Devices newer then VEGA10/12 shall have these programming sequences performed by PSP BL
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
max range of the agp aperture is 48 bits, so
enlarge agp_start address into 48bit with all bits set
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
currently using TMR loading VCN fw MMSCH would fail
to init after FLR, just disable ib test for temporarily
daily testing, continuing debug with mm team.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This workaround does not affect other asics because amdgpu only need expose
one gfx sched to user for now.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DF routines to arm xGMI performance will attempt to re-arm both on
performance monitoring start and read on initial failure to arm.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During DF C-State, Perfmon counters outside of range 1D700-1D7FF will
encounter SLVERR affecting xGMI performance monitoring. PerfmonCtr[7:4]
is being added to avoid SLVERR during read since it falls within this
range. PerfmonCtl[7:4] is being added in order to arm PerfmonCtr[7:4].
Since PerfmonCtl[7:4] exists outside of range 1D700-1D7FF, DF routines
will be enabled to opportunistically re-arm PerfmonCtl[7:4] on retry
after SLVERR.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify padding calculations.
v2: Comment update and spacing.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk driver would like to know the num_cp_queues data, however this data relied
on different asic specific. So it's better to get it from kfd driver.
v2: don't update name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thunk driver would like to know the num_sdma_queues_per_engine data, however
this data relied on different asic specific. So it's better to get it from kfd
driver.
v2: don't update the name size.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under sriov, the disable operation is no allowed.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: compared to bare-metal: sriov support psp loading VCN firmware; only one
encoding ring would be used in each instance.
v2: keep unchange for bare-metal VCN2.5 hw_init, just add a flag with sriov
and also remove multiple lines.
v3: squash in warning fix
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: skip gating in serveral called functions by power gating and clock gating
v2: from suggestion, skip setting gate in both set function, which is where
it being called.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously there is no VCN1 type ID in psp gfx interface. Also add VCN ip
block type unless the reinit after FLR for sriov would fail.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MMSCH V1 to finish Memory Controller
programming as well as start MMSCH to do
VCN2.5 initialization.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use MMSCH to do the initialization since MMSCH
manages VCN2.5 instances and its world switch.
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Code refactor and no functional change.
Fixes: 4cf781c24c ("drm/amdgpu: Added RAS UMC error query support for Arcturus")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For udelay. This is needed for some platforms.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This table is used for lots of things, add it's own lock.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this set adds support for removal of gpu drm dead code.
patch3 is similar with patch 1:
`num` is a data of u8 type and ATOM_MAX_HW_I2C_READ == 255,
so there is a impossible condition '(num > 255) => (0-255 > 255)'.
Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a safety check to runtime suspend to make sure all outstanding
fences have signaled before we suspend. Doesn't fix any known issue.
We already do this via the fence driver suspend function, but we
just force completion rather than bailing. This bails on runtime
suspend so we can try again later once the fences are signaled to
avoid missing any outstanding work.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to avoid queueing jobs to same CPU during XGMI hive reset
because there is a strict timeline for when the reset commands
must reach all the GPUs in the hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use task barrier in XGMI hive to synchronize ASIC resets
across devices in XGMI hive.
v2: Return right away with a warning if no xgmi hive, update doc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is used to synchronize N threads at a rendevouz point before execution
of critical code that has to be started by all the threads at approximatly
the same time.
v2: Remove mention of reset use case, improve doc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation for doing XGMI reset synchronization using task barrier.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Esp. VCN1.0 headers should not be here
v2: add back the <linux/module.h> to keep consistent.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issues:
MEC is ruined by the amdkfd_pre_reset after VF FLR done
fix:
amdkfd_pre_reset() would ruin MEC after hypervisor finished the VF FLR,
the correct sequence is do amdkfd_pre_reset before VF FLR but there is
a limitation to block this sequence:
if we do pre_reset() before VF FLR, it would go KIQ way to do register
access and stuck there, because KIQ probably won't work by that time
(e.g. you already made GFX hang)
so the best way right now is to simply remove it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issues:
gpu_recover() is re-entered by the mailbox interrupt
handler mxgpu_nv.c
fix:
we need to bypass the gpu_recover() invoke in mailbox
interrupt as long as the timeout is not infinite (thus the TDR
will be triggered automatically after time out, no need to invoke
gpu_recover() through mailbox interrupt.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under sriov pp one vf mode, there is no need to set
soc clk under pp one vf because smu firmware will depend
on the mclk to set the appropriate soc clk for it.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by : Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
entity should not keep copy and maintain sched list for
itself.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This sched array can be passed on to entity creation routine
instead of manually creating such sched array on every context creation.
v2: squash in missing break fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_sched_entity_init() takes drm gpu scheduler list instead of
drm_sched_rq list. This makes conversion of drm_sched_rq list
to drm gpu scheduler list unnecessary
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Entity currently keeps a copy of run_queue list and modify it in
drm_sched_entity_set_priority(). Entities shouldn't modify run_queue
list. Use drm_gpu_scheduler list instead of drm_sched_rq list
in drm_sched_entity struct. In this way we can select a runqueue based
on entity/ctx's priority for a drm scheduler.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increment the usage count in emit fence, and decrement in
process fence to make sure the GPU is always considered in
use while there are fences outstanding. We always wait for
the engines to drain in runtime suspend, but in practice
that only covers short lived jobs for gfx. This should
cover us for longer lived fences.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU watermark table (WMTABLE) validity check is missing on Renoir.
This validity check is very useful for checking whether
WMTABLE is updated successfully.
[How]
Add SMU watermark validity check.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already did this for older generations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already did this for older generations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It's required for debug purposes.
[how]
Add a dsc_bpp_increment_div debug option that overrides DPCD
BITS_PER_PIXEL_INCREMENT value. The value dsc_bpp_increment_div should
be set to is the one after parsing, i.e. it could be 1, 2, 4, 8 or 16
(meaning 1pix, 1/2pix, ..., 1/16pix).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
eDP is internal link and link loss is unexpected.
It is typically going to be PSR related errors, which is
handled separately.
[How]
Check for eDP and skip check for link loss
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor disappears for some SLS displays that are rotated 180
and 270 degrees. This occurs when there is no pipe split being
done ( ex. 3 or more displays ). The cursor calculations assume
pipe splitting is done so when it calculates the new cursor
position in hwss.set_cursor_position(), it is out-of-bounds so
it disables the cursor in hubp.set_cursor_position().
[How]
In non pipe split cases, calculate cursor using viewport size
( width or height ) instead of viewport size * 2 ( the two
because pipe splitting divides the rectangle into two ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous formula for calculating DPP CLK DTO was
hard to understand.
[How]
Replace with easier to understand formula that produces
same results.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements