This commit enables ALSA dice driver to handle whole available streams.
In Dice, certain registers represent the number of available streams at
current sampling transfer frequency for both directions. The parameters
of each stream are represented in a block of register. This block is
aligned sequentially. These streams start simultaneously by writing
enable bit to a register.
This commit operates these registers when starting/stopping streams.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently ALSA dice driver handles a pair of isochronous resources for
IEC 61883-1/6 packet streaming. While, according to some documents about
ASICs named as 'Dice', several isochronous streams are available.
Here, I start to describe ASICs produced under 'Dice' name.
* Dice II (designed by wavefront semiconductor, including TCAT's IP)
* STD (with limited functionality of DTCP)
* CP (with full functionality of DTCP)
* TCD2210/2210-E (so-called 'Dice Mini')
* TCD2220/2220-E (so-called 'Dice Jr.')
* TCD3070-CH (so-called 'Dice III')
Some documents are public and we can see hardware design of them. We can
find some articles about hardware internal register definitions
(not registers exported to IEEE 1394 bus).
* DICE II User Guide
* http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf
* 6.1 AVS Audio Receivers
* Table 6.1: AVS Audio Receiver Memory Map
* ARX1-ARX4
* 6.2 AVS Audio Transmitters
* Table 6.2: AVS Audio Transmitter Memory Map
* ATX1, ATX2
* TCD22xx User Guide
* http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf
* 6.1 AVS Audio Receivers
* Table 66: AVS Audio Receiver Memory Map
* ARX1, ARX2
* 6/2 AVS Audio Transmitters
* Table 67: AVS Audio Transmitter Memory Map
* ATX1, ATX2
* DICE III
* http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf
* Dual stream 63 channel transmitter/receiver
For Dice II and TCD22xx series, maximum 16 data channels are transferred in
an AMDTP packet, while for Dice III, maximum 32 data channels are
transferred.
According to the design of the series of these ASICs, this commit allows
this driver to handle additional set of isochronous resources. For
practical reason, two pair of isochronous resources are added. As of this
commit, this driver still use a pair of the first isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.
Build tested successfully with allmodconfig.
The following Coccinelle SmPL patch was used for this simple
transformation:
@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@
-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)
@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@
-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)
@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@
-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)
We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.
Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce PCI_VENDOR/PCI_SUBVENDOR/PCI_SUBDEVICE defines to replace the
constants scattered in the kernel already used to detect QEMU.
They are defined in the QEMU codebase per docs/specs/pci-ids.txt.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
rawmidi devices expose the card number via IOCTLs, which allows to
find the corresponding device in sysfs.
The sequencer provides no identifing data. Chromium works around this
issue by scanning rawmidi as well as sequencer devices and matching
them by using assumtions, how the kernel register sequencer devices.
This changes adds support for exposing the card number for kernel clients
as well as the PID for user client.
The minor of the API version is changed to distinguish between the zero
initialised reserved field and card number 0.
[minor coding style fixes by tiwai]
Signed-off-by: Martin Koegler <martin.koegler@chello.at>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio driver has a mechanism to trigger the runtime resume
automatically at accessing the verbs. This auto-resume, however,
causes the mutex deadlock when invoked from the regmap handler since
the regmap keeps the mutex while auto-resuming. For avoiding that,
there is some tricky check in the HDA regmap handler to return -EAGAIN
error to back-off when the codec is powered down. Then the caller of
regmap r/w will retry after properly turning on the codec power.
This works in most cases, but there seems a slight race between the
codec power check and the actual on-demand auto-resume trigger. This
resulted in the lockdep splat, eventually leading to a real deadlock.
This patch tries to address the race window by getting the runtime PM
refcount at the check time using pm_runtime_get_if_in_use(). With
this call, we can keep the power on only when the codec has been
already turned on, and back off if not.
For keeping the code consistency, the code touching the runtime PM is
stored in hdac_device.c although it's used only locally in
hdac_regmap.c.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We are getting build warning about:
sound/soc/codecs/rt5640.c:1892:11: warning: unused variable 'dai_sel'
The use of the variable was removed but the variable itself was not
removed.
Fixes: c467fc0e01 ("ASoC: rt5640: Set PLL src according to source")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Chmap helper arguments are modified to use either hdac_device
object or hdac_chmap object instead of codec specific object.
With this moving these APIs to core will be easier.
Helper added to access a specific channel_allocation object
instead of directly accessing.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add slot and channel count programming to hdmi_chmap object and
move the chmap_ops to core. Use register_chmap_ops API to
register for default ops. Override specific chmap ops in the
driver.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With this chmap object is added as private data and new ops are
added to access driver specific chmap.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
chmap object represents multichannel capability and contains chmap
ops. Legacy driver is updated to use this.
With next set of patches chmap object is moved to common to be
reused by other drivers (ex: skylake ASoC hdmi driver).
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places. They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.
The other changes are:
- A fix for Qualcomm devices to work on big endian systems. The
original change is actually correct but triggered a bug in regmap
which is too invasive to fix for this cycle and can be worked around
by just letting regmap pick the default.
- A fix for the Samsung I2S driver locking which wasn't using IRQ safe
spinlocks when it needed to.
- A fix for the new Intel Sky Lake driver forgetting that C pointer
arithmetic takes the type of the pointer into consideration.
- A revert of a change to the FSL SSI driver that broke some systems.
- A fix for the cleanup path of the wm9713 driver.
- A fix for some incorrect register definitions in the ADAU17x1 driver
that caused misclocking in some configurations.
- A fix for the tracepoints for jack detection to avoid using an
internal field of the core jack structure which is no longer present
in all configurations.
- A fix for another of the new Intel drivers which tried to write to a
string literal.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW3OpsAAoJECTWi3JdVIfQ/lMH/05/atIZLFI3tfxpp9P1zCD2
6BH6aUtGEz8uh7wpfLlgUKvBhFZxZmr2aYHiuD2c2UQYWJ5L14GavkUvrohQ1oBp
6LGN2pJ/0uhQ6XnFHcYnJt5C3pdQspNxaNZBCTdLQZDjjki13Q8jXVL2vToFFbpK
vFEHLqeuwtSLgtgNJMHHLR6o5QpfX7lcMGKwsfNI8k5b+2j5UDh+fwGQcnU9wueU
FyxIy9FNlHd1nWwQDNyGL06pMKazsPV6KaPDXa/rG6RsOBxpjz+5JgCVKmAh7EUp
/qUS2Xy0DVTkedtunnA9EIIHyfC1zuFjeH6lU2UyP/A2kcMlzpNyt7uMRK0dolg=
=+Y7p
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.5
This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places. They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.
The other changes are:
- A fix for Qualcomm devices to work on big endian systems. The
original change is actually correct but triggered a bug in regmap
which is too invasive to fix for this cycle and can be worked around
by just letting regmap pick the default.
- A fix for the Samsung I2S driver locking which wasn't using IRQ safe
spinlocks when it needed to.
- A fix for the new Intel Sky Lake driver forgetting that C pointer
arithmetic takes the type of the pointer into consideration.
- A revert of a change to the FSL SSI driver that broke some systems.
- A fix for the cleanup path of the wm9713 driver.
- A fix for some incorrect register definitions in the ADAU17x1 driver
that caused misclocking in some configurations.
- A fix for the tracepoints for jack detection to avoid using an
internal field of the core jack structure which is no longer present
in all configurations.
- A fix for another of the new Intel drivers which tried to write to a
string literal.
CMD.out should use same as SRC.out for TIMSEL settings,
but it cares Playback case only. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC has Sync/Async mode, and it can't use Sync mode when Capture
with CMD. In Async mode, it needs to care about in/out SRC rate
for settings, but current driver supporting Playback case only.
This patch supports Capture case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC will convert rate, and then, CMD and SSI want to know its
rate (= SRC.in / SRC.out) for each purpose.
Current driver is supporting only Playback, but SRC+Capture support
needs more flexibility.
This patch adds rsnd_src_get_in/out_rate() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_enable_sync_convert() is for checking, not for setting.
In order to avoid confusion, this patch renamed it to
rsnd_src_sync_is_enabled()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To reduce confusion, SRC uses "mod" instead of "src"
as function parameter
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC sync mode needs to control its clock (= for in/out). 1st but codec
side clock
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can't use SRC Synchronous convert when Capture if it uses CMD,
because no one provide out side clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAC1/2 power is for both DACs and related mixer/mux. Add SUPPLY
type widgets to support it.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5640_set_dai_pll set pll source according to given source and
dai id. However, the pll source should be set according to given
source only.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes coccicheck report:
Unneeded variable: "ret". Return "0" on line 2817
Remove unneccesary variable ret created to return zero.
Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the necessary device tree compatible string to allow DT
probing.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
This should be more robust to future changes than adressing
array entries by index number.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds CTU (= Channel Transfer Unit) support on
Renesas R-Car sound driver.
It can Down/Up mixing and splitter. You need to check R-Car datasheet
especially CTUn_CPMDR/CTUn_SV0xR/CTUn_SV1xR/CTUn_SV2xR/CTUn_SV3xR
for setting parameter.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SSI is supporting Normal SSI/Multi mode SSI/TDM mode SSI
and its behavior is based on input channels.
This input channel might be converted by CTU,
and SSI needs to be Multi SSI mode / TDM SSI mode if 6ch input
EX) 6ch input, CTU for 2ch, playback
6ch 6ch 2ch 2ch 2ch 2ch
-> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI
EX) 6ch input, no CTU, Multi SSI, playback
6ch 6ch 6ch 6ch 6ch 2ch
-> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI0/SSI1/SSI2
Current driver is using rsnd_get_adinr_chan() / rsnd_get_slot_width()
for this purpose, but it is complicated enough without meaning.
This patch adds new rsnd_runtime_channel_xxx() which is caring
CTU/Multi SSI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Renesas R-Car sound CTU (= Channel Transfer Unit)
very basic support, but not yet enough feature at this point.
Because CTU support needs more complex channel function for
each modules.
To avoid complex patch reviewing, this patch picked up very basic
part only.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound device has CTU (= Channel Transfer Unit), and
sound card needs its support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some CHT-T platforms make use of the Realtek RT5640 codec. Make use
of the machine driver developed for Baytrail.
Tested on Tronsmart Ara X5.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hard-coded generation of codec name, use translation routine
to avoid issues with codec name not matching what the ACPI subsystem
registered
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BIOS vendors sometimes declare multiple devices in the DSDT
table that all refer to the same HID. This is not very smart
but not illegal as long as only one device reports present with
the _STA method. The ACPI subsystem tracks each device with an
extension, e.g. 10EC5640:00 and 10EC5640:01
In the ASoC machine driver, the DAI codec name needs to refer to the
ACPI device that reported present, e.g. "i2c-10EC5640:01". The
extension will vary depending on how the BIOS is written and which
ACPI device is activated.
This patch adds a translation function that provides the codec
name from the ACPI HID to avoid any hard-coded values in the
machine driver.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BIOS vendors typically list multiple audio codecs in the DSDT
table and enable the relevant one by changing the return value
of the _STA method.
With the current code, all devices are reported by
acpi_dev_present(), regardless of the _STA return values. This
causes errors on probe with the wrong machine driver being loaded.
This patch essentially reverts 'commit 6f08cbdaac
("ASoC: Intel: Use acpi_dev_present()")' and adds code to
force the evaluation of the _STA method.
A better solution might be to make sure the ACPI subsystem only
reports devices with a _STA value of 0xf but apparently it's
problematic so dealing with this in the audio subsystem directly.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch add compatible for rk3366/rk3368/rk3399 spdif,
these three spdifs share the same type.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While building we were getting build warning about:
sound/soc/codecs/pcm3168a.c:403:21: warning: variable 'channels' set but
not used
The variable channels were being assigned some value but that was never
reused.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rockchip spdif driver uses SIMPLE_DEV_PM_OPS to conditionally
set its power management functions, but we get a warning
about rk_spdif_runtime_resume being unused when CONFIG_PM is not
set:
sound/soc/rockchip/rockchip_spdif.c:67:12: error: 'rk_spdif_runtime_resume' defined but not used [-Werror=unused-function]
This adds a __maybe_unused annotation so the compiler knows
it can silently drop it instead of warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes that hasn't built the rt5616 driver with
'CONFIG_SND_SOC_RT5616=y' in .config.
The tristate is the prompt on the 'make menuconfig',
in other words, that can't show the prompt and select it
if we don't say what's the tristate.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
More inspection of code revealed few more typos so fix them as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stream states were explained in the code comments but
SNDRV_PCM_STATE_PREPARED was missed so add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow writes in SNDRV_PCM_STATE_PREPARED state so that more
than one buffer fragment can be written from user space
before calling SNDRV_COMPRESS_START.
Signed-off-by: Eric Laurent <elaurent@google.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Defer to register acomp eld notifier until hdmi audio driver
is fully ready.
After registering eld notifier, gfx driver can use this
callback function to notify audio driver the monitor
connection event. However this action may happen when
audio driver is adding the pins or doing other initialization.
This is not always safe, however. For example, using
per_pin->lock before the lock is initialized.
Let's register the eld notifier after the initialization is done.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make sure audio_ptr is set before intel_audio_codec_enable()
or intel_audio_codec_disable() calling pin_eld_notify(),
this patch adds wmb barrier to prevent optimizing.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change ALSA driver to use Media Controller API to share media resources
with DVB and V4L2 drivers on a AU0828 media device. Media Controller
specific initialization is done after sound card is registered. ALSA
creates Media interface and entity function graph nodes for Control,
Mixer, PCM Playback, and PCM Capture devices.
snd_usb_hw_params() will call Media Controller enable source handler
interface to request the media resource. If resource request is
granted, it will release it from snd_usb_hw_free(). If resource is
busy, -EBUSY is returned.
Media specific cleanup is done in usb_audio_disconnect().
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.
This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <simon@simonsouth.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While registering pardev, the irq_func was also registered. As a result
when we tried to probe for the card, an interrupt was generated and in
the ISR we tried to dereference private_data. But private_data is still
NULL as we have not yet done portman_create(). Lets probe for the device
after card is created.
Fixes: e6a1b7e880 ("ALSA: portman2x4 - use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cpu_dai id always equals 0, can't distinguish the
different SSC. Use platform_device id to record
and distinguish the different SSC.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the DPCM based machine driver with rt5650 and rt5514.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some R-Car sound requests picky register access which needs *force*
register write.
Some status register needs to set 1 to clear status, but we might
read 1 from its register. In such case, current regmap does nothing
and driver will be forever loop
To reduce code complexity, this patch uses regmap _force_
function for all register access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The IVI loop is removed in skl_nau88l25_ssm4567 machine as we
enable this path thru DAPM graph using the PCM device and not
thru loop
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We can enable the IVI feedback path by connecting Left/Right
speaker sensors (codec) to ssp0 Rx (soc-dsp). This way aDSP gets
feedback data from codec to DSP algorithms
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The blob query for BE skl_tplg_update_be_blob() was not using
right values for direction for blob query, so fix that.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The OSS sequencer client tries to drain the pending events at
releasing. Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future. Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.
Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.
This patch just removes the draining call that may block the release
for too long time unexpectedly.
BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hdmi_find_pcm_slot return -EBUSY when not no pcm slot found,
not -ENODEV. So the caller should compare with -EBUSY.
Fixes: a76056f2e5 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The firmware ctls like "DSP1 Firmware" in wm_adsp codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
"Speaker Mode "ctl in wm9081 codec driver is enum, while the current
driver accesses wrongly via value.integer.value[]. They have to be
via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"DSP1 EQ Mode" and "DSP2 EQ Mode" ctls in wm8996 codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in
wm8994 codec driver are enum ctls, while the current driver accesses
wrongly via value.integer.value[]. They have to be via
value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
"Equalizer Function" ctl in wm8985 codec driver is enum, while the
current driver accesses wrongly via value.integer.value[]. They have
to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Equalizer Function" ctl in wm8983 codec driver is enum, while the
current driver accesses wrongly via value.integer.value[]. They have
to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in
wm8958 codec driver are enum, while the current driver accesses
wrongly via value.integer.value[]. They have to be via
value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
"DRC Mode" and "EQ Mode" ctls in wm8904 codec driver are enum, while
the current driver accesses wrongly via value.integer.value[]. They
have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"DAI Mode" ctl in wm8753 codec driver is enum, while the current
driver accesses wrongly via value.integer.value[]. They have to be
via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Codec Mode" and "Audio Switch" ctls in wl1273 codec driver are enum,
while the current driver accesses wrongly via value.integer.value[].
They have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"FIFO Mode" ctl in tlv320dac33 codec driver is enum, while the current
driver accesses wrongly via value.integer.value[]. They have to be
via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Biquad1 Mode" and "Biquad2 Mode" ctls in max98095 codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"EQ1 Mode" and "EQ2 Mode" ctls in max98088 codec driver are enum,
while the current driver accesses wrongly via value.integer.value[].
They have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Sidetone Status" and "ANC Status" ctls in ab8500 codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"DAC1 High Pass Filter Mode" & co in da732x codec driver are enum,
while the current driver accesses wrongly via value.integer.value[].
They have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"PCM channel mixer" ctl in cs42l51 codec driver is enum, while the
current driver accesses wrongly via value.integer.value[]. They have
to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Playback Switch" and "Lineout Mux" ctls in medfld machine driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Speaker Function", "Input Select" and "Jack Function" ctls in rx51
driver are enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Jack Function", "Speaker Function" and "Input Select" ctls in n810
driver are enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Jack Function" and "Speaker Function" ctls in tosa are enum, while
the current driver accesses wrongly via value.integer.value[]. They
have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Jack Function" and "Speaker Function" ctls in spitz are enum, while
the current driver accesses wrongly via value.integer.value[]. They
have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Jack Function" and "Speaker Function" ctls in poodle are enum, while
the current driver accesses wrongly via value.integer.value[]. They
have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Input Select" ctl in magician driver is an enum, while the current
driver accesses wrongly via value.integer.value[]. They have to be
via value.enumerated.item[] instead.
(Meanwhile "Headphone Switch" and "Speaker Switch" are boolean, so
they should stay to access via value.integer.value[] as is.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Jack Function" and "Speaker Function" ctls in corgi are enum, while
the current driver accesses wrongly via value.integer.value[]. They
have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_dai_link_get() and _put() access the associated ctl
values as value.integer.value[]. However, this is an enum ctl, and it
has to be accessed via value.enumerated.item[]. The former is long
while the latter is unsigned int, so they don't align.
Fixes: c66150824b ('ASoC: dapm: add code to configure dai link parameters')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable cmd_id is only assigned some value and is never used.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code. This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While registering pardev, the irq_func was also registered. As a
result when we tried to probe for the card, an interrupt was generated
and in the ISR we tried to dereference private_data. But private_data
is still NULL as we have not yet done snd_mts64_create(). Lets probe
for the card after mts64 is created.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 94a573500d ("ALSA: mts64: use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32. This results in NOTTY error when the ioctl is
issued.
Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one. This patch addresses
it to return the proper struct.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.
This patch fixes the incompatible ioctl for X32.
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
X32 ABI uses the 64bit timespec in addition to 64bit alignment of
64bit values. This leads to incompatibilities in some PCM ioctls
involved with snd_pcm_channel_info, snd_pcm_status and
snd_pcm_sync_ptr structs. Fix the PCM compat ABI for these ioctls
like the previous commit for ctl API.
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32. Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array. This ends up with the
unknown ioctl (ENOTTY) error.
The fix is to add the compat entries for the new aligned struct.
Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit drops implementation of duplex streams synchronization
from ALSA dice driver, due to a reason of hardware design. This patch
allows dice-based units to generate sounds correctly when isochronous
packet streaming starts at first time.
In IEC 61883-6:2005, CIP packetization layer for AM824 data format
utilizes the value of SYT field in CIP header of received packet for
a reference to phase lock loop. Figure 3 in clause 4.3 describes it.
The value is an offset from cycle_time field of every cycle start packet
from cycle master on IEEE 1394 bus. The time calculated with these two
fields is called as 'presentation timestamp' which represents the time
to play data included in the packet.
Although, this idea includes some problems due to accuracy of timekeep in
cycle master, accuracy of transmission of cycle start packet on the bus
with the other units, accuracy of sampling clock in data transmitter side
and accuracy of replay in data receiver side. In most case, these
accuracies somewhat worse because there's no such ideal hardwares in this
world.
For the issues, ASICs for Dice include Jitter Elimination Technologies
(JET) PLL. The PLL can handle several sources of clock and compensate it
with high-precision internal clock source. The sequence of value in syt
field of received AMDTP packets is one of the sources, therefore
transmitters on IEEE 1394 bus should transfer it.
On the other hand, current ALSA dice driver is programmed with a mode of
duplex streams with synchronization. In this mode, the driver outputs
packets after some incoming packets are handled, to re-use the value of
SYT field in incoming packets to the value for outgoing packets. This mode
is enabled when source signal of sampling clock is set to internal, and
this is a major use case. Thus, in most cases, the unit receives no packets
during a short time after packet streaming starts.
As long as I experienced, this causes the units to generate no sounds at
first time to receive packets. This issue occurs only with Dice II. I guess
this is due to a quirk of the PLL. In short, the PLL cannot generate firm
signals to ADCs/DACs or the other ICs when no packets are received in the
beginning of packet streaming. While, on second time or later, the unit
generates sound correctly. I guess that starting packet streaming at first
time sets the PLL correctly.
Well, still based on my hypothesis and no way to prove it, this commit
drops duplex streams synchronization from this driver. At least, the PLL
requires the sequence of value in SYT field of received AMDTP packets as
one of source of clock signals with internal clock source.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs4271 has three power domains: vd, vl and va.
Enable them all, as long as the codec is in use.
While at it, factored out the reset code into its own function.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add these widgets to allow another path from I2S input.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We cannot use strcpy() to write to a const char * location. This is
causing a 'BUG: unable to handle kernel paging request' error at boot
when using the cht-bsw-rt5645 driver.
With this patch we also fix a wrong indexing in the driver where the
codec_name of the wrong dai_link is being overwritten.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To improve I2S flow, this patch removes soft reset and adds second
I2S clock to use.
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As pointed out by Zhangfei Gao, the sspa_div variable in
brownstone_wm8994_hw_params() is completely unused, so as a cleanup
following a prior patch, this removes both the variable and the division.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Headphone needs enough delay time before unmuting for avoiding pop sound.
We extend the delay time to make sure headphone doesn't pop.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When playing audio through headphone, headphone makes pop noise if system
resumes from S3 to S0. We modify the sequence of writing register for
avoiding pop sound.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains that we might reach the end of this loop without
finding what we're looking for leading to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working. Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: Derick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.
This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660
Co-Authored-By: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.
The noise disappears after using the aamix fixup.
Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0255
Subsystem Id: 0x10280725
Revision Id: 0x100002
No Modem Function Group found
BugLink: http://bugs.launchpad.net/bugs/1549620
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With a previous commit, ALSA oxfw driver retries transferring MIDI
messages at transaction failure for scs1x. On the other hand, there're
fatal transaction error. Then, no MIDI messages reach to the unit anymore.
In this case, MIDI substream should be terminated.
This commit stops MIDI transmission after the fatal error occurs.
Unfortunately, unlike ALSA PCM functionality, ALSA rawmidi core has no
feature to discontinue MIDI substream runtime in kernel side, thus this
commit just stops MIDI transmission without notifying it to userspace.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, ALSA oxfw driver has a TODO to retry MIDI transferring
at transaction failure.
This commit achieves it. Current implementation uses snd_rawmidi_transmit()
to transfer messages, thus the target MIDI messages are not in buffer when
transaction failure is detected. Although we cannot use a pair of
snd_rawmidi_transmit_peek() and snd_ramwidi_transmit_ack(), the
messages are still in scs1x specific structure and the data is available
for retries.
This commit adds a member to the structure for the length of buffered
messages, and uses the value again at retries.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
WoV module needs to be triggered with PCM open, so remove this as
DAPM Sink and will be connected to FE
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
WoV module needs to be triggered with PCM open, so remove this as
DAPM Sink and will be connected to FE
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
WoV module needs to be triggered with PCM open, so remove this as
DAPM Sink and will be connected to FE
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSM4567 supports IV feedback for feedback to the speaker
protection algorithm
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds 2 HDMI FE and BE dai links and also
initializes the jack for each device.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds 2 HDMI FE and BE dai links and also
initializes the jack for each device.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake platform has 3 pin widgets in HDMI codec. This patch adds
3 FE and BE dai links to support these in rt286 machine
Also add jack initialization for each of the device.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ function should not be enabled before irq handler is registered.
In fact, it is done in rt298_probe. So remove it from rt298_i2c_probe.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some registers needed for enabling rt298 IRQ missed on
current driver.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug logging of FLL calculations was confusing. Values were
printed in hex without indicating this by a leading 0x, and
despite these normally being required in decimal. Also where the
register value isn't the actual value (it s a power-of-two or
0 means 1, 1 means 2, ...) it was unclear whether the actual or
register value was shown.
This patch changes the log print so that all mathematical values
are shown in decimal, all register values are shown in hex with a
0x prefix, and where the register value isn't the actual integer
value the decimal integer value is shown in () after the hex
register value.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
value variable can contain error values and is compared with zero.
Its type must be signed.
The problem has been detected using coccinelle script
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the conversion to regmap, I assumed that the devm_() variant could be
used in the soc probe function.
As a mater of fact with the current code the regmap is freed twice
because of the devm_() call:
(mutex_lock) from [<c01f6624>] (debugfs_remove_recursive+0x50/0x1d0)
(debugfs_remove_recursive) from [<c02bf800>] (regmap_debugfs_exit+0x1c/0xd4)
(regmap_debugfs_exit) from [<c02ba1f8>] (regmap_exit+0x28/0xc8)
(regmap_exit) from [<c02aa258>] (release_nodes+0x18c/0x204)
(release_nodes) from [<c02a278c>] (device_release+0x18/0x90)
(device_release) from [<c0239030>] (kobject_release+0x90/0x1bc)
(kobject_release) from [<c0395c94>] (wm9713_soc_remove+0x1c/0x24)
(wm9713_soc_remove) from [<c0384884>] (soc_remove_component+0x50/0x7c)
(soc_remove_component) from [<c0386c28>] (soc_remove_dai_links+0x118/0x228)
(soc_remove_dai_links) from [<c038721c>] (snd_soc_register_card+0x4e4/0xdd4)
(snd_soc_register_card) from [<c0393c54>] (devm_snd_soc_register_card+0x34/0x70)
Fix this by replacing the devm_regmap initialization code with the non
devm_() variant.
Fixes: 700dadfefc ASoC: wm9713: convert to regmap
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
eld control is created based on pcm now.
When monitor is connected, eld control will be bound to
pin automatically.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices. That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.
For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
CONFIG_INPUT.
This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The codec registers are reset during S3. So need to reconfigure
all pins and DP1.2 feature again after resume from S3. Also
reprogram the required registers if the S3 was triggered during
playback.
In suspended state ELD notify callback is not processed, So add
ELD check for all pins as well.
Also turn the codec power domain OFF which is kept ON during
controller resequencing and codec reenumeration.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Powering off codec immediately after sending D3 verb may not set
the node to D3 state. So wait for a confirmation response before
shutting down codec.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
hdaudio hdaudioC0D2: no AFG or MFG node found
snd_hda_intel 0000:00:1f.3: no codecs initialized
Also, HP G470 G3 suffers from the similar problem, as reported in
bugzilla below. On this machine, the codec probe error appears even
at a fresh boot.
As Libin suggested, the same workaround used for Broxton in the commit
[6639484ddaf6: ALSA: hda - disable dynamic clock gating on Broxton
before reset] can be applied for Skylake in order to fix this problem.
The Intel HW team also confirmed that this is needed for SKL.
This patch makes the workaround applied to both SKL and BXT
platforms. The referred macros are moved and one superfluous macro
(IS_BROXTON()) is another one (IS_BXT()) as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731
Suggested-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modify mts64 driver to use the new parallel port device model.
The advantage of using the device model is that the driver gets binded
to the hardware, we get the feature of hotplug, we can bind/unbind the
driver at runtime.
The changes are in the way the driver gets registered with the parallel
port subsystem and the temporary device to probe mts64 card is removed
and mts64_probe() is used in the probe callback.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto