Commit Graph

1820 Commits

Author SHA1 Message Date
Peter Maydell 9de65783e1 Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
 Return host address from probe_write / probe_access.
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
 gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
 CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
 foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
 VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
 RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
 xM2HEw==
 =bLLU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging

Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.

# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190903: (36 commits)
  tcg: Factor out probe_write() logic into probe_access()
  tcg: Make probe_write() return a pointer to the host page
  s390x/tcg: Pass a size to probe_write() in do_csst()
  hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
  mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
  tcg: Enforce single page access in probe_write()
  tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
  s390x/tcg: Fix length calculation in probe_write_access()
  s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
  tcg: Check for watchpoints in probe_write()
  cputlb: Handle watchpoints via TLB_WATCHPOINT
  cputlb: Remove double-alignment in store_helper
  cputlb: Fix size operand for tlb_fill on unaligned store
  exec: Factor out cpu_watchpoint_address_matches
  cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
  exec: Factor out core logic of check_watchpoint()
  exec: Move user-only watchpoint stubs inline
  target/sparc: sun4u Invert Endian TTE bit
  target/sparc: Add TLB entry with attributes
  cputlb: Byte swap memory transaction attribute
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04 16:29:18 +01:00
Tony Nguyen 14776ab5a1 tcg: TCGMemOp is now accelerator independent MemOp
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.

Target dependant attributes are conditionalized upon NEED_CPU_H.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:38 -07:00
Emilio G. Cota 2bc89637b7 tcg/README: fix typo s/afterwise/afterwards/
Afterwise is "wise after the fact", as in "hindsight".
Here we meant "afterwards" (as in "subsequently"). Fix it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03 16:20:35 +01:00
tony.nguyen@bt.com 52bf9771fd configure: Define target access alignment in configure
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.

Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-20 17:26:19 +02:00
Markus Armbruster db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 6a0acfff99 Clean up inclusion of exec/cpu-common.h
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t.  Fix that.  Drop a few superfluous inclusions elsewhere.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Richard Henderson 1789d4274b tcg/aarch64: Fix output of extract2 opcodes
This patch fixes two problems:
(1) The inputs to the EXTR insn were reversed,
(2) The input constraints use rZ, which means that we need to use
    the REG0 macro in order to supply XZR for a constant 0 input.

Fixes: 464c2969d5
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-14 12:19:00 +02:00
Richard Henderson 80f4d7c3ae tcg: Fix constant folding of INDEX_op_extract2_i32
On a 64-bit host, discard any replications of the 32-bit
sign bit when performing the shift and merge.

Fixes: https://bugs.launchpad.net/bugs/1834496
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-14 12:19:00 +02:00
Richard Henderson 11978f6f58 tcg: Fix expansion of INDEX_op_not_vec
This operation can always be emitted, even if we need to
fall back to xor.  Adjust the assertions to match.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-09 08:26:11 +02:00
Alistair Francis 7ab7e9c7c7 tcg/riscv: Fix RISC-VH host build failure
Commit 269bd5d8 "cpu: Move the softmmu tlb to CPUNegativeOffsetState'
broke the RISC-V host build as there are two variables that are used but
not defined.

This patch renames the undefined variables mask_off and table_off to the
existing (but unused) mask_ofs and table_ofs variables.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <79729cc88ca509e08b5c4aa0aa8a52847af70c0f.1561039316.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-09 08:26:11 +02:00
Like Xu 5cc8767d05 general: Replace global smp variables with smp machine properties
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.

A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:07:36 -03:00
Markus Armbruster f91005e195 Supply missing header guards
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12 13:20:21 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Richard Henderson 43b3952dea tcg/arm: Remove mostly unreachable tlb special case
There was nothing armv7 specific about the bic+cmp sequence, however
looking at the set of guests more closely shows that the 8-bit immediate
operand for the bic can only be satisfied with one guest in tree:
baseline m-profile -- 10-bit pages with aligned 4-byte memory ops.
Therefore it does not seem useful to keep this path.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 057b6e370b tcg/arm: Use LDRD to load tlb mask+table
This changes the code generation for the tlb from e.g.

	ldr      ip, [r6, #-0x10]
	ldr      r2, [r6, #-0xc]
	and      ip, ip, r4, lsr #8
	ldrd     r0, r1, [r2, ip]!
	ldr      r2, [r2, #0x18]

to

	ldrd     r0, r1, [r6, #-0x10]
	and      r0, r0, r4, lsr #8
	ldrd     r2, r3, [r1, r0]!
	ldr      r1, [r1, #0x18]

for armv7 hosts.  Rearranging the register allocation in
order to avoid overlap between the two ldrd pairs causes
the patch to be larger than it ordinarily would be.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 65b23204d6 tcg/aarch64: Use LDP to load tlb mask+table
This changes the code generation for the tlb from e.g.

	ldur     x0, [x19, #0xffffffffffffffe0]
	ldur     x1, [x19, #0xffffffffffffffe8]
	and      x0, x0, x20, lsr #8
	add      x1, x1, x0
	ldr      x0, [x1]
	ldr      x1, [x1, #0x18]

to

	ldp      x0, x1, [x19, #-0x20]
	and      x0, x0, x20, lsr #8
	add      x1, x1, x0
	ldr      x0, [x1]
	ldr      x1, [x1, #0x18]

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 269bd5d8f6 cpu: Move the softmmu tlb to CPUNegativeOffsetState
We have for some time had code within the tcg backends to
handle large positive offsets from env.  This move makes
sure that need not happen.  Indeed, we are able to assert
at build time that simple offsets suffice for all hosts.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson a40ec84ee2 tcg: Create struct CPUTLB
Move all softmmu tlb data into this structure.  Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson 11e2bfef79 tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store
This instruction raises #GP, aka SIGSEGV, if the effective address
is not aligned to 16-bytes.

We have assertions in tcg-op-gvec.c that the offset from ENV is
aligned, for vector types <= V128.  But the offset itself does not
validate that the final pointer is aligned -- one must also remember
to use the QEMU_ALIGNED() attribute on the vector member within ENV.

PowerPC Altivec has vector load/store instructions that silently
discard the low 4 bits of the address, making alignment mistakes
difficult to discover.  Aid that by making the most popular host
visibly signal the error.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 9e27f58b99 tcg/aarch64: Allow immediates for vector ORR and BIC
The allows immediates to be used for ORR and BIC,
as well as the trivial inversions, ORC and AND.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 02f3a5b474 tcg/aarch64: Build vector immediates with two insns
Use MOVI+ORR or MVNI+BIC in order to build some vector constants,
as opposed to dropping them to the constant pool.  This includes
all 16-bit constants and a similar set of 32-bit constants.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 7e308e003e tcg/aarch64: Use MVNI in tcg_out_dupi_vec
The compliment of a subset of immediates can be computed
with a single instruction.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 984fdcee34 tcg/aarch64: Split up is_fimm
There are several sub-classes of vector immediate, and only MOVI
can use them all.  This will enable usage of MVNI and ORRI, which
use progressively fewer sub-classes.

This patch adds no new functionality, merely splits the function
and moves part of the logic into tcg_out_dupi_vec.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson a9e434a5dc tcg/aarch64: Support vector bitwise select value
The instruction set has 3 insns that perform the same operation,
only varying in which operand must overlap the destination.  We
can represent the operation without overlap and choose based on
the operands seen.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson ebcfb91abe tcg/i386: Use umin/umax in expanding unsigned compare
Using umin(a, b) == a as an expansion for TCG_COND_LEU is a
better alternative to (a - INT_MIN) <= (b - INT_MIN).

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 3ec3538a45 tcg/i386: Remove expansion for missing minmax
This is now handled by code within tcg-op-vec.c.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 904c5e1967 tcg/i386: Support vector comparison select value
We already had backend support for this feature.  Expand the new
cmpsel opcode using vpblendb.  The combination allows us to avoid
an extra NOT for some comparison codes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 25c012b400 tcg: Add TCG_OPF_NOT_PRESENT if TCG_TARGET_HAS_foo is negative
If INDEX_op_foo is always expanded by tcg_expand_vec_op, then
there may be no reasonable set of constraints to return from
tcg_target_op_def for that opcode.

Let TCG_TARGET_HAS_foo be specified as -1 in that case.  Thus a
boolean test for TCG_TARGET_HAS_foo is true, but we will not
assert within process_op_defs when no constraints are specified.

Compare this with tcg_can_emit_vec_op, which already uses this
tri-state indication.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 72b4c792c7 tcg: Expand vector minmax using cmp+cmpsel
Provide a generic fallback for the min/max operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 17f79944eb tcg: Introduce do_op3_nofail for vector expansion
This makes do_op3 match do_op2 in allowing for failure,
and thus fall back expansions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson f75da2988e tcg: Add support for vector compare select
Perform a per-element conditional move.  This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 38dc12947e tcg: Add support for vector bitwise select
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units.  Include gvec expanders.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 532ba368a1 tcg: Fix missing checks and clears in tcg_gen_gvec_dup_mem
The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align.  The path through MO_128 was also
missing the expand_clr.  This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.

Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson 7b60ef3264 tcg/i386: Fix dupi/dupm for avx1 and 32-bit hosts
The VBROADCASTSD instruction only allows %ymm registers as destination.
Rather than forcing VEX.L and writing to the entire 256-bit register,
revert to using MOVDDUP with an %xmm register.  This is sufficient for
an avx1 host since we do not support TCG_TYPE_V256 for that case.

Also fix the 32-bit avx2, which should have used VPBROADCASTW.

Fixes: 1e262b49b5
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22 15:09:43 -04:00
Richard Henderson a7b6d286cf tcg/aarch64: Do not advertise minmax for MO_64
The min/max instructions are not available for 64-bit elements.

Fixes: 93f332a503
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson a456394ae5 tcg/aarch64: Support vector absolute value
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson 18f9b65f1a tcg/i386: Support vector absolute value
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson bcefc90208 tcg: Add support for vector absolute value
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson ff1f11f7f8 tcg: Add support for integer absolute value
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson 0a8d7a3bf5 tcg/i386: Support vector scalar shift opcodes
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson b4578cd91c tcg: Add gvec expanders for vector shift by scalar
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use a private structure for do_gvec_shifts.
2019-05-13 22:52:08 +00:00
Richard Henderson 79525dfd08 tcg/aarch64: Support vector variable shift opcodes
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson a2ce146a06 tcg/i386: Support vector variable shift opcodes
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson 5ee5c14cac tcg: Add gvec expanders for variable shift
The gvec expanders perform a modulo on the shift count.  If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson 37ee55a081 tcg: Add INDEX_op_dupm_vec
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first.  This is especially important
if integer/vector register moves do not exist.

Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:

  VECE == 32/64:
    Load the value into a vector register, then dup.
    Both of these must work.

  VECE == 8/16:
    If the value happens to be at an offset such that an aligned
    load would place the desired value in the least significant
    end of the register, go ahead and load w/garbage in high bits.

    Load the value w/INDEX_op_ld{8,16}_i32.
    Attempt a move directly to vector reg, which may fail.
    Store the value into the backing store for OTS.
    Load the value into the vector reg w/TCG_TYPE_I32, which must work.
    Duplicate from the vector reg into itself, which must work.

All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:52:08 +00:00
Richard Henderson f23e5e15ed tcg/aarch64: Implement tcg_out_dupm_vec
The LD1R instruction does all the work.  Note that the only
useful addressing mode is a base register with no offset.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 22:50:35 +00:00
Richard Henderson 1e262b49b5 tcg/i386: Implement tcg_out_dupm_vec
At the same time, improve tcg_out_dupi_vec wrt broadcast
from the constant pool.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson d6ecb4a978 tcg: Add tcg_out_dupm_vec to the backend interface
Currently stubbed out in all backends that support vectors.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson bab1671f0f tcg: Manually expand INDEX_op_dup_vec
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.
2019-05-13 14:44:03 -07:00
Richard Henderson e7632cfa8b tcg: Promote tcg_out_{dup,dupi}_vec to backend interface
The i386 backend already has these functions, and the aarch64 backend
could easily split out one.  Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.

Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00