Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The null check on pHba->channel[chan].device is redundant because
device is an array and hence can never be null. Remove the check.
Detected by CoverityScan, CID#115362 ("Array compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of dma_map_single() should be checked by
dma_mapping_error(). However, in function qla26xx_dport_diagnostics(), its
return value is checked against NULL, which could result in failures.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of scsi_host_alloc() should be released by
scsi_host_put(). However, in function mvs_pci_init(), kfree()
is used. This patch replaces kfree() with scsi_host_put() to avoid
possible memory leaks.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In function pm8001_pci_probe(), on errors that the control flow jumps to
label err_out_ha_free, function pm8001_free() is called. In pm8001_free(),
scsi_host_put() is called to release shost, which keeps the return value
of scsi_host_alloc(). After pm8001_free() returns, kfree() is called to
free shost again, resulting in a double free bug. This patch removes
scsi_host_put() from pm8001_free() and explicitly calls scsi_host_put()
to release Scsi_Host in need.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix allocate instance->pd_info twice which was introduced by 96188a89cc.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After sending a message, always clear esp->msg_out_len. Otherwise,
eh_abort_handler may subsequently fail to send an ABORT TASK SET
message.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch improves readability. There are no functional changes.
Since this touches on a questionable ESP_INTR_DC conditional, add some
commentary to help others who may (as I did) find themselves chasing an
"Invalid Command" error after the device flags this condition.
This cleanup also eliminates a warning from "make W=1":
drivers/scsi/esp_scsi.c: In function 'esp_finish_select':
drivers/scsi/esp_scsi.c:1233:5: warning: variable 'orig_select_state' set but not used [-Wunused-but-set-variable]
u8 orig_select_state;
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When in MESSAGE IN phase, the ESP device does not automatically
acknowledge each byte that is transferred by PIO. The mac_esp driver
neglects to explicitly ack them, which causes a timeout during messages
larger than one byte (e.g. tag bytes during reconnect). Fix this with an
ESP_CMD_MOK command after each byte.
The MESSAGE IN phase is also different in that each byte transferred
raises ESP_INTR_FDONE. So don't exit the transfer loop for this interrupt,
for this phase.
That resolves the "Reconnect IRQ2 timeout" error on those Macs which use
PIO transfers instead of PDMA. This patch also improves on the weak tests
for unexpected interrupts and phase changes during PIO transfers.
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 02507a80b3 ("[PATCH] [SCSI] mac_esp: fix PIO mode, take 2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid the following warning from "make C=1":
CHECK drivers/scsi/mac_esp.c
drivers/scsi/mac_esp.c:357:30: warning: incorrect type in initializer (different address spaces)
drivers/scsi/mac_esp.c:357:30: expected unsigned char [usertype] *fifo
drivers/scsi/mac_esp.c:357:30: got void [noderef] <asn:2>*
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add const to bin_attribute structures as they are only passed to the
functions system_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If cxgbi_ep_connect() is called with valid shost then find associated
ndev and use ndev->ifindex to find route.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the lines above this test, 8 'kzalloc' are performed, but only 7
results are tested.
Add the missing one (i.e. '!ioc->port_enable_cmds.reply').
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Regenerate firmware files to make cleaner base for following fix.
This removes some unused definitions and reorders some #defines, but
the code remains the same.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need to override Kbuild rules for copying shipped files, otherwise
aic7xxx_reg.h and aic7xxx_reg_print.c will be ovewritten by old versions.
Fixes: 516b7db593
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ahc_platform_dump_card_state() does nothing. Remove it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Scsi_cmnd is an unsuitable argument for eh_device_reset_handler(),
eh_target_reset_handler(), and eh_host_reset_handler() which do not have
the scope of one single SCSI command. These callbacks tend to use
fc_block_scsi_eh() requiring scsi_cmnd. In order to start decoupling
above eh callbacks from scsi_cmnd, introduce a new variant of the
function called fc_block_rport() taking an fc_rport as argument.
Refactor the old fc_block_scsi_eh() to simply delegate to
fc_block_rport().
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to the driver to set the exchange threshold value for
the number of outstanding AENs.
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality.
Following cleanups have been done as requested by reviewer
- Changed waitQ --> waitq
- Collapsed multiple debug statements into single
- Remove extra parentheses in if-else as per operator precedence
- Remove unnecessary casting
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's better to use the DRIVER_ATTR_RW() and DRIVER_ATTR_RO() macros to
explicitly show that this is a read/write or read/only sysfs file. So
convert the remaining SCSI drivers that use the old style to use the
newer macros.
Bonus is that this removes some checkpatch.pl warnings :)
This is part of a series to drop DRIVER_ATTR() from the tree entirely.
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Willem Riede <osst@riede.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We print a 256 byte event string into a buffer that is only 161
bytes long, this is clearly wrong:
drivers/scsi/gdth_proc.c: In function 'gdth_show_info':
drivers/scsi/gdth.c:3660:41: error: '%s' directive writing up to 255 bytes into a region of size between 141 and 150 [-Werror=format-overflow=]
sprintf(buffer,"Adapter %d: %s\n",
^~
/git/arm-soc/drivers/scsi/gdth.c:3660:13: note: 'sprintf' output between 13 and 277 bytes into a destination of size 161
sprintf(buffer,"Adapter %d: %s\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dvr->eu.async.ionode,dvr->event_string);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc calculates that the worst case buffer size would be 277 bytes,
so we can use that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MSI interrupt name can require 11 bytes in addition to the device name,
for a total of 23 bytes:
drivers/scsi/fnic/fnic_isr.c: In function 'fnic_request_intr':
drivers/scsi/fnic/fnic_isr.c:192:4: error: '-fcs-rq' directive writing 7 bytes into a region of size between 5 and 16 [-Werror=format-overflow=]
"%.11s-fcs-rq", fnic->name);
drivers/scsi/fnic/fnic_isr.c:206:3: note: 'sprintf' output between 12 and 23 bytes into a destination of size 16
sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%.11s-err-notify", fnic->name);
This extends the buffer to fit any possible value.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc notices that we would overflow the buffer for the
inquiry of the product name if we have too many adapters:
drivers/scsi/gdth.c: In function 'gdth_next':
drivers/scsi/gdth.c:2357:29: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(inq.product,"Host Drive #%02d",t);
^~~~~~~~~~~~~~~~~~~
drivers/scsi/gdth.c:2357:9: note: 'sprintf' output between 16 and 17 bytes into a destination of size 16
sprintf(inq.product,"Host Drive #%02d",t);
This won't happen in practice, so just use snprintf to
truncate the string.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We print the driver name into one string and then add and ID
and copy it into a second string of the same length, at which
point gcc complains about a possible overflow:
drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_probe':
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: error: '_cm' directive writing 3 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
printf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
^~~~~~~~~
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: note: directive argument in the range [0, 255]
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:2: note: 'sprintf' output between 5 and 38 bytes into a destination of size 32
sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Making the first string shorter is sufficient to avoid the
warning here, as we know it can only contain either "mpt2sas"
or "mpt3sas".
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc-7 complains that the firmware version strings might overflow
for some values:
drivers/scsi/megaraid.c: In function 'megaraid_probe_one':
drivers/scsi/megaraid.c:314:33: error: '%d' directive writing between 1 and 2 bytes into a region of size between 1 and 2 [-Werror=format-overflow=]
drivers/scsi/megaraid.c:314:33: note: directive argument in the range [0, 15]
drivers/scsi/megaraid.c:314:3: note: 'sprintf' output between 7 and 9 bytes into a destination of size 7
drivers/scsi/megaraid.c:320:35: error: '%d' directive writing between 1 and 2 bytes into a region of size between 1 and 2 [-Werror=format-overflow=]
drivers/scsi/megaraid.c:320:35: note: directive argument in the range [0, 15]
drivers/scsi/megaraid.c:320:3: note: 'sprintf' output between 7 and 9 bytes into a destination of size 7
This makes the code use a truncating snprintf() instead, which shuts
up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API. It also updates
some comments, accordingly.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API. It also updates
the name of some variables and the content of comments, accordingly.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Limit PDMA send to 512 B to avoid data corruption on DTC3181E. The
corruption is always the same: one byte missing at the beginning of a
128 B block. It happens only with slow Quantum LPS 240 drive, not with
faster IBM DORS-32160. It's not clear what causes this. Documentation
for the DTC436 chip has not been made available.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The polling loops in pread() and pwrite() can easily become infinite
loops and hang the machine.
Merge the IRQ check into host buffer wait loop and add polling limit.
Also place a limit on polling for 53C80 registers accessibility.
[Use NCR5380_poll_politely2() for register polling. Rely on polling for
gated IRQ rather than polling for phase error, like the algorithm in the
53c400 datasheet. Move DTC436 workarounds into a separate patch.
Factor-out common code as wait_for_53c80_access(). Rework the residual
calculations. -- F.T.]
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The word "read" may be used to mean "DMA read operation" or "SCSI READ
command", though a READ command implies writing to memory.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an IRQ arrives during PDMA transfer, pread() and pwrite() return
without waiting for the 53C80 registers to be ready and this ends up
messing up the chip state. This was observed with SONY CDU-55S which is
slow enough to disconnect during 4096-byte reads.
IRQ during PDMA is not an error so don't return -1. Instead, store the
remaining byte count for use by NCR5380_dma_residual().
[Poll for the BASR_END_DMA_TRANSFER condition rather than remove the
error message -- F.T.]
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generic_NCR5380_dma_xfer_len() incorrectly uses cmd->transfersize which
causes rescan-scsi-bus and CD-ROM access to hang the system. Use
cmd->SCp.this_residual instead, like other NCR5380 drivers.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When issuing a bus reset we should complete all commands, not
just the command triggering the reset.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To correctly identify which fib has a scsi command callback this
patch implements a flag FIB_CONTEXT_FLAG_SCSI_CMD.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
aac_hba_send() will return FAILED for any non-SCSI command requests,
failing any TMFs. This patch updates the check to allow TMFs.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When sending a reset fib we shouldn't rely on the scsi command,
but rather set the TMF status in the map_info->reset_state variable.
That allows us to send a TMF independent on a scsi command.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split off device, target, and bus reset functionality into
individual functions.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split off the host reset parts of aac_eh_reset() into a separate
host reset function.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split off reset FIB generation into separate functions.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett