Interrupt enable is contained in vce init table and this register could
not be accessed in secure ASICs, so just remove it.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add uvd and vce re-init after gpu reset.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMSCH FW need to get the wptr from 0 after it get the mailbox request
from driver, since every time kick the mailbox, mmsch thinks that it
is the first time engine start to initialize.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That function will be used later to support setting a page table
block with 64 bit value.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm control for vcn has been moved to firmware, kernel always spins
"amdgpu: [powerplay] pp_dpm_powergate_uvd was not implemented", each
time when application runs, disable it for now till pg/cg. Also remove
clock manual setting when dpm disabled, which was inherited from uvd.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 also support virtual display, remove the error message.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The header file only contains four macros, two of which are never used.
Move the other two to dss.h and remove dss_features.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The supported outputs feature is specific to the DSS, move it from the
omap_dss_features structure to the dss driver.
The omap_dss_features structure is now empty and can be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSS_FCK feature is specific to the DSS, move it from the
omap_dss_features structure to the dss driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSS_PCD, FEAT_PARAM_LINEWIDTH and FEAT_PARAM_DOWNSCALE
features are specific to the DISPC, move them from the omap_dss_features
structure to the dispc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSI* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
All the remaining FEAT_* features are specific to the DISPC, move them
from the omap_dss_features structure to the dispc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_LCD_CLK_SRC feature is specific to the DSS, move it from the
omap_dss_features structure to the dss_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_DPI_USES_VDDS_DSI feature is specific to the DPI, move it from
the omap_dss_features structure to the dpi code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_HDMI_* features are specific to the HDMI4, move them from the
omap_dss_features structure to the hdmi4 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_DSI_* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_VENC_REQUIRES_TV_DAC_CLK is specific to the VENC, move it from
the omap_dss_features structure to the venc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The reg_fields feature describes DISPC registers only. Move it from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The register belongs to the DSS, move the feature to the dss_features
structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The num_ovls and num_mgrs are dispc features. Move them from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The overlay_caps is a dispc feature. Move it from the omap_dss_features
structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The supported_color_modes is a dispc feature. Move it from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The buffer_size_unit and burst_size_unit are dispc features. Move them
from the omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In preparation for removal of the core module, move the shutdown()
handler from core to dss.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
debugfs code is spread between the core and dss drivers. In preparation
for removal of the core driver, move it all to the dss driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSS internal features are derived from the platform device
compatible string which is available at probe time. Don't delay
initialization until bind time. This prepares for the merge of the two
DSS features structures that will be needed before the DSS is bound.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dss driver uses the supported display types to check whether the DSS
has SDI, VENC or HDMI outputs. We can instead use the supported outputs
the provide the same information. This removes the last use of the
supported display types, that we can then remove as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the compatible string instead of the OMAP SoC revision to determine
device features. The various OMAP3-based SoCs can't be told apart using
the compatible string, use soc_device_match() to tell them apart.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DPI code only needs to differentiate between major OMAP revisions,
which can be obtained from the DSS compatible string. Replace the OMAP
SoC model checks to prepare for removal of the OMAP SoC version platform
data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the compatible string instead of the OMAP SoC revision to determine
device features. On OMAP34xx the features depend on the ES revision that
can not be determined from the compatible string. Use soc_device_match()
in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP implementation of the set_min_bus_tput() API is a no-op.
There's no point in forwarding the driver calls to the platform code.
Remove the use of the related platform data callback, but keep the
internal function as a reminder that the feature will need to be
implemented when the OMAP platform will provide support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Don't rely on callback functions provided by the platform, but access
the syscon internally to mux the DSI pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI PLL hardware data and DSS channels are selected based on the
OMAP SoC model. There's no need for fine-grained model information, as
the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5.
As this can be done through the DSI compatible string, store the
corresponding information in OF match data instead to avoid accessing
the OMAP SoC model.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Move the two function pointers to a new dss_ops structure. This will
allow merging the dss_features and omap_dss_features structures without
having to expose the DPI source selection and LCD clock muxing functions
in header files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
PHY features are stored in a global variable, while they should be
properties of the PHY object. As existing OMAP platforms have a single
HDMI PHY this doesn't cause any issue, but doesn't follow the driver
model.
Move the PHY features to the HDMI PHY data structure to follow the
driver model and pave the road for multiple HDMI PHYs support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The two variables are never used outside of their compilation unit, make
them static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dpi_display_enable() function ensures that a VDDS_DSI regulator is
available if the DSI uses the VDDS_DSI supply. This is not needed, as a
failure to get the VDDS_DSI supply will result in a probe failure,
dpi_display_enable() will thus never be called in that case.
Remove the check, and replace tests for the FEAT_DPI_USES_VDDS_DSI
feature with a test for the regulator object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
SoC device attributes are registered with a call to
soc_device_register() from the machine .init_late() operation, which is
called from the late initcall, after all drivers built-in drivers have
been probed. This results in the impossibility for drivers to use SoC
device matching in their probe function.
The omap_soc_device_init() function is safe to call from the machine
.init() operation, as all data it depends on is initialized from the
.init_early() operation. Move SoC device attribute registration to
machine .init() like on all other ARM platforms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4669 464 0 5133 140d panel-dsi-cm.o
File size After adding 'const':
text data bss dec hex filename
4725 400 0 5125 1405 panel-dsi-cm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5147 560 0 5707 164b panel-sony-acx565akm.o
File size After adding 'const':
text data bss dec hex filename
5211 496 0 5707 164b panel-sony-acx565akm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2673 368 0 3041 be1 panel-tpo-td043mtea1.o
File size After adding 'const':
text data bss dec hex filename
2721 304 0 3025 bd1 panel-tpo-td043mtea1.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
1240 112 0 1352 548 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.o
File size After adding 'const':
text data bss dec hex filename
1352 0 0 1352 548 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The videomode structures are only copied into the vm field of a
panel_drv_data structure, so they can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use interrupt handler for hpd GPIO to react to HPD changes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the hpd_gpio is valid, use interrupt handler to react to HPD changes.
In case the hpd_gpio is not valid, try to enable hpd detection on the
encoder if it supports it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HPD signal can be used for detecting HDMI cable plug and unplug event
without the need for polling the status of the line.
This will speed up detecting such event because we do not need to wait for
the next poll event to notice the state change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_framebuffer_create() fails to unref all the gem objects if creating
the FB fails, leading to a memory leak.
Fix the loop so that it goes through all the reffed gem objects.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Frank Min