Instead of open-coding for getting the timer resolution, use the
standard snd_timer_resolution() helper.
The original code falls back to the callback function when the
resolution is zero, but it must be always so when the callback
function is defined. So this should be no functional change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There multiple open-codes to get the hardware timer resolution.
Make a local helper function snd_timer_hw_resolution() and call it
from all relevant places.
There is no functional change by this, just a preliminary work for the
following timer resolution hardening patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f65e0d2998 ("ALSA: timer: Call notifier in the same spinlock")
combined the start/continue and stop/pause functions, and in doing so
changed the event code for the pause case to SNDRV_TIMER_EVENT_CONTINUE.
Change it back to SNDRV_TIMER_EVENT_PAUSE.
Fixes: f65e0d2998 ("ALSA: timer: Call notifier in the same spinlock")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAC3 channel map is created during interface parsing,
and in some cases was not freed in failure paths.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error messages at sanity checks of memory pages tend to repeat too
many times once when it hits, and without the rate limit, it may flood
and become unreadable. Replace such messages with the *_ratelimited()
variant.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set PR-38 register to 0x1fe1 will make PLL function more stable.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ssm2305 is a simple Class-D audio amplifier. A application can
turn on/off the device by a gpio. It's also possible to hardwire the
shutdown pin.
Tested on a i.MX6 based custom board.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Trivial fix to spelling mistakes in audigy_outs arrays.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support to core apr service, which is used to query
status of other static and dynamic services on the dsp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As a side effect of the following commit, the active TX
serializer may get disabled which may result in distorted
audio output.
ASoC: davinci-mcasp: Add support for multichannel playback
(2952b27e2e)
For example, if a 4 channel I2S playback with two TX serializers
is activated. Later on, if a recording of 2 channels, with only 1 RX
serializer is started, which will also disable one of the TX
serializer because max_active_serializers is only calculated for
RX (recording) stream. This patch fixes this issue.
Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Many X86 devices using a BYT SoC + RT5640 codec are cheap devices with
generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a
long_name, making it impossible for userspace to have a correct UCM
profile which only uses inputs / outputs which are actually hooked up
on the device.
Our quirks already specify which input the internal mic is connected to
and if a single (mono) speaker is used or if the device has stereo
speakers.
This commit sets a long_name based on the quirks so that userspace can
have UCM profiles doing the right thing based on the long_name.
Note that if we ever encounter the need for a special UCM profile for
some device we can add a quirk to set a specific long_name for the
device,
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Even with our recently tweaked defaults, quite a few bytcr_rt5640 devices
still need quirks to be fully functional. This commits adds quirks where
necessary for the 16 bytcr_rt5640 devices I have access to.
The quirks are added for the following reasons:
1) Devices with only one speaker need the mono quirk to avoid driving an
unused and potentially short-circuited output. 8 of my sample of 16 devs
are mono, 4 of these would work with the defaults if it were not for their
mono speaker.
2) Devices using a different input for the internal mic then the default,
this is the case for 6 of my sample of 16 devices.
3) BYTCR devices without an ACPI channel map, which do not work with the
default of SSP0-AIF2, this is the case for 2 of my sample of 16 devices.
4) Devices which need non-default jack-detect settings, this is the case
for 6 of my sample of 16 devices.
This commit add quirks for the following devices:
Acer Iconia Tab 8 W1-810
Chuwi Vi8
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Pipo W4
PoV-mobii-800w (v2.0)
PoV-mobii-800w (v2.1)
Toshiba Click Mini L9W-B
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use dmi_first_match() instead of dmi_check_system() + callbacks, this
avoid the need to initialize dmi_system_id.callback for each
byt_rt5640_quirk_table entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As we add more quirks it is useful to have some sort of order in the
quirk list, sort it alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Out of the 11 BYTCR devices which I have access to for testing, 6 use
JD1IN4P for jack-detect, 2 use JD1IN4P non-inverted and the other 3 use
JD2IN4N, the ones not using JD1IN4P are all also special in other ways and
need a DMI quirk regardless.
All 5 BYT (non CR) devices which I have access to use JD2IN4N.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we've 2 places with BYTCR defaults: 1. The generic catch-all
DMI_SYS_VENDOR=="Insyde" DMI quirk which selects SSP0-AIF1 for generic
Insyde BYTCR tablets without the ACPI channel package; and 2. the
defaults in the if (is_bytcr) {} code block.
Currently these are not identical, both select IN3 as the internal mic
output, but the "Insyde" DMI quirk leaves out the DIFF_MIC quirk. The
DIFF_MIC quirk should be enabled by default, because enabling diff. input
helps a lot for devices with a differential mic, where as it is a nop on
devices with a normal mic.
This commit adds the DIFF_MIC quirk to the "Insyde" DMI quirk path, by
adding a new BYTCR_INPUT_DEFAULTS define and using that in both code paths
which set BYTCR defaults.
Having a single place where the BYTCR input defaults are defined also
allows defining jack-detect defaults in a single place in a follow-up
commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Out of the 11 BYTCR devices which I have access to for testing,
7 use IN3 for the internal mic and only 1 uses IN1 for the internal mic,
the other 3 use DMIC1.
So IN3 clearly is a better default, using IN3 as default avoids the need
to add DMI quirks for some of these devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add code to support setting jack-detect parameters through quirks and
extend the existing DMI quirk table entries for the Asus T100TA and the
Dell Venue 8 Pro 5830 to enable jack detection.
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the following 3 issues:
1) The sys_vendor match should be for "Dell Inc." not "DellInc.",
without this fixed the quirk never gets applied
2) DMIC1 is used not DMIC2, this was not a problem sofar because for
regular BYT boards (rather then BYTCR) we default to DMIC1 and because
of 1. the quirk was not being applied
3) The Dell Venue 8 5830 Pro only has a single speaker
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use device-properties for setting up the dmic, based on the
BYT_RT5640_MAP() value, instead of using the codec specific
rt5640_dmic_enable() function for this. This also removes the need
for the BYT_RT5640_DMIC_EN quirk, which was always set together with
a MAP() quirk of DMIC1_MAP or DMIC2_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 289ca025ee ("ALSA: Use priority list for managing device
list") changed the way to register/disconnect/free devices via a
single priority list. This helped to make behavior consistent, but it
also changed a slight behavior change: namely, the control device is
registered earlier than others, while it was supposed to be the very
last one.
I've put SNDRV_DEV_CONTROL in the current position as the release of
ctl elements often conflict with the private ctl elements some PCM or
other components may create, which often leads to a double-free.
But, the order of register and disconnect should be indeed fixed as
expected in the early days: the control device gets registered at
last, and disconnected at first.
This patch changes the priority list order to move SNDRV_DEV_CONTROL
as the last guy to assure the register / disconnect order. Meanwhile,
for keeping the messy resource release order, manually treat the
control and lowlevel devices as last freed one.
Additional note:
The lowlevel device is the device where a card driver creates at
probe. And, we still keep the release order control -> lowlevel, as
there might be link from a control element back to a lowlevel object.
Fixes: 289ca025ee ("ALSA: Use priority list for managing device list")
Reported-by: Tzung-Bi Shih <tzungbi@google.com>
Tested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes: 9958e8afbcad ("ASoC: rt5663: Use the set_jack() instead of the export function")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch replaces the export function with the new API set_jack().
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sdma-pcm does not need any information from omap-dma.h, it only needs
to include the omap-dmaengine.h - for the omap_dma_filter_fn, but that
might not be needed at all as OMAP1 was converted to dma_slave_map, but
I can not test OMAP1.
Add the linux/device.h include as well for devm_kzalloc()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information
Add the missing MODULE_LICENSE.
This patch also going to solve:
snd_soc_sdma: Unknown symbol devm_kmalloc (err 0)
snd_soc_sdma: Unknown symbol omap_dma_filter_fn (err 0)
snd_soc_sdma: Unknown symbol snd_dmaengine_pcm_prepare_slave_config (err 0)
snd_soc_sdma: Unknown symbol devm_snd_dmaengine_pcm_register (err 0)
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
retire_capture_urb() may print warning messages when the given URB
doesn't align, and this may flood the system log easily.
Put the rate limit to the message for avoiding it.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement essential initialization of the sound driver:
- introduce required data structures
- handle driver registration
- handle sound card registration
- register sound driver on backend connection
- remove sound driver on backend disconnect
Initialize virtual sound card with streams according to the
Xen store configuration.
Implement ALSA driver operations including:
- manage frontend/backend shared buffers
- manage Xen bus event channel states
Implement requests from front to back for ALSA
PCM operations.
- report ALSA period elapsed event: handle XENSND_EVT_CUR_POS
notifications from the backend when stream position advances
during playback/capture. The event carries a value of how
many octets were played/captured at the time of the event.
- implement explicit stream parameter negotiation between
backend and frontend: handle XENSND_OP_HW_PARAM_QUERY request
to read/update configuration space for the parameter given:
request passes desired parameter interval and the response to
this request returns min/max interval for the parameter to be used.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Handle Xen event channels:
- create for all configured streams and publish
corresponding ring references and event channels in Xen store,
so backend can connect
- implement event channels interrupt handlers
- create and destroy event channels with respect to Xen bus state
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read configuration values from Xen store according
to xen/interface/io/sndif.h protocol:
- introduce configuration structures for different
components, e.g. sound card, device, stream
- read PCM HW parameters, e.g rate, format etc.
- detect stream type (capture/playback)
- read device and card parameters
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce skeleton of the para-virtualized Xen sound
frontend driver.
Initial handling for Xen bus states: implement
Xen bus state machine for the frontend driver according to
the state diagram and recovery flow from sound para-virtualized
protocol: xen/interface/io/sndif.h.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has a table for parameters of each effects. This table is
read-only and can have 'const' qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some function-local strings just for printk therefore
it can be merged into format string.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some strings just for printk therefore they can be
read-only.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An array of templates for control element set is passed as an
argument for snd_hda_add_new_ctls(). This argument has 'const'
qualifier therefore the passed array can have the qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Obtain the number of channels for the Input Terminal from the
Logical Cluster Descriptor. This achieves a useful minimal parsing
of this unit so it can be used in other units in the topology.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds support for the UAC3 insertion controls. The status
is reported as a boolean value in the same way it used to do
for UAC2. Hence, the presence of any connector in the response
will make the control saying the jack is connected.
The UAC2 support for this control has been moved to a dedicated
control for connectors as both UAC2 and UAC3 follow a specific
Control Request Parameter Block for this control. This parameter
block for UAC3 could not be read in the same simplistic
manner as in UAC2.
This implementation is not requesting additional information
from the HIGH CAPABILITY Connectors descriptor.
Tested with an UAC3 device with UAC2 as legacy configuration.
The connector status can be read with `amixer` and the interrupt
is also caught with `alsactl monitor`.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds support for the MIXER UNIT in UAC3. All the information
is obtained from the (HIGH CAPABILITY) Cluster's header. We don't
read the rest of the logical cluster to obtain the channel config
as that wont make any difference in the current mixer behaviour.
The name of the mixer unit is not yet requested as there is not
support for the UAC3 Class Specific String requests.
Tested in an UAC3 device working as a HEADSET with a basic mixer
unit (same as the one in the BADD spec) with no controls.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
bmAtributes offset doesn't exist in the UAC3 CS_EP descriptor.
Hence, checking for pitch control as if it was UAC2 doesn't make
any sense. Use the defined UAC3 offsets instead.
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/hda/patch_ca0132.c:5062:50-51: WARNING: Use ARRAY_SIZE
sound/pci/hda/patch_ca0132.c:5092:50-51: WARNING: Use ARRAY_SIZE
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Semantic patch information:
This makes an effort to find cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE.
Generated by: scripts/coccinelle/misc/array_size.cocci
Fixes: 47cdf76e44 ("ALSA: hda/ca0132: Add new control changes for SBZ + R3Di")
CC: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds support for the P950ER, which has the same required fixup as
the P950HR, but has a different PCI ID.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently it's not possible to set volume lower than 26% (it just mutes).
Also fixes this warning:
Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
[13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1
, and volume works fine for full range.
Signed-off-by: Federico Cuello <fedux@fedux.com.ar>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing loud plops on the Lenovo C50 All in one, add it
to the blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1572975
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wait for Axe-Fx III to fully bootup before initializing card.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new controls to set the effect levels on the R3Di and
SBZ. It also adds vmaster controls to control all surround sound
channels. So that Surround effect switch doesn't conflict with Surround
volume, FX: prefix added to all effect related switches.
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function to set vipsource on cards that use_alt_controls. Different
sequence. Also, add cvoice_switch_set at end of ca0132_select_in so that
when switching between inputs cvoice state is maintained.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds lookup table for floating point decibel volume, and new functions
to allow for setting the decibel level on the DSP.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to change the src_id on scp commands, which
is used in the dsp setup of the Recon3Di and the Sound Blaster Z. It
also makes sure to maintain backwards compatibility with the older
dspio_set_uint_param function, and sets it's src to the default 0x20.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds dsp setup functions for Recon3Di as well as the GPIO functions
specific to it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add dsp setup related functions for the Sound Blaster Z, along with
other helper functions.
Also, add sbz_dsp_startup_check, which fixes a bug where the card
sometimes starts up and has no sound.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch updates core functions to accommodate the Sound Blaster Z and
Recon3Di by changing which functions they use. It also adds the ability
to enable/disable streams.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra init functions for the Sound Blaster Z and
Recon3Di. It also adds more checks to make sure that the DSP isn't
downloaded twice on startup, by checking if the dsp_state is already set
to DSP_DOWNLOADED. It also adds the ability to re-download the DSP on a
resume.
It also changes the init verbs table to apply to all codecs, and takes
the two specific end verbs and puts them into a separate function in
ca0132_init instead.
GPIO functions are also added.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra functions for shutdown on the Sound Blaster Z and
Recon3Di. The Recon3Di only has one specific functions, which sets the
GPIO data pins to 0 to prevent a popping noise.
The Sound Blaster Z exit sequence was taken from Windows. Without this
exit function, the card will not reload properly unless the PC has been
shutdown to clear the onboard memory. There are commented out functions
currently in the sbz_exit_chip function that are added in a later patch.
Also, a reboot notify function has been added, to make sure these
functions are ran before a reboot. This helps when using the card
through VFIO in a virtual machine, to make sure the card reloads the DSP
properly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds iomapping for the region2 section of memory on the SBZ.
This memory region is used in later patches for setting inputs and
outputs. If the mapping fails, the quirk is changed back to QUIRK_NONE
to avoid attempts to write to uninitialized memory.
It also adds a new exit sequence to unmap the iomem for the SBZ.
[ Reordered linux/*.h inclusion in the patch by tiwai ]
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds an unsolicited response tag for the front headphone
panel which uses the same hp_callback as the rear headphone detection.
This patch also adds pincfgs for the R3Di and SBZ which were taken from
the Windows driver. The pins are also defined in the function
ca0132_config. Both the R3Di and SBZ are also given a max out channel
value of 6 to handle 5.1 surround sound in later patches.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di.
Only the currently tested ID's have been added.
This patch also adds the ability to load alternative firmwares for each
card, the firmwares can be obtained from within the Windows driver.
The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses
"ctefx-sbz.bin". If the alternative firmware for the given quirk is not
found, the original ctefx.bin will be used. This has been confirmed to
work for both the R3Di and the SBZ.
This patch also makes the character array *dirstr a const.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_ctl_elem_add_compat(), the fields of the struct 'data' need to be
copied from the corresponding fields of the struct 'data32' in userspace.
This is achieved by invoking copy_from_user() and get_user() functions. The
problem here is that the 'type' field is copied twice. One is by
copy_from_user() and one is by get_user(). Given that the 'type' field is
not used between the two copies, the second copy is *completely* redundant
and should be removed for better performance and cleanup. Also, these two
copies can cause inconsistent data: as the struct 'data32' resides in
userspace and a malicious userspace process can race to change the 'type'
field between the two copies to cause inconsistent data. Depending on how
the data is used in the future, such an inconsistency may cause potential
security risks.
For above reasons, we should take out the second copy.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently released USB Audio Class 3.0 specification
contains BADD (Basic Audio Device Definition) document
which describes pre-defined UAC3 configurations.
BADD support is mandatory for UAC3 devices, it should be
implemented as a separate USB device configuration.
As per BADD document, class-specific descriptors
shall not be included in the Device’s Configuration
descriptor ("inferred"), but host can guess them
from BADD profile number, number of endpoints and
their max packed sizes.
This patch adds support of all BADD profiles from the spec
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the compile error introduced by: "ASoC: Intel: bytcr_rt5640:
Configure PLL1 before using it".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Trivial fix to spelling mistake in dev_err message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are only one set of ops on the compressed stream so no need to
reassign the copy callback repeatedly, stop after copy is seen to be
necessary.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds some common helper functions like translating dsp error
to linux error codes and channel mappings etc.
These functions are used in all the following qdsp6 drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Removed separate byte count variables for playback and capture.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Added dma configuration parameters to rtd structure.
Moved dma configuration parameters initialization to
hw_params callback.
Removed hard coding in prepare and trigger callbacks.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S controller on EP93xx seems to have undocumented HW issue. According to
"EP93xx User’s Guide", controller can handle underflow and either transmit
last sample or zeroes in such case until FIFO is filled again. In reality
undeflow conditions seem to confuse internal state machine from time to
time and the whole stream gets shifted by one byte (as captured by logic
analyser on the I2S outputs). One could only hear noise instead of original
stream and this continues until the FIFO is disabled and enabled again.
Work this around by watching underflow interrupt and resetting I2S TX
channel + fill FIFO with zero samples until DMA catches up again. This is
a nasty workaround, but it works. Hence, Kconfig option to disable it in
case of problems.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver never supported more than 2 channels because of
ep93xx_i2s_dma_data[] supporting only 1 DMA channel in each
direction.
Stop enabling two unused I2S controller FIFOs, this will simplify
future interrupt support.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Ideapad Mixx 320 has a digital mic connected to DMIC2
add a DMI based quirk pointing to the intel_braswell_platform_data
for devices with a mic on DMIC2.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Ideapad Mixx 310 has a differential internal analog mic,
add platform-data for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All DAI drivers are now using the new sdma-pcm platform driver. The
omap-pcm can be removed from the tree, but we need to keep the SND_OMAP_SOC
Kconfig option until the relevant defconfigs are updated to avoid
regression due to missing audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the "realtek,in1-differential" or "realtek,in3-differential"
device-property when the BYT_RT5640_DIFF_MIC quirk is set instead of
directly poking the codec registers.
This also fixes the BYT_RT5640_DIFF_MIC quirk not working when
combined with BYT_RT5640_IN3_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL
registers have not been setup yet and we effectively have an invalid clock
configuration until byt_rt5640_aif1_hw_params() gets called.
Add a new byt_rt5640_prepare_and_enable_pll1() helper and use that from
both platform_clock_control() and byt_rt5640_aif1_hw_params() to fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable button press detection for headsets by using the ovcd IRQ to get
notified of button presses.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add jack-detect support, loosely based on earlier work on this by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Francisco mendez <francisco.mendez@intel.com>
Note getting the OVCD to work reliable was sort of finicky, so there are
quite a few comments on this to hopefully avoid people breaking it in the
future.
This (and the follow-up button press support) has been tested on the
following devices:
Acer Iconia Tab 8 W1-810
Asus T100CHI
Asus T100TA
Asus T200TA
Axxo WT1011
Chuwi Vi8
Dell Venue 8 Pro 5830
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Peaq C1010
Pipo W4
PoV MobiiTAB-P800W (v2.0)
Toshiba Click Mini L9W-B
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196377
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow specifying dmic data pins through device-properties / dt. This will
allow us to stop exporting rt5640_dmic_enable() once all callers of it have
been converted to setting device-properties for this instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms the platform code may need to add device-properties,
rather then relying only on properties set by the firmware.
This commit moves the parsing of the device-properties from the i2c-driver
probe() function, which may be called at any time, to the component-driver
probe() function, which gets called after the platform code calls
snd_soc_register_card().
This allows the platform code to attach extra device-properties before
the device-properties are parsed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no in tree users of platform-data for the rt5640 codec driver,
so lets remove support for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback,
checking RT5640_GBL_CLK to determine if the sys-clk is PLL1 and thus the
PWR_PLL bit in reg PWR_ANLG2 must be set.
RT5640_GBL_CLK is changed by rt5640_set_dai_sysclk(), which gets called by
the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.
This creates an ordering issue, during a dapm transition first all
connected() callbacks are called to build a list of supplies to enable
and then the complete list is walked to enable the supplies. Since the
connected() check happens before enabling any supplies,
is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set
based on the state the "Platform Clock" supply had *before* the transition.
This sometimes results in PWR_PLL being off, even though *after* the
transition PLL1 is configured as sys-clk.
This commit removes is_sys_clk_from_pll() instead simply setting / clearing
PWR_PLL in rt5640_set_dai_sysclk() based on the selected sys-clk, which
fixes this and as a bonus results in a nice cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Trivial fix to spelling mistake in dev_err message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds controllers for digital volume of PCM output. Volume
effects simply linear, not dB scale as follows:
Gained PCM = Original * 0x4000 / Volume
The value range of volume is from 0x0001 to 0xffff. 0x0000 works as
mute. Initial value is 0x4000 (+0dB).
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We can get legacy dai name flag from component driver.
Thus, there is no need to have its parameter on snd_soc_register_dais().
Let's remove unneeded parameter
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no user to call snd_soc_component_add_unlocked() anymore.
Let's merge snd_soc_component_add_unlocked() and
snd_soc_component_add().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit ef050bece1 ("ASoC: Remove platform code now everything is
componentised") removed platform code, then platform_list_show() was
removed, too. But we want to keep it as component_list_show.
This patch add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now no one is using Codec related code.
Let's remove all
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit ef050bece1 ("ASoC: Remove platform code now everything is
componentised") removed platform code, but it didn't remove
.pcm_new/free which existed only for platform.
This patch remove these
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and
.get_regmap. But these are duplicated feature.
Now, no one is using .get_regmap, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec reg_cache is legacy feature, almost all driver are now using
common regmap, and very few driver had been used this legacy feature.
Because of this background, it is now implemented on each
driver internally now.
So now, no one is using codec reg_cache. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new platform driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new platform driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new platform driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new platform driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With the generic dmaengine_pcm support the omap-cpm can be replaced with a
much smaller wrapper.
CPU DAI drivers can use the:
int sdma_pcm_platform_register(struct device *dev,
char *txdmachan, char *rxdmachan);
To register the platform driver, txdmachan/rxdmachan is only needed to be
provided if the DMA channel names are not standard tx/rx, like in case of
McPDM, or the DAI is only capable of one audio direction (DMIC, HDMI).
This patch only introduces the source file and changes to the
Kconfig/Makefile, but does not change any of the DAI drivers to use it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces mixer switch to DAPM one for changing audio source
of line-in.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Trivial fix to spelling mistake in dev_warn messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function dev_get_regmap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the use_single_rw flag to regmap config since the
device does not support bulk transactions over i2c.
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The snd_pcm_stream_lock_irq*() functions decouple disabling interrupts
from the actual locking process. This does not work as expected if the
locking primitives are replaced like on preempt-rt.
Provide one function for locking which uses correct locking primitives.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Functions like snd_usb_copy_string_desc() or
get_term_name() don't actually need mixer_build
state but can use snd_usb_audio structure instead
to get usb device.
This patch has no functional change but prepares
to future UAC3 BADD profiles support which don't
have class-specific descriptors so won't have
mixer_build state.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The control header needs to be read from buffer at this point only
in the case of UAC1 protocol. Move it inside the switch case as other
protocols such as the Basic Audio Device spec will have an empty buffer
that is latter filled as inferred.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
[Ruslan: updated with recently added sanity checks]
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Offload snd_usb_parse_audio_interface() function
which became quite long after adding UAC3 spec support.
Move class-specific parts of uac3 parsing to separate
function which now produce audioformat structure that
is ready to be fed to snd_usb_add_audio_stream().
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Offload snd_usb_parse_audio_interface() function
which became quite long after adding UAC3 spec support.
Move class-specific parts of uac1/2 parsing to separate
function which now produce audioformat structure that
is ready to be fed to snd_usb_add_audio_stream().
This also broke Blue Microphones workaround (which
relies on audioformat decoded from previous altsetting)
into two parts: prepare quirk flag analyzing previous
altsetting then use it with current altsetting.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Offload snd_usb_parse_audio_interface() function which
became quite long after adding UAC3 spec support.
Move audioformat allocation and initialization
into separate function, this will make easier
future refactoring.
Attributes left in the original func because it'll
be used for UAC3 BADD profiles suport in the future
There is no functional change.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The TAS6424 incorporates both DC-load and AC-load diagnostics which are
used to determine the status of the load. The DC diagnostics runs when any
channel is directed to leave the Hi-Z state and enter the MUTE or PLAY
state.
The DC diagnostics are turned on by default but, if a fast startup without
diagnostics is required, the diagnostics can be disabled using a dedicated
ALSA control.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Organize the paths of the mixer, "Input Boost Stage", including
the routes of the mixer. The control is not used correctly before.
Besides, the driver changes the name of the mixer controls.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new macro for iterating over mixer element list for
avoiding the open codes in many places. Also the open-coded
container_of() and the forced cast to struct usb_mixer_elem_info are
replaced with another simple macro, too.
No functional changes but just readability improvement.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dbri driver allocates a resource with GFP_ATOMIC unnecessarily in its
probe function. Replace it with the standard GFP_KERNEL for avoiding
the bogus allocation failures.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the check that ret_val is not -ENOENT is always true and
the quirk bit BYT_RY5651_MCLK_EN is never being cleared because ret_val
is always zero at this point from a previous assignment earlier on.
I believe that ret_val should actually be assigned to the return from
devm_clk_get() as this can return -ENOENT (from a deeper call to
clk_get_sys) and that was the original intention to check this.
Detected by CoverityScan, CID#1460228 ("Logically dead code")
Fixes: 02c0a3b304 ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell WD15 Dock with 0bda:4014 doesn't give any useful strings for the
vendor and the product names. Name them more specifically via quirk,
as well as the UCM profile name.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Historically USB-audio driver sets the card's longname field with the
details of the device and the bus information. It's good per se, but
not preferable when it's referred as the identifier for UCM profile.
This patch adds a quirk profile_name field to override the card's
longname string to a pre-defined one, so that one can create a unique
and consistent ID string for the specific USB device via a quirk table
to be used as a UCM profile name.
The patch does a slight code refactoring to split out the functions to
set shortname and longname fields as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds "Keep Interface" control for each USB-audio device.
The control element is with SND_CTL_IFACE_CARD, so that it won't
appear on any sane mixer applications. For a device that is confirmed
to work well with "keep-interface" mode, user can flip the control via
amixer, e.g.
% amixer -c1 cset iface=CARD,name='Keep Interface' on
and save/restore the state via alsactl.
The reason to provide this via control API is that the behavior must
be pretty depending on the device (and the firmware in it), so it's
not ideal to apply via module option.
For a device that certainly works, we may set it statically via a
quirk table entry. But a device like Dell WD15 dock behaves so
differently depending on the firmware, and we can't set it
statically. So leave this as a dynamic switch each user can adjust
freely.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new flag to struct snd_usb_audio for allowing the device
to skip usb_set_interface() calls at changing or closing the stream.
As of this patch, the flag is nowhere set, so it's just a place
holder. The dynamic switching will be added in the following patch.
A background information for this change:
Dell WD15 dock with Realtek chip gives a very long pause at each time
the driver changes the altset, which eventually happens at every PCM
stream open/close and parameter change. As the long pause happens in
each usb_set_interface() call, there is nothing we can do as long as
it's called. The workaround is to reduce calling it as much as
possible, and this flag indicates that behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary change for the upcoming quirk implementation.
Currently USB-audio driver tries to call usb_set_interface() whenever
the format change with interface/altset modification happens. In this
patch, the check is replaced with the comparison of cur_altsetting and
the targeted altsetting pointer, so that the driver may skip the
unnecessary function calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the early commit adcdd0d5a1 ("ALSA: usb-audio: Skip volume
controls triggers hangup on Dell USB Dock"), we add the mixer quirks
for Dell dock to skip two mixer FU's for playback. This supposed that
the device has always the proper initial volume, but it doesn't seem
always correct.
This patch adds the explicit initialization of the volumes to the
fixed 0dB at the device probe time. Also, such a fixup is needed
after the resume, so a new function is hooked to the resume callback
as well.
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1089467
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, to add PCM substreams for each of available tx/rx streams,
this driver uses a condition based on model-name. This is not enough
to support unknown models.
In former commits, this driver gains cache of stream formats. For models
which support protocol extension, all of available steam formats are
cached. For known models, hard-coded stream formats are used to generate
the cache. For unknown models, stream formats at current mode of sampling
transmission frequency is cached.
Anyway, at least, the cached formats are used to expose constrains of PCM
substreams for userspace applications. Thus, The cached data can be also
used to add PCM substreams themselves, instead of the name-based
conditions.
This commit obsoletes local frag of force_two_pcms.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure gets members for cache of stream
formats. The cache allows to apply correct constraints and rules to
runtime of PCM substream. They allows userspace applications to change
current sampling transmission frequency.
This commit uses the cacher for the PCM constraints and rules.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure gets members for cache of stream
formats. The cache can be used to count the number of MIDI substreams
to add.
This commit uses the cache for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preparation for userspace applications to change current sampling
transmission frequency via ALSA PCM interface.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a small refactoring for better readability.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, to check running stream, available stream formats are used
at current sampling transmission frequency (stf). But when changing stf,
it's convenient to use cache of stream formats.
This commit applies this idea.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TC Applied Technologies (TCAT) have added extension to DICE protocol. This
protocol extension is called as Extended Application Protocol, a.k.a. EAP.
In this protocol extension, units get additional 9 address spaces. One of
it is for current configuration. In this address space, a pair of router
and stream formats are exposed per mode of three sampling transmission
frequencies.
This commit adds support the protocol extension for address space of the
current configuration to generate cache of stream formats.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alesis shipped some models with DICE ASICs. All of them just support
DICE original protocol and drivers can't retrieve all of available stream
formats without changing status of sampling transmission frequency
actually.
This commit puts some hard-coded parameters for the models. When detecting
the models, the corresponding parameters are copied as cache of stream
formats.
I note that each of pair of iO14/iO26 and MultiMix 8/12/16 has the same
model ID on their configuration ROM. The MultiMix 8/12/16 just support
one mode for sampling transmission frequency and ALSA dice driver already
handles them correctly. The iO14/iO26 support three modes and need
hard-coded parameters. To distinguish these two models, this commit let
the driver to retrieve current stream formats and compare it to known
parameters, then decide it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TC Electronic shipped some models with DICE ASICs. All of them just support
DICE original protocol and drivers can't retrieve all of available stream
formats without changing status of sampling transmission frequency
actually.
This commit puts some hard-coded parameters for the models. When detecting
the models, the corresponding parameters are copied as cache of stream
formats.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure get members for cache of stream
formats. This commit fills the cache with stream formats at current mode
of sampling transmission frequency.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Products with DICE interface in market can support variable stream
formats for three levels of sampling transmission frequencies. To
record these formats, a proxy structure got several fields in former
commit.
This commit adds a proc node to output the stream formats for debugging
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the other drivers in ALSA firewire stack, ALSA dice driver does't
create 'firewire' directory for proc nodes because it has 'dice' node
only. But this is inconvenient because I have a plan to add another proc
node to output available stream formats from cache.
This commit let the driver to create the directory and put 'dice' node
into it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A previous commit 6f688268b3 ('ALSA: dice: purge generating channel
cache') purged cache of stream formats. DICE interface originally has
no feature to assist drivers to retrieve available formats for all of
supported sampling transmission frequencies, without changing the
frequency actually.
For later release of Dice ASICs such as TCD2210, Dice interface has
extended protocol and can support the feature. This assists drivers
to retrieve available stream formats.
This commit is a first step to regain the cache to generate PCM rules
for all of supported sampling transmission frequencies.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Trivial fix to spelling mistake in KERN_ERR error messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but
tlv.h is not included. This causes build failure when local macro is
defined by comment-out.
This commit fixes the bug. At the same time, the alias macro is replaced
with a destination macro added at a commit 46e860f768 ("ALSA: rename
TLV-related macros so that they're friendly to user applications")
Reported-by: Connor McAdams <conmanx360@gmail.com>
Fixes: 44f0c9782c ('ALSA: hda/ca0132: Add tuning controls')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DP-MST support requires more PCM streams than usual, hence
CONFIG_SND_DYNAMIC_MINORS is almost mandatory. Currently the driver
just warns and continues even if streams are missing, but it doesn't
seem to enough convince users to switch to the modern setup.
This patch adds the enforced selection of CONFIG_SND_DYNAMIC_MINORS
from CONFIG_SND_HDA_CODEC_HDMI for covering that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go
further and hit the sanity check pcm_sanity_check() when the ioctl is
called right after open. It may eventually spew a kernel warning, as
triggered by syzbot, depending on kconfig.
The lack of PCM state check there was just an oversight. Although
it's no real crash, the spurious kernel warning is annoying, so let's
add the proper check.
Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData
registers actually have different format. The only currently used bit
(Left_Right_Justify) has different position. Fix this and simplify the
whole setup taking into account the fact that both registers have zero
default value.
The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J
support (currently unused).
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2)
(refer to "EP93xx User's Guide").
Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got
SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old
behavior.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For the sake of uniformity, this patch adds a callback mt2701_afe_pcm_probe()
in mt2701_afe_pcm_dai_component to retrieve the regmap - the canonical way to
obtain the pointer..
Doing so, we could switch to use devm_snd_soc_register_component() to register
the component driver.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hard-coded setups conflict with topology defined ones. Move this code to
codec_fixup so that SOF can override codec dai settings, e.g. to only use
2 channels.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
avoid using snd_soc_platform, which is removed after 4.18
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some control API callbacks in aloop driver are too lazy to take the
loopback->cable_lock and it results in possible races of cable access
while it's being freed. It eventually lead to a UAF, as reported by
fuzzer recently.
This patch covers such control API callbacks and add the proper mutex
locks.
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At a commit f91c9d7610 ('ALSA: firewire-lib: cache maximum length of
payload to reduce function calls'), maximum size of payload for tx
isochronous packet is cached to reduce the number of function calls.
This cache was programmed to updated at a first callback of ohci1394 IR
context. However, the maximum size is required to queueing packets before
starting the isochronous context.
As a result, the cached value is reused to queue packets in next time to
starting the isochronous context. Then the cache is updated in a first
callback of the isochronous context. This can cause kernel NULL pointer
dereference in a below call graph:
(sound/firewire/amdtp-stream.c)
amdtp_stream_start()
->queue_in_packet()
->queue_packet()
(drivers/firewire/core-iso.c)
->fw_iso_context_queue()
->struct fw_card_driver.queue_iso()
(drivers/firewire/ohci.c)
= ohci_queue_iso()
->queue_iso_packet_per_buffer()
buffer->pages[page]
The issued dereference occurs in a case that:
- target unit supports different stream formats for sampling transmission
frequency.
- maximum length of payload for tx stream in a first trial is bigger
than the length in a second trial.
In this case, correct number of pages are allocated for DMA and the 'pages'
array has enough elements, while index of the element is wrongly calculated
according to the old value of length of payload in a call of
'queue_in_packet()'. Then it causes the issue.
This commit fixes the critical bug. This affects all of drivers in ALSA
firewire stack in Linux kernel v4.12 or later.
[12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.302439] PGD 0
[12665.302440] P4D 0
[12665.302450]
[12665.302470] Oops: 0000 [#1] SMP PTI
[12665.302487] Modules linked in: ...
[12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P OE 4.13.0-38-generic #43-Ubuntu
[12665.303154] Hardware name: /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012
[12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000
[12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086
[12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0
[12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000
[12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0
[12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003
[12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000
[12665.303554] FS: 00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000
[12665.303600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0
[12665.303674] Call Trace:
[12665.303698] fw_iso_context_queue+0x18/0x20 [firewire_core]
[12665.303735] queue_packet+0x88/0xe0 [snd_firewire_lib]
[12665.303770] amdtp_stream_start+0x19b/0x270 [snd_firewire_lib]
[12665.303811] start_streams+0x276/0x3c0 [snd_dice]
[12665.303840] snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice]
[12665.303882] ? vma_gap_callbacks_rotate+0x1e/0x30
[12665.303914] ? __rb_insert_augmented+0xab/0x240
[12665.303936] capture_prepare+0x3c/0x70 [snd_dice]
[12665.303961] snd_pcm_do_prepare+0x1d/0x30 [snd_pcm]
[12665.303985] snd_pcm_action_single+0x3b/0x90 [snd_pcm]
[12665.304009] snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm]
[12665.304035] snd_pcm_prepare+0x68/0x90 [snd_pcm]
[12665.304058] snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm]
[12665.304083] snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm]
[12665.304108] snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[12665.304131] do_vfs_ioctl+0xa8/0x630
[12665.304148] ? entry_SYSCALL_64_after_hwframe+0xe9/0x139
[12665.304172] ? entry_SYSCALL_64_after_hwframe+0xe2/0x139
[12665.304195] ? entry_SYSCALL_64_after_hwframe+0xdb/0x139
[12665.304218] ? entry_SYSCALL_64_after_hwframe+0xd4/0x139
[12665.304242] ? entry_SYSCALL_64_after_hwframe+0xcd/0x139
[12665.304265] ? entry_SYSCALL_64_after_hwframe+0xc6/0x139
[12665.304288] ? entry_SYSCALL_64_after_hwframe+0xbf/0x139
[12665.304312] ? entry_SYSCALL_64_after_hwframe+0xb8/0x139
[12665.304335] ? entry_SYSCALL_64_after_hwframe+0xb1/0x139
[12665.304358] SyS_ioctl+0x79/0x90
[12665.304374] ? entry_SYSCALL_64_after_hwframe+0x72/0x139
[12665.304397] entry_SYSCALL_64_fastpath+0x24/0xab
[12665.304417] RIP: 0033:0x7f2ec3750ef7
[12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7
[12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007
[12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000
[12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0
[12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000
[12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00
[12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8
[12665.304743] CR2: 0000000000000030
[12665.317701] ---[ end trace 9d55b056dd52a19f ]---
Fixes: f91c9d7610 ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls')
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Trivial fix to spelling mistake in module parameter description text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
mute can be connected to GPIO. In that case we have to drive it to the
correct value
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The standby pin can be connected to a GPIO. In that case we have to drive
it to the correct values for the TAS6424 to operate properly.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For devices implemented as a MFD it is common to only have a single node
in devicetree representing the whole device. As such when looking up
codec_conf mappings we should match against both the devices of_node and
the devices parent's of_node, as is already done for DAIs and platform
components.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequencer virmidi code has an open race at its output trigger
callback: namely, virmidi keeps only one event packet for processing
while it doesn't protect for concurrent output trigger calls.
snd_virmidi_output_trigger() tries to process the previously
unfinished event before starting encoding the given MIDI stream, but
this is done without any lock. Meanwhile, if another rawmidi stream
starts the output trigger, this proceeds further, and overwrites the
event package that is being processed in another thread. This
eventually corrupts and may lead to the invalid memory access if the
event type is like SYSEX.
The fix is just to move the spinlock to cover both the pending event
and the new stream.
The bug was spotted by a new fuzzer, RaceFuzzer.
BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit c469652bb5 ("ALSA: hda - Use IS_REACHABLE() for
dependency on input") simplified the dependencies with IS_REACHABLE()
macro, but it broke due to its incorrect usage: it should have been
IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT).
Fixes: c469652bb5 ("ALSA: hda - Use IS_REACHABLE() for dependency on input")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
preallocate pages should use platform device,
since we set dma mask for platform device.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
preallocate pages should use platform device,
since we set dma mask for platform device.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e9f5f1e456 ("ARM: OMAP2+: Remove legacy mux code") removed
CONFIG_OMAP_MUX making impossible to build Nokia N810 audio support. Remove
this dependency so we can do at least build tests.
Fixes: e9f5f1e456 ("ARM: OMAP2+: Remove legacy mux code")
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The bias for the analog HS microphone is coming from Retu/Vilma chip and
we do not have control over it, yet.
For clarity, add a new DAPM_MIC widget for the HS mic and document the
current state.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The non DT boot is no longer supported and when booting with DT the device
names are different.
Fix them up for now, but the n810.c should be updated to support probing
via DT with proper bindings.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the capture DAPM route due to core changes regarding to mic bias.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes boilerplate of GPLv2, use only SPDX identifier as
same as other recently ASoC DAI drivers.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the sisr and sisr2 variable types to u32 to avoid the following
sparse warnings:
sound/soc/fsl/fsl_ssi.c:391:42: warning: incorrect type in argument 3 (different base types)
sound/soc/fsl/fsl_ssi.c:391:42: expected unsigned int *val
sound/soc/fsl/fsl_ssi.c:391:42: got restricted __be32 *<noident>
sound/soc/fsl/fsl_ssi.c:393:17: warning: restricted __be32 degrades to integer
sound/soc/fsl/fsl_ssi.c:393:15: warning: incorrect type in assignment (different base types)
sound/soc/fsl/fsl_ssi.c:393:15: expected restricted __be32 [usertype] sisr2
sound/soc/fsl/fsl_ssi.c:393:15: got unsigned int
sound/soc/fsl/fsl_ssi.c:396:50: warning: incorrect type in argument 3 (different base types)
sound/soc/fsl/fsl_ssi.c:396:50: expected unsigned int [unsigned] val
sound/soc/fsl/fsl_ssi.c:396:50: got restricted __be32 [usertype] sisr2
sound/soc/fsl/fsl_ssi.c:398:42: warning: incorrect type in argument 2 (different base types)
sound/soc/fsl/fsl_ssi.c:398:42: expected unsigned int [unsigned] [usertype] sisr
sound/soc/fsl/fsl_ssi.c:398:42: got restricted __be32 [addressable] [usertype] sisr
In other places where regmap_read() is used a u32 variable is passed
to store the register read value, so do the same here as well.
regmap API already takes care of endianness, so the usage of u32 is safe.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to make audio_substream_data structure variable
consistent throughout the code, changed the name from
audio_config to rtd wherever applicable.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SPDX identifiers to all remaining files in sound/soc/mediatek/
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the MT7622 AFE which reuses MT2701 driver.
We also introduce the 'struct mt2701_soc_variants' to differentiate
between the SoC generations as there might be other (existing or future)
chips that use the same binding and driver, then being a little more
abstract could help in the long run.
Cc: Jia Zeng <jia.zeng@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MTK_STREAM_NUM to common header and modify related stuff so that
the other SoCs can reuse it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adjusts the mt2701_afe_i2s_ops to simplify the control
logic of the I2S path.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In error path of snd_dice_stream_init_duplex(), stream data for incoming
packet can be left to be initialized.
This commit fixes it.
Fixes: 436b5abe22 ('ALSA: dice: handle whole available isochronous streams')
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the MediaTek MT6351 codec driver.
MT6351 communicate with SoC through MediaTek PMIC wrapper.
MT6351 use MediaTek proprietary audio interface.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2 loops calling open and 4 loops calling free for all the
components on a DAI link. Factor out these loops into helper functions
to make the code a little clearer.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As all drivers have been moved over to the new generic component
code remove the now unused platform specific code.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The core should only call free on a component if said component has
already had open called on it. This is not presently the case and most
compressed drivers in the kernel assume it will be. This causes null
pointer dereferences in the drivers as they attempt clean up for stuff
that was never put in place.
This is fixed by aborting calling open callbacks once a failure is
encountered and then during clean up only iterating through the
component list to that point.
This is a fairly quick fix to the issue, to allow backporting. There
is more refactoring to follow to tidy the code up a little.
Fixes: 9e7e3738ab ("ASoC: snd_soc_component_driver has snd_compr_ops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reduce the boilerplate code to retrieve the private data.
No functional change intended.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Garlic Tseng <garlic.tseng@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited
number of devices available, and HD-audio, especially with HDMI/DP
codec, will fail to create more than two devices.
The driver warns about the lack of such devices and skips the PCM
device creations, but the HDMI driver still tries to create the
corresponding JACK, SPDIF and ELD controls even for the non-existing
PCM substreams. This results in confusion on user-space, and even may
break the operation.
Similarly, Intel HDMI/DP codec builds the ELD notification from i915
graphics driver, and this may be broken if a notification is sent for
the non-existing PCM stream.
This patch adds the check of the existence of the assigned PCM
substream in the both scenarios above, and skips the further operation
if the PCM substream is not assigned.
Fixes: 9152085def ("ALSA: hda - add DP MST audio support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A small batch of fixes collected since the merge window, none of which
are particularly large or remarkable. They've all been cooking in -next
for a while.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrgVhUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BLSB/9mHlzA1d78kFd0JXJvk2embzdNGUcg
Qaj3FxNiAt4ghZvxYb/o47qIVfimawnMigtad+vIjqJOD1v0P6ydLRKVmaKYBLft
48XTnphOt4X4LfXnKglpWl8F0qwtzU/p2SFzTYmztxLjebqOcPOeG8C4WBega5KR
AXco1APps0u2qwH3hdSlEbstBp+YFOReGrierKkxafwlv8tbryzPFeOOK/znV22Y
ZaQlAdWzkVV+YGOcNCHyR1lgAbi7vkVGPWPl+N6WuCi0a7c1HlWMuRlSDWvdUe5e
PVBEnq0OK6MGI9jalMhJ8i1GEM6IWyaodCphsgDqojKGa415FBuzKG1s
=xFqk
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-4.17-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.17
A small batch of fixes collected since the merge window, none of which
are particularly large or remarkable. They've all been cooking in -next
for a while.
On this Lenovo ThinkCentre machine. There are two front mics,
we change the location for one of them.
Relation: f33f79f3d0 ("ALSA: hda/realtek - change the location for
one of two front microphones")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, one place in RME9652 driver may expand
the array directly from the user-space value with speculation:
sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap)
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, a couple of places in HDSP MADI driver
may expand the array directly from the user-space value with
speculation:
sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap)
sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap)
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, a couple of places in ASIHPI driver may
expand the array directly from the user-space value with speculation:
sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap)
sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters'
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, one place in OPL3 driver may expand the
array directly from the user-space value with speculation:
sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap'
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, one place in HD-audio hwdep ioctl codes
may expand the array directly from the user-space value with
speculation:
sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps'
As get_wcaps() itself is a fairly frequently called inline function,
and there is only one single call with a user-space value, we replace
only the latter one to open-code locally with array_index_nospec()
hardening in this patch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As Smatch recently suggested, a few places in OSS sequencer codes may
expand the array directly from the user-space value with speculation,
namely there are a significant amount of references to either
info->ch[] or dp->synths[] array:
sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap)
sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths'
Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.
We may put array_index_nospec() at each place, but here we take a
different approach:
- For dp->synths[], change the helpers to retrieve seq_oss_synthinfo
pointer directly instead of the array expansion at each place
- For info->ch[], harden in a normal way, as there are only a couple
of places
As a result, the existing helper, snd_seq_oss_synth_is_valid() is
replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device
where a similar array expansion is done, too, although it wasn't
reported by Smatch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When get_synthdev() is called for a MIDI device, it returns the fixed
midi_synth_dev without the use refcounting. OTOH, the caller is
supposed to unreference unconditionally after the usage, so this would
lead to unbalanced refcount.
This patch corrects the behavior and keep up the refcount balance also
for the MIDI synth device.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ALC255 its own depop functions for alc_init and alc_shutup.
Assign it to ALC256 usage.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fill COEF to change EAPD to verb control.
Assigned codec type.
This is an additional fix over 92f974df34 ("ALSA: hda/realtek - New
vendor ID for ALC233").
[ More notes:
according to Kailang, the chip is 10ec:0235 bonding for ALC233b,
which is equivalent with ALC255. It's only used for Lenovo.
The chip needs no alc_process_coef_fw() for headset unlike ALC255. ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai