Commit 6e9989034b introduced a new qtest
test case but misspelled gcov, leading to no coverage analysis. Fix it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Perform input tests on random data.
Improvement to code coverage for qapi/string-input-visitor.c
is about 3 percentage points.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I had missed the introduction of the gcov-files-* variables.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
hbitmap_iter_init causes an out-of-bounds access when the "first"
argument is or greater than or equal to the size of the bitmap.
Forbid this with an assertion, and remove the failing testcase.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_poll() must return true if any work is still pending, even if it
didn't make progress, so that bdrv_drain_all() doesn't stop waiting too
early. The possibility of stopping early occasionally lead to a failed
assertion in bdrv_drain_all(), when some in-flight request was missed
and the function didn't really drain all requests.
In order to make that change, the return value as specified in the
function comment must change for blocking = false; fortunately, the
return value of blocking = false callers is only used in test cases, so
this change shouldn't cause any trouble.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Exercise all four commands of the TMP105, testing for an issue in the
I2C TX path.
The test case uses the N800's OMAP I2C and is the first for ARM.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a simple I2C API and a driver implementation for omap_i2c.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to eliminate calls to qemu_aio_flush() since the function is
being removed. Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.
Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There has been confusion between various aio wait and flush functions.
It's time to get rid of qemu_aio_flush() but in the aio test cases we
really do want this low-level functionality.
Therefore declare a local wait_for_aio() helper for the test cases.
Drop the aio_flush() test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:
+- cmos_io_port_write
+-- check_update_timer
+---- get_next_alarm
+------ rtc_update_time
In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The cancellation test is failing on the buildbots. While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test. Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/build-urgent:
Makefile: Add missing dependency (fix parallel builds)
tests: link in stubs
libcacard: link in stubs
libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ST0 shouldn't include 0x20 (FD_SR0_SEEK) after READ ID.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Do not always set FD_SR0_SEEK, as callers already set it if needed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new options are tested with blkdebug on both the source and the
target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the century byte in the RTC emulation, and test that it works.
This leads to some annoying compatibility code because we need to treat
a value of 2000 for the base_year property as "use the century byte
properly" (which would be a value of 0).
The century byte will now be always-zero, rather than always-20,
for the MIPS Magnum machine whose base_year is 1980. Commit 42fc73a
(Support epoch of 1980 in RTC emulation for MIPS Magnum, 2009-01-24)
correctly said:
With an epoch of 1980 and a year of 2009, one could argue that [the
century byte] should hold either 0, 1, 19 or 20. NT 3.50 on MIPS
does not read the century byte.
so I picked the simplest and most sensible implementation which is to
return 0 for 1980-2079, 1 for 2080-2179 and so on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When setting a date in 1980, Linux is actually disregarding the century
byte and setting the year to 2080. This causes a year-2038 overflow
in mktimegm. Fix this by doing the days-to-seconds computation in
64-bit math.
Reported-by: Lucas Meneghel Rodrigues <lookkas@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite difficult to debug qtest test cases without extra wrapper
scripts for QEMU or similar. This patch adds a simple environment
variable-based trigger that sends a STOP signal to the QEMU instance
under test, before attempting to connect to its QMP session.
This will block execution of the testcase and give time to attach a
debugger to the stopped QEMU process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test case checks that streaming completes successfully when the
backing file is smaller than the image file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.
To reproduce the bug, run:
$ make check # succeeds
$ echo B0RKED > hw/mc146818rtc_regs.h
$ make check # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't overwrite / leak previously set errors.
Make traversal cope with missing mandatory sub-structs.
Don't try to end a container that could not be started.
v1->v2:
- unchanged
v2->v3:
- instead of examining, assert that we never overwrite errors with
error_set()
- allow visitors to set a NULL struct pointer successfully, so traversal
of incomplete objects can continue
- check for a NULL "obj" before accessing "(*obj)->has_XXX" (this is not a
typo, "obj != NULL" implies "*obj != NULL" here)
- fix start_struct / end_struct balance for unions as well
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each test litters /tmp with several files: a pid file and two
sockets. Tidy up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling sense interrupt status while there is no interrupt should
return invalid command (0x80).
Read command should always returns in st0 seek_end bit set to 1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After rewrite DSKCHG bit handling the test has to be updated. Now
is needed to seek to different track to clear DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
From Markus:
Makes "make check" hang:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 gtester -k --verbose -m=quick tests/crash-test tests/rtc-test
TEST: tests/crash-test... (pid=972)
qemu-system-x86_64: Device needs media, but drive is empty
[Nothing happens, wait a while, then hit ^C]
make: *** [check-qtest-x86_64] Interrupt
This was due to the fact that we weren't checked for errors when
reading from the QMP socket. This patch adds appropriate error
checking.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
accept() expects address_len to point to the length of the sockaddr on
input. Initialize it accordingly.
Resolves an assertion due to EFAULT on illumos.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This new test validates the autoclear feature bit behavior. When QEMU
opens a qcow2v3 image file with an unknown autoclear feature bit the bit
should be cleared in the image file header.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new command sets feature bits in the image file header:
qcow2.py set-feature-bit incompatible|compatible|autoclear <bit>
The bit number must be in the range [0, 64).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you try to read from a floppy drive without a media, you should get
an abnormal termination error.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one is a bit more interesting. The COW operation isn't performed
completely synchronously, and therefore dependencies must be handled
correctly when multiple requests write to the same unallocated cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we're still missing these very basic tests for backing file
handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This way, they will not execute any VM code at all. However, right now
the cancellation test is "relying" on being slowed down by TCG executing
BIOS code. So, change the timeouts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TestStreamStop test case is racy; if the job completes before we can
cancel it, it fails. If we remove the sleep the job will be canceled
before it has even started, and the test succeeds but it is also not
testing anything interesting.
But if the image is left sparse, then the job has really nothing to do.
For qcow2 it will read one L2-table, for raw it will issue a bunch of
ioctls. This also falls under "not testing anything interesting", and
this may be happening right now (depending on the filesystem) since the
file protocol got an is_allocated method.
Filling the test image with data ensures that the test covers the
intended case. It also slows down the test, which will be particularly
important after the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it much more understandable, add a missing
iov_cnt argument (number of iovs in the iov), and
add comments to it.
The new implementation has been extensively tested
by splitting a large buffer into many small
randomly-sized chunks, sending it over socket to
another, slow process and verifying the receiving
data is the same.
Also add a unit test for iov_send_recv(), sending/
receiving data between two processes over a socketpair
using random vectors and random sizes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* afaerber-or/qom-next-1:
target-i386: Use uint32 visitor for [x]level properties
qdev: Remove PropertyInfo range checking
qdev: Switch property accessors to fixed-width visitor interfaces
qdev: Use int32_t container for devfn property
qapi: Add String visitor coverage to serialization unit tests
qapi: String visitor, use %f representation for floats
qapi: Unit tests for visitor-based serialization
qapi: Add Visitor interfaces for uint*_t and int*_t
Currently string-output-visitor formats floats as %g, which is nice in
that trailing 0's are automatically truncated, but otherwise this causes
some issues:
- it uses 6 significant figures instead of 6 decimal places, which
means something like 155777.5 (which even has an exact floating point
representation) will be rounded to 155778 when converted to a string.
- output will be presented in scientific notation when the normalized
form requires a 10^x multiplier. Not a huge deal, but arguably less
readable for command-line arguments.
- due to using scientific notation for numbers requiring more than 6
significant figures, instead of hard-defined decimal places, it
fails a lot of the test-visitor-serialization unit tests for floats.
Instead, let's just use %f, which is what the QJSON and the QMP visitors
use.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently we test our visitors individually, and seperately for input
vs. output. This is useful for validating internal representations
against the native C types and vice-versa, and other visitor-specific
testing, but it doesn't cover the potential use-case of using visitor
pairs for serialization/deserialization very well, and makes it
hard to easily extend the coverage for different C types / boundary
conditions.
To cover that we add a set of unit tests that takes a number of native C
values, passes them into an output visitor, extracts the values with an
input visitor, then compares the result to the original.
Plugging in new visitors to the test harness only requires a user to
implement the SerializeOps interface and add it to a list.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes implementations of all iov_*
functions, completing the previous step.
All iov_* functions now ensure that this offset
argument is within the iovec (using assertion),
but lets to specify `bytes' value larger than
actual length of the iovec - in this case they
stops at the actual end of iovec. It is also
suggested to use convinient `-1' value as `bytes'
to mean just this -- "up to the end".
There's one very minor semantic change here: new
requiriment is that `offset' points to inside of
iovec. This is checked just at the end of functions
(assert()), it does not actually need to be enforced,
but using any of these functions with offset pointing
past the end of iovec is wrong anyway.
Note: the new code in iov.c uses arithmetic with
void pointers. I thought this is not supported
everywhere and is a GCC extension (indeed, the C
standard does not define void arithmetic). However,
the original code already use void arith in
iov_from_buf() function:
(memcpy(..., buf + buf_off,...)
which apparently works well so far (it is this
way in qemu 1.0). So I left it this way and used
it in other places.
While at it, add a unit-test file test-iov.c,
to check various corner cases with iov_from_buf(),
iov_to_buf() and iov_memset().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As default a guest has always one floppy drive so 0x10 byte in CMOS
has to have 0x40 value. Higher 4 bits means that the first floppy drive
is 1.44 Mb 3"5 drive and lower 4 bits means the second drive is not present.
After the guest starts DSKCHG bit in DIR register should be set. If there
is no media in drive, this bit should be set all the time.
Because we start the guest without media in drive, we have to swap
'eject' and 'change' in 'test_media_change'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 93e9eb6808 added fdc-test,
but accidentally removed rtc-test because check-qtest-i386-y was
not enhanced but set twice.
This patch adds rtc-test again (and sorts both tests alphabetically).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test on sectors not allocated can fail if the L1/L2 tables are
not on disk yet. Allow tests to shutdown the VM early.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A trailing space is left when qemu-img has no arguments, for example if
-nocache is not used. This becomes an empty argument after split()
and causes qemu-io to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case manages to let qcow2 abort because its cache is used up
and it can't find free cache entries for new requests any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed. The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later. If the parameter has an invalid
value we expect to get an error and the job is not created.
It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
After adding GCC_FMT_ATTR to qtest_sendf, more format errors are reported
by the compiler. These are fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use PRIx64 to print 64 bit values to avoid truncation
on 32 bit hosts.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (38 commits)
qemu-iotests: Fix test 031 for qcow2 v3 support
qemu-iotests: Add -o and make v3 the default for qcow2
qcow2: Zero write support
qemu-iotests: Test backing file COW with zero clusters
qemu-iotests: add a simple test for write_zeroes
qcow2: Support for feature table header extension
qcow2: Support reading zero clusters
qcow2: Version 3 images
qcow2: Ignore reserved bits in check_refcounts
qcow2: Ignore reserved bits in refcount table entries
qcow2: Simplify count_cow_clusters
qcow2: Refactor qcow2_free_any_clusters
qcow2: Ignore reserved bits in L1/L2 entries
qcow2: Fail write_compressed when overwriting data
qcow2: Ignore reserved bits in count_contiguous_clusters()
qcow2: Ignore reserved bits in get_cluster_offset
qcow2: Save disk size in snapshot header
Specification for qcow2 version 3
qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at()
iotests: Resolve test failures caused by hostname
...
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add simple m48t59 qtests, enable test only for Sparc32
and Sparc64. On PPC, the device is behind PCI bus.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qcow2.py must be updated to work with version 3 images at all, the
output has changed since the feature table extension has been added, and
version 2 and version 3 images can't possibly have the same test output.
Change the test case to completely ignore IMGOPTS and run the test for
both compat=1.1 and compat=0.10 regardless of the ./check command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new autotests in tests/ generate a number of files, both
executable and source, which are not caught by the existing .gitignore
files. This patch adds a new .gitignore in tests/ which covers these.
[Changed 'rtc-test' to '*-test' so future tests do not need to be added
to .gitignore on a case-by-case basis. Stefan]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
`hostname -s` may output an errror:
hostname: Name or service not known
This causes all tests to fail for `make check-block`.
Suppress such error messages, letting the tests succeed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According comment, we should not read again, we will write.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BlockDriverState is closed/freed without draining the AIO
requests first, the request coroutines may work on invalid data and file
descriptors or have some dangling pointers that cause segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The special target should not be needed anymore, and caused (perhaps
due to a Make bug) a failure with "make -j2". In any case, the
main makefile is a better place for such special targets rather
than an included makefile.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu-io requires options first, then fixed parameters.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The immportant thing here is that header extensions don't get silently
dropped when the header is rewritten, e.g. during a rebase.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a tool that is meant to inspect and edit qcow2 files in a
low-level way, that wouldn't be possible with qemu-img/io, for example
by adding yet unknown extensions or flags. This way we can test whether
qemu deals properly with future backwards compatible extensions.
For now, let's start with the image header and header extensions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid this warning on OpenBSD:
CC tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While QMP in general is designed so that it is possible to ignore
unknown arguments, in the case of the QMP server it is better to
reject them to detect bad clients. In fact, we're already doing
this at the top level in the argument checker. To extend this to
complex structures, add a mode to the input visitor where it checks
for unvisited keys and raises an error if it finds one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
All the deps are here but the test was never added to the list of tests
for make check
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This was added by mistake a while back.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This creates a new test group 'quick' for some test case that take at
most a couple of seconds each, so that the group can be run during a
quick 'make check'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-iotests supports the -nocache option which makes the tests run with
cache=none. For blkdebug tests with qcow2 this means that we may see
test results that differ from cache=writethrough. This patch makes the
diff a bit smaller and therefore easier to review.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This one makes it possible to run qemu-iotests on a Windows build using Wine
and get somewhat meaningful results.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a test suite for the image streaming feature. It
exercises the 'block_stream', 'block_job_cancel', 'block_job_set_speed',
and 'query-block-jobs' QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block layer tests that involve QMP commands rather than qemu-img or
qemu-io are not well-suited for shell scripting. This patch adds a
Python module which allows tests to be written in Python instead.
The basic API is:
VM - class for launching and interacting with a VM
QMPTestCase - abstract base class for tests that use QMP
qemu_img() - wrapper function for invoking qemu-img
qemu_io() - wrapper function for invoking qemu-io
imgfmt - the image format under test (e.g. qcow2, qed)
test_dir - scratch directory path for temporary files
main() - entry point for running tests
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-iotests may need to create large image files it is possible
to specify the test directory. The TEST_DIR variable needs to be
exported so non-bash tests can make use of it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we might want to test arbitrary qemu, qemu-img and
qemu-io paths, allow users to specify environment variable
values for QEMU_PROG, QEMU_IMG_PROG and QEMU_IO_PROG so
the testsuite will use those values rather than find them
on PATH. Obviously, if such env variables are not set
prior to script execution, normal detection mechanism
takes place.
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Print the paths of the programs under test
(qemu, qemu-img and qemu-io).
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test loading internal snapshots where the L1 table of the snapshot
is smaller than the current L1 table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Until recently, qemu-img create displayed cluster_size=0 for the default
cluster size. It is changed to display the real cluster size now, which results
in the cluster size not being filtered out any more.
If the cluster size is specified explicitly in CLUSTER_SIZE, keep the output,
and if using the default, filter it out. This mostly restores the old behaviour
of the test cases; test 015 must be fixed to use CLUSTER_SIZE instead of using
extra_img_options for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
QED now supports the truncate (aka resize) operation for growing images.
Update test 025 so it runs for QED.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
rbd implements bdrv_truncate, so test 025 will work.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
016 writes past EOF which isn't support by most protocols, so limit
it to file and sheepdog, which explicitly support it.
Pointed out by Josh Durgin <josh.durgin@dreamhost.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The io_pattern style functions have the following loop:
for i in `seq 1 $count`; do
echo ... $(( start + i * step )) ...
done
Offsets are 1-based so start=1024, step=512, count=4 yields:
1536, 2048, 2560, 3072
Normally we expect:
1024, 1536, 2048, 2560
Most tests ignore this detail, which means that they perform I/O to a
slightly different range than expected by the test author.
Later on things got less innocent and tests started trying to compensate
for the 1-based indexing. This included negative start values in test
024 and my own attempt with count-1 in test 028!
The end result is that tests that use io_pattern are hard to reason
about and don't work the way you'd expect. It's time to clean this mess
up.
This patch switches io_pattern to 0-based offsets. This requires
adjusting the golden outputs since I/O ranges are now shifted and output
differs.
Verifying these output diffs is easy, however. Each diff hunk moves one
I/O from beyond the end of the pattern range to the beginning.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test 019 can be run with qcow2 and qed image formats. Replace the
specific image format value with "IMGFMT" so the golden output does not
hardcode qcow2 or qed.
This patch also includes a typo fix for "occurrences".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Andreas Färber