When converting inline dentry, we will zero out target dentry page before
duplicating data of inline dentry into target page, it become overhead
since inline dentry size is not small.
So this patch tries to remove unneeded initializing in the space of target
dentry page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
According to commit 5f16f3225b ("ext4: atomically set inode->i_flags in
ext4_set_inode_flags()").
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__GFP_NOFAIL can avoid retrying the whole path of kmem_cache_alloc and
bio_alloc.
And, it also fixes the use cases of GFP_ATOMIC correctly.
Suggested-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In __lookup_extent_tree_ret we will not try to find neighbor nodes if
we find the target node, in this condition, we will lost the chance to
merge the new mapping with exist extent node later.
So our extent cache of inode will be fragmented after overwrite exist
file, we can see the number of extent node increases intensively in
following test case:
dd if=/dev/zero of=/mnt/f2fs/4m bs=4K count=1024
Extent Cache:
- Hit Count: L1-1:0 L1-2:0 L2:0
- Hit Ratio: 0% (0 / 3072)
- Inner Struct Count: tree: 1, node: 1
dd if=/dev/zero of=/mnt/f2fs/4m bs=4K count=1024 conv=notrunc
Extent Cache:
- Hit Count: L1-1:2048 L1-2:0 L2:0
- Hit Ratio: 33% (2048 / 6144)
- Inner Struct Count: tree: 1, node: 961
This patch fixes to lookup neighbors of target node for further
merging.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits __insert_extent_tree_ret into __try_merge_extent_node &
__insert_extent_tree for code readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 0f825ee6e8 ("f2fs: add new interfaces for extent tree"),
f2fs_init_extent_tree becomes the only caller of __insert_extent_tree, and
in f2fs_init_extent_tree, we will only insert extent node in an empty tree,
so __try_{back,front}_merge in __insert_extent_tree will never be called.
This patch removes these dead codes, besides, rename __insert_extent_tree
to __init_extent_tree for readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch alters to replace total hit stat with rbtree hit stat,
and then adjust showing of extent cache stat:
Hit Count:
L1-1: for largest node hit count;
L1-2: for last cached node hit count;
L2: for extent node hit after lookuping in rbtree.
Hit Ratio:
ratio (hit count / total lookup count)
Inner Struct Count:
tree count, node count.
Before:
Extent Hit Ratio: 0 / 2
Extent Tree Count: 3
Extent Node Count: 2
Patched:
Exten Cacache:
- Hit Count: L1-1:4871 L1-2:2074 L2:208
- Hit Ratio: 1% (7153 / 550751)
- Inner Struct Count: tree: 26560, node: 11824
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to stat the hit count of largest/cached node for showing
in debugfs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The test step is like below:
1. touch file
2. truncate -s $((1024*1024)) file
3. fallocate -o 0 -l $((1024*1024)) file
4. fibmap.f2fs file
Our result of fibmap.f2fs showed below is not correct:
file_pos start_blk end_blk blks
0 -937166132 -937166132 1
4096 -937166132 -937166132 1
8192 -937166132 -937166132 1
12288 -937166132 -937166132 1
16384 -937166132 -937166132 1
20480 -937166132 -937166132 1
...
1040384 -937166132 -937166132 1
1044480 -937166132 -937166132 1
This is because f2fs_map_blocks will return with no error when meeting
a hole or preallocated block, the caller __get_data_block will map the
uninitialized variable value to bh->b_blocknr.
Unfortunately generic_block_bmap will neither check the return value of
get_data() nor check mapping info of buffer_head, result in returning
the random block address.
After fixing the issue, our result shows correctly:
file_pos start_blk end_blk blks
0 0 0 256
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add annotation to let us know more clearly about space utilization
information of regular dentry and inline dentry.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_lookup_extent_tree, et->cached_en was read and updated with only
read lock held,
it could cause __lookup_extent_tree within return entirely wrong
extent_node, if other
thread update et->cached_en just before __lookup_extent_tree return.
However, there are two things about this patch that need to be noticed:
1. It does no good to arrange the order of concurrent read/write, the result
would still
be random in such case.
2. It's built on this assumption: the mix up of reads and writes on a single
pointer would
not make the pointer partially wrong at any time. Please let me know if I'm
wrong, thx.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a routine which checks the block address of newly allocated nid.
If an nid has already allocated by other thread due to subtle data races, it
will result in filesystem corruption.
So, it needs to check whether its block address was already allocated or not
in prior to nid allocation as the last chance.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should not call unlock_new_inode when insert_inode_locked failed.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If FG_GC failed to reclaim one section, let's retry with another section
from the start, since we can get anoterh good candidate.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, update_inode_page is not called under f2fs_lock_op.
Instead we should call with f2fs_write_inode.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we can reuse nids as many as possible, we can mitigate producing obsolete
node pages in the page cache.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If node blocks were already moved, we don't need to move them again.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As the below comment of bio_alloc_bioset, f2fs can allocate multiple bios at the
same time. So, we can't guarantee that bio is allocated all the time.
"
* When @bs is not NULL, if %__GFP_WAIT is set then bio_alloc will always be
* able to allocate a bio. This is due to the mempool guarantees. To make this
* work, callers must never allocate more than 1 bio at a time from this pool.
* Callers that need to allocate more than 1 bio must always submit the
* previously allocated bio for IO before attempting to allocate a new one.
* Failure to do so can cause deadlocks under memory pressure.
"
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch increases the number of maximum hard links for one file.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should avoid needless checkpoints when there is no dirty and prefree segment.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces __count_free_nids/try_to_free_nids and registers
them in slab shrinker for shrinking under memory pressure.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_delete_entry, if last dirent is remove from the dentry page,
we will try to punch that page since it has no valid date in it.
But truncate_hole which is used for punching could fail because of
no memory or IO error, if that happened, we'd better skip clearing
this valid dentry page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
I volunteer to be a dedicated reviewer of f2fs, add my email address in
maintainship entry of f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should not write node pages when deleting orphan inodes.
In order to do that, we can eaisly set POR_DOING flag earlier before entering
orphan inode routine.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In recover_orphan_inode, whenever f2fs_iget fail, we will make kernel panic,
but it's not reasonable, because f2fs_iget can fail due to a lot of reasons
including out of memory.
So we change error handling method as below:
a) when finding no entry for the orphan inode, bug_on for catching bugs;
b) for other reasons, report it to caller.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there is not enough free segment, we should not assign a new segment
explicitly. Otherwise, we can run out of free segment.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we use radix tree to index all registered page entries for
atomic file, but now we only use radix tree to see whether current page
is indexed or not, since the other user of radix tree is gone in commit
042b7816aa ("f2fs: remove unnecessary call to invalidate inmemory pages").
So in this patch, we try to use one more efficient way:
Introducing a macro ATOMIC_WRITTEN_PAGE, and setting it as page private
value to indicate page indexing status. By using this way, we can save
memory and lookup time.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We run ltp testcase with f2fs and obtain a TFAIL in diotest4, the result in
detail is as fallow:
dio04
<<<test_start>>>
tag=dio04 stime=1432278894
cmdline="diotest4"
contacts=""
analysis=exit
<<<test_output>>>
diotest4 1 TPASS : Negative Offset
diotest4 2 TPASS : removed
diotest4 3 TFAIL : diotest4.c:129: write allows odd count.returns 1: Success
diotest4 4 TFAIL : diotest4.c:183: Odd count of read and write
diotest4 5 TPASS : Read beyond the file size
......
the result of ext4 with same environment:
dio04
<<<test_start>>>
tag=dio04 stime=1432259643
cmdline="diotest4"
contacts=""
analysis=exit
<<<test_output>>>
diotest4 1 TPASS : Negative Offset
diotest4 2 TPASS : removed
diotest4 3 TPASS : Odd count of read and write
diotest4 4 TPASS : Read beyond the file size
......
The reason is that when triggering DIO in f2fs, we will return zero value
in ->direct_IO if writer's buffer offset, file offset and transfer size is
not alignment to block size of filesystem, resulting in falling back into
buffered write instead of returning -EINVAL.
This patch fixes that problem by returning correct error number for above
case, and removing the judgement condition in check_direct_IO to make sure
the verification will be enabled for direct reader too.
Besides, Jaegeuk Kim pointed out that there is expectional cases we should
always make direct-io falling back into buffered write, such as dio in
encrypted file.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
[Chao Yu make small change and add detail description in commit message]
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
fill_zero can fail due to a lot of reason, but previously we do not handle
its return value, so its callers such as punch_hole/f2fs_zero_range may
report success, but actually can fail because of error occurs inside
fill_zero.
This patch fixes to report correct return value of fill_zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When testing with generic/101 in xfstests, error message outputed as below:
--- tests/generic/101.out
+++ results//generic/101.out.bad
@@ -10,10 +10,14 @@
File foo content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
-0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0372000
...
(Run 'diff -u tests/generic/101.out results/generic/101.out.bad' to see the entire diff)
The test flow is like below:
1. pwrite foo -S 0xaa 0 64K
2. pwrite foo -S 0xbb 64K 61K
3. sync
4. truncate foo 64K
5. truncate foo 125K
6. fsync foo
7. flakey drop writes
8. umount
After this test, we expect the data of recovered file will have the first
64k of data filling with value 0xaa and the next 61k of data filling with
value 0x00 because we have fsynced it before dropping writes in dm.
In f2fs, during recovering, we will only recover the valid block address
in direct node page if it is marked as a fsynced dnode, but block address
which means invalid/reserved (with value NULL_ADDR/NEW_ADDR) will not be
recovered. So, the file recovered shows its incorrect data 0xbb in range of
[61k, 125k].
In this patch, we fix to recover invalid/reserved block during recover flow.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In some cases, we only need the block address when we call
f2fs_reserve_block,
other fields of struct dnode_of_data aren't necessary.
We can try extent cache first for such cases in order to speed up the
process.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To avoid meeting garbage data in next free node block at the end of warm
node chain when doing recovery, we will try to zero out that invalid block.
If the device is not support discard, our way for zeroing out block is:
grabbing a temporary zeroed page in meta inode, then, issue write request
with this page.
But, we forget to release that temporary page, so our memory usage will
increase without gaining any hit ratio benefit, so it's better to free it
for saving memory.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In following call path, we will pass a locked and referenced ipage
pointer to get_new_data_page:
- init_inode_metadata
- make_empty_dir
- get_new_data_page
There are two exit paths in get_new_data_page when error occurs:
1) grab_cache_page fails, ipage will not be released;
2) f2fs_reserve_block fails, ipage will be released in callee.
So, it's not consistent for error handling in get_new_data_page.
For f2fs_reserve_block, it's not very easy to change the rule
of error handling, since it's already complicated.
Here we deside to choose an easy way to fix this issue:
If any error occur in get_new_data_page, we will ensure releasing
ipage in this function.
The same issue is in f2fs_convert_inline_dir, fix that too.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Replace BUG_ON with f2fs_bug_on to deal with
block and segment validity check failed.
Signed-off-by: Xue Liu <liuxueliu.liu@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In get_meta_page, we guarantee no failure for the returned page,
but sometimes, IO error from device will incur returning an
non-updated page.
Then, we still use this page as updated one, exception could happen
when using this kind of page.
So in this condition, we'd better freeze fs by making fs readonly and
and stop doing checkpoint.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
some backing devices need pages to be stable during writeback. It doesn't
matter if
the page is completely overwritten or already uptodate, it needs to wait
before write.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to handle error cases in commit_inmem_pages.
If an error occurs, it stops to write the pages and return the error right
away.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When there is no enough free nids in free nid cache, we will try to
readahead FREE_NID_PAGES:4 nat pages into page cache of meta_inode,
then, reading nat entries in nat page for adding free nids to free nid
cache.
But when traversing all nat pages we readaheaded in a circulation,
our exit condition is not set right, one more nat page will be scanned
without readaheading, resulting worse read performance.
This patch fixes to read the correct number nat pages to avoid bad
performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we clear inline data/dentry flag in handle_failed_inode, we will fail
to decline the stat count of inline data/dentry in f2fs_evict_inode due
to no flag in inode. So remove the wrong clearing.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_ioc_start_{atomic,volatile}_write, if we failed in converting
inline data, we will report error to user, but still remain atomic/volatile
flag in inode, it will impact further writes for this file. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the incorrect range (0, LONG_MAX) which is used
in ranged fsync. If we use LONG_MAX as the parameter for indicating
the end of file we want to synchronize, in 32-bits architecture
machine, these datas after 4GB offset may not be persisted in
storage after ->fsync returned.
Here, we alter LONG_MAX to LLONG_MAX to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When flushing comes from background, if there is no dirty page in the
mapping of inode, we'd better to skip seeking dirty page from mapping
for writebacking.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The if statement "goto continue_unlock" is exactly the same when
each if condition is true that is depended on the value of both
"step" and "is_cold_data(page)" are 0 or 1. That means when the
value of "step" equals to "is_cold_data(page)", the if condition
is true and the if statement "goto continue_unlock" appears only
once, so it can be optimized to reduce the duplicated code.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In handle_failed_inode, there is a potential deadlock which can happen
in below call path:
- f2fs_create
- f2fs_lock_op down_read(cp_rwsem)
- f2fs_add_link
- __f2fs_add_link
- init_inode_metadata
- f2fs_init_security failed
- truncate_blocks failed
- handle_failed_inode
- f2fs_truncate
- truncate_blocks(..,true)
- write_checkpoint
- block_operations
- f2fs_lock_all down_write(cp_rwsem)
- f2fs_lock_op down_read(cp_rwsem)
So in this path, we pass parameter to f2fs_truncate to make sure
cp_rwsem in truncate_blocks will not be locked again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_do_collapse, region cp_rwsem covered is large, since it will be
held until all blocks are left shifted, so if we try to collapse small
area at the beginning of large file, checkpoint who want to grab writer's
lock of cp_rwsem will be delayed for long time.
In order to avoid this condition, altering to lock/unlock cp_rwsem each
shift operation.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a lookup and a insertion interface for extent tree.
The new lookup return the insert position and the prev/next
extents closest to the offset we lookup when find no match.
The new insertion uses above parameters to improve performance.
There are three possible insertions after the lookup in
f2fs_update_extent_tree, two of them insert parts of removed extent
back to tree, since no merge happens during this process, new insertion
skips the merge check in this scanario; the another insertion inserts a
new extent to tree, new insertion uses prev/next extent and insert
position to insert this extent directly, and save the time of searching
down the tree.
As long as tree remains unchanged between lookup and insertion, this
would work fine. And the new lookup would be useful when add
multi-blocks extent support for insertion interface.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes for a caller to handle the page after its bio gets an error.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu