The acpi_pm1_cnt_init() core function is responsible for setting up the
register block that will ultimately react to S3 and S4 requests (see
acpi_pm1_cnt_write()). It makes sense to advertise this configuration to
the guest firmware via an easy to parse fw_cfg file (ACPI is too complex
for firmware to parse), and indeed PIIX4 does that. However, since
acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg
file.
This patch makes "etc/system-states" appear on all chipsets modified in
the previous patch, not just PIIX4 (assuming they have fw_cfg at all).
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This patch only modifies the function prototype and updates all chipset
code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and
disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled".
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Drop superfluous pc-dimm alignment on hot-pluggable mem
range size assert, since it causes QEMU crash during hotplug
when hotplugging pc-dimm with alignment bigger than
an alignment of hot-pluggable mem range size.
Instead allow pc_dimm_get_free_addr() find free address
and bail out gracefully later in that function during
checking if pc-dimm will fit in hot-pluggable mem range.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.
Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The bios does not index the pxb slot number when
it computes the IRQ because it resides on bus 0
and not on the current bus.
However Qemu routes the irq through bus 0 and adds
the pxb slot to the IRQ computation of the PXB device.
Synchronize between bios and Qemu by canceling
pxb's effect.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The bios looks for 'etc/extra-pci-roots' to decide if
is going to scan further buses after bus 0 tree.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PXB is a "light-weight" host bridge whose purpose is to enable
the main host bridge to support multiple PCI root buses
for pc machines.
As oposed to PCI-2-PCI bridge's secondary bus, PXB's bus
is a primary bus and can be associated with a NUMA node
(different from the main host bridge) allowing the guest OS
to recognize the proximity of a pass-through device to
other resources as RAM and CPUs.
The PXB is composed from:
- A primary PCI bus (can be associated with a NUMA node)
Acts like a normal pci bus and from the functionality point
of view is an "expansion" of the bus behind the
main host bridge.
- A pci-2-pci bridge behind the primary PCI bus where the actual
devices will be attached.
- A host-bridge PCI device
Situated on the bus behind the main host bridge, allows
the BIOS to configure the bus number and IO/mem resources.
It does not have its own config/data register for configuration
cycles, this being handled by the main host bridge.
- A host-bridge sysbus to comply with QEMU current design.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Use the newer pci_bus_num to correctly get the root bus number.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PXB buses are assumed to be children of bus 0. Look for them
while scanning the buses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Removed the assumption that the root bus does not
have a parent device because is specific only
to the default class implementation.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Commit 68e6b0af7 (acpi: add aml_while() term) added
the definition of aml_while without the actual implementation.
Implement the term.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add a new API named acpi_send_gpe_event() to send hotplug SCI.
This API can be used by pci, cpu and memory hotplug.
This patch is rebased on master.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Commit "019a3ed virtio: make features 64bit wide" missed a few changes,
as I've noticed while trying to rebase the virtio-1 branch to latest
master. This patch adds them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Failure was included on commit
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should validate the vq index against nvqs_with_notifiers. Otherwise we may
try to mask or unmask vector for vqs without notifiers (e.g control vq). This
will lead qemu abort on kvm_irqchip_commit_routes() when trying to boot win8.1
guest.
Fixes 851c2a75a6 ("virtio-pci: speedup MSI-X
masking and unmasking")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In DSDT FDC0 declares the IO region as IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04).
Use the same in lpc_ich9 initialization code.
Now the floppy drive is detected correctly on Windows.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 5cb18b3d7b
TPM2 ACPI table support
was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
hex files).
Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A bunch of cleanups and fixes all over the place,
enhancements in TPM, virtio and vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVbE3kAAoJECgfDbjSjVRphV4H/jEnq16oMP72H6xgbAIKjvrP
uEx4jgkj9qGfgqLQJURPKemgzNbP+dXjd4LkIdgbUvlknCgFeKyJVPxzCCIhjc7R
5D70Aptg1CdVNaMeqsIOyJIYe0hIXQjbF7a/jtxf8nR9+kLIOpcQ200oRJtxpGVu
VfzWnBj48PRXi/W03OinWYrkqeAqx0BNHRxXQ5Ylr/DxTBoJKmmp13wW/5U+Xtmi
g5hDS5IF/qqrIKftisR7sDEfXENJf3ZulqP/2N8Lvufyj1lQxGkEGTKD5FDzeaj6
X0/UvUv7I2OzCbcTyeCwzF1GfZOgGceiXxopEp359SkvyoJILF7/C0Na5LY/fiw=
=fckd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, tpm, virtio, vhost enhancements and fixes
A bunch of cleanups and fixes all over the place,
enhancements in TPM, virtio and vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jun 1 13:19:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (60 commits)
vhost-user: add multi queue support
virtio: make features 64bit wide
qdev: add 64bit properties
virtio-mmio: ioeventfd support
hw/acpi/aml-build: Fix memory leak
acpi: add aml_while() term
acpi: add aml_increment() term
acpi: add aml_shiftright() term
acpi: add aml_shiftleft() term
acpi: add aml_index() term
acpi: add aml_lless() term
acpi: add aml_add() term
TPM2 ACPI table support
tpm: Probe for connected TPM 1.2 or TPM 2
Extend TPM TIS interface to support TPM 2
Add stream ID to MSI write
acpi: Simplify printing to dynamic string
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
i386/pc_q35: don't insist on board FDC if there's no default floppy
i386/pc: '-drive if=floppy' should imply a board-default FDC
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make features 64bit wide everywhere.
On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons. That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed for virtio features which go from 32bit to 64bit with virtio 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
set_host_notifier and set_guest_notifiers supported by virtio-mmio now.
Most code copied from virtio-pci.
This makes it possible to use vhost-net with virtio-mmio,
improving performance by about 30%.
The kvm-arm does not yet support irqfd, need to fix the hard-coded part after
kvm-arm gets irqfd support.
Signed-off-by: Ying-Shiuan Pan <yingshiuan.pan@gmail.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add encoding for ACPI DefWhile Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefIncrement Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefShiftRight Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefShiftLeft Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefIndex Opcode.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefLLess Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefAdd Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PvTG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bkoppelmann/tags/pull-tricore-20150530' into staging
TriCore bugfixes
# gpg: Signature made Sat May 30 15:50:49 2015 BST using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
* remotes/bkoppelmann/tags/pull-tricore-20150530:
target-tricore: fix BOL_ST_H_LONGOFF using ld
target-tricore: fix msub32_q producing the wrong overflow bit
target-tricore: fix OPC2_32_RR_DVINIT_HU having write before use on the result
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the TPM passthrough backend driver, modify the probing code so
that we can check whether a TPM 1.2 or TPM 2 is being used
and adapt the behavior of the TPM TIS accordingly.
Move the code that tested for a TPM 1.2 into tpm_utils.c
and extend it with test for probing for TPM 2. Have the
function return the version of TPM found.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.
TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):
- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.
Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus.
This patch implements passing these IDs in qemu.
SMMU is also known to use stream IDs, therefore this addition can also be useful for
implementing platforms with SMMU.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Changes from v1:
- Added bus number to the stream ID
- Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into
msi_send_message() function.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_append_namestringv() and aml_string() first calculate the
resulting string's length with vsnprintf(NULL, ...), then allocate,
then print for real. Simply use g_strdup_vprintf() or g_vasprintf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern
Machine type.
Hence, let us not instantiate the FDC when all of the following apply:
- the machine type is pc-q35-2.4 or later,
- "-device isa-fdc" is not passed on the command line (nor in the config
file),
- no "-drive if=floppy,..." is requested.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The "no_floppy = 1" machine class setting causes "default_floppy" in
main() to become zero. Consequently, default_drive() will not call
drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no
default floppy drive will be created for the virtual machine. In that
case, board code should also not insist on the creation of the
board-default FDC.
The board-default FDC will still be created if the user requests a floppy
drive with "-drive if=floppy".
Additionally, separate FDCs can be specified manually with "-device
isa-fdc". They allow the
-device isa-fdc,driveA=...
syntax that is more flexible than the one required by the board-default
FDC:
-global isa-fdc.driveA=...
This patch doesn't change the behavior observably, as all Q35 machine
types have "no_floppy = 0".
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Even if board code decides not to request the creation of the FDC (keyed
off board-level factors, to be determined later), we should create the FDC
nevertheless if the user passes '-drive if=floppy' on the command line.
Otherwise '-drive if=floppy' would break without explicit '-device
isa-fdc' on such boards.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch introduces no observable change, but it allows the callers of
pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or
not request) the creation of the FDC explicitly.
At the moment both callers pass constant create_fdctrl=true (hence no
observable change).
Assuming a board passes create_fdctrl=false, "floppy" will be NULL on
output, and (beyond the FDC not being created) that NULL will be passed on
to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Increase the queue limit to 1024. But virtio-ccw and s390-virtio won't
support this, this is done through failing device_plugged() for those
two transports if the number of virtqueues is greater than 64.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Laszlo Ersek