Commit Graph

649973 Commits

Author SHA1 Message Date
Wei Yongjun c5a828148f drm: mxsfb: Make local symbol mxsfb_funcs static
Fixes the following sparse warning:

drivers/gpu/drm/mxsfb/mxsfb_drv.c:129:38: warning:
 symbol 'mxsfb_funcs' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170205160538.16594-1-weiyj.lk@gmail.com
2017-02-06 16:57:36 +01:00
Wei Yongjun e6cf7e9808 drm: mxsfb: fix error return code in mxsfb_load()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170205160036.7364-1-weiyj.lk@gmail.com
2017-02-06 16:57:36 +01:00
Andrey Grodzovsky 612fb5d9f4 drm/nouveau/kms/nv50: Switch to using atomic helper for flip.
v2:
Update code after flip_flags moved from plane_state
to crtc_state

v5:
Rename to pageflip_flags.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-3-git-send-email-Andrey.Grodzovsky@amd.com
2017-02-03 12:32:48 -05:00
Andrey Grodzovsky 6cbe5c466d drm/atomic: Save flip flags in drm_crtc_state
Allows using atomic flip helpers for drivers
using ASYNC flip.
Remove ASYNC_FLIP restriction in helpers and
caches the page flip flags in drm_crtc_state
to be used in the low level drivers.

v2:
Resending the patch since the original was broken.

v3:
Save flag in crtc_state instead of plane_state

v4:
Reset the flag before using again.

v5:
Fix type in header.
Rename the field to pageflip_flags.
Remove unrelated hunk.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-2-git-send-email-Andrey.Grodzovsky@amd.com
2017-02-03 12:32:20 -05:00
Chris Wilson bb18dfcc64 drm: kselftest for drm_mm and bottom-up allocation
Check that if we request bottom-up allocation from drm_mm_insert_node()
we receive the next available hole from the bottom.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202114434.3060-2-chris@chris-wilson.co.uk
2017-02-03 11:36:49 +01:00
Chris Wilson 4e64e5539d drm: Improve drm_mm search (and fix topdown allocation) with rbtrees
The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.

In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.

v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 11:10:32 +01:00
Daniel Vetter 17aad8a340 Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next
Yet another backmerge to get at latest etnaviv code, which is need for
Chris' drm_mm patch.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-03 11:09:36 +01:00
Dave Airlie 99743ae4c5 Merge branch 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux into drm-next
It includes code cleanups from Bhumika and Liviu, a significant shader
performance fix and additions to the cmdstream validator from Wladimir
and the addition of a cmdbuf suballocator by myself.
The suballocator improves performance on all chips by reducing the CPU
overhead of the kernel driver and side steps the GC3000 FE MMU flush
erratum, now making the workarounds in IOVA allocation we had before
unnecessary, which results in a nice cleanup of the code in that area.

* 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: Remove duplicate header file include
  Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"
  drm/etnaviv: add cmdbuf suballocator
  drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction
  drm/etnaviv: wire up iova handling in new cmdbuf abstraction
  drm/etnaviv: move cmdbuf de-/allocation into own file
  drm/etnaviv: always flush MMU TLBs on map/unmap
  drm/etnaviv: constify etnaviv_iommu_ops structures
  drm/etnaviv: set up initial PULSE_EATER register
  drm/etnaviv: add new GC3000 sensitive states
2017-02-03 05:41:58 +10:00
Gabriel Krisman Bertazi 7e6328fd1f drm: Fix build when FBDEV_EMULATION is disabled
Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper
initialization") broke the build when CONFIG_DRM_FBDEV_EMULATION is
disabled because it didn't update the prototype for drm_fb_helper_init
in that case.

Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper
 initialization")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202193900.22075-1-krisman@collabora.co.uk
2017-02-02 20:40:32 +01:00
Gabriel Krisman Bertazi e4563f6ba7 drm: Rely on mode_config data for fb_helper initialization
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure.  I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.

I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates.  The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.

// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)

@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)

@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>

Changes since v1:
 - Rebased on top of the tip of drm-misc-next.
 - Remove mention to sti since a proper fix got merged.

Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-02 19:12:00 +01:00
Chris Wilson f30c92576a drm: Provide a driver hook for drm_dev_release()
Some state is coupled into the device lifetime outside of the
load/unload timeframe and requires teardown during final unreference
from drm_dev_release(). For example, dmabufs hold both a device and
module reference and may live longer than expected (i.e. the current
pattern of the driver tearing down its state and then releasing a
reference to the drm device) and yet touch driver private state when
destroyed.

v2: Export drm_dev_fini() and move the responsibility for finalizing the
drm_device and freeing it to the release callback. (If no callback is
provided, the core will call drm_dev_fini() and kfree(dev) as before.)
v3: Remember to add drm_dev_fini() to drm_drv.h
v4: Tidy language for kerneldoc
v5: Cross reference from drm_dev_init() to note that driver->release()
allows for arbitrary embedding.
v6: Refer to driver data rather than driver state, as state is now
becoming associated with the struct drm_atomic_state and friends.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Use the proper reference for struct members, which is
&drm_driver.release.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk
2017-02-02 15:58:06 +01:00
Neil Armstrong 8aaacbc0e5 drm: meson: rename driver name to meson-drm
The platform driver name is currently "meson" which can lead to some
confusion, this patch renames it to "meson-drm" and removes the owner
attribute since is always added by __platform_driver_register called by the
module_platform_driver() macro.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-3-git-send-email-narmstrong@baylibre.com
2017-02-02 15:19:56 +01:00
Neil Armstrong 3e6e2fd553 drm: meson: rename module name to meson-drm
The module is currently named "meson.ko" which can lead to some
confusion, this patches renames it "meson-drm.ko"

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-2-git-send-email-narmstrong@baylibre.com
2017-02-02 15:19:53 +01:00
Andrzej Hajda 45d0ea86d2 drm/bridge/sii8620: enable interlace modes
Bug in DECON(CRTC) driver prevented interlace modes from proper work.
Since DECON is fixed interlace modes can be enabled in MHL.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:31 +05:30
Andrzej Hajda 9fc6ade810 drm/bridge/sii8620: enable MHL3 mode if possible
Since all sub-protocols of MHL3 are already supported MHL3 mode can be
enabled. With this patch it is possible to use packed pixel modes and
clocks up to 300MHz - 1920x1080@60Hz and 4K modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-25-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:31 +05:30
Andrzej Hajda a21e658bfb drm/bridge/sii8620: add HSIC initialization code
In case of MHL3 HSIC should be initialized.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-24-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:30 +05:30
Andrzej Hajda 581a923730 drm/bridge/sii8620: improve gen2 write burst IRQ routine
The patch adds code to report back feature complete IRQ, and code
to read and drop burst writes from peer.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-23-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:30 +05:30
Andrzej Hajda 269ed8eec9 drm/bridge/sii8620: send EMSC features on request
Device should report to the peer which features are really supported.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-22-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:29 +05:30
Andrzej Hajda bf1722cab5 drm/bridge/sii8620: rewrite hdmi start sequence
MHL3 protocol requires registry adjustments depending on chosen video mode.
Necessary information is gathered in mode_fixup callback. In case of HDMI
video modes driver should also send special AVI and MHL3 infoframes.
The patch introduces generic helpers for handling MHL3 infoframes, in
case of appearance of other users of MHL3 infoframes these function can
be moved to common library.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-21-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:29 +05:30
Andrzej Hajda be1cd6fe20 drm/bridge/mhl: add MHL3 infoframe related definitions
MHL3 protocol uses vendor specific infoframes to transmit additional
information to the sink. This patch adds definitions of structures and
constants used to create such frames.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-20-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:29 +05:30
Andrzej Hajda 003f9929f8 drm/bridge/sii8620: fix disconnect sequence
The patch allows to avoid rare cases when discovery fails.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-19-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:28 +05:30
Andrzej Hajda 263b5c93a2 drm/bridge/sii8620: split EDID read and write code
MHL3 requires that after reading EDID from the sink source should ask
peer for features. To make both protocols happy the patch splits the code
accordingly.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-18-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:28 +05:30
Andrzej Hajda 4dc3c07127 drm/bridge/sii8620: add delay during cbus reset
Without delay CBUS sometimes was not reset properly.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-17-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:27 +05:30
Andrzej Hajda 6bed9bc2ae drm/bridge/sii8620: do not stop MHL output when TMDS input is stopped
Stopping output causes full re-detection of the sink and slows down the
process.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-16-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:27 +05:30
Andrzej Hajda 26a4cef815 drm/bridge/sii8620: set gen2 write burst before sending MSC command
Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for
other commands. The patch moves functions up and adds delay setting
for MHL3 burst mode.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-15-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:26 +05:30
Andrzej Hajda 9a466cd1dd drm/bridge/sii8620: abstract out sink detection code
MHL1 and MHL3 have different initialization paths. To make both protocols
happy sink detection is put into continuation after link mode enablement.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-14-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:26 +05:30
Andrzej Hajda ef822a0745 drm/bridge/sii8620: fix initialization sequence for MHL2 receivers
MHL2 receiver require disabling transmitter on initialization.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-13-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:26 +05:30
Andrzej Hajda d6d59c5a57 drm/bridge/sii8620: fix MSC message removal
Messages queue can be cleaned up by message callbacks, to avoid repeated
removal of current message it should be removed from the queue before
calling these callbacks.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-12-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:25 +05:30
Andrzej Hajda 73a5d25d50 drm/bridge/sii8620: remove spare CBUS bring-up sequence
In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-11-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:25 +05:30
Andrzej Hajda e3a654872d drm/bridge/sii8620: fix peer device capabilities read code
Peer capabilities should be read differently depending on protocol version.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-10-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:24 +05:30
Andrzej Hajda 4a36888585 drm/bridge/sii8620: respond to feature requests
MHL3 protocol requires device to respond to feature request from peer.
This minimal answer fulfills the requirement and allows to continue
negotiation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-9-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:24 +05:30
Andrzej Hajda e19e9c692f drm/bridge/sii8620: add support for burst eMSC transmissions
Burst transmissions are used in MHL3 mode negotiation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-8-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:24 +05:30
Andrzej Hajda 981b3f3724 drm/bridge/mhl: add write burst related definitions
Burst transmissions are required in MHL3 modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-7-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:23 +05:30
Andrzej Hajda 2c8fb853c0 drm/bridge/sii8620: initial support for eCBUS-S mode
The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex
bidirectional traffic for three channels:
 - CBUS data (CBUS1 channel),
 - High-bandwidth MHL data (eMSC channel),
 - tunneling data (T-CBUS channel).
It is required to fully support MHL3 dongles.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:23 +05:30
Andrzej Hajda 0c2d18756b drm/bridge/sii8620: add continuations to messages
Due to asynchronous nature of MHL flow of execution is dispersed.
Logical continuation of some actions happens after response of peer,
i.e in interrupt handler. To simplify coding continuation mechanism
has been added - it is now possible to provide continuation callback,
which will be called after peer responds to given action.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-5-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:22 +05:30
Andrzej Hajda e9c6da270a drm/bridge/sii8620: add reading device capability registers
This functionality is necessary to implement MHL3 modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-4-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:22 +05:30
Andrzej Hajda bb4954c77c drm/bridge/sii8620: add MHL3 mode check helper
MHL3 modes differs significantly from MHL1 mode, this helper will be used
frequently to clearly distinguish them.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-3-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:22 +05:30
Andrzej Hajda dd12312906 drm/bridge/sii8620: simplify MHL3 mode setting
It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-2-git-send-email-a.hajda@samsung.com
2017-02-02 15:15:21 +05:30
Liviu Dudau 82260364fd drm/etnaviv: Remove duplicate header file include
etnaviv_gem.h header gets included twice. Remove duplicate.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-02-02 10:30:51 +01:00
Lucas Stach e17d0bf23f Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"
Now that commandstreams are handled through the cmdbuf suballocator
the workaround to make the IOVA games work is not needed anymore.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:43 +01:00
Lucas Stach e66774dd6f drm/etnaviv: add cmdbuf suballocator
There are 3 big benefits to suballocating a single big DMA buffer
for command submission:

1. Avoid hammering CMA. The old way of allocating and freeing a DMA
   buffer for each submission was hitting some of the real slow
   pathes in CMA, as this allocator was not designed for a concurrent
   small buffers load.

2. Less TLB flushes on IOMMUv2. If a new command buffer is mapped into
   the GPU address space the MMU TLBs need to be flushed. By having
   one big buffer statically mapped to the GPU, a lot of those flushes
   can be avoided.

3. No funky workarounds for GC3000. The FE TLB flush on GC3000 isn't
   reliable. To work around that we tried to lay out the cmdbufs in
   the GPU address space in a way to avoid this issue. This hasn't
   always worked if the address space is crowded. A single statically
   mapped buffer avoids the erratum completely.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:37 +01:00
Lucas Stach 9912b4db7b drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction
Don't allow IOMMUv2 to peek directly into the cmdbuf, but get the
needed PA through a dedicated function.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:27 +01:00
Lucas Stach c3ef4b8c3e drm/etnaviv: wire up iova handling in new cmdbuf abstraction
Don't call the IOMMU directly, but go through the new cmdbuf abstraction.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:20 +01:00
Lucas Stach ea1f5729aa drm/etnaviv: move cmdbuf de-/allocation into own file
This will get more complex with the following changes, so move it
into its own place.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:15 +01:00
Lucas Stach d46450737c drm/etnaviv: always flush MMU TLBs on map/unmap
This ensures that the GPU isn't able to write into already freed
objects, as doing this in the IOVA reaper isn't enough, as the
gem_free_object path will also cause unmaps to happen.

On MMUv2 this also ensures that stale entries, which may have
been prefetched into the TLB will be purged.

The flush is low overhead, as it gets batched up with the next
user command buffer, so this isn't incuring an overhead for
each buffer map/unmap.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-02-02 10:30:08 +01:00
Bhumika Goyal bc179f08d2 drm/etnaviv: constify etnaviv_iommu_ops structures
Declare etnaviv_iommu_ops structure as const as it is only used when
the reference of one of its field is stored in the ops field of a
iommu_domain structure. This ops field is of type const, so
etnaviv_iommu_ops structures having similar properties can be declared
const too.

Done using Coccinelle.
Before and after size details of .o file remains the same after
cross compiling for arm architecture.

lst: Trimmed commit message, apply the same change to iommu_v2.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-02-02 10:29:52 +01:00
Gabriel Krisman Bertazi cbdded7f8a drm: qxl: Embed drm_device into driver structure
This is the recommended way to create the drm_device structure,
according to DRM documentation.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02 10:02:37 +01:00
Gabriel Krisman Bertazi d74d74aeaf drm: qxl: Drop duplicated pci_device pointer attribute
qxl_device duplicates the pointer to struct pci_dev, which is not
needed since we already have it in the drm_device structure.  Clean it
up.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-3-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02 10:02:36 +01:00
Gabriel Krisman Bertazi 5472bdee3f drm: qxl: Drop duplicated device pointer attribute
qxl_device duplicates a pointer to struct device, which is not needed
since we already have it in the drm_device structure.  Clean it up.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-2-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02 10:02:34 +01:00
Gabriel Krisman Bertazi 768851b92c drm: qxl: Drop misleading comment
No longer true since commit 07f8d9bdb2 ("drm/qxl: add support for > 1
output").  qxl_num_crtc defaults to 4 and is configurable as a module
parameter.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02 10:02:33 +01:00