This provides the UI support for the qemu-vdagent channel which allows
clipboard sharing with VNC graphics (see previous commit for more
information).
The channel name in the device list was changed slightly in order to
avoid confusion. Due to the fact that both the spice-vdagent and the
qemu-vdagent specify the same virtio name (com.redhat.spice.0), both of
these channels were showing up in the device list as "Channel spice",
which is a bit confusing.
In order to disambiguate these, channels now show up in the device list
as "Channel {type} ({name})" instead of "Channel {name}". So for
example, a qemu-vdagent channel would show up as:
Channel Qemu vdagent (spice)
Whereas a spice-vdagent channel would show up as:
Channel Spice agent (spice)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
- Remove most use of deprecated stock icons. Without it the UI will
be a lot more ugly in Fedora 36
- Remove deprecated ImageMenuItem usage, convert to regular MenuItem
- Remove most embedded button images
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Split out tpmdetails.py, following the pattern of fsdetails.py. This
adds more UI editing fields for an already attached TPM.
Move the model and version under an 'Advanced options' expander,
since we should be getting this correct by default.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
It creates a lot of churn.
Adjust phantom grid rows + columns while we are at it, not sure why
those counts are suddenly wrong
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virtiofs in domcapabilities is used as a proxy to tell us whether
libvirt is new enough to allow bare memory access mode=shared', So We
enable/disable this checkbox according to it.
When we configure shared memory access, If the 'memfd' is available in
domcaps, We configure VM to use it as memory backend because it doesn't
need addtional host setup for vhost-user devices, Otherwise use 'file'
as backend.
If all of numa nodes explicitly defined memAccess=shared, We mark this
checkbox as checked even if virtiofs isn't exposed in domcapabilities.
In this case:
- It doesn't matter what the value of access mode of memoryBacking is
because access mode of memoryBacking will be overridden per numa node
by memAccess attribute.
- Although the checkbox is disabled, the checked checkbox presents actual
status about shared memory access to users.
Signed-off-by: Lin Ma <lma@suse.com>
Share the UI for changing all these disk properties:
- shareable
- readonly
- removable
- cache
- discard
- detect zeroes
Move them all under the 'Advanced options' expander in details, and
add the checkbox options to the addhardware wizard.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
RAM is rarely changed from the default
heads does not have any explicit virt-manager support
and both are viewable from the XML editor.
So remove the explicit fields for them
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is pretty obscure, and if it's problematic then libvirt
or qemu should be throwing an error or otherwise reporting it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is pretty obscure, and requires a large amount of UI surface
to handle correctly. Users can use the XML editor if they know they
need or want this.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: bus editing: maybe keep this for the customize wizard, but
it should go away for existing disks, changing it for an existing VM is
definitely a 'shoot yourself in the foot' type of thing for most users
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* UI maxmem and maxcpu notions, and related memballoon and cpu hotplug
operations. These have been in the UI forever but I'm not sure people
actually use them. cpu hotplug has always been a mess, and unless the
user plans ahead by setting a high maxmem value ballooning is only good
for reducing memory. These all sound like advanced usage to me that
just confuses the typical usecase of adding more mem or vcpus to an
offline VM. And the hotplug operations with virsh are simple to invoke.
So I'd like to drop this from the UI
"""
The remaining field sets both max and current memory in the
inactive XML
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* UI maxmem and maxcpu notions, and related memballoon and cpu hotplug
operations. These have been in the UI forever but I'm not sure people
actually use them. cpu hotplug has always been a mess, and unless the
user plans ahead by setting a high maxmem value ballooning is only good
for reducing memory. These all sound like advanced usage to me that
just confuses the typical usecase of adding more mem or vcpus to an
offline VM. And the hotplug operations with virsh are simple to invoke.
So I'd like to drop this from the UI
"""
The remaining UI field now sets both maximum and current VCPU
allocation.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* network virtualport configuration: this is some really obscure
stuff for configuring VEPA for macvtap devices. I don't think it gets
any usage in practice. I think a smaller subset of this UI is shared
with openswitch config but I believe it's just a single field, we
could keep that even though I don't think many people use it either
"""
This removes it all. The openvswitch piece was not properly wired
up anyways, since it requires setting virtualport type for a bridge.
For users that know they need that, they can add it via the XML
editor.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
The default driver_io value we use seems to be sufficient. It's very
rare to hear that users need to change the value to something
different, and if they do, they are advanced enough users that can
edit the XML directly IMO.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is another advanced feature with a limited appeal. Users that
know they need this can set it directly with the XML editor
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is a very advanced field that is only shown for a quite
advanced disk device='lun' config. Users that know they need this
can easily set the value via the XML editor
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: storage format: this was from before the days when we
storage-ified everything and we could get the disk format wrong, telling
qemu it has a raw image when it's qcow2. shouldn't be needed anymore for
normal virt usage
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: serial: I know this is useful in some cases but seems quite
obscure. I think the XML editor is fine unless there's some common
usecase I'm missing
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
vmmVMWindow handles all the menuing, and coordinating between the
console, snapshots, and details panel. Simplifies the details
code a bit which will help when we add xmlediting
Given that we bumped deps to fairly modern distros with the
python3 change, I think this is safe. gtk 3.22 is from sep 2016, it's
in debian9 and fedora 25+, which seems fine for our needs.
By default we copy CPU security features to the guest if specific CPU
model is selected. However, this may break migration and will affect
performance of the guest. This adds an option to disable this default
behavior.
The checkbox is clickable only on x86 and only on host where we can
detect any CPU security features, otherwise a tooltip is set to notify
users that there is nothing to copy.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for vsock devices to Hardware Details UI so that vsock devices can
be configured or removed.
Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com>
It's a common requirement for VMs to send SCSI PR commands in VM cluster
environment. This patch adds the managed mode support of scsi persistent
reservation in details page.
Signed-off-by: Lin Ma <lma@suse.com>
The new UI is handled in mediacombo. It's a combobox+entry. The
combobox is prepopulated with host cdrom/floppy devices, and
previously used media paths from gsettings
The new VM wizard no longer has separate UI for cdrom device vs
ISO media. The choosecd dialog is gone all together, and media
is changed with the 'apply' button like all other details changes
This is just a big nasty commit.
Turn the OS inspection page into an always available page that
shows the libosinfo name from the domain metadata XML. Use oslist.py
and have it absorb more of the common behavior needed by create.py
and details.py. Add UI tests for it all
* Tweak the UI
* Add accelerator for the refresh button
* Make the IP labels selectable
* Drop the IP prefix from the UI, it's not the important bit
* Call DHCPLeases on the network instead to support this for more
drivers, like LXC
* Cache the IP results in the domain/network object wrappers
* Catch and log errors
* Poll for IP address when first visiting the interface page
If the interface's type is 'network', then code uses lease as one of
parameters of interface_addresses to get ipv4 and ipv6 address.
If the result is negative, then uses agent to try again, If the result
is still negative, uses arp for final try.
Signed-off-by: Lin Ma <lma@suse.com>
This approach is used in majority of other places and allows the
combobox items to be selected directly instead of typing text in tests.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Hardware Details -> NIC of every VM should now contain checkbox for
interface's link state. This checkbox edits domain's XML by changing
<link state='up/down'/>. If XML doesn't contain this tag, virt manager
assumes state "up".
https://bugzilla.redhat.com/show_bug.cgi?id=1614532
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Show the TPM device model and allow updating it. If a TPM 1.2 has been
chosen, we only allow the TIS interface to be selected. In case of a
TPM 2.0 we also enable the choice of the CRB interface.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Jonathon Jongsma