It uses getname in unsafe manner and since it's to deal with corrupted
or inconsistent filesystem, we are probably better to deal with
it from lfsck anyway.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle. Some of these are actually
improvements / fixes for patches earlier in the cycle.
New device support
* st_accel driver - support devices with 8 bit channels.
Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
I'm more than a little embarassed by how bad some of these were! Are well,
much more refined and less bug prone now.
These cover lots of stuff like unhandled error returns, memory leaks as
well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
pointless error returns from functions that never generate errors and
make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
buffers (a little used corner that looks likely to get more use in the near
future). Specifically:
- Always compute the masklength as inkernel buffer users may need it.
- Add a means of labeling which buffer modes a given buffer implementation
supports.
- In the case of hardware buffers, require strict scan matching rather than
matching to a superset. Currently the demux is bypassed by these drivers
(this may well not change for efficiency reasons) so allowing a superset
of channels to be selected would otherwise lead to more data than requested
confusing userspace.
Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
own input driver.
* mma8452
- event support
- event debouncing
- high pass filter configuration
- triggers
* vf610 - allow conversion mode to be adjusted
Fixlets
* mmc35240
- Off by one error that by coincidence had no real effect.
- i2c_device_name should be lowercase.
- Lack of null terminator at end of attributes array.
- Avoid computing the fractional part of the magnetic field by moving
the scaling into userspace where floating point is available to simplify
the maths.
- Use a smaller sleep before assuming the measurement is done. This is
safe and improves the possible polling rate.
- Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
- fix calculation of the temperature sense current - bug unlikely
to have ever been noticed as the difference is small.
- Fix errors in descriptions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sNVc
-----END PGP SIGNATURE-----
Merge tag 'iio-for-v4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.
Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle. Some of these are actually
improvements / fixes for patches earlier in the cycle.
New device support
* st_accel driver - support devices with 8 bit channels.
Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
I'm more than a little embarassed by how bad some of these were! Are well,
much more refined and less bug prone now.
These cover lots of stuff like unhandled error returns, memory leaks as
well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
pointless error returns from functions that never generate errors and
make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
buffers (a little used corner that looks likely to get more use in the near
future). Specifically:
- Always compute the masklength as inkernel buffer users may need it.
- Add a means of labeling which buffer modes a given buffer implementation
supports.
- In the case of hardware buffers, require strict scan matching rather than
matching to a superset. Currently the demux is bypassed by these drivers
(this may well not change for efficiency reasons) so allowing a superset
of channels to be selected would otherwise lead to more data than requested
confusing userspace.
Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
own input driver.
* mma8452
- event support
- event debouncing
- high pass filter configuration
- triggers
* vf610 - allow conversion mode to be adjusted
Fixlets
* mmc35240
- Off by one error that by coincidence had no real effect.
- i2c_device_name should be lowercase.
- Lack of null terminator at end of attributes array.
- Avoid computing the fractional part of the magnetic field by moving
the scaling into userspace where floating point is available to simplify
the maths.
- Use a smaller sleep before assuming the measurement is done. This is
safe and improves the possible polling rate.
- Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
- fix calculation of the temperature sense current - bug unlikely
to have ever been noticed as the difference is small.
- Fix errors in descriptions.
Eliminate "space prohibited before that ','" errors found by checkpatch,
but do this only to lines which after the patch is applied do not
exceed 80 characters. Out of that only those lines are changed, whose
context does not exceed 80 characters in each line. In other words the
changes are limited to cases where the patch generated is itself
checkpatch-correct.
Rebased onto next-20150605.
Signed-off-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a space prohibited before that ',' and space required after
that ',' error in lustre/lustre/obdclass/dt_object.c that were
found by the checkpatch.pl tool.
Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a braces {} are not necessary for any arm of this statement
warning in lustre/lustre/obdclass/dt_object.c that was found by
the checkpatch.pl tool.
Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a line over 80 characters warining in
lustre/lustre/obdclass/dt_object.c that was found by the
checkpatch.pl tool.
Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Point to the right place for GNU license. Update Intel copyright.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle all the style issues reported by checkpatch.pl.
Remove general white spaces, spaces in function calls,
etc.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of handling calls to struct proto ourselves we can use
equivalent kernel wrappers. No wrapper exist for unlocked ioctl
handling so we create one here for our use. I expect some day
that function will be integrated into sock.c.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With all the TCPIP handling done in the lnet layer we should
rename all the functions with the prefix lnet_*. One other
change done was changing the remove argument of lnet_sock_getaddr
from a int to a bool.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another one of those silly one line wrappers which is not
needed. Replace libcfs_sock_abort_accept wrapper with a
direct call to wake_up_all on the lnet_acceptor_state sock.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason to have a one line exported function
libcfs_sock_release. Instead we can call sock_release directly.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aligned enum members and defines to follow a common style
per enum/(group of defines).
Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed 'return(X)' to 'return X' in coreconfigurator.c
to satisfy checkpatch.pl warning:
ERROR: return is not a function, parentheses are not required
Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In accordance to checkpatch.pl, a space before a quoted
newline ("\n") is unnecessary, therefore substituted " \n"
with "\n" in coreconfigurator.c
Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is for the initialization of the local variables.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This remove compile warnings about printk format.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a build warning related to the use of the time_after_eq
macro.Adding a typecast to the second argument suppresses the
warning.This warning was created by one my previous patch.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
removed few variables which are assigned but
never used.
Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
while building on i386 it gives a build warning about msg undeclared.
Fixes: e6ffd1ba55 ("staging: fbtft: fix out of bound access")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for the LIS331DL sensor version. This is
a simple 8bit-only accelerometer.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Convert spaces at the start of a line to a tab.
Signed-off-by: Markus Böhme <markus.boehme@mailbox.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The indenting here causes a static checker warning:
drivers/staging/rtl8192e/rtllib_rx.c:626 RxReorderIndicatePacket()
warn: curly braces intended?
The code is actually correct, it's just that these lines were pushed in
an extra indent level by mistake in 35e33b0468 ('staging: rtl8192e:
Fix LONG_LINE warnings').
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mp_adapter structure was used in past, but now is only initialized and
never read.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused members of rtl8192_priv structure.
Some of them are never used, other are just initialized and
never accessed.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Remove unused fields in dig_t structures. Some of them were only
initialized and never accessed.
- Remove unused enums/macros/defines in rtl_dm.h
- Remove duplicated function declarations
- Remove unused dm_change_dynamic_initgain_thresh() function
- Remove unused dm_shadow_init() function
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both functions are never used.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove cmpk_message_handle_rx() and static functions used by it.
This function was never called.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove cmpk_handle_query_config_rx function. It is called
once, does some calculation, but generates no output -
it has neither return value, nor modify its parameters.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove two lines at ieee80211_wep_null which checkpatch.pl reported as errors.
The first one because it has a C99 comment style and the second one because it is a void
return which is useless.
The function ieee80211_wep_null cannot be completely removed because it is exported and
used to autoload the module.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify prism2_wep_init error check code employing goto when a failure is detected.
Removed pr_debug which was given a checkpatch.pl error because of literal string
splitted across two lines of code, it was seldom going to be printed anyway.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warnings:
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: expected restricted __le16 [usertype] frame_ctl
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: got int
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: warning: invalid assignment: |=
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: left side has type restricted __le16
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: right side has type int
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
auth_parse() return result is in incorrect le16 byte order. Currently
this still works since the user code merely checks if error code is
equal to 0. However debug statement in ieee80211_check_auth_response()
prints the error code in the incorrect le16 byte order. This fix
corrects the byte order as cpu order.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The underflow in OZ_DATA_F_ISOC_FIXED seems not harmful, but this patch
is a clean up and makes my static checker a bit happier.
The underflow in OZ_VENDOR_CLASS_RSP seems like it could result in
memory corruption.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed commented macro that was no longer needed
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a table to get a channel plan from a given country code.This was a
TODO mentioned as a comment in the driver.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We already have a inline pci_get_bus_and_slot() in include/linux/pci.h,
Use it instead of local one.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix reported by coccinelle compressing last two lines with single return
call
Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the bus device was created the list_all variables were not
being initialized. When the CONTROLVM_BUS_CONFIGURE message
was being sent, it was failing to find the bus and produced a
panic. Initialize the bus_info->list_all variable by doing a
INIT_LIST_HEAD.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When unloading a module, we need to cleanup the platform registration.
However, unregistering the platform uncovered a couple of quirks, namely
a missing device_release function. Fix things up so module unload works
and allows us to reload the module.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we combined visorchipset and visorbus into one driver we negelected
to strip out some of the MODULE_ stuff from one of the files. When
building the drivers in, it causes a WARN that we try to create
/proc/modules/visorbus/version when it is already created.
visorchipset.c is the driver entry point, remove the cruft from
visorbus_main.c.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of unused values in the enum.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diagchannel.h is used primarily for the diagnostics channel. The
diagnostics channel is not being used by linux guests currently, so
the majority of the file is not needed. What is left is what is
needed to perform postcode vmcalls. Those postcodes will eventually
end up in the diag channel.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin