It is not clear from the code how a 0 parameter should be handled by the
hardware. Keep the same behavior as ffs(0) - 1 == -1.
Cc: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models aren't supposed to go on fishing expeditions for
backends. They should expose suitable properties for the user to set.
For onboard devices, board code sets them.
A number of sysbus devices pick up block backends in their init() /
instance_init() methods with drive_get_next() instead: sl-nand,
milkymist-memcard, pl181, generic-sdhci.
Likewise, a number of sysbus devices pick up character backends in
their init() / realize() methods with qemu_char_get_next_serial():
cadence_uart, digic-uart, etraxfs,serial, lm32-juart, lm32-uart,
milkymist-uart, pl011, stm32f2xx-usart, xlnx.xps-uartlite.
All these mistakes are already marked FIXME. See the commit that
added these FIXMEs for a more detailed explanation of what's wrong.
Fortunately, only machines ppce500 and pseries-* support -device with
sysbus devices, and none of the devices above is supported with these
machines.
Set cannot_instantiate_with_device_add_yet to preserve our luck.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
NICs defined with -net nic are for board initialization to wire up.
Board code examines nd_table[] to find them, and creates devices with
their qdev NIC properties set accordingly.
Except "allwinner-a10" goes on a fishing expedition for NIC
configuration instead of exposing the usual NIC properties for board
code to set: it uses nd_table[0] in its instance_init() method.
Picking up the first -net nic option's configuration that way works
when the device is created by board code. But it's inappropriate for
-device and device_add. Not only is it inconsistent with how the
other block device models work (they get their configuration from
properties "mac", "vlan", "netdev"), it breaks when nd_table[0] has
been picked up by the board or a previous -device / device_add
already.
Example:
$ qemu-system-arm -S -M cubieboard -device allwinner-a10
qemu-system-arm: -device allwinner-a10: Property 'allwinner-emac.netdev' can't take value 'hub0port0', it's in use
Aborted (core dumped)
It also breaks in other entertaining ways:
$ qemu-system-arm -M highbank -device allwinner-a10
qemu-system-arm: -device allwinner-a10: Unsupported NIC model: xgmac
$ qemu-system-arm -M highbank -net nic,model=allwinner-emac -device allwinner-a10
qemu-system-arm: Unsupported NIC model: allwinner-emac
Mark the mistake with a FIXME comment.
Cc: Li Guang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Character devices defined with -serial and -parallel are for board
initialization to wire up. Board code examines serial_hds[] and
parallel_hds[] to find them, and creates devices with their qdev
chardev properties set accordingly.
Except a few devices go on a fishing expedition for a suitable backend
instead of exposing a chardev property for board code to set: they use
serial_hds[] (often via qemu_char_get_next_serial()) or parallel_hds[]
in their realize() or init() method to connect to a backend.
Picking up backends that way works when the devices are created by
board code. But it's inappropriate for -device or device_add. Not
only is it inconsistent with how the other characrer device models
work (they connect to a backend explicitly identified by a "chardev"
property), it breaks when the backend has been picked up by the board
or a previous -device / device_add already.
Example:
$ qemu-system-ppc64 -M bamboo -S -device i82378 -device pc87312 -device pc87312
qemu-system-ppc64: -device pc87312: Property 'isa-parallel.chardev' can't take value 'parallel0', it's in use
Mark them with suitable FIXME comments.
Cc: Li Guang <lig.fnst@cn.fujitsu.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: "Andreas Färber" <andreas.faerber@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Drives defined with if!=none are for board initialization to wire up.
Board code calls drive_get() or similar to find them, and creates
devices with their qdev drive properties set accordingly.
Except a few devices go on a fishing expedition for a suitable backend
instead of exposing a drive property for board code to set: they call
driver_get() or drive_get_next() in their realize() or init() method
to implicitly connect to the "next" backend with a certain interface
type.
Picking up backends that way works when the devices are created by
board code. But it's inappropriate for -device or device_add. Not
only is this inconsistent with how the other block device models work
(they connect to a backend explicitly identified by a "drive"
property), it breaks when the "next" backend has been picked up by the
board already.
Example:
$ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd
Aborted (core dumped)
Mark them with suitable FIXME comments.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: "Andreas Färber" <andreas.faerber@web.de>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commits 6e05a12f8f and db25a1581 both attempt to fix the
same "failed to free memory containing flash filename" bug,
with the effect that when they were both applied we ended
up freeing the memory twice. Delete the spurious extra free.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1427968334-14527-1-git-send-email-peter.maydell@linaro.org
As 4de9a88(hw/arm/virt: Fix memory leak reported by Coverity)
and 6e05a12(arm: fix memory leak) both handle the memory leak
reported by Coverity, this cause qemu corruption due to
double free.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1427944026-8968-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the conditional statement had to be split anyway, we can also
add a better error report message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426877982-3603-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the conditional statement had to be split anyway, we can also
add a better error report message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426877963-3556-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a resource leak for sysboot_filename which is allocated
by qemu_find_file.
In addition, that name is used to get the size of the image, but a
different image name was used to load it.
In addition, instead of passing the maximum allowed image size the actual
image size was passed to load_image_targphys.
Fix all three issues.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426326781-2488-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a continuation of the work started in commit 565f65d27:
"error: Use error_report_err() where appropriate"
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This allows to use the SD card emulation of the board: Forward the
signals from the pl181 top the CP control register emulation, report the
current state via CP_INTREG, deliver CARDIN IRQ to the secondary
interrupt controller and also support clearing that line via CP_INTREG.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: c55d9fb28d19ec83625cb0074b3b6f2e5958caf6.1426004843.git.jan.kiszka@siemens.com
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently introduced feature that allows 32 bit guests to be
executed under KVM on a 64-bit host incorrectly handles the case
where more than 1 cpu is specified using '-smp N'
For instance, this invocation of qemu
qemu-system-aarch64 -M virt -cpu cortex-a57,aarch64=off -smp 2
produces the following error
qemu-system-aarch64: Expected key=value format, found aarch64
which is caused by the destructive parsing performed by
cpu_common_parse_features(), resulting in subsequent attempts
to parse the CPU option string (for each additional CPU) to fail.
So duplicate the string before parsing it, and free it directly
afterwards.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1425402380-10488-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added machvirt parsing of feature keywords added to the -cpu command line
option. Parsing occurs during machine initialization.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1423736974-14254-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.
I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update to arm_cpu_reset() to reset into the highest available exception level
based on the set ARM features.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com
[PMM: removed stale FIXME comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch moves the memory region init code from the
armv7m_init function to the stellaris_init function
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4836be7e1d708554d6eb0bc639dc2fbf7dac0458.1422077994.git.alistair23@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt board already ensures mutual exclusion between -bios and -pflash
unit#0; we only need to set "bootinfo.firmware_loaded", introduced in the
previous patch, if either of those options was used to load the guest
firmware.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-12-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().
Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().
Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:
nr -bios -pflash -kernel description
unit#0
-- ------- ------- ------- -------------------------------------------
1 present present absent Board code rejects this case, -bios and
present present present -pflash unit#0 are exclusive. Left intact
by this patch.
2 absent absent present Traditional kernel loading, with qemu's
minimal board firmware. Left intact by this
patch.
3 absent present absent Preexistent case for booting guest firmware
present absent absent loaded with -bios or -pflash. Left intact
by this patch.
4 absent absent absent Preexistent case for not loading any
firmware or kernel up-front. Left intact by
this patch.
5 present absent present New case introduced by this patch: kernel
absent present present image is passed to externally loaded
firmware in unmodified form, using fw_cfg.
An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fw_cfg already supports exposure over MMIO (used in ppc/mac_newworld.c,
ppc/mac_oldworld.c, sparc/sun4m.c); we can easily add it to the "virt"
board.
Because MMIO access is slow on ARM KVM, we enable the guest, with
fw_cfg_init_mem_wide(), to transfer up to 8 bytes with a single access.
This has been measured to speed up transfers up to 7.5-fold, relative to
single byte data access, on both ARM KVM and x86_64 TCG.
The MMIO register block of fw_cfg is advertized in the device tree. As
base address we pick 0x09020000, which conforms to the comment preceding
"a15memmap": it falls in the miscellaneous device I/O range 128MB..256MB,
and it is aligned at 64KB. The DTB properties follow the documentation in
the Linux source file "Documentation/devicetree/bindings/arm/fw-cfg.txt".
fw_cfg automatically exports a number of files to the guest; for example,
"bootorder" (see fw_cfg_machine_reset()).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be
configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially
support EL3. This preserves backwards compatibility.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit changes the integratorcp and versatilepb CPU initialization from
using the generic ARM cpu_arm_init function to doing it inline. This is
necessary in order to allow CPU configuration changes to occur between CPU
instance initialization and realization. Specifically, this change is in
preparation for disabling CPU EL3 support.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-14-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the virt machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during virt CPU initialization. Also disables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-13-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the vexpress machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during vexpress CPU initialization. Also enables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-12-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds the secure_boot boolean field to the arm_boot_info descriptor. This
fields is used to indicate whether Linux should boot into secure or non-secure
state if the ARM EL3 feature is enabled. The default is to leave the CPU in an
unaltered reset state. On EL3 enabled systems, the reset state is secure and
can be overridden by setting the added field to false.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" virt machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, virt machines boot into NS/SVC. When using
the QEMU -bios command line argument, virt machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=virt,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch virt qemu machine support to use the newer object type, class, and
instance model. Added virt TypeInfo with static registration along with virt
specific class and machine structs. Also added virt class initialization
method.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-7-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the Vexpress daughterboard initialization method to take a vexpress
machine state pointer instead of the daughterboard struct pointer. The machine
state now contains the daughterboard pointer.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-6-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" Vexpress machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, Vexpress machines boot into NS/SVC. When using
the QEMU -bios command line argument, Vexpress machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=vexpress-a15,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switched the Vexpress machine initialization to use the common function with
the machine pointer to board info.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Vexpress machine objects for the the Cortex A9 & A15 variants. The older
style QEMUMachine types were replaced with dedicated TypeInfo objects. The new
objects include dedicated class init functions that currently ustilze dedicated
machine init methods. The previous qemu_register_machine calls were replaced
with the newer type_register_status calls.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds base Vexpress class and machine objects and infrastructure. This is in
preparation for switching to the full QEMU object model. The base vexpress
infrastructure is intended to handle common vexpress details.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports the 'size' may be used uninitialized, but that can't happen,
because the caller has checked "if (binfo->dtb_filename || binfo->get_dtb)"
before call 'load_dtb'.
Here we simply remove the 'if (binfo->get_dtb)' to satisfy coverity.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 1416826240-12368-1-git-send-email-zhang.zhanghailiang@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Variable 'ram_lo' is allocated unconditionally, but used only in some cases.
When it is unused pointer will be lost at function exit, resulting in a
memory leak. Allocate memory for 'ram_lo' only if it is needed.
Valgrind output:
==16879== 240 bytes in 1 blocks are definitely lost in loss record 6,033 of 7,018
==16879== at 0x4C2AB80: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==16879== by 0x33D2CE: malloc_and_trace (vl.c:2804)
==16879== by 0x509E610: g_malloc (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4000.0)
==16879== by 0x288836: realview_init (realview.c:55)
==16879== by 0x28988C: realview_pb_a8_init (realview.c:375)
==16879== by 0x341426: main (vl.c:4413)
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DACR has a secure and a non-secure instance. Adds definition for DACR32_EL2.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-19-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds secure and non-secure bank register suport for TTBR0 and TTBR1.
Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as
well as a CP register definition for TTBR0_EL3. Added a union containing
both EL based array fields and secure and non-secure fields mapped to them.
Updated accesses to use A32_BANKED_CURRENT_REG_GET macro.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-17-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ePAPR 1.1 defines the stdout-path property, making the os-specific
linux,stdout-path property redundant. Change the DT setup for ARM virt
to use the generic property - supported by Linux since 3.15.
The old QEMU behaviour was not present in any released version of
QEMU, and was only added to QEMU after the kernel changed, so
this should not break any existing setups.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[PMM: add note to commit about the old behaviour never hving been
in a released version of QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Now that we have PSCI emulation, enable it for the virt platform.
This simplifies the virt machine a bit now that PSCI no longer
needs to be a KVM only feature.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-8-git-send-email-peter.maydell@linaro.org
Move the registering of CPU reset handlers to before the point where
we leave the function in the -bios (not -kernel) case, so CPU reset
works correctly with -bios as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check if the first cpu is an armv8 cpu, and if so, put
arm,armv8-timer in the compatible string list.
Note that due to this check, this patch moves the creation
of the timer fdt node to after the cpu creation loop.
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1411736960-24206-1-git-send-email-hw.claudio@gmail.com
[PMM: updated to list arm,armv8-timer first]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=GIKW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for loading DTB images when booting ELF images using
-kernel. If there are no conflicts with the placement of the ELF
segments, the DTB image is loaded at the base of RAM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we are running the 'virt' machine, we may have a device tree blob but no
kernel to supply it to if no -kernel option was passed. In that case, copy it
to the base of RAM where it can be picked up by a bootloader.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an address limit input parameter to load_dtb() so that we can
tell load_dtb() how much memory the dtb is allowed to consume. If
the dtb doesn't fit, return 0, otherwise return the actual size of
the loaded dtb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-3-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to make the device tree blob (DTB) available in memory not only at
first boot, but also after system reset, use rom_blob_add_fixed() to install
it into memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pl011 and pl031 devices both use level triggered interrupts,
but the device tree we construct was incorrectly telling the
kernel to configure the GIC to treat them as edge triggered.
This meant that output from the pl011 would hang after a while.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1410274423-9461-1-git-send-email-peter.maydell@linaro.org
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org
Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1409930126-28449-2-git-send-email-ard.biesheuvel@linaro.org
Add a property "linux,stdout-path" to the /chosen DT node and make
it point to the emulated UART. This allows users such as the Linux
kernel to produce console output without the need to pass console=
or earlycon=pl011,0x... command line arguments.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1409317439-29349-1-git-send-email-ard.biesheuvel@linaro.org
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm running on a system with 8 cpus and it would be nice to have qemu
support all of them. The attached patch does that and has been tested.
That said, I'm not sure if 8 is enough or if we want to bump this even higher
now before systems with many more cpus come along. 255 anyone?
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Message-id: 20140819213304.19537.2834.stgit@joelaarch64.amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This argument is a MemoryRegion and not an AddressSpace.
"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On aarch64 it is the bootloader's job to uncompress the kernel. UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.
However the qemu -kernel option does not do this. The following
command does not work:
qemu-system-aarch64 [...] -kernel /boot/vmlinuz
because it tries to execute the gzip-compressed data.
This commit lets gzip-compressed kernels be uncompressed
transparently.
Currently this is only done when emulating aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.
This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT. Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.
Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts. After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.
Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only). Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels. Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>. To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.
However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some spacing and zeros to make it easier to read and
modify the map. This patch has no functional changes. The
review looks ugly, but it's actually pretty easy to confirm
all the addresses are as they should be - thanks to the new
formatting ;-)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code in do_cpu_reset() correctly handled AArch64 CPUs
when running Linux kernels, but was missing code in the
branch of the if() that deals with loading ELF files.
Correctly jump to the ELF entry point on reset rather than
leaving the reset PC at zero.
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Cc: qemu-stable@nongnu.org
pl031's base address should be 0x9010000, not 0x90010000, otherwise
it sits in ram when configuring a guest with greater than 1G.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the vexpress-a9 board alias the first NOR flash region at
address zero, like vexpress-a15. This makes "-bios" actually usable
on this board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1404310070-3561-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
If we have PSCI v0.2 emulation available for KVM ARM/ARM64 or TCG then
we need to provide PSCI v0.2 compatible string via generated DTB.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1402901605-24551-9-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Detect attempts by the user to specify the contents of the first flash
device via both -bios and -drive if=pflash... simultaneously and
print a helpful error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402419834-25982-1-git-send-email-peter.maydell@linaro.org
The Windows headers provided by MinGW define MOD_SHIFT. Avoid
it by using SPITZ_MOD_* for our constants here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.
The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.
Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Roy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To get it out of the default GPIO list. This allows child devices to
use the un-named GPIO namespace without having to be SSI aware. That
is, there is no more need for machines to know about the obscure
policy where GPIO 0 is the SSI chip-select and GPIO 1..N are the
concrete class GPIOs (defined locally as 0..N-1).
This is most notable in stellaris, which uses a device which has both
SSI and concrete level GPIOs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
We don't implement very much of the GPTM TAR register, and what we
do is wrong. The "are we in RT mode?" field is in s->config, not
s->control. Correct this, use LOG_UNIMP rather than hw_error()
for the cases we don't support, and avoid an unlabelled fallthrough
that makes Coverity complain.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
When writing to the YEARS_REG register, if the year value is
99 then the multiplication by 31536000 will overflow into
the sign bit of a 32 bit value and then be erroneously
sign-extended if time_t is 64 bits. Add a cast to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CVE-2013-4533
s->rx_level is read from the wire and used to determine how many bytes
to subsequently read into s->rx_fifo[]. If s->rx_level exceeds the
length of s->rx_fifo[] the buffer can be overrun with arbitrary data
from the wire.
Fix this by validating rx_level against the size of s->rx_fifo.
Cc: Don Koch <dkoch@verizon.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For an AArch64 CPU which supports 64K pages, having the GIC
register banks at 4K offsets is potentially awkward. Move
them out to being at 64K offsets. (This is harmless for
AArch32 CPUs and for AArch64 CPUs with 4K pages, so it is simpler
to use the same offsets everywhere than to try to use 64K offsets
only for AArch64 host CPUs.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-3-git-send-email-peter.maydell@linaro.org
Rather than having the virt machine model create an a15mpcore_priv
device regardless of the actual CPU type in order to instantiate the GIC,
move to having the machine model create the GIC directly. This
corresponds to a system which uses a standalone GIC (eg the GIC-400)
rather than the one built in to the CPU core.
The primary motivation for this is to support the Cortex-A57,
which for a KVM configuration will use a GICv2, which is not
built into the CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-2-git-send-email-peter.maydell@linaro.org
This implements the prescaler and source fields of the timer control
register. The source for each timer can be selected among 4 clock
inputs whose frequencies are set through model properties.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1395771730-16882-6-git-send-email-b.galvani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Currently for both qemu-system-arm and qemu-system-aarch64
the default board model if the user doesn't specify one
is the 'integratorcp'. This is a totally arbitrary historical
accident since it was the first board to be modelled.
That board is now just one target among many for us, and
is a very poor choice of default:
* it's an ancient board that is now only found in the
junkpiles of longtime ARM/Linux hackers, if at all
* it's an ARMv5 CPU, when most distros are now assuming
ARMv7
* it's pretty much unmaintained in QEMU
* it doesn't even have versatilepb's advantage of
supporting PCI
Making it or any other board the default serves only
to confuse people new to ARM who expect something more
like the x86 monoculture. Remove the is_default marker
from integratorcp, and don't set it for any other board,
to give users a nudge that they need to think about
which board they want a QEMU model of. (QEMU will produce
the admittedly slightly cryptic error "No machine found.")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
When trying to load an ELF file specified via -kernel, we need to
pass load_elf() the ELF machine type corresponding to the CPU we're
booting with, not the one corresponding to the softmmu binary
we happen to be running. (The two are different in the case of
loading a 32-bit ARM ELF file into a 32 bit CPU being emulated
by qemu-system aarch64.) This was causing us to incorrectly fail
to load ELF images in this situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1395427476-25546-1-git-send-email-peter.maydell@linaro.org
Set the reset-cbar property on CPUs used by the virt board,
if they have it. This isn't necessary for correct functioning
under Linux (since the A9 isn't a valid CPU for the virt board),
but it is the correct behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-5-git-send-email-peter.maydell@linaro.org
Set the reset-cbar property of the Exynos4210 SoC's Cortex-A9
CPUs, so that Linux doesn't misrecognize them as a broken
uniprocessor SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-4-git-send-email-peter.maydell@linaro.org
If the CPU is a Cortex-A9 then we should set its reset-cbar property
so that the guest can read the correct PERIPHBASE/CBAR register value;
newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
will otherwise assume the CPU is a buggy single core A9 SoC. The
realview-pbx-a9 is the only one of the cluster of boards in realview.c
which works with the Cortex-A9 (ie which gets an a9mpcore_priv device);
make sure it also has reset-cbar set correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-3-git-send-email-peter.maydell@linaro.org
Newer versions of the Linux kernel (as of commit bc41b8724 in 3.12)
now assume that if the CPU is a Cortex-A9 and the reset value of the
PERIPHBASE/CBAR register is zero then the CPU is a specific buggy
single core A9 SoC, and will not try to start other cores. Since we
now have a CPU property for the reset value of the CBAR, we can
just fix the vexpress board model to correctly set CBAR so SMP
works again. To avoid duplicate boilerplate code in both the A9
and A15 daughterboard init functions, we split out the CPU and
private memory region init to its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1394462692-8871-2-git-send-email-peter.maydell@linaro.org
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Introduce local DeviceState variable for transition to QOM realize]
Signed-off-by: Andreas Färber <afaerber@suse.de>
To avoid complication in code that otherwise would not need to
care about whether EL1 is AArch32 or AArch64, we should store
the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF
in AArch64) in one place consistently regardless of EL1's mode.
Since AArch64 has an extra enable bit (D for debug exceptions)
which isn't visible in AArch32, this means we need to keep
the enables in env->pstate. (This is also consistent with the
general approach we're taking that we handle 32 bit CPUs as
being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Implement the AArch64 TTBR* registers. For v7 these were already 64 bits
to handle LPAE, but implemented as two separate uint32_t fields.
Combine them into a single uint64_t which can be used for all purposes.
Since this requires touching every use, take the opportunity to rename
the field to the architectural name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The ethernet device in the musicpal only has two tx queues,
but we modelled it with four CTDP registers, presumably a
cut and paste from the rx queue registers. Since the tx_queue[]
array is only 2 entries long this allowed a guest to overrun
this buffer. Remove the nonexistent registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392737293-10073-1-git-send-email-peter.maydell@linaro.org
Acked-by: Jan Kiszka <jan.kiszka@web.de>
Cc: qemu-stable@nongnu.org
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=h/1p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140220' into staging
target-arm queue:
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
# gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits)
linux-user: AArch64: Fix exclusive store of the zero register
target-arm: A64: Implement unprivileged load/store
target-arm: A64: Implement narrowing three-reg-diff operations
target-arm: A64: Implement the wide 3-reg-different operations
target-arm: A64: Add most remaining three-reg-diff widening ops
target-arm: A64: Add opcode comments to disas_simd_three_reg_diff
target-arm: A64: Implement store-exclusive for system mode
target-arm: Fix incorrect type for value argument to write_raw_cp_reg
target-arm: Remove failure status return from read/write_raw_cp_reg
target-arm: Remove unnecessary code now read/write fns can't fail
target-arm: Drop success/fail return from cpreg read and write functions
target-arm: Convert miscellaneous reginfo structs to accessfn
target-arm: Convert generic timer reginfo to accessfn
target-arm: Convert performance monitor reginfo to accessfn
target-arm: Split cpreg access checks out from read/write functions
target-arm: Stop underdecoding ARM946 PRBS registers
target-arm: Log bad system register accesses with LOG_UNIMP
target-arm: Remove unused ARMCPUState sr substruct
target-arm: Restrict check_ap() use of S and R bits to v6 and earlier
target-arm: Define names for SCTLR bits
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All cpreg read and write functions now return 0, so we can clean up
their prototypes:
* write functions return void
* read functions return the value rather than taking a pointer
to write the value to
This is a fairly mechanical change which makes only the bare
minimum set of changes to the callers of read and write functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename the parent field. Reuse the type constant in z2_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Use TYPE_AER915 in z2_init() too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() with QOM cast macro.
Rename parent field. Use type constant in tosa_tg_init().
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace usages of FROM_I2C_SLAVE() and direct parent field accesses with
QOM cast macro. Rename parent field to assure we caught all. Reuse type
constant in pxa2xx_i2c_init().
Add some missing braces while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The VMSTATE_STRUCT_POINTER macros are a bit odd in that they
must be passed an argument "FooType *" rather than just taking
the FooType. They're only used in one place, so it's easy to
tidy this up. This also lets us use the macro to replace the
hand-rolled VMSTATE_PTIMER.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch uses the fact that the midr variable is now a property
This patch sets the midr variable to the boards custom midr
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: a3754b10d150af72e4688a993e484fa2b9b8fa21.1390176489.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code which decides whether to set up the ATAGS data structure on
reset was using the wrong conditional, which meant we were creating
an ATAGS structure when doing a device-tree boot if the dtb was
autogenerated by the board. This is harmless, but unnecessary, so
bring it in to line with user-provided-dtb boots.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1388326833-656-1-git-send-email-peter.maydell@linaro.org
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WrhM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.
This allows for probing of the device by expectant guests (such as
OS's). This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.
Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cgcc reported a duplicate initialisation. Mainstone includes a matrix
keyboard where two different positions map to 'space'.
QEMU uses the reversed mapping and does not map 'space' to two different
matrix positions.
Some other keys are either missing or might be mapped wrongly (cf. Linux
kernel code). Don't fix these until someone can test them with real
hardware, but add TODO comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mapping is a hardware feature, so it is relatively constant.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The memory region can be included by value instead of by reference in the
device state.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The qemu_devtree API is a wrapper around the fdt_ set of APIs.
Rename accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[agraf: also convert hw/arm/virt.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Message-id: 1387188908-754-6-git-send-email-antonynpavlov@gmail.com
[PMM: don't try to load ROM blob if qtest_enabled()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Message-id: 1387188908-754-3-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placeholders for Board-ID
that are used to implement uniform indexing across different bootloaders.
Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-7-git-send-email-peter.maydell@linaro.org
[PMM:
* updated to use ARMInsnFixup style bootloader fragments
* dropped virt.c additions
* use runtime checks for "is this an AArch64 core" rather than ifdefs
* drop some unnecessary setting of registers in reset hook
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
For AArch64 we will obviously require a different set of
primary and secondary boot loader code fragments. However currently
we hardcode the offsets into the loader code where we must write
the entrypoint and other data into arm_load_kernel(). This makes it
hard to substitute a different loader fragment, so switch to a more
flexible scheme where instead of a raw array of instructions we use
an array of (instruction, fixup-type) pairs that indicate which
words need special action or data written into them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
GIC_BASE_ADDR is not the base address of the GIC. Its clear from the
code that this is the base address of the MPCore. Rename to
MPCORE_PERIPHBASE accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the CBAR initialisation by using the newly defined static property.
Zynq will now correctly init the CBAR to the SCU base address.
Needed to boot Linux on the xilinx_zynq machine model.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8db7d57ebe5418fed397fcc86ea719f98446c178.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow the machine model to set device properties before CPU
realization.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: e57658b4506b26ab6b6fadbe6d7827f669f51895.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.
So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---
Which disappears with this patch.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow the machine model to set device properties before CPU
realization.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8c671e500390c8be0cc363e887e32867d1d1b0d2.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix NOR flash manufacturer and device ID reading. This now
properly takes into account device widths and device max widths
as required. The reading of these IDs uses the same max_width
dependent addressing as CFI queries.
The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate. The existing code seems very broken.
Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.
The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create vexpress specific pflash registration
function which properly configures the device-width
of 16 bits (2 bytes) for the NOR flash on the
vexpress platform. This change is required for
buffered flash writes to work properly.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-5-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support -cpu host in virt machine (treating it like an A15, ie
with a GIC v2 and the A15's private peripherals.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-12-git-send-email-peter.maydell@linaro.org
Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
Significantly overhauled:
* renamed user-facing machine to just "virt"
* removed the A9 support (it can't work since the A9 has no
generic timers)
* added virtio-mmio transports instead of random set of 'soc' devices
(though we retain a pl011 UART)
* instead of updating io_base as we step through adding devices,
define a memory map with an array (similar to vexpress)
* similarly, define irqmap with an array
* folded in some minor fixes from John's aarch64-support patch
* rather than explicitly doing endian-swapping on FDT cells,
use fdt APIs that let us just pass in host-endian values
and let the fdt layer take care of the swapping
* miscellaneous minor code cleanups and style fixes
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If no fdt is provided on command line and the new field
get_dtb in struct arm_boot_info is set then call it to
get a device tree blob.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org
[PMM: minor tweaks and cleanup]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux kernel from version 3.4 requires CM_REFCNT register for sched timer
for Integrator/CP board (integrator_defconfig).
See http://infocenter.arm.com/help/topic/com.arm.doc.dui0138e/ch04s06s11.html
Signed-off-by: Jan Petrous <jan.petrous@tieto.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).
Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.
Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that arm_load_kernel doesn't insist on a kernel filename
being present, we can remove some unnecessary conditionals
in board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1379980897-21277-3-git-send-email-peter.maydell@linaro.org
Typically ARM boards will have some kind of flash which might contain
a boot ROM; it's therefore a valid use case to provide only an
image for the boot ROM and not require QEMU's internal boot loader
at all. Remove the fatal error if -kernel isn't specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1379980897-21277-2-git-send-email-peter.maydell@linaro.org
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=/bSY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Use #defines instead of magic numbers for CPUID cache info
cpu: Replace qemu_for_each_cpu()
cpu: Use QTAILQ for CPU list
a15mpcore: Use qemu_get_cpu() for generic timers
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert rtc_clock to be a QEMUClockType
Move rtc_clock users to use the new API
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-14-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-13-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-12-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-11-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-10-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-9-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-8-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-7-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-6-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-4-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-3-git-send-email-peter.maydell@linaro.org
Now that ARMCPU is a subclass of DeviceState, we can make the
CPU's inbound IRQ and FIQ lines be simply gpio lines, which
means we can remove the odd arm_pic shim.
We retain the arm_pic_init_cpu() function as a backwards
compatibility shim layer so we can convert the board models
to get the IRQ and FIQ lines directly from the ARMCPU
object one at a time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-2-git-send-email-peter.maydell@linaro.org
pxa2xx_i2c_init() creates a pxa2xx-i2c-slave device on a second i2c-bus,
which has a NULL parent device. This causes an assertion in
object_get_canonical_path() when accessing pxa2xx-i2c-slave's
"parent_bus" link<bus> property in tosa and likely other PXA2xx machines.
Fix this by using the pxa2xx_i2c device, created just before, as parent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375621501-5564-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The misspelling was spotted by Andreas Färber.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The load_ramdisk function is used to load ramdisk featuring a U-Boot
header.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-3-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some virtio-mmio transports to the vexpress board model,
together with a modify_dtb hook which adds them to the device
tree so that the kernel will probe for them. We put them
in a reserved area of the address map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-9-git-send-email-peter.maydell@linaro.org
Make the VEDBoardInfo struct extend arm_boot_info; this will
allow us to get at the VEDBoardInfo information inside callbacks
from arm/boot code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org
Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
Replace the opencoded assembly of the reg property array for the
/memory node with a call to qemu_devtree_setprop_sized_cells().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-3-git-send-email-peter.maydell@linaro.org
The Calxeda ECX-2000 chip (aka. Midway) is model-wise quite similar
to the Highbank. The most prominent difference is the Cortex-A15 CPU
core in it, together with the associated core peripherals.
Add a new ARM machine type called "midway".
Move the L2 cache controller device into the Highbank specific part,
since Midway does not have (and need) it.
Signed-off-by: Andre Przywara <andre.przywara@calxeda.com>
Message-id: 1373026897-12085-3-git-send-email-andre.przywara@calxeda.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow the modelling of machines similar to Calxeda Highbank,
introduce a parameter to the init function and call it from a
wrapper. This allows to tweak the definition for individual machines
later on.
Signed-off-by: Andre Przywara <andre.przywara@calxeda.com>
Message-id: 1373026897-12085-2-git-send-email-andre.przywara@calxeda.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A15 Versatile Express board can remap a variety of things at address
0. We don't currently emulate the Serial Configuration Controller which
is how the guest can control this remapping, but we can provide the
initial default mapping of the first flash device into this space.
In particular this allows QEMU to boot flash images such as UEFI which
expect to include an exception vector table.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Grant Likely <grant.likely@linaro.org>
Message-id: 1373374180-19884-1-git-send-email-peter.maydell@linaro.org
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371209256-11408-1-git-send-email-peter.maydell@linaro.org
By calling qemu_devtree_dumpdtb near the end of load_dtb.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we know we're compiling with libfdt, we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-3-git-send-email-peter.maydell@linaro.org
Even if we do not register newly created RAM MemoryRegion for migration with
vmstate_register_ram_global() function, ram_save_setup() still saves this region
to snapshot file with empty idstr=="". Consequently this results in error during
VM loading in ram_load().
Register rom_mem for migration.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos SoC was misusing memory_region_init_ram_ptr(): this interface can safely
be used only for memory regions which size is a multiple of target page size.
Change chipid_and_omr memory to an mmio region to fix this.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-2-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make SPI and QSPI different classes. QSPIPS is setup as a child of SPIPS.
Only QSPI has the LQSPI functionality, so move all that to the child class.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 2cdd0cadb5ba77ca02fde5cae627852dc9a64c71.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/versatile_pci: Drop unnecessary vpb_pci_config_addr()
versatile_pci: Expose PCI memory space to system
arm/realview: Fix mapping of PCI regions
versatile_pci: Implement the PCI controller's control registers
versatile_pci: Implement the correct PCI IRQ mapping
versatile_pci: Put the host bridge PCI device at slot 29
versatile_pci: Use separate PCI I/O space rather than system I/O space
versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGE
versatile_pci: Update to realize and instance init functions
versatile_pci: Expose PCI I/O region on Versatile PB
versatile_pci: Fix hardcoded tabs
The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).
The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Comments in the QEMU source code claim that the version of the PCI
controller on the VersatilePB board doesn't support the PCI I/O
region, but this is incorrect; expose that region, map it in the
correct location, and drop the misleading comments.
This change removes the only currently implemented difference
between the realview-pci and versatile-pci models; however there
are other differences in not-yet-implemented functionality, so we
retain the distinction between the two device types.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
cpu_physical_memory_read, cpu_physical_memory_write take any pointer
as 2nd argument without needing a type cast.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file. Done.
No console switching needed. No special support code in the
gfx card emulation needed. Zap it all. Also move ppm_save
out of the vga code and next to the qmp_screendump function.
For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles. I wanna finish the console cleanup before setting
new qapi interfaces into stone.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/nand.c: Fix nand erase operation
cadence_uart: Flush queued characters on reset
pl330: Don't inhibit ES bits on INTEN
pflash_cfi01: Implement migration support
pflash_cfi01: Drop unused 'bypass' field
hw/arm_gic_common: Use vmstate struct rather than save/load functions
arm_gic: Fix sizes of state fields in preparation for vmstate support
vmstate: Add support for two dimensional arrays
hw/onenand.c: fix migration of dynamically allocated buffer "otp"
hw/sd.c: fix migration of dynamically allocated buffer "buf"
vmstate.h: introduce VMSTATE_BUFFER_POINTER_UNSAFE macro
hw/arm_mptimer: Save the timer state
pl050: Don't send always-constant is_mouse field
hw/arm/nseries: don't print to stdout or stderr
Remove various bits of printing to stdout or stderr from the
nseries code, replacing it with a qemu log message where there's
an appropriate log category, and just dropping the output for
some of the more debug-like printing.
In particular, this will get rid of the 'mipid_reset' message
you currently get from 'make check'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363368565-24546-1-git-send-email-peter.maydell@linaro.org
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make musicpal-misc into its own (trivial) qdev device, so we
can get rid of the abuse of sysbus_add_memory().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.
This handles the graphic hardware emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pass voltage sensor properties to the sysctl device. Since
these are daughterboard specific, we specify them via the
VEDBoardInfo structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
Pass the daughterboard-specific proc_id property to the code that
creates the sysctl device via the VEDBoardInfo struct, rather than
by having the daughterboard init function write to a uint32_t*
argument. This is a cleaner way to pass the info around, and
is in line with the way we are going to handle voltage and
oscillator initialization.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement support for using the KVM in-kernel GIC for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Split the SCU in a9mpcore out into its own object definition. mpcore is now
just a container for the mpcore components.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added device model for the Xilinx Zynq SPI controller (SPIPS).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.
Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.
Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the Freescale i.MX31.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the Freescale i.MX31 advanced vectored interrupt controller, at least
to the extent it is used by Linux 3.x
Vectors are not implemented.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the timers on the Freescale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: Philip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi