Add xlate and unxlate around /dev/mem read/write. This sets up the mapping
that can be used for /dev/mem read and write without aliasing worries.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Earlier patch that introduced CONFIG_NONPROMISC_DEVMEM, did the
range_is_allowed() check only for read and write. Add range_is_allowed()
check to mmap of /dev/mem as well.
Changes the paramaters of range_is_allowed() to pfn and size to handle
more than 32 bits of physical address on 32 bit arch cleanly.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch introduces a restriction on /dev/mem: Only non-memory can be
read or written unless the newly introduced config option is set.
The X server needs access to /dev/mem for the PCI space, but it doesn't need
access to memory; both the file permissions and SELinux permissions of /dev/mem
just make X effectively super-super powerful. With the exception of the
BIOS area, there's just no valid app that uses /dev/mem on actual memory.
Other popular users of /dev/mem are rootkits and the like.
(note: mmap access of memory via /dev/mem was already not allowed since
a really long time)
People who want to use /dev/mem for kernel debugging can enable the config
option.
The restrictions of this patch have been in the Fedora and RHEL kernels for
at least 4 years without any problems.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
[PATCH] proc_readfd_common() race fix
[PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
[PATCH] teach seq_file to discard entries
[PATCH] umount_tree() will unhash everything itself
[PATCH] get rid of more nameidata passing in namespace.c
[PATCH] switch a bunch of LSM hooks from nameidata to path
[PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
[PATCH] move a bunch of declarations to fs/internal.h
Commit 884525655d ("PCI: clean up resource
alignment management") didn't set the alignment information for the
cardbus window resources, causing their subsequent allocations to fail
miserably with a message like
yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions
yenta_cardbus: probe of 0000:15:00.0 failed with error -16
or similar.
This fixes it and clarifies the code a bit too (we used to have to use
the insane PCI bridge alignment logic that put the alignment in the
"start" field, this makes it use the slightly easier-to-understand
size-based alignment, and allows us to set the resource start to zero
until it gets allocated).
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prevent bus_remove_device() from crashing if dev->knode_bus has not been
initialized before it's called.
This can happen if the device_add() ended up breaking out early due to
an error, for example.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not refuse to actually register children of suspended devices,
but still warn about attempts to do that.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only reason to have separated __...() for those was to keep them inlined
for local users in exit.c. Since Alexey removed the inline on those, there's
no reason whatsoever to keep them around; just collapse with normal variants.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since we drop the rcu_read_lock inside the loop, we can't assume
that files->fdt will remain unchanged (and not freed) between
iterations.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] run drivers/misc/sgi-xp through scripts/checkpatch.pl
[IA64] run rest drivers/misc/sgi-xp through scripts/Lindent
[IA64] run some drivers/misc/sgi-xp through scripts/Lindent
[IA64] move XP and XPC to drivers/misc/sgi-xp
[IA64] minor irq handler cleanups
[IA64] simplify notify hooks in mca.c
[IA64] do notify DIE_MCA_MONARCH_PROCESS for each monarchs
[IA64] disable interrupts on exit of ia64_trace_syscall
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
SELinux fixups needed for preemptable RCU from -rt
SELinux: no BUG_ON(!ss_initialized) in selinux_clone_mnt_opts
Addressed issues raised by scripts/checkpatch.pl. Removed unnecessary curly
braces. Eliminated uses of volatiles and use of kernel_thread() and daemonize().
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Fix platform driver hotplug/coldplug
i2c: New driver for the SuperH Mobile I2C bus controller
i2c/scx200_acb: Don't use 0 as NULL pointer
i2c-bfin-twi: Fix mismatch in add timer and delete timer
i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN
i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information
i2c-bfin-twi: Add missing pin mux operation
i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation
i2c: Remove trailing whitespaces in busses/Kconfig
i2c: Replace remaining __FUNCTION__ occurrences
i2c: Renesas SH7760 I2C master driver
i2c-dev: Split i2cdev_ioctl
i2c-ibm_iic: Support building as an of_platform driver
i2c-ibm_iic: Change the log levels
i2c: Add platform driver on top of the new pca-algorithm
i2c-algo-pca: Extend for future drivers
i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
i2c: Remove the algorithm drivers from the config menu
Add missing kernel-doc in kernel/sched.c:
Warning(linux-2.6.25-git3//kernel/sched.c:7044): No description found for parameter 'span'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
dlm: common max length definitions
dlm: move plock code from gfs2
dlm: recover nodes that are removed and re-added
dlm: save master info after failed no-queue request
dlm: make dlm_print_rsb() static
dlm: match signedness between dlm_config_info and cluster_set
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Suppress hidinput for Samsung IR control
HID: remove 60x GTCO devices from blacklist
HID: export headers properly
HID: WiseGroup 866 Dual Joypad needs output reports quirk
HID: ThrustMaster FF driver is no longer experimental
HID: Logitech diNovo Mini pad support
HID: fix race between open() and disconnect() in usbhid
HID: make hid_input_field and usbhid_modify_dquirk static
HID: pass numbered reports properly to hidraw
HID: fix misplaced rdesc quirk
HID: force feedback driver for Logitech Rumblepad 2
HID: move wait from hid to usbhid
HID: make function from dbg_hid
HID: fix sparse warnings
HID: only dump report traffic with debug level 2
HID: patch to add NOGET for DMI/Acomdata
HID: Sunplus Wireless Desktop needs report descriptor fixup
HID: quirk for MS Wireless Desktop Receiver (model 1028)
HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd
HID: fix build failure in hiddev_ioctl with gcc 3.2
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: (41 commits)
udf: use crc_itu_t from lib instead of udf_crc
udf: Fix compilation warnings when UDF debug is on
udf: Fix bug in VAT mapping code
udf: Add read-only support for 2.50 UDF media
udf: Fix handling of multisession media
udf: Mount filesystem read-only if it has pseudooverwrite partition
udf: Handle VAT packed inside inode properly
udf: Allow loading of VAT inode
udf: Fix detection of VAT version
udf: Silence warning about accesses beyond end of device
udf: Improve anchor block detection
udf: Cleanup anchor block detection.
udf: Move processing of virtual partitions
udf: Move filling of partition descriptor info into a separate function
udf: Improve error recovery on mount
udf: Cleanup volume descriptor sequence processing
udf: fix anchor point detection
udf: Remove declarations of arrays of size UDF_NAME_LEN (256 bytes)
udf: Remove checking of existence of filename in udf_add_entry()
udf: Mark udf_process_sequence() as noinline
...
While looking at the implementation of the Ram backed block device
driver, I stumbled across a write-only local variable, which makes
little sense, so I assume it should actually work like this:
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since 43cc71eed1, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable I2C platform drivers, to allow module auto loading.
[ db: add some more drivers ]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master
only driver for the I2C block included in processors such as sh7343,
sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Simply use "depends on BLACKFIN" (which is technically correct) and just
document which machines have the device.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Blackfin TWI controller hardware pin should be requested from GPIO port controller
Before BF54x, there is no need to do this. But as long as BF54x and BF52x
are supported by this generic driver, the missing pin mux operation should be
added.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
- Dynamic alloc the resource of TWI driver data according to board information
- TWI register read/write accessor based on dynamic regs_base
- Support TWI0/TWI1 for BF54x
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
- Create a new mode TWI_I2C_MODE_REPEAT.
- No change to smbus operation.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
__FUNCTION__ is gcc-specific, use __func__.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Driver for I2C interfaces in master mode on SH7760.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Split the handling of the I2C_RDWR and I2C_SMBUS ioctls to their own
functions. This limits the stack usage, saves one level of indentation
and makes the code more readable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This patch allows the i2c-ibm_iic driver to be built either as an ocp
driver or an of_platform driver. This allows it to run under the powerpc
arch but maintains backward compatibility with the ppc arch.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Change the log levels based on feedback from linxppc-dev.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.
Concerning the core struct i2c_algo_pca_data:
- A private data field was added, all hardware dependant data may go here.
Similar to other algorithms, now a pointer to this data is passed to the
adapter's functions. In order to make as less changes as possible to the
ISA-driver, it leaves the private data empty and still only uses its static
variables.
- A "reset_chip" function pointer was added; such a functionality must come
from the adapter, not the algorithm.
- use a variable "i2c_clock" instead of a function pointer "get_clock",
allowing for write access to a default in case a wrong value was supplied.
In the algorithm-file:
- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused
(The state-machine for I2C-communication was not touched.)
In the ISA-driver:
- adapt to new algorithm
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Remove trailing whitespaces to make further patches more readable. Also remove
an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough).
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The algorithm drivers are helper drivers that are selected automatically
as needed. There's no point in listing them in the config menu, it can
only confuse users and waste their time.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
- remove unused 'irq' argument from pfm_do_interrupt_handler()
- remove pointless cast to void*
- add KERN_xxx prefix to printk()
- remove braces around singleton C statement
- in tioce_provider.c, start tioce_dma_consistent() and
tioce_error_intr_handler() function declarations in column 0
This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
There are many notify_die() and almost all take same style with
ia64_mca_spin(). This patch defines macros and replace them all,
to reduce lines and to improve readability.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
There are 3 hooks in MCA handler, but this DIE_MCA_MONARCH_PROCESS
event does not notified other than for the first monarch.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
While testing with CONFIG_VIRT_CPU_ACCOUNTING=y, I found that
I occasionally get very huge system time in some threads.
So I dug the issue and finally noticed that it was caused
because of an interrupt which interrupt in the following window:
> [arch/ia64/kernel/entry.S: (!CONFIG_PREEMPT && CONFIG_VIRT_CPU_ACCOUNTING)]
>
> ENTRY(ia64_leave_syscall)
> :
> (pUStk) rsm psr.i
> cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
> (pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
> .work_processed_syscall:
> adds r2=PT(LOADRS)+16,r12
> (pUStk) mov.m r22=ar.itc // fetch time at leave
> adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
> ;;
> <<< window: from here >>>
> (p6) ld4 r31=[r18] // load current_thread_info()->flags
> ld8 r19=[r2],PT(B6)-PT(LOADRS)
> adds r3=PT(AR_BSPSTORE)+16,r12
> ;;
> mov r16=ar.bsp
> ld8 r18=[r2],PT(R9)-PT(B6)
> (p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
> ;;
> ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)
> (p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
> (p6) br.cond.spnt .work_pending_syscall
> ;;
> ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
> ld8 r11=[r3],PT(CR_IIP)-PT(R11)
> (pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
> ;;
> invala
> <<< window: to here >>>
> rsm psr.i | psr.ic // turn off interrupts and interruption collection
If pUStk is true, it means we are going to return user mode, hence we fetch
ar.itc to get time at leave from system.
It seems that it is not possible to interrupt the window if pUStk is true,
because interrupts are disabled early. And also disabling interrupt makes
sense because it is safe for referring current_thread_info()->flags.
However interrupting the window while pUStk is true was possible.
The route was:
ia64_trace_syscall
-> .work_pending_syscall_end
-> .work_processed_syscall
Only in case entering the window from this route, interrupts are enabled
during in the window even if pUStk is true. I suppose interrupts must be
disabled here anyway if pUStk is true.
I'm not sure but afraid that what kind of bad effect were there, other
than crazy system time which I found.
FYI, there was a commit 6f6d75825d that
points out a bug at same point(exit of ia64_trace_syscall) in 2006.
It can be said that there was an another bug.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Samsung USB remotes (0419:0001) report six keys via standard HID usage pages
(arrow keys, OK, Power). Kernel 2.6.25 maps those to input events (in addition
to the hiddev report). The remaining 43 keys are reported via proprietary HID
report page and therefore by hiddev only.
Applications using hiddev and input device might process the 6 standard keys
twice. To avoid this, the input device will be suppressed for the Samsung
remote with a quirk entry, forcing to use the hiddev device only.
LIRC already contains the proper support.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jeremy Robertson reports that GTCO engineers made a mistake and we don't
need 0x60x GTCO product ids blacklisted.
This mostly reverts dda3fd35, but leaves PID 0x1007 intact.
Reported-by: Jeremy Roberson <jeremy.roberson@einstruction.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I have people whining about using these headers in userspace, and they have
__KERNEL__ markings which implies they're supposed to be exported. I also
added the required linux/types.h include to hidraw.h since it uses the __u##
kernel types.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
venkatesh.pallipadi@intel.com