Commit Graph

45 Commits

Author SHA1 Message Date
Gonglei 3ad9fd5a25 target-mips: fix memory leak
Coveristy reports that variable prom_buf/params_buf going
out of scope leaks the storage it points to.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:06:17 +03:00
Dirk Müller 6a926fbc6f mips: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.

Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.

Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.

Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-Id: <CAL5wTH4-=HJUvwBu+2o6jGanJesJOyNf3sL8-5+d_-6C3cWBfA@mail.gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-25 14:35:31 +01:00
Markus Armbruster 07dc788054 parallel: Factor out common parallel_hds_isa_init()
Maintainers of affected machines cc'ed.

Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24 00:19:06 +01:00
Markus Armbruster b6607a1a20 serial: Factor out common serial_hds_isa_init()
It's the same old loop copied five times, plus another instance where
it's clipped to two iterations and unrolled.

No external users of serial_isa_init() are left, so give it internal
linkage.

Maintainers of affected machines cc'ed.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24 00:19:06 +01:00
Peter Maydell 8f4699d873 Block patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJURPo5AAoJEH8JsnLIjy/WK1gP/2PhKD4lsjQ0O9TYlwu2aWCc
 eej/z2wp47996KAkhRgS4mf/E0FnPSh80cHV1wobPJfRSTPPNuGgrmhX+HLcjlPz
 fWb3qN6Ikneou1TYCO/r1wMwhPpE1GKjZmuHQcH3B27GW5cqx/s1sPCxqwDJJnYq
 oBbbcIGZGNYLHlyJvl88gBTkIHBs5/nxhzVnPnpQi6JqtGz8CAbo6e36A5RQCqyV
 RoYEe5Lif81lZpaTpYFsoUhOcH9YtQnKoUSdAnqtXtLO9fOHsn7/75hnmT4bs5CR
 p6UAiutN+jiUcRrlF//TK5TNlS7KvOAf+LirEURAY0j5IJNXh30/5x8hXzHJxb60
 eY6ePrhnbkPeLfg1Qh/7LJyi/W0cl2YN6I2oslnMUfcumu9Ns1FfsFrFpKtgT/yM
 fkjQEo7w9khKT+iZaOm1XaNDliUKZiG2wLhni6KYAGM2edmE8W7VCkjSTFcz/4eQ
 vn7G3T1OnglW1cSt0onTAKNWn2swh0lXOXv7iBupmiNoy+hafNwTa1eHw+jjvXeF
 3WdfMxT6fRKAQUC/hwVlvyeJcZyBMG11BuovX9gNgdx5/UpWJFjxHsEmbiP9TtkO
 CJ5dGi+PgM/fxLJj4IW0zSVSL+mnhQmQdtzksU+l4GBHuErXdkt9W61sOHHQJGTf
 NGIkh6DwV4VfFZd6bzf0
 =8BaC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches

# gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (28 commits)
  block: Make device model's references to BlockBackend strong
  block: Lift device model API into BlockBackend
  blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend
  block/qapi: Convert qmp_query_block() to BlockBackend
  blockdev: Fix blockdev-add not to create DriveInfo
  blockdev: Drop superfluous DriveInfo member id
  pc87312: Drop unused members of PC87312State
  ide: Complete conversion from BlockDriverState to BlockBackend
  hw: Convert from BlockDriverState to BlockBackend, mostly
  virtio-blk: Rename VirtIOBlkConf variables to conf
  virtio-blk: Drop redundant VirtIOBlock member conf
  block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
  block: Rename BlockDriverAIOCB* to BlockAIOCB*
  block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
  block: Merge BlockBackend and BlockDriverState name spaces
  block: Eliminate BlockDriverState member device_name[]
  block: Eliminate bdrv_iterate(), use bdrv_next()
  blockdev: Eliminate drive_del()
  block: Make BlockBackend own its BlockDriverState
  block: Code motion to get rid of stubs/blockdev.c
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-22 16:39:49 +01:00
Markus Armbruster 4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster fa1d36df74 block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
The patch is big, but all it really does is replacing

    dinfo->bdrv

by

    blk_bs(blk_by_legacy_dinfo(dinfo))

The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).

Line wrapping muddies the waters a bit.  I also omit tests whether
dinfo->bdrv is null, because it never is.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Leon Alrae 9fba150042 mips_malta: update malta's pseudo-bootloader - replace JR with JALR
JR has been removed in R6 and now this instruction will cause Reserved
Instruction Exception. Therefore use JALR with rd=0 which is equivalent to JR.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14 13:28:52 +01:00
John Snow d8f94e1bb2 ide: Update ide_drive_get to be HBA agnostic
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.

This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.

Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03 10:30:33 +01:00
Hu Tao 49946538d2 memory: add parameter errp to memory_region_init_ram
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:41:43 +02:00
James Hogan f7f152458e mips_malta: Catch kernels linked at wrong address
Add error reporting if the wrong type of kernel is provided for the
current mode of acceleration.

Currently a KVM kernel linked at 0x40000000 can't be used with TCG, and
a normal kernel linked at 0x80000000 can't be used with KVM.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:08 +02:00
James Hogan fbdb1d9555 mips_malta: Remove incorrect KVM T&E references
Fix the error message and code comments relating to KVM not supporting
booting from the flash mapping when no kernel is provided. The issue is
a general MIPS KVM issue and isn't specific to the Trap & Emulate
version of MIPS KVM.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:08 +02:00
Peter Maydell d70a319b8d Merge remote-tracking branch 'remotes/kvm/uq/master' into staging
* remotes/kvm/uq/master:
  hw/mips: malta: Don't boot from flash with KVM T&E
  MAINTAINERS: Add entry for MIPS KVM
  target-mips: Enable KVM support in build system
  hw/mips: malta: Add KVM support
  hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
  target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
  target-mips: kvm: Add main KVM support for MIPS
  kvm: Allow arch to set sigmask length
  target-mips: get_physical_address: Add KVM awareness
  target-mips: get_physical_address: Add defines for segment bases
  hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
  hw/mips/cputimer: Don't start periodic timer in KVM mode
  target-mips: Reset CPU timer consistently
  KVM: Fix GSI number space limit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-20 19:25:18 +01:00
James Hogan 3c5d0be553 hw/mips: malta: Don't boot from flash with KVM T&E
In KVM trap & emulate (T&E) mode the flash reset region at 0xbfc00000
isn't executable, which is why the minimal kernel bootloader is loaded
and executed from the last 1MB of DRAM instead.

Therefore if no kernel is provided on the command line and KVM is
enabled, exit with an error since booting from flash will fail.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-20 13:51:29 +02:00
Igor Mammedov 781bbd6bec pc: add acpi-device link to PCMachineState
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:51 +03:00
James Hogan b03118114d hw/mips: malta: Add KVM support
In KVM mode the bootrom is loaded and executed from the last 1MB of
DRAM.

Based on "[PATCH 12/12] KVM/MIPS: General KVM support and support for
SMP Guests" by Sanjay Lal <sanjayl@kymasys.com>.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 16:59:19 +02:00
Paolo Bonzini 0983979b3a hw: use ld_p/st_p instead of ld_raw/st_raw
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation.  Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:04:17 +02:00
Marcel Apfelbaum 3ef9622182 machine: Conversion of QEMUMachineInitArgs to MachineState
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.

All the other changes are only mechanical refactoring, no semantic changes.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:35:01 +02:00
Andreas Färber a5c828525e i2c: Rename i2c_bus to I2CBus
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 16:22:31 +01:00
Paul Burton 94c2b6aff4 mips_malta: support up to 2GiB RAM
A Malta board can support up to 2GiB of RAM. Since the unmapped kseg0/1
regions are only 512MiB large & the latter 256MiB of those are taken up
by the IO region, access to RAM beyond 256MiB must be done through a
mapped region. In the case of a Linux guest this means we need to use
highmem.

The mainline Linux kernel does not support highmem for Malta at this
time, however this can be tested using the linux-mti-3.8 kernel branch
available from:

  git://git.linux-mips.org/pub/scm/linux-mti.git

You should be able to boot a Linux kernel built from the linux-mti-3.8
branch, with CONFIG_HIGHMEM enabled, using 2GiB RAM by passing "-m 2G"
to QEMU and appending the following kernel parameters:

  mem=256m@0x0 mem=256m@0x90000000 mem=1536m@0x20000000

Note that the upper half of the physical address space of a Malta
mirrors the lower half (hence the 2GiB limit) except that the IO region
(0x10000000-0x1fffffff in the lower half) is not mirrored in the upper
half. That is, physical addresses 0x90000000-0x9fffffff access RAM
rather than the IO region, resulting in a physical address space
resembling the following:

  0x00000000 -> 0x0fffffff  RAM
  0x10000000 -> 0x1fffffff  I/O
  0x20000000 -> 0x7fffffff  RAM
  0x80000000 -> 0x8fffffff  RAM (mirror of 0x00000000 -> 0x0fffffff)
  0x90000000 -> 0x9fffffff  RAM
  0xa0000000 -> 0xffffffff  RAM (mirror of 0x20000000 -> 0x7fffffff)

The second mem parameter provided to the kernel above accesses the
second 256MiB of RAM through the upper half of the physical address
space, making use of the aliasing described above in order to avoid
the IO region and use the whole 2GiB RAM.

The memory setup may be seen as 'backwards' in this commit since the
'real' memory is mapped in the upper half of the physical address space
and the lower half contains the aliases. On real hardware it would be
typical to see the upper half of the physical address space as the alias
since the bus addresses generated match the lower half of the physical
address space. However since the memory accessible in the upper half of
the physical address space is uninterrupted by the IO region it is
easiest to map the RAM as a whole there, and functionally it makes no
difference to the target code.

Due to the requirements of accessing the second 256MiB of RAM through
a mapping to the upper half of the physical address space it is usual
for the bootloader to indicate a maximum of 256MiB memory to a kernel.
This allows kernels which do not support such access to boot on systems
with more than 256MiB of RAM. It is also the behaviour assumed by Linux.
QEMUs small generated bootloader is modified to provide this behaviour.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-09 18:42:22 +02:00
Markus Armbruster c165473269 hw: Clean up bogus default boot order
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.

Machines that care:

* pc and its variants

  Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
  'c', 'd' and 'n'.  Reject all others (fatal with -boot).

* nseries (n800, n810)

  Check whether order starts with 'n'.  Silently ignored otherwise.

* prep, g3beige, mac99

  Extract the first character the machine understands (subset of
  'a'..'f').  Silently ignored otherwise.

* spapr

  Accept an arbitrary string (vl.c restricts it to contain only
  'a'..'p', no duplicates).

* sun4[mdc]

  Use the first character.  Silently ignored otherwise.

Strip characters these machines ignore from their default boot order.

For all other machines, remove the unused default boot order
alltogether.

Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:16:47 +03:00
Aurelien Jarno cc413a3935 mips_malta: do not raise exceptions when accessing invalid memory
Since commit c658b94f6e, MIPS raises
exceptions when accessing invalid memory. This is not the correct
behaviour for MIPS Malta Core LV, as the GT-64120A system controller
just ignore undecoded access. This feature is used by the Linux kernel
to probe for some devices.

Emulate the correct behaviour in QEMU by adding an empty slot covering
the entire memory space decoded by the GT-64120A.

Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-14 16:47:30 +02:00
Aurelien Jarno 2e985fe000 mips: revert commit b332d24a8e
Now that this code path is not triggered anymore during the tests,
revert commit b332d24a8e. Booting a MIPS
target without kernel nor bios doesn't really make sense. At the same
time replace fprintf(stderr, ...) by error_report().

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-08 23:06:15 +02:00
Andreas Färber 2c57bd9b06 mips_malta: Silence BIOS loading warning for qtest
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375106733-832-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30 18:48:22 -05:00
Aurelien Jarno f05d4d94d6 mips_malta: fix copy of the 0x1fc00000 region
Copy the whole 0x1fe000000 region into 0x1fc00000, independently of the
loaded BIOS size. This fix the MIPS make check tests.

Reported-by: Andreas Färber <afaerber@suse.de>
Tested-by: Andreas Färber <afaerber@suse.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29 07:48:09 +02:00
James Hogan 05b3274b6b hw/mips: align initrd to 64KB to avoid kernel error
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29 00:27:35 +02:00
Paul Burton 35c648078a mips_malta: generate SMBUS EEPROM data
The malta contains 2 EEPROMs, one containing SPD data for the SDRAM and
another containing board information such as serial number and MAC
address. These are both exposed via the PIIX4 SMBUS. Generating this
data and providing it to smbus_eeprom_init will allow YAMON to read a
serial number for the board and prevent it from warning that the EEPROM
data is invalid.

We already have the contents of the SPD EEPROM which are exposed via
FPGA I2C accesses, this is provided as part of the SMBUS EEPROM data
too for consistency.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:59:23 +02:00
Paul Burton 1817f56a83 mips_malta: cap BIOS endian swap length at 0x3e0000 bytes
This preserves the final sector of the pflash which is used by YAMON to
hold environment variables. If the endianness of the environment data
is swapped then YAMON will fail to load environment variables from
pflash.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:59:23 +02:00
Paul Burton 02bccc7796 mips_malta: generate SPD EEPROM data at runtime
The SPD EEPROM specifies the amount of memory present in the system and
thus its correct contents can only be known at runtime. Calculating
parts of the data on init allows the data to accurately reflect the
amount of target memory present and allow YAMON to boot with an
arbitrary amount of SDRAM.

Where possible the SPD data will favor indicating 2 banks of SDRAM
rather than 1. For example the default 128MB of target memory will be
represented as 2x64MB banks rather than 1x128MB bank. This allows
versions of MIPS BIOS code (such as YAMON 2.22 and older) to boot
despite a bug preventing them from handling a single bank of SDRAM with
the Galileo GT64120 system controller emulated by QEMU.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:59:22 +02:00
Paul Burton a427338b22 mips_malta: correct reading MIPS revision at 0x1fc00010
Rather than modifying the BIOS code at its original location, copy it
for the 0x1fc00000 region & modify the copy. This means the original
ROM code is correctly readable at 0x1e000010 whilst the MIPS revision
is readable at 0x1fc00010.

Additionally the code previously operated on target memory which would
later be overwritten by the BIOS image upon CPU reset if the -bios
argument was used to specify the BIOS image. This led to the written
MIPS revision being lost. Copying using rom_copy when -bios is used
fixes this issue.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:53:35 +02:00
Paul Burton a2b8813d62 mips_malta: fix BIOS endianness swapping
If the target is little endian (mipsel) then the BIOS image endianness
is swapped so that the big endian BIOS binaries commonly produced can be
loaded correctly.

When using the -bios argument the BIOS is loaded using
load_image_targphys, however this doesn't perform the load to target
memory immediately. Instead it loads the BIOS file into a struct Rom
which will later be written to target memory upon reset. However the
endianness conversion was being performed before this, on init, and
operating on the target memory which at this point is blank & will later
be overwritten by the (big endian) BIOS image. Correct this by operating
on the data referenced by struct Rom rather than the target memory when
the -bios argument is used.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:18:07 +02:00
Andreas Färber cba5cb67be mips_malta: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 18:57:47 +02:00
Paolo Bonzini b332d24a8e mips: degrade BIOS error to warning
No free MIPS BIOS is available, so it makes little sense to quit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-19-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25 08:12:27 -05:00
Andreas Färber 182735efaf cpu: Make first_cpu and next_cpu CPUState
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:32:54 +02:00
Andreas Färber 4917cf4432 cpu: Replace cpu_single_env with CPUState current_cpu
Move it to qom/cpu.h.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Anthony Liguori dc11549ec2 pci,misc enhancements
This includes some pci enhancements:
 
 Better support for systems with multiple PCI root buses
 FW cfg interface for more robust pci programming in BIOS
 Minor fixes/cleanups for fw cfg and cross-version migration -
     because of dependencies with other patches
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
 gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
 PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
 nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
 aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
 2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
 =gxxc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci,misc enhancements

This includes some pci enhancements:

Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
    because of dependencies with other patches

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  pci: Fold host_buses list into PCIHostState functionality
  pci: Remove domain from PCIHostBus
  pci: Simpler implementation of primary PCI bus
  pci: Add root bus parameter to pci_nic_init()
  pci: Add root bus argument to pci_get_bus_devfn()
  pci: Replace pci_find_domain() with more general pci_root_bus_path()
  pci: Use helper to find device's root bus in pci_find_domain()
  pci: Abolish pci_find_root_bus()
  pci: Move pci_read_devaddr to pci-hotplug-old.c
  pci: Cleanup configuration for pci-hotplug.c
  pvpanic: fix fwcfg for big endian hosts
  pvpanic: initialization cleanup
  MAINTAINERS: s/Marcelo/Paolo/
  e1000: cleanup process_tx_desc
  pc_piix: cleanup init compat handling
  pc: pass PCI hole ranges to Guests
  pci: store PCI hole ranges in guestinfo structure
  range: add Range structure

Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-08 08:00:23 -05:00
David Gibson 29b358f93a pci: Add root bus parameter to pci_nic_init()
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root.  As we add support for
multiple PCI roots, that may no longer be the case.  This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters.  NICs created new-style, with
-device can of course be put anywhere.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07 23:10:57 +03:00
Paolo Bonzini 2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Andreas Färber 60a3e17a46 cpu: Change cpu_exit() argument to CPUState
It no longer depends on CPUArchState, so move it to qom/cpu.c.

Prepares for changing GDBState::c_cpu to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28 13:25:12 +02:00
Michael Tokarev 997aba8e25 remove some double-includes
Some source files #include the same header more than
once for no good reason.  Remove second #includes in
such cases.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-18 16:35:12 +04:00
Paolo Bonzini b3e6d591b0 audio: enable PCI audio cards for all PCI-enabled targets
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:17:06 -05:00
Paolo Bonzini f81222bc0c audio: look for the ISA and PCI buses
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-8-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:16:57 -05:00
Paolo Bonzini dccfcd0e5f sysemu: avoid proliferation of include/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 18:19:25 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Paolo Bonzini 530182169e hw: move boards and other isolated files to hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 15:01:19 +01:00