This fixes a compiler error when QEMU was configured with --enable-debug.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On 64bit capable systems, MAS2 can actually hold a 64bit virtual page
address. So increase the mask for its EPN.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MAS registers on BookE are all 32 bit wide, except for MAS2, which
can hold up to 64 bit on 64 bit capable CPUs. Reflect this in the SPR
setting code, so that the guest can never write invalid values in them.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves the debug #ifdef'ed SPR trace generation into its
own function, so we can call it from multiple places.
Signed-off-by: Alexander Graf <agraf@suse.de>
IVPR can either hold 32 or 64 bit addresses, depending on the CPU type. Let
the CPU initialization function pass in its mask itself, so we can easily
extend it.
Signed-off-by: Alexander Graf <agraf@suse.de>
On the e500 series, accessing SPR_EPR magically turns into an access at
that CPU's IACK register on the MPIC. Implement that logic to get kernels
that make use of that feature work.
Signed-off-by: Alexander Graf <agraf@suse.de>
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to
support running 64bit code with MSR_CM set.
Signed-off-by: Alexander Graf <agraf@suse.de>
The number of SPRs avaiable in different PowerPC chip is still increasing. Add
definitions for the MAS7_MAS3 SPR and all currently known bits in EPCR.
Signed-off-by: Alexander Graf <agraf@suse.de>
More recent Power server chips (i.e. based on the 64 bit hash MMU)
support more than just the traditional 4k and 16M page sizes. This
can get quite complicated, because which page sizes are supported,
which combinations are supported within an MMU segment and how these
page sizes are encoded both in the SLB entry and the hash PTE can vary
depending on the CPU model (they are not specified by the
architecture). In addition the firmware or hypervisor may not permit
use of certain page sizes, for various reasons. Whether various page
sizes are supported on KVM, for example, depends on whether the PR or
HV variant of KVM is in use, and on the page size of the memory
backing the guest's RAM.
This patch adds information to the CPUState and cpu defs to describe
the supported page sizes and encodings. Since TCG does not yet
support any extended page sizes, we just set this to NULL in the
static CPU definitions, expanding this to the default 4k and 16M page
sizes when we initialize the cpu state. When using KVM, however, we
instead determine available page sizes using the new
KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use
some defaults, with some guesswork which should do the right thing for
existing HV and PR implementations. The fallback might not be correct
for future versions, but that's ok, because they'll have
KVM_PPC_GET_SMMU_INFO.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The size of EPN field in MAS2 depends on page size. This patch adds a
mask to discard invalid bits in EPN field.
Definition of EPN field from e500v2 RM:
EPN Effective page number: Depending on page size, only the bits
associated with a page boundary are valid. Bits that represent offsets
within a page are ignored and should be cleared.
There is a similar (but more complicated) definition in PowerISA V2.06.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Lookup table 'hbrev' is never written to, so add a 'const' qualifier.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more misc helpers from helper.c to misc_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move misc helpers from op_helper.c to misc_helpers.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move decrementer and timebase helpers to a dedicated file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove useless wrappers. In some cases 'int' parameters are
changed to uint32_t.
Make internal functions static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix kvm compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move more MMU helpers from helper.c to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[update to current helper.c state]
Signed-off-by: Alexander Graf <agraf@suse.de>
When the code is moved together by the next patch, compiler
detects a possible uninitialized variable use. Avoid the warning
by initializing the variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move MMU, TLB, SLB and BAT ops to mmu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[fix unwanted whitespace line in Makefile.target]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move integer and vector ops to int_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move FPU and SPE helpers from op_helper.c to fpu_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move exception helpers from helper.c to excp_helper.c and
make cpu_dump_rfi() static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
helper.c will be spilt by the next patches, fix
style issues before that.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Move exception helpers from op_helper.c to excp_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
op_helper.c will be split by the next patches, fix
style issues before that.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The file is located in target-ppc/, not hw/.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Adapt e500 mpc8544ds machine accordingly.
Turn cpu_init() into a static inline function returning CPUPPCState for
backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
When initializing the e500 code, we need to expose its
cache line size for user and system mode, while the mmu
details are only interesting for system emulation.
Split the 2 switch statements apart, allowing us to #ifdef
out the mmu parts for user mode emulation while keeping all
cache information consistent.
Signed-off-by: Alexander Graf <agraf@suse.de>
machine.c is only compiled for softmmu targets, so checks for
!defined(CONFIG_USER_ONLY) are unnecessary and can be dropped.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[AF: Use more verbose commit message suggested by PMM]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit f7aa558396 pulled the dcache and icache
line size initialization inside of a '#if !defined(CONFIG_USER_ONLY)' block.
This is not correct because instructions like 'dcbz' need the dcache size
initialized even for user mode.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
[AF: Simplify #ifdefs by using cache line size 32 for *-user as before]
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code from cpu_state_reset() into ppc_cpu_reset().
Reorder #include of helper_regs.h to use it in translate_init.c.
Adjust whitespace and add braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Move code not dependent on ppc_def_t from cpu_ppc_init() into an initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Embed CPUPPCState as first member of PowerPCCPU.
Distinguish between "powerpc-cpu", "powerpc64-cpu" and
"embedded-powerpc-cpu".
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
On target-ppc, our table of CPU types and features encodes the features as
found on the hardware, regardless of whether these features are actually
usable under TCG or KVM. We already have cases where the information from
the cpu table must be fixed up to account for limitations in the emulation
method we're using. e.g. TCG does not support the DFP and VSX instructions
and KVM needs different numbering of the CPUs in order to tell it the
correct thread to core mappings.
This patch cleans up these hacks to handle emulation limitations by
consolidating them into a pair of functions specifically for the purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Style and typo fixes, rename new functions and drop ppc_def_t arg]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Stefan Weil