These include page table walks, SVM accesses and SMM state save accesses.
The bulk of the patch is obtained with
sed -i 's/\(\<[a-z_]*_phys\(_notdirty\)\?\>(cs\)->as,/x86_\1,/'
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the code that was within the "exit" ifdef block
was identical to the cpu_compute_eflags inline, so make that
simplification at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e8f6d00c30 ("target-i386: raise
page fault for reserved physical address bits") added a check that the
NX bit is not set on PAE PDPEs, but it also added it to rsvd_mask for
the rest of the function. This caused any PDEs or PTEs with NX set to be
erroneously rejected, making PAE guests with NX support unusable.
Signed-off-by: William Grant <wgrant@ubuntu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, execute would be disabled for all pages with SMEP enabled,
regardless of what mode the access took place in.
Signed-off-by: Ricky Zhou <ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
User pages must be marked as non-executable when running under SMEP;
otherwise, fetching the page first and then calling it will fail.
With this patch, all SMEP testcases in kvm-unit-tests now pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4MB pages can use 40-bit addresses by putting the higher 8 bits in bits
20-13 of the PDE. Bit 21 is reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the tail of the PAE case, so that we can use "goto" in the
next patch to jump to the protection checks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use this MMU index at all if CR4.SMAP is false, and drop
the SMAP check from x86_cpu_handle_mmu_fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With SMAP, implicit kernel accesses from user mode always behave as
if AC=0. To do this, kernel mode is not anymore a separate MMU mode.
Instead, KERNEL_IDX is renamed to KSMAP_IDX and the kernel mode accessors
wrap KSMAP_IDX and KNOSMAP_IDX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most MSRs, plus the FPU, MMX, MXCSR, XMM and YMM registers should not
be zeroed on INIT (Table 9-1 in the Intel SDM). Copy them out of
CPUX86State and back in, instead of special casing env->pat.
The relevant fields are already consecutive except PAT and SMBASE.
However:
- KVM and Hyper-V MSRs should be reset because they include memory
locations written by the hypervisor. These MSRs are moved together
at the end of the preserved area.
- SVM state can be moved out of the way since it is written by VMRUN.
Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux guests, when using more than 4GB of RAM, may end up using 1GB pages
to store (kernel) data. When this happens, we're unable to debug a running
Linux kernel with GDB:
(gdb) p node_data[0]->node_id
Cannot access memory at address 0xffff88013fffd3a0
(gdb)
GDB returns this error because x86_cpu_get_phys_page_debug() doesn't support
translating 1GB pages in IA-32e paging mode and returns an error to GDB.
This commit adds support for 1GB page translation for IA32e paging.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commits fdfba1a298,
f606604f1c and
2c17449b30 added usages of ENV_GET_CPU()
macro in target-specific code.
Use x86_env_get_cpu() or reuse existing X86CPU variable instead.
Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When we're running in non-64bit mode with qemu-system-x86_64 we can
still end up with virtual addresses that are above the 32bit boundary
if a segment offset is set up.
GNU Hurd does exactly that. It sets the segment offset to 0x80000000 and
puts its EIP value to 0x8xxxxxxx to access low memory.
This doesn't hit us when we enable paging, as there we just mask away the
unused bits. But with real mode, we assume that vaddr == paddr which is
wrong in this case. Real hardware wraps the virtual address around at the
32bit boundary. So let's do the same.
This fixes booting GNU Hurd in qemu-system-x86_64 for me.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
Paolo Bonzini