Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-6-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pages that we want to track for NOTDIRTY are RAM. We do not
really need to go through the I/O path to handle them.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_tb_read tracepoint is unreachable, since notdirty
is supposed to apply only to writes. The memory_region_tb_write
tracepoint is mis-named, because notdirty is not only used for TB
invalidation. It is also used for e.g. VGA RAM updates and migration.
Replace memory_region_tb_write with memory_notdirty_write_access,
and place it in memory_notdirty_write_prepare where it can catch
all of the instances. Add memory_notdirty_set_dirty to log when
we no longer intercept writes to a page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
devend_memop can rely on the fact that the result is always either
0 or MO_BSWAP, corresponding respectively to host endianness and
the opposite. Native (target) endianness in turn can be either
the host endianness, in which case MO_BSWAP is only returned for
host-opposite endianness, or the opposite, in which case 0 is only
returned for host endianness.
With this in mind, devend_memop can be compiled as a setcond+shift
for every target. Do this and, while at it, move it to
include/exec/memory.h since !NEED_CPU_H files do not (and should not)
need it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that MemOp has been pushed down into the memory API, and
callers are encoding endianness, we can collapse byte swaps
along the I/O path into the accelerator and target independent
adjust_endianness.
Collapsing byte swaps along the I/O path enables additional endian
inversion logic, e.g. SPARC64 Invert Endian TTE bit, with redundant
byte swaps cancelling out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <911ff31af11922a9afba9b7ce128af8b8b80f316.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert memory_region_dispatch_{read|write} operand "unsigned size"
into a "MemOp op".
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1dd82df5801866743f838f1d046475115a1d32da.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
memory_region_iommu_replay_all is not used. Remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20190822172350.12008-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old memory_region_{add|clear}_coalescing() has some defects
because they both changed mr->coalesced before updating the regions
using memory_region_update_coalesced_range_as(). Then when the
regions were updated in memory_region_update_coalesced_range_as() the
mr->coalesced will always be either one more or one less. So:
- For memory_region_add_coalescing: it'll always trying to remove the
newly added coalesced region while it shouldn't, and,
- For memory_region_clear_coalescing: when it calls the update there
will be no coalesced ranges on mr->coalesced because they were all
removed before hand so the update will probably do nothing for real.
Let's fix this. Now we've got flat_range_coalesced_io_notify() to
notify a single CoalescedMemoryRange instance change, so use it in the
existing memory_region_update_coalesced_range() logic by only notify
either an addition or deletion. Then we hammer both the
memory_region_{add|clear}_coalescing() to use it.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The has_coalesced_range could potentially be problematic in that it
only works for additions of coalesced mmio ranges but not deletions.
The reason is that has_coalesced_range information can be lost when
the FlatView updates the topology again when the updated region is not
covering the coalesced regions. When that happens, due to
flatrange_equal() is not checking against has_coalesced_range, the new
FlatRange will be seen as the same one as the old and the new
instance (whose has_coalesced_range will be zero) will replace the old
instance (whose has_coalesced_range _could_ be non-zero).
The counter was originally used to make sure every FlatRange will only
notify once for coalesced_io_{add|del} memory listeners, because each
FlatRange can be used by multiple address spaces, so logically
speaking it could be called multiple times. However we should not
limit that, because memory listeners should will only be registered
with specific address space rather than multiple address spaces.
So let's fix this up by simply removing the whole has_coalesced_range.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a workaround of current KVM's KVM_UNREGISTER_COALESCED_MMIO
interface. The kernel interface only allows to unregister an mmio
device with exactly the zone size when registered, or any smaller zone
that is included in the device mmio zone. It does not support the
userspace to specify a very large zone to remove all the small mmio
devices within the zone covered.
Logically speaking it would be nicer to fix this from KVM side, though
in all cases we still need to coop with old kernels so let's do this.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Removing the update variable and quit earlier if the memory region has
no coalesced range. This prepares for the next patch.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a race between TCG and accesses to the dirty log:
vCPU thread reader thread
----------------------- -----------------------
TLB check -> slow path
notdirty_mem_write
write to RAM
set dirty flag
clear dirty flag
TLB check -> fast path
read memory
write to RAM
Fortunately, in order to fix it, no change is required to the
vCPU thread. However, the reader thread must delay the read after
the vCPU thread has finished the write. This can be approximated
conservatively by run_on_cpu, which waits for the end of the current
translation block.
A similar technique is used by KVM, which has to do a synchronous TLB
flush after doing a test-and-clear of the dirty-page flags.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is wrong for an entry to have parts out of scope of notifier's range.
assert this condition.
Out of scope mapping/unmapping would cause problem, as in below case:
1. initially there are two notifiers with ranges
0-0xfedfffff, 0xfef00000-0xffffffffffffffff,
IOVAs from 0x3c000000 - 0x3c1fffff is in shadow page table.
2. in vfio, memory_region_register_iommu_notifier() is followed by
memory_region_iommu_replay(), which will first call address space
unmap,
and walk and add back all entries in vtd shadow page table. e.g.
(1) for notifier 0-0xfedfffff,
IOVAs from 0 - 0xffffffff get unmapped,
and IOVAs from 0x3c000000 - 0x3c1fffff get mapped
(2) for notifier 0xfef00000-0xffffffffffffffff
IOVAs from 0 - 0x7fffffffff get unmapped,
but IOVAs from 0x3c000000 - 0x3c1fffff cannot get mapped back.
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <1561432878-13754-1-git-send-email-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
TYPE_IOMMU_MEMORY_REGION is a direct subtype of TYPE_MEMORY_REGION.
Its instance struct is IOMMUMemoryRegion, and its first member is a
MemoryRegion. Correct. Its class struct is IOMMUMemoryRegionClass,
and its first member is a DeviceClass. Wrong. Messed up when commit
1221a47467 introduced the QOM type. It even included hw/qdev-core.h
just for that.
TYPE_MEMORY_REGION doesn't bother to define a class struct. This is
fine, it simply defaults to its super-type TYPE_OBJECT's class struct
ObjectClass. Changing IOMMUMemoryRegionClass's first member's type to
ObjectClass would be a minimal fix, if a bit brittle: if
TYPE_MEMORY_REGION ever acquired own class struct, we'd have to update
IOMMUMemoryRegionClass to use it.
Fix it the clean and robust way instead: give TYPE_MEMORY_REGION its
own class struct MemoryRegionClass now, and use it for
IOMMUMemoryRegionClass's first member.
Revert the include of hw/qdev-core.h, and fix the few files that have
come to rely on it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190812052359.30071-5-armbru@redhat.com>
This adds an accelerator name to the "into mtree -f" to tell the user if
a particular memory section is registered with the accelerator;
the primary user for this is KVM and such information is useful
for debugging purposes.
This adds a has_memory() callback to the accelerator class allowing any
accelerator to have a label in that memory tree dump.
Since memory sections are passed to memory listeners and get registered
in accelerators (rather than memory regions), this only prints new labels
for flatviews attached to the system address space.
An example:
Root memory region: system
0000000000000000-0000002fffffffff (prio 0, ram): /objects/mem0 kvm
0000003000000000-0000005fffffffff (prio 0, ram): /objects/mem1 kvm
0000200000000020-000020000000003f (prio 1, i/o): virtio-pci
0000200080000000-000020008000003f (prio 0, i/o): capabilities
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190614015237.82463-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new memory region listener hook log_clear() to allow the
listeners to hook onto the points where the dirty bitmap is cleared by
the bitmap users.
Previously log_sync() contains two operations:
- dirty bitmap collection, and,
- dirty bitmap clear on remote site.
Let's take KVM as example - log_sync() for KVM will first copy the
kernel dirty bitmap to userspace, and at the same time we'll clear the
dirty bitmap there along with re-protecting all the guest pages again.
We add this new log_clear() interface only to split the old log_sync()
into two separated procedures:
- use log_sync() to collect the collection only, and,
- use log_clear() to clear the remote dirty bitmap.
With the new interface, the memory listener users will still be able
to decide how to implement the log synchronization procedure, e.g.,
they can still only provide log_sync() method only and put all the two
procedures within log_sync() (that's how the old KVM works before
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is introduced). However with this
new interface the memory listener users will start to have a chance to
postpone the log clear operation explicitly if the module supports.
That can really benefit users like KVM at least for host kernels that
support KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2.
There are three places that can clear dirty bits in any one of the
dirty bitmap in the ram_list.dirty_memory[3] array:
cpu_physical_memory_snapshot_and_clear_dirty
cpu_physical_memory_test_and_clear_dirty
cpu_physical_memory_sync_dirty_bitmap
Currently we hook directly into each of the functions to notify about
the log_clear().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Also we change the 2nd parameter of it to be the relative offset
within the memory region. This is to be used in follow up patches.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Similar to 9460dee4b2 ("memory: do not touch code dirty bitmap unless
TCG is enabled", 2015-06-05) but for the migration bitmap - we can
skip the MIGRATION bitmap update if migration not enabled.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190603065056.25211-4-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The memory region reference is increased when insert a range
into flatview range array, then decreased by destroy flatview.
If some flat range merged by flatview_simplify, the memory region
reference can not be decreased by destroy flatview any more.
In this case, start virtual machine by the command line:
qemu-system-x86_64
-name guest=ubuntu,debug-threads=on
-machine pc,accel=kvm,usb=off,dump-guest-core=off
-cpu host
-m 16384
-realtime mlock=off
-smp 8,sockets=2,cores=4,threads=1
-object memory-backend-file,id=ram-node0,prealloc=yes,mem-path=/dev/hugepages,share=yes,size=8589934592
-numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object memory-backend-file,id=ram-node1,prealloc=yes,mem-path=/dev/hugepages,share=yes,size=8589934592
-numa node,nodeid=1,cpus=4-7,memdev=ram-node1
-no-user-config
-nodefaults
-rtc base=utc
-no-shutdown
-boot strict=on
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x2
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3
-drive file=ubuntu.qcow2,format=qcow2,if=none,id=drive-virtio-disk0,cache=none,aio=native
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
-chardev pty,id=charserial0
-device isa-serial,chardev=charserial0,id=serial0
-device usb-tablet,id=input0,bus=usb.0,port=1
-vnc 0.0.0.0:0
-device VGA,id=video0,vgamem_mb=16,bus=pci.0,addr=0x5
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
-msg timestamp=on
And run the script in guest OS:
while true
do
setpci -s 00:06.0 04.b=03
setpci -s 00:06.0 04.b=07
done
I found the reference of node0 HostMemoryBackendFile is a big one.
(gdb) p numa_info[0]->node_memdev->parent.ref
$6 = 1636278
(gdb)
Signed-off-by: King Wang<king.wang@huawei.com>
Message-Id: <20190712065241.11784-1-king.wang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hot-unplugging a PHB with a VFIO device connected to it crashes QEMU:
-device spapr-pci-host-bridge,index=1,id=phb1 \
-device vfio-pci,host=0034:01:00.3,id=vfio0
(qemu) device_del phb1
[ 357.207183] iommu: Removing device 0001:00:00.0 from group 1
[ 360.375523] rpadlpar_io: slot PHB 1 removed
qemu-system-ppc64: memory.c:2742:
do_address_space_destroy: Assertion `QTAILQ_EMPTY(&as->listeners)' failed.
'as' is the IOMMU address space, which indeed has a listener registered
to by vfio_connect_container() when the VFIO device is realized. This
listener is supposed to be unregistered by vfio_disconnect_container()
when the VFIO device is finalized. Unfortunately, the VFIO device hasn't
reached finalize yet at the time the PHB unrealize function is called,
and address_space_destroy() gets called with the VFIO listener still
being registered.
All regions have just been unmapped from the address space. Listeners
aren't needed anymore at this point. Remove them before destroying the
address space.
The VFIO code will try to remove them _again_ at device finalize,
but it is okay since memory_listener_unregister() is idempotent.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156110925375.92514.11649846071216864570.stgit@bahia.lan>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Correct spelling error pointed out by aik]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
It's never used anywhere.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190520030839.6795-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty bit is DIRTY_MEMORY_MIGRATION. Correct the comment.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190426020927.25470-1-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mtree_info() takes an fprintf()-like callback and a FILE * to pass to
it, and so do its helper functions. Passing around callback and
argument is rather tiresome.
Its only caller hmp_info_mtree() passes monitor_printf() cast to
fprintf_function and the current monitor cast to FILE *.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-9-armbru@redhat.com>
Currently, a callback registered through the RAMBlock notifier
is not able to get the memory region type (i.e callback is not
able to use memory_region_is_ram_device function). This is
because mr->ram assignment happens _after_ the memory is allocated
whereas the callback is executed during allocation.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1667249
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20190204222322.26766-2-brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not add/del coalesced IO ranges in the case where the
same FlatRanges are present in both old and new FlatViews
Fixes: 3ac7d43a6f ("memory: update coalesced_range on transaction_commit")
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Message-Id: <59572a7353830be4b7aa57d79ccb7ad6b72f0dda.1549406119.git.jag.raman@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The e1000 driver calls memory_region_add_coalescing but
kvm_coalesce_mmio_region is never called for those regions. The bug
dates back to the introduction of the memory region API; to fix it,
delete and re-add coalesced MMIO ranges when building the FlatViews.
Because coalesced MMIO regions apply to all address spaces, the
has_coalesced_range flag has to be changed into an int.
Fixes: 093bc2cd88 ("Hierarchical memory region API")
Reported-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store whether the FlatRange has had any coalesced I/O ranges applied,
and if not avoid calling coalesced_io_del. This is useful in preparation
for the next patch, which will call coalesced_io_del when rendering
memory regions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract two new functions from memory_region_update_coalesced_range_as.
To avoid duplication in the creation of the MemoryRegionSection, use
MEMORY_LISTENER_UPDATE_REGION instead of MEMORY_LISTENER_CALL
to invoke the listener callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.
This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.
Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Memory regions configured as DEVICE_BIG_ENDIAN (or DEVICE_NATIVE_ENDIAN on
big-endian guest) behave incorrectly when the memory access 'size' is smaller
than the implementation 'access_size'.
In the following code segment from access_with_adjusted_size():
if (memory_region_big_endian(mr)) {
for (i = 0; i < size; i += access_size) {
r |= access_fn(mr, addr + i, value, access_size,
(size - access_size - i) * 8, access_mask, attrs);
}
(size - access_size - i) * 8 is the number of bits that will arithmetic
shift the current value.
Currently we can only 'left' shift a read() access, and 'right' shift a write().
When the access 'size' is smaller than the implementation, we get a negative
number of bits to shift.
For the read() case, a negative 'left' shift is a 'right' shift :)
However since the 'shift' type is unsigned, there is currently no way to
right shift.
Fix this by changing the access_fn() prototype to handle signed shift values,
and modify the memory_region_shift_read|write_access() helpers to correctly
arithmetic shift the opposite direction when the 'shift' value is negative.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180927002416.1781-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180927002416.1781-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180927002416.1781-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this change, memory-backend-file object is valid for Linux hosts
only because hostmem-file.c is compiled only on Linux hosts.
However, other POSIX-based hosts (such as macOS) can support
memory-backend-file object in the same way as on Linux hosts.
This patch makes hostmem-file.c and related functions to be compiled on
all POSIX-based hosts to make available memory-backend-file on them.
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if MemoryRegion intialization fails it's left in semi-initialized state,
where it's size is not 0 and attached as child to owner object.
And this leds to crash in following use-case:
(monitor) object_add memory-backend-file,id=mem1,size=99999G,mem-path=/tmp/foo,discard-data=yes
memory.c:2083: memory_region_get_ram_ptr: Assertion `mr->ram_block' failed
Aborted (core dumped)
it happens due to assumption that memory region is intialized when
memory_region_size() != 0
and therefore it's ok to access it in
file_backend_unparent()
if (memory_region_size() != 0)
memory_region_get_ram_ptr()
which happens when object_add fails and unparents failed backend making
file_backend_unparent() access invalid memory region.
Fix it by making sure that memory_region_init_foo() APIs cleanup externally
visible side effects on failure (like set size to 0 and unparenting object)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1536064777-42312-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the obsolete MMIO request_ptr APIs; they have no
users now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
The io_readx() function needs to know whether the load it is
doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it
can pass the right value to the cpu_transaction_failed()
function. Plumb this information through from the softmmu
code.
This is currently not often going to give the wrong answer,
because usually instruction fetches go via get_page_addr_code().
However once we switch over to handling execution from non-RAM by
creating single-insn TBs, the path for an insn fetch to generate
a bus error will be through cpu_ld*_code() and io_readx(),
so without this change we will generate a d-side fault when we
should generate an i-side fault.
We also have to pass the access type via a CPU struct global
down to unassigned_mem_read(), for the benefit of the targets
which still use the cpu_unassigned_access() hook (m68k, mips,
sparc, xtensa).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
As more flag parameters besides the existing 'share' are going to be
added to following functions
memory_region_init_ram_from_file
qemu_ram_alloc_from_fd
qemu_ram_alloc_from_file
let's switch them to use the 'flags' parameters so as to ease future
flag additions.
The existing 'share' flag is converted to the RAM_SHARED bit in ram_flags,
and other flag bits are ignored by above functions right now.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Dr. David Alan Gilbert