btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've avoided data losing raid profile when doing balance, but it
turns out that deleting a device could also result in the same
problem.
Say we have 3 disks, and they're created with '-d raid1' profile.
- We have chunk P (the only data chunk on the empty btrfs).
- Suppose that chunk P's two raid1 copies reside in disk A and disk B.
- Now, 'btrfs device remove disk B'
btrfs_rm_device()
-> btrfs_shrink_device()
-> btrfs_relocate_chunk() #relocate any chunk on disk B
to other places.
- Chunk P will be removed and a new chunk will be created to hold
those data, but as chunk P is the only one holding raid1 profile,
after it goes away, the new chunk will be created as single profile
which is our default profile.
This fixes the problem by creating an empty data chunk before
relocating the data chunk.
Metadata/System chunk are supposed to have non-zero bytes all the time
so their raid profile is preserved.
Reported-by: James Alandt <James.Alandt@wdc.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a fallocate's zero range operation that targets a range with an end
that is not aligned to the sector size, we can end up not updating the
inode's i_size. This happens when the last page of the range maps to an
unwritten (prealloc) extent and before that last page we have either a
hole or a written extent. This is because in this scenario we relied
on a call to btrfs_prealloc_file_range() to update the inode's i_size,
however it can only update the i_size to the "down aligned" end of the
range.
Example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ xfs_io -f -c "pwrite -S 0xff 0 428K" /mnt/foobar
$ xfs_io -c "falloc -k 428K 4K" /mnt/foobar
$ xfs_io -c "fzero 0 430K" /mnt/foobar
$ du --bytes /mnt/foobar
438272 /mnt/foobar
The inode's i_size was left as 428Kb (438272 bytes) when it should have
been updated to 430Kb (440320 bytes).
Fix this by always updating the inode's i_size explicitly after zeroing
the range.
Fixes: ba6d5887946ff86d93dc ("Btrfs: add support for fallocate's zero range operation")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a buffered IO write, we can have an extent state that we got when
we locked the range (if the range starts at an offset lower than eof), so
always pass it to btrfs_dirty_pages() so that setting the delalloc bit
in the range does not need to do a full search in the inode's io tree,
saving time and reducing the amount of time we hold the io tree's lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This implements support the zero range operation of fallocate. For now
at least it's as simple as possible while reusing most of the existing
fallocate and hole punching infrastructure.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since fail stripe index in rbio would be used to decide which
algorithm reconstruction would be run, we cannot merge rbios if
their's fail striped indexes are different, otherwise, one of the two
reconstructions would fail.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Given the above
'
if (last->operation != cur->operation)
return 0;
',
it's guaranteed that two operations are same.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Assign ret = -EINVAL where it is actually required.
Remove { } around single line if else code.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_device::scrub_device is not a device which is being scrubbed,
but it holds the scrub context, so rename to reflect the same. No
functional changes here.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no other consumer for btrfs_handle_error() other than
__btrfs_handle_fs_error(), further this function quite small.
Merge it into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls
btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR
is set in btrfs_handle_error(). And there is no other user of
btrfs_handle_error() as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.
This extends btrfs to do more retries and each retry fails only one
stripe. Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.
The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.
We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.
[1]: https://patchwork.kernel.org/patch/10091755/
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_check_rw_degradable() to check against the given device if
its lost.
We can use this function to know if the volume is going to be in
degraded mode OR failed state, when the given device fails. Which is
needed when we are handling the device failed state.
A preparatory patch does not affect the flow as such.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ enhance comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>
Recent patches reworking the mount path left some unused parameters. We
pass a vfsmount to mount_subvol, the flags and data (ie. mount options)
have been already applied and we will not need them.
Signed-off-by: David Sterba <dsterba@suse.com>
Long ago, commit edf24abe51 ("btrfs: sanity mount option parsing and
early mount code") split the btrfs_parse_options() into two parts
(btrfs_parse_early_options() and btrfs_parse_options()). As a result,
btrfs_parse_optins no longer gets called twice and is the last one to
parse mount option string. Therefore there is no need to dup it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is not referenced after it has been submitted and the endio is
going to consume the sole reference on successful submission. On error,
the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't
leak it either.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is never referenced after it has been submitted so there is no
point in getting an extra reference.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio that is passsed is the newly created repair bio which already
has a reference count of 1, which is going to be consumed by the
endio routine on successful submission. On error the handler also
calls bio_put.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_get/set is necessary only if the bio is going to be referenced
following submissions. In the code paths where such calls are made
we don't really need them since the bio is referenced only if
btrfs_map_bio returns an error. And this function can return an error
prior to submission only. So referencing the bio is safe. Furthermore
we do call bio_endio which will consume the last reference. So let's
remove the redundant calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As it's a single instance and local to the file, we don't need to pass
it as an argument.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it and also make the array types explicit.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove unused arg 'holder' from parse_subvol_options(), which has been
forgotten to be cleaned in the commit b99beb110e2d ("btrfs: split
parse_early_options() in two").
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since setup_root_args() is not used anymore, just remove it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now parse_early_options() is used by both btrfs_mount() and
btrfs_mount_root(). However, the former only needs subvol related part
and the latter needs the others.
Therefore extract the subvol related parts from parse_early_options() and
move it to new parse function (parse_subvol_options()).
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup btrfs_mount() by using btrfs_mount_root(). This avoids getting
btrfs_mount() called twice in mount path.
Old btrfs_mount() will do:
0. VFS layer calls vfs_kern_mount() with registered file_system_type
(for btrfs, btrfs_fs_type). btrfs_mount() is called on the way.
1. btrfs_parse_early_options() parses "subvolid=" mount option and set the
value to subvol_objectid. Otherwise, subvol_objectid has the initial
value of 0
2. check subvol_objectid is 5 or not. Assume this time id is not 5, then
btrfs_mount() returns by calling mount_subvol()
3. In mount_subvol(), original mount options are modified to contain
"subvolid=0" in setup_root_args(). Then, vfs_kern_mount() is called with
btrfs_fs_type and new options
4. btrfs_mount() is called again
5. btrfs_parse_early_options() parses "subvolid=0" and set 5 (instead of 0)
to subvol_objectid
6. check subvol_objectid is 5 or not. This time id is 5 and mount_subvol()
is not called. btrfs_mount() finishes mounting a root
7. (in mount_subvol()) with using a return vale of vfs_kern_mount(), it
calls mount_subtree()
8. return subvolume's dentry
Reusing the same file_system_type (and btrfs_mount()) for vfs_kern_mount()
is the cause of complication.
Instead, new btrfs_mount() will do:
1. parse subvol id related options for later use in mount_subvol()
2. mount device's root by calling vfs_kern_mount() with
btrfs_root_fs_type, which is not registered to VFS by
register_filesystem(). As a result, btrfs_mount_root() is called
3. return by calling mount_subvol()
The code of 2. is moved from the first part of mount_subvol().
The semantics of device holder changes from btrfs_fs_type to
btrfs_root_fs_type and has to be used in all contexts. Otherwise we'd
get wrong results when mount and dev scan would not check the same
thing. (this has been found indendently and the fix is folded into this
patch)
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ fold the btrfs_control_ioctl fixup, extend the comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add btrfs_mount_root() and new file_system_type for preparation of cleanup
of btrfs_mount(). Code path is not changed yet.
btrfs_mount_root() is almost the same as current btrfs_mount(), but doesn't
have subvolume related part.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions called from extent_write_cache_pages used void* as generic
callback data, but all of them convert it to extent_page_data, or use it
directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_write_cache_pages is modelled after
write_cache_pages which is a generic interface and the writepage
parameter makes sense there. In btrfs we know exactly which callback
we're going to use, so we can pass it directly.
Signed-off-by: David Sterba <dsterba@suse.com>
flush_epd_write_bio is same as flush_write_bio, no point having two such
functions. Merge them to flush_write_bio. The 'noinline' attribute is
removed as it does not have any meaning.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are 2 function doing binary search on btrfs nodes:
bin_search and btrfs_bin_search. The latter being a simple wrapper for
the former. So eliminate the wrapper and just rename bin_search to
btrfs_bin_search. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree argument passed to extent_write_full_page is referenced from
the page being passed to the same function. Since we already have
enough information to get the reference, remove the function parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is called only from submit_compressed_extents and the
io tree being passed is always that of the inode. But we are also
passing the inode, so just move getting the io tree pointer in
extent_write_locked_range to simplify the signature.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code was added in 492bb6deee ("Btrfs: Hold a reference on bios
during submit_bio, add some extra bio checks"). However, holding a
reference on a bio is necessary only if it's going to be referenced
after the submit_bio returns and the bio is completed. In this
particular instance this is not the case so there is no need to hold
an extra reference since we directly return.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.
Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function was introduced by 247e743cbe ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just a code spatial rearrangement, no functional change.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places opencoding this conversion, add a helper now
that we have 3 compression algorithms.
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain