This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.
pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.
Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make pci_bar() aware of header type 1. When PCI_ROM_SLOT
it should return PCI_ROM_ADDRESS1 (!= PCI_ROM_ADDRESS)
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch cleans up pci_default_read_config() removing
ugly length and range check.
Suggested by "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
use pci_set_word() for pci command register.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- use symbolic constant
- use helper function pci_set_xxx()
- removed lines which initializes to 0.
It is unnecessary because it is already zeroed.
- add some comments on command registers.
Some initial values are suspicious because they seems to
be specific to apb_pci.c which is the only user of pci bridge right now.
For now don't touch those values to avoid breakage.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
use pci_[gs]et_{byte, word, long}() to access pci configuration
space.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
add helper functions to get/set PCIDevice::config
Those will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
define a constant to represent a unmapped bar instead of -1 and use it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
use PCI_SLOT() and PCI_FUNC() where appropriate instead of
direct use of bit operation.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
introduce constant PCI_NUM_PINS for the number of interrupt pins, 4.
and use it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
add missing ## in PCI_DPRINTF() to compile.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is needed also for qemu-io, but not for qemu-nbd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since config-host.h is generated by the Makefile (1215c6e76),
building (only) qemu-img fails:
[user@f12-uri qemu]$ make distclean (or git clone qemu)
[user@f12-uri qemu]$ ./configure ...
[user@f12-uri qemu]$ make qemu-img
GEN config-all-devices.mak
GEN qemu-img-cmds.h
CC qemu-img.o
In file included from qemu-img.c:24:
qemu-common.h:32:25: error: config-host.h: No such file or directory
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is a followup to 8eca6b1bc7,
fixing crashes when guests with 2.6.25 virtio drivers have saturated
virtio network connections.
https://bugs.edge.launchpad.net/ubuntu/+source/qemu-kvm/+bug/458521
That patch should have been whitelisting *_HOST_* rather than the the
*_GUEST_* features.
I tested this by running an Ubuntu 8.04 Hardy guest (2.6.24 kernel +
2.6.25-virtio driver). I saturated both the incoming, and outgoing
network connection with nc, seeing sustained 6MB/s up and 6MB/s down
bitrates for ~20 minutes. Previously, this crashed immediately. Now,
the guest does not crash and maintains network connectivity throughout
the test.
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A size of 0 should be valid and cannot be treated as "missing value". Use -1
for this purpose instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Okay, let's try re-enabling the drain-entire-queue behaviour, with a
difference - before each subsequent packet, use qemu_can_send_packet()
to check that we can send it. This is similar to how we check before
polling the tap fd and avoids having to drop a packet if the receiver
cannot handle it.
This patch should be a performance improvement since we no longer have
to go through the mainloop for each packet.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We should only return zero from receive() for a condition which we'll
get notification of when it changes. Currently, we're returning zero
if the guest driver is not ready, but we won't ever flush our queue
when that status changes.
Also, don't check buffer space in can_receive(), but instead just allow
receive() to return zero when this condition occurs and have the caller
handle queueing the packet.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we disable any receiver whose queue is full, we do not require
senders to handle a zero return by supplying a sent callback.
This is a second step towards allowing can_receive() handlers to return
true even if no buffer space is available.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a receiver returns zero, that means its queue is full and it will
notify us when room is available using qemu_flush_queued_packets().
Take note of that and disable that receiver until it flushes its queue.
This is a first step towards allowing can_receive() handlers to return
true even if no buffer space is available.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If qemu_send_packet_async() returns zero, it means the packet has been
queued and the sent callback will be invoked once it has been flushed.
This is only possible where the NIC's receive() handler returns zero
and promises to notify the networking core that room is available in its
queue again.
In the case where the receive handler does not have this capability
(and its queue fills up) it returns -1 and the networking core does not
queue up the packet. This condition is indicated by a -1 return from
qemu_send_packet_async().
Currently, tap handles this condition simply by dropping the packet. It
should do its best to avoid getting into this situation by checking such
NIC's have room for a packet before copying the packet from the tap
interface.
tap_send() used to achieve this by only reading a single packet before
returning to the mainloop. That way, tap_can_send() is called before
reading each packet.
tap_send() was changed to completely drain the tap interface queue
without taking into account the situation where the NIC returns an
error and the packet is not queued. Let's start fixing this by
reverting to the previous behaviour of reading one packet at a time.
Reported-by: Scott Tsai <scottt.tw@gmail.com>
Tested-by: Sven Rudolph <Sven_Rudolph@drewag.de>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have code for a quite a few block formats. While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.
This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats. Other programs, like qemu-img, are
not affected.
Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same. Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These devices are created automatically, and attempting to create
another one with -device fails with "qemu: hardware error:
register_ioport_write: invalid opaque".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a slightly revised patch for adding readonly flag to the -drive command.
Even though this patch is "stand-alone", it assumes a previous related patch (in Anthony staging tree), that passes
the readonly attribute of the drive to the guest OS, applied first.
This enables sharing same image between guests, with readonly access.
Implementaion mark the drive as read_only and changes the flags when actually opening the file.
The readonly attribute of a qcow also passed to it's base file.
For ide that cannot pass the readonly attribute to the guest OS, disallow the readonly flag.
Also, return error code from bdrv_truncate for readonly drive.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Images with disk size 0 may be used for
VM snapshots, but not to save normal block data.
It is possible to create such images using
qemu-img, but opening them later fails.
So even "qemu-img info image.qcow2" is not
possible for an image created with
"qemu-img create -f qcow2 image.qcow2 0".
This is fixed here.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
b55a37c981 moved the call to cpu_reset
to user emulators. But cpu_copy also initializes a CPU structure, so add the
call also there.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Problem: x86 systems could not survive a few system_resets.
Clear most of IDE state when reset. Implement the missing reset handlers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.
Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running
I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.
[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The page 108 of the SPARC Version 8 Architecture Manual describes
that addcc and addxcc shall compute carry flag the same way.
The page 110 claims the same about subcc and subxcc instructions.
This patch fixes carry computation in corner cases and removes redundant code.
The most visible effect of the patch is enabling Solaris boot when using OBP.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds SHDC support (-sd sd.img, where sd.img is
larger than 1GB) to qemu.
Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
You would only see this error on a fresh clone when srcdir == objdir. configure
will fail because roms/pcbios doesn't exist.
git submodule integration doesn't cleanup very well when switching between
branches so you'll get an roms/pcbios directory from normal operations if you
switch between old branches.
Thanks to a mistake in configure, if you build outside of srcdir, you'll also
get a valid roms/pcbios.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 71f4effce7
Author: Alexander Graf <agraf@suse.de>
Date: Fri Oct 30 22:27:00 2009 +0100
Unbreak tap compilation on OS X
Broke the build on Linux due to a bad #if guard
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently compiling the tap sources breaks on Mac OS X. This is because of:
1) tap-linux.h requiring Linux includes
2) typos
3) missing #includes
This patch adds what's necessary to compile tap happily on Mac OS X.
I haven't tested if using tap actually works, but I don't think that's a
major issue as that code was probably seriously untested before already.
I didn't split the patch, because it's only a few lines of code and
splitting is probably not worth the effort here.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Isaku Yamahata