Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent KVM patch adds IA32_FEATURE_CONTROL support. QEMU needs
to clear this MSR when reset vCPU and keep the value of it when
migration. This patch add this feature.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
# By Michael R. Hines (8) and others
# Via Juan Quintela
* quintela/migration.next:
migration: add autoconvergence documentation
Fix real mode guest segments dpl value in savevm
Fix real mode guest migration
rdma: account for the time spent in MIG_STATE_SETUP through QMP
rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition
rdma: allow state transitions between other states besides ACTIVE
rdma: send pc.ram
rdma: core logic
rdma: introduce ram_handle_compressed()
rdma: bugfix: ram_control_save_page()
rdma: update documentation to reflect new unpin support
Message-id: 1374590725-14144-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Avoid TYPE_* in VMStateDescription name
* Replace some DO_UPCAST()s and FROM_SYSBUS()s with QOM casts
* Limit legacy SCSI command line handling to non-hotplugged devices
* Replace some SysBusDeviceClass::init with DeviceClass::realize
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=PXnV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM device refactorings
* Avoid TYPE_* in VMStateDescription name
* Replace some DO_UPCAST()s and FROM_SYSBUS()s with QOM casts
* Limit legacy SCSI command line handling to non-hotplugged devices
* Replace some SysBusDeviceClass::init with DeviceClass::realize
# gpg: Signature made Mon 22 Jul 2013 06:31:42 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Hu Tao (26) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony: (55 commits)
isa-bus: Drop isabus_bridge_init() since it does nothing
ioapic: Use QOM realize for ioapic
kvmvapic: Use QOM realize
kvm/clock: Use QOM realize for kvmclock
hpet: Use QOM realize for hpet
scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
megasas: Legacy command line handling fix
scsi/esp: Use QOM realize for scsi esp
fw_cfg: Use QOM realize for fw_cfg
ahci: Use QOM realize for ahci
pflash_cfi02: Use QOM realize for pflash_cfi02
pflash_cfi01: Use QOM realize for pflash_cfi01
fdc: Improve error propagation for QOM realize
fdc: Use QOM realize for fdc
kvm/clock: QOM'ify some more
hpet: QOM'ify some more
scsi/esp: QOM'ify some more
fwcfg: QOM'ify some more
ahci: QOM'ify some more
pflash-cfi02: QOM'ify some more
...
This hunk got lost during merge. It is documentation.
Spotted-by: Peter Lieven <lieven-lists@dlhnet.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Older KVM version put invalid value in the segments registers dpl field for
real mode guests (0x3).
This breaks migration from those hosts to hosts with unrestricted guest support.
We detect it by checking CS dpl value for real mode guest and fix the dpl values
of all the segment registers.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Older KVM versions save CS dpl value to an invalid value for real mode guests
(0x3). This patch detect this situation when loading CPU state and set all the
segments dpl to zero.
This will allow migration from older KVM on host without unrestricted guest
to hosts with restricted guest support.
For example migration from a Penryn host (with kernel 2.6.32) to
a Westmere host (for real mode guest) will fail with "kvm: unhandled exit 80000021".
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As described in the previous patch, until now, the MIG_STATE_SETUP
state was not really a 'formal' state. It has been used as a 'zero' state
(what we're calling 'NONE' here) and QEMU has been unconditionally transitioning
into this state when the QMP migration command was called. Instead we want to
introduce MIG_STATE_NONE, which is our starting state in the state machine, and
then immediately transition into the MIG_STATE_SETUP state when the QMP migrate
command is issued.
In order to do this, we must delay the transition into MIG_STATE_ACTIVE until
later in the migration_thread(). This is done to be able to timestamp the amount of
time spent in the SETUP state for proper accounting to the user during
an RDMA migration.
Furthermore, the management software, until now, has never been aware of the
existence of the SETUP state whatsoever. This must change, because, timing of this
state implies that the state actually exists.
These two patches cannot be separated because the 'query_migrate' QMP
switch statement needs to know how to handle this new state transition.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch is in preparation for the next ones: Until now the MIG_STATE_SETUP
state was not really a 'formal' state. It has been used as a 'zero' state
and QEMU has been unconditionally transitioning into this state when
the QMP migrate command was called. In preparation for timing this state,
we have to make this state a a 'real' state which actually gets transitioned
from later in the migration_thread() from SETUP => ACTIVE, rather than just
automatically dropping into this state at the beginninig of the migration.
This means that the state transition function (migration_finish_set_state())
needs to be capable of transitioning from valid states _other_ than just
MIG_STATE_ACTIVE.
The function is in fact already capable of doing that, but was not allowing the
old state to be a parameter specified as an input.
This patch fixes that and only makes the transition if the current state
matches the old state that the caller intended to transition from.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This takes advantages of the previous patches:
1. use the new QEMUFileOps hook 'save_page'
2. call out to the right accessor methods to invoke
the iteration hooks defined in QEMUFileOps
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This gives RDMA shared access to madvise() on the destination side
when an entire chunk is found to be zero.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We were not checking for a valid 'bytes_sent' pointer before accessing it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As requested, the protocol now includes memory unpinning support.
This has been implemented in a non-optimized manner, in such a way
that one could devise an LRU or other workload-specific information
on top of the basic mechanism to influence the way unpinning happens
during runtime.
The feature is not yet user-facing, and is thus can only be enabled
at compile-time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make inline target_memory_rw_debug() always available and change its
argument to CPUState. Let it check if CPUClass::memory_rw_debug provides
a specialized callback and fall back to cpu_memory_rw_debug() otherwise.
The only overriding implementation is for 32-bit sparc.
This prepares for changing GDBState::g_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Callback implementations were specific to arm and m68k, so can easily
cast to ARMCPU and M68kCPU respectively.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer directly used since converting CPU loops to
CPUState.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
In particular reindent to 4 instead of 2 spaces.
Prepares for changing cpu_single_step() argument in gdb_handlesig().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds support for GDB's c addr (Continue) and s addr (Single Step).
Prepares for dropping cpu_pc_from_tb().
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds support for GDB's c addr (Continue) and s addr (Single Step).
Prepares for dropping cpu_pc_from_tb().
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds support for GDB's c addr (Continue) and s addr (Single Step).
Prepares for dropping cpu_pc_from_tb().
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also extend documentation of target_ulong and abi_ulong.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
vaddr is to target_ulong what uintmax_t is to unsigned int.
Its purpose is to allow turning per-target functions with target_ulong
arguments into CPUClass hooks.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since first_cpu/next_cpu are CPUState, CPUArchState is no longer needed.
This resolves a NULL pointer dereference of query_cpu, introduced
with commit 182735efaf and reported by
TeLeMan and Max Filippov.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Only apply legacy command line handling when the device has not been
hot-plugged. Propagate failure of legacy command line handling.
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Vincenzo Maffione