Commit Graph

144748 Commits

Author SHA1 Message Date
Ryusuke Konishi 843382370e nilfs2: ensure to clear dirty state when deleting metadata file block
This would fix the following failure during GC:

 nilfs_cpfile_delete_checkpoints: cannot delete block
 NILFS: GC failed during preparation: cannot delete checkpoints: err=-2

The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.

This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.

Reported-by: David Arendt <admin@prnet.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-10 17:04:42 +09:00
Ryusuke Konishi 201913ed74 nilfs2: fix circular locking dependency of writer mutex
This fixes the following circular locking dependency problem:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3 #5
 -------------------------------------------------------
 segctord/3895 is trying to acquire lock:
  (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
   nilfs_mdt_get_block+0x89/0x20f [nilfs2]

 but task is already holding lock:
  (&bmap->b_sem){++++..}, at: [<d0d02d99>]
   nilfs_bmap_propagate+0x14/0x2e [nilfs2]

 which lock already depends on the new lock.

The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-09 13:36:57 +09:00
Ryusuke Konishi 85c2a74fab nilfs2: fix possible recovery failure due to block creation without writer
Some function calls in nilfs_prepare_segment_for_recovery() may fail
because they can create blocks on meta data files without configuring
a writable FS-instance.  Concretely, nilfs_mdt_create_block() routine
of meta data files will fail in that case.

This fixes the problem by temporarily attaching a writable FS-instace
during the function is called.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-09 13:36:56 +09:00
Linus Torvalds 091bf7624d Linux 2.6.30-rc5 2009-05-08 17:14:14 -07:00
Linus Torvalds 621c2559c1 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd: fix timeout in M25P80 driver
  mtd: Bug in m25p80.c during whole-chip erase
  mtd: expose subpage size via sysfs
  mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR
2009-05-08 17:00:41 -07:00
Linus Torvalds d9d05fda91 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: MCE: make cmci_discover_lock irq-safe
  x86: xen, i386: reserve Xen pagetables
  x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
  x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
  x86: fix boot hang in early_reserve_e820()
  x86: Fix a typo in a printk message
  x86, srat: do not register nodes beyond e820 map
2009-05-08 16:59:23 -07:00
Linus Torvalds 825118d1f1 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (w83781d) Fix W83782D support (NULL pointer dereference)
  hwmon: (asus_atk0110) Fix compiler warning
2009-05-08 16:25:00 -07:00
Linus Torvalds b20a4e9483 Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix return value for sys_ipc
  microblaze: Storage class should be before const qualifier
2009-05-08 16:24:25 -07:00
Masami Hiramatsu 201517a7f3 kprobes: fix to use text_mutex around arm/disarm kprobe
Fix kprobes to lock text_mutex around some arch_arm/disarm_kprobe() which
are newly added by commit de5bd88d5a.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-08 16:23:48 -07:00
Jean Delvare 848ddf116b hwmon: (w83781d) Fix W83782D support (NULL pointer dereference)
Commit 360782dde0 (hwmon: (w83781d) Stop
abusing struct i2c_client for ISA devices) broke W83782D support for
devices connected on the ISA bus. You will hit a NULL pointer
dereference as soon as you read any device attribute. Other devices,
and W83782D devices on the SMBus, aren't affected.

Reported-by: Michel Abraham
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michel Abraham
2009-05-08 20:27:28 +02:00
Luca Tettamanti b9008708f2 hwmon: (asus_atk0110) Fix compiler warning
atk_sensor_type is only used when DEBUG is defined.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-08 20:27:28 +02:00
Peter Horton cd1a6de7d4 mtd: fix timeout in M25P80 driver
Extend erase timeout in M25P80 SPI Flash driver.

The M25P80 drivers fails erasing sectors on a M25P128 because the ready
wait timeout is too short. Change the timeout from a simple loop count to a
suitable number of seconds.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-08 13:51:53 +01:00
Hidetoshi Seto e5299926d7 x86: MCE: make cmci_discover_lock irq-safe
Lockdep reports the warning below when Li tries to offline one cpu:

[  110.835487] =================================
[  110.835616] [ INFO: inconsistent lock state ]
[  110.835688] 2.6.30-rc4-00336-g8c9ed89 #52
[  110.835757] ---------------------------------
[  110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[  110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  110.835982]  (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b

cmci_clear() can be called via smp_call_function_single().

It is better to disable interrupt while holding cmci_discover_lock,
to turn it into an irq-safe lock - we can deadlock otherwise.

[ Impact: fix possible deadlock in the MCE code ]

Reported-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Shaohua Li<shaohua.li@intel.com>
2009-05-08 11:03:26 +02:00
Jeremy Fitzhardinge 33df4db04a x86: xen, i386: reserve Xen pagetables
The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.

[ Impact: fix Xen guest crash ]

Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08 10:49:11 +02:00
Huang Ying 6407df5ca5 x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
Tim Starling reported that crashdump will panic with kernel compiled
with CONFIG_KEXEC_JUMP due to null pointer deference in
machine_kexec_32.c: machine_kexec(), when deferencing
kexec_image. Refering to:

http://bugzilla.kernel.org/show_bug.cgi?id=13265

This patch fixes the BUG via replacing global variable reference:
kexec_image in machine_kexec() with local variable reference: image,
which is more appropriate, and will not be null.

Same BUG is in machine_kexec_64.c too, so fixed too in the same way.

[ Impact: fix crash on kexec ]

Reported-by: Tim Starling <tstarling@wikimedia.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 22:01:05 -07:00
Jan Beulich 4983439676 x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
With the introduction of the .brk section, special care must be taken
that no unused page table entries remain if _brk_end and _end are
separated by a 2M page boundary. cleanup_highmap() runs very early and
hence cannot take care of that, hence potential entries needing to be
removed past _brk_end must be cleared once the brk allocator has done
its job.

[ Impact: avoids undesirable TLB aliases ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 21:51:34 -07:00
Jan Beulich 6143876651 x86: fix boot hang in early_reserve_e820()
If the first non-reserved (sub-)range doesn't fit the size requested,
an endless loop will be entered. If a range returned from
find_e820_area_size() turns out insufficient in size, the range must
be skipped before calling the function again.

[ Impact: fixes boot hang on some platforms ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-07 21:42:39 -07:00
Linus Torvalds d7a5926978 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (32 commits)
  [CIFS] Fix double list addition in cifs posix open code
  [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp
  [CIFS] Fix SMB uid in NTLMSSP authenticate request
  [CIFS] NTLMSSP reenabled after move from connect.c to sess.c
  [CIFS] Remove sparse warning
  [CIFS] remove checkpatch warning
  [CIFS] Fix final user of old string conversion code
  [CIFS] remove cifs_strfromUCS_le
  [CIFS] NTLMSSP support moving into new file, old dead code removed
  [CIFS] Fix endian conversion of vcnum field
  [CIFS] Remove trailing whitespace
  [CIFS] Remove sparse endian warnings
  [CIFS] Add remaining ntlmssp flags and standardize field names
  [CIFS] Fix build warning
  cifs: fix length handling in cifs_get_name_from_search_buf
  [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status
  [CIFS] rename cifs_strndup to cifs_strndup_from_ucs
  Added loop check when mounting DFS tree.
  Enable dfs submounts to handle remote referrals.
  [CIFS] Remove older session setup implementation
  ...
2009-05-07 21:13:24 -07:00
Steve French 90e4ee5d31 [CIFS] Fix double list addition in cifs posix open code
Remove adding open file entry twice to lists in the file
Do not fill file info twice in case of posix opens and creates

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-08 03:04:30 +00:00
David Howells 8c9ed899b4 NOMMU: Don't check vm_region::vm_start is page aligned in add_nommu_region()
Don't check vm_region::vm_start is page aligned in add_nommu_region() because
the region may reflect some non-page-aligned mapped file, such as could be
obtained from RomFS XIP.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-07 12:03:41 -07:00
Linus Torvalds ee7fee0b91 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: remove rd%d links immediately after stopping an array.
  md: remove ability to explicit set an inactive array to 'clean'.
  md: constify VFTs
  md: tidy up status_resync to handle large arrays.
  md: fix some (more) errors with bitmaps on devices larger than 2TB.
  md/raid10: don't clear bitmap during recovery if array will still be degraded.
  md: fix loading of out-of-date bitmap.
2009-05-07 12:01:41 -07:00
Linus Torvalds 8a0a9bd4db random: make get_random_int() more random
It's a really simple patch that basically just open-codes the current
"secure_ip_id()" call, but when open-coding it we now use a _static_
hashing area, so that it gets updated every time.

And to make sure somebody can't just start from the same original seed of
all-zeroes, and then do the "half_md4_transform()" over and over until
they get the same sequence as the kernel has, each iteration also mixes in
the same old "current->pid + jiffies" we used - so we should now have a
regular strong pseudo-number generator, but we also have one that doesn't
have a single seed.

Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It
has no real meaning. It could be anything. I just picked the previous
seed, it's just that now we keep the state in between calls and that will
feed into the next result, and that should make all the difference.

I made that hash be a per-cpu data just to avoid cache-line ping-pong:
having multiple CPU's write to the same data would be fine for randomness,
and add yet another layer of chaos to it, but since get_random_int() is
supposed to be a fast interface I did it that way instead. I considered
using "__raw_get_cpu_var()" to avoid any preemption overhead while still
getting the hash be _mostly_ ping-pong free, but in the end good taste won
out.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-07 11:59:06 -07:00
Linus Torvalds 2c66fa7e6b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
  [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
  i.MX31: Disable CPU_32v6K in mx3_defconfig.
  mx3fb: Fix compilation with CONFIG_PM
  mx27ads: move PBC mapping out of vmalloc space
  MXC: remove BUG_ON in interrupt handler
  mx31: remove mx31moboard_defconfig
  ARM: ARCH_MXC should select HAVE_CLK
  mxc : BUG in imx_dma_request
  mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
  [ARM] mv78xx0: update defconfig
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".
  [ARM] S3C2412: Add missing cache flush in suspend code
  [ARM] S3C: Add UDIVSLOT support for newer UARTS
  [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
2009-05-07 10:54:32 -07:00
Paul Gortmaker ae51e60984 [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.

Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07 17:21:01 +01:00
Kevin Hilman a029b706d3 [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
As per commit 284901a90a, use
DMA_BIT_MASK(n)

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07 14:44:47 +01:00
NeilBrown c4647292fd md: remove rd%d links immediately after stopping an array.
md maintains link in sys/mdXX/md/ to identify which device has
which role in the array. e.g.
   rd2 -> dev-sda

indicates that the device with role '2' in the array is sda.

These links are only present when the array is active.  They are
created immediately after ->run is called, and so should be removed
immediately after ->stop is called.
However they are currently removed a little bit later, and it is
possible for ->run to be called again, thus adding these links, before
they are removed.

So move the removal earlier so they are consistently only present when
the array is active.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:51:06 +10:00
NeilBrown 5bf2959754 md: remove ability to explicit set an inactive array to 'clean'.
Being able to write 'clean' to an 'array_state' of an inactive array
to activate it in 'clean' mode is both unnecessary and inconvenient.

It is unnecessary because the same can be achieved by writing
'active'.  This activates and array, but it still remains 'clean'
until the first write.

It is inconvenient because writing 'clean' is more often used to
cause an 'active' array to revert to 'clean' mode (thus blocking
any writes until a 'write-pending' is promoted to 'active').

Allowing 'clean' to both activate an array and mark an active array as
clean can lead to races:  One program writes 'clean' to mark the
active array as clean at the same time as another program writes
'inactive' to deactivate (stop) and active array.  Depending on which
writes first, the array could be deactivated and immediately
reactivated which isn't what was desired.

So just disable the use of 'clean' to activate an array.

This avoids a race that can be triggered with mdadm-3.0 and external
metadata, so it suitable for -stable.

Reported-by: Rafal Marszewski <rafal.marszewski@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:50:57 +10:00
Jan Engelhardt 110518bccf md: constify VFTs
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:49:37 +10:00
NeilBrown dd71cf6b27 md: tidy up status_resync to handle large arrays.
Two problems in status_resync.
1/ It still used Kilobytes as the basic block unit, while most code
   now uses sectors uniformly.
2/ It doesn't allow for the possibility that max_sectors exceeds
   the range of "unsigned long".

So
 - change "max_blocks" to "max_sectors", and store sector numbers
   in there and in 'resync'
 - Make 'rt' a 'sector_t' so it can temporarily hold the number of
   remaining sectors.
 - use sector_div rather than normal division.
 - change the magic '100' used to preserve precision to '32'.
   + making it a power of 2 makes division easier
   + it doesn't need to be as large as it was chosen when we averaged
     speed over the entire run.  Now we average speed over the last 30
     seconds or so.

Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:49:35 +10:00
NeilBrown db305e507d md: fix some (more) errors with bitmaps on devices larger than 2TB.
If a write intent bitmap covers more than 2TB, we sometimes work with
values beyond 32bit, so these need to be sector_t.  This patches
add the required casts to some unsigned longs that are being shifted
up.

This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with
member devices that are larger than 2TB.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Cc: stable@kernel.org
2009-05-07 12:49:06 +10:00
NeilBrown 1805556912 md/raid10: don't clear bitmap during recovery if array will still be degraded.
If we have a raid10 with multiple missing devices, and we recover just
one of these to a spare, then we risk (depending on the bitmap and
array chunk size) clearing bits of the bitmap for which recovery isn't
complete (because a device is still missing).

This can lead to a subsequent "re-add" being recovered without
any IO happening, which would result in loss of data.

This patch takes the safe approach of not clearing bitmap bits
if the array will still be degraded.

This patch is suitable for all active -stable kernels.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:48:10 +10:00
NeilBrown b74fd2826c md: fix loading of out-of-date bitmap.
When md is loading a bitmap which it knows is out of date, it fills
each page with 1s and writes it back out again.  However the
write_page call makes used of bitmap->file_pages and
bitmap->last_page_size which haven't been set correctly yet.  So this
can sometimes fail.

Move the setting of file_pages and last_page_size to before the call
to write_page.

This bug can cause the assembly on an array to fail, thus making the
data inaccessible.  Hence I think it is a suitable candidate for
-stable.

Cc: stable@kernel.org
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-05-07 12:47:19 +10:00
Andrew Morton 60db402780 drivers/base/iommu.c: add missing includes
Fix zillions of -mm x86_64 allmodconfig build errors - the file uses
EXPORT_SYMBOL() and kmalloc but misses the needed includes.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Eric Piel a1e6b6c1a6 initramfs: clean up messages related to initramfs unpacking
With the removal of duplicate unpack_to_rootfs() (commit
df52092f3c) the messages displayed do not
actually correspond to what the kernel is doing.  In addition, depending
if ramdisks are supported or not, the messages are not at all the same.

So keep the messages more in sync with what is really doing the kernel,
and only display a second message in case of failure.  This also ensure
that the printk message cannot be split by other printk's.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
David Howells fc4d5c292b nommu: make the initial mmap allocation excess behaviour Kconfig configurable
NOMMU mmap() has an option controlled by a sysctl variable that determines
whether the allocations made by do_mmap_private() should have the excess
space trimmed off and returned to the allocator.  Make the initial setting
of this variable a Kconfig configuration option.

The reason there can be excess space is that the allocator only allocates
in power-of-2 size chunks, but mmap()'s can be made in sizes that aren't a
power of 2.

There are two alternatives:

 (1) Keep the excess as dead space.  The dead space then remains unused for the
     lifetime of the mapping.  Mappings of shared objects such as libc, ld.so
     or busybox's text segment may retain their dead space forever.

 (2) Return the excess to the allocator.  This means that the dead space is
     limited to less than a page per mapping, but it means that for a transient
     process, there's more chance of fragmentation as the excess space may be
     reused fairly quickly.

During the boot process, a lot of transient processes are created, and
this can cause a lot of fragmentation as the pagecache and various slabs
grow greatly during this time.

By turning off the trimming of excess space during boot and disabling
batching of frees, Coldfire can manage to boot.

A better way of doing things might be to have /sbin/init turn this option
off.  By that point libc, ld.so and init - which are all long-duration
processes - have all been loaded and trimmed.

Reported-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
David Howells 3a6be87fd1 nommu: clamp zone_batchsize() to 0 under NOMMU conditions
Clamp zone_batchsize() to 0 under NOMMU conditions to stop
free_hot_cold_page() from queueing and batching frees.

The problem is that under NOMMU conditions it is really important to be
able to allocate large contiguous chunks of memory, but when munmap() or
exit_mmap() releases big stretches of memory, return of these to the buddy
allocator can be deferred, and when it does finally happen, it can be in
small chunks.

Whilst the fragmentation this incurs isn't so much of a problem under MMU
conditions as userspace VM is glued together from individual pages with
the aid of the MMU, it is a real problem if there isn't an MMU.

By clamping the page freeing queue size to 0, pages are returned to the
allocator immediately, and the buddy detector is more likely to be able to
glue them together into large chunks immediately, and fragmentation is
less likely to occur.

By disabling batching of frees, and by turning off the trimming of excess
space during boot, Coldfire can manage to boot.

Reported-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
David Howells 9155203a5d mm: use roundown_pow_of_two() in zone_batchsize()
Use roundown_pow_of_two(N) in zone_batchsize() rather than (1 <<
(fls(N)-1)) as they are equivalent, and with the former it is easier to
see what is going on.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Daniel Mack 74614f8d9d isl29003: fix resume functionality
The isl29003 does not interpret the return value of
i2c_smbus_write_byte_data() correctly and hence causes an error on system
resume.

Also introduce power_state_before_suspend and restore the chip's power
state upon wakeup.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Krzysztof Helt 57226e7898 fbdev: remove makefile reference to removed driver
The cyblafb driver is removed so remove its last trace in the makefile.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Ralph Wuerthner 2498ce42d3 alloc_vmap_area: fix memory leak
If alloc_vmap_area() fails the allocated struct vmap_area has to be freed.

Signed-off-by: Ralph Wuerthner <ralphw@linux.vnet.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Randy Dunlap ca1eda2d75 doc: small kernel-parameters updates
Change last "i386" to X86-32 as is used throughout the rest of the file.
Change combination of X86-32,X86-64 to just X86, as is done throughout the
rest of the file.

Add a note that hyphens and underscores are equivalent in parameter names,
with examples.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Christopher Sylvain <chris.sylvain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
Michal Januszewski bdca0f9b1e fbdev: fix fillrect for 24bpp modes
The software fillrect routines do not work properly when the number of
pixels per machine word is not an integer.  To see that, run the following
command on a fbdev console with a 24bpp video mode, using a
non-accelerated driver such as (u)vesafb:

  reset ; echo -e '\e[41mtest\e[K'

The expected result is 'test' displayed on a line with red background.
Instead of that, 'test' has a red background, but the rest of the line
(rendered using fillrect()) contains a distored colorful pattern.

This patch fixes the problem by correctly computing rotation shifts.  It
has been tested in a 24bpp mode on 32- and 64-bit little-endian machines.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:10 -07:00
David Rientjes 184101bf14 oom: prevent livelock when oom_kill_allocating_task is set
When /proc/sys/vm/oom_kill_allocating_task is set for large systems that
want to avoid the lengthy tasklist scan, it's possible to livelock if
current is ineligible for oom kill.  This normally happens when it is set
to OOM_DISABLE, but is also possible if any threads are sharing the same
->mm with a different tgid.

So change __out_of_memory() to fall back to the full task-list scan if it
was unable to kill `current'.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:09 -07:00
Josef Bacik df3935ffd6 fiemap: fix problem with setting FIEMAP_EXTENT_LAST
Fix a problem where the generic block based fiemap stuff would not
properly set FIEMAP_EXTENT_LAST on the last extent.  I've reworked things
to keep track if we go past the EOF, and mark the last extent properly.
The problem was reported by and tested by Eric Sandeen.

Tested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-btrfs@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:09 -07:00
Andi Kleen 57adc4d2db Eliminate thousands of warnings with gcc 3.2 build
When building with gcc 3.2 I get thousands of warnings such as

include/linux/gfp.h: In function `allocflags_to_migratetype':
include/linux/gfp.h:105: warning: null format string

due to passing a NULL format string to warn_slowpath() in

#define __WARN()		warn_slowpath(__FILE__, __LINE__, NULL)

Split this case out into a separate call.  This also shrinks the kernel
slightly:

          text    data     bss     dec     hex filename
       4802274  707668  712704 6222646  5ef336 vmlinux
          text    data     bss     dec     hex filename
       4799027  703572  712704 6215303  5ed687 vmlinux

due to removeing one argument from the commonly-called __WARN().

[akpm@linux-foundation.org: reduce scope of `empty']
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:09 -07:00
Hugh Dickins 429aa0fca0 doc: hashdist defaults on for 64bit
kernel boot parameter `hashdist' now defaults on for all 64bit NUMA.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:09 -07:00
Wu Fengguang 381a80e6df inotify: use GFP_NOFS in kernel_event() to work around a lockdep false-positive
There is what we believe to be a false positive reported by lockdep.

inotify_inode_queue_event() => take inotify_mutex => kernel_event() =>
kmalloc() => SLOB => alloc_pages_node() => page reclaim => slab reclaim =>
dcache reclaim => inotify_inode_is_dead => take inotify_mutex => deadlock

The plan is to fix this via lockdep annotation, but that is proving to be
quite involved.

The patch flips the allocation over to GFP_NFS to shut the warning up, for
the 2.6.30 release.

Hopefully we will fix this for real in 2.6.31.  I'll queue a patch in -mm
to switch it back to GFP_KERNEL so we don't forget.

  =================================
  [ INFO: inconsistent lock state ]
  2.6.30-rc2-next-20090417 #203
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/380 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&inode->inotify_mutex){+.+.?.}, at: [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
  {RECLAIM_FS-ON-W} state was registered at:
    [<ffffffff81079188>] mark_held_locks+0x68/0x90
    [<ffffffff810792a5>] lockdep_trace_alloc+0xf5/0x100
    [<ffffffff810f5261>] __kmalloc_node+0x31/0x1e0
    [<ffffffff81130652>] kernel_event+0xe2/0x190
    [<ffffffff81130826>] inotify_dev_queue_event+0x126/0x230
    [<ffffffff8112f096>] inotify_inode_queue_event+0xc6/0x110
    [<ffffffff8110444d>] vfs_create+0xcd/0x140
    [<ffffffff8110825d>] do_filp_open+0x88d/0xa20
    [<ffffffff810f6b68>] do_sys_open+0x98/0x140
    [<ffffffff810f6c50>] sys_open+0x20/0x30
    [<ffffffff8100c272>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
  irq event stamp: 690455
  hardirqs last  enabled at (690455): [<ffffffff81564fe4>] _spin_unlock_irqrestore+0x44/0x80
  hardirqs last disabled at (690454): [<ffffffff81565372>] _spin_lock_irqsave+0x32/0xa0
  softirqs last  enabled at (690178): [<ffffffff81052282>] __do_softirq+0x202/0x220
  softirqs last disabled at (690157): [<ffffffff8100d50c>] call_softirq+0x1c/0x50

  other info that might help us debug this:
  2 locks held by kswapd0/380:
   #0:  (shrinker_rwsem){++++..}, at: [<ffffffff810d0bd7>] shrink_slab+0x37/0x180
   #1:  (&type->s_umount_key#17){++++..}, at: [<ffffffff8110cfbf>] shrink_dcache_memory+0x11f/0x1e0

  stack backtrace:
  Pid: 380, comm: kswapd0 Not tainted 2.6.30-rc2-next-20090417 #203
  Call Trace:
   [<ffffffff810789ef>] print_usage_bug+0x19f/0x200
   [<ffffffff81018bff>] ? save_stack_trace+0x2f/0x50
   [<ffffffff81078f0b>] mark_lock+0x4bb/0x6d0
   [<ffffffff810799e0>] ? check_usage_forwards+0x0/0xc0
   [<ffffffff8107b142>] __lock_acquire+0xc62/0x1ae0
   [<ffffffff810f478c>] ? slob_free+0x10c/0x370
   [<ffffffff8107c0a1>] lock_acquire+0xe1/0x120
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81562d43>] mutex_lock_nested+0x63/0x420
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81012fe9>] ? sched_clock+0x9/0x10
   [<ffffffff81077165>] ? lock_release_holdtime+0x35/0x1c0
   [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8110c9dc>] dentry_iput+0xbc/0xe0
   [<ffffffff8110cb23>] d_kill+0x33/0x60
   [<ffffffff8110ce23>] __shrink_dcache_sb+0x2d3/0x350
   [<ffffffff8110cffa>] shrink_dcache_memory+0x15a/0x1e0
   [<ffffffff810d0cc5>] shrink_slab+0x125/0x180
   [<ffffffff810d1540>] kswapd+0x560/0x7a0
   [<ffffffff810ce160>] ? isolate_pages_global+0x0/0x2c0
   [<ffffffff81065a30>] ? autoremove_wake_function+0x0/0x40
   [<ffffffff8107953d>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff810d0fe0>] ? kswapd+0x0/0x7a0
   [<ffffffff8106555b>] kthread+0x5b/0xa0
   [<ffffffff8100d40a>] child_rip+0xa/0x20
   [<ffffffff8100cdd0>] ? restore_args+0x0/0x30
   [<ffffffff81065500>] ? kthread+0x0/0xa0
   [<ffffffff8100d400>] ? child_rip+0x0/0x20

[eparis@redhat.com: fix audit too]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 16:36:09 -07:00
Breno Leitao fd1e6c1df5 jsm: removing unused spinlock
This patch removes bd_lock spinlock (inside jsm_board structure).
The lock is initialized in the probe function and not used anymore.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 14:47:13 -07:00
Alan Cox fab892232e vt: Add a note on the historical abuse of CLOCK_TICK_RATE
This is one area where we can't just magic away the bizarre use of
CLOCK_TICK_RATE as it leaks to user space APIs. It also means the visible
CLOCK_TICK_RATE is frozen for architectures which is horrible.

We need to fix this somehow

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06 14:47:13 -07:00
Nikanth Karthikesan e0e5ea3268 x86: Fix a typo in a printk message
[ Impact: printk message cleanup ]

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200905040908.27299.knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 12:23:12 +02:00