All BCM63XX SoCs starting with BCM6358 have a BMIPS4350 instead of a
BMIPS3300, so select it unless support for any of the older SoCs is
selected.
All BMIPS4350 have only two CPUs, so select the appropriate default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/5355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS software IRQs 0 and 1 are used for interprocessor signaling (IPI)
on BMIPS SMP. Make the board support code aware of them.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
[jogo@openwrt.org: move sw irqs behind timer irq]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For non-SMP, uses the new random canary value that is stored in the
task struct whenever a new task is forked. Based on ARM version in
df0698be14 and subject to the same
limitations: the variable GCC expects, __stack_chk_guard, is global,
so this will not work on SMP.
Quoting Nicolas Pitre <nico@fluxnic.net>: "One way to overcome this
GCC limitation would be to locate the __stack_chk_guard variable into
a memory page of its own for each CPU, and then use TLB locking to
have each CPU see its own page at the same virtual address for each of
them."
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5488/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implements basic stack protector support based on ARM version in
c743f38013 , with Kconfig option,
constant canary value set at boot time, and script to check if
compiler actually supports stack protector.
Tested by creating a kernel module that writes past end of char[].
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Cc: Carmelo Amoroso <carmelo.amoroso@st.com>
Patchwork: https://patchwork.linux-mips.org/patch/5448/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When building with -fstack-protector, gcc emits the __stack_chk_guard and
__stack_chk_fail symbols to check for stack stability. These symbols are
defined in vmlinux but the generated vmlinux.bin that is used to create
the compressed vmlinuz image has no symbol table so the linker can't find
these symbols during the final linking phase. As a result of which, we
need either to redefine these symbols just for the compressed image or drop
the -fstack-protector option when building the compressed image. This patch
implements the latter of two options.
Fixes the following linking problem:
dbg.c:(.text+0x7c): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0x80): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xd4): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xec): undefined reference to `__stack_chk_fail'
[ralf@linux-mips.org: I'm applying this before the patch that actually adds
stack protector support for MIPS. This means, it will not be possible
to trigger above error message with any commit from the tree but rather
they are what one would hit without this commit.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5575/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into sched/core
Merge in a recent upstream commit:
c2853c8df5 include/linux/math64.h: add div64_ul()
because:
72a4cf20cb sched: Change cfs_rq load avg to unsigned long
relies on it.
[ We don't rebase sched/core for this, because the handful of
followup commits after the broken commit are not behavioral
changes so are unlikely to be needed during bisection. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the
generated tlbmiss_handler_setup_pgd before it was committed to memory,
causing boot failures:
trap_init()
|- per_cpu_trap_init()
| |- TLBMISS_HANDLER_SETUP()
| |- tlbmiss_handler_setup_pgd()
|- flush_tlb_handlers()
To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler()
right after they were generated. We can do this as the cache handling is
initialized just before creating the tlb handlers.
This issue was introduced in 3d8bfdd030
("MIPS: Use C0_KScratch (if present) to hold PGD pointer.").
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sni/pcit.o
arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes the following build problem:
arch/mips/sni/pcimt.c:188:30: error: 'sni_controller'
defined but not used [-Werror=unused-variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes the following build problem:
mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error
because VMLINUX_LOAD_ADDRESS was an empty string for that platform
so the vmlinux.lds.S created an invalid section entry on line 50.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5548/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_desc_get_irq_data(irq))
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-7-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As pointed out by Maciej, POOL16C minor opcodes were mostly shifted
by one bit. Correct those opcodes, and also add jraddiusp to the enum.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: david.daney@cavium.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS R2 documents state that an execution hazard barrier is needed
after a TLBR before reading EntryLo.
Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5526/
CC arch/mips/kernel/rtlx.o
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable]
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
Caused by 496ad9aa8e [new helper:
file_inode(file)].
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the bogus selects on USB-related symbols for 6345 and 6338, not
only we do not yet support USB on BCM63XX, but they also cause the
following warnings:
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
make[4]: Leaving directory `/home/florian/dev/linux'
Just get rid of these bogus Kconfig selects because neither 6345 nor
6338 actually have built-in USB host controllers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: http://patchwork.linux-mips.org/patch/5497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Writing a value to a WatchLo* register creates an execution hazard, so
if its value is then read before that hazard is cleared then said value
may be invalid. The mips_probe_watch_registers function must therefore
clear the execution hazard between setting the match bits in a WatchLo*
register & reading the register back in order to check which are set.
This fixes intermittent incorrect watchpoint register probing on some
MIPS cores such as interAptiv & proAptiv.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/5474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.
Fixes the following problem when EARLY_PRINTK is enabled for powertv:
arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X
or CONFIG_SIBYTE_SB1250 is selected according to the
arch/mips/sibyte/Makefile.
This fixes the following build problem:
arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sibyte/bcm1480/bus_watcher.o
CHK kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2
The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
CC arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1
This happens because 8deab1144b [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/
The write() prototype expects a const char * as argument so declare
it as such.
Fixes the following build problem:
arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It's needed for the TASK_INTERRUPTIBLE definition.
Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)
[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
ap136_pci_init expects a u8 pointer as an argument.
Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself. The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel. Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.
The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:
CC arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
LD init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
LD init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Conflicts:
drivers/net/wireless/ath/ath9k/Kconfig
drivers/net/xen-netback/netback.c
net/batman-adv/bat_iv_ogm.c
net/wireless/nl80211.c
The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.
The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().
Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.
The nl80211 conflict is a little more involved. In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported. Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.
However, the dump handlers to not use this logic. Instead they have
to explicitly do the locking. There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so. So I fixed that whilst handling the overlapping changes.
To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time
back and the comments/Documentation never got updated.
I figured it out when I was going through sched-domains.txt and so thought of
fixing it globally.
I haven't crossed check if the stuff that is referenced in sched/core.c by all
these files is still present and hasn't changed as that wasn't the motive behind
this patch.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CC init/do_mounts.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/icmpv6.h:4,
from include/linux/ipv6.h:59,
from include/net/ipv6.h:16,
from include/linux/sunrpc/clnt.h:26,
from include/linux/nfs_fs.h:30,
from init/do_mounts.c:30:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/mounts.o
CC init/init_task.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/netfilter.h:5,
from include/net/netns/netfilter.h:5,
from include/net/net_namespace.h:20,
from include/linux/init_task.h:14,
from init/init_task.c:1:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/built-in.o
CC arch/mips/cavium-octeon/setup.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/asm-generic/pci-dma-compat.h:7,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129,
from include/linux/pci.h:1451,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12,
from arch/mips/cavium-octeon/setup.c:41:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1
make[1]: *** [arch/mips/cavium-octeon] Error 2
make: *** [arch/mips] Error 2
[ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.]
Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5519/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:
arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
adds a socket option for low latency polling.
This allows overriding the global sysctl value with a per-socket one.
Unexport sysctl_net_ll_poll since for now it's not needed in modules.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMC MSP71XX gpio drivers were added in v2.6.28, see commit
9fa32c6b02 ("MIPS: PMC MSP71XX gpio drivers"). They are only built if
CONFIG_HAVE_GPIO_LIB is set.
But the Kconfig symbol HAVE_GPIO_LIB was already removed in v2.6.27, see
commit 7444a72eff ("gpiolib: allow user-selection"). So these drivers
were never buildable. Perhaps no-one noticed because there are no in
tree users of msp71xx_init_gpio() and msp71xx_init_gpio_extended().
Anyhow, these drivers can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
promcon.o is built if CONFIG_PROM_CONSOLE is set. But there's no Kconfig
symbol PROM_CONSOLE, so promcon.c is unbuildable. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds support for the Broadcom BCM6345 SoC Ethernet. BCM6345
has a slightly different and older DMA engine which requires the
following modifications:
- the width of the DMA channels on BCM6345 is 64 bytes vs 16 bytes,
which means that the helpers enet_dma{c,s} need to account for this
channel width and we can no longer use macros
- BCM6345 DMA engine does not have any internal SRAM for transfering
buffers
- BCM6345 buffer allocation and flow control is not per-channel but
global (done in RSET_ENETDMA)
- the DMA engine bits are right-shifted by 3 compared to other DMA
generations
- the DMA enable/interrupt masks are a little different (we need to
enabled more bits for 6345)
- some register have the same meaning but are offsetted in the ENET_DMAC
space so a lookup table is required to return the proper offset
The MAC itself is identical and requires no modifications to work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The invalid value for scratch register is -1, so update the checks of
the form (scratch_reg > 0) to be (scratch_reg >= 0). This will fix
the case in Netlogic XLP where the scratch_reg can be 0.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5444/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
XLR/XLP COP0 scratch is register 22, sel 0-7. Add a function
c0_kscratch() which returns the scratch register for the platform,
and use the return value while generating TLB handlers.
Setup kscratch_mask to 0xf for XLR/XLP since the config4 register
does not exist. This allows the kernel to allocate scratch registers
0-3 if needed.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5445/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix an issue in plat_irq_dispatch due to which it can call do_IRQ
with a PIC irq that is not mapped.
When a per-cpu interrupt and a PIC interrupt are both active, the
check 'eirr & PERCPU_IRQ_MASK' will be true, but the interrupt in 'i'
will be the number of the PIC interrupt. In this case, we will call
do_IRQ on the PIC interrupt without mapping it with nlm_irq_to_xirq().
Fix this by using __ffs64 instead of __ilog2_u64 and using the
interrupt number instead of mask to identify per-cpu interrupts.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The XLPs in production do not need these workarounds. Remove the code and
the associated ifdef.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5430/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix a cache error found in stress test, caused by the prefetch instruction
going beyond valid memory when acessing the last page of a region. Add
the pref_backup logic similar to XLR in XLP too.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5431/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Earlier we just waited for the first thread of the CPU to come online
before proceeding to wake up others. Update it to wait for all the CPUs
in the core. This will be useful when the boot-up is slow, like while
debugging or when running in a simulator.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5429/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix an issue in the reset code. Since this code is copied to the
reset vector, using 'j' for looping is not correct. Use relative
branch 'b'.
Update the usage of 'j' in smpboot.S to be consistent although it
is not a bug there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5427/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the nlm_cpu_ready[] array used by the cpu wakeup code to the
boot area, along with rest of the boot parameter code.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5425/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This moves the calculation and casting needed to access the CPU initialization
data to a function nlm_get_boot_data()
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5426/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The core initialization and reset vector setup needs to be done
even when booting uniprocessor. Move this code from smp.c to setup.c
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5428/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The reset and core initialization code should be available for
uniprocessor as well. This changes is just to take out the code
into a different file, without any change to the logic.
The change for uniprocessor initialization code is in a later patch.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5423/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Create new flle arch/mips/netlogic/xlp/dt.c and move the device
tree related code there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5422/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add SYS_SUPPORTS_ZBOOT and SYS_SUPPORTS_ZBOOT_UART16550 config options
for XLR and XLP.
Update boot/compressed/uart-16550.c to add UART port for XLR and XLP.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5417/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add COP2 register state structure and functions for Netlogic XLP. The
RX and TX buffers and status registers are to be saved. Since the
registers are 64-bit, do the implementation in inline assembly which
works on both 32-bit and 64-bit kernels.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5413/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rename macro nlm_cop2_enable() to nlm_cop2_enable_irqsave() and the macro
nlm_cop2_restore to nlm_cop2_disable_irqrestore(). The new names will
reflect the functionality better, and will make nlm_cop2_restore()
available to be used later in COP2 save/restore patch.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5412/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The sel argument os nlm_read_c2_status() was not used and the macro
returned the sel 0 in all cases. Fix this by defining two macros:
nlm_read_c2_status0() and nlm_read_c2_status1() to return the two
status registers.
Add functions to write to the status registers as well.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5414/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Kernel threads should be able to use COP2 if the platform needs it.
Do not call die_if_kernel() for a coprocessor unusable exception if
the exception due to COP2 usage. Instead, the default notifier for
COP2 exceptions is updated to call die_if_kernel.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5415/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the common code for saving and restoring platform specific COP2
registers to switch_to(). This will make supporting new platforms (like
Netlogic XLP) easier.
The platform specific COP2 definitions are to be specified in
asm/processor.h and in asm/cop2.h.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5411/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add SWIOTLB config option and related files to Netlogic platform.
Some XLP SoC components like the SD/MMC interface cannot do DMA beyond
32-bit physical address. The SD/MMC driver can use memory outside this
range for IO, to support this we have to add bounce buffers implemented
by SWIOTLB.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Patchwork: https://patchwork.linux-mips.org/patch/5410/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Provide a default implementation of phys_to_dma and dma_to_phys in
mach-generic/dma_coherence.h.
If CONFIG_NEED_SG_DMA_LENGTH is defined, the dma_length field in
struct scatterlist is used. Set this up in mips_dma_map_sg so that
the default mips DMA ops can be used when SWIOTLB is enabled.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5409/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS fixes from Ralf Baechle:
"Resurrect Alchemy platforms by invoking the WAIT instructions with
interrupts enabled. This still leaves the race condition between
testing TIF_NEED_RESCHED and the WAIT instruction for Alchemy
platforms which need a different fix than other MIPS platforms. But
at least it gets MIPS platforms flying again.
There are also fixes for two build errors (CONFIG_FTRACE=y with
CONFIG_DYNAMIC_FTRACE=n) and CONFIG_VIRTUALIZATION without CONFIG_KVM"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ftrace: Add missing CONFIG_DYNAMIC_FTRACE
MIPS: include: mmu_context.h: Replace VIRTUALIZATION with KVM
MIPS: Alchemy: fix wait function
Pull kvm bugfixes from Gleb Natapov:
"There is one more fix for MIPS KVM ABI here, MIPS and PPC build
breakage fixes and a couple of PPC bug fixes"
* 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm/ppc/booke64: Fix lazy ee handling in kvmppc_handle_exit()
kvm/ppc/booke: Hold srcu lock when calling gfn functions
kvm/ppc/booke64: Disable e6500 support
kvm/ppc/booke64: Fix AltiVec interrupt numbers and build breakage
mips/kvm: Use KVM_REG_MIPS and proper size indicators for *_ONE_REG
kvm: Add definition of KVM_REG_MIPS
KVM: add kvm_para_available to asm-generic/kvm_para.h
CONFIG_FRAME_POINTER is not selectable for MIPS so this
codepath was never executed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5440/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The API requires that the GET_ONE_REG and SET_ONE_REG ioctls have this
extra information encoded in the register identifiers.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch
which needs to be driven slightly differently from the traditional
external switches. This patch introduces changes in arch/mips/bcm63xx in order
to:
- register a bcm63xx_enetsw driver instead of bcm63xx_enet driver
- update DMA channels configuration & state RAM base addresses
- add a new platform data configuration knob to define the number of
ports per switch/device and force link on some ports
- define the required switch registers
On the driver side, the following changes are required:
- the switch ports need to be polled to ensure the link is up and
running and RX/TX can properly work
- basic switch configuration needs to be performed for the switch to
forward packets to the CPU
- update the MIB counters since the integrated
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current bcm63xx_enet driver always uses bcmenet_shared_base whenever
it needs to access DMA channel configuration space or access the DMA
channel state RAM. Split these register in 3 parts to be more accurate:
- global DMA configuration
- per DMA channel configuration space
- per DMA channel state RAM space
This is preliminary to support new chips where the global DMA
configuration remains the same, but there is a varying number of DMA
channels located at a different memory offset.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
arch_ftrace_update_code and ftrace_modify_all_code are only
available if CONFIG_DYNAMIC_FTRACE is selected.
Fixes the following build problem on MIPS randconfig:
arch/mips/kernel/ftrace.c: In function 'arch_ftrace_update_code':
arch/mips/kernel/ftrace.c:31:2: error: implicit declaration of function
'ftrace_modify_all_code' [-Werror=implicit-function-declaration]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5435/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The kvm_* symbols are only available if KVM is selected.
Fixes the following linking problem on a randconfig:
arch/mips/built-in.o: In function `local_flush_tlb_mm':
(.text+0x18a94): undefined reference to `kvm_local_flush_tlb_all'
arch/mips/built-in.o: In function `local_flush_tlb_range':
(.text+0x18d0c): undefined reference to `kvm_local_flush_tlb_all'
kernel/built-in.o: In function `__schedule':
core.c:(.sched.text+0x2a00): undefined reference to `kvm_local_flush_tlb_all'
mm/built-in.o: In function `use_mm':
(.text+0x30214): undefined reference to `kvm_local_flush_tlb_all'
fs/built-in.o: In function `flush_old_exec':
(.text+0xf0a0): undefined reference to `kvm_local_flush_tlb_all'
make: *** [vmlinux] Error 1
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5437/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
'compatible' is used by strlen() in __of_device_is_compatible().
Ensure strings are always '\0' terminated.
'of_ids is not a structure in "include/uapi/*", so no need to initialize
it completly; using strlcpy() instead of strncpy() will do.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: juhosg@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: Linux-Arch <linux-arch@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/5330/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
'compatible' is used by strlen() in __of_device_is_compatible().
Ensure strings are always '\0' terminated.
'of_ids is not a structure in "include/uapi/*", so no need to initialize
it completly; using strlcpy() instead of strncpy() will do.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Linux-Arch <linux-arch@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/5329/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When you turn it off, the kernel is unusable, so get rid of the option
and always allow unaligned access.
The Octeon specific memcpy intentionally does unaligned accesses and it
must not fault.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5303/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Only an interrupt can wake the core from 'wait', enable interrupts
locally before executing 'wait'.
[ralf@linux-mips.org: This leave the race between an interrupt that's
setting TIF_NEED_RESCHEd and entering the WAIT status. but at least it's
going to bring Alchemy back from the dead, so I'm going to apply this
patch.]
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5408/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes across the field. The only area that's standing out is the
exception handling which received it's dose of breakage as part of the
microMIPS patchset"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: add missing SZ_1M multiplier
MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf.
MIPS: OCTEON: Improve _machine_halt implementation.
MIPS: rtlx: Fix implicit declaration of function set_vi_handler()
MIPS: Trap exception handling fixes
MIPS: Quit exposing Kconfig symbols in uapi headers.
MIPS: Remove duplicate definition of check_for_high_segbits.
On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing
multiplier.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5378/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
cputime_to_timeval() takes a struct timeval *as its second argument but
a struct compat_timeval * will be passed resulting in:
CC arch/mips/kernel/binfmt_elfn32.o
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’:
arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfn32.c:122:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfn32.c:55:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
AS arch/mips/kernel/scall64-n32.o
CC arch/mips/kernel/signal_n32.o
CC arch/mips/kernel/binfmt_elfo32.o
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’:
arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
In file included from arch/mips/kernel/binfmt_elfo32.c:165:0:
arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default]
In file included from include/asm-generic/cputime.h:12:0,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4,
from include/linux/sched.h:28,
from include/linux/ptrace.h:5,
from include/uapi/linux/elfcore.h:7,
from include/linux/elfcore.h:7,
from arch/mips/kernel/binfmt_elfo32.c:78:
include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As noted by Wladislav Wiebe:
$ halt
..
Sent SIGKILL to all processes
Requesting system halt
[66.729373] System halted.
[66.733244]
[66.734761] =====================================
[66.739473] [ BUG: lock held at task exit time! ]
[66.744188] 3.8.7-0-sampleversion-fct #49 Tainted: G O
[66.750202] -------------------------------------
[66.754913] init/21479 is exiting with locks still held!
[66.760234] 1 lock held by init/21479:
[66.763990] #0: (reboot_mutex){+.+...}, at: [<ffffffff801776c8>] SyS_reboot+0xe0/0x218
[66.772165]
[66.772165] stack backtrace:
[66.776532] Call Trace:
[66.778992] [<ffffffff805780a8>] dump_stack+0x8/0x34
[66.783972] [<ffffffff801618b0>] do_exit+0x610/0xa70
[66.788948] [<ffffffff801777a8>] SyS_reboot+0x1c0/0x218
[66.794186] [<ffffffff8013d6a4>] handle_sys64+0x44/0x64
This is an alternative fix to the one sent by Wladislav. We kill the
watchdog for each CPU and then spin in WAIT with interrupts disabled.
This is the lowest power mode for the OCTEON. If we were to spin with
interrupts enabled, we would get a continual stream of warning messages
and backtraces from the lockup detector, so I chose to disable
interrupts.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Maxim Uvarov <muvarov@gmail.com>
Cc: Wladislav Wiebe <wladislav.kw@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5324/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge 'net' bug fixes into 'net-next' as we have patches
that will build on top of them.
This merge commit includes a change from Emil Goode
(emilgoode@gmail.com) that fixes a warning that would
have been introduced by this merge. Specifically it
fixes the pingv6_ops method ipv6_chk_addr() to add a
"const" to the "struct net_device *dev" argument and
likewise update the dummy_ipv6_chk_addr() declaration.
Signed-off-by: David S. Miller <davem@davemloft.net>
The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core. It only is useful
for cpufreq drivers for their internal purposes.
Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.
Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.
[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off. Remove all the remaining references to it.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linux Way is to return -ENOIOCTLCMD to the vfs when an
unimplemented ioctl is requested. Do this in kvm_mips instead of a
random mixture of -ENOTSUPP and -EINVAL.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because not all 256 CP0 registers are ever implemented, we need a
different method of manipulating them. Use the
KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism.
Now unused code and definitions are removed.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also we cannot set special zero register, so force it to zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All registers are 64-bits wide, 32-bit guests use the least
significant portion of the register storage fields.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
v2->v3: fix typo on simeth
shortened dev_getter
shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to
be almost impossible to get right for all of the different platforms
these days.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlGeP/gACgkQMUfUDdst+ykXygCfeIL5/HMREhUSHQgb6IiIDR81
QHAAn0zJfRAyWUz4AtbrRsLSVfk3Q9vm
=DQIq
-----END PGP SIGNATURE-----
Merge tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
to be almost impossible to get right for all of the different
platforms these days."
* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: cxacru: potential underflow in cxacru_cm_get_array()
USB: ftdi_sio: Add support for Newport CONEX motor drivers
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
usb: ohci: fix goto wrong tag in err case
usb: isp1760-if: fix memleak when platform_get_resource fail
usb: ehci-s5p: fix memleak when fallback to pdata
USB: serial: clean up chars_in_buffer
USB: ti_usb_3410_5052: fix chars_in_buffer overhead
USB: io_ti: fix chars_in_buffer overhead
USB: ftdi_sio: fix chars_in_buffer overhead
USB: ftdi_sio: clean up get_modem_status
USB: serial: add generic wait_until_sent implementation
USB: serial: add wait_until_sent operation
USB: set device dma_mask without reference to global data
USB: Blacklisted Cinterion's PLxx WWAN Interface
usb: option: Add Telewell TW-LTE 4G
USB: EHCI: remove bogus #error
USB: reset resume quirk needed by a hub
USB: usb-stor: realtek_cr: Fix compile error
usb, chipidea: fix link error when USB_EHCI_HCD is a module
...
Pull kvm bugfixes from Gleb Natapov.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock()
KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a user visible API.
KVM: take over co-maintainership from Marcelo, fix MAINTAINERS entry
2a0b24f56c broke Trap exception handling in
the standard MIPS mode. Additionally the microMIPS-mode trap code mask is
wrong, as it's a 4-bit field. Here's a fix.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5309/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The kernel's struct pt_regs has many fields conditional on various
Kconfig variables, we cannot be exporting this garbage to user-space.
Move the kernel's definition to asm/ptrace.h, and put a uapi only
version in uapi/asm/ptrace.h gated by #ifndef __KERNEL__
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5305/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As a relatively new ABI, N64 only had getdents syscall while other modern
architectures have getdents64.
This was noticed when Python 3.3 shifted to the latter one for aarch64.
[ralf@linux-mips.org: The history of getdents64 is a little complicated.
Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.]
added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213,
then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul
of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.]
Signed-off-by: Aron Xu <aron@debian.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock().
Memory slots should be acccessed from a SRCU read section.
- kvm_mips_map_page() now returns an error code to it's callers, instead of
calling panic() if it cannot find a mapping for a particular gfn.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
local_irq_enable() may expand into very different code, so it rather should
stay in C. Also this keeps the assembler code size constant which keeps
the rollback code simple. So it's best to split r4k_wait into two parts,
one C and one assembler.
Finally add the local_irq_enable() to r4k_wait to ensure the WAIT
instruction in __r4k_wait() will work properly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Impact:
1:convert all remain take_over_console to do_take_over_console
2:update take_over_console to do_take_over_console in comment
Commit dc9641895a ("vt: delete unneeded functions
register_con_driver|take_over_console") delete take_over_console,
but forget to convert remain take_over_console's users to new API
do_take_over_console, this patch fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes:
MODPOST 393 modules
ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined!
make[3]: *** [__modpost] Error 1
It would have been possible to just export min_low_pfn but in the end
pfn_valid should return 1 for any pfn argument for which a struct page
exists so using min_low_pfn was wrong anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull devm usage cleanup from Wolfram Sang:
"Lately, I have been experimenting how to improve the devm interface to
make writing device drivers easier and less error prone while also
getting rid of its subtle issues. I think it has more potential but
still needs work and definately conistency, especiall in its usage.
The first thing I come up with is a low hanging fruit regarding
devm_ioremap_resouce(). This function already checks if the passed
resource is valid and gives an error message if not. So, we can
remove similar checks from the drivers and get rid of a bit of code
and a number of inconsistent error strings.
This series only removes the unneeded check iff devm_ioremap_resource
follows platform_get_resource directly. The previous version tried to
shuffle code if needed, too, what lead to an embarrasing bug. It
turned out to me that shuffling code for all cases found will make the
automated script too complex, so I am unsure if an automated cleanup
is the proper tool for this case. Removing the easy stuff seems
worthwhile to me, though.
Despite various architectures and platform dependencies, I managed to
compile test 45 out of 57 modified files locally using heuristics and
defconfigs."
Pulled because: 296 deletions, 0 additions.
* 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
sound/soc/kirkwood: don't check resource with devm_ioremap_resource
sound/soc/fsl: don't check resource with devm_ioremap_resource
arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
arch/arm/plat-samsung: don't check resource with devm_ioremap_resource
arch/arm/mach-tegra: don't check resource with devm_ioremap_resource
drivers/watchdog: don't check resource with devm_ioremap_resource
drivers/w1/masters: don't check resource with devm_ioremap_resource
drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
drivers/video/omap2: don't check resource with devm_ioremap_resource
drivers/usb/phy: don't check resource with devm_ioremap_resource
drivers/usb/host: don't check resource with devm_ioremap_resource
drivers/usb/gadget: don't check resource with devm_ioremap_resource
drivers/usb/chipidea: don't check resource with devm_ioremap_resource
drivers/thermal: don't check resource with devm_ioremap_resource
drivers/staging/nvec: don't check resource with devm_ioremap_resource
drivers/staging/dwc2: don't check resource with devm_ioremap_resource
drivers/spi: don't check resource with devm_ioremap_resource
drivers/rtc: don't check resource with devm_ioremap_resource
drivers/pwm: don't check resource with devm_ioremap_resource
drivers/pinctrl: don't check resource with devm_ioremap_resource
...
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: John Crispin <blogic@openwrt.org>
This sets up the devicetree file for the rt3050 chip series and rt3052
eval board to use the right compatible string for the dwc2 driver.
Acked-by: John Crispin <blogic@openwrt.org>
Cc: blogic@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: Matthijs Kooijman <matthijs@stdin.nl>
Patchwork: https://patchwork.linux-mips.org/patch/5226/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
schedule_mfi is supposed to be extracted from schedule(), and
is used in thread_saved_pc and get_wchan.
But, after optimization, schedule() is reduced to a sibling
call to __schedule(), and no real frame info can be extracted.
One solution is to compile schedule() with -fno-omit-frame-pointer
and -fno-optimize-sibling-calls, but that will incur performance
degradation.
Another solution is to extract info from the real scheduler,
__schedule, and this is the approache adopted here.
This patch reads the __schedule address by either following
the 'j' call in schedule if KALLSYMS is disabled or by using
kallsyms_lookup_name to lookup __schedule if KALLSYMS is
available, then, extracts schedule_mfi from __schedule frame info.
This patch also fixes the "Can't analyze schedule() prologue"
warning at boot time.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Given a function, get_frame_info() analyzes its instructions
to figure out frame size and return address. get_frame_info()
works as follows:
1. analyze up to 128 instructions if the function size is unknown
2. search for 'addiu/daddiu sp,sp,-immed' for frame size
3. search for 'sw ra,offset(sp)' for return address
4. end search when it sees jr/jal/jalr
This leads to an issue when the given function is a sibling
call, example shown as follows.
801ca110 <schedule>:
801ca110: 8f820000 lw v0,0(gp)
801ca114: 8c420000 lw v0,0(v0)
801ca118: 080726f0 j 801c9bc0 <__schedule>
801ca11c: 00000000 nop
801ca120 <io_schedule>:
801ca120: 27bdffe8 addiu sp,sp,-24
801ca124: 3c028022 lui v0,0x8022
801ca128: afbf0014 sw ra,20(sp)
In this case, get_frame_info() cannot properly detect schedule's
frame info, and eventually returns io_schedule's instead.
This patch adds 'j' to the end search condition to workaround
sibling call cases.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5236/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As reported:
This problem was discovered when doing BGP traffic with the TCP MD5 option
activated, where the following call chain caused a crash:
* tcp_v4_rcv
* tcp_v4_timewait_ack
* tcp_v4_send_ack -> follow stack variable rep.th
* tcp_v4_md5_hash_hdr
* tcp_md5_hash_header
* sg_init_one
* sg_set_buf
* virt_to_page
I noticed that tcp_v4_send_reset uses a similar stack variable and
also calls tcp_v4_md5_hash_hdr, so it has the same problem.
The networking core can indirectly call virt_to_phys() on stack
addresses, if this is done from PID 0, the stack will usually be in
CKSEG0, so virt_to_phys() needs to work there as well
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jiang Liu <liuj97@gmail.com>
Cc: eunb.song@samsung.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5220/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch fixes crash_dump.c build error. Build error logs are as follow.
arch/mips/kernel/crash_dump.c: In function 'kdump_buf_page_init':
arch/mips/kernel/crash_dump.c:67: error: implicit declaration of function 'kmalloc'
arch/mips/kernel/crash_dump.c:67: error: assignment makes pointer from integer without a cast
Signed-off-by: EunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This reverts commit d532f3d267.
The original commit has several problems:
1) Doesn't work with 64-bit kernels.
2) Calls TLBMISS_HANDLER_SETUP() before the code is generated.
3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when
only one call is needed.
[ralf@linux-mips.org: Also revert the bits of the ASID patch which were
hidden in the KVM merge.]
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5242/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 84ebc10294 (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel. This patch (as1677) removes the
remaining instances of that symbol.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull stray syscall bits from Al Viro:
"Several syscall-related commits that were missing from the original"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE
unicore32: just use mmap_pgoff()...
unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
Pull MIPS updates from Ralf Baechle:
- More work on DT support for various platforms
- Various fixes that were to late to make it straight into 3.9
- Improved platform support, in particular the Netlogic XLR and
BCM63xx, and the SEAD3 and Malta eval boards.
- Support for several Ralink SOC families.
- Complete support for the microMIPS ASE which basically reencodes the
existing MIPS32/MIPS64 ISA to use non-constant size instructions.
- Some fallout from LTO work which remove old cruft and will generally
make the MIPS kernel easier to maintain and resistant to compiler
optimization, even in absence of LTO.
- KVM support. While MIPS has announced hardware virtualization
extensions this KVM extension uses trap and emulate mode for
virtualization of MIPS32. More KVM work to add support for VZ
hardware virtualizaiton extensions and MIPS64 will probably already
be merged for 3.11.
Most of this has been sitting in -next for a long time. All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.
Semantic conflict with kvm updates done as per Ralf
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
MIPS: Add new GIC clockevent driver.
MIPS: Formatting clean-ups for clocksources.
MIPS: Refactor GIC clocksource code.
MIPS: Move 'gic_frequency' to common location.
MIPS: Move 'gic_present' to common location.
MIPS: MIPS16e: Add unaligned access support.
MIPS: MIPS16e: Support handling of delay slots.
MIPS: MIPS16e: Add instruction formats.
MIPS: microMIPS: Optimise 'strnlen' core library function.
MIPS: microMIPS: Optimise 'strlen' core library function.
MIPS: microMIPS: Optimise 'strncpy' core library function.
MIPS: microMIPS: Optimise 'memset' core library function.
MIPS: microMIPS: Add configuration option for microMIPS kernel.
MIPS: microMIPS: Disable LL/SC and fix linker bug.
MIPS: microMIPS: Add vdso support.
MIPS: microMIPS: Add unaligned access support.
MIPS: microMIPS: Support handling of delay slots.
MIPS: microMIPS: Add support for exception handling.
MIPS: microMIPS: Floating point support.
MIPS: microMIPS: Fix macro naming in micro-assembler.
...
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
possible to do so which has been causing confusion and breakage. This
branch does the work to completely eliminate GENERIC_GPIO.
However, it is not trivial to just create a branch to remove it. Over
the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
added to linux-next that conflicts with this branch. The following must
be done to resolve the conflicts when merging this branch into mainline:
* "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
replaced with CONFIG_GPIOLIB
* "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
documentation.
* Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
* definitions of the option in architecture Kconfig code should be deleted.
Stephen has 3 merge fixup patches[1] that do the above. They are currently
applicable on mainline as of May 2nd.
[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=xodc
-----END PGP SIGNATURE-----
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux
Pull removal of GENERIC_GPIO from Grant Likely:
"GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any
valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
is possible to do so which has been causing confusion and breakage.
This branch does the work to completely eliminate GENERIC_GPIO."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
gpio: update gpio Chinese documentation
Remove GENERIC_GPIO config option
Convert selectors of GENERIC_GPIO to GPIOLIB
blackfin: force use of gpiolib
m68k: coldfire: use gpiolib
mips: pnx833x: remove requirement for GENERIC_GPIO
openrisc: default GENERIC_GPIO to false
avr32: default GENERIC_GPIO to false
xtensa: remove explicit selection of GENERIC_GPIO
sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
powerpc: remove redundant GENERIC_GPIO selection
unicore32: default GENERIC_GPIO to false
unicore32: remove unneeded select GENERIC_GPIO
arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
arm: remove redundant GENERIC_GPIO selection
mips: alchemy: require gpiolib
mips: txx9: change GENERIC_GPIO to GPIOLIB
mips: loongson: use GPIO driver on CONFIG_GPIOLIB
mips: remove redundant GENERIC_GPIO select
Add new clockevent driver that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: Raghu Gandham <Raghu.Gandham@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.
* No longer select CSRC_GIC by default for Malta platform.
* Limit choice for either the GIC or R4K clocksource, not both.
* Change location in Makefile.
* Created new 'gic_read_count' function in common 'irq-gic.c' file.
* Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
* Surround GIC specific code in Malta platform code with #ifdef's.
* Only initialize the GIC clocksource if it was selected. Original
code called it unconditionally if a GIC was found.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Move the global variable 'gic_frequency' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Move the global variable 'gic_present' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to handle unaligned accesses in MIPS16e mode.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Add structures for all the MIPS16e instructions. Also add the
enumerations for all the bit fields for opcodes, functions, etc.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Optimise 'strnlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Optimise 'strlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Optimise 'strncpy' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Optimise 'memset' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
This adds the option to build the Linux kernel using only the
microMIPS ISA. The resulting kernel binary is, at a minimum,
20% smaller than using the MIPS32R2 ISA.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b
and turn off LL/SC when building a pure microMIPS kernel. This is
a temporary fix until the cmpxchg assembly macro functions are
re-written to not use the HI/LO registers in address calculations.
Also add .insn in selected user access functions which would
otherwise produce ISA mode jump incompatibilities. This is also a
temporary fix.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to handle unaligned accesses in microMIPS mode.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Add logic needed to properly calculate exceptions for delay slots
when in microMIPS mode.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
All exceptions must be taken in microMIPS mode, never in classic
MIPS mode or the kernel falls apart. A few NOP instructions are
used to maintain the correct alignment of microMIPS versions of
the exception vectors.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to do floating point emulation in microMIPS mode.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
The macros did not properly take into account the ISA that
the kernel was being compiled with. A classic MIPS kernel
will have the standard 'uasm_i_##op' macro functions with
'MM_uasm_i_##op' macro functions for the microMIPS version.
A pure microMIPS kernel will have the standard macros with
'CL_uasm_i_##op' macro functions for the classic version.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Jump or branch target addresses have the first bit set. The
original mask did not take this into account and will cause
a field overflow warning for the target address when a jump
immediate instruction is built.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Currently, the following instructions are translated:
- CACHE (indexed)
- CACHE (va based): translated to a SYNCI, overkill on D-CACHE operations,
but still much faster than a trap.
- mfc0/mtc0: the virtual COP0 registers for the guest are implemented as
2-D array.
[COP#][SEL] and this is mapped into the guest kernel address space @ VA 0x0.
mfc0/mtc0 operations are transformed to load/stores.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Changes for pure microMIPS cores to dynamically determine the ASID
size at boot time.
Includes bug fix https://patchwork.linux-mips.org/patch/5230/
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Original patch by Ralf Baechle and removed by Harold Koerfgen
with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This
allows for more generic kernels since the size of the ASID
and corresponding masks can be determined at run-time. This
patch is also required for the new Aptiv cores and has been
tested on Malta and Malta Aptiv platforms.
[ralf@linux-mips.org: Added relevant part of fix
https://patchwork.linux-mips.org/patch/5213/]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of
all inclusions of it by Malta and SEAD-3 platforms.
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
ar7 powertv build"].
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
unbreak powertv build"].
[ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add parsing of the environment and command line variables passed to
the kernel to the firmware library.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add declaration of 'mips_scroll_message' and 'mips_display_message'
to the common generic header file for the MIPS Technologies Inc.
development boards.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Setting the LED_CORE_SUSPENDRESUME flag causes the LED driver core to call
led_classdev_suspend/led_classdev_resume during suspend/resume. Since this is
exactly what the driver's custom suspend/resume callbacks do we can replace them
by setting the LED_CORE_SUSPENDRESUME flag.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
- Note that this file is statically linked with the rest of the host kernel (KSEG0). This is because kernel modules are
loaded into mapped space on MIPS and we want to make sure that we don't get any host kernel TLB faults while
manipulating TLBs.
- Virtual Guest TLBs are implemented as 64 entry array regardless of the number of host TLB entries.
- Shadow TLBs map Guest virtual addresses to Host physical addresses.
- TLB miss handling details:
Guest KSEG0 TLBMISS (0x40000000 – 0x60000000): Transparent to the Guest.
Guest KSEG2/3 (0x60000000 – 0x80000000) & Guest UM TLBMISS (0x00000000 – 0x40000000)
Lookup in Guest/Virtual TLB
If an entry doesn’t match
deliver appropriate TLBMISS LD/ST exception to the guest
If entry does exist in the Guest TLB and is NOT Valid
Deliver TLB invalid exception to the guest
If entry does exist in the Guest TLB and is VALID
Inject the TLB entry into the Shadow TLB
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- The Guest kernel is run in UM and privileged instructions cause a trap.
- If the instruction causing the trap is in a branch delay slot, the branch
needs to be emulated to figure out the PC @ which the guest will resume
execution.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- Implements the arch specific APIs for KVM, some are stubs for MIPS
- kvm_mips_handle_exit(): Main 'C' distpatch routine for handling exceptions while in "Guest" mode.
- Also implements in-kernel timer interrupt support for the guest.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- __kvm_mips_vcpu_run: main entry point to enter guest, we save kernel context, load
up guest context from and ERET to guest context.
- mips32_exception: L1 exception handler(s), save k0/k1 and jump to main handlers.
- mips32_GuestException: Generic exception handlers for exceptions/interrupts while in
guest context. Save guest context, restore some kernel context and jump to
main 'C' handler: kvm_mips_handle_exit()
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- Add the KVM option to MIPS build files.
- Add default config files for KVM host/guest kernels.
- Change the link address for the Malta KVM Guest kernel to UM (0x40100000).
- Add KVM Kconfig file with KVM/MIPS specific options
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In the Linux kernel traditionally pfns are represented by an unsigned long.
However a few bits of the SGI IP27 platform code that were ported from
IRIX are using pfn_t for historic reasons. This is conflicting with
KVM's use of pfn_t.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add some mosty unused, but missing clocks for BCM6328 and BCM6362.
This also fixes PCIe init on BCM6362.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5200/
Acked-by: John Crispin <blogic@openwrt.org>
There is now a generic function for detecting memory size. Use this instead of
the one found in the ath79 support.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5149/
Call detect_memory_region() from plat_mem_setup() unless the size was already
read from the system controller.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5184/
Populate struct soc_info with the data that describes our RAM window.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5183/
Populate struct soc_info with the data that describes our RAM window.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5182/
Populate struct soc_info with the data that describes our RAM window.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5181/
Populate struct soc_info with the data that describes our RAM window.
As memory detection fails on RT5350 we read the amount of available memory
from the system controller.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5180/
Depending on the actual SoC we have a different base address as well as minimum
and maximum size for RAM. Add these fields to the per SoC structure.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5179/
Add a generic way of detecting the available RAM. This function is based on the
implementation already used by ath79.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5178/
Add a dtsi file for MT7620A SoC and a sample dts file.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/5190/
Add a dtsi file for RT3883 SoC and a sample dts file.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/5189/
Add a dtsi file for RT2880 SoC and a sample dts file.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/5188/
* remove nodes for cores whose drivers are not upstream yet
* add compat string for an additional soc
* fix a whitespace error
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/5186/
Add support code for mt7620 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5177/
Add support code for rt3883 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5185/
Add support code for rt2880 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5176/
Add a field for the uart muxing mask and set it inside the rt305x setup code.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5744/
This will be used for RT3662/RT3883.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5173/
These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
hence be static.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5172/
RT2880 has a different location for the early serial port.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5170/
Add a few missing defines that are needed to make memory detection work on the
RT5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5169/
Trivial patch that adds a comment that makes the code more readable.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5168/
Add a few missing clocks.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5167/
Add a few missing defines that are needed to make USB and clock detection work
on the RT3352.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5166/
The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility
to make PCI work on rt3883.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5165/
Previously this functionality was only available to users of the mips_machine
api. Moving the code to prom.c allows us to also add a OF wrapper.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5164/
Current GPIO chip implementation in octeon-irq is still broken, even after upstream
commit 87161ccdc6 (MIPS: Octeon: Fix broken interrupt
controller code). It works for GPIO IRQs that have reset-default configuration, but
not for edge-triggered ones.
The problem is in octeon_irq_gpio_map_common(), which passes modified "hw" variable
(which has range of possible values 16..31) as "gpio_line" parameter to
octeon_irq_set_ciu_mapping(), which saves it in private data of the IRQ chip. Later,
neither octeon_irq_gpio_setup() is able to re-configure GPIOs (cvmx_write_csr() is
writing to non-existent CVMX_GPIO_BIT_CFGX), nor octeon_irq_ciu_gpio_ack() is able
to acknowledge such IRQ, because "mask" is incorrect.
Fix is trivial and has been tested on Cavium Octeon II -based board, including
both level-triggered and edge-triggered GPIO IRQs.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin.ext@nsn.com>
Cc: David Daney <david.daney@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Patchwork: http://patchwork.linux-mips.org/patch/4980/
Acked-by: John Crispin <blogic@openwrt.org>
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/4986/
Acked-by: John Crispin <blogic@openwrt.org>
The operations on the bitmap pointers are protected by "memory"
clobbering raw_local_irq_{save,restore}(), so there is no need for
volatile here. By removing the volatile we get better code generation
out of the compiler.
Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: http://patchwork.linux-mips.org/patch/4966/
Acked-by: John Crispin <blogic@openwrt.org>
Currently, init_new_context() only for each online CPU, this may cause
memory corruption when CPU hotplug and fork() happens at the same time.
To avoid this, we make init_new_context() cover each possible CPU.
Scenario:
1, CPU#1 is being offline;
2, On CPU#0, do_fork() call dup_mm() and copy a mm_struct to the child;
3, On CPU#0, dup_mm() call init_new_context(), since CPU#1 is offline
and init_new_context() only covers the online CPUs, child has the
same asid as its parent on CPU#1 (however, child's asid should be 0);
4, CPU#1 is being online;
5, Now, if both parent and child run on CPU#1, memory corruption (e.g.
segfault, bus error, etc.) will occur.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Acked-by: David Daney <david.daney@cavium.com>
Patchwork: http://patchwork.linux-mips.org/patch/4995/
Acked-by: John Crispin <blogic@openwrt.org>
This and the next patch resolve memory corruption problems while CPU
hotplug. Without these patches, memory corruption can triggered easily
as below:
On a quad-core MIPS platform, use "spawn" of UnixBench-5.1.3 (http://
code.google.com/p/byte-unixbench/) and a CPU hotplug script like this
(hotplug.sh):
while true; do
echo 0 >/sys/devices/system/cpu/cpu1/online
echo 0 >/sys/devices/system/cpu/cpu2/online
echo 0 >/sys/devices/system/cpu/cpu3/online
sleep 1
echo 1 >/sys/devices/system/cpu/cpu1/online
echo 1 >/sys/devices/system/cpu/cpu2/online
echo 1 >/sys/devices/system/cpu/cpu3/online
sleep 1
done
Run "hotplug.sh" and then run "spawn 10000", spawn will get segfault
after a few minutes.
This patch:
Currently, clear_page()/copy_page() are generated by Micro-assembler
dynamically. But they are unavailable until uasm_resolve_relocs() has
finished because jump labels are illegal before that. Since these
functions are shared by every CPU, we only call build_clear_page()/
build_copy_page() only once at boot time. Without this patch, programs
will get random memory corruption (segmentation fault, bus error, etc.)
while CPU Hotplug (e.g. one CPU is using clear_page() while another is
generating it in cpu_cache_init()).
For similar reasons we modify build_tlb_refill_handler()'s invocation.
V2:
1, Rework the code to make CPU#0 can be online/offline.
2, Introduce cpu_has_local_ebase feature since some types of MIPS CPU
need a per-CPU tlb_refill_handler().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongbing Hu <huhb@lemote.com>
Acked-by: David Daney <david.daney@cavium.com>
Patchwork: http://patchwork.linux-mips.org/patch/4994/
Acked-by: John Crispin <blogic@openwrt.org>
The Kconfig symbol MIPS_DISABLE_OBSOLETE_IDE was added in v2.6.10. It
has never been used. Let's remove it.
The symbol was originally introduced by the following commit
commit 2bfa662b64a7ee593f3039c1d3fd81a7766a63cd
Author: Pete Popov <ppopov@embeddedalley.com>
Date: Tue Oct 12 06:24:19 2004 +0000
- Db1550 bug fixes
- updated defconfig
- updated Kconfig to use DMA_COHERENT since new silicon is coherent
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Patchwork: http://patchwork.linux-mips.org/patch/5064/
Acked-by: John Crispin <blogic@openwrt.org>
The Kconfig symbol MIPS_BOARDS_GEN is unused since v2.6.27. It should
now be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Patchwork: http://patchwork.linux-mips.org/patch/5063/
Acked-by: John Crispin <blogic@openwrt.org>
The support for PB1100, PB1500, and PB1550 got merged into the code for
DB1000 and DB1550 code in v3.7. When that was done the three related
Kconfig symbols were dropped. But not all related Kconfig macros were
removed. Do so now.
Note that the PB1100 code in the Au1100 LCD driver is removed entirely
and not converted to use its current Kconfig macro. That is done because
the macros it uses (PB1100_G_CONTROL, PB1100_G_CONTROL_BL, and
PB1100_G_CONTROL_VDD) are never defined. Actually only one of these was
ever defined (PB1100_G_CONTROL) but that define was removed in v2.6.34.
So, as far as I can tell, this code could have never compiled.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Patchwork: http://patchwork.linux-mips.org/patch/5040/
Acked-by: John Crispin <blogic@openwrt.org>
The commit c783390a0e [MIPS: oprofile:
Support for XLR/XLS processors] causes a compilation failure when
oprofile is enabled and SMP is not configured.
arch/mips/oprofile/op_model_mipsxx.c: In function 'mipsxx_cpu_setup':
arch/mips/oprofile/op_model_mipsxx.c:181:2: error: implicit declaration of function 'cpu_logical_map'
To fix this, update oprofile_skip_cpu to not call cpu_logical_map when
CONFIG_SMP is not defined.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5037/
Acked-by: John Crispin <blogic@openwrt.org>
The definitions are not used anywhere else, and merging it will
make adding the new USB definitions for XLPII series easier.
While there, cleanup some whitespace in usb-init.c. There is no
change to logic due to this commit.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5027/
Acked-by: John Crispin <blogic@openwrt.org>
This enables us to have a default device tree per SoC family to be built
into the kernel. The default device tree for XLP3xx has been added as part
of this change. Later this can be used to provide support default boards
for XLP2xx and XLP9xx SoCs.
Kconfig options are provided for each default device tree so that just the
needed ones can be selected to be built into the kernel.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5023/
Acked-by: John Crispin <blogic@openwrt.org>
Remove unused functions and redundant comments from
arch/mips/include/asm/netlogic/haldefs.h
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5029/
Acked-by: John Crispin <blogic@openwrt.org>
Update asm/netlogic/haldefs.h to extend register access functions
nlm_{read,write}_reg64() for 32-bit compilation. When compiled for 32-bit
the functions will read 64 IO registers with interrupts disabled.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5026/
Acked-by: John Crispin <blogic@openwrt.org>
The index for a device interrupt in the PIC interrupt routing table
changes for different chips in the XLP family. Avoid using the fixed
entries and derive the index value from the SoC device header.
Add workarounds for some devices which do not report the IRT index
correctly.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5025/
Acked-by: John Crispin <blogic@openwrt.org>
Use standard function to print cpumask. Also fixup the name of the
variable used and make it static.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5024/
Acked-by: John Crispin <blogic@openwrt.org>
Remove the definitions of {read,write}_c0_{eirr,eimr}. These functions
are now unused after the PIC and IRQ code has been updated to use
optimized EIMR/EIRR functions which work on both 32-bit and 64-bit.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5021/
Acked-by: John Crispin <blogic@openwrt.org>
Remove the irq save/restore from write_c0_eimr(), as it is always called
with interrupts off.
This allows us to remove workaround in write_c0_eimr() to fix up the
flags used by local_irq_save. This fixup worked on XLR, but will break
when 32-bit support is added to r2 cpus like XLP.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5022/
Acked-by: John Crispin <blogic@openwrt.org>
All the header file does is provide the internal structure of clk,
which shouldn't be used by anyone except clk.c itself anyway.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patchwork: http://patchwork.linux-mips.org/patch/5055/
Acked-by: John Crispin <blogic@openwrt.org>
BCM6362 support booting from SPI flash and NAND.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5012/
Acked-by: John Crispin <blogic@openwrt.org>
The PCIe controller is almost the same as the BCM6328 one, with only
the SERDES register being at a different location.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5011/
Acked-by: John Crispin <blogic@openwrt.org>
Jonas Gorski