies to
                  a different block device than @device).

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:27 +02:00
Stefan Hajnoczi 99a9addf56 block: add drive-backup QMP command
@drive-backup

Start a point-in-time copy of a block device to a new destination.  The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.

@device: the name of the device which should be copied.

@target: the target of the new image. If the file exists, or if it
         is a device, the existing file/device will be used as the new
         destination.  If it does not exist, a new file will be created.

@format: #optional the format of the new destination, default is to
         probe if @mode is 'existing', else the format of the source

@mode: #optional whether and how QEMU should create a new image, default is
       'absolute-paths'.

@speed: #optional the maximum speed, in bytes per second

@on-source-error: #optional the action to take on an error on the source,
                  default 'report'.  'stop' and 'enospc' can only be used
                  if the block device supports io-status (see BlockInfo).

@on-target-error: #optional the action to take on an error on the target,
                  default 'report' (no limitations, since this applies to
                  a different block device than @device).

Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.

Returns: nothing on success
         If @device is not a valid block device, DeviceNotFound

Since 1.6

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28 09:20:26 +02:00
Michael R. Hines 60d9222c8f rdma: introduce capability x-rdma-pin-all
This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.

For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:

1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps

These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.

Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27 02:38:36 +02:00
Michael R. Hines 7e114f8cf2 rdma: export throughput w/ MigrationStats QMP
This exposes throughput (in megabits/sec) through QMP.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27 02:38:36 +02:00
Amos Kong ad0f171e25 qapi: lack of two commas in dict
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-21 22:52:50 +04:00
Paolo Bonzini c02a9552a4 build: drop TARGET_TYPE
Just use the TARGET_NAME free string.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1370349928-20419-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14 15:33:12 +01:00
Wenchao Xia 553a7e8718 qmp: add ImageInfo in BlockDeviceInfo used by query-block
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07 13:37:45 +02:00
Kevin Wolf c8a83e8500 blockdev: Rename BlockdevAction -> TransactionAction
There's no reason to restrict transactions to operations related to
block devices, so rename the type now before schema introspection stops
us from doing so.

Also change the schema documentation of 'transaction' to not refer to
block devices or snapshots any more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24 16:17:55 +02:00
Lei Li 6a85e60cb9 chardev: Make the name of memory device consistent
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22 07:40:10 -05:00
Lei Li 08d0ab3fe6 chardev: Make consistent with udp device for new qapi backend
When register and open a chardev udp, the backend name should be udp
not dgram, and we do not have backend dgram in the chardev list. This
patch makes the new qapi udp backend consistent with the original
udp device.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20 08:20:07 -05:00
Eduardo Habkost 8e8aba5054 target-i386: Add "feature-words" property to X86CPU
This property will be useful for libvirt, as libvirt already has logic
based on low-level feature bits (not feature names), so it will be
really easy to convert the current libvirt logic to something using the
"feature-words" property.

The property will have two main use cases:
 - Checking host capabilities, by checking the features of the "host"
   CPU model
 - Checking which features are enabled on each CPU model

Example output:

  $ ./QMP/qmp --path=/tmp/m \
    qom-get --path=/machine/icc-bridge/icc/child[0] \
            --property=feature-words
  item[0].cpuid-register: EDX
  item[0].cpuid-input-eax: 2147483658
  item[0].features: 0
  item[1].cpuid-register: EAX
  item[1].cpuid-input-eax: 1073741825
  item[1].features: 0
  item[2].cpuid-register: EDX
  item[2].cpuid-input-eax: 3221225473
  item[2].features: 0
  item[3].cpuid-register: ECX
  item[3].cpuid-input-eax: 2147483649
  item[3].features: 101
  item[4].cpuid-register: EDX
  item[4].cpuid-input-eax: 2147483649
  item[4].features: 563346425
  item[5].cpuid-register: EBX
  item[5].cpuid-input-eax: 7
  item[5].features: 0
  item[5].cpuid-input-ecx: 0
  item[6].cpuid-register: ECX
  item[6].cpuid-input-eax: 1
  item[6].features: 2155880449
  item[7].cpuid-register: EDX
  item[7].cpuid-input-eax: 1
  item[7].features: 126614521

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06 19:16:05 +02:00
Igor Mammedov 69ca3ea5e1 QMP: Add cpu-add command
Adds "cpu-add id=xxx" QMP command.

cpu-add's "id" argument is a CPU number in a range [0..max-cpus)

Example QMP command:
 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 <- { "return": {} }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:06:07 +02:00
Hu Tao ede085b3fe add a new runstate: RUN_STATE_GUEST_PANICKED
The guest will be in this state when it is panicked.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 0255f263ffdc2a3716f73e89098b96fd79a235b3.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 10:30:00 -05:00
Amos Kong 1f8f987d34 monitor: introduce query-command-line-options
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.

Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-25 10:07:06 -04:00
Eric Blake c85a128480 qapi: use valid JSON in schema
* qapi-schema.json: JSON doesn't allow trailing commas.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-12 09:41:54 -04:00
Michal Novotny 315f9e1a8f Revert "New QMP command query-cpu-max and HMP command cpu_max"
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-12 09:41:54 -04:00
Michal Novotny c72e768836 New cpu-max field in query-machines QMP command output
Alter the query-machines QMP command to output information about
maximum number of CPUs for each machine type with default value
set to 1 in case the number of max_cpus is not set.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-12 09:41:53 -04:00
Laszlo Ersek 8ccbad5c7b qapi schema: add AcpiTableOptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-5-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04 19:23:08 -05:00
Jason Wang ec3960148f help: add docs for missing 'queues' option of tap
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361545072-30426-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-03 15:09:07 -05:00
Anthony Liguori 404e7a4f4a virtio,pci,qom
Work by Alex to support VGA assignment,
 pci and virtio fixes by Stefan, Jason and myself, and a
 new qmp event for hotplug support by myself.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRUfDAAAoJECgfDbjSjVRp5wwH/RiNzEuC0SNuMArXh2LS+qjn
 EavcSRTas5800Rl8bW2iYwJV38WhyW7jKs3JxbL5iK6XLeZvr7mureMRpsT6N5cR
 WPqoZBw2jIxcHmYZODHTGd9SrAmF2LpfKypN3a86P5P4sQvV/dEusPQx7ZNyi5I5
 kdhqNyP6Q6scAUbJVrNUbcOy8euLUtpEO2VQju/gikz2KLsQj6Hyxt9vKV2ZquYU
 B7pKvYt5UZhNPqhfBmRptW+U0CMYUPiZBZkZsTEPUibIFHQqGkMD/KtthFFDZc/U
 hjxttuETzjACR3KKgegwLVYCFEF8WadPJark4LWb4D9TA1MIdgo2NabNpqYxqrA=
 =PY9F
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

virtio,pci,qom

Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Alex Williamson (13) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (23 commits)
  pcie: Add endpoint capability initialization wrapper
  roms: switch oldnoconfig to olddefconfig
  pcie: Mangle types to match topology
  pci: Create and use API to determine root buses
  pci: Create pci_bus_is_express helper
  pci: Q35, Root Ports, and Switches create PCI Express buses
  pci: Allow PCI bus creation interfaces to specify the type of bus
  pci: Move PCI and PCIE type defines
  pci: Create and register a new PCI Express TypeInfo
  exec: assert that RAMBlock size is non-zero
  pci: refuse empty ROM files
  pci_bridge: Remove duplicate IRQ swizzle function
  pci_bridge: Use a default map_irq function
  pci: Fix INTx routing notifier recursion
  pci_bridge: drop formatting from source
  pci_bridge: factor out common code
  pci: Teach PCI Bridges about VGA routing
  pci: Add PCI VGA helpers
  virtio-pci: guest notifier mask without non-irqfd
  virtio-net: remove layout assumptions for mq ctrl
  ...
2013-03-26 16:16:43 -05:00
Anthony Liguori 18501ae6e8 Merge remote-tracking branch 'quintela/migration.next' into staging
# By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
  Use qemu_put_buffer_async for guest memory pages
  Add qemu_put_buffer_async
  Use writev ops if available
  Store the data to send also in iovec
  Update bytes_xfer in qemu_put_byte
  Add socket_writev_buffer function
  Add QemuFileWritevBuffer QemuFileOps
  migration: use XBZRLE only after bulk stage
  migration: do not search dirty pages in bulk stage
  migration: do not sent zero pages in bulk stage
  migration: add an indicator for bulk state of ram migration
  migration: search for zero instead of dup pages
  bitops: unroll while loop in find_next_bit()
  buffer_is_zero: use vector optimizations if possible
  cutils: add a function to find non-zero content in a buffer
  move vector definitions to qemu-common.h
  savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
  savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
  savevm: Add VMSTATE_FLOAT64 helpers
  savevm: Add VMSTATE_UINTTL_EQUAL helper
  ...
2013-03-26 13:38:00 -05:00
Peter Lieven f1c72795af migration: do not sent zero pages in bulk stage
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.

even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.

this patch also updates QMP to return the number of
skipped pages in MigrationStats.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26 13:32:33 +01:00
Michal Novotny 4d700430a2 New QMP command query-cpu-max and HMP command cpu_max
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25 16:21:33 -04:00
Corey Bryant 88ca7bcff1 QMP: Remove duplicate TPM type from query-tpm
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25 16:21:33 -04:00
Anthony Green d15a9c2390 Add top level changes for moxie
Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-23 14:25:42 +00:00
Michael S. Tsirkin 0402a5d65e qdev: DEVICE_DELETED event
libvirt has a long-standing bug: when removing the device,
it can request removal but does not know when the
removal completes. Add an event so we can fix this in a robust way.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-17 13:27:27 +02:00
Gerd Hoffmann 3ecc059dcd chardev: add udp support to qapi
This patch adds 'udp' support to qapi.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann 1da48c658a chardev: add memory (ringbuf) support to qapi
This patch adds 'memory' support to qapi and also switches over
the memory chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann 702ec69cc1 chardev: add vc support to qapi
This patch adds 'vc' support to qapi and also switches over the
vc chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann cd153e2aa2 chardev: add spice support to qapi
This patch adds 'spicevmc' and 'spiceport' support to qapi and also
switches over the spice chardev initialization to the new qapi code
path.
2013-03-13 10:27:46 +01:00
Gerd Hoffmann 548cbb36f4 chardev: add pipe support to qapi
This patch adds 'pipe' support to qapi and also switches over the
pipe chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann d9ac374f0d chardev: add console support to qapi
This patch adds 'console' support to qapi and also switches over the
console chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann 7c358031ea chardev: add stdio support to qapi
This patch adds 'stdio' support to qapi and also switches over the
stdio chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann 2d57286da6 chardev: add braille support to qapi
This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann f5a51cab2a chardev: add msmouse support to qapi
This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi code path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13 10:27:46 +01:00
Gerd Hoffmann edb2fb3cc8 chardev: add mux chardev support to qapi
This adds mux chardev support to the qapi and also makes the qapi-based
chardev creation path handle the "mux=on" option correctly.
2013-03-13 10:27:45 +01:00
Stefan Berger d1a0cf738d Support for TPM command line options
This patch adds support for TPM command line options.
The command line options supported here are

./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
           -device tpm-tis,tpmdev=<id>,id=<other id>

and

./qemu-... -tpmdev help

where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').

Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.

Monitor support for 'info tpm' has been added. It for example prints the
following:

(qemu) info tpm
TPM devices:
 tpm0: model=tpm-tis
  \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:11 -05:00
Stefan Hajnoczi e6439d783c qemu-img: add compressed clusters to BlockFragInfo
Show how many clusters are compressed.  This can be used to monitor how
many compressed clusters remain and whether to recompress the image.

Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22 21:21:09 +01:00
Federico Simoncelli 8599ea4c42 qemu-img: add json output option to the check command
This option --output=[human|json] makes qemu-img check output a human
or JSON representation at the choice of the user.

Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22 21:21:08 +01:00
Jason Wang 2ca81baa0b help: add docs for multiqueue tap options
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:33:48 -06:00
Markus Armbruster d36b2b904e qapi: Flatten away ChardevPort
Simplifies the schema and the code.

QMP command

    { "execute" : "chardev-add",
      "arguments" : { "id" : "ser0",
                      "backend" : { "type" : "port",
                                    "data" : { "type": "serial",
                                               "device":"/dev/ttyS0"} } } }

becomes

    { "execute" : "chardev-add",
      "arguments" : { "id" : "ser0",
                      "backend" : { "type" : "serial",
                                    "data" : { "device":"/dev/ttyS0"} } } }

Bonus: nicer error messages.  "unknown chardev port (1)" becomes
"character device backend type 'parallel' not supported".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1360767256-610-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-13 11:57:32 -06:00
Markus Armbruster 58fa432522 qapi: Improve chardev-add documentation
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360602348-4727-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-11 13:22:52 -06:00
Markus Armbruster 3949e59414 qemu-char: Saner naming of memchar stuff & doc fixes
New device, has never been released, so we can still improve things
without worrying about compatibility.

Naming is a mess.  The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO".  "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver.  Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory.  Therefore:

* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
  "ringbuf" in the API.

* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.

* Rename device parameter from maxcapacity to size (simple words are
  good for you).

* Clearly mark the parameter as optional in documentation.

* Fix error reporting so that chardev-add reports to current monitor,
  not stderr.

* Replace cirmem in C identifiers by ringbuf.

* Rework documentation.  Document the impact of our crappy UTF-8
  handling on reading.

* QMP examples that even work.

I could split this up into multiple commits, but they'd change the
same documentation lines multiple times.  Not worth it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:19 -06:00
Markus Armbruster 1a69278e53 qmp: Use generic errors in memchar-read, memchar-write
New errors should be generic unless there's a real use case for rich
errors.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:17 -06:00
Markus Armbruster 3ab651fc81 qmp: Clean up design of memchar-read
The data returned has a well-defined size, which makes the size
returned along with it redundant at best.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:17 -06:00