This naming was used in kvm tree, and is easier to remember
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vmsd alone is not enugh, because we can have several structs saved with the same description (vmsd).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ticks_per_sec is a constant. There's no need to store it as a variable as it
never changes since our time is based on units.
Convert get_ticks_per_sec() to a static inline and move the constant into
qemu-timer.h. Remove all references to QEMU_TIMER_BASE so that we consistently
use this interface.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
loadvm_state is called from: vl.c during startup, vmstart() is called after finishing loading. The other caller do_loadvm() does the call after a vm_stop(). At both places where we can be saving state we are stoped a few lines before
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In previosu series I remove v2 support for RAM (that was the version that was
supported when SaveVM v3 appeared). Now we can't load RAM for any image saved in SaveVM v2, we can as well remove SaveVM v2 entirely.
Note: That SaveVM RAM was at v2 when General SaveVM support went from v2 to v3 makes talking about versions confusing at least
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It don't work. It fails in this check
if (qemu_get_be32(f) != last_ram_offset)
With 512MB of ram, values were for me:
v = 20c00000 last_ram_offset = 20840000
Last time that some code changed that was this one.
commit 94a6b54fd6
Implement dynamic guest ram allocation.
(I.e. it has been broken since at least April)
Going back to the previous commit, ram load correctly, but vga screen gets
corrupted and ide don't load correctly. At this point I decide that removing
support is the only viable thing.
The last user of the ram_compress_* were RAM_SAVE_FLAG_FULL flag, but
that flag was never ever been stored in an image. Mark the flag obsolete
and remove the functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that monitor stopped using focus we can make it internal
to the mux driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make the mux driver send mux_in and mux_out events when switching
focus while hooking up more handlers.
stop using CharDriverState->focus in monitor.c, track state using
the mux events instead. This also removes the implicit assumtion
that a muxed monitor allways has mux channel 0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Lets put -chardev into use now. With this patch applied chardev:name is
accepted as chardev specification everywhere, i.e. now you can:
-chardev stdio,id=ttyS0
-serial chardev:ttyS0
which does the same as '-serial stdio".
Muxing can be done this way:
-chardev stdio,id=mux,mux=on
-serial chardev:mux
-monitor chardev:mux
You can mux more than two streams.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While being at it: create a new inet_dgram_opts() function for udp setup,
so udp can handle IPv6 now.
new cmd line syntax:
-chardev udp,id=name,host=remotehost,port=remoteport,\
localaddr=bindaddr,localport=bindport
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
new cmd line syntax: you can add mux=1 to any chardev to enable muxing,
then attach it multiple times, like this:
-chardev pty,name=mux,mux=on
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
new cmd line syntax:
unix socket:
-chardev socket,id=name,path=/path/to/socket
tcp socket:
-chardev socket,id=name,host=hostaddr|ipaddr,port=portnr
server and nowait options work as usual. Alternatively you can use
server=[on|off] + wait=[on|off] syntax.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add inet_listen_opts(). Does the same as inet_listen(), but uses
QemuOpts. inet_listen() is a compatibility wrapper for
inet_listen_opts() now and should go away some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add inet_connect_opts(). Does the same as inet_connect(), but uses
QemuOpts. inet_connect() is a compatibility wrapper for
inet_connect_opts() now and should go away some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add unix_listen_opts(). Does the same as unix_listen(), but uses
QemuOpts. unix_listen() is a compatibility wrapper for
unix_listen_opts() now and should go away some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add unix_connect_opts(). Does the same as unix_connect(), but uses
QemuOpts. unix_connect() is a compatibility wrapper for
unix_connect_opts() now and should go away some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
start switching chardevs to QemuOpts. This patch adds the
infrastructure and converts the null device.
The patch brings two new functions:
qemu_chr_open_opts()
same as qemu_chr_open(), but uses QemuOpts instead of a
option char string.
qemu_chr_parse_compat()
accepts a traditional chardev option string, returns the
corresponding QemuOpts instance, to handle backward
compatibility.
The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:
-chardev null,id=test
This uses the new qemu_chr_open_opts. Thus with this patch alone only
the null device works. The other devices will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-option.h has no protection against including it twice.
This patch adds the usual "#ifndef header" bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
looking for id= and creating a new QemuOpts instance is splitted from
the actual option parser code now, so the parser can be called from
other contexts too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use DO_UPCAST() instead of container_of() to go from PCIDevice to
I6300State. This ensures that PCIDevice is the first member of struct
I6300State.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hello,
In some cases bus driver can deassert "bus master" bit in PCI command
register. The driver will no longer be able to update related registers in
the device. Eventually it will cause QEMU to exit in "virtqueue_num_heads"
function.
Attached path that fixes the described issue.
Best regards,
Yan Vugenfirer.
>From 3fdafbdfad676ec8479dc073cff70bf356868bfe Mon Sep 17 00:00:00 2001
From: Yan Vugenfirer <yvugenfi@redhat.com>
Date: Tue, 8 Sep 2009 10:08:14 -0400
Subject: [PATCH] VirtIO: Fix QEMU crash during Windows PNP tests
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new VIRTIO_BLK_F_WCACHE feature to virtio-blk to indicate that we have
a volatile write cache that needs controlled flushing. Implement a
VIRTIO_BLK_T_FLUSH operation to flush it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead stalling the VCPU while serving a cache flush try to do it
asynchronously. Use our good old helper thread pool to issue an
asynchronous fdatasync for raw-posix. Note that while Linux AIO
implements a fdatasync operation it is not useful for us because
it isn't actually implement in asynchronous fashion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we are flushing the caches for our image files we only care about the
data (including the metadata required for accessing it) but not things
like timestamp updates. So try to use fdatasync instead of fsync to
implement the flush operations.
Unfortunately many operating systems still do not support fdatasync,
so we add a qemu_fdatasync wrapper that uses fdatasync if available
as per the _POSIX_SYNCHRONIZED_IO feature macro or fsync otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a enable_write_cache flag in the block driver state, and use it to
decide if we claim to have a volatile write cache that needs controlled
flushing from the guest. The flag is off if cache=writethrough is
defined because O_DSYNC guarantees that every write goes to stable
storage, and it is on for cache=none and cache=writeback.
Both scsi-disk and ide now use the new flage, changing from their
defaults of always off (ide) or always on (scsi-disk).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
initialize vectors for all vqs to VIRTIO_NO_VECTOR rather than 0 which
is a valid vector. This fixes migration which happened before driver
was loaded.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit bf011293fa made virtio-blk-pci not
PCI-compliant, since it makes region 0 (which is an i/o region)
size > 256, and, since PCI 2.1, i/o regions are limited to 256 bytes size.
When the ATA serial number feature is off, which is the default,
make the device spec compliant again, by making region 0 smaller.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Tested-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In usb-linux.c:usb_host_handle_control, we pass a 1024-byte buffer and
length to the kernel. However, the length was provided by the caller
of dev->handle_packet, and is not checked, so the kernel might provide
too much data and overflow our buffer.
For example, hw/usb-uhci.c could set the length to 2047.
hw/usb-ohci.c looks like it might go up to 4096 or 8192.
This causes a qemu crash, as reported here:
http://www.mail-archive.com/kvm@vger.kernel.org/msg18447.html
This patch increases the usb-linux.c buffer size to 2048 to fix the
specific device reported, and adds a check to avoid the overflow in
any case.
Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Compilation for MIPS host (not part of official QEMU)
checks __mips_isa_rev which is not always defined.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite common for virtio-blk to submit more than one write request in a
row to the qemu block layer. Use bdrv_aio_multiwrite to allow block drivers to
optimize its handling of the requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
One performance problem of qcow2 during the initial image growth are
sequential writes that are not cluster aligned. In this case, when a first
requests requires to allocate a new cluster but writes only to the first
couple of sectors in that cluster, the rest of the cluster is zeroed - just
to be overwritten by the following second request that fills up the cluster.
Let's try to merge sequential write requests to the same cluster, so we can
avoid to write the zero padding to the disk in the first place.
As a nice side effect, also other formats take advantage of dealing with less
and larger requests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela