To pick up the changes in:
2b57ecd020 ("KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()")
That don't cause any changes in the tools.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Link: https://lkml.kernel.org/n/tip-4pb7ywp9536hub2pnj4hu6i4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
We use syscall.tbl to generate system call table on powerpc.
The unistd.h copy is no longer required now. Remove it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On each sample, Monitor Mode Control Register A (MMCRA) content is
saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but
instead, MMCRA content is saved in the "dsisr" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the
"MMCRA" printing which internally maps to the "dsisr" of pt_regs.
It also check for the MMCRA availability in the platform and present
value accordingly
mpe: This was the 2nd patch in a series with commit 333804dc3b
("powerpc/perf: Update perf_regs structure to include SIER") but I
accidentally only merged the 1st patch, so merge this one now.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On each sample, Sample Instruction Event Register (SIER) content
is saved in pt_regs. SIER does not have a entry as-is in the pt_regs
but instead, SIER content is saved in the "dar" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the "SIER"
printing which internally maps to the "dar" of pt_regs.
It also check for the SIER availability in the platform and present
value accordingly
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For powerpc, s390, x86 and the main uapi linux/kvm.h header, none of
them entail changes in tooling.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-avn7iy8f4tcm2y40sbsdk31m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, on x86-64, perf uses LFENCE and MFENCE (rmb() and mb(),
respectively) when processing events from the perf ring buffer which
is unnecessarily expensive as we can do more lightweight in particular
given this is critical fast-path in perf.
According to Peter rmb()/mb() were added back then via a94d342b9c
("tools/perf: Add required memory barriers") at a time where kernel
still supported chips that needed it, but nowadays support for these
has been ditched completely, therefore we can fix them up as well.
While for x86-64, replacing rmb() and mb() with smp_*() variants would
result in just a compiler barrier for the former and LOCK + ADD for
the latter (__sync_synchronize() uses slower MFENCE by the way), Peter
suggested we can use smp_{load_acquire,store_release}() instead for
architectures where its implementation doesn't resolve in slower smp_mb().
Thus, e.g. in x86-64 we would be able to avoid CPU barrier entirely due
to TSO. For architectures where the latter needs to use smp_mb() e.g.
on arm, we stick to cheaper smp_rmb() variant for fetching the head.
This work adds helpers ring_buffer_read_head() and ring_buffer_write_tail()
for tools infrastructure that either switches to smp_load_acquire() for
architectures where it is cheaper or uses READ_ONCE() + smp_rmb() barrier
for those where it's not in order to fetch the data_head from the perf
control page, and it uses smp_store_release() to write the data_tail.
Latter is smp_mb() + WRITE_ONCE() combination or a cheaper variant if
architecture allows for it. Those that rely on smp_rmb() and smp_mb() can
further improve performance in a follow up step by implementing the two
under tools/arch/*/include/asm/barrier.h such that they don't have to
fallback to rmb() and mb() in tools/include/asm/barrier.h.
Switch perf to use ring_buffer_read_head() and ring_buffer_write_tail()
so it can make use of the optimizations. Later, we convert libbpf as
well to use the same helpers.
Side note [0]: the topic has been raised of whether one could simply use
the C11 gcc builtins [1] for the smp_load_acquire() and smp_store_release()
instead:
__atomic_load_n(ptr, __ATOMIC_ACQUIRE);
__atomic_store_n(ptr, val, __ATOMIC_RELEASE);
Kernel and (presumably) tooling shipped along with the kernel has a
minimum requirement of being able to build with gcc-4.6 and the latter
does not have C11 builtins. While generally the C11 memory models don't
align with the kernel's, the C11 load-acquire and store-release alone
/could/ suffice, however. Issue is that this is implementation dependent
on how the load-acquire and store-release is done by the compiler and
the mapping of supported compilers must align to be compatible with the
kernel's implementation, and thus needs to be verified/tracked on a
case by case basis whether they match (unless an architecture uses them
also from kernel side). The implementations for smp_load_acquire() and
smp_store_release() in this patch have been adapted from the kernel side
ones to have a concrete and compatible mapping in place.
[0] http://patchwork.ozlabs.org/patch/985422/
[1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:
b2f82565f2 ("powerpc: Wire up io_pgetevents")
Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.
This elliminated the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync KVM ABI additions and x86 CPU features additions - neither of which
has any impact on the tooling build.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This updates the tools/perf/ copy of the powerpc file used to generate
the syscall table file used to make 'perf trace' become aware of the new
'rseq' syscall, no matter in which system it gets built, i.e. older
systems where the syscalls are not available in the running kernel (via
tracefs) or in the system headers will still be aware of these
syscalls/.
From this commit:
bb862b021d ("powerpc: Wire up restartable sequences system call")
Silencing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-adtgz6u3apd76tghiu9w0k19@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for generating the syscall id/string translation table.
Committer notes:
Update it already to catch with these csets applied since Ravi first
submitted this patch:
3350eb2ea1 powerpc: sys_pkey_mprotect() system call
9499ec1b5e powerpc: sys_pkey_alloc() and sys_pkey_free() system calls
So now 'perf trace' on ppc now knows about the pkey_ syscals.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync the following tooling headers with the latest kernel version:
tools/arch/powerpc/include/uapi/asm/kvm.h
tools/arch/x86/include/asm/cpufeatures.h
tools/include/uapi/drm/i915_drm.h
tools/include/uapi/linux/if_link.h
tools/include/uapi/linux/kvm.h
All the changes are new ABI additions which don't impact their use
in existing tooling.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The changes in the 3214d01f13 ("KVM: PPC: Book3S: Provide information
about hardware/firmware CVE workarounds") commit right now will not
produce any change in the tools, but that is because we still need to
improve tools/perf/trace/beauty/kvm_ioctl.sh to build per arch string
tables, so that we avoid assigning multiple times to the same command
string entry, i.e. multiple defines, for different arches, have the same
value, causing this:
In file included from trace/beauty/ioctl.c:82:0:
/tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c: In function ‘ioctl__scnprintf_kvm_cmd’:
/tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:76:11: error: initialized field overwritten [-Werror=override-init]
/tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:88:11: note: (near initialization for ‘kvm_ioctl_cmds[165]’)
/tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c:90:11: error: initialized field overwritten [-Werror=override-init]
[0xa6] = "PPC_GET_SMMU_INFO",
^~~~~~~~~~~~~~~~~~~
So the onlye effect of updating the tools/ copy of ppc's kvm.h header
is to silence these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
At some point we should do what we did for the errno tables and create
per-arch string translation tables for the KVM ioctl commands for the
architectures supporting KVM, such as s/390, PowerPC, x86_64 and ARM.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jmcf78tqiudgn46zqfw2tgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each arch in tools/perf/arch, grab a copy of errno.h.
This is a pre-req to generate an architecture specific mapping of errno
numbers to their names. This errno mapping can be used by perf trace to
support cross-architecture trace reports and to get rid of the
audit-libs dependency.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-73azjhrzpjsskwi129020i2u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.
Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.
GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.
Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sync up (copy) the following v4.13 kernel headers to the tooling headers:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
- KVM ABI extensions, which do not affect perf tooling
arch/x86/include/asm/cpufeatures.h:
arch/x86/include/asm/disabled-features.h:
- New PCID CPU feature on Intel CPUs - does not affect tooling.
I.e. no real changes were needed to resolve the build warnings, just a plain copy
of the latest kernel header version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095232.4j4xigsoqwufl5hu@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync (copy) the following v4.12 kernel headers to the tooling headers:
arch/x86/include/asm/disabled-features.h:
arch/x86/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
- 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
fortunately none of the (in-kernel) tooling relied on it
- new KVM_DEV calls added
arch/x86/include/asm/required-features.h:
- 5-level paging hardware ABI detail added
arch/x86/include/asm/cpufeatures.h:
- new CPU feature added
arch/x86/include/uapi/asm/vmx.h:
- new VMX exit conditions
None of the changes requires fixes in the tooling source code.
This addresses the following warnings:
Warning: include/uapi/linux/stat.h differs from kernel
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/required-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The changes in the following csets are not relevant for what is used in
tools/perf/arch/powerpc/util/kvm-stat.c, but lets sync it to silence the
diff detector in the tools build system:
c927013227 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
17d48610ae ("KVM: PPC: Book 3S: XICS: Implement ICS P/Q states")
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following upstream headers were updated:
- The x86 cpufeatures.h file picked up a couple of new feature entries
- The PowerPC and ARM KVM headers picked up new features
None of which requires changes to perf tooling, so refresh the tooling copy.
Solves these build time warnings:
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170130081131.GA8322@gmail.com
[ resync tools/arch/x86/include/asm/cpufeatures.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some macros required by tools/perf/trace/beauty/mmap.c is not support
for all architectures. For example, MAP_32BIT is defined on x86 only,
alpha doesn't define MADV_HWPOISON and MADV_SOFT_OFFLINE.
This patch regenerates mman.h for each arch, defines these missing
macros for perf. For missing MADV_*, fall back to asm-generic/mman-common
because they are in a 'case ...' statement. For flags, define it to 0.
Following is the script to generate this patch:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
rm `find ./tools/arch/ -name mman.h`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h.tmp
real_target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
rm -f $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
touch $real_target
for m in $macros
do
if cat << EOF | gcc -Itools/arch/$arch/include -Itools/arch/$arch/include/uapi -Iinclude/ -Iinclude/uapi -E - | grep $m > /dev/null 2>&1
#include <uapi/asm/mman.h.tmp>
#include <uapi/linux/mman.h>
$m
EOF
then
echo "Fixing $m for $arch"
echo "/* $m is undefined on $arch, fix it for perf */" >> $target
if echo $m | grep '^MADV_' > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m include/uapi/asm-generic/mman-common.h | sed 's/[ \t]*\/\*.*$//g' >> $target
else
echo "#define $m 0" >> $target
fi
fi
done
real_target=tools/arch/$arch/include/uapi/asm/mman.h
echo '#ifndef '$guard > $real_target
echo '#define '$guard >> $real_target
cat $target | sed 's|asm-generic|uapi/asm-generic|g' >> $real_target
echo '#endif' >> $real_target
rm $target
echo "$real_target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_FREE
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 277cf08f3f ("perf trace beauty mmap: Fix defines for non !x86_64")
Link: http://lkml.kernel.org/r/1473850649-83389-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some mmap related macros have different values for different
architectures. This patch introduces uapi mman.h for each
architectures.
Three headers are cloned from kernel include to tools/include:
tools/include/uapi/asm-generic/mman-common.h
tools/include/uapi/asm-generic/mman.h
tools/include/uapi/linux/mman.h
The main part of this patch is generated by following script:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
echo '#ifndef '$guard > $target
echo '#define '$guard >> $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
echo '#endif' >> $target
echo "$target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1473684871-209320-2-git-send-email-wangnan0@huawei.com
[ Added new files to tools/perf/MANIFEST to fix the detached tarball build, add mman.h for ARC ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use it in bitops/__ffs.h and bitops/atomic.h, that we also got from
the kernel, but were getting it from either newer systems that carry it
in /usr/include, or from the kernel sources, that we decided not to
touch from tools/ code. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lwqvgbuitjmrdpjmjp6zqnyx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those kernel files were being directly accessed, which we're not
allowing anymore to avoid that changes in the kernel side break tooling.
Warn if these copies drift from the original files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Auger <eric.auger@linaro.org>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/n/tip-mnopguymhnwzjhw3mowllvsy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow the build to complete on older systems, where those files are
either not uptodate, lacking some recent additions or not present at
all.
And check if the copy drifts from the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sxf7rpow2blsno5f7t6n0sqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pk6f5x9vh8k2ebzhh9uj5wo2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo