This target was not updated with 7ecd02a06f, and so did
not allow re-compilation with relocation overflow.
Remove reloc_26 and reloc_26_val as unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Re-use the 256MiB region handling from alloc_code_gen_buffer_anon,
and replace that with the shared file mapping.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 7ecd02a06f, we are prepared to re-start code generation
with a smaller TB if a relocation is out of range. We no longer
need to leave a nop in the stream Just In Case.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The offset even checks were folded into the range check incorrectly.
By offsetting by 1, and not decrementing the width, we silently
allowed out of range branches.
Assert that the offset is always even instead. Move tcg_out_goto
down into the CONFIG_SOFTMMU block so that it is not unused.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_tbrel_diff when we need a displacement to a label,
and with a NULL argument when we need the normalizing addend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The maximum TB code gen size is UINT16_MAX, which the current
code does not support. Use our utility function to optimally
add an arbitrary constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_tbrel_diff when we need a displacement to a label,
and with a NULL argument when we need the normalizing addend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo generated a branch-and-link insn instead of plain branch.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This produces a small pc-relative displacement within the
generated code to the TB structure that preceeds it.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cribbed from code posted by Joelle van Dyne <j@getutm.app>,
and rearranged to a cleaner structure.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We cannot use a real temp file, because we would need to find
a filesystem that does not have noexec enabled. However, a
memfd is not associated with any filesystem.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Plumb the value through to alloc_code_gen_buffer. This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Report better error messages than just "could not allocate".
Let alloc_code_gen_buffer set ctx->code_gen_buffer_size
and ctx->code_gen_buffer, and simply return bool.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass both rx and rw addresses to tb_target_set_jmp_target.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the arguments to always use s->code_ptr instead of
take it as an argument. That makes it easy to ensure that
the value_ptr is always the rx version.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change TCGLabel.u.value_ptr to const, and initialize it with
tcg_splitwx_to_rx. Propagate const through tcg/host/ only
as far as needed to avoid errors from the value_ptr change.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two helper functions, using a global variable to hold
the displacement. The displacement is currently always 0,
so no change in behaviour.
Begin using the functions in tcg common code only.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create a function to determine if a pointer is within the buffer.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.
Use the correct function pointer type, and name the variable
tcg_qemu_tb_exec, which means that we are able to remove the
macro that does the casting.
Replace HAVE_TCG_QEMU_TB_EXEC with CONFIG_TCG_INTERPRETER,
as this is somewhat clearer in intent.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For darwin, the CTR_EL0 register is not accessible, but there
are system routines that we can use.
For other hosts, copy the single pointer implementation from
libgcc and modify it to support the double pointer interface
we require. This halves the number of cache operations required
when split-rwx is enabled.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are shortly going to have a split rw/rx jit buffer. Depending
on the host, we need to flush the dcache at the rw data pointer and
flush the icache at the rx code pointer.
For now, the two passed pointers are identical, so there is no
effective change in behaviour.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is currently a no-op within tci/tcg-target.h, but
is about to be moved to a more generic location.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_try_memalign() expects a power of 2 alignment:
- posix_memalign(3):
The address of the allocated memory will be a multiple of alignment,
which must be a power of two and a multiple of sizeof(void *).
- _aligned_malloc()
The alignment value, which must be an integer power of 2.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201021173803.2619054-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need or want to be allocating page sized quanta.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201018164836.1149452-1-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable this on i386 to restrict the set of input registers
for an 8-bit store, as required by the architecture. This
removes the last use of scratch registers for user-only mode.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always true when movbe is available, otherwise leave
this to generic code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes the build for older ppc64 kernel headers.
Fixes: 6addf06a3c
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- include ccache in Debian 10 docker image
- iotests: drop 312 from auto group
- bound reading of s390x framebuffer file
- cirrus: drop non-x86 tests so we complete
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl/18+IACgkQ+9DbCVqe
KkQh6Qf/TUHYf/eSCXIdMEE6Zim9DKFCzWqkhdfOd4n/59SirxhnrvUh27BZVKhb
LW/W5Q+UZ+kYCjwRG231+S9kWp5Cr/FTVm+l/77le7dDaBOU9RzpK0cCCXv4OFsZ
DztiLfv869lDe0URHs4yk9TSu9u5DfqVcvrSiWvr7SeGW7QBW9BpdeibY9OmEVUU
d0io0ueEMq7iRHwIAanfuqc2tbh94jDhg3SK7Lc2cIf9iyhonDcEY2aweNk8k/Kd
p5QceiUcsz8FaLPQYQRhQxjxvZoFqQqMwP7NpyltbkHYU69Mh633v424/Dz67oqt
4Mq0JHgPMfKAbPAWlib4f06dSLkHAg==
=pbhj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-060121-4' into staging
Testing updates (back to green)
- include ccache in Debian 10 docker image
- iotests: drop 312 from auto group
- bound reading of s390x framebuffer file
- cirrus: drop non-x86 tests so we complete
# gpg: Signature made Wed 06 Jan 2021 17:31:14 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-060121-4:
cirrus: don't run full qtest on macOS
tests/acceptance: bound the size of readline in s390_ccw_virtio
tests/iotests: drop test 312 from auto group
tests/docker: Include 'ccache' in Debian base image
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cirrus CI macOS build hosts have exhibited a serious performance
degradation in recent months. For example the "qom-test" qtest takes
over an hour for only the qemu-system-aarch64 binary. This is as much
20-40 times slower than other environments. The other qtests all show
similar performance degradation, as do many of the unit tests.
This does not appear related to QEMU code changes, since older git
commits which were known to fully complete in less than 1 hour on
Cirrus CI now also show similar bad performance. Either Cirrus CI
performance has degraded, or an change in its environment has exposed
a latent bug widely affecting all of QEMU. Debugging the qom-test
showed no easily identified large bottleneck - every step of the
test execution was simply slower.
macOS builds/tests run outside Cirrus CI show normal performance.
With an inability to identify any obvious problem, the only viable
way to get a reliably completing Cirrus CI macOS job is to cut out
almost all of the qtests. We choose to run the x86_64 target only,
since that has very few machine types and thus is least badly
impacted in the qom-test execution.
With this change, the macOS jobs complete in approx 35 minutes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210106114159.981538-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The read binary data as text via a PPM export of the frame buffer
seems a bit sketchy and it did blow up in the real world when the
assertion failed:
https://gitlab.com/qemu-project/qemu/-/jobs/943183183
However short of cleaning up the test to be more binary focused at
least limit the attempt to dump the whole file as hexified zeros in
the logs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210105124405.15424-1-alex.bennee@linaro.org>
The "auto" documentation states:
That means they should run with every QEMU binary (also non-x86)
which is not the case as the check-system-fedora build which only
includes a rag tag group of rare and deprecated targets doesn't
support the virtio device required.
Fixes: ef9bba1484 ("quorum: Implement bdrv_co_block_status()")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210105100402.12350-1-alex.bennee@linaro.org>
Include the 'ccache' package to speed up compilation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201213211601.253530-1-f4bug@amsat.org>
Fixes: d6db2a1cdf ("docker: add debian-buster-arm64-cross")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The sun4m board code connects both of the IRQ outputs of each ESCC to the
same slavio input qemu_irq. Connecting two qemu_irqs outputs directly to the
same input is not valid as it produces subtly wrong behaviour (for instance
if both the IRQ lines are high, and then one goes low, the PIC input will see
this as a high-to-low transition even though the second IRQ line should still
be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20201219111934.5540-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Richard Henderson