Commit Graph

21792 Commits

Author SHA1 Message Date
Lars-Peter Clausen c59e6abba9 ASoC: wm8971: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:27:41 +01:00
Lars-Peter Clausen 643518403c ASoC: wm8971: Integrate capacitor charging into the DAPM sequence
When being powered on, either initially on probe or when resuming from
suspend, the wm8971 configures the device for quick output capacitor
charging. Since the charging can take a rather long time (up to multiple
seconds) it is done asynchronously without blocking. A delayed work item is
run once the charging is finished and the device is switched to the target
bias level.

This all done asynchronously to the regular DAPM sequence accessing the same
data structures and registers without any looking, which can lead to race
conditions. Furthermore this potentially delays the start of stream on the
CODEC while the rest of the system is already up and running, meaning the
first bytes of audio are lost. It also does no comply with the assumption of
the DAPM core that if set_bias_level() returned successfully the device will
be at the requested bias level.

This patch slightly refactors things and makes sure that the caps charging
is properly integrated into the DAPM sequence. When transitioning from
SND_SOC_BIAS_OFF to SND_SOC_BIAS_STANDBY the part will be put into fast
charging mode and a work item will be scheduled that puts it back into
standby charging once the charging period has elapsed. If a playback or
capture stream is started while charging is in progress the driver will now
wait in SND_SOC_BIAS_PREPARE until the charging is done. This makes sure
that charging is done asynchronously in the background when the chip is
idle, but at the same time makes sure that playback/capture is not started
before the charging is done.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:27:36 +01:00
Lars-Peter Clausen ab87ce1d9b ASoC: wm8971: Use system_power_efficient_wq instead of custom workqueue
The delayed work used by the wm8971 driver to manage the caps charging
doesn't have any special requirements that would justify using a custom
workqueue, just use the generic system_power_efficient_wq instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:27:33 +01:00
Alexandre Belloni 488cb53391 ASoC: atmel-pcm-pdc: merge atmel-pcm back in
atmel-pcm.c was split into two files to create a generic framework for both PDC
and DMA.

atmel-pcm-dma.c is using the generic dmaengine framework since 95e0e07e71
(ASoC: atmel-pcm: use generic dmaengine framework).

Merge atmel-pcm.c in atmel-pcm-pdc.c as this is now the only user.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:24:27 +01:00
Kuninori Morimoto 43cb6954f8 ASoC: rsnd: add Synchronous SRC mode
Renesas R-Car sound SRC (= Sampling Rate Converter) has
Asynchronous/Synchronous SRC mode. Asynchronous mode is already
supported via DPCM. This patch adds Synchronous mode on it.

The condition of enabling Synchronous mode are
- SoC is clock master
- Sound uses SRC
- Sound doesn't use DVC
- Sound card uses DPCM (= rsrc-card card)

	amixer set "SRC Out Rate" on
	aplay xxx.wav &
	amixer set "SRC Out Rate" 48000

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:23:37 +01:00
Greg Kroah-Hartman 86d39839bc Update extcon for v4.1
This patchset include two new extcon driver and fix minor issue of extcon
 driver.
 
 Detailed description for patchset:
 1. new extcon-max77843.c and extcon-usb-gpio.c extcon driver
 - extcon-max77843.c driver support the MAXIM MAX77843 MUIC (Micor-USB Interface
 Controller) device which handles the various external connectors such as TA/USB
 /USB-HOST/JIG and so on.
 - extcon-usb-gpio.c driver support the USB and USB-HOST cable detection by
 using the GPIO pin which is connected to USB ID pin. This GPIO pin updates the
 USB cable states.
 
 2. Rename the filename of extcon core driver and add missing locking mechanism
 - Rename the previous extcon-class driver.c as extcon.c because '-class'
 postfix is not necessary word.
 - extcon core driver (extcon.c) used the raw_notifier_chain. It must be
 protected by locking mechanism to avoid the list changing while
 extcon_update_state() is executed.
 
 3. Fix minor issue of extcon drviers
 - Fix cable name by using the capital letter instead of small letter on
 extcon-max77693.c driver.
 - Clean-up code of extcon-arizona.c to detect headphone cable.
 - Fix the wrong return type and variable type on extcon-max77843.c.
 - Fix the checkpatch warning of all extcon drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJVGLj3AAoJEJzN3yze689TgjAQAI61DDF9E77ezOQlHdtWPmyN
 d2Ny59zvioL3SjKX1zBWQ3Fjj76u0tvvMknVtOBemucz4jJtDNfrsslbHf6zGu7V
 2/nHtGw+PvsawSfUxYfyk8zpXkhQmEekLQICzSxZYNntuFuh0xu+tidlWM5sStAP
 SpJPENYXrMdQUPMoxowPJtgw6dLvIkG86Yk1DFoAQM7SKgsP6f3a4inlnQtajbf1
 J93PRuir0ih06MhLin07BM97JetJ69uHJHjqzKZo1DvAHom8PgfmTqTZLcdFIu/A
 itWtpGTOF2AH6BR5K0xrrAzzyoTwOXhBfY2xvy7zM9oTWV1zyZ9FQc/I0kFaeO8B
 qcT7vSRMpbKciVw/xDnWjBFnOcE+p53SvBQI7p//8pUVoP3P4DdFXUBmwHzWMeCC
 4v7BSFo+LhqbO1vhOBkiTbsraIiTVFNI62b68AE2HwXmO4pjlMifgLrudNdns9QW
 7lqXpdzD1Mbk7yfUVtcvl6xOIPoKD1No37C/iTX2hqLyNwiLIt0VNEvEEO3S6rqX
 2b3CM6JJOsvyMix5+mWlxlmFEPqdpFf3+vvhsviI68cY7617LggKxZsxm1wSe5hO
 faAQMnj7W51YO9t9Umat95LYIMxGkwdilH/n61ocQbV06qwIMro9Ke+hzxzxupyI
 9l4l6Y4j5PH4wTIA+Pty
 =LkOG
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v4.1

This patchset include two new extcon driver and fix minor issue of extcon
driver.

Detailed description for patchset:
1. new extcon-max77843.c and extcon-usb-gpio.c extcon driver
- extcon-max77843.c driver support the MAXIM MAX77843 MUIC (Micor-USB Interface
Controller) device which handles the various external connectors such as TA/USB
/USB-HOST/JIG and so on.
- extcon-usb-gpio.c driver support the USB and USB-HOST cable detection by
using the GPIO pin which is connected to USB ID pin. This GPIO pin updates the
USB cable states.

2. Rename the filename of extcon core driver and add missing locking mechanism
- Rename the previous extcon-class driver.c as extcon.c because '-class'
postfix is not necessary word.
- extcon core driver (extcon.c) used the raw_notifier_chain. It must be
protected by locking mechanism to avoid the list changing while
extcon_update_state() is executed.

3. Fix minor issue of extcon drviers
- Fix cable name by using the capital letter instead of small letter on
extcon-max77693.c driver.
- Clean-up code of extcon-arizona.c to detect headphone cable.
- Fix the wrong return type and variable type on extcon-max77843.c.
- Fix the checkpatch warning of all extcon drivers.
2015-04-01 13:51:59 +02:00
Uwe Kleine-König 969b861906 ASoC: rcar: mark device data as constant
A driver's device data should and can be const. This is a follow-up on
commit 33187fb4a2 (ASoC: rsnd: constify of_device_id array) which
marked the of_device_id as const.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 09:58:40 +01:00
Uwe Kleine-König 9a42ab04aa ASoC: fsi: mark several data structures as const
A driver's platform_device_id and device data should and can be const.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 09:31:19 +01:00
Uwe Kleine-König 3b6281cf28 ASoC: fsi: reorder code to make a forward declaration superfluous
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 09:31:19 +01:00
Uwe Kleine-König 1c6ae56c5d ASoC: fsi: fix license specification
According to the file header only GPL v2 applies to it. Fix the
MODULE_LICENSE parameter accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-31 14:31:19 +01:00
Kuninori Morimoto 3b7843ff61 ASoC: rsnd: add DPCM based sampling rate convert
This patch supports DPCM based sampling rate convert on Renesas sound
driver. It assumes...
 1. SRC is implemented as FE
 2. BE dai_link supports .be_hw_params_fixup

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 16:00:49 -07:00
Kuninori Morimoto b543b52a44 ASoC: rsnd: remove useless debug message
This patch removes useless debug message. especially some kind of
"probed" message will be printed from core.c if it has #define DEBUG

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 16:00:47 -07:00
Mark Brown f8d04e7d91 Merge branch 'asoc-fix-rcar' into HEAD 2015-03-27 16:00:39 -07:00
Kuninori Morimoto 2f78dd7f40 ASoC: rsnd: call clk_prepare/unprepare() in probe/remove
clk_prepare_enable()/clk_disable_unprepare() uses mutex inside,
in concretely clk_prepare()/clk_unprepare().And it uses __schedule().
Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas
sound driver's spin lock irq.
This patch separates thesse into clk_prepare()/clk_unprepare() and
clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from
probe/remove function. Special thanks to Das Biju.

Reported-by: Das Biju <biju.das@bp.renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 15:59:17 -07:00
Kuninori Morimoto af7e2be966 ASoC: rsrc-card: add .be_hw_params_fixup support for convert rate
Current rsnd-dpcm-card is supporting DPCM FE/BE sound card.
This patch adds .be_hw_params_fixup and enabled sampling convert rate.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 15:58:20 -07:00
Kuninori Morimoto 415f1cb29d ASoC: rsrc-card: add Renesas sampling rate convert sound card support
Renesas sound card has "sampling rate convert" feature which
should be implemented via DPCM.
But, sound card driver point of view, it is difficult to add
this DPCM feature on simple-card driver. Especially, DT binding
support is very difficult.

This patch implements DPCM feature on DT as Renesas specific sound card.
This new driver is copied from current simple-card driver.
Main difference between simple-card and this driver are...
 1. removed unused feature from simple-card
 2. removed driver named prefix from DT property
 3. CPU will be FE, CODEC will be BE with snd-soc-dummy
 4. it supports sampling rate convert via .be_hw_params_fixup
 5. board specific routing is implemented in driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 15:58:20 -07:00
Axel Lin 5116ede10d ASoC: max98925: Fix bit-width 24 settings in max98925_dai_hw_params
Trivial typo fix.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Anish Kumar <Anish.Kumar@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 13:53:49 -07:00
Bard Liao 373225510f ASoC: rt5645: Restore HP depop setting in HP off
This driver will set RT5645_DEPOP_MAN bit in headphone power up
depop process. We need to restore it in headphone power down
process. Otherwise, we will get headphone noise when push button
function is enabled.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 09:48:57 -07:00
Bard Liao 1b5d0160e8 ASoC: rt5645: Use update_bits for bit control
In codec bias level off, we need to disable gate mode with MCLK
for power saving. It is set by one bit. We don't need to write
while register for that.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 09:48:57 -07:00
Bard Liao afefc12801 ASoC: rt5645: Set use_single_rw flag for regmap
RT5645 doesn't support auto incrementing writes so driver should set
the use_single_rw flag for regmap.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 09:48:56 -07:00
Bard Liao 57bf27365c ASoC: rt5645: Redefine format config for rt5650
rt5650 and rt5645 use different register bits for format configuration.
This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support
both codecs.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 09:48:56 -07:00
Lu, Han 2c0ed63492 ASoC: Intel: fix warning reported by static check tool smatch
The smatch tool report warning:
  ...
    CHECK   sound/soc/intel/sst-haswell-pcm.c
  sound/soc/intel/sst-haswell-pcm.c:1110 hsw_pcm_probe() error: buffer overflow\
'hsw_dais' 4 <= 4
  sound/soc/intel/sst-haswell-pcm.c:1112 hsw_pcm_probe() error: buffer overflow\
'hsw_dais' 4 <= 4
  ...
fix it by use its own struct member for post-process module, rather than sharing
unused pcm member.

Signed-off-by: Lu, Han <han.lu@intel.com>
Acked-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 09:25:39 -07:00
Takashi Iwai 9d82f9272d ALSA: hda - Set use_single_rw flag for regmap
HD-audio doesn't support the bulk access.  Currently it works even
without this flag as implicitly assumed, but it's safer to set
explicitly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-27 14:07:26 +01:00
Lars-Peter Clausen 1efb53a220 ASoC: simple-card: Remove support for setting differing DAI formats
Having to set different formats on the CPU side and the CODEC side of a DAI
link is usually indication that something is terribly wrong and in most
cases is a result of a broken driver that implements a set_fmt() callback
which does not follow the specification. In the past this feature has been
used to work around broken drivers, rather than fixing them. We don't really
want to encourage this, so remove support for setting different formats on
both ends of the link.

Along the way switch to static DAI format setup by setting the the dai_fmt
field of the snd_soc_dai_link rather than calling snd_soc_dai_fmt().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-26 18:35:48 -07:00
Manish Badarkhe a57069e33f ASoC: davinci-evm: drop un-necessary remove function
As davinci card gets registered using 'devm_' api
there is no need to unregister the card in 'remove'
function.
Hence drop the 'remove' function.

Fixes: ee2f615d6e (ASoC: davinci-evm: Add device tree binding)
Signed-off-by: Manish Badarkhe <manishvb@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-26 10:01:43 -07:00
Takashi Iwai 8bc174e9e3 ALSA: hda - Handle a few verbs as read-only
Although they can be written, handle a few verbs as read-only in
regmap interface: CONFIG_DEFAULT, CONV and CVT_CHAN_COUNT.  These are
either updated in PCM or HDMI management code in a volatile manner, or
just needed only as parameter, thus they don't need to be written at
resume sync.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26 14:18:34 +01:00
Hui Wang af95b41426 ALSA: hda - Add one more node in the EAPD supporting candidate list
We have a HP machine which use the codec node 0x17 connecting the
internal speaker, and from the node capability, we saw the EAPD,
if we don't set the EAPD on for this node, the internal speaker
can't output any sound.

Cc: <stable@vger.kernel.org>
BugLink: https://bugs.launchpad.net/bugs/1436745
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26 11:04:30 +01:00
Libin Yang db48abf436 ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point
The total stream number of Sunrise Point's input and output stream
exceeds 15, which will cause some streams do not work because
of the overflow on SDxCTL.STRM field if using the legacy
stream tag allocation method.

This patch uses the new stream tag allocation method by add
the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26 07:30:13 +01:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Sergej Sawazki 8787041d9b ASoC: wm8741: Fix rates constraints values
The WM8741 DAC supports the following typical audio sampling rates:
  44.1kHz, 88.2kHz, 176.4kHz (eg: with a master clock of 22.5792MHz)
  32kHz, 48kHz, 96kHz, 192kHz (eg: with a master clock of 24.576MHz)

For the rates lists, we should use 82000 instead of 88235, 176400
instead of 1764000 and 192000 instead of 19200 (seems to be a typo).

Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-25 08:29:19 -07:00
Charles Keepax 46172b6c26 ASoC: dapm: Fix build warning
commit c66150824b ("ASoC: dapm: add code to configure dai link
parameters") introduced the following build warning:

sound/soc/soc-dapm.c: In function 'snd_soc_dapm_new_pcm':
sound/soc/soc-dapm.c:3389:4: warning: passing argument 1 of 'snprintf'
discards 'const' qualifier from pointer target type
snprintf(w_param_text[count], len,

This patch fixes this by switching to using devm_kasprintf. This also
saves a couple of lines of code.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-25 08:26:35 -07:00
W. Trevor King 4738465c37 ALSA: hda/via - Add beep controls to VIA codecs
My codec has a beep-generating node:

  $ cat /proc/asound/card1/codec#0
  Codec: VIA VT1802
  ...
  Vendor Id: 0x11068446
  Subsystem Id: 0x15587410
  Revision Id: 0x100000
  ...
  Node 0x22 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
    Amp-Out caps: ofs=0x0a, nsteps=0x12, stepsize=0x05, mute=1
    Amp-Out vals:  [0x0a]
    Power states:  D0 D1 D2 D3
    Power: setting=D0, actual=D0
  ...

But I was missing the:

  Control: name=...

entries that I need to manage this widget from alsamixer.  With this
patch (based on the similar Mono Amp-Out handling in
patch_conexant.c), I get a new:

  input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input15

entry in dmesg and controls to manage that beep:

  $ cat /proc/asound/card1/codec#0 | grep -A5 Beep
  Node 0x22 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
    Control: name="Beep Playback Volume", index=0, device=0
      ControlAmp: chs=1, dir=Out, idx=0, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
      ControlAmp: chs=1, dir=Out, idx=0, ofs=0
    Amp-Out caps: ofs=0x0a, nsteps=0x12, stepsize=0x05, mute=1
    Amp-Out vals:  [0x12]
    Power states:  D0 D1 D2 D3
    Power: setting=D0, actual=D0

[rebased and modified for the latest tree by tiwai]

Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-25 08:59:00 +01:00
Takashi Iwai 44e39b9853 ALSA: hda - Remove superfluous hda_nid_t definition in hda_codec.h
Just forgotten to remove.  It's now in sound/hdaudio.h.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-25 07:44:21 +01:00
Kuninori Morimoto 4e2576bd36 ASoC: soc-core: initialize debugfs in snd_soc_instantiate_card()
Current soc_init_card_debugfs() is called from snd_soc_register_card()
but, soc_cleanup_card_debugfs() is called from soc_cleanup_card_resources(),
not from paired function.

This differences don't matter for now. But if anyone wants to implement
a proper hotplug/unplug, this difference would become clearer.

Now, we can assume that snd_soc_instantiate_card() and
soc_cleanup_card_resources() are paired function.
soc_init_card_debugfs() / soc_cleanup_card_debugfs() paired function
should be called from these.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24 10:48:56 -07:00
Jyri Sarha a75a053f1e ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
Set rule constraints to allow only combinations of sample-rate,
sample-format, and channels counts that can be played/captured with
reasonable sample-rate accuracy.

The logic with tdm-slots and serializers (=i2s data wires) goes like
this: The first wire will take all channels up to number of tdm-slots,
before following wires (if any) are used. If the first wire is used
fully, the remaining wires share the same clocks and the divider can
be calculated for the first wire.

Also, takes the number of tdm-slots into account when implicitly
selecting the BLCK divider.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24 10:19:43 -07:00
Krzysztof Kozlowski 2f4b1e6bb2 ASoC: rsnd: Fix duplicate const for DVC ramp rates
Replace duplicated const keyword for 'dvc_ramp_rate' with proper
array of const pointers to const strings.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24 10:08:58 -07:00
Takeshi Kihara 39c2618064 ASoC: ak4642: enable stereo line output power-save mode
ak4642 has power-save mode for stereo line to reduce pop noise.
This patch enables it.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24 10:00:40 -07:00
Bard Liao 143526ee94 ASoC: rt286: check regmap_read result for ID check
It is worth to check the regmap_read result for ID check since it
is the first regmap_read. And we can check if there is any i2c
issue.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-24 08:56:13 -07:00
Krzysztof Kozlowski 46d212cbe4 ALSA: asihpi: Fix duplicate const for clock sources
Replace duplicated const keyword for 'sampleclock_sources' with proper
array of const pointers to const strings.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-24 11:51:43 +01:00
Joe Perches 9a303dc7ba sound: Deparenthesize negative error returns
Make the returns a bit more kernel standard style.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-24 11:41:37 +01:00
Howard Mitchell cd02e3df52 ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.

Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 14:38:32 -07:00
Sebastian Wicki 80b311d311 ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
This model uses the same dock port as the previous generation.

Signed-off-by: Sebastian Wicki <gandro@gmx.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 17:39:20 +01:00
Dan Carpenter 77008b70fe ALSA: echoaudio: read past end of array
We need to cap "ucontrol->id.index / num_busses_in(chip)" so the we
don't read beyond the end of the array.

I also adding a check on "in" and changing the type in
snd_echo_mixer_put() from short to unsigned int. Those changes are done
for symmetry and are cosmetic.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 14:00:28 +01:00
Dan Carpenter 034f90b393 ALSA: ak411x: simplify snd_ak4113_create() a bit
"err" is always a negative error code here, so there is no point in
checking.  Removing the check silences a static checker warning and
makes the code a bit more clear.  Also we don't need to initialize "err".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:58:59 +01:00
Takashi Iwai 40ba66a702 ALSA: hda - Add cache support for COEF read/write
The 16bit COEF read/write is pretty standard for many codecs, and they
can be cached in most cases -- more importantly, they need to be
restored at resume.  For making this easier, add the cache support to
regmap.  If the codec driver wants to cache the COEF access, set
codec->cache_coef flag and issue AC_VERB_GET_PROC_COEF with the coef
index in LSB 8 bits.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:44 +01:00
Takashi Iwai 33f8194006 ALSA: hda - Handle get/set power verb symmetrically via regmap
HD-audio has quite a few asymmetrical ways of accessing verbs, and one
of typical ones is GET/SET_POWER_STATE verbs.  While it takes only the
power state for setting, it returns a combination of states for
getting.  For making the state handling simpler, this patch adds a
code to translate the value returned from GET_POWER_STATE to return
only the actual state or -1 for error.  In that way, the driver can
simplify the power state management.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:43 +01:00
Takashi Iwai d313e0a88d ALSA: hda - Add a fake stereo amp register support
HD-audio spec is inconvenient regarding the handling of stereo volume
controls.  It can set and get only single channel at once (although
there is a special option to set the same value to both channels).
This patch provides a fake pseudo-register via the regmap access so
that the stereo channels can be read and written by a single call.
It'd be useful, for example, for implementing DAPM widgets.

A stereo amp pseudo register consists of the encoding like the normal
amp verbs but it has both SET_LEFT (bit 13) and SET_RIGHT (bit 12)
bits set.  The regmap reads and writes a 16bit value for this pseudo
register where the upper 8bit is for the right chanel and the lower
8bit for the left channel.

Note that the driver doesn't recognize conflicts when both stereo and
mono channel registers are mixed.  Mixing them would certainly confuse
the operation.  So, use carefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:42 +01:00
Takashi Iwai a551d91473 ALSA: hda - Use regmap for command verb caches, too
Like the previous patches, this patch converts also to the regmap, at
this time, the cached verb writes are the target.  But this conversion
needs a bit more caution than before.

- In the old code, we just record any verbs as is, and restore them at
  resume.  For the regmap scheme, this doesn't work, since a few verbs
  like AMP or DIGI_CONVERT are asymmetrical.  Such verbs are converted
  either to the dedicated function (snd_hda_regmap_xxx_amp()) or
  changed to the unified verb.

- Some verbs have to be declared as vendor-specific ones before
  accessing via regmap.

Also, the minor optimization with codec->cached_write flag is dropped
in a few places, as this would confuse the operation.  Further
optimizations will be brought in the later patches, if any.

This conversion ends up with a drop of significant amount of codes,
mostly the helper codes that are no longer used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:41 +01:00
Takashi Iwai 5e56bcea50 ALSA: hda - Allow driver to add vendor-specific verbs for regmap
Codecs may have own vendor-specific verbs, and we need to allow each
driver to give such verbs for cached accesses.  Here a verb can be put
into a single array and looked through it at readable and writeable
callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:41 +01:00
Takashi Iwai faa75f8a2e ALSA: hda - Use regmap for parameter caches, too
The amp hash table was used for recording the cached reads of some
capability values like pin caps or amp caps.  Now all these are moved
to regmap as well.

One addition to the regmap helper is codec->caps_overwriting flag.
This is set in snd_hdac_override_parm(), and the regmap helper accepts
any register while this flag is set, so that it can overwrite even the
read-only verb like AC_VERB_PARAMETERS.  The flag is cleared
immediately in snd_hdac_override_parm(), as it's a once-off flag.

Along with these changes, the no longer needed amp hash and relevant
fields are removed from hda_codec struct now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:40 +01:00
Takashi Iwai eeecd9d10d ALSA: hda - Use regmap for amp accesses
This patch converts the amp access functions to the regmap helpers.
The amp values were formerly cached in the own hash table.  Now it's
dropped by the regmap's cache.

The only tricky conversion is snd_hda_codec_amp_init().  This function
shouldn't do anything if the amp was already initialized.  For
achieving this behavior, a value is read once at first temporarily in
the cache-only mode.  Only if it returns an error,  i.e. the item
still doesn't exist in the cache, it proceeds to the update.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:39 +01:00
Takashi Iwai 9ba17b4d13 ALSA: hda - Implement uncached version of parameter reads
Sometimes we need the uncached reads, e.g. for refreshing the tree.
This patch provides the helper function for that and uses it for
refreshing widgets, reading subtrees and the whole proc reads.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:38 +01:00
Takashi Iwai 01ed3c06c6 ALSA: hda - Use regmap for codec parameter reads
Let's start converting the access functions to regmap.
The first one is the simplest, just converting the codec parameter
read helper function snd_hda_param_read().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:37 +01:00
Takashi Iwai 4d75faa044 ALSA: hda - Add regmap support
This patch adds an infrastructure to support regmap-based verb
accesses.  Because o the asymmetric nature of HD-audio verbs,
especially the amp verbs, we need to translate the verbs as a sort of
pseudo registers to be mapped uniquely in regmap.

In this patch, a pseudo register is built from the NID, the
AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent
to HD-audio bus but without codec address field.  OTOH, for writing,
the same pseudo register is translated to AC_VERB_SET_* automatically.
The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding
AC_VERB_GET_AMP_* verb and parameter at writing.

Some verbs has a single command for read but multiple for writes.  A
write for such a verb is split automatically to multiple verbs.

The patch provides also a few handy helper functions.  They are
designed to be accessible even without regmap.  When no regmap is set
up (e.g. before the codec device instantiation), the direct hardware
access is used.  Also, it tries to avoid the unnecessary power-up.
The power up/down sequence is performed only on demand.

The codec driver needs to call snd_hdac_regmap_exit() and
snd_hdac_regmap_exit() at probe and remove if it wants the regmap
access.

There is one flag added to hdac_device.  When the flag lazy_cache is
set, regmap helper ignores a write for a suspended device and returns
as if it was actually written.  It reduces the hardware access pretty
much, e.g. when adjusting the mixer volume while in idle.  This
assumes that the driver will sync the cache later at resume properly,
so use it carefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:36 +01:00
Takashi Iwai 71fc4c7ef5 ALSA: hda - Move generic array helpers to core lib
This will be used by the regmap support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:35 +01:00
Takashi Iwai e311782acd ALSA: hda - Re-add tracepoints to HD-audio core driver
Now let's take the basic tracepoints back to the HD-audio driver.
The three bus tracepoints, hda_send_cmd, hda_get_response and
hda_unsol_event are revived but in a slightly different form.
Since we don't assign the card number there, print the bus device name
instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:58 +01:00
Takashi Iwai c4c2533f80 ALSA: hda - Fix possible runtime PM refcount unbalance
When the driver is unloaded before the codec is bound, it still keeps
the runtime PM refcount up, and results in the unbalance.  This patch
covers these cases by introducing a flag indicating the runtime PM
initialization and handling the codec registration procedure more
properly.  It also fixes the missing input beep device as a gratis,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:48 +01:00
Takashi Iwai 0585244869 ALSA: hda - Support indirect execution of verbs
Add an overriding exec_verb op to struct hdac_device so that the call
via snd_hdac_exec_verb() can switch to a different route depending on
the setup.  The codec driver sets this field so that it can handle the
errors or applying quirks appropriately.  Furthermore, this mechanism
will be used for smooth transition for the regmap support in later
patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:37 +01:00
Takashi Iwai 3256be6537 ALSA: hda - Add widget sysfs tree
This patch changes the sysfs files assigned to the codec device on the
bus which were formerly identical with hwdep sysfs files.  Now it
shows only a few core parameter, vendor_id, subsystem_id, revision_id,
afg, mfg, vendor_name and chip_name.

In addition, now a widget tree is added to the bus device sysfs
directory for showing the widget topology and attributes.  It's just a
flat tree consisting of subdirectories named as the widget NID
including various attributes like widget capability bits.  The AFG
(usually NID 0x01) is always found there, and it contains always
amp_in_caps, amp_out_caps and power_caps files.  Each of these
attributes show a single value.  The rest are the widget nodes
belonging to that AFG.  Note that the child node might not start from
0x02 but from another value like 0x0a.

Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps,
power_caps and connections files.  The caps (representing the widget
capability bits) always contain a value.  The rest may contain
value(s) if the attribute exists on the node.  Only connections file
show multiple values while other attributes have zero or one single
value.

An example of ls -R output is like below:
% ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/:
01/  04/  07/  0a/  0d/  10/  13/  16/  19/  1c/  1f/  22/
02/  05/  08/  0b/  0e/  11/  14/  17/  1a/  1d/  20/  23/
03/  06/  09/  0c/  0f/  12/  15/  18/  1b/  1e/  21/

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01:
amp_in_caps  amp_out_caps  power_caps

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02:
amp_in_caps  amp_out_caps  caps  connections  pin_caps  pin_cfg
power_caps

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03:
.....

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:27 +01:00
Takashi Iwai 7639a06c23 ALSA: hda - Move a part of hda_codec stuff into hdac_device
Now some codes and functionalities of hda_codec struct are moved to
hdac_device struct.  A few basic attributes like the codec address,
vendor ID number, FG numbers, etc are moved to hdac_device, and they
are accessed like codec->core.addr.  The basic verb exec functions are
moved, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:17 +01:00
Takashi Iwai d068ebc25e ALSA: hda - Move some codes up to hdac_bus struct
A few basic codes for communicating over HD-audio bus are moved to
struct hdac_bus now.  It has only command and get_response ops in
addition to the unsolicited event handling.

Note that the codec-side tracing support is disabled temporarily
during this transition due to the code shuffling.  It will be
re-enabled later once when all pieces are settled down.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:02 +01:00
Takashi Iwai e3d280fc6d ALSA: hda - Make snd_hda_bus_type public
Define the common hd-audio driver and device types to bind over
snd_hda_bus_type publicly.  This allows to implement other type of
device and driver code over hd-audio bus.

Now both struct hda_codec and struct hda_codec_driver inherit these
new struct hdac_device and struct hdac_driver, respectively.

The bus registration is done in subsys_initcall() to assure it
before any other driver registrations.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:15:51 +01:00
Takashi Iwai 3372dbdd8c Merge branch 'for-next' into topic/hda-core 2015-03-23 13:14:02 +01:00
Pierre-Louis Bossart 6212755eff ASoC: Intel: remove misleading DMA error messages on Baytrail platforms
During probe, the Baytrail audio driver reports errors such as:

[44.172040] baytrail-pcm-audio baytrail-pcm-audio: error: invalid DMA engine 0
[44.172137] baytrail-pcm-audio baytrail-pcm-audio: sst_dma_new failed

Those error messages are misleading, there is no error since the DMA
is explicitly not configured for Baytrail.
Add a test to remove DMA error checks when DMA is not configured
and return silently.

Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 23:25:53 -07:00
Howard Mitchell f073faa736 ASoC: pcm512x: Fix divide by zero issue
If den=1 and pllin_rate>20MHz then den and num are adjusted to 0
causing a divide by zero error a few lines further on. Therefore
this patch correctly scales num and den such that
pllin_rate/den < 20MHz as required in the device data sheet.

Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Cc: stable@vger.kernel.org
2015-03-22 23:22:18 -07:00
David Gibson f571872671 powerpc: Move Power Macintosh drivers to generic byteswappers
ppc has special instruction forms to efficiently load and store values
in non-native endianness.  These can be accessed via the arch-specific
{ld,st}_le{16,32}() inlines in arch/powerpc/include/asm/swab.h.

However, gcc is perfectly capable of generating the byte-reversing
load/store instructions when using the normal, generic cpu_to_le*() and
le*_to_cpu() functions eaning the arch-specific functions don't have much
point.

Worse the "le" in the names of the arch specific functions is now
misleading, because they always generate byte-reversing forms, but some
ppc machines can now run a little-endian kernel.

To start getting rid of the arch-specific forms, this patch removes them
from all the old Power Macintosh drivers, replacing them with the
generic byteswappers.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-23 14:29:40 +11:00
Kuninori Morimoto f8c3c30943 ASoC: rsnd: add dai_link stream name
This patch adds missing dai_link stream_name
which is used when DPCM

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:20:51 +00:00
Kuninori Morimoto d2c4b80c5b ASoC: rsnd: show debug info for sampling rate convert
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:12:17 +00:00
Kuninori Morimoto 072bd1e7e1 ASoC: rsnd: tidyup error message format
This driver sometimes fixups debug/error message format
30cc4faf70
(ASoC: rsnd: tidyup debug message format and timing)
337b0b4c5f
(ASoC: rsnd: error meesage indicates its port)
But, it still exist un-fomated error message. This patch fixup it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:12:16 +00:00
Kuninori Morimoto 639b231f86 ASoC: rsnd: no more SRC restart when unusual situation
It will be SRC interrupt endless loop f unusual situation happen.
This patch adds restart limit for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:12:16 +00:00
Kuninori Morimoto 044930b4a6 ASoC: rsnd: no more SSI restart when unusual situation
It will be SSI interrupt endless loop f unusual situation happen.
This patch adds restart limit for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:12:15 +00:00
Fabian Frederick 33187fb4a2 ASoC: rsnd: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:06:35 +00:00
Fabian Frederick c660c0a805 ASoC: fsi: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:05:50 +00:00
Fabian Frederick f7d4bfee66 ASoC: ak4554: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:05:23 +00:00
Fabian Frederick 261e43a358 ASoC: rt5631: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:04:02 +00:00
Fabian Frederick 7f2c52afc0 ASoC: kirkwood: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:03:28 +00:00
Fabian Frederick 6ffa84df2b ASoC: fsl: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:02:56 +00:00
Howard Mitchell 4d9b13c7cc ASoC: pcm512x: Add 'Analogue' prefix to analogue volume controls
This is to ensure that 'alsactl restore' does not apply default
initialisation as the chip reset defaults are preferred.

Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-21 18:26:17 +00:00
Takashi Iwai 967b1307b6 ALSA: hda - Rename power_mgmt flag with power_save_node
David suggested that the name "power_mgmt" is too ambiguous.  Rename
the flag with a bit clearer one "power_save_node".

Also, add the corresponding description to HD-Audio.txt, too.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-20 18:31:18 +01:00
Takashi Iwai 6b275b1400 ALSA: hda - Fix power of pins used for mute LED with vrefs
Some pins are used for controlling the LED with the VREF value.
This patch changes the power behavior of such pins to be constantly
up.  A new state, pin_fixed, is introduced to nid_path to indicate
that the path contains the fixed pin.  This improves also the
readability a bit for other static routes, too.

Then a helper function snd_hda_gen_fix_pin_power() is called from the
codec driver for such fixed pins, and it will create fake paths
containing only these pins with pin_fixed=1 flag.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-20 18:30:48 +01:00
Krzysztof Kozlowski 9cd974bb0f ASoC: max98925: Constify regmap config and other codec data
Constify local structures (snd_soc_dai_ops, snd_soc_codec_driver,
regmap_config) and array (reg_defaults) which are not modified by the
driver and passed to core as pointer to const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-20 11:50:59 +00:00
Takashi Iwai fc0daafeb4 Merge branch 'topic/hda-power' into for-next 2015-03-20 09:08:01 +01:00
Fabian Frederick b24062bda7 ALSA: aoa: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-19 12:11:13 +01:00
Vinod Koul bdc455b512 ASoC: Intel: acpi_probe: fix error return path
Fix the sst_acpi_probe memory allocation error path by setting right error
code and initiating the cleanup insteadof just returning

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-19 00:57:10 +00:00
Lu, Han 5d5b275d72 Intel: ASoC: Add condition check before set param to waves
Check waves state before set parameter through ipc to prevent unexpected
operation. Also remove redundant check.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-19 00:49:11 +00:00
Jarkko Nikula 91b0d9aa93 ASoC: Intel: Remove vague commit about slave DMA config from firmware loader
Intel MID DMA driver is going to be removed, commit should be a few lines
down near to dmaengine_slave_config() call in order to not confuse and at
quick look Synopsys DesignWare does seem to use some of the slave config
structure fields (see drivers/dma/dw/core.c: dwc_config()).

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-18 11:43:26 +00:00
Jarkko Nikula 06ac0cd1c4 ASoC: Intel: Remove support for Intel MID DMA from firmware loader
Intel MID DMA driver is going to be removed by the coming commit
36111da783 ("dmaengine: intel-mid-dma: remove the driver") in spi.git
tree. Since there are no users for SST_DMA_TYPE_MID type the support for it
can be removed from here in advance.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-18 11:43:26 +00:00
Takashi Iwai 5ccf835cc7 ALSA: hda - Adjust power of beep widget and outputs
As the widget PM may turn off the pins, this might lead to the silent
output for beep when no explicit paths are given.  This patch adds
fake output paths for the beep widget so that the output pins are
dynamically powered upon beep on/off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 09:23:10 +01:00
Takashi Iwai 688b12cc3c ALSA: hda - Use the new power control for VIA codecs
VIA codecs used to have the own power controls but they were disabled
at transition to the generic parser due to the coding assuming the
fixed routes.  Now we get the proper support of equivalently fine
power management in the generic parser, and the old kludges can be
replaced with it.  This results in the reduction of lots of dead
codes.

The advanced PM feature is disabled as default like before for keeping
the compatible behavior.  It's enabled via "Dynamic Power-Control"
mixer element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 09:22:35 +01:00
Takashi Iwai e6feb5d085 ALSA: hda - Support advanced power state controls
This patch enables the finer power state control of each widget
depending on the jack plug state and streaming state in addition to
the existing power_down_unused power optimization.  The new feature is
enabled only when codec->power_mgmt flag is set.

Two new flags, pin_enabled and stream_enabled, are introduced in
nid_path struct for marking the two individual power states: the pin
plug/unplug and DAC/ADC stream, respectively.  They can be set
statically in case they are static routes (e.g. some mixer paths),
too.

The power up and down events for each pin are triggered via the
standard hda_jack table.  The call order is hard-coded, relying on the
current implementation of jack event chain (a la FILO/stack order).

One point to be dealt carefully is that DAC/ADC cannot be powered
on/off while streaming.  They are pinned as long as the stream is
running.  For controlling the power of DAC/ADC, a new patch_ops is
added.  The generic parser provides the default callback for that.

As of this patch, only IDT/Sigmatel codec driver enables the flag.
The support on other codecs will follow.

An assumption we made in this code is that the widget state (e.g. amp,
pinctl, connections) remains after the widget power transition (not
about FG power transition).  This is true for IDT codecs, at least.
But if the widget state is lost at widget power transition, we'd need
to implement additional code to sync the cached amp/verbs for the
specific NID.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 09:22:28 +01:00
Clément Guedez 1aa9a4ea4f ALSA: ice1724: ESI W192M: Add sampling rate control of the ADC/DAC
Add sampling rate control for ADC/DAC for ESI W192M.
Allow to switch between 48K/96K/192K sampling rate.
All DAC need to be mute when changing samplerate.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:07:00 +01:00
Clément Guedez ae8a9a1125 ALSA: ice1724: ESI W192M: Add text Line in/Mic for selecting input gain state
Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:06:25 +01:00
Clément Guedez 16ddbe738a ALSA: ice1724: ESI W192M: Add TLV support for control value in dB scale
Add TLV support to control volume using dB scale for input and ouput on ESI W192M.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:05:48 +01:00
Clément Guedez f8a8b3a835 ALSA: ice1724: ESI W192M: Enable midi i/o of port envy24 chip as available
Enable midi i/o port of envy24 chip as their are available on ESI W192M soundcard.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:05:30 +01:00
Clément Guedez 7127744a5e ALSA: ice1724: ESI W192M: Update eeprom structure to C99 standard
Update eeprom structure to C99 standard to be compliant with change in alsa.
It's just a notation change, no configuration change.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:05:07 +01:00
Clément Guedez b56df151d3 ALSA: ice1724: ESI W192M: Correct copy/paste from prodigy driver
Correct copy/paste name from prodigy driver, no behaviour change, only name.

Signed-off-by: Clément Guedez <klem.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-18 08:04:52 +01:00
Nikesh Oswal c66150824b ASoC: dapm: add code to configure dai link parameters
dai-link params for codec-codec links were fixed. The fixed
link between codec and another chip which may be another codec,
baseband, bluetooth codec etc may require run time configuaration
changes. This change provides an optional alsa control to select
one of the params from a list of params.

Signed-off-by: Nikesh Oswal <nikesh@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 22:54:54 +00:00
Takashi Iwai fb83b63510 ALSA: hda - Simplify PCM setup overrides
This patch does two things:
- code refactoring with a local helper function,
- allow codec drivers to provide the specific PCM stream info pointers
  only for overriding the non-NULL entries, instead of copying the
  whole.

This simplifies the codec driver side (currently the only user is
alc269's 44kHz fixed rate).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-17 20:57:20 +01:00
Takashi Iwai 3fc6c5a1cf ASoC: Fixes for v4.0
As well as the usual collection of driver specific fixes there's a few
 more generic things:
 
  - Lots of fixes from Takashi for drivers using the wrong field in the
    control union to communicate with userspace, leading to potential
    errors on 64 bit systems.
  - A fix from Lars for locking of the lists of devices we maintain,
    mostly only likely to trigger during device probe and removal.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVCA+HAAoJECTWi3JdVIfQ6oQIAIOFlrPzKpI3C7MqrK6F+ySC
 g/JOf8XZKbStl+RdSu/RI6gL1Nc4VD7EHv5vEM2Br6KtUHQMoQYpsSiPvn1BFJBX
 EkwY3eoDiIyPqQG7cGmdIF/8NXiZgJYh13coamrkdAhBFMXfmqlbrBHo71Z6o1ic
 cg4rng3AmjyJ1NfUDsMW/KTX0F8AUTw7yYs+B4pyjfRBFVmhmzubXGXNjiW+/Tz4
 zjk9c3Qm7ZxC66dbvg5lpIakwbRtX26p7Fn+pWOewL4y81y9qruSvV6IgDZ1RO95
 DRtLsU7qyIK3G9zCw61xJNiL2QAfgOfYYgi7R6XrlS3nttIFT30oELw5ObwjSM0=
 =iSeG
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.0

As well as the usual collection of driver specific fixes there's a few
more generic things:

 - Lots of fixes from Takashi for drivers using the wrong field in the
   control union to communicate with userspace, leading to potential
   errors on 64 bit systems.
 - A fix from Lars for locking of the lists of devices we maintain,
   mostly only likely to trigger during device probe and removal.
2015-03-17 16:30:26 +01:00
Kuninori Morimoto 379c4b05db ASoC: ak4642: tidyup DAPM route for playback
It needs DAC -> Playback route instead of direct settings via
SND_SOC_DAPM_DAC. otherwise, it can't find correct path if
sound card used prefix name

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 12:22:27 +00:00
Jin Yao 6b3b58d97f ASoC: Intel: move the jack creation to Braswell machine driver
The jack creation code was in rt5670 codec driver before due to the
jack resources (gpio/irq) were defined under the node of codec device
in ACPI on Braswell. We used the snd_soc_jack_new() to create a jack
instance.

But now snd_soc_jack_new() is removed from upstream and we can't
use snd_soc_card_jack_new() in codec driver, so we move the jack
creation code to machine driver and pass the jack instance to codec
driver for further processing.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 12:17:13 +00:00
Jin Yao 066d7b87fa ASoC: Intel: Add suspend_pre and resume_post for Braswell snd_soc_card
On Braswell, we need to add some machine specific setting before suspend
and after resume. For example, disable/enable jack detection in codec so
use snd_soc_card suspend_pre and resume_post ops for this purpose.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 12:17:13 +00:00
Mark Brown 3ee5990d08 Merge branch 'topic/jack' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2015-03-17 12:16:27 +00:00
Mark Brown 275ed3a195 Merge branch 'topic/rt5670' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2015-03-17 12:16:16 +00:00
Lars-Peter Clausen f263fa3e0f ASoC: wm2200: Drop unnecessary dapm bias_level initialization
The default value for the bias_level is SND_SOC_BIAS_OFF when probe is being
called, there is no need to initialize it explicitly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 12:09:41 +00:00
Lars-Peter Clausen 0dd96b3e39 ASoC: rt286: Drop unnecessary dapm bias_level initialization
The default value for the bias_level is SND_SOC_BIAS_OFF when probe is being
called, there is no need to initialize it explicitly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 12:09:13 +00:00
Songjun Wu 99d4223413 ASoC: wm8731: let codec to manage clock by itself
Enable WM8731 to support common clock framework.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 15:00:39 +00:00
Takashi Iwai 2a557a861a Merge branch 'topic/hda-unbind' into for-next 2015-03-16 14:48:20 +01:00
Takashi Iwai 8f88f0256f Merge branch 'topic/hda-bus' into for-next 2015-03-16 14:48:16 +01:00
Takashi Iwai 34e72afe73 Merge branch 'for-linus' into for-next 2015-03-16 14:48:05 +01:00
Takashi Iwai cc261738ad ALSA: hda - Treat stereo-to-mono mix properly
The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for
mono channel widgets] fixed the handling of mono widgets in general,
but it still misses an exceptional case: namely, a mono mixer widget
taking a single stereo input.  In this case, it has stereo volumes
although it's a mono widget, and thus we have to take care of both
left and right input channels, as stated in HD-audio spec ("7.1.3
Widget Interconnection Rules").

This patch covers this missing piece by adding proper checks of stereo
amps in both the generic parser and the proc output codes.

Reported-by: Raymond Yau <superquad.vortex2@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-16 14:44:03 +01:00
Mark Brown 33484c6739 Merge remote-tracking branches 'asoc/fix/sgtl5000' and 'asoc/fix/sn95031' into asoc-linus 2015-03-16 12:03:17 +00:00
Mark Brown af6b7a82fd Merge remote-tracking branches 'asoc/fix/ak4671', 'asoc/fix/control', 'asoc/fix/da732x', 'asoc/fix/fsl-ssi', 'asoc/fix/lock' and 'asoc/fix/rt286' into asoc-linus 2015-03-16 12:03:15 +00:00
Mark Brown 016e81f202 Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 2015-03-16 12:03:14 +00:00
Oder Chiou c36aa0a192 ASoC: rt5677: add API to select ASRC clock source
This patch defines an API to select the clock source for specified filters.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 12:02:56 +00:00
Lars-Peter Clausen fa41181fe3 ASoC: nuc900: No need to track the dma buffer in the driver state struct
The DMA buffer and address can be accessed through the snd_pcm_runtime.
There is no need to manually track them in the driver's state struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:40:52 +00:00
Lars-Peter Clausen 6b5b042d4c ASoC: Make snd_soc_dapm_kcontrol_codec() inline
snd_soc_dapm_kcontrol_codec() is a extremely simple function and inlining it
typically results in less code than necessary for calling the non-inlined
version of the function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:40:24 +00:00
Kenneth Westfield 6a32888589 ASoC: Allow for building QCOM drivers
Allow for the Qualcomm Technologies ASoC drivers
to build.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:24:47 +00:00
Kenneth Westfield f380dd3f3c ASoC: qcom: Add ability to build QCOM drivers
Define the LPASS platform driver, the LPASS
CPU DAI driver and the Storm machine driver
configurations, and how to build them.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:24:47 +00:00
Kenneth Westfield 79119c7986 ASoC: qcom: Add Storm machine driver
Add machine driver for the Storm board with the
IPQ806X SOC connected to the MAX98357A DAC.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:24:47 +00:00
Kenneth Westfield 8ebe148be9 ASoC: qcom: Modify test for DSP in LPASS driver
As the representation of the DSP in the device
tree has changed from a required subnode to an
optional phandle, modify the test for DSP
existence in the LPASS CPU DAI driver,
accordingly.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:06:38 +00:00
Linus Torvalds 1ee89c519a The clk fixes for 4.0-rc4 comprise three themes. First are the usual
driver fixes for new regressions since v3.19. Second are fixes to the
 common clock divider type caused by recent changes to how we round clock
 rates. This affects many clock drivers that use this common code.
 Finally there are fixes for drivers that improperly compared struct clk
 pointers (drivers must not deref these pointers). While some of these
 drivers have done this for a long time, this did not cause a problem
 until we started generating unique struct clk pointers for every
 consumer. A new function, clk_is_match was introduced to get these
 drivers working again and they are fixed up to no longer deref the
 pointers themselves.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVBewEAAoJEKI6nJvDJaTUR2gP/2frIXCm/krwkDyofIGxxQ+F
 RwIXFTn9GG9QEUwKLUcxRUegHbWbZMXYp6W19hUcUdYz3pD+uEJSuH0NI8kW1Ohy
 32P5/ALuoTq7OVzBBz/9di9jBDdIM1wusLZGJfOWk9DXBLOS3VHuhN55D47dqWS/
 GsszeEpp8r1WBKFVmAkuQ5Jc0CqgS5GxvMOndXXVN3kDMhCT+9pBiqtUT0V3YV/J
 d5GCvfPlO/Xmjnpjf99MPButkfiW/o6YXt3H0QY6hhskS1Av8alyfabVctk8lqOW
 py8SQFY7MdRLZ84Zk87sqKCKUc/vHkTBT9vKWYm65l3yJ5OEFv60NaFMYY61HVlJ
 n6qWU6SbFZvkPnQTJn6Ii/v7BQ92bXjYpLNcBK8UY35jIjmHsPS/YXCbkmArtn1N
 /yAB4TIfH8uX93smFb3XEmZLSiKFuZAhU8YbjDzYgsGuQ9EwN3aNP9c5mzC7Soou
 tYnDqVic0i993qQTD2Db5dplGwxelCRJpazO2kK6NW/EJzE8XJaM6XVy1xIBKiDX
 bbWPdp53/eWV7gbUEZ8zzcS06G/DLw5/N45XyaWIx+2ThDjhOAlVHTAFDY+Oa743
 42Dkwtr5GZ6yORyXY1wI5HttUGU0gnPN0kM84GQG8O/GbzGureZSW1e6G7tJJljn
 JXhROl0w4aIPwUUxry7R
 =nc5C
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clock framework fixes from Michael Turquette:
 "The clk fixes for 4.0-rc4 comprise three themes.

  First are the usual driver fixes for new regressions since v3.19.

  Second are fixes to the common clock divider type caused by recent
  changes to how we round clock rates.  This affects many clock drivers
  that use this common code.

  Finally there are fixes for drivers that improperly compared struct
  clk pointers (drivers must not deref these pointers).  While some of
  these drivers have done this for a long time, this did not cause a
  problem until we started generating unique struct clk pointers for
  every consumer.  A new function, clk_is_match was introduced to get
  these drivers working again and they are fixed up to no longer deref
  the pointers themselves"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  ASoC: kirkwood: fix struct clk pointer comparing
  ASoC: fsl_spdif: fix struct clk pointer comparing
  ARM: imx: fix struct clk pointer comparing
  clk: introduce clk_is_match
  clk: don't export static symbol
  clk: divider: fix calculation of initial best divider when rounding to closest
  clk: divider: fix selection of divider when rounding to closest
  clk: divider: fix calculation of maximal parent rate for a given divider
  clk: divider: return real rate instead of divider value
  clk: qcom: fix platform_no_drv_owner.cocci warnings
  clk: qcom: fix platform_no_drv_owner.cocci warnings
  clk: qcom: Add PLL4 vote clock
  clk: qcom: lcc-msm8960: Fix PLL rate detection
  clk: qcom: Fix slimbus n and m val offsets
  clk: ti: Fix FAPLL parent enable bit handling
2015-03-15 15:07:08 -07:00
Takashi Iwai b2a0bafa75 ALSA: hda - Use shutdown driver ops instead of reboot notifier
The driver shutdown ops is simpler than registering reboot notifier
manually.  There should be no functional change by this -- the codec
driver calls its own callback while the bus driver just calls
azx_stop() like before.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-13 15:28:58 +01:00
Bard Liao b52551e0d0 ASoC: rt5645: Remove adc stereo2 filter
Remove adc stereo2 filter since it is not in rt5645/rt5650 codec.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-13 11:13:16 +00:00
Takashi Iwai ef403edb75 ALSA: hda - Don't access stereo amps for mono channel widgets
The current HDA generic parser initializes / modifies the amp values
always in stereo, but this seems causing the problem on ALC3229 codec
that has a few mono channel widgets: namely, these mono widgets react
to actions for both channels equally.

In the driver code, we do care the mono channel and create a control
only for the left channel (as defined in HD-audio spec) for such a
node.  When the control is updated, only the left channel value is
changed.  However, in the resume, the right channel value is also
restored from the initial value we took as stereo, and this overwrites
the left channel value.  This ends up being the silent output as the
right channel has been never touched and remains muted.

This patch covers the places where unconditional stereo amp accesses
are done and converts to the conditional accesses.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-13 07:37:21 +01:00
Takashi Iwai e79d74ab25 ALSA: control: Fix breakage of user ctl element addition
In the commit [2225e79b9b03: 'ALSA: core: reduce stack usage related
to snd_ctl_new()'], the id field of the newly added kctl is untouched,
thus all attribute like name string remain empty.  The fix is just to
add the forgotten memcpy of the id field.

Fixes: 2225e79b9b ('ALSA: core: reduce stack usage related to snd_ctl_new()')
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-13 07:21:51 +01:00
Takashi Iwai 2ddee91abe ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic
MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the
built-in mic records only the right channel.  Apply the same
workaround as MBP8,1 to spread the mono channel via a Cirrus codec
vendor-specific COEF setup.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 20:50:32 +01:00
Takashi Iwai bad994f5b4 ALSA: hda - Set single_adc_amp flag for CS420x codecs
CS420x codecs seem to deal only the single amps of ADC nodes even
though the nodes receive multiple inputs.  This leads to the
inconsistent amp value after S3/S4 resume, for example.

The fix is just to set codec->single_adc_amp flag.  Then the driver
handles these ADC amps as if single connections.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 20:28:04 +01:00
Anish Kumar 718b25c803 ASoC: max98925: trivial duplicate typo fix in set_fmt
Signed-off-by: Anish Kumar <yesanishhere@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 19:20:06 +00:00
Bard Liao 42ce5b8ab8 ASoC: rt5645: Add TDM support for rt5650
rt5650 and rt5645 use different register bits for TDM configuration.
This patch modifies rt5645_set_tdm_slot to support both codecs.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 19:19:10 +00:00
Lu, Han 3814c20444 ASoC: Intel: add kcontrol to set parameter to sound effect module waves
Each kcontrol command includes a line of parameters up to 128 bytes.
kcontrol command to set param:
    cset "name='Waves Set Param' <0x01,0xff,...>"
or
    cset-bin-file "name='Waves Set Param' <path/to/binary/config/file>"

The parameter lines are stored in a buffer array, so can be read back from
buffer rather than from DSP, and be relaunched to DSP when resume from RTD3.
The buffer size is 160 parameter lines.
kcontrol command to reset the buffer:
    cset "name='Waves Set Param' 0xff"

alsa-lib v1.0.29 or commit 6ea14c36 and f47480af are required to support the
kcontrol commands.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 19:18:14 +00:00
Lu, Han 201892268b ASoC: Intel: add function to set parameter to sound effect module waves
Add function to set parameters to module waves. The parameters can be set
only when module is enabled, and parameter size is limited to 500 Bytes.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 19:18:14 +00:00
Lu, Han 76c07b8265 ASoC: Intel: add kcontrol to enable/disable sound effect module waves
Add kcontrol to enable/disable module waves. IPC is valid only when module
is loaded. Also track module state over suspend so it's state can be restored
on resume.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 19:18:14 +00:00
Lars-Peter Clausen 66454b3eb3 ASoC: rt5670: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 10:12:58 +00:00
Daniel Mack fcdcd1dec6 ALSA: snd-usb: add quirks for Roland UA-22
The device complies to the UAC1 standard but hides that fact with
proprietary descriptors. The autodetect quirk for Roland devices
catches the audio interface but misses the MIDI part, so a specific
quirk is needed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Rafa Lafuente <rafalafuente@gmail.com>
Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 10:19:49 +01:00
Takashi Iwai e6826ef145 Merge branch 'for-linus' into for-next 2015-03-12 07:38:46 +01:00
Takashi Iwai be3bb8236d ALSA: control: Add sanity checks for user ctl id name string
There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus.  This patch adds more sanity checks of id strings.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-12 07:36:38 +01:00
Shawn Guo aaa6d06282 ASoC: kirkwood: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:41 -07:00
Shawn Guo 81efec8514 ASoC: fsl_spdif: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:22 -07:00
kbuild test robot 10dcc448d1 ASoC: max98925_spk_tlv can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 19:16:07 +00:00
Anish Kumar 1ff2765182 ASoC: Add max98925 codec driver
Signed-off-by: Anish Kumar <yesanishhere@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 19:16:07 +00:00
Julia Lawall b3f5dbec2f ASoC: ab8500-codec: don't export static symbol
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@

-EXPORT_SYMBOL_GPL(f);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 18:28:49 +00:00
Takashi Iwai ddb6ca75b5 ALSA: hda - Fix built-in mic on Compaq Presario CQ60
Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the
built-in mic NID 0x17 instead of NID 0x1d, and it results in the
non-working mic.  This patch just remaps the pin correctly via fixup.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-11 16:05:19 +01:00
Lu, Han e8e79ede44 ASoC: Intel: add function to enable/disable sound effect module waves
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:53:45 +00:00
Lu, Han 8c43fc2fdd ASoC: Intel: add function to load sound effect module waves
Try to load module waves and allocate runtime blocks for it if the firmware
image of module waves exists.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:53:45 +00:00
Lu, Han 9449d39b99 ASoC: Intel: add function to load firmware image
Add a general method to load firmware image, and apply to base firmware
image loading. With the method, the driver will support loading multiple
different modules in order to support different features.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:53:44 +00:00
Mark Brown 357635ae01 Merge branch 'fix/intel' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2015-03-11 12:53:41 +00:00
Mark Brown 11dd60447e Linux 4.0-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
 mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
 kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
 fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
 V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
 qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
 =Xkue
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc3' into asoc-intel

Linux 4.0-rc3
2015-03-11 12:53:25 +00:00
Bard Liao cc3c340d28 ASoC: rt5670: export jack suspend/resume APIs
We force enable "Mic Det Power" when a jack is inserted. Also, we
set codec idle_bias_off = true. As a result, codec driver will not
suspend as we expect.

On Braswell, we don't need the jack detection when suspend but need
it after resume, so export the jack suspend/resume APIs which are
provided for machine driver to control during suspend/resume.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:08:20 +00:00
Bard Liao d3ef705434 ASoC: rt5670: Add IRQ function
This patch adds the IRQ function support of rt5670. We use a flag
named dev_gpio in platform data to inform codec driver if the IRQ
function is used or not. Also, we export rt5670_set_jack_detect
for machine driver to pass the jack point.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:08:20 +00:00
Kuninori Morimoto 530b7b4a52 ASoC: rsnd: add regmap_config::name for debugfs
Renesas sound driver needs SSI/SRC/DVC regmaps, but it didn't have
regmap_config::name for devm_regmap_init_mmio().
Thus, debugfs initialization code tried to use same driver name
many times, and failed.
This patch adds eacy own name for regmap_config::name

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 11:56:51 +00:00
Kuninori Morimoto 8537483a17 ASoC: rsnd: recover PIO mode for new dma interface
Renesas sound driver needs 1st/2nd DMA interface,
and 1st DMA is using DMAEngine, and 2nd is using local method now.
2nd DMA had been DMAEngine, but it was moved to local method by previous
patchset. But then, it lost PIO mode fallback when probe.
this patch recovers it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 11:56:50 +00:00
Geert Uytterhoeven 6ec6fb6f23 ASoC: rsnd: Use %pad to print dma_addr_t in rsnd_dmapp_init()
sound/soc/sh/rcar/dma.c: In function 'rsnd_dmapp_init':
sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=]
  dev_dbg(dev, "id/src/dst/chcr = %d/%x/%x/%08x\n",
  ^
sound/soc/sh/rcar/dma.c:341:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]

Fixes: 288f392e72 ("ASoC: rsnd: add Audio DMAC peri peri support rework")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 11:56:42 +00:00
Takashi Iwai 4945f1fdc1 ALSA: seq: Fix init order of snd_seq_device stuff
When the sequencer driver is built in kernel, it may panic at boot
because of the uninitialized snd_seq_bus_type.  Initialize it properly
via subsys_initcall() instead of module_init() to assure that the bus
is registered beforehand.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 7c37ae5c62 ('ALSA: seq: Rewrite sequencer device binding with standard bus')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-11 12:53:52 +01:00
Jin Yao 8d0c38a3f2 ASoC: Intel: move sysclk source setting to platform_clock_control for balance.
A playback noise happens after suspend/resume on Braswell. The issue is due to
the codec PLL and codec ASRC are not enabled correctly due to the incorrect
sysclk setting after resume. This patch resets the sysclk source setting in
platform clock control widget handler.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 20:40:51 +00:00
Takashi Iwai 87a8b286e2 ASoC: wm9713: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:22 +00:00
Takashi Iwai 4b0b669b86 ASoC: wm9712: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:22 +00:00
Takashi Iwai b4a18c8b1a ASoC: wm8960: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:21 +00:00
Takashi Iwai 07892b1035 ASoC: wm8955: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:21 +00:00
Takashi Iwai eaddf6fd95 ASoC: wm8904: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:21 +00:00
Takashi Iwai 24cc883c1f ASoC: wm8903: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:20 +00:00
Takashi Iwai bd14016fbf ASoC: wm8731: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:20 +00:00
Takashi Iwai 00a14c2968 ASoC: wm2000: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:19 +00:00
Takashi Iwai 4c523ef611 ASoC: tas5086: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:16 +00:00
Takashi Iwai d7f58db49d ASoC: pcm1681: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:13 +00:00
Takashi Iwai d223b0e7fc ASoC: es8238: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:09 +00:00
Takashi Iwai e8371aa0fe ASoC: cs4271: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:15:02 +00:00
Takashi Iwai 08641d9b7b ASoC: ak4641: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:14:59 +00:00
Takashi Iwai 2bf4c1d483 ASoC: adav80x: Fix wrong value references for boolean kctl
The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-03-10 20:12:57 +00:00
Takashi Iwai ec0e9937aa ALSA: core: Drop superfluous error/debug messages after malloc failures
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:42:14 +01:00
Takashi Iwai 24db8bbaa3 ALSA: seq: Drop superfluous error/debug messages after malloc failures
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:41:18 +01:00
Takashi Iwai 8d98a0673f ALSA: seq_oss: Drop superfluous error/debug messages after malloc failures
The kernel memory allocators already report the errors when the
requested allocation fails, thus we don't need to warn it again in
each caller side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:39:55 +01:00
Takashi Sakamoto 2225e79b9b ALSA: core: reduce stack usage related to snd_ctl_new()
The callers of snd_ctl_new() need to have 'struct snd_kcontrol' data,
and pass the data as template. Then, the function allocates the structure
data again and copy from the template. This is a waste of resources.
Especially, the callers use large stack for the template.

This commit removes a need of template for the function, thus, changes
the prototype of snd_ctl_new(). Furthermore, this commit changes
the code of callers, snd_ctl_new1() and snd_ctl_elem_add() for better
shape.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:29:59 +01:00
Takashi Sakamoto 4ed56666b7 ALSA: core: use precomputed table to check userspace control params
The parameters can be decided in compile time.

This commit adds precomputed table to reduce calculating time.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:27:57 +01:00
Takashi Sakamoto 59294a01d7 ALSA: firewire-lib: leave unit reference counting completely
With previous commit, this module managed to leave the counting to each
drivers, but the isochronous resources functionality still increment/decrement
the count.

This commit purge such codes to leave the responsibility to each drivers.

Fix: c6f224dc20 ('ALSA: firewire-lib: remove reference counting')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:27:19 +01:00
Takashi Sakamoto 5b1274efe2 Revert "ALSA: dice: fix wrong offsets for Dice interface"
This reverts commit 8cdebf7109.

The reverted commit breaks out-stream functionality of Dice driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:26:25 +01:00
Yannick Guerrini ce99198131 ALSA: firewire: Fix trivial typos in comments
Change 'propper' to 'proper'
Change 'paramters' to 'parameters'
Change 'SYT_INTEVAL' to 'SYT_INTERVAL'
Change 'aligh'/'alighed' to 'align'/'aligned'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 12:40:30 +01:00
Mark Brown eb5bc2a213 Linux 4.0-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
 mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
 kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
 fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
 V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
 qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
 =Xkue
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc3' into asoc-rt5670

Linux 4.0-rc3

Conflicts:
	sound/soc/codecs/rt5670.c
2015-03-10 10:37:02 +00:00
Dmitry Torokhov f580f8afd0 ASoC: tlv320aic23: remove incorrect __exit markups
Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:24:44 +00:00
Dmitry Torokhov 3255639450 ASoC: cx20442: remove incorerct __exit markups
Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:22:58 +00:00
Nicholas Mc Guire 78bb997ace ASoC: wm2200: match wait_for_completion_timeout return type
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:18:34 +00:00
Nicholas Mc Guire 905a808664 ASoC: wm5100: match wait_for_completion_timeout return type
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:18:13 +00:00
Nicholas Mc Guire 17f4ad601d ASoC: arizona: match wait_for_completion_timeout return type
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:18:07 +00:00
Nicholas Mc Guire 159366ea38 ASoC: wm8996: ensure lower bounds of 1 for timeout
wait_for_completion_timeout can be called with timeout == 0 due to
msecs_to_jiffies(2) == 1 for HZ < 1000 and usecs_to_jiffies(300) == 1
for all reasonable values of HZ, thus the following timeout /= 2; sets
timeout to 0. This patch simply adds a lower-bounds of 1.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:15:56 +00:00
Nicholas Mc Guire 62c76fe2e5 ASoC: wm8996: match wait_for_completion_timeout return type
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up
in case of completion occurring the remaining time is >=1 so ret is set to
1 if no timeout occurred.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:15:44 +00:00
Bard Liao 485372dc24 ASoC: rt5670: Check sysclk source by private data
Currently, is_sys_clk_from_pll check sysclk source by reading codec
register value. And it will be invoked before updating dapm widget
power. In some machine driver, snd_soc_dai_set_sysclk is called in
dapm event to switch codec sysclk to RC clock in idle mode. And in
some use cases (such as syspend/resume) hw_params will not be called
when the dapm widget is powered up. As a result, is_sys_clk_from_pll
will return 0 although it is supposed to be 1.
To solve this, we let is_sys_clk_from_pll check sysclk sysclk_src
which is stored in private data and don't change the value of sysclk_src
when codec sysclk is switched to internal clock. The internal clock
can only be used in idle mode, so it sould be fine if we don't set
sysclk_src to internal clock.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:12:48 +00:00
Bard Liao bd22f9d405 ASoC: rt5670: Revert Keep sysclk on patch
The "Keep sysclk on if JD func is used" patch force enable/disable
pin in rt5670_set_dai_sysclk. But some machine driver call it in
dapm widget event. It will cause kernel crash.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:12:48 +00:00
Zubair Lutfullah Kakakhel 967beb2e87 ASoC: jz4740: Add jz4780 support
The jz4780 and jz4740 have very similar i2s blocks.

The slight difference is in Rx/Tx fifos.
And the bitclocks for input/output are different.

This patch adds jz4780 support to the driver

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:10:17 +00:00
Takashi Iwai 4aa01c408b Merge branch 'for-linus' into for-next
Merging the HD-audio fixes back to base devel branch for further
working on it.
2015-03-09 08:42:00 +01:00
Takashi Iwai a1f3f1ca66 ALSA: hda - Fix regression of HD-audio controller fallback modes
The commit [63e51fd708f5: ALSA: hda - Don't take unresponsive D3
transition too serious] introduced a conditional fallback behavior to
the HD-audio controller depending on the flag set.  However, it
introduced a silly bug, too, that the flag was evaluated in a reverse
way.  This resulted in a regression of HD-audio controller driver
where it can't go to the fallback mode at communication errors.

Unfortunately (or fortunately?) this didn't come up until recently
because the affected code path is an error handling that happens only
on an unstable hardware chip.  Most of recent chips work stably, thus
they didn't hit this problem.  Now, we've got a regression report with
a VIA chip, and this seems indeed requiring the fallback to the
polling mode, and finally the bug was revealed.

The fix is a oneliner to remove the wrong logical NOT in the check.
(Lesson learned - be careful about double negation.)

The bug should be backported to stable, but the patch won't be
applicable to 3.13 or earlier because of the code splits.  The stable
fix patches for earlier kernels will be posted later manually.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021
Fixes: 63e51fd708 ('ALSA: hda - Don't take unresponsive D3 transition too serious')
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-09 08:41:13 +01:00
Lars-Peter Clausen 778952598e ASoC: Remove unnecessary device_remove_file()
Since commit d29697dc3b ("ASoC: Add sysfs entries via static attribute
groups") the sysfs attributes of the rtd are manged by the device core and
there is no need to manually call device_remove_file() anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-08 19:46:26 +00:00
Lars-Peter Clausen 34e81ab455 ASoC: Fix component lists locking
Any access to the component_list, codec_list and platform_list needs to be
properly locked by the client_mutex. Otherwise undefined behavior can occur
if the list is modified in one thread and concurrently accessed from another
thread.

This patch adds the missing locking to the debugfs file handlers that
display the registered components, as well as the various components
unregister functions.

Furthermore the client_lock is now held for the whole
snd_soc_instantiate_card() sequence to make sure that component removal does
not race against the card registration.

Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-08 19:45:55 +00:00
Kuninori Morimoto 72adc61f46 ASoC: rsnd: 1st DMAC dma-names cares subnode
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.

dma-names on DT was implemented as no difference between 1st / 2nd
DMAC's, since rsnd had assumed that both DMACs are implemented as
DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented
as non DMAEngine, and it doesn't need dma-names anymore. So, this
dma-names rule is no longer needed.

And additionally, dma-names was assumed that it has all
(= SSI/SSIU/SRC/DVC) nodes under sound node.

In upstream code, no SoC/platform is supporting DMA for rsnd driver yet.
This means there is no compatible issue if this patch changes
dma-names's rule of DT.

This patch assumes dma-names for 1st DMAC are tx/rx base, and listed
in each SSI/SRC/DVC subnode
ex)
	rcar_sound,dvc {
		dvc0: dvc@0 {
			dmas = <&audma0 0xbc>;
			dma-names = "tx";
		};
	...

	rcar_sound,src {
		src0: src@0 {
			...
			dmas = <&audma0 0x85>, <&audma1 0x9a>;
			dma-names = "rx", "tx";
		};
	...

	rcar_sound,ssi {
		ssi0: ssi@0 {
			...
			dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
			dma-names = "rx", "tx", "rxu", "txu";
		};
	...

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 93b986e246 ASoC: rsnd: dvc: add rsnd_dvc_of_node()
This patch adds rsnd_dvc_of_node() to get DVC subnode from DT.
This is prepare for new DT bindings for 1st DMAC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 82e76ed38e ASoC: rsnd: src: add rsnd_src_of_node()
This patch adds rsnd_src_of_node() to get SRC subnode from DT.
This is prepare for new DT bindings for 1st DMAC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 04e627baa6 ASoC: rsnd: ssi: add rsnd_ssi_of_node()
This patch adds rsnd_ssi_of_node() to get SSI subnode from DT.
This is prepare for new DT bindings for 1st DMAC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto e879a9ddf4 ASoC: rsnd: enable rsnd_ssi_use_busif() for DMA
Renesas R-Car sound driver uses SSI, but the DMA interfaces are
SSI/SSIU. This interface is based on SSI/SRC/DVC connection.
And DMA function needs to know which interface is used somehow.
This patch enables rsnd_ssi_use_busif() for DMA.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 0d00a52182 ASoC: rsnd: use union with rsnd_dmaen / rsnd_dmapp
Renesas R-Car needs 2 DMACs.1st DMAC is DMAEngine, and 2nd DMAC is
implemented as local code. These 2 DMACs are never shared.
We can use union for these.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto aaf4fce019 ASoC: rsnd: remove rsnd_dma::dir
DMAEngine direction can be calculated from rsnd_dai_stream,
So, rsnd_dma::dir does not make sense now.
Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 56f2906ae2 ASoC: rsnd: remove rsnd_dma::addr
DMAEngine for Renesas R-Car driver is used only for Audio DMAC now.
rsnd_dma::addr was added to support Audio DMAC peri peri,
but it is no longer needed. Let's remove it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 288f392e72 ASoC: rsnd: add Audio DMAC peri peri support rework
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri is controlled from sound driver without DMAEngine
by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:30 +00:00
Kuninori Morimoto 3c68565b6c ASoC: rsnd: enable to care 1st / 2nd DMAC on rsnd_dma_xxx()
rsnd driver needs to care about Audio DAMC (via DMAEngine),
Audio DMAC peri peri (via local method) on rsnd driver.
This patch adds new rsnd_dma_ops and care it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 747c71b12e ASoC: rsnd: move rsnd_gen_dma_addr() from gen.c to dma.c
Now, we have dma.c for Audio DMAC / Audio DMAC peri peri.
rsnd_gen_dma_addr() should go there.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto bfe834be95 ASoC: rsnd: add dma.c for Audio DMAC / Audio DMAC peri peri
Renesas sound driver had been assumed that Audio DMAC /
Audio DMAC peri peri are implemented by DMAEngine. But, result of DMA
ML discussion, it was concluded that it is not a general purpose DMAC.
And it should be moved from current DMAEngine to rsnd driver.
So, Audio DMAC peri peri become non DMAEngine.

OTOH, ALSA SoC has soc-generic-dmaengine-pcm implementation. but it
seems difficult to use this generic implementation on rsnd driver at
this point, since it needs to fallback to PIO mode if DMA can't use.
and additionally it needs 2 DMAC (= Audio DMAC / Audio DMAC peri peri).
These are not "generic" feature.

Of course I will try to use this generic dmaengine in the future somehow,
but just use current style at this point until it can formally use 2 DMACs.
This patch adds new dma.c and moves current dma code to dma.c from core.c.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto c5212b4556 ASoC: rsnd: add rsnd_gen_get_phy_addr() to get physical address
physical address is required from Audio DMAC peri peri.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 7277911c87 ASoC: rsnd: enable to get resource by name
rsnd driver needs to support Audio DMAC peri peri inside sound driver.
getting resource by name is useful for it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 4ce3b17bd4 ASoC: rsnd: tidyup rsnd_dma_to_mod() macro declaration position
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 8a2ff4262c ASoC: rsnd: remove un-needed parameter from rsnd_dma_quit()
priv is not used on rsnd_dma_quit()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 9c706ab29f ASoC: rsnd: remove unused rsnd_dma_available()
rsnd_dma_available() is not used. Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto 4715219ece ASoC: rsnd: remove un-needed parameter from rsnd_dma_init()
It can get DMA direction via rsnd_dai_stream.
Remove un-needed is_play from rsnd_dma_init().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Kuninori Morimoto c303cf0895 ASoC: rsnd: remove SH-DMA-BASE specific implementation
Renesas R-Car sound had SH-DMA-BASE specific implementation before,
but, now, it is no longer needed. Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 15:04:29 +00:00
Masanari Iida f42cf8d6a3 treewide: Fix typo in printk messages
This patch fix spelling typo in printk messages.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06 23:04:40 +01:00
Lu, Han 3fe0607a04 ASoC: Intel: remove conflicts when load/unload multiple firmware images
Details:
  1. Unload all modules on fw_list of dsp when suspend, and reload all
modules on fw_list when resume.
  2. A DSP expects only one scratch, but hsw_parse_fw_image() allocates
scratch blocks for each firmware image it parses. Move the allocate function
sst_block_alloc_scratch() out of hsw_parse_fw_image() to make sure a scratch
be allocated only after all firmware images be parsed.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 21:08:12 +00:00
Bard Liao a4ee556137 ASoC: rt286: Change the DMI mapping for Dino
The board ID will be changed between revisions. So, it is better
to map it by project name.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 20:34:45 +00:00
Eric Nelson c7d910b87d ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP
The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached
value instead of writing it directly.

Patch inspired by Russell King's more colorful remarks in this
patch:
	https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6a

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-06 20:19:13 +00:00
Jie Yang 1a5ab21c2e ASoC: Intel: Add suspend_pre and resume_post for Broadwell snd_soc_card
For broadwell machine, we need do some machine related setting before
suspend and after resume, e.g. disable/enable jack detection, here
adding snd_soc_card suspend_pre and resume_post for this task.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 20:17:40 +00:00
Jie Yang 5af76d5c08 ASoC: rt286: correct the OR to AND
Here it should be AND(&) to check the status.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 20:17:10 +00:00
Arnd Bergmann 3d4cf65e2d ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency
The change to enable OMAP5 support on this platform was a little too
eager in adding a 'select' for a particular clock driver that might
not be enabled in all configurations, which in turn leads to a build
error:

warning: (SND_OMAP_SOC_OMAP_ABE_TWL6040) selects COMMON_CLK_PALMAS which has unmet direct dependencies (COMMON_CLK && MFD_PALMAS)
drivers/built-in.o: In function `palmas_clks_probe':
drivers/clk/clk-palmas.c:228: undefined reference to `palmas_ext_control_req_config'

I do not see a strong dependency here, so it's probably better to
drop this select and to avoid adding more complexity here.

Fixes: 5163c1eede ("ASoC: omap: Kconfig: Support for omap5-uevm analog audio")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 19:50:25 +00:00
Fabio Estevam 5371fc0ecd ALSA: ac97: ac97_patch: Simplify patch_vt1613_specific()
We can simplify the code by returning patch_build_controls() directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 17:47:27 +01:00
Maciej S. Szmigiero d6482288aa ALSA: ac97: Add VT1613 AC97 codec support
Patch to add an VT1613 AC97 codec support.

This codec has additional DC offset removal control,
headphone output and no video input.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 17:01:30 +01:00
Takashi Iwai a52afea68f ASoC: Changes for v4.1
A selection of changes for v4.1 so far.  The main things are:
 
  - Move of jack registration to the card where it belongs.
  - Support for DAPM routes specified by both the machine driver and DT.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH
 JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK
 USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z
 QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6
 PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/
 EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU=
 =VlCw
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Changes for v4.1

A selection of changes for v4.1 so far.  The main things are:

 - Move of jack registration to the card where it belongs.
 - Support for DAPM routes specified by both the machine driver and DT.
2015-03-06 14:25:27 +01:00
Takashi Iwai 4fda87df09 ASoC: Fixes for v4.0
A few driver specific fixes here, none of them earth shattering in
 themselves, that have accumliated since the opening of the merge window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU96stAAoJECTWi3JdVIfQLfUH/jBYQqxrPp8qm7Lt9LOuwC4U
 SOi0ERIVhLSKZMo7G4wHmbEapx2FBgH+wxqh9kNLaISvOIH4odFS4Fr1XYE70cY9
 97M46uzLqdaKCDgvkXdx1NLA0zubEGWLOtdVYlrMAzin0FXNH+KYhxkRQbJ6f0LE
 yKmNemnHHtJ4gDl/kMED7bc+mkYSOpwUE/8HLOEA8bcE3luDnj7rvQwOhPIYq0Tz
 Ij4GM8HSfWPp/k3YmZVcF8GA6icN3LG5Jg7DOu6S19fMYimTDaHQDCw0AoLfiIOQ
 DykyHg7ay/I3B6zUz4JikLIW5KjFxZfeQ818YE0GQ4PgePfb0GSIFt0LnNmq4Oo=
 =GIb7
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.0

A few driver specific fixes here, none of them earth shattering in
themselves, that have accumliated since the opening of the merge window.
2015-03-06 14:24:21 +01:00
Hui Wang 70658b9949 ALSA: hda - One more Dell macine needs DELL1_MIC_NO_PRESENCE quirk
Cc: <stable@vger.kernel.org>
BugLink: https://bugs.launchpad.net/bugs/1428947
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 13:04:58 +01:00
Dan Carpenter d124380674 ALSA: opl3: small array underflow
There is a missing lower bound check on "pitchbend" so it means we can
read up to 6 elements before the start of the opl3_note_table[] array.

Thanks to Clemens Ladisch for his help with this patch.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-06 13:04:42 +01:00
Peter Ujfalusi 66e618857c ASoC: davinci-mcasp: Fix compilation error
Introduced by commit:
6afda7f507 ASoC: davinci-mcasp: Allow complete shutdown of McASP when not in use

I'm really sorry for this...

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 10:30:15 +00:00
Kenneth Westfield c5c8635a04 ASoC: qcom: Add LPASS platform driver
Add platform driver for the Qualcomm Technologies
low-power audio subsystem (LPASS) ports.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 17:37:48 +00:00
Kenneth Westfield 80beab8e1d ASoC: qcom: Add LPASS CPU DAI driver
Add the CPU DAI driver for the Qualcomm
Technologies low-power audio subsystem (LPASS).

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 17:37:48 +00:00
Kenneth Westfield cd59f13823 ASoC: qcom: add LPASS header files
Add the LPASS header files for ipq806x SOC.  This
includes the register definitions for the ipq806x
LPAIF, and the structure definition for the driver
data.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 17:13:16 +00:00
kbuild test robot 012baec5c1 ASoC: tegra: fix platform_no_drv_owner.cocci warnings
sound/soc/tegra/tegra_rt5677.c:334:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 17:07:56 +00:00
Charles Keepax fcf638f995 ASoC: wm8804: Fix small issues in probe error paths
This patch fixes some small issues on the probe error paths. Firstly,
fail probe if we can't register the regulator notifiers as this
will cause the cache to never be synchronised which will result in odd
behaviour if the regulators are controllable. Secondly, we don't need to
call regulator_bulk_disable if the enable fails, because the regulator
core will handle this clean up for us. Finally, we need to disable the
regulators if snd_soc_register_codecs fails.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 16:51:58 +00:00
Charles Keepax 0be9653a02 ASoC: wm8804: Use new devres regulator_register_notifier
This is more idiomatic and also fixes an issue where the notifiers were
being leaked if probe failed.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 16:51:58 +00:00
Peter Ujfalusi 6afda7f507 ASoC: davinci-mcasp: Allow complete shutdown of McASP when not in use
Rearrange the pm_runtime_get/put_sync calls so the IP will be turned off
when it is not in use.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 16:41:25 +00:00
Nicolin Chen 6c8ca30eec ASoC: fsl_ssi: Don't try to round-up for PM divisor calculation
According to i.MX6 Series Reference Manual, the formula to calculate
the sys clock is

sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2

Commit aafa85e71a ("ASoC: fsl_ssi: Add DAI master mode support for
SSI on i.MX series") added the divisor calculation which relies on
the clk_round_rate(). However, at that time, clk_round_rate() didn't
provide closest clock rates for some cases because it might not use
a correct rounding policy. So using the original formula (pm + 1) for
PM divisor was not able to give us a desired clock rate. And then we
used (pm + 2) to do the trick.

However, the clk-divider driver has been refined a lot since commit
b11d282dbe ("clk: divider: fix rate calculation for fractional rates")
Now using (pm + 2) trick would result an incorrect clock rate.

So this patch fixes the problem by removing the useless trick.

Reported-by: Stephane Cerveau <scerveau@voxtok.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 12:23:29 +00:00
Takashi Iwai f44f07cf39 ALSA: line6: Clamp values correctly
The usages of clamp() macro in sound/usb/line6/playback.c are just
wrong, the low and high values are swapped.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:03:28 +01:00
Dan Carpenter 096a020a9e ALSA: msnd: add some missing curly braces
There were some curly braces intended here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:02:10 +01:00
Mark Brown d7e3281b52 Merge remote-tracking branch 'asoc/topic/wm8804' into asoc-next 2015-03-05 01:07:27 +00:00
Mark Brown 3a9486367b Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/simple', 'asoc/topic/tegra' and 'asoc/topic/wm-adsp' into asoc-next 2015-03-05 01:07:25 +00:00
Mark Brown 256fca9247 Merge remote-tracking branches 'asoc/topic/jack', 'asoc/topic/max98357a', 'asoc/topic/omap' and 'asoc/topic/rt286' into asoc-next 2015-03-05 01:07:23 +00:00
Mark Brown 4a7e041570 Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/davinci', 'asoc/topic/gpiod' and 'asoc/topic/intel' into asoc-next 2015-03-05 01:07:21 +00:00
Mark Brown 6a93dd249b Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-next 2015-03-05 01:07:20 +00:00
Mark Brown 0af1327ba0 Merge remote-tracking branch 'asoc/topic/dapm-dt' into asoc-next 2015-03-05 01:07:20 +00:00
Charles Keepax 6f2c934809 ASoC: wm8804: Merge CODEC probe and bus probe
All of the things in the CODEC probe, such as getting the regulators and
verifying the chip ID, are better done in bus probe. It is better to
fail during bus probe if this is the wrong chip and all resource
allocation should be done in the bus probe anyway. This patch merges
the CODEC probe into bus probe.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 01:05:54 +00:00
Charles Keepax bbed297d37 ASoC: wm8804: Split out bus drivers
Simplify dependencies by using new style split out bus interfaces.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 01:05:54 +00:00
Maciej S. Szmigiero 90aff15b3e fsl_ssi: fix of_property_read_u32_array return value check
of_property_read_u32_array returns 0 on success,
so the return value shouldn't be inverted twice,
first on assignment then in condition expression.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 01:01:12 +00:00
Lars-Peter Clausen cdd3d2a93f ASoC: sn95031: Fix control-less DAPM routes
Routes without a control must use NULL for the control name. The sn95031
driver uses "NULL" instead in a few places. Previous to commit 5fe5b767dc
("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
the DAPM core silently ignored non-NULL controls on non-mixer and non-mux
routes. But starting with that commit it will complain and not add the
route breaking the sn95031 driver in the process.

This patch replaces the incorrect "NULL" control name with NULL to fix the
issue.

Fixes: 5fe5b767dc ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-05 00:59:43 +00:00
Lars-Peter Clausen 8e6a75c102 ASoC: da732x: Fix control-less DAPM routes
Routes without a control must use NULL for the control name. The da732x
driver uses "NULL" instead in a few places. Previous to commit 5fe5b767dc
("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
the DAPM core silently ignored non-NULL controls on non-mixer and non-mux
routes. But starting with that commit it will complain and not add the
route breaking the da732x driver in the process.

This patch replaces the incorrect "NULL" control name with NULL to fix the
issue.

Fixes: 5fe5b767dc ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-05 00:58:54 +00:00
Lars-Peter Clausen ce9594c6b3 ASoC: ak4671: Fix control-less DAPM routes
Routes without a control must use NULL for the control name. The ak4671
driver uses "NULL" instead in a few places. Previous to commit 5fe5b767dc
("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
the DAPM core silently ignored non-NULL controls on non-mixer and non-mux
routes. But starting with that commit it will complain and not add the
route breaking the ak4671 driver in the process.

This patch replaces the incorrect "NULL" control name with NULL to fix the
issue.

Fixes: 5fe5b767dc ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-05 00:58:11 +00:00
Mark Brown 3b8f4a70b8 Merge remote-tracking branch 'asoc/fix/sta32x' into asoc-linus 2015-03-04 20:42:43 +00:00
Mark Brown 2824ef9b81 Merge remote-tracking branch 'asoc/fix/simple' into asoc-linus 2015-03-04 20:42:43 +00:00
Mark Brown 95d67c7fc2 Merge remote-tracking branch 'asoc/fix/samsung' into asoc-linus 2015-03-04 20:42:43 +00:00