Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-14-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In addition, drop the nbd_unix_socket assignment in 241 because it does
not really do anything.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-6-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-5-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Specifying this optional parameter allows creating temporary files in
other directories than the test_dir; for example in sock_dir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unix sockets generally have a maximum path length. Depending on your
$TEST_DIR, it may be exceeded and then all tests that create and use
Unix sockets there may fail.
Circumvent this by adding a new scratch directory specifically for
Unix socket files. It defaults to a temporary directory (mktemp -d)
that is completely removed after the iotests are done.
(By default, mktemp -d creates a /tmp/tmp.XXXXXXXXXX directory, which
should be short enough for our use cases.)
Use mkdir -p to create the directory (because it seems right), and do
the same for $TEST_DIR (because there is no reason for that to be
created in any different way).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191017133155.5327-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-7-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
(And skip the whole test if null-co is not whitelisted.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-6-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This lets tests use skip_if_unsupported() with a potentially variable
list of required formats.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-5-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
skip_if_unsupported() should use the stronger variant case_skip(),
because this allows it to be used even with setUp() (in a meaningful
way).
In the process, make it explicit what we expect the first argument of
the func_wrapper to be (namely something derived of QMPTestCase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-4-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
case_notrun() does not actually skip the current test case. It just
adds a "notrun" note and then returns to the caller, who manually has to
skip the test. Generally, skipping a test case is as simple as
returning from the current function, but not always: For example, this
model does not allow skipping tests already in the setUp() function.
Thus, add a QMPTestCase.case_skip() function that invokes case_notrun()
and then self.skipTest(). To make this work, we need to filter the
information on how many test cases were skipped from the unittest
output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 20190917092004.999-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use null-co basically everywhere in the iotests. Unless we want to
test null-aio specifically, we should use it instead (for consistency).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190917092004.999-2-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl2zTpwACgkQ+9DbCVqe
KkQm7Af/co4HilswuPFIdfHDlsxR4UzdEWjdzFVjZl/3eeV52tRD+46ybfxGRQkL
drbf5sekgnQmRZQw74l9FrXXnZmmVZk0rX7T45t/58gARZgrvDmkCqbUBE4DXQLz
Oleqdi6yOOH3N2oszu5skPB6qF8FvQesTrHzAh1KDyUG3mQIbV0mQNmAyVtvIzEz
Jpro16ar6/PeZfp8Elp7ysrWA80cZIKKwMQonBIdEF4OK1DCSnW/Szw3uj0Jbnkp
cSCiEprPhb94Dm2a8DKrIQrPpFzIUvDJQmCqYyiufB3KLsH5bfps0zs3NBY44GjV
sM6SmSExhwPAu5JvwnqM7tYw5RLeAA==
=KxjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-251019-3' into staging
Testing updates (split from mega PR)
- various Travis dependency updates
- enable tcg debug for check-tcg
- additional Xcode build for Cirrus
- dependency tweak for gitlab
# gpg: Signature made Fri 25 Oct 2019 20:35:56 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-251019-3:
tests/docker: update Travis image to a more current version
tests/docker: set HOST_ARCH if we don't have ARCH
travis.yml: --enable-debug-tcg to check-tcg
gitlab-ci.yml: Use libvdeplug-dev to compile-test the VDE network backend
travis.yml: cache the clang sanitizer build
tests/vm/netbsd: Disable IPv6
tests/vm: Let subclasses disable IPv6
cirrus.yml: add latest Xcode build target
travis.yml: bump Xcode 10 to latest dot release
travis.yml: Test the release tarball
travis.yml: Fix the ccache lines
travis.yml: Use newer version of libgnutls and libpng
travis.yml: Use libsdl2 instead of libsdl1.2, and install libsdl2-image
travis.yml: Add libvdeplug-dev to compile-test net/vde.c
travis.yml: reduce scope of the --enable-debug build
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This isn't the latest one available on hub.docker.com but it does
match the ID reported by the Xenial builds running on Travis:
instance: ... travis-ci-sardonyx-xenial-1553530528-f909ac5
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As the docker rules want to be able to be run on a virgin unconfigured
checkout add a fallback and use it if we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Commit 9090d3332c added tests for specific to the 32-bit
machines, which inadvertently make the 64-bit tests failing.
Now than we have this information available in the CPU_INFO
array, use it to have the 64-bit tests back.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-12-f4bug@amsat.org>
The qcow and kernel images use a similar pattern regarding they
are for big/little endianess, or 32/64 bit.
Refactor using more dictionary keys.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-11-f4bug@amsat.org>
Match on stricter console output.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-10-f4bug@amsat.org>
Remove duplicated test (probably copy/paste error in
commit 9090d3332c).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-9-f4bug@amsat.org>
If a test fails, it can corrupt the underlying QCow2 image,
making further tests failing.
Fix this by running each test with a snapshot.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-8-f4bug@amsat.org>
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=JZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.
Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Implement the VIRTIO 1.0 virtio-pci interface. The main change here is
that the register layout is no longer a fixed layout in BAR 0. Instead
we have to iterate of PCI Capabilities to find descriptions of where
various registers are located. The vring registers are also more
fine-grained, allowing for more flexible vring layouts, but we don't
take advantage of that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191023100425.12168-17-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface. Extract existing code in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-16-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Legacy virtio-pci interface always uses BAR 0. VIRTIO 1.0 may need
to use a different BAR index, so make it configurable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-15-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO 1.0 code will need to perform additional steps but it will
reuse the common virtqueue setup/cleanup code. Make these functions
public.
Make sure to invoke callbacks via QVirtioBus instead of directly calling
the virtio-pci Legacy versions of these functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-14-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MSI-X vectors are programmed differently in the VIRTIO 1.0 and
Legacy interfaces. Introduce callbacks so different implementations can
be used depending on the interface version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-13-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just passing the vring page frame number, pass the full
QVirtQueue. This will allow the VIRTIO 1.0 transport to program the
fine-grained vring address registers in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-12-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 PCI devices have multiple PCI_CAP_ID_VNDR capabilities so we
need a way to iterate over them. Extend qpci_find_capability() to take
the last address.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
--
v3:
* Document qpci_find_capability()
Message-Id: <20191023100425.12168-11-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 uses little-endian for the vring. Legacy VIRTIO uses guest
endianness. Adjust the code to handle both.
Note that qvirtio_readq() is not defined because it has no users. All
the other accessors are really needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-10-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device initialization has an extra step in VIRTIO 1.0. The FEATURES_OK
status bit is set to indicate that feature negotiation has completed.
The driver then reads the status register again to check that the device
agrees with the final features.
Implement this step as part of qvirtio_set_features() instead of
introducing a separate function. This way all existing code works
without modifications.
The check in qvirtio_set_driver_ok() needs to be updated because
FEATURES_OK will be set for VIRTIO 1.0 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-9-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
According to VIRTIO 1.1 "3.1.1 Driver Requirements: Device
Initialization", configuration space and virtqueues cannot be accessed
before features have been negotiated. Enforce this requirement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-8-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
VIRTIO Device Initialization requires feature negotiation. The libqos
virtio-9p driver lacks feature negotiation and is therefore
non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-7-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
VIRTIO Device Initialization requires that feature negotiation has
completed before virtqueues are set up. This makes sense because the
driver must know whether it is operating in Legacy or VIRTIO 1.0 mode
before it can access vring fields with the correct endianness.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-6-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO Device Initialization requires feature negotiation. Currently
virtio-scsi-test.c is non-compliant.
libqos tests acknowledge all feature bits advertised by the device,
except VIRTIO_F_BAD_FEATURE (which devices use to detect broken
drivers!) and VIRTIO_RING_F_EVENT_IDX (which is not implemented in
libqos and accepting it would break notifications).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191023100425.12168-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth" <thuth@redhat.com>
In VIRTIO 1.0 feature bits changed from 32-bit to 64-bit. (In fact, the
transports allow even more feature bits but nothing uses more than 64
bits today.)
Add 64-bit feature bit support to virtio-mmio and virtio-pci. This will
be necessary for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There was no real virtio-mmio ABI change between Legacy and VIRTIO 1.0
except that the Version field was incremented from 1 to 2.
However, QEMU does not allow Legacy drivers to perform VIRTIO 1.0
operations like accessing 64-bit feature bits. Since we will introduce
64-bit feature bit support we need a way to differentiate between
virtio-mmio Version 1 and 2 to avoid upsetting QEMU when we operate in
Legacy mode.
Stash away the Version field so later patches can change behavior
depending on the version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VIRTIO Configuration Space cannot be accessed before device feature
bits have been read because a driver doesn't know the endianness until
it has checked VIRTIO_F_VERSION_1.
Fix this problem in preparation for VIRTIO 1.0 support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191023100425.12168-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MC146818 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Use copyright statement from 80cabfad16 for "hw/rtc/mc146818rtc.h".
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The ISA default number for the RTC devices is not related to its
registers neither. Move this definition to "hw/timer/mc146818rtc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018133547.10936-3-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add test, which starts backup to nbd target and restarts nbd server
during backup.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191009084158.15614-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 8aa3a33e44 "tests/qapi-schema: Test for good feature lists in
structs" neglected to cover documentation comments, and the previous
commit followed its example. Make up for them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-4-armbru@redhat.com>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
Command and event details are indented three spaces, everything else
four. Messed up in commit 156402e504. Use four spaces consistently.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20191018081454.21369-2-armbru@redhat.com>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time. We have worse tests. It's
still annoying when you work on the QAPI generator.
Some 1.4s user + system time is consumed by make figuring out what to
do, measured by making a target that does nothing. There's nothing I
can do about that right now. But let's see what we can do about the
other 8s.
Almost 7s are spent running test-qapi.py for every test case, the rest
normalizing and diffing test-qapi.py output. We have 190 test cases.
If I downgrade to python2, it's 4.5s, but python2 is a goner.
Hacking up test-qapi.py to exit(0) without doing anything makes it
only marginally faster. The problem is Python startup overhead.
Our configure puts -B into $(PYTHON). Running without -B is faster:
4.4s.
We could improve the Makefile to run test cases only when the test
case or the generator changed. But I'm after improvement in the case
where the generator changed.
test-qapi.py is designed to be the simplest possible building block
for a shell script to do the complete job (it's actually a Makefile,
not a shell script; no real difference). Python is just not meant for
that. It's for bigger blocks.
Move the post-processing and diffing into test-qapi.py, and make it
capable of testing multiple schema files. Set executable bits while
there.
Running it once per test case now takes slightly longer than 8s. But
running it once for all of them takes under 0.2s.
Messing with the Makefile to run it only on the tests that need
retesting is clearly not worth the bother.
Expected error output changes because the new normalization strips off
$(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/.
The .exit files go away, because there is no exit status to test
anymore.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-5-armbru@redhat.com>
Commit bc52d03ff5 "qapi: Make doc comments optional where we don't
need them" made scripts/qapi2texi.py fail[*] unless the schema had
pragma 'doc-required': true. The stated reason was inability to cope
with incomplete documentation.
When commit fb0bc835e5 "qapi-gen: New common driver for code and doc
generators" folded scripts/qapi2texi.py into scripts/qapi-gen.py, it
turned the failure into silent suppression.
The doc generator can cope with incomplete documentation now. I don't
know since when, or what the problem was, or even whether it ever
existed.
Drop the silent suppression.
[*] The fail part was broken, fixed in commit e8ba07ea9a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-2-armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-8-vsementsov@virtuozzo.com
[Maintainer edit: removed 260 from auto group per Peter Maydell. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Reopening bitmaps to RW was broken prior to previous commit. Check that
it works now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
hbitmap_reset has an unobvious property: it rounds requested region up.
It may provoke bugs, like in recently fixed write-blocking mode of
mirror: user calls reset on unaligned region, not keeping in mind that
there are possible unrelated dirty bytes, covered by rounded-up region
and information of this unrelated "dirtiness" will be lost.
Make hbitmap_reset strict: assert that arguments are aligned, allowing
only one exception when @start + @count == hb->orig_size. It's needed
to comfort users of hbitmap_next_dirty_area, which cares about
hb->orig_size.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190806152611.280389-1-vsementsov@virtuozzo.com>
[Maintainer edit: Max's suggestions from on-list. --js]
[Maintainer edit: Eric's suggestion for aligned macro. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit bc1fb850a3 silently broke device_add test for CPU hotplug which
resulted in test successfully passing though it wasn't actually run.
Fix it by making sure that all non present CPUs reported
by "query-hotpluggable-cpus" are hotplugged instead of making up
and hardcoding values.
Use of query-hotpluggable-cpus also allows consolidatiate device_add
cpu testcases and reuse the same test function for all targets.
While at it also add a check that at least one CPU was hotplugged,
to avoid silent breakage in the future.
Fixes: bc1fb850a3 (vl.c deprecate incorrect CPUs topology)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190830110723.15096-3-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add an API that takes QDict directly, so users could skip steps
of first building json dictionary and converting it back to
QDict in existing qtest_qmp_device_add() and instead use QDict
directly without intermediate conversion.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190830110723.15096-2-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Convert the ptimer test cases to the transaction-based ptimer API,
by changing to ptimer_init(), dropping the now-unused QEMUBH
variables, and surrounding each set of changes to the ptimer
state in ptimer_transaction_begin/commit calls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-4-peter.maydell@linaro.org
Currently the ptimer design uses a QEMU bottom-half as its
mechanism for calling back into the device model using the
ptimer when the timer has expired. Unfortunately this design
is fatally flawed, because it means that there is a lag
between the ptimer updating its own state and the device
callback function updating device state, and guest accesses
to device registers between the two can return inconsistent
device state.
We want to replace the bottom-half design with one where
the guest device's callback is called either immediately
(when the ptimer triggers by timeout) or when the device
model code closes a transaction-begin/end section (when the
ptimer triggers because the device model changed the
ptimer's count value or other state). As the first step,
rename ptimer_init() to ptimer_init_with_bh(), to free up
the ptimer_init() name for the new API. We can then convert
all the ptimer users away from ptimer_init_with_bh() before
removing it entirely.
(Commit created with
git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/'
and three overlong lines folded by hand.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJdpJwuAAoJEH8JsnLIjy/W4EIP/ieDG6LwYIkxk6UPAnPm2ZtT
jEBj1jZNbPPMVPCzeVryS2qgoSB4ItnKlSpbW9Z+DX2EL8gr/sHZot4J6BXkxaJV
mxHa4KCLZUYHfLbVBX+ubb/fufu2ItGUtY2LcdxyWASk/6mWKYVivPunwaK4gEiD
CBl9RgSMSy1bpBGIky2NMylOCr5KlSeweH/XL3J3Jodpp/3nnDpZ96iy953R7Bes
OpwZEsDHQmYhDufPqIWVzyq2hEUn22kGe/Rn2KfOHO7SR6aqr+DqtUwlDE9mxxBf
hFhm6bqbJhHQOTMbTrzqiYwDirR4S5/FlynI9+YbngU9fnkbCIOheTKL5M8PlSow
H+ZUtmU1Avp0wG3RZVmtCT9upFV7hpC4/fiMr8bdXCyuWy/7d7WB1G4e9ELiX7uo
VCl6gVviDQbEgnoNS7v6JbP/xjhHuu7Fxh5K0xgT6wtwP53cBqbxORMkwv2u3zCI
QRuiKOHZW3wv8tdRP/5qhdtIxTy6w20v/lAO/s0Xqn8YlnyfrH71LCNWmG4MOfgP
ZXwCv9nxpzVsTPU2nLowl0avCwmDVY8Iv/0sN+eybo8xp47pCmPV9dKa0rJ+RhFe
N5blnnwsmJFPW+QD5gBZn7eH3jafHxN2URhG3cwNdWxQS6SiTcVXDsTfn5YB6PjN
Tb9P2aUJYw94BvUJF2c+
=gCHy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- block: Fix crash with qcow2 partial cluster COW with small cluster
sizes (misaligned write requests with BDRV_REQ_NO_FALLBACK)
- qcow2: Fix integer overflow potentially causing corruption with huge
requests
- vhdx: Detect truncated image files
- tools: Support help options for --object
- Various block-related replay improvements
- iotests/028: Fix for long $TEST_DIRs
# gpg: Signature made Mon 14 Oct 2019 17:02:54 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: Test large write request to qcow2 file
qcow2: Limit total allocation range to INT_MAX
qemu-nbd: Support help options for --object
qemu-img: Support help options for --object
qemu-io: Support help options for --object
vl: Split off user_creatable_print_help()
iotests/028: Fix for long $TEST_DIRs
block: Reject misaligned write requests with BDRV_REQ_NO_FALLBACK
replay: add BH oneshot event for block layer
replay: finish record/replay before closing the disks
replay: don't drain/flush bdrv queue while RR is working
replay: update docs for record/replay with block devices
replay: disable default snapshot for record/replay
block: implement bdrv_snapshot_goto for blkreplay
block/vhdx: add check for truncated image files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without HEAD^, the following happens when you attempt a large write
request to a qcow2 file such that the number of bytes covered by all
clusters involved in a single allocation will exceed INT_MAX:
(A) handle_alloc_space() decides to fill the whole area with zeroes and
fails because bdrv_co_pwrite_zeroes() fails (the request is too
large).
(B) If handle_alloc_space() does not do anything, but merge_cow()
decides that the requests can be merged, it will create a too long
IOV that later cannot be written.
(C) Otherwise, all parts will be written separately, so those requests
will work.
In either B or C, though, qcow2_alloc_cluster_link_l2() will have an
overflow: We use an int (i) to iterate over nb_clusters, and then
calculate the L2 entry based on "i << s->cluster_bits" -- which will
overflow if the range covers more than INT_MAX bytes. This then leads
to image corruption because the L2 entry will be wrong (it will be
recognized as a compressed cluster).
Even if that were not the case, the .cow_end area would be empty
(because handle_alloc() will cap avail_bytes and nb_bytes at INT_MAX, so
their difference (which is the .cow_end size) will be 0).
So this test checks that on such large requests, the image will not be
corrupted. Unfortunately, we cannot check whether COW will be handled
correctly, because that data is discarded when it is written to null-co
(but we have to use null-co, because writing 2 GB of data in a test is
not quite reasonable).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For long test image paths, the order of the "Formatting" line and the
"(qemu)" prompt after a drive_backup HMP command may be reversed. In
fact, the interaction between the prompt and the line may lead to the
"Formatting" to being greppable at all after "read"-ing it (if the
prompt injects an IFS character into the "Formatting" string).
So just wait until we get a prompt. At that point, the block job must
have been started, so "info block-jobs" will only return "No active
jobs" once it is done.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_REQ_NO_FALLBACK flag means that an operation should only be
performed if it can be offloaded or otherwise performed efficiently.
However a misaligned write request requires a RMW so we should return
an error and let the caller decide how to proceed.
This hits an assertion since commit c8bb23cbdb if the required
alignment is larger than the cluster size:
qemu-img create -f qcow2 -o cluster_size=2k img.qcow2 4G
qemu-io -c "open -o driver=qcow2,file.align=4k blkdebug::img.qcow2" \
-c 'write 0 512'
qemu-io: block/io.c:1127: bdrv_driver_pwritev: Assertion `!(flags & BDRV_REQ_NO_FALLBACK)' failed.
Aborted
The reason is that when writing to an unallocated cluster we try to
skip the copy-on-write part and zeroize it using BDRV_REQ_NO_FALLBACK
instead, resulting in a write request that is too small (2KB cluster
size vs 4KB required alignment).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly cleanups and minor fixes
[Note I'm seeing a hang on the aarch64 hosted x86-64 tcg migration
test in xbzrle; but I'm seeing that on current head as well]
-----BEGIN PGP SIGNATURE-----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=Jouv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20191011a' into staging
Migration pull 2019-10-11
Mostly cleanups and minor fixes
[Note I'm seeing a hang on the aarch64 hosted x86-64 tcg migration
test in xbzrle; but I'm seeing that on current head as well]
# gpg: Signature made Fri 11 Oct 2019 20:14:31 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20191011a: (21 commits)
migration: Support gtree migration
migration/multifd: pages->used would be cleared when attach to multifd_send_state
migration/multifd: initialize packet->magic/version once at setup stage
migration/multifd: use pages->allocated instead of the static max
migration/multifd: fix a typo in comment of multifd_recv_unfill_packet()
migration/postcopy: check PostcopyState before setting to POSTCOPY_INCOMING_RUNNING
migration/postcopy: rename postcopy_ram_enable_notify to postcopy_ram_incoming_setup
migration/postcopy: postpone setting PostcopyState to END
migration/postcopy: mis->have_listen_thread check will never be touched
migration: report SaveStateEntry id and name on failure
migration: pass in_postcopy instead of check state again
migration/postcopy: fix typo in mark_postcopy_blocktime_begin's comment
migration/postcopy: map large zero page in postcopy_ram_incoming_setup()
migration/postcopy: allocate tmp_page in setup stage
migration: Don't try and recover return path in non-postcopy
rcu: Use automatic rc_read unlock in core memory/exec code
migration: Use automatic rcu_read unlock in rdma.c
migration: Use automatic rcu_read unlock in ram.c
migration: Fix missing rcu_read_unlock
rcu: Add automatically released rcu_read_lock variants
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests/test-bdrv-drain can hang in tests/iothread.c:iothread_run():
while (!atomic_read(&iothread->stopping)) {
aio_poll(iothread->ctx, true);
}
The iothread_join() function works as follows:
void iothread_join(IOThread *iothread)
{
iothread->stopping = true;
aio_notify(iothread->ctx);
qemu_thread_join(&iothread->thread);
If iothread_run() checks iothread->stopping before the iothread_join()
thread sets stopping to true, then aio_notify() may be optimized away
and iothread_run() hangs forever in aio_poll().
The correct way to change iothread->stopping is from a BH that executes
within iothread_run(). This ensures that iothread->stopping is checked
after we set it to true.
This was already fixed for ./iothread.c (note this is a different source
file!) by commit 2362a28ea1 ("iothread:
fix iothread_stop() race condition"), but not for tests/iothread.c.
Fixes: 0c330a734b
("aio: introduce aio_co_schedule and aio_co_wake")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191003100103.331-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce support for GTree migration. A custom save/restore
is implemented. Each item is made of a key and a data.
If the key is a pointer to an object, 2 VMSDs are passed into
the GTree VMStateField.
When putting the items, the tree is traversed in sorted order by
g_tree_foreach.
On the get() path, gtrees must be allocated using the proper
key compare, key destroy and value destroy. This must be handled
beforehand, for example in a pre_load method.
Tests are added to test save/dump of structs containing gtrees
including the virtio-iommu domain/mappings scenario.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20191011121724.433-1-eric.auger@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
uintptr_t fixup for test on 32bit
Linux 5.3 has made 0.0.0.0/8 a working IPv4 subnet. As such, "42" is
now a valid host, and the connection to it will (hopefully) time out
over a long period rather than quickly return with EINVAL.
So let us use a negative integer for testing that NBD will not crash
when it receives integer hosts. This way, the connection will again
fail quickly and reliably.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191002174052.5773-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some distros are now defaulting to LUKS version 2 which QEMU cannot
process. For our I/O test that validates interoperability between the
kernel/cryptsetup and QEMU, we need to explicitly ask for version 1
of the LUKS format.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190927101155.25896-1-berrange@redhat.com
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
125 should not use qemu-img to get the on-disk image size, because that
reports it in a human-readable format that is useless to us. Just use
stat instead (like we do to get the image file length).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
And by that I mean all XFS versions, as far as I can tell. All details
are in the comment below.
We never noticed this problem because we only read the first number from
qemu-img info's "disk size" output -- and that is effectively useless,
because qemu-img prints a human-readable value (which generally includes
a decimal point). That will be fixed in the next patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we use growth_mode = metadata, it is very much possible that the file
uses more disk space after we have written something to the added area.
We did indeed want to test for this case, but unfortunately we evidently
just copied the code from the "Test creation preallocation" section and
forgot to replace "$create_mode" by "$growth_mode".
We never noticed because we only read the first number from qemu-img
info's "disk size" output -- and that is effectively useless, because
qemu-img prints a human-readable value (which generally includes a
decimal point). That will be fixed in the patch after the next one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
SCSI devices are unused in test, drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
After previous commit Drive.device is actually unused. Drop it together
with .name property. While being here reuse .node in qmp commands
instead of writing 'drive0' twice.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
After backup-top filter appearing it's not possible to see dirty
bitmaps in top node, so use node-name instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Upcoming asynchronous handling of sub-parts of qcow2 requests will
change number of leaked clusters and even make it racy. As a
preparation, ignore leaks on failure parts in 026.
It's not trivial to just grep or substitute qemu-img output for such
thing. Instead do better: 3 is a error code of qemu-img check, if only
leaks are found. Catch this case and print success output.
Suggested-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl2coyIACgkQnKSrs4Gr
c8iE1AgAh1ACKXmuH+ml3jkKniLVpr4KEIWB5CmlMSQtmv2Hteyi+cI+T/WvhFGB
Xw8yW1yxVeV98lPWZJeb06s/Ry/ZXef+D63i6xcQzc/3a6pTJKeLdi8acbJuSRso
A3VjQaczjrP9GOPvOoy3XkXoLr5nuD4NI8TYMmhWgwb6eSETUHGYgQo1uoZkqkuF
4/K856dtN2wb3WqChdwBhg+1o8WRpxEZ74pVC0SBGtKcBDjiY7J/BEXfNJo5M4gJ
s1x3FVpSN19LYljgo4WCJt/hzMkOSy0uV4mSzCx6U/dEB+w+VUvuZ7wTt69Kweji
vTMsFDN67Xzq8xWqeiG5uGBM8NRIwQ==
=zUDj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
# gpg: Signature made Tue 08 Oct 2019 15:54:26 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
iotests/262: Switch source/dest VM launch order
block: Skip COR for inactive nodes
virtio-blk: schedule virtio_notify_config to run on main context
util/ioc.c: try to reassure Coverity about qemu_iovec_init_extended
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Launching the destination VM before the source VM gives us a regression
test for HEAD^:
The guest device causes a read from the disk image through
guess_disk_lchs(). This will not work if the first sector (containing
the partition table) is yet unallocated, we use COR, and the node is
inactive.
By launching the source VM before the destination, however, the COR
filter on the source will allocate that area in the image shared between
both VMs, thus the problem will not become apparent.
Switching the launch order causes the sector to still be unallocated
when guess_disk_lchs() runs on the inactive node in the destination VM,
and thus we get our test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191001174827.11081-3-mreitz@redhat.com
Message-Id: <20191001174827.11081-3-mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drop Python2 dependency in EDK2 build scripts.
-----BEGIN PGP SIGNATURE-----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=BE2l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20191007' into staging
Improve scripts relying on the EDK2 submodule,
drop Python2 dependency in EDK2 build scripts.
# gpg: Signature made Mon 07 Oct 2019 14:31:38 BST
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/edk2-next-20191007:
edk2 build scripts: work around TianoCore#1607 without forcing Python 2
edk2 build scripts: honor external BaseTools flags with uefi-test-tools
roms: Add a 'make help' target alias
roms/Makefile.edk2: don't pull in submodules when building from tarball
make-release: pull in edk2 submodules so we can build it from tarballs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It turns out that forcing python2 for running the edk2 "build" utility is
neither necessary nor sufficient.
Forcing python2 is not sufficient for two reasons:
- QEMU is moving away from python2, with python2 nearing EOL,
- according to my most recent testing, the lacking dependency information
in the makefiles that are generated by edk2's "build" utility can cause
parallel build failures even when "build" is executed by python2.
And forcing python2 is not necessary because we can still return to the
original idea of filtering out jobserver-related options from MAKEFLAGS.
So do that.
While at it, cut short edk2's auto-detection of the python3.* minor
version, by setting PYTHON_COMMAND to "python3" (which we expect to be
available wherever we intend to build edk2).
With this patch, the guest UEFI binaries that are used as part of the BIOS
tables test, and the OVMF and ArmVirtQemu platform firmwares, will be
built strictly in a single job, regardless of an outermost "-jN" make
option. Alas, there appears to be no reliable way to build edk2 in an
(outer make, inner make) environment, with a jobserver enabled.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Unify the recipe for "build-edk2-tools" in
"tests/uefi-test-tools/Makefile" with the recipe for "edk2-basetools" in
"roms/Makefile".
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This adds numamem and memhp tests for arm/virt platform.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-12-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is in preparation to add numamem and memhp tests to
arm/virt platform. The bios-tables-test-allowed-diff.h
is updated with a list of expected ACPI tables that needs to be
present in tests/data/acpi/virt folder.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20190918130633.4872-11-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This initializes the GED device with base memory and irq, configures
ged memory hotplug event and builds the corresponding aml code. With
this, both hot and cold plug of device memory is enabled now for Guest
with ACPI boot. Memory cold plug support with Guest DT boot is not yet
supported.
As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h
to avoid "make check" failure.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
-fsanitize=undefined is not the same thing as --enable-sanitizers. After
commit 47c823e ("tests/docker: add sanitizers back to clang build", 2019-09-11)
test-clang is almost duplicating the asan (test-debug) test, so
partly revert commit 47c823e5b while leaving ubsan enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Serial test is currently hard-coded to /dev/null.
On Windows, serial chardev expect a COM: device, which may not be
availble.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are just too many leaks in device-introspect-test (especially for
the plethora of arm and aarch64 boards) to make LeakSanitizer useful;
disable it for now.
Whoever is interested in debugging leaks can also use valgrind like this:
QTEST_QEMU_BINARY=aarch64-softmmu/qemu-system-aarch64 \
QTEST_QEMU_IMG=qemu-img \
valgrind --trace-children=yes --leak-check=full \
tests/device-introspect-test -p /aarch64/device/introspect/concrete/defaults/none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some scripts check the Python version number and have two code paths to
accomodate both Python 2 and 3. Remove the code specific to Python 2 and
assert the minimum version of 3.6 instead (check skips Python tests in
this case, so the assertion would only ever trigger if a Python script
is executed manually).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Running iotests is not required to build QEMU, so we can have stricter
version requirements for Python here and can make use of new features
and drop compatibility code earlier.
This makes qemu-iotests skip all Python tests if a Python version before
3.6 is used for the build.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190909131335.16848-4-yury-kotov@yandex-team.ru>
[Reorganize check_migration_status for rebase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CNvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-09-28' into staging
QAPI patches for 2019-09-28
# gpg: Signature made Sat 28 Sep 2019 16:18:13 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-09-28: (27 commits)
qapi: Improve source file read error handling
qapi: Improve reporting of redefinition
qapi: Improve reporting of missing documentation comment
qapi: Eliminate check_keys(), rename check_known_keys()
qapi: Improve reporting of invalid 'if' further
qapi: Avoid redundant definition references in error messages
qapi: Improve reporting of missing / unknown definition keys
qapi: Improve reporting of invalid flags
qapi: Improve reporting of invalid 'if' errors
qapi: Move context-free checking to the proper place
qapi: Move context-sensitive checking to the proper place
qapi: Inline check_name() into check_union()
qapi: Plumb info to the QAPISchemaMember
qapi: Make check_type()'s array case a bit more obvious
qapi: Move check for reserved names out of add_name()
qapi: Report invalid '*' prefix like any other invalid name
qapi: Use check_name_str() where it suffices
qapi: Improve reporting of invalid name errors
qapi: Reorder check_FOO() parameters for consistency
qapi: Improve reporting of member name clashes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everybody who used something like "-machine accel=kvm:tcg" in the past
might be tempted to specify a similar list with the -accel parameter,
too, for example "-accel kvm:tcg". However, this is not how this
options is thought to be used, since each "-accel" should only take care
of one specific accelerator.
In the long run, we really should rework the "-accel" code completely,
so that it does not set "-machine accel=..." anymore internally, but
is completely independent from "-machine". For the short run, let's
make sure that users cannot use "-accel xyz:tcg", so that we avoid
that we have to deal with such cases in the wild later.
Message-Id: <20190930123505.11607-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While at it, simplify using $(land).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-3-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: dad5ddcea3 ("check: Only test usb-ehci when it is compiled in")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes commit
e5758de4e8 ("tests/libqtest: Make
qtest_qmp_device_add/del independent from global_qtest")
and commit
dd21074972 ("tests/libqtest: Use
libqtest-single.h in tests that require global_qtest").
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-2-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----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=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
qapi-gen.py crashes when it can't open the main schema file, and when
it can't read from any schema file. Lazy.
Change QAPISchema.__init__() to take a file name instead of a file
object. Move the open code from _include() to __init__(), so it's
used for the main schema file, too.
Move the read into the try for good measure, and rephrase the error
message.
Reporting open or read failure for the main schema file needs a
QAPISourceInfo representing "no source". Make QAPISourceInfo cope
with fname=None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-27-armbru@redhat.com>
Point to the previous definition, unless it's a built-in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-26-armbru@redhat.com>
Have check_exprs() check this later, so the error message gains an "in
definition line". Tweak the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-25-armbru@redhat.com>
check_if()'s errors don't point to the offending part of the
expression. For instance:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' makes no sense
Other check_FOO() do, with the help of a @source argument. Make
check_if() do that, too. The example above improves to:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' of 'data' member 'branch' makes no sense
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many error messages refer to the offending definition even though
they're preceded by an "in definition" line. Rephrase them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-22-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Have check_exprs() call check_keys() later, so its error messages gain
an "in definition" line.
Both check_keys() and check_name_is_str() check the definition's name
is a string. Since check_keys() now runs after check_name_is_str()
rather than before, its check is dead. Bury it. Checking values in
check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-21-armbru@redhat.com>
Split check_flags() off check_keys() and have check_exprs() call it
later, so its error messages gain an "in definition" line. Tweak the
error messages.
Checking values in a function named check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-20-armbru@redhat.com>
Move check_if() from check_keys() to check_exprs() and call it later,
so its error messages gain an "in definition" line.
Checking values in a function named check_keys() is unclean anyway.
The original sin was commit 0545f6b887 "qapi: Better error messages
for bad expressions", which checks the value of key 'name'. More
sinning in commit 2cbf09925a "qapi: More rigorous checking for type
safety bypass", commit c818408e44 "qapi: Implement boxed types for
commands/events", and commit 967c885108 "qapi: add 'if' to top-level
expressions". This commit does penance for the latter. The next
commits will do penance for the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-19-armbru@redhat.com>
QAPISchemaCommand.check() and QAPISchemaEvent().check() check 'data'
is present when 'boxed': true. That's context-free. Move to
check_command() and check_event().
Tweak the error message while there.
check_exprs() & friends now check exactly what qapi-code-gen.txt calls
the second layer of syntax.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-18-armbru@redhat.com>
When we introduced the QAPISchema intermediate representation (commit
ac88219a6c), we took a shortcut: we left check_exprs() & friends
alone instead of moving semantic checks into the
QAPISchemaFOO.check(). The .check() assert check_exprs() did its job.
Time to finish the conversion job. Move exactly the context-sensitive
checks to the .check(). They replace assertions there. Context-free
checks stay put.
Fixes the misleading optional tag error demonstrated by test
flat-union-optional-discriminator.
A few other error message improve.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-17-armbru@redhat.com>
The checks for reserved names are spread far and wide. Move one from
add_name() to new check_defn_name_str(). This is a first step towards
collecting them all in dedicated name checking functions next to
check_name().
While there, drop the quotes around the meta-type in
check_name_str()'s error messages: "'command' uses ... name 'NAME'"
becomes "command uses ... name 'NAME'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-13-armbru@redhat.com>
The special "does not allow optional name" error is well meant, but
confusing in practice. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-12-armbru@redhat.com>
Split check_name() into check_name_is_str() and check_name_str(), keep
check_name() as a wrapper.
Move add_name()'s call into its caller check_exprs(), and inline.
This permits delaying check_name_str() there, so its error message
gains an "in definition" line.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-10-armbru@redhat.com>
We report name clashes like this:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: 'name' (member of Sub) collides with 'name' (member of Base)
The "(member of Sub)" is redundant with "In struct 'Sub'". Comes from
QAPISchemaMember.describe(). Pass info to it, so it can detect the
redundancy and avoid it. Result:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: member 'name' collides with member 'name' of type 'Base'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-8-armbru@redhat.com>
Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message. The next patch will do that. Switch to lower case
to keep it simpler.
For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"
While there, avoid breaking lines containing multiple arguments in the
middle of an argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>
QAPISchemaMember.check_clash() checks for member names that map to the
same c_name(). Takes care of rejecting duplicate names.
It also checks a naming rule: no uppercase in member names. That's a
rather odd place to do it. Enforcing naming rules is
check_name_str()'s job.
qapi-code-gen.txt specifies the name case rule applies to the name as
it appears in the schema. check_clash() checks c_name(name) instead.
No difference, as c_name() leaves alone case, but unclean.
Move the name case check into check_name_str(), less the c_name().
New argument @permit_upper suppresses it. Pass permit_upper=True for
definitions (which are not members), and when the member's owner is
whitelisted with pragma name-case-whitelist.
Bonus: name-case-whitelist now applies to a union's inline base, too.
Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead
of CpuInfo's implicit base type's name q_obj_CpuInfo-base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-6-armbru@redhat.com>
We take pains to include the offending expression in error messages,
e.g.
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
But not always:
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Instead of improving them one by one, report the offending expression
whenever it is known, like this:
tests/qapi-schema/enum-if-invalid.json: In enum 'TestIfEnum':
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Error messages that mention the offending expression become a bit
redundant, e.g.
tests/qapi-schema/alternate-any.json: In alternate 'Alt':
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
I'll take care of that later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-5-armbru@redhat.com>
If a command is disabled an error is reported. But due to usage of
error_setg() the class of the error is GenericError which does not
help callers in distinguishing this case from a case where a qmp
command fails regularly due to other reasons.
We used to use class CommandDisabled until the great error
simplification (commit de253f1491 for QMP and commit 93b91c59db for
qemu-ga, both v1.2.0).
Use CommandNotFound error class, which is close enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test update squashed in, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already use semihosting for the system stuff so this is a simple
smoke test to ensure we are working OK on linux-user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-7-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190913151845.12582-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Despite our attempts in 4d26c7fef4 to keep this going it still gets in
the way of "make docker-test-build" completing because of course we
can't build a modern QEMU with the image. Let's put the thing out of
its misery and remove it.
People who really care about building on powerpc can still use the
binfmt_misc support to manually build an image (or just run the build
from pre this commit).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
As part of the push to drop python2 support, replace any explicit python2
dependencies with python3 versions.
For centos, python2 still exists as an implicit dependency, but by adding
python3 we will be able to build even if the configure script begins to
require python 3.5+.
Tested with centos7, fedora, ubuntu, ubuntu1804, and debian 9 (amd64).
Tested under a custom configure script that requires Python 3.5+.
the travis dockerfile is also moved to using python3, which was tested
by running `make docker-test-build@travis`, which I hope is sufficient.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-7-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
debian-sid is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-6-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian-ports is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-5-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There isn't a debian.dockerfile anymore,
so perform some ghost-busting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-4-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian8 partial base is also not consumed by any image, so remove it.
For QEMU's development cycle, we only support debian9 (stretch) and
debian10 (buster).
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-3-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We don't have a debian8-mxe dockerfile anymore.
Fixes: 67bd36beda
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-2-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds two new tests that re-use the memory test to check basic
record replay functionality is still working. We have to define our
own runners rather than using the default pattern as we want to change
the test name but re-use the memory binary.
We declare the test binaries as PHONY as they don't really exist.
[AJB: A better test would output some sort of timer value or other
otherwise variable value so we could compare the record and replay
outputs and ensure they match]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
This is broadly similar to the existing fcvt test for ARM but using
the generic float testing framework. We should be able to pare down
the ARM fcvt test case to purely half-precision with or without the
Alt HP provision.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is a generic floating point multiply and accumulate test for
single precision floating point values. I've split of the common float
functions into a helper library so additional tests can use the same
common code.
As I don't have references for all architectures I've allowed some
flexibility for tests to pass without reference files. They can be
added as we get collect them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now we have fixed the signal delivary bug we can remove this horrible
hack from the system.
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oops; there's no argv here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190913193821.17756-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
There was in the clean-up code caused by attempting to inspect images
which finished before we got there. Clean up the clean up code by:
- only track the one instance at a time
- use --filter for docker ps instead of doing it by hand
- just call docker rm -f to be done with it
- use uuid.uuid4() for a random uid
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When it was based on debian8 which uses python-minimal, it needed this.
It no longer does.
Goodbye, python2.7.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190918222546.11696-1-jsnow@redhat.com>
[AJB: fixed up commit message]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Finger trouble in a previous clean-up inadvertently set
DEBIAN_PARTIAL_IMAGES instead of DOCKER_PARTIAL_IMAGES. Also fix the
typo to debian-9-mxe.
Fixes: 44d5a8bf5d
Signed-off-by: John Snow <jsnow@redhat.com>
[AJB: merged fix from Message-Id: <20190917185537.25417-1-jsnow@redhat.com>]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Fedora23 is but a distant twinkle. The sanitizer works again, and even
if not, we have --enable-sanitizers now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190912014442.5757-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
me: test fixes from (should stop hangs in postcopy tests).
me: An RDMA cleanup hang fix
Wei: Tidy ups around postcopy
Marc-Andre: mem leak fix
-----BEGIN PGP SIGNATURE-----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=61eA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190925a' into staging
Migration pull 2019-09-25
me: test fixes from (should stop hangs in postcopy tests).
me: An RDMA cleanup hang fix
Wei: Tidy ups around postcopy
Marc-Andre: mem leak fix
# gpg: Signature made Wed 25 Sep 2019 15:59:41 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190925a:
migration/postcopy: Recognise the recovery states as 'in_postcopy'
tests/migration/postcopy: trim migration bandwidth
tests/migration: Fail on unexpected migration states
migration/rdma.c: Swap synchronize_rcu for call_rcu
migration/rdma: Don't moan about disconnects at the end
migration: remove sent parameter in get_queued_page_not_dirty
migration/postcopy: unsentmap is not necessary for postcopy
migration/postcopy: not necessary to do discard when canonicalizing bitmap
migration: fix vmdesc leak on vmstate_save() error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Improved error message for plaintext client of encrypted server
- Fix various assertions when -object iothread is in use
- Silence a Coverity error for use-after-free on error path
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl2LbTgACgkQp6FrSiUn
Q2rw/gf8CiEby+/V5AExRf/CQ9TOqFCcIYwbsMpTbGTUJIrF0N7FH/FT6g6wZUMq
JYdHDk77ew0ZoQCLkefl8Bj3ddIcfzIkcL4/AYTZ3KUyPTzmwrejckcQ08qlj+dg
HvnnxmNmtPTi001r4fVLl+OfFVXkw/ACnjoy/tB+UP7ZxV4ADi5UAVyBvnwGFVkP
n4mf7o3tvM05eVhwkbVUSsEDvN2VCMxrNM2Qm6u5njoPuGi06fLpN/5oVTiipvcA
xgLSKNzOVyK3v98eGCxUBsYOtTqLphuhSSTpbwEy1uxRRIoBUpFxfazWXpX0pWl9
m+ibBD5tX6e5sFISMRNu9Q4LrFcutw==
=GqDl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-24-v2' into staging
nbd patches for 2019-09-24
- Improved error message for plaintext client of encrypted server
- Fix various assertions when -object iothread is in use
- Silence a Coverity error for use-after-free on error path
# gpg: Signature made Wed 25 Sep 2019 14:35:52 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-24-v2:
util/qemu-sockets: fix keep_alive handling in inet_connect_saddr
tests: Use iothreads during iotest 223
nbd: Grab aio context lock in more places
nbd/server: attach client channel to the export's AioContext
nbd/client: Add hint when TLS is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On slow hosts with tcg we were sometimes finding that the migration
would complete during precopy and never get into the postcopy test.
Trim back the bandwidth a bit to make that much less likely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923131022.15498-3-dgilbert@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've got various places where we wait for a migration to enter
a given state; but if we enter an unexpected state we tend to fail
in odd ways; add a mechanism for explicitly testing for any state
which we shouldn't be in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923131022.15498-2-dgilbert@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Doing so catches the bugs we just fixed with NBD not properly using
correct contexts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190920220729.31801-1-eblake@redhat.com>
I received an off-list report of failure to connect to an NBD server
expecting an x509 certificate, when the client was attempting something
similar to this command line:
$ ./x86_64-softmmu/qemu-system-x86_64 -name 'blah' -machine q35 -nodefaults \
-object tls-creds-x509,id=tls0,endpoint=client,dir=$path_to_certs \
-device virtio-scsi-pci,id=virtio_scsi_pci0,bus=pcie.0,addr=0x6 \
-drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0 \
-device scsi-hd,id=image1,drive=drive_image1,bootindex=0
qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go)
server reported: Option 0x7 not permitted before TLS
The problem? As specified, -drive is trying to pass tls-creds to the
raw format driver instead of the nbd protocol driver, but before we
get to the point where we can detect that raw doesn't know what to do
with tls-creds, the nbd driver has already failed because the server
complained. The fix to the broken command line? Pass
'...,file.tls-creds=tls0' to ensure the tls-creds option is handed to
nbd, not raw. But since the error message was rather cryptic, I'm
trying to improve the error message.
With this patch, the error message adds a line:
qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go)
Did you forget a valid tls-creds?
server reported: Option 0x7 not permitted before TLS
And with luck, someone grepping for that error message will find this
commit message and figure out their command line mistake. Sadly, the
only mention of file.tls-creds in our docs relates to an --image-opts
use of PSK encryption with qemu-img as the client, rather than x509
certificate encryption with qemu-kvm as the client.
CC: Tingting Mao <timao@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190907172055.26870-1-eblake@redhat.com>
[eblake: squash in iotest 233 fix]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 87adbbffd4..3e270dcacc "qapi: Add 'if' to (implicit
struct|union|alternate) members" (v4.0.0) neglected test coverage, and
promptly failed to check the conditions. Review fail.
Recent commit "tests/qapi-schema: Demonstrate insufficient 'if'
checking" added test coverage, demonstrating the bug. Fix it by add
the missing check_if().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"'if': 'COND'" generates "#if COND". We reject empty COND because it
won't compile. Blank COND won't compile any better, so reject that,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
check_union() checks the discriminator exists in base and makes sense.
Two error messages mention the base. These are broken for anonymous
bases, as demonstrated by tests flat-union-invalid-discriminator and
flat-union-invalid-if-discriminator.err. The third one doesn't
bother.
First broken when commit ac4338f8eb "qapi: Allow anonymous base for
flat union" (v2.6.0) neglected to adjust the "not a member of base"
error message. Commit ccadd6bcba "qapi: Add 'if' to implicit struct
members" (v4.0.0) then cloned the flawed error message.
Dumb them down not to mention the base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Show text up to next structural character, whitespace, or quote
character instead of just the first character.
Forgotten quotes now get reported like "Stray 'command'" instead of
"Stray 'c'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Consistently enclose error messages in double quotes. Use single
quotes within, except for one case of "'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The error message for forgotten quotes around a name shows just the
name's first character, which isn't as nice as it could be. Same for
attempting to use a number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cover invalid 'if' in struct members, features, union and alternate
branches. Four out of four are broken. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment typo fixed]
When the union definition's base is an object, some error messages
show it as an OrderedDict. Oops. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test flat-union-optional-discriminator declares its union tag as
'*switch': 'Enum', and points to it with 'discriminator': '*switch'.
This gets rejected as "discriminator of flat union 'MyUnion' uses
invalid name '*switch'". Correct; member 'discriminator' doesn't
accept a '*' prefix.
However, this merely tests name validity checking, which we already
cover elsewhere. More interesting is testing the valid name 'switch'.
This reports "discriminator 'switch' is not a member of base struct
'Base'", which is misleading.
Copy the existing 'discriminator': '*switch' test to
flat-union-discriminator-bad-name, and rewrite its comment. Change
flat-union-optional-discriminator to test 'discriminator': 'switch',
and mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tests duplicate-key and double-data test the same thing. The former
predates the latter, and it has a better name. Delete the latter, and
tweak the former's comment.
Tests include-format-err and include-extra-junk test the same thing.
The former predates the latter, but the latter has a better name and a
comment. Delete the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous commit made qapi-code-gen.txt define "(top-level)
expression" as either "directive" or "definition". The code still
uses "expression" when it really means "definition". Tidy up.
The previous commit made qapi-code-gen.txt use "object" rather than
"dictionary". The code still uses "dictionary". Tidy up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-17-armbru@redhat.com>
For consistency with docs/devel/qapi-code-gen.txt.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-12-armbru@redhat.com>
Absent flat union branches default to the empty struct (since commit
800877bb16 "qapi: allow empty branches in flat unions"). But an
attempt to omit all of them is rejected with "Union 'FOO' has no
branches". Harmless oddity, but it's easy to avoid, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-11-armbru@redhat.com>
[Commit message typo fixed]
A union or alternate without branches makes no sense and doesn't work:
it can't be instantiated. A union or alternate with just one branch
works, but is degenerate. We accept the former, but reject the
latter. Weird. docs/devel/qapi-code-gen.txt doesn't mention the
difference. It claims an alternate definition is "is similar to a
simple union type".
Permit degenerate alternates to make them consistent with unions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-10-armbru@redhat.com>
We reject empty types with 'boxed': true. We don't really need that
to work, but making it work is actually simpler than rejecting it, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-9-armbru@redhat.com>
Since the previous commit restricted strings to printable ASCII,
\uXXXX's only use is obfuscation. Drop it.
This leaves \\, \/, \', and \". Since QAPI schema strings are all
names, and names are restricted to ASCII letters, digits, hyphen, and
underscore, none of them is useful.
The latter three have no test coverage. Drop them.
Keep \\ to avoid (more) gratuitous incompatibility with JSON.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-8-armbru@redhat.com>
RFC 8259 on string contents:
All Unicode characters may be placed within the quotation marks,
except for the characters that MUST be escaped: quotation mark,
reverse solidus, and the control characters (U+0000 through
U+001F).
The QAPI schema parser accepts both less and more than JSON: it
accepts only ASCII with \u (less), and accepts control characters
other than LF (new line) unescaped. How it treats unescaped non-ASCII
input differs between Python 2 and Python 3.
Make it accept strictly less: require printable ASCII. Drop support
for \b, \f, \n, \r, \t.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-7-armbru@redhat.com>
Invalid name 'not\\possible' is reported as 'not\possible'. Control
characters (quoted or not) are even more confusing. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-6-armbru@redhat.com>
Commands and events can define their argument type inline (default) or
by referring to another type ('boxed': true, since commit c818408e44
"qapi: Implement boxed types for commands/events", v2.7.0). The
unboxed inline definition is an (anonymous) struct type. The boxed
type may be a struct, union, or alternate type.
The latter is problematic: docs/interop/qemu-spec.txt requires the
value of the 'data' key to be a json-object, but any non-degenerate
alternate type has at least one branch that isn't.
Fortunately, we haven't made use of alternates in this context outside
tests/. Drop support for them.
QAPISchemaAlternateType.is_empty() is now unused. Drop it, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-4-armbru@redhat.com>
* Relaxed error code pattern on machine_m68k_nextcube.py
* Better naming and separation of tests in x86_cpu_model_versions.py
* New checks on guest side on linux_ssh_mips_malta.py
* Use of avocado.utils.ssh, and thus "/usr/bin/ssh" for SSH
interaction
-----BEGIN PGP SIGNATURE-----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=Xv0l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Improvements include:
* Relaxed error code pattern on machine_m68k_nextcube.py
* Better naming and separation of tests in x86_cpu_model_versions.py
* New checks on guest side on linux_ssh_mips_malta.py
* Use of avocado.utils.ssh, and thus "/usr/bin/ssh" for SSH
interaction
# gpg: Signature made Mon 23 Sep 2019 14:38:01 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: use avocado.utils.ssh for SSH interaction
tests/acceptance: Add new test cases in linux_ssh_mips_malta.py
tests/acceptance: Refactor and improve reporting in linux_ssh_mips_malta.py
Acceptance test x86_cpu_model_versions: split into smaller tests
Acceptance test x86_cpu_model_versions: fix mismatches between test and messages
Acceptance test x86_cpu_model_versions: shutdown VMs
Acceptance test machine_m68k_nextcube.py: relax the error code pattern
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
-----BEGIN PGP SIGNATURE-----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=lCyp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/ipmi-for-release-2019-09-20' into staging
ipmi: Some bug fixes and new interfaces
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
# gpg: Signature made Fri 20 Sep 2019 20:11:21 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/ipmi-for-release-2019-09-20:
pc: Add an SMB0 ACPI device to q35
ipmi: Fix SSIF ACPI handling to use the right CRS
acpi: Add i2c serial bus CRS handling
ipmi: Add an SMBus IPMI interface
ipmi: Add PCI IPMI interfaces
smbios:ipmi: Ignore IPMI devices with no fwinfo function
ipmi: Allow a size value to be passed for I/O space
ipmi: Split out BT-specific code from ISA BT code
ipmi: Split out KCS-specific code from ISA KCS code
ipmi: Add a UUID device property
qdev: Add a no default uuid property
tests:ipmi: Fix IPMI BT tests
ipmi: Generate an interrupt on watchdog pretimeout expiry
ipmi: Fix the get watchdog command
ipmi: Fix watchdog NMI handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add a test that especially verifies that no data will be touched
in case we cross page boundaries and one page access triggers a fault.
Before the fault-safe handling fixes, the test failes with:
TEST mvc on s390x
data modified during a fault
make[2]: *** [../Makefile.target:116: run-mvc] Error 1
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add the simple test based on the example from the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This replaces paramiko with avocado.utils.ssh module, which is based
on a (open)ssh binary, supposedly more ubiquitous.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190919225905.10829-1-crosa@redhat.com>
[Cleber: consolidated existing skipUnless from tests to setUp]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Add 15 new tests cases. They all rely on simple commands used for
detecting hardware configuration information.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1564760158-27536-3-git-send-email-aleksandar.markovic@rt-rk.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch restructures code organization around the test case
executions. At the same time, rather than outputing a cryptic message:
FAIL: True not found in [False],
the following will be reported too, if the command output does not meet
specified expectations:
'lspci -d 11ab:4620' output doesn't contain the word 'GT-64120'
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1564760158-27536-2-git-send-email-aleksandar.markovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The justifications being automatic destruction of the vm instances
when no longer needed and more compact test naming under a common
class.
Besides those, a smaller test makes the one and only assertion rather
obvious, which suggests that we could even get rid of the more verbose
(and manual) error messages (to be decided).
Naming of the tests tries to follow the following pattern:
test_($cpu_version)_($no_arch_capabitilies_set_or_unset)_($machine_version)
The presence of each naming component is optional, depending on
whether the test manually sets it or not.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-4-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This fixes a few mismatches between the test and the error messages
produced in case of failures.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-3-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This shuts down the VMs that won't be used any longer during the
remainder of the test.
It's debatable if the very last one should also be shutdown manually,
and my opinion is that it shouldn't because that's taken care by the
immediately following tearDown().
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-2-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of looking for a specific error, let's relax the pattern
because different errors have been seen (I'm consistenly getting 52)
and the real goal of this test is to validate the framebuffer
operation, and not to reproduce one specific error.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20190919161400.26399-1-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This is so I2C devices can be found in the ACPI namespace. Currently
that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself
to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable
of handling an SMBus device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The IPMI BT tests had a race condition, if it receive an IPMI command
to enable interrupt, it would write the message to enable interrupts
after it wrote the command response. So the test code could
receive the command response and issue the next command before the
device handled the interrupt enable command, and thus no interrupt.
So send the message to enable interrupt before the command response.
Also add some sleeps to give qemu time to handle responses, there was
no delay before, and it could result in an invalid timeout.
And re-enable the tests, as hopefully they are fixed now.
Note that I was unable to reproduce this even with the instructions
Peter gave me, but hopefully this fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
-----BEGIN PGP SIGNATURE-----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=9CXf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-09-19
# gpg: Signature made Thu 19 Sep 2019 17:24:04 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
BootLinuxSshTest: Only run the tests when explicitly requested
tests/acceptance: Specify arch for QueryCPUModelExpansion
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the Avocado framework does not distinct the time spent
downloading assets vs. the time spent running a test. With big
assets (like a full VM image) the tests likely fail.
This is a limitation known by the Avocado team.
Until this issue get fixed, do not run this tests automatically.
Tests can still be run setting the AVOCADO_TIMEOUT_EXPECTED
environment variable.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918122748.2144-1-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At the moment this test runs on whatever the host arch is. But it looks
for 'unavailable-features' which is an x86 specific cpu property. Tag it
to always use qemu-system-x86_64.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918070654.19356-1-david@gibson.dropbear.id.au>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
qemu-io now prefixes its error and warnings with "qemu-io:".
36b9986b08 fixed a lot of iotests output but forget about
026.out.nocache. Fix it too.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190816153015.447957-2-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The check script is already printing out which iotest is currently
running, so printing out the name of the check-block.sh shell script
looks superfluous here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190906113534.10907-1-thuth@redhat.com
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When running "make check -j8" or something similar, the iotests are
running in parallel with the other tests. So when they are printing
out "Passed all xx tests" or a similar status message at the end,
it might not be quite clear that this message belongs to the iotests,
since the output might be mixed with the other tests. Thus change the
word "tests" here to "iotests" instead to avoid confusion.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190906113920.11271-1-thuth@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The CharSocketServerTestConfig and CharSocketClientTestConfig
objects escape after they are passed to g_test_add_data_func,
but they cease existing after the scope that defines them is
closed. Make them static to fix this issue.
Fixes: e7b6ba4186
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
-----BEGIN PGP SIGNATURE-----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=W+5Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190912a' into staging
Migration pull 2019-09-12
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
# gpg: Signature made Thu 12 Sep 2019 14:48:28 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190912a:
migration: fix one typo in comment of function migration_total_bytes()
migration/qemu-file: fix potential buf waste for extra buf_index adjustment
migration/qemu-file: remove check on writev_buffer in qemu_put_compression_data
migration: Fix postcopy bw for recovery
tests/migration: Add a test for validate-uuid capability
tests/libqtest: Allow setting expected exit status
migration: Add validate-uuid capability
qemu-file: Rework old qemu_fflush comment
migration: register_savevm_live doesn't need dev
hw/net/vmxnet3: Fix leftover unregister_savevm
migration: cleanup check on ops in savevm.handlers iterations
migration: multifd_send_thread always post p->sem_sync when error happen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- qcow2: Allow overwriting multiple compressed clusters at once for
better performance
- nfs: add support for nfs_umount
- file-posix: write_zeroes fixes
- qemu-io, blockdev-create, pr-manager: Fix crashes and memory leaks
- qcow2: Fix the calculation of the maximum L2 cache size
- vpc: Fix return code for vpc_co_create()
- blockjob: Code cleanup
- iotests improvements (e.g. for use with valgrind)
-----BEGIN PGP SIGNATURE-----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=yYOk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Allow overwriting multiple compressed clusters at once for
better performance
- nfs: add support for nfs_umount
- file-posix: write_zeroes fixes
- qemu-io, blockdev-create, pr-manager: Fix crashes and memory leaks
- qcow2: Fix the calculation of the maximum L2 cache size
- vpc: Fix return code for vpc_co_create()
- blockjob: Code cleanup
- iotests improvements (e.g. for use with valgrind)
# gpg: Signature made Fri 13 Sep 2019 11:19:19 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
qcow2: Stop overwriting compressed clusters one by one
block/create: Do not abort if a block driver is not available
qemu-io: Don't leak pattern file in error path
iotests: extend sleeping time under Valgrind
iotests: extended timeout under Valgrind
iotests: Valgrind fails with nonexistent directory
iotests: Add casenotrun report to bash tests
iotests: exclude killed processes from running under Valgrind
iotests: allow Valgrind checking all QEMU processes
block/nfs: add support for nfs_umount
block/nfs: tear down aio before nfs_close
iotests: skip 232 when run tests as root
iotests: Test blockdev-create for vpc
iotests: Restrict nbd Python tests to nbd
iotests: Restrict file Python tests to file
iotests: Add supported protocols to execute_test()
vpc: Return 0 from vpc_co_create() on success
file-posix: Fix has_write_zeroes after NO_FALLBACK
pr-manager: Fix invalid g_free() crash bug
iotests: Test reverse sub-cluster qcow2 writes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To synchronize the time when QEMU is running longer under the Valgrind,
increase the sleeping time in the test 247.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is
to be increased in the test cases 028, 183 and 192 when running under
the Valgrind.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind uses the exported variable TMPDIR and fails if the
directory does not exist. Let us exclude such a test case from
being run under the Valgrind and notify the user of it.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new function _casenotrun() is to be invoked if a test case cannot
be run for some reason. The user will be notified by a message passed
to the function. It is the caller's responsibility to make skipped a
particular test.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind tool fails to manage its termination in multi-threaded
processes when they raise the signal SIGKILL. The bug has been reported
to the Valgrind maintainers and was registered as the bug #409141:
https://bugs.kde.org/show_bug.cgi?id=409141
Let's exclude such test cases from running under the Valgrind until a
new version with the bug fix is released because checking for the
memory issues is covered by other test cases.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the '-valgrind' option, let all the QEMU processes be run under
the Valgrind tool. The Valgrind own parameters may be set with its
environment variable VALGRIND_OPTS, e.g.
$ VALGRIND_OPTS="--leak-check=yes" ./check -valgrind <test#>
or they may be listed in the Valgrind checked file ./.valgrindrc or
~/.valgrindrc like
--memcheck:leak-check=no
--memcheck:track-origins=yes
To exclude a specific process from running under the Valgrind, the
corresponding environment variable VALGRIND_QEMU_<name> is to be set
to the empty string:
$ VALGRIND_QEMU_IO= ./check -valgrind <test#>
When QEMU-IO process is being killed, the shell report refers to the
text of the command in _qemu_io_wrapper(), which was modified with this
patch. So, the benchmark output for the tests 039, 061 and 137 is to be
changed also.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-4-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add qtest_set_expected_status function to set expected exit status of
child process. By default expected exit status is 0.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-3-yury-kotov@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The ordering of events that are emitted during the rmdir
test have changed with kernel >= 5.3. Semantically both
new & old orderings are correct, so we must be able to
cope with either.
To cope with this, when we see an unexpected event, we
push it back onto the queue and look and the subsequent
event to see if that matches instead.
Tested-by: Peter Xu <peterx@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from the "dl.fedoraproject.org" URL,
and keeps them in "archives.fedoraproject.org". As an added note,
that test uses a Fedora 28 image, because of the specific Linux kernel
version requirements of the test.
For the sake of stability, let's use URLs from the archived and
supposedely ever stable URLs. The good news is that the currently
supported versions are also hosted on the later. This change limits
itself to change the URLs, while keeping the fetched files the same
(as can be evidenced by the unchanged hashes).
Documentation and the "vm tests" fedora definition were also updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Yash Mankad <ymankad@redhat.com>
Message-Id: <20190904005218.12536-1-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently this stops the mega:
make docker-test-build
from working. Once the source is patched to deal with the case this
workaround can be removed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Debian QEMU packages require a bunch of cross compilers for
building firmware which aren't available on all host architectures.
Using --arch-only skips this particular requirement and allows us to
install just the dependencies we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.
This fixes:
$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --
Fixes: 2b0c4fa13f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Another image that can't be used directly to build QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This should have been marked when the docker recipe was added to
prevent it being used for cross compiling QEMU. Sort the
DEBIAN_PARTIAL_IMAGE list while we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Jessie has entered LTS the powerpc architecture has been dropped
so we can no longer build the image from scratch. However we can use
the snapshot archive to build the last working version.
This now only lives on an example of setting up a user-cross image as
at least on x86-64 we can use the Buster packaged cross compiler for
building test images.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we are not currently using it we might as well keep the image
for later usage. So:
- update to a more recent snapshot
- clean up verbiage in commentary
- remove duplicate shell from a merge failure
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need to add additional packages to the base images to be able to
build QEMU so lets avoid building with it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
You can assume the failures most people are interested in are the
cross-compile failures that are specific to the cross compile target.
Set DEF_TARGET_LIST based on what we use for shippable, the user can
always override by calling with TARGET_LIST set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We might as well not repeat ourselves. At the same time allow it to be
overridden which we will use later from docker targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This hides the new build artefacts from the re-organised TCG tests when
you are doing an in-source build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.
Rename Makefile to Makefile.target, since it is not a toplevel
makefile.
Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include. Tests are now placed in
tests/tcg/$(TARGET).
Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64. Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For i386 specifically, this allows using the host GCC
to compile the i386 tests. But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Max Reitz