linux_old1/drivers/target/iscsi/iscsi_target_util.c

1455 lines
36 KiB
C
Raw Normal View History

iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*******************************************************************************
* This file contains the iSCSI Target specific utility functions.
*
* (c) Copyright 2007-2013 Datera, Inc.
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
*
* Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
******************************************************************************/
#include <linux/list.h>
#include <linux/percpu_ida.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include <scsi/scsi_tcq.h>
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#include <target/iscsi/iscsi_transport.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include <target/iscsi/iscsi_target_core.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include "iscsi_target_parameters.h"
#include "iscsi_target_seq_pdu_list.h"
#include "iscsi_target_datain_values.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target_tpg.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"
#define PRINT_BUFF(buff, len) \
{ \
int zzz; \
\
pr_debug("%d:\n", __LINE__); \
for (zzz = 0; zzz < len; zzz++) { \
if (zzz % 16 == 0) { \
if (zzz) \
pr_debug("\n"); \
pr_debug("%4i: ", zzz); \
} \
pr_debug("%02x ", (unsigned char) (buff)[zzz]); \
} \
if ((len + 1) % 16) \
pr_debug("\n"); \
}
extern struct list_head g_tiqn_list;
extern spinlock_t tiqn_lock;
/*
* Called with cmd->r2t_lock held.
*/
int iscsit_add_r2t_to_list(
struct iscsi_cmd *cmd,
u32 offset,
u32 xfer_len,
int recovery,
u32 r2t_sn)
{
struct iscsi_r2t *r2t;
r2t = kmem_cache_zalloc(lio_r2t_cache, GFP_ATOMIC);
if (!r2t) {
pr_err("Unable to allocate memory for struct iscsi_r2t.\n");
return -1;
}
INIT_LIST_HEAD(&r2t->r2t_list);
r2t->recovery_r2t = recovery;
r2t->r2t_sn = (!r2t_sn) ? cmd->r2t_sn++ : r2t_sn;
r2t->offset = offset;
r2t->xfer_len = xfer_len;
list_add_tail(&r2t->r2t_list, &cmd->cmd_r2t_list);
spin_unlock_bh(&cmd->r2t_lock);
iscsit_add_cmd_to_immediate_queue(cmd, cmd->conn, ISTATE_SEND_R2T);
spin_lock_bh(&cmd->r2t_lock);
return 0;
}
struct iscsi_r2t *iscsit_get_r2t_for_eos(
struct iscsi_cmd *cmd,
u32 offset,
u32 length)
{
struct iscsi_r2t *r2t;
spin_lock_bh(&cmd->r2t_lock);
list_for_each_entry(r2t, &cmd->cmd_r2t_list, r2t_list) {
if ((r2t->offset <= offset) &&
(r2t->offset + r2t->xfer_len) >= (offset + length)) {
spin_unlock_bh(&cmd->r2t_lock);
return r2t;
}
}
spin_unlock_bh(&cmd->r2t_lock);
pr_err("Unable to locate R2T for Offset: %u, Length:"
" %u\n", offset, length);
return NULL;
}
struct iscsi_r2t *iscsit_get_r2t_from_list(struct iscsi_cmd *cmd)
{
struct iscsi_r2t *r2t;
spin_lock_bh(&cmd->r2t_lock);
list_for_each_entry(r2t, &cmd->cmd_r2t_list, r2t_list) {
if (!r2t->sent_r2t) {
spin_unlock_bh(&cmd->r2t_lock);
return r2t;
}
}
spin_unlock_bh(&cmd->r2t_lock);
pr_err("Unable to locate next R2T to send for ITT:"
" 0x%08x.\n", cmd->init_task_tag);
return NULL;
}
/*
* Called with cmd->r2t_lock held.
*/
void iscsit_free_r2t(struct iscsi_r2t *r2t, struct iscsi_cmd *cmd)
{
list_del(&r2t->r2t_list);
kmem_cache_free(lio_r2t_cache, r2t);
}
void iscsit_free_r2ts_from_list(struct iscsi_cmd *cmd)
{
struct iscsi_r2t *r2t, *r2t_tmp;
spin_lock_bh(&cmd->r2t_lock);
list_for_each_entry_safe(r2t, r2t_tmp, &cmd->cmd_r2t_list, r2t_list)
iscsit_free_r2t(r2t, cmd);
spin_unlock_bh(&cmd->r2t_lock);
}
/*
* May be called from software interrupt (timer) context for allocating
* iSCSI NopINs.
*/
struct iscsi_cmd *iscsit_allocate_cmd(struct iscsi_conn *conn, int state)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
struct iscsi_cmd *cmd;
struct se_session *se_sess = conn->sess->se_sess;
int size, tag;
tag = percpu_ida_alloc(&se_sess->sess_tag_pool, state);
if (tag < 0)
return NULL;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
size = sizeof(struct iscsi_cmd) + conn->conn_transport->priv_size;
cmd = (struct iscsi_cmd *)(se_sess->sess_cmd_map + (tag * size));
memset(cmd, 0, size);
cmd->se_cmd.map_tag = tag;
cmd->conn = conn;
INIT_LIST_HEAD(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
INIT_LIST_HEAD(&cmd->datain_list);
INIT_LIST_HEAD(&cmd->cmd_r2t_list);
spin_lock_init(&cmd->datain_lock);
spin_lock_init(&cmd->dataout_timeout_lock);
spin_lock_init(&cmd->istate_lock);
spin_lock_init(&cmd->error_lock);
spin_lock_init(&cmd->r2t_lock);
return cmd;
}
EXPORT_SYMBOL(iscsit_allocate_cmd);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_seq *iscsit_get_seq_holder_for_datain(
struct iscsi_cmd *cmd,
u32 seq_send_order)
{
u32 i;
for (i = 0; i < cmd->seq_count; i++)
if (cmd->seq_list[i].seq_send_order == seq_send_order)
return &cmd->seq_list[i];
return NULL;
}
struct iscsi_seq *iscsit_get_seq_holder_for_r2t(struct iscsi_cmd *cmd)
{
u32 i;
if (!cmd->seq_list) {
pr_err("struct iscsi_cmd->seq_list is NULL!\n");
return NULL;
}
for (i = 0; i < cmd->seq_count; i++) {
if (cmd->seq_list[i].type != SEQTYPE_NORMAL)
continue;
if (cmd->seq_list[i].seq_send_order == cmd->seq_send_order) {
cmd->seq_send_order++;
return &cmd->seq_list[i];
}
}
return NULL;
}
struct iscsi_r2t *iscsit_get_holder_for_r2tsn(
struct iscsi_cmd *cmd,
u32 r2t_sn)
{
struct iscsi_r2t *r2t;
spin_lock_bh(&cmd->r2t_lock);
list_for_each_entry(r2t, &cmd->cmd_r2t_list, r2t_list) {
if (r2t->r2t_sn == r2t_sn) {
spin_unlock_bh(&cmd->r2t_lock);
return r2t;
}
}
spin_unlock_bh(&cmd->r2t_lock);
return NULL;
}
static inline int iscsit_check_received_cmdsn(struct iscsi_session *sess, u32 cmdsn)
{
u32 max_cmdsn;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
int ret;
/*
* This is the proper method of checking received CmdSN against
* ExpCmdSN and MaxCmdSN values, as well as accounting for out
* or order CmdSNs due to multiple connection sessions and/or
* CRC failures.
*/
max_cmdsn = atomic_read(&sess->max_cmd_sn);
if (iscsi_sna_gt(cmdsn, max_cmdsn)) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
pr_err("Received CmdSN: 0x%08x is greater than"
" MaxCmdSN: 0x%08x, ignoring.\n", cmdsn, max_cmdsn);
ret = CMDSN_MAXCMDSN_OVERRUN;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
} else if (cmdsn == sess->exp_cmd_sn) {
sess->exp_cmd_sn++;
pr_debug("Received CmdSN matches ExpCmdSN,"
" incremented ExpCmdSN to: 0x%08x\n",
sess->exp_cmd_sn);
ret = CMDSN_NORMAL_OPERATION;
} else if (iscsi_sna_gt(cmdsn, sess->exp_cmd_sn)) {
pr_debug("Received CmdSN: 0x%08x is greater"
" than ExpCmdSN: 0x%08x, not acknowledging.\n",
cmdsn, sess->exp_cmd_sn);
ret = CMDSN_HIGHER_THAN_EXP;
} else {
pr_err("Received CmdSN: 0x%08x is less than"
" ExpCmdSN: 0x%08x, ignoring.\n", cmdsn,
sess->exp_cmd_sn);
ret = CMDSN_LOWER_THAN_EXP;
}
return ret;
}
/*
* Commands may be received out of order if MC/S is in use.
* Ensure they are executed in CmdSN order.
*/
int iscsit_sequence_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
unsigned char *buf, __be32 cmdsn)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
int ret, cmdsn_ret;
bool reject = false;
u8 reason = ISCSI_REASON_BOOKMARK_NO_RESOURCES;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
mutex_lock(&conn->sess->cmdsn_mutex);
cmdsn_ret = iscsit_check_received_cmdsn(conn->sess, be32_to_cpu(cmdsn));
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
switch (cmdsn_ret) {
case CMDSN_NORMAL_OPERATION:
ret = iscsit_execute_cmd(cmd, 0);
if ((ret >= 0) && !list_empty(&conn->sess->sess_ooo_cmdsn_list))
iscsit_execute_ooo_cmdsns(conn->sess);
else if (ret < 0) {
reject = true;
ret = CMDSN_ERROR_CANNOT_RECOVER;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
break;
case CMDSN_HIGHER_THAN_EXP:
ret = iscsit_handle_ooo_cmdsn(conn->sess, cmd, be32_to_cpu(cmdsn));
if (ret < 0) {
reject = true;
ret = CMDSN_ERROR_CANNOT_RECOVER;
break;
}
ret = CMDSN_HIGHER_THAN_EXP;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
break;
case CMDSN_LOWER_THAN_EXP:
case CMDSN_MAXCMDSN_OVERRUN:
default:
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
cmd->i_state = ISTATE_REMOVE;
iscsit_add_cmd_to_immediate_queue(cmd, conn, cmd->i_state);
/*
* Existing callers for iscsit_sequence_cmd() will silently
* ignore commands with CMDSN_LOWER_THAN_EXP, so force this
* return for CMDSN_MAXCMDSN_OVERRUN as well..
*/
ret = CMDSN_LOWER_THAN_EXP;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
break;
}
mutex_unlock(&conn->sess->cmdsn_mutex);
if (reject)
iscsit_reject_cmd(cmd, reason, buf);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return ret;
}
iscsi-target: Refactor RX PDU logic + export request PDU handling This patch refactors existing traditional iscsi RX side PDU handling to use iscsit_transport, and exports the necessary logic for external transport modules. This includes: - Refactor iscsit_handle_scsi_cmd() into PDU setup / processing - Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code - Add iscsit_set_unsoliticed_dataout() wrapper - Refactor iscsit_handle_data_out() into PDU check / processing - Add updated iscsit_handle_data_out() for tradtional iscsi code - Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to accept pre-allocated struct iscsi_cmd - Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport to handle ISTATE_SEND_R2T for TX immediate queue - Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch into iscsi_target_rx_opcode() using iscsit_allocate_cmd() - Turn iscsi_target_rx_thread() process context into NOP for ib_isert side work-queue. v5 changes: - Make iscsit_handle_scsi_cmd() static (Fengguang) - Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab) v3 changes: - Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd after completion v2 changes: - Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes - Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes - Add target_get_sess_cmd() reference counting to iscsit_setup_scsi_cmd() - Add TFO->lio_check_stop_free() fabric API caller - Add export of iscsit_stop_dataout_timer() symbol - Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout() - Convert existing usage of iscsit_build_r2ts_for_cmd() to ->iscsit_get_dataout() - Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd() - Fix RDMAExtentions -> RDMAExtensions typo (andy) - Pass correct dump_payload value into iscsit_get_immediate_data() for iscsit_handle_scsi_cmd() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-07 14:18:24 +08:00
EXPORT_SYMBOL(iscsit_sequence_cmd);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
int iscsit_check_unsolicited_dataout(struct iscsi_cmd *cmd, unsigned char *buf)
{
struct iscsi_conn *conn = cmd->conn;
struct se_cmd *se_cmd = &cmd->se_cmd;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
if (conn->sess->sess_ops->InitialR2T) {
pr_err("Received unexpected unsolicited data"
" while InitialR2T=Yes, protocol error.\n");
transport_send_check_condition_and_sense(se_cmd,
TCM_UNEXPECTED_UNSOLICITED_DATA, 0);
return -1;
}
if ((cmd->first_burst_len + payload_length) >
conn->sess->sess_ops->FirstBurstLength) {
pr_err("Total %u bytes exceeds FirstBurstLength: %u"
" for this Unsolicited DataOut Burst.\n",
(cmd->first_burst_len + payload_length),
conn->sess->sess_ops->FirstBurstLength);
transport_send_check_condition_and_sense(se_cmd,
TCM_INCORRECT_AMOUNT_OF_DATA, 0);
return -1;
}
if (!(hdr->flags & ISCSI_FLAG_CMD_FINAL))
return 0;
if (((cmd->first_burst_len + payload_length) != cmd->se_cmd.data_length) &&
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
((cmd->first_burst_len + payload_length) !=
conn->sess->sess_ops->FirstBurstLength)) {
pr_err("Unsolicited non-immediate data received %u"
" does not equal FirstBurstLength: %u, and does"
" not equal ExpXferLen %u.\n",
(cmd->first_burst_len + payload_length),
conn->sess->sess_ops->FirstBurstLength, cmd->se_cmd.data_length);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
transport_send_check_condition_and_sense(se_cmd,
TCM_INCORRECT_AMOUNT_OF_DATA, 0);
return -1;
}
return 0;
}
struct iscsi_cmd *iscsit_find_cmd_from_itt(
struct iscsi_conn *conn,
itt_t init_task_tag)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
struct iscsi_cmd *cmd;
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (cmd->init_task_tag == init_task_tag) {
spin_unlock_bh(&conn->cmd_lock);
return cmd;
}
}
spin_unlock_bh(&conn->cmd_lock);
pr_err("Unable to locate ITT: 0x%08x on CID: %hu",
init_task_tag, conn->cid);
return NULL;
}
EXPORT_SYMBOL(iscsit_find_cmd_from_itt);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_cmd *iscsit_find_cmd_from_itt_or_dump(
struct iscsi_conn *conn,
itt_t init_task_tag,
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
u32 length)
{
struct iscsi_cmd *cmd;
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) {
if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT)
continue;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (cmd->init_task_tag == init_task_tag) {
spin_unlock_bh(&conn->cmd_lock);
return cmd;
}
}
spin_unlock_bh(&conn->cmd_lock);
pr_err("Unable to locate ITT: 0x%08x on CID: %hu,"
" dumping payload\n", init_task_tag, conn->cid);
if (length)
iscsit_dump_data_payload(conn, length, 1);
return NULL;
}
struct iscsi_cmd *iscsit_find_cmd_from_ttt(
struct iscsi_conn *conn,
u32 targ_xfer_tag)
{
struct iscsi_cmd *cmd = NULL;
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (cmd->targ_xfer_tag == targ_xfer_tag) {
spin_unlock_bh(&conn->cmd_lock);
return cmd;
}
}
spin_unlock_bh(&conn->cmd_lock);
pr_err("Unable to locate TTT: 0x%08x on CID: %hu\n",
targ_xfer_tag, conn->cid);
return NULL;
}
int iscsit_find_cmd_for_recovery(
struct iscsi_session *sess,
struct iscsi_cmd **cmd_ptr,
struct iscsi_conn_recovery **cr_ptr,
itt_t init_task_tag)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
struct iscsi_cmd *cmd = NULL;
struct iscsi_conn_recovery *cr;
/*
* Scan through the inactive connection recovery list's command list.
* If init_task_tag matches the command is still alligent.
*/
spin_lock(&sess->cr_i_lock);
list_for_each_entry(cr, &sess->cr_inactive_list, cr_list) {
spin_lock(&cr->conn_recovery_cmd_lock);
list_for_each_entry(cmd, &cr->conn_recovery_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (cmd->init_task_tag == init_task_tag) {
spin_unlock(&cr->conn_recovery_cmd_lock);
spin_unlock(&sess->cr_i_lock);
*cr_ptr = cr;
*cmd_ptr = cmd;
return -2;
}
}
spin_unlock(&cr->conn_recovery_cmd_lock);
}
spin_unlock(&sess->cr_i_lock);
/*
* Scan through the active connection recovery list's command list.
* If init_task_tag matches the command is ready to be reassigned.
*/
spin_lock(&sess->cr_a_lock);
list_for_each_entry(cr, &sess->cr_active_list, cr_list) {
spin_lock(&cr->conn_recovery_cmd_lock);
list_for_each_entry(cmd, &cr->conn_recovery_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (cmd->init_task_tag == init_task_tag) {
spin_unlock(&cr->conn_recovery_cmd_lock);
spin_unlock(&sess->cr_a_lock);
*cr_ptr = cr;
*cmd_ptr = cmd;
return 0;
}
}
spin_unlock(&cr->conn_recovery_cmd_lock);
}
spin_unlock(&sess->cr_a_lock);
return -1;
}
void iscsit_add_cmd_to_immediate_queue(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
u8 state)
{
struct iscsi_queue_req *qr;
qr = kmem_cache_zalloc(lio_qr_cache, GFP_ATOMIC);
if (!qr) {
pr_err("Unable to allocate memory for"
" struct iscsi_queue_req\n");
return;
}
INIT_LIST_HEAD(&qr->qr_list);
qr->cmd = cmd;
qr->state = state;
spin_lock_bh(&conn->immed_queue_lock);
list_add_tail(&qr->qr_list, &conn->immed_queue_list);
atomic_inc(&cmd->immed_queue_count);
atomic_set(&conn->check_immediate_queue, 1);
spin_unlock_bh(&conn->immed_queue_lock);
wake_up(&conn->queues_wq);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr;
spin_lock_bh(&conn->immed_queue_lock);
if (list_empty(&conn->immed_queue_list)) {
spin_unlock_bh(&conn->immed_queue_lock);
return NULL;
}
qr = list_first_entry(&conn->immed_queue_list,
struct iscsi_queue_req, qr_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
list_del(&qr->qr_list);
if (qr->cmd)
atomic_dec(&qr->cmd->immed_queue_count);
spin_unlock_bh(&conn->immed_queue_lock);
return qr;
}
static void iscsit_remove_cmd_from_immediate_queue(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
spin_lock_bh(&conn->immed_queue_lock);
if (!atomic_read(&cmd->immed_queue_count)) {
spin_unlock_bh(&conn->immed_queue_lock);
return;
}
list_for_each_entry_safe(qr, qr_tmp, &conn->immed_queue_list, qr_list) {
if (qr->cmd != cmd)
continue;
atomic_dec(&qr->cmd->immed_queue_count);
list_del(&qr->qr_list);
kmem_cache_free(lio_qr_cache, qr);
}
spin_unlock_bh(&conn->immed_queue_lock);
if (atomic_read(&cmd->immed_queue_count)) {
pr_err("ITT: 0x%08x immed_queue_count: %d\n",
cmd->init_task_tag,
atomic_read(&cmd->immed_queue_count));
}
}
void iscsit_add_cmd_to_response_queue(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
u8 state)
{
struct iscsi_queue_req *qr;
qr = kmem_cache_zalloc(lio_qr_cache, GFP_ATOMIC);
if (!qr) {
pr_err("Unable to allocate memory for"
" struct iscsi_queue_req\n");
return;
}
INIT_LIST_HEAD(&qr->qr_list);
qr->cmd = cmd;
qr->state = state;
spin_lock_bh(&conn->response_queue_lock);
list_add_tail(&qr->qr_list, &conn->response_queue_list);
atomic_inc(&cmd->response_queue_count);
spin_unlock_bh(&conn->response_queue_lock);
wake_up(&conn->queues_wq);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr;
spin_lock_bh(&conn->response_queue_lock);
if (list_empty(&conn->response_queue_list)) {
spin_unlock_bh(&conn->response_queue_lock);
return NULL;
}
qr = list_first_entry(&conn->response_queue_list,
struct iscsi_queue_req, qr_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
list_del(&qr->qr_list);
if (qr->cmd)
atomic_dec(&qr->cmd->response_queue_count);
spin_unlock_bh(&conn->response_queue_lock);
return qr;
}
static void iscsit_remove_cmd_from_response_queue(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
spin_lock_bh(&conn->response_queue_lock);
if (!atomic_read(&cmd->response_queue_count)) {
spin_unlock_bh(&conn->response_queue_lock);
return;
}
list_for_each_entry_safe(qr, qr_tmp, &conn->response_queue_list,
qr_list) {
if (qr->cmd != cmd)
continue;
atomic_dec(&qr->cmd->response_queue_count);
list_del(&qr->qr_list);
kmem_cache_free(lio_qr_cache, qr);
}
spin_unlock_bh(&conn->response_queue_lock);
if (atomic_read(&cmd->response_queue_count)) {
pr_err("ITT: 0x%08x response_queue_count: %d\n",
cmd->init_task_tag,
atomic_read(&cmd->response_queue_count));
}
}
bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn)
{
bool empty;
spin_lock_bh(&conn->immed_queue_lock);
empty = list_empty(&conn->immed_queue_list);
spin_unlock_bh(&conn->immed_queue_lock);
if (!empty)
return empty;
spin_lock_bh(&conn->response_queue_lock);
empty = list_empty(&conn->response_queue_list);
spin_unlock_bh(&conn->response_queue_lock);
return empty;
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
spin_lock_bh(&conn->immed_queue_lock);
list_for_each_entry_safe(qr, qr_tmp, &conn->immed_queue_list, qr_list) {
list_del(&qr->qr_list);
if (qr->cmd)
atomic_dec(&qr->cmd->immed_queue_count);
kmem_cache_free(lio_qr_cache, qr);
}
spin_unlock_bh(&conn->immed_queue_lock);
spin_lock_bh(&conn->response_queue_lock);
list_for_each_entry_safe(qr, qr_tmp, &conn->response_queue_list,
qr_list) {
list_del(&qr->qr_list);
if (qr->cmd)
atomic_dec(&qr->cmd->response_queue_count);
kmem_cache_free(lio_qr_cache, qr);
}
spin_unlock_bh(&conn->response_queue_lock);
}
void iscsit_release_cmd(struct iscsi_cmd *cmd)
{
struct iscsi_session *sess;
struct se_cmd *se_cmd = &cmd->se_cmd;
if (cmd->conn)
sess = cmd->conn->sess;
else
sess = cmd->sess;
BUG_ON(!sess || !sess->se_sess);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
kfree(cmd->buf_ptr);
kfree(cmd->pdu_list);
kfree(cmd->seq_list);
kfree(cmd->tmr_req);
kfree(cmd->iov_data);
kfree(cmd->text_in_ptr);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
percpu_ida_free(&sess->se_sess->sess_tag_pool, se_cmd->map_tag);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
}
EXPORT_SYMBOL(iscsit_release_cmd);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
target: Add TFO->abort_task for aborted task resources release Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-23 05:55:56 +08:00
void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd,
bool check_queues)
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
{
struct iscsi_conn *conn = cmd->conn;
if (scsi_cmd) {
if (cmd->data_direction == DMA_TO_DEVICE) {
iscsit_stop_dataout_timer(cmd);
iscsit_free_r2ts_from_list(cmd);
}
if (cmd->data_direction == DMA_FROM_DEVICE)
iscsit_free_all_datain_reqs(cmd);
}
if (conn && check_queues) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
iscsit_remove_cmd_from_immediate_queue(cmd, conn);
iscsit_remove_cmd_from_response_queue(cmd, conn);
}
}
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown)
{
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
struct se_cmd *se_cmd = NULL;
int rc;
/*
* Determine if a struct se_cmd is associated with
* this struct iscsi_cmd.
*/
switch (cmd->iscsi_opcode) {
case ISCSI_OP_SCSI_CMD:
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
se_cmd = &cmd->se_cmd;
__iscsit_free_cmd(cmd, true, shutdown);
/*
* Fallthrough
*/
case ISCSI_OP_SCSI_TMFUNC:
rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
if (!rc && shutdown && se_cmd && se_cmd->se_sess) {
__iscsit_free_cmd(cmd, true, shutdown);
target_put_sess_cmd(se_cmd);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
}
break;
iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98 [ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98 [ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57 [ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85 [ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10 [ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13 Reported-by: <jrepac@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-17 08:04:15 +08:00
case ISCSI_OP_REJECT:
/*
* Handle special case for REJECT when iscsi_add_reject*() has
* overwritten the original iscsi_opcode assignment, and the
* associated cmd->se_cmd needs to be released.
*/
if (cmd->se_cmd.se_tfo != NULL) {
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
se_cmd = &cmd->se_cmd;
__iscsit_free_cmd(cmd, true, shutdown);
rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
if (!rc && shutdown && se_cmd->se_sess) {
__iscsit_free_cmd(cmd, true, shutdown);
target_put_sess_cmd(se_cmd);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
}
iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98 [ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98 [ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57 [ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85 [ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10 [ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13 Reported-by: <jrepac@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-17 08:04:15 +08:00
break;
}
/* Fall-through */
default:
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
__iscsit_free_cmd(cmd, false, shutdown);
iscsit_release_cmd(cmd);
break;
}
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
int iscsit_check_session_usage_count(struct iscsi_session *sess)
{
spin_lock_bh(&sess->session_usage_lock);
if (sess->session_usage_count != 0) {
sess->session_waiting_on_uc = 1;
spin_unlock_bh(&sess->session_usage_lock);
if (in_interrupt())
return 2;
wait_for_completion(&sess->session_waiting_on_uc_comp);
return 1;
}
spin_unlock_bh(&sess->session_usage_lock);
return 0;
}
void iscsit_dec_session_usage_count(struct iscsi_session *sess)
{
spin_lock_bh(&sess->session_usage_lock);
sess->session_usage_count--;
if (!sess->session_usage_count && sess->session_waiting_on_uc)
complete(&sess->session_waiting_on_uc_comp);
spin_unlock_bh(&sess->session_usage_lock);
}
void iscsit_inc_session_usage_count(struct iscsi_session *sess)
{
spin_lock_bh(&sess->session_usage_lock);
sess->session_usage_count++;
spin_unlock_bh(&sess->session_usage_lock);
}
struct iscsi_conn *iscsit_get_conn_from_cid(struct iscsi_session *sess, u16 cid)
{
struct iscsi_conn *conn;
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(conn, &sess->sess_conn_list, conn_list) {
if ((conn->cid == cid) &&
(conn->conn_state == TARG_CONN_STATE_LOGGED_IN)) {
iscsit_inc_conn_usage_count(conn);
spin_unlock_bh(&sess->conn_lock);
return conn;
}
}
spin_unlock_bh(&sess->conn_lock);
return NULL;
}
struct iscsi_conn *iscsit_get_conn_from_cid_rcfr(struct iscsi_session *sess, u16 cid)
{
struct iscsi_conn *conn;
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(conn, &sess->sess_conn_list, conn_list) {
if (conn->cid == cid) {
iscsit_inc_conn_usage_count(conn);
spin_lock(&conn->state_lock);
atomic_set(&conn->connection_wait_rcfr, 1);
spin_unlock(&conn->state_lock);
spin_unlock_bh(&sess->conn_lock);
return conn;
}
}
spin_unlock_bh(&sess->conn_lock);
return NULL;
}
void iscsit_check_conn_usage_count(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->conn_usage_lock);
if (conn->conn_usage_count != 0) {
conn->conn_waiting_on_uc = 1;
spin_unlock_bh(&conn->conn_usage_lock);
wait_for_completion(&conn->conn_waiting_on_uc_comp);
return;
}
spin_unlock_bh(&conn->conn_usage_lock);
}
void iscsit_dec_conn_usage_count(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->conn_usage_lock);
conn->conn_usage_count--;
if (!conn->conn_usage_count && conn->conn_waiting_on_uc)
complete(&conn->conn_waiting_on_uc_comp);
spin_unlock_bh(&conn->conn_usage_lock);
}
void iscsit_inc_conn_usage_count(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->conn_usage_lock);
conn->conn_usage_count++;
spin_unlock_bh(&conn->conn_usage_lock);
}
static int iscsit_add_nopin(struct iscsi_conn *conn, int want_response)
{
u8 state;
struct iscsi_cmd *cmd;
cmd = iscsit_allocate_cmd(conn, TASK_RUNNING);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (!cmd)
return -1;
cmd->iscsi_opcode = ISCSI_OP_NOOP_IN;
state = (want_response) ? ISTATE_SEND_NOPIN_WANT_RESPONSE :
ISTATE_SEND_NOPIN_NO_RESPONSE;
cmd->init_task_tag = RESERVED_ITT;
cmd->targ_xfer_tag = (want_response) ?
session_get_next_ttt(conn->sess) : 0xFFFFFFFF;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_bh(&conn->cmd_lock);
list_add_tail(&cmd->i_conn_node, &conn->conn_cmd_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&conn->cmd_lock);
if (want_response)
iscsit_start_nopin_response_timer(conn);
iscsit_add_cmd_to_immediate_queue(cmd, conn, state);
return 0;
}
static void iscsit_handle_nopin_response_timeout(unsigned long data)
{
struct iscsi_conn *conn = (struct iscsi_conn *) data;
iscsit_inc_conn_usage_count(conn);
spin_lock_bh(&conn->nopin_timer_lock);
if (conn->nopin_response_timer_flags & ISCSI_TF_STOP) {
spin_unlock_bh(&conn->nopin_timer_lock);
iscsit_dec_conn_usage_count(conn);
return;
}
pr_debug("Did not receive response to NOPIN on CID: %hu on"
" SID: %u, failing connection.\n", conn->cid,
conn->sess->sid);
conn->nopin_response_timer_flags &= ~ISCSI_TF_RUNNING;
spin_unlock_bh(&conn->nopin_timer_lock);
{
struct iscsi_portal_group *tpg = conn->sess->tpg;
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
if (tiqn) {
spin_lock_bh(&tiqn->sess_err_stats.lock);
strcpy(tiqn->sess_err_stats.last_sess_fail_rem_name,
conn->sess->sess_ops->InitiatorName);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tiqn->sess_err_stats.last_sess_failure_type =
ISCSI_SESS_ERR_CXN_TIMEOUT;
tiqn->sess_err_stats.cxn_timeout_errors++;
atomic_long_inc(&conn->sess->conn_timeout_errors);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&tiqn->sess_err_stats.lock);
}
}
iscsit_cause_connection_reinstatement(conn, 0);
iscsit_dec_conn_usage_count(conn);
}
void iscsit_mod_nopin_response_timer(struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
spin_lock_bh(&conn->nopin_timer_lock);
if (!(conn->nopin_response_timer_flags & ISCSI_TF_RUNNING)) {
spin_unlock_bh(&conn->nopin_timer_lock);
return;
}
mod_timer(&conn->nopin_response_timer,
(get_jiffies_64() + na->nopin_response_timeout * HZ));
spin_unlock_bh(&conn->nopin_timer_lock);
}
/*
* Called with conn->nopin_timer_lock held.
*/
void iscsit_start_nopin_response_timer(struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
spin_lock_bh(&conn->nopin_timer_lock);
if (conn->nopin_response_timer_flags & ISCSI_TF_RUNNING) {
spin_unlock_bh(&conn->nopin_timer_lock);
return;
}
init_timer(&conn->nopin_response_timer);
conn->nopin_response_timer.expires =
(get_jiffies_64() + na->nopin_response_timeout * HZ);
conn->nopin_response_timer.data = (unsigned long)conn;
conn->nopin_response_timer.function = iscsit_handle_nopin_response_timeout;
conn->nopin_response_timer_flags &= ~ISCSI_TF_STOP;
conn->nopin_response_timer_flags |= ISCSI_TF_RUNNING;
add_timer(&conn->nopin_response_timer);
pr_debug("Started NOPIN Response Timer on CID: %d to %u"
" seconds\n", conn->cid, na->nopin_response_timeout);
spin_unlock_bh(&conn->nopin_timer_lock);
}
void iscsit_stop_nopin_response_timer(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->nopin_timer_lock);
if (!(conn->nopin_response_timer_flags & ISCSI_TF_RUNNING)) {
spin_unlock_bh(&conn->nopin_timer_lock);
return;
}
conn->nopin_response_timer_flags |= ISCSI_TF_STOP;
spin_unlock_bh(&conn->nopin_timer_lock);
del_timer_sync(&conn->nopin_response_timer);
spin_lock_bh(&conn->nopin_timer_lock);
conn->nopin_response_timer_flags &= ~ISCSI_TF_RUNNING;
spin_unlock_bh(&conn->nopin_timer_lock);
}
static void iscsit_handle_nopin_timeout(unsigned long data)
{
struct iscsi_conn *conn = (struct iscsi_conn *) data;
iscsit_inc_conn_usage_count(conn);
spin_lock_bh(&conn->nopin_timer_lock);
if (conn->nopin_timer_flags & ISCSI_TF_STOP) {
spin_unlock_bh(&conn->nopin_timer_lock);
iscsit_dec_conn_usage_count(conn);
return;
}
conn->nopin_timer_flags &= ~ISCSI_TF_RUNNING;
spin_unlock_bh(&conn->nopin_timer_lock);
iscsit_add_nopin(conn, 1);
iscsit_dec_conn_usage_count(conn);
}
/*
* Called with conn->nopin_timer_lock held.
*/
void __iscsit_start_nopin_timer(struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
/*
* NOPIN timeout is disabled.
*/
if (!na->nopin_timeout)
return;
if (conn->nopin_timer_flags & ISCSI_TF_RUNNING)
return;
init_timer(&conn->nopin_timer);
conn->nopin_timer.expires = (get_jiffies_64() + na->nopin_timeout * HZ);
conn->nopin_timer.data = (unsigned long)conn;
conn->nopin_timer.function = iscsit_handle_nopin_timeout;
conn->nopin_timer_flags &= ~ISCSI_TF_STOP;
conn->nopin_timer_flags |= ISCSI_TF_RUNNING;
add_timer(&conn->nopin_timer);
pr_debug("Started NOPIN Timer on CID: %d at %u second"
" interval\n", conn->cid, na->nopin_timeout);
}
void iscsit_start_nopin_timer(struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
/*
* NOPIN timeout is disabled..
*/
if (!na->nopin_timeout)
return;
spin_lock_bh(&conn->nopin_timer_lock);
if (conn->nopin_timer_flags & ISCSI_TF_RUNNING) {
spin_unlock_bh(&conn->nopin_timer_lock);
return;
}
init_timer(&conn->nopin_timer);
conn->nopin_timer.expires = (get_jiffies_64() + na->nopin_timeout * HZ);
conn->nopin_timer.data = (unsigned long)conn;
conn->nopin_timer.function = iscsit_handle_nopin_timeout;
conn->nopin_timer_flags &= ~ISCSI_TF_STOP;
conn->nopin_timer_flags |= ISCSI_TF_RUNNING;
add_timer(&conn->nopin_timer);
pr_debug("Started NOPIN Timer on CID: %d at %u second"
" interval\n", conn->cid, na->nopin_timeout);
spin_unlock_bh(&conn->nopin_timer_lock);
}
void iscsit_stop_nopin_timer(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->nopin_timer_lock);
if (!(conn->nopin_timer_flags & ISCSI_TF_RUNNING)) {
spin_unlock_bh(&conn->nopin_timer_lock);
return;
}
conn->nopin_timer_flags |= ISCSI_TF_STOP;
spin_unlock_bh(&conn->nopin_timer_lock);
del_timer_sync(&conn->nopin_timer);
spin_lock_bh(&conn->nopin_timer_lock);
conn->nopin_timer_flags &= ~ISCSI_TF_RUNNING;
spin_unlock_bh(&conn->nopin_timer_lock);
}
int iscsit_send_tx_data(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn,
int use_misc)
{
int tx_sent, tx_size;
u32 iov_count;
struct kvec *iov;
send_data:
tx_size = cmd->tx_size;
if (!use_misc) {
iov = &cmd->iov_data[0];
iov_count = cmd->iov_data_count;
} else {
iov = &cmd->iov_misc[0];
iov_count = cmd->iov_misc_count;
}
tx_sent = tx_data(conn, &iov[0], iov_count, tx_size);
if (tx_size != tx_sent) {
if (tx_sent == -EAGAIN) {
pr_err("tx_data() returned -EAGAIN\n");
goto send_data;
} else
return -1;
}
cmd->tx_size = 0;
return 0;
}
int iscsit_fe_sendpage_sg(
struct iscsi_cmd *cmd,
struct iscsi_conn *conn)
{
struct scatterlist *sg = cmd->first_data_sg;
struct kvec iov;
u32 tx_hdr_size, data_len;
u32 offset = cmd->first_data_sg_off;
int tx_sent, iov_off;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
send_hdr:
tx_hdr_size = ISCSI_HDR_LEN;
if (conn->conn_ops->HeaderDigest)
tx_hdr_size += ISCSI_CRC_LEN;
iov.iov_base = cmd->pdu;
iov.iov_len = tx_hdr_size;
tx_sent = tx_data(conn, &iov, 1, tx_hdr_size);
if (tx_hdr_size != tx_sent) {
if (tx_sent == -EAGAIN) {
pr_err("tx_data() returned -EAGAIN\n");
goto send_hdr;
}
return -1;
}
data_len = cmd->tx_size - tx_hdr_size - cmd->padding;
/*
* Set iov_off used by padding and data digest tx_data() calls below
* in order to determine proper offset into cmd->iov_data[]
*/
if (conn->conn_ops->DataDigest) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
data_len -= ISCSI_CRC_LEN;
if (cmd->padding)
iov_off = (cmd->iov_data_count - 2);
else
iov_off = (cmd->iov_data_count - 1);
} else {
iov_off = (cmd->iov_data_count - 1);
}
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*
* Perform sendpage() for each page in the scatterlist
*/
while (data_len) {
u32 space = (sg->length - offset);
u32 sub_len = min_t(u32, data_len, space);
send_pg:
tx_sent = conn->sock->ops->sendpage(conn->sock,
sg_page(sg), sg->offset + offset, sub_len, 0);
if (tx_sent != sub_len) {
if (tx_sent == -EAGAIN) {
pr_err("tcp_sendpage() returned"
" -EAGAIN\n");
goto send_pg;
}
pr_err("tcp_sendpage() failure: %d\n",
tx_sent);
return -1;
}
data_len -= sub_len;
offset = 0;
sg = sg_next(sg);
}
send_padding:
if (cmd->padding) {
struct kvec *iov_p = &cmd->iov_data[iov_off++];
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tx_sent = tx_data(conn, iov_p, 1, cmd->padding);
if (cmd->padding != tx_sent) {
if (tx_sent == -EAGAIN) {
pr_err("tx_data() returned -EAGAIN\n");
goto send_padding;
}
return -1;
}
}
send_datacrc:
if (conn->conn_ops->DataDigest) {
struct kvec *iov_d = &cmd->iov_data[iov_off];
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN);
if (ISCSI_CRC_LEN != tx_sent) {
if (tx_sent == -EAGAIN) {
pr_err("tx_data() returned -EAGAIN\n");
goto send_datacrc;
}
return -1;
}
}
return 0;
}
/*
* This function is used for mainly sending a ISCSI_TARG_LOGIN_RSP PDU
* back to the Initiator when an expection condition occurs with the
* errors set in status_class and status_detail.
*
* Parameters: iSCSI Connection, Status Class, Status Detail.
* Returns: 0 on success, -1 on error.
*/
int iscsit_tx_login_rsp(struct iscsi_conn *conn, u8 status_class, u8 status_detail)
{
struct iscsi_login_rsp *hdr;
struct iscsi_login *login = conn->conn_login;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
login->login_failed = 1;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
iscsit_collect_login_stats(conn, status_class, status_detail);
memset(&login->rsp[0], 0, ISCSI_HDR_LEN);
hdr = (struct iscsi_login_rsp *)&login->rsp[0];
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
hdr->opcode = ISCSI_OP_LOGIN_RSP;
hdr->status_class = status_class;
hdr->status_detail = status_detail;
hdr->itt = conn->login_itt;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return conn->conn_transport->iscsit_put_login_tx(conn, login, 0);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
void iscsit_print_session_params(struct iscsi_session *sess)
{
struct iscsi_conn *conn;
pr_debug("-----------------------------[Session Params for"
" SID: %u]-----------------------------\n", sess->sid);
spin_lock_bh(&sess->conn_lock);
list_for_each_entry(conn, &sess->sess_conn_list, conn_list)
iscsi_dump_conn_ops(conn->conn_ops);
spin_unlock_bh(&sess->conn_lock);
iscsi_dump_sess_ops(sess->sess_ops);
}
static int iscsit_do_rx_data(
struct iscsi_conn *conn,
struct iscsi_data_count *count)
{
int data = count->data_length, rx_loop = 0, total_rx = 0;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
return -1;
memset(&msg, 0, sizeof(struct msghdr));
iov_iter_kvec(&msg.msg_iter, READ | ITER_KVEC,
count->iov, count->iov_count, data);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
while (total_rx < data) {
rx_loop = sock_recvmsg(conn->sock, &msg,
(data - total_rx), MSG_WAITALL);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (rx_loop <= 0) {
pr_debug("rx_loop: %d total_rx: %d\n",
rx_loop, total_rx);
return rx_loop;
}
total_rx += rx_loop;
pr_debug("rx_loop: %d, total_rx: %d, data: %d\n",
rx_loop, total_rx, data);
}
return total_rx;
}
static int iscsit_do_tx_data(
struct iscsi_conn *conn,
struct iscsi_data_count *count)
{
int ret, iov_len;
struct kvec *iov_p;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
return -1;
if (count->data_length <= 0) {
pr_err("Data length is: %d\n", count->data_length);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return -1;
}
memset(&msg, 0, sizeof(struct msghdr));
iov_p = count->iov;
iov_len = count->iov_count;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
ret = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len,
count->data_length);
if (ret != count->data_length) {
pr_err("Unexpected ret: %d send data %d\n",
ret, count->data_length);
return -EPIPE;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
pr_debug("ret: %d, sent data: %d\n", ret, count->data_length);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return ret;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
}
int rx_data(
struct iscsi_conn *conn,
struct kvec *iov,
int iov_count,
int data)
{
struct iscsi_data_count c;
if (!conn || !conn->sock || !conn->conn_ops)
return -1;
memset(&c, 0, sizeof(struct iscsi_data_count));
c.iov = iov;
c.iov_count = iov_count;
c.data_length = data;
c.type = ISCSI_RX_DATA;
return iscsit_do_rx_data(conn, &c);
}
int tx_data(
struct iscsi_conn *conn,
struct kvec *iov,
int iov_count,
int data)
{
struct iscsi_data_count c;
if (!conn || !conn->sock || !conn->conn_ops)
return -1;
memset(&c, 0, sizeof(struct iscsi_data_count));
c.iov = iov;
c.iov_count = iov_count;
c.data_length = data;
c.type = ISCSI_TX_DATA;
return iscsit_do_tx_data(conn, &c);
}
void iscsit_collect_login_stats(
struct iscsi_conn *conn,
u8 status_class,
u8 status_detail)
{
struct iscsi_param *intrname = NULL;
struct iscsi_tiqn *tiqn;
struct iscsi_login_stats *ls;
tiqn = iscsit_snmp_get_tiqn(conn);
if (!tiqn)
return;
ls = &tiqn->login_stats;
spin_lock(&ls->lock);
if (!strcmp(conn->login_ip, ls->last_intr_fail_ip_addr) &&
((get_jiffies_64() - ls->last_fail_time) < 10)) {
/* We already have the failure info for this login */
spin_unlock(&ls->lock);
return;
}
if (status_class == ISCSI_STATUS_CLS_SUCCESS)
ls->accepts++;
else if (status_class == ISCSI_STATUS_CLS_REDIRECT) {
ls->redirects++;
ls->last_fail_type = ISCSI_LOGIN_FAIL_REDIRECT;
} else if ((status_class == ISCSI_STATUS_CLS_INITIATOR_ERR) &&
(status_detail == ISCSI_LOGIN_STATUS_AUTH_FAILED)) {
ls->authenticate_fails++;
ls->last_fail_type = ISCSI_LOGIN_FAIL_AUTHENTICATE;
} else if ((status_class == ISCSI_STATUS_CLS_INITIATOR_ERR) &&
(status_detail == ISCSI_LOGIN_STATUS_TGT_FORBIDDEN)) {
ls->authorize_fails++;
ls->last_fail_type = ISCSI_LOGIN_FAIL_AUTHORIZE;
} else if ((status_class == ISCSI_STATUS_CLS_INITIATOR_ERR) &&
(status_detail == ISCSI_LOGIN_STATUS_INIT_ERR)) {
ls->negotiate_fails++;
ls->last_fail_type = ISCSI_LOGIN_FAIL_NEGOTIATE;
} else {
ls->other_fails++;
ls->last_fail_type = ISCSI_LOGIN_FAIL_OTHER;
}
/* Save initiator name, ip address and time, if it is a failed login */
if (status_class != ISCSI_STATUS_CLS_SUCCESS) {
if (conn->param_list)
intrname = iscsi_find_param_from_key(INITIATORNAME,
conn->param_list);
strlcpy(ls->last_intr_fail_name,
(intrname ? intrname->value : "Unknown"),
sizeof(ls->last_intr_fail_name));
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
ls->last_intr_fail_ip_family = conn->login_family;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
snprintf(ls->last_intr_fail_ip_addr, IPV6_ADDRESS_SPACE,
"%s", conn->login_ip);
ls->last_fail_time = get_jiffies_64();
}
spin_unlock(&ls->lock);
}
struct iscsi_tiqn *iscsit_snmp_get_tiqn(struct iscsi_conn *conn)
{
struct iscsi_portal_group *tpg;
if (!conn || !conn->sess)
return NULL;
tpg = conn->sess->tpg;
if (!tpg)
return NULL;
if (!tpg->tpg_tiqn)
return NULL;
return tpg->tpg_tiqn;
}