The commit d69dece5f5 ("LSM: Add /sys/kernel/security/lsm") extend
security_add_hooks() with a new parameter to register the LSM name,
which may be useful to make the list of currently loaded LSM available
to userspace. However, there is no clean way for an LSM to split its
hook declarations into multiple files, which may reduce the mess with
all the included files (needed for LSM hook argument types) and make the
source code easier to review and maintain.
This change allows an LSM to register multiple times its hook while
keeping a consistent list of LSM names as described in
Documentation/security/LSM.txt . The list reflects the order in which
checks are made. This patch only check for the last registered LSM. If
an LSM register multiple times its hooks, interleaved with other LSM
registrations (which should not happen), its name will still appear in
the same order that the hooks are called, hence multiple times.
To sum up, "capability,selinux,foo,foo" will be replaced with
"capability,selinux,foo", however "capability,foo,selinux,foo" will
remain as is.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The main device is currently not properly released due to one additional
reference to the 'devs' device which is only released in case of a TPM 2.
So, also get the additional reference only in case of a TPM2.
Fixes: fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch converts tpm_tis to use of the new tpm class ops
request_locality, and relinquish_locality.
With the move to using the callbacks, release_locality is changed so
that we now release the locality even if there is no request pending.
This required some changes to the tpm_tis_core_init code path to
make sure locality is requested when needed:
- tpm2_probe code path will end up calling request/release through
callbacks, so request_locality prior to tpm2_probe not needed.
- probe_itpm makes calls to tpm_tis_send_data which no longer calls
request_locality, so add request_locality prior to tpm_tis_send_data
calls. Also drop release_locality call in middleof probe_itpm, and
keep locality until release_locality called at end of probe_itpm.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When TPM2 log has entries with more than 3 digests, or with digests
not listed in the log header, log gets misparsed, eventually
leading to kernel complaint that code tried to vmalloc 512MB of
memory (I have no idea what would happen on bigger system).
So code should not parse only first 3 digests: both event header
and event itself are already in memory, so we can parse any number
of digests, as long as we do not try to parse whole memory when
given count of 0xFFFFFFFF.
So this change:
* Rejects event entry with more digests than log header describes.
Digest types should be unique, and all should be described in
log header, so there cannot be more digests in the event than in
the header.
* Reject event entry with digest that is not described in the
log header. In theory code could hardcode information about
digest IDs already assigned by TCG, but if firmware authors
cannot get event log format right, why should anyone believe
that they got event log content right.
Cc: stable@vger.kernel.org
Fixes: 4d23cc323c ("tpm: add securityfs support for TPM 2.0 firmware event log")
Signed-off-by: Petr Vandrovec <petr@vmware.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove a useless constant that slipped through me when I did the code
review. This commit fixes the issue.
Cc: Jiandi An <anjiandi@codeaurora.org>
Fixes: 69c558de63c7 ("tpm/tpm_crb: Enable TPM CRB interface for ARM64")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Select CONFIG_CRYPTO in addition to CONFIG_HASH to ensure that
also CONFIG_HASH2 is selected. Both are needed for the shash
cipher support required for the KDF operation.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Boot parameters are written before apparmor is ready to answer whether
the user is policy_view_capable(). Setting the parameters at boot results
in an oops and failure to boot. Setting the parameters at boot is
obviously allowed so skip the permission check when apparmor is not
initialized.
While we are at it move the more complicated check to last.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Once the loop on lines 836-853 is complete and exits normally, ent is a
pointer to the dummy list head value. The derefernces accessible from eg
the goto fail on line 860 or the various goto fail_lock's afterwards thus
seem incorrect.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
When building the kernel with clang, the compiler fails to build
security/apparmor/crypto.c with the following error:
security/apparmor/crypto.c:36:8: error: fields must have a constant
size: 'variable length array in structure' extension will never be
supported
char ctx[crypto_shash_descsize(apparmor_tfm)];
^
Since commit a0a77af141 ("crypto: LLVMLinux: Add macro to remove use
of VLAIS in crypto code"), include/crypto/hash.h defines
SHASH_DESC_ON_STACK to work around this issue. Use it in aa_calc_hash()
and aa_calc_profile_hash().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Add the _APPARMOR substring to reference the intended Kconfig option.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
security/apparmor/lib.c:132:9-10: WARNING: return of 0/1 in function 'aa_policy_init' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Since all callers of smk_netlbl_mls() are GFP_KERNEL context
(smk_set_cipso() calls memdup_user_nul(), init_smk_fs() calls
__kernfs_new_node(), smk_import_entry() calls kzalloc(GFP_KERNEL)),
it is safe to use GFP_KERNEL from netlbl_catmap_setbit().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smack_parse_opts_str() calls kfree(opts->mnt_opts) when kcalloc() for
opts->mnt_opts_flags failed. But it should not have called it because
security_free_mnt_opts() will call kfree(opts->mnt_opts).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
fixes: 3bf2789cad ("smack: allow mount opts setting over filesystems with binary mount data")
Cc: Vivek Trivedi <t.vivek@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
SP800-56A defines the use of DH with key derivation function based on a
counter. The input to the KDF is defined as (DH shared secret || other
information). The value for the "other information" is to be provided by
the caller.
The KDF is implemented using the hash support from the kernel crypto API.
The implementation uses the symmetric hash support as the input to the
hash operation is usually very small. The caller is allowed to specify
the hash name that he wants to use to derive the key material allowing
the use of all supported hashes provided with the kernel crypto API.
As the KDF implements the proper truncation of the DH shared secret to
the requested size, this patch fills the caller buffer up to its size.
The patch is tested with a new test added to the keyutils user space
code which uses a CAVS test vector testing the compliance with
SP800-56A.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
To quote Mat Martineau:
"""
Keyrings recently acquired the ability to validate keys before they are
linked using kernel internal APIs. This patch set enables configuration
of restricted keyrings from userspace.
These patches apply to linux-fs/keys-misc and are also available here:
https://git.kernel.org/cgit/linux/kernel/git/martineau/linux.git/log/?h=keyctl-restrict
v13: Detect and avoid cycles in restriction references, and change
restrictions to store a single key pointer rather than arbitrary data.
v12: Rework the KEYCTL_RESTRICT_KEYRING command to take an additional
parameter, renamed some functions based on feedback, and dropped an
unnecessary locking change (patch 1 in previous set).
v11: Configure restrictions using KEYCTL_RESTRICT_KEYRING instead of
using a keyring payload at creation time. Make the garbage collector
aware of restrictions.
v10: Fixups from maintainer feedback. Added some missing documentation.
v9: Rebased on linux-fs/keys-misc (v4.9-rc5)
v8: Add option to look for signing keys within the destination keyring.
Fix a consistency issue with keyring locking and restriction checks.
v7: Rework key restriction payload syntax. Move key-type-specific payload
parsing to the key-type. Attach more restriction information to keyrings
(restriction function, data, and data free) so future restrictions are not
limited to storing a key ID to use for key validation. Validate key before
using it to verify another key. Modify key type locking model to allow key
type lookup during keyring creation.
v6: Return error if only restrict_key is supplied, address misc. review
comments.
v5: Fixed signature bypass problem in patch 3/6
v4: Added userspace restriction options based on builtin keyrings.
restrict_link_by_signature implementation is no longer modified. Split
up v3's patch 2/5 to isolate the change to key.h.
v3: Updated commit message for patch 2/5 (restrict_link_by_signature_indirect)
v2: Payload is now preparsed
"""
Signed-off-by: David Howells <dhowells@redhat.com>
Add a restrict_link_by_key_or_keyring_chain link restriction that
searches for signing keys in the destination keyring in addition to the
signing key or keyring designated when the destination keyring was
created. Userspace enables this behavior by including the "chain" option
in the keyring restriction:
keyctl(KEYCTL_RESTRICT_KEYRING, keyring, "asymmetric",
"key_or_keyring:<signing key>:chain");
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Adds restrict_link_by_signature_keyring(), which uses the restrict_key
member of the provided destination_keyring data structure as the
key or keyring to search for signing keys.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Look up asymmetric keyring restriction information using the key-type
lookup_restrict hook.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Keyrings recently gained restrict_link capabilities that allow
individual keys to be validated prior to linking. This functionality
was only available using internal kernel APIs.
With the KEYCTL_RESTRICT_KEYRING command existing keyrings can be
configured to check the content of keys before they are linked, and
then allow or disallow linkage of that key to the keyring.
To restrict a keyring, call:
keyctl(KEYCTL_RESTRICT_KEYRING, key_serial_t keyring, const char *type,
const char *restriction)
where 'type' is the name of a registered key type and 'restriction' is a
string describing how key linkage is to be restricted. The restriction
option syntax is specific to each key type.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
The keyring restrict callback was sometimes called before
__key_link_begin and sometimes after, which meant that the keyring
semaphores were not always held during the restrict callback.
If the semaphores are consistently acquired before checking link
restrictions, keyring contents cannot be changed after the restrict
check is complete but before the evaluated key is linked to the keyring.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
The restrict_link functions used to validate keys as they are linked
to a keyring can be associated with specific key types. Each key type
may be loaded (or not) at runtime, so lookup of restrict_link
functions needs to be part of the key type implementation to ensure
that the requested keys can be examined.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Replace struct key's restrict_link function pointer with a pointer to
the new struct key_restriction. The structure contains pointers to the
restriction function as well as relevant data for evaluating the
restriction.
The garbage collector checks restrict_link->keytype when key types are
unregistered. Restrictions involving a removed key type are converted
to use restrict_link_reject so that restrictions cannot be removed by
unregistering key types.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
This enables TPM Command Response Buffer interface driver for
ARM64 and implements an ARM specific TPM CRB start method that
invokes a Secure Monitor Call (SMC) to request the TrustZone
Firmware to execute or cancel a TPM 2.0 command.
In ARM, TrustZone security extensions enable a secure software
environment with Secure Monitor mode. A Secure Monitor Call
(SMC) is used to enter the Secure Monitor mode and perform a
Secure Monitor service to communicate with TrustZone firmware
which has control over the TPM hardware.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TCG ACPI Specification Family "1.2" and "2.0" Version 1.2
Revision 8 introduces new start method for ARM SMC.
- Add new start method (type 11) for ARM SMC
- Add start method specific parameters offset for ARM SMC start method
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This commit adds support for requesting and relinquishing locality 0 in
tpm_crb for the course of command transmission.
In order to achieve this, two new callbacks are added to struct
tpm_class_ops:
- request_locality
- relinquish_locality
With CRB interface you first set either requestAccess or relinquish bit
from TPM_LOC_CTRL_x register and then wait for locAssigned and
tpmRegValidSts bits to be set in the TPM_LOC_STATE_x register.
The reason why were are doing this is to make sure that the driver
will work properly with Intel TXT that uses locality 2. There's no
explicit guarantee that it would relinquish this locality. In more
general sense this commit enables tpm_crb to be a well behaving
citizen in a multi locality environment.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Since check_locality is checking to see if a certain
locality is active, return true if active otherwise
return false.
Cc: Christophe Ricard <christophe.ricard@gmail.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When PM_SLEEP is disabled crb_pm_suspend and crb_pm_resume are not used by
SET_SYSTEM_SLEEP_PM_OPS even if PM is enabled:
drvers/char/tpm/tpm_crb.c:540:12: warning: ‘crb_pm_suspend’ defined but not
used [-Wunused-function]
static int crb_pm_suspend(struct device *dev)
^
drivers/char/tpm/tpm_crb.c:551:12: warning: ‘crb_pm_resume’ defined but not
used [-Wunused-function]
static int crb_pm_resume(struct device *dev)
^
The preprocessor condition should be on CONFIG_PM_SLEEP, not on CONFIG_PM.
However, this patch fixes this warning by using __maybe_unused on function
that are in the preprocessor condition.
Fixes: 848efcfb560c ("tpm/tpm_crb: enter the low power state upon device suspend")
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently, there is an unnecessary 1 msec delay added in
i2c_nuvoton_write_status() for the successful case. This
function is called multiple times during send() and recv(),
which implies adding multiple extra delays for every TPM
operation.
This patch calls usleep_range() only if retry is to be done.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org (linux-4.8)
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The current code passes the address of tpm_chip as the argument to
dev_get_drvdata() without prior NULL check in
tpm_ibmvtpm_get_desired_dma. This resulted an oops during kernel
boot when vTPM is enabled in Power partition configured in active
memory sharing mode.
The vio_driver's get_desired_dma() is called before the probe(), which
for vtpm is tpm_ibmvtpm_probe, and it's this latter function that
initializes the driver and set data. Attempting to get data before
the probe() caused the problem.
This patch adds a NULL check to the tpm_ibmvtpm_get_desired_dma.
fixes: 9e0d39d8a6 ("tpm: Remove useless priv field in struct tpm_vendor_specific")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkine <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Make sure size of response buffer is at least 6 bytes, or
we will underflow and pass large size_t to memcpy_fromio().
This was encountered while testing earlier version of
locality patchset.
Cc: stable@vger.kernel.org
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Sessions are different from transient objects in that their handles
may not be virtualized (because they're used for some hmac
calculations). Additionally when a session is context saved, a
vestigial memory remains in the TPM and if it is also flushed, that
will be lost and the session context will refuse to load next time, so
the code is updated to flush only transient objects after a context
save. Add a separate array (chip->session_tbl) to save and restore
sessions by handle. Use the failure of a context save or load to
signal that the session has been flushed from the TPM and we can
remove its memory from chip->session_tbl.
Sessions are also isolated during each instance of a tpm space. This
means that spaces shouldn't be able to see each other's sessions and
is enforced by ensuring that a space user may only refer to sessions
handles that are present in their own chip->session_tbl. Finally when
a space is closed, all the sessions belonging to it should be flushed
so the handles may be re-used by other spaces.
Note that if we get a session save or load error, all sessions are
effectively flushed. Even though we restore the session buffer, all
the old sessions will refuse to load after the flush and they'll be
purged from our session memory. This means that while transient
context handling is still soft in the face of errors, session handling
is hard (any failure of the model means all sessions are lost).
Fixes-from: Colin Ian King <colin.king@canonical.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently the tpm spaces are not exposed to userspace. Make this
exposure via a separate device, which can now be opened multiple times
because each read/write transaction goes separately via the space.
Concurrency is protected by the chip->tpm_mutex for each read/write
transaction separately. The TPM is cleared of all transient objects
by the time the mutex is dropped, so there should be no interference
between the kernel and userspace.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Added an ability to virtualize TPM commands into an isolated context
that we call a TPM space because the word context is already heavily
used in the TPM specification. Both the handle areas and bodies (where
necessary) are virtualized.
The mechanism works by adding a new parameter struct tpm_space to the
tpm_transmit() function. This new structure contains the list of virtual
handles and a buffer of page size (currently) for backing storage.
When tpm_transmit() is called with a struct tpm_space instance it will
execute the following sequence:
1. Take locks.
2. Load transient objects from the backing storage by using ContextLoad
and map virtual handles to physical handles.
3. Perform the transaction.
4. Save transient objects to backing storage by using ContextSave and
map resulting physical handle to virtual handle if there is such.
This commit does not implement virtualization support for hmac and
policy sessions.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Check for every TPM 2.0 command that the command code is supported and
the command buffer has at least the length that can contain the header
and the handle area.
For ContextSave and FlushContext we mark the body to be part of the
handle area. This gives validation for these commands at zero
cost, including the body of the command.
The more important reason for this is that we can virtualize these
commands in the same way as you would virtualize the handle area of a
command.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Check that the length matches the length reported by the response
header already in tpm_transmit() to improve validation.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Encapsulated crb_wait_for_reg32() so that state changes in other CRB
registers than TPM_CRB_CTRL_REQ_x can be waited.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Gang Wei <gang.wei@intel.com>
In order to provide access to locality registers, this commits adds
mapping of the head of the CRB registers, which are located right
before the control area.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Gang Wei <gang.wei@intel.com>
Testing the implementation with a Raspberry Pi 2 showed that under some
circumstances its SPI master erroneously releases the CS line before the
transfer is complete, i.e. before the end of the last clock. In this case
the TPM ignores the transfer and misses for example the GO command. The
driver is unable to detect this communication problem and will wait for a
command response that is never going to arrive, timing out eventually.
As a workaround, the small delay ensures that the CS line is held long
enough, even with a faulty SPI master. Other SPI masters are not affected,
except for a negligible performance penalty.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper
layers, as tpm_tis has no such limitation. Add a loop to hide that
limitation.
v2: Moved scope of spi_message to the top as requested by Jarkko
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Wait states are signaled in the last byte received from the TPM in
response to the header, not the first byte. Check rx_buf[3] instead of
rx_buf[0].
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Abort the transfer with ETIMEDOUT when the TPM signals more than
TPM_RETRY wait states. Continuing with the transfer in this state
will only lead to arbitrary failures in other parts of the code.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The algorithm for sending data to the TPM is mostly identical to the
algorithm for receiving data from the TPM, so a single function is
sufficient to handle both cases.
This is a prequisite for all the other fixes, so we don't have to fix
everything twice (send/receive)
v2: u16 instead of u8 for the length.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Mickaël Salaün