Use the builtin_platform_driver() to simplify code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
__dma_* routines have been converted to use start and size instread of
start and end addresses. The patch was origianlly for adding
__clean_dcache_area_poc() which will be used in pmem driver to clean
dcache to the PoC(Point of Coherency) in arch_wb_cache_pmem().
The functionality of __clean_dcache_area_poc() was equivalent to
__dma_clean_range(). The difference was __dma_clean_range() uses the end
address, but __clean_dcache_area_poc() uses the size to clean.
Thus, __clean_dcache_area_poc() has been revised with a fallthrough
function of __dma_clean_range() after the change that __dma_* routines
use start and size instead of using start and end.
As a consequence of using start and size, the name of __dma_* routines
has also been altered following the terminology below:
area: takes a start and size
range: takes a start and end
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently ret_fast_syscall, work_pending, and ret_to_user form an ad-hoc
state machine that can be difficult to reason about due to duplicated
code and a large number of branch targets.
This patch factors the common logic out into the existing
do_notify_resume function, converting the code to C in the process,
making the code more legible.
This patch tries to closely mirror the existing behaviour while using
the usual C control flow primitives. As local_irq_{disable,enable} may
be instrumented, we balance exception entry (where we will almost most
likely enable IRQs) with a call to trace_hardirqs_on just before the
return to userspace.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In break_before_make_ttbr_switch we perform broadcast TLB maintenance
for the inner shareable domain, and use a DSB ISH to complete this.
However, at the point we execute this, secondary CPUs are either
physically offline, or executing code outside of the kernel. Upon
entering the kernel, secondary CPUs will invalidate their TLBs before
enabling their MMUs.
Thus we do not need to invalidate TLBs of other CPUs, and as with
idmap_cpu_replace_ttbr1 we can reduce the scope of maintenance to the
TLBs of the local CPU. This keeps our TLB maintenance code consistent,
and is a minor optimisation.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When building with 48-bit VAs and 16K page configuration, it's possible
to get the following warning when building the arm64 page table dumping
code:
arch/arm64/mm/dump.c: In function ‘walk_pud’:
arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow]
This is because pud_offset(pgd, 0) performs a shift to the right by 36
while the value 0 has the type 'int' by default, therefore 32-bit.
This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to
use 0UL for the address argument.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXtLicAAoJEEtpOizt6ddyEC4H/16IngntN6Gz1WPwtBBelgyj
ZfU970uzGOyDtDOeOX1NT+gJpkDvUMhsNlngWnMrMwqqqPVKdE4XBShPiW2v53E7
JquDTd2kKl+OO9e9XnkLw9yUcARmJFKIjHdISlg+E78t2kcNHn+XB2jrfTLKQVl8
tk1ztDALb4LXSGYPZQ/uHTYp9U0qei+2SbbQufRcdQ3ggyxLDwPP2aO25amctzEP
0Y42tlnNoZj7yBBp0X9BWRrHF2AZuOp+qBJnpFiQdsgLL6G1P3DcU/t9+KDjVBVr
LYKN8jId2r5eyGGg8aKb4I3trevayToWhDw/jzarrTNAovB1cp8G5J7ozfmeS3g=
=4PCW
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for v4.8-rc3
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
Literal loads of virtual addresses are subject to runtime relocation when
CONFIG_RELOCATABLE=y, and given that the relocation routines run with the
MMU and caches enabled, literal loads of relocated values performed with
the MMU off are not guaranteed to return the latest value unless the
memory covering the literal is cleaned to the PoC explicitly.
So defer the literal load until after the MMU has been enabled, just like
we do for primary_switch() and secondary_switch() in head.S.
Fixes: 1e48ef7fcc ("arm64: add support for building vmlinux as a relocatable PIE binary")
Cc: <stable@vger.kernel.org> # 4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since asm/acpi.h is only included by linux/acpi.h when CONFIG_ACPI is
enabled, disabling the latter leads to the following build error on
arm64:
arch/arm64/mm/numa.c: In function ‘arm64_numa_init’:
arch/arm64/mm/numa.c:395:24: error: ‘arm64_acpi_numa_init’ undeclared (first use in this function)
if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))
This patch include the asm/acpi.h explicitly in arch/arm64/mm/numa.c for
the arm64_acpi_numa_init() definition.
Fixes: d8b47fca8c ("arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT")
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the
configured SRE value") we report SRE value to 64-bit guest, but 32-bit
one still handled as RAZ/WI what leads to funny promise we do not keep:
"GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead"
Instead, return the actual value of the ICC_SRE_EL1 register that the
guest should see.
[ Tweaked commit message - Christoffer ]
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Comment about how PMU access is handled is not relavant since v4.6
where proper PMU support was added in.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We already have a workaround for Cortex-A57 erratum #852523,
but Cortex-A72 r0p0 to r0p2 do suffer from the same issue
(known as erratum #853709).
Let's document the fact that we already handle this.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This patch fixes the backward compatibility when used with older kernel.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added rxlos GPIO mapping by adding rxlos-gpios property.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).
During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.
This is a default y option, so drop the unset to enable it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.
- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.
Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page(), we create a copy of the hibernate exit text,
along with some page tables to map this via TTBR0. We then install the
new tables in TTBR0.
In swsusp_arch_resume() we call create_safe_exec_page() before trying a
number of operations which may fail (e.g. copying the linear map page
tables). If these fail, we bail out of swsusp_arch_resume() and return
an error code, but leave TTBR0 as-is. Subsequently, the core hibernate
code will call free_basic_memory_bitmaps(), which will free all of the
memory allocations we made, including the page tables installed in
TTBR0.
Thus, we may have TTBR0 pointing at dangling freed memory for some
period of time. If the hibernate attempt was triggered by a user
requesting a hibernate test via the reboot syscall, we may return to
userspace with the clobbered TTBR0 value.
Avoid these issues by reorganising swsusp_arch_resume() such that we
have no failure paths after create_safe_exec_page(). We also add a check
that the zero page allocation succeeded, matching what we have for other
allocations.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page we install a set of global mappings in TTBR0,
then subsequently invalidate TLBs. While TTBR0 points at the zero page,
and the TLBs should be free of stale global entries, we may have stale
ASID-tagged entries (e.g. from the EFI runtime services mappings) for
the same VAs. Per the ARM ARM these ASID-tagged entries may conflict
with newly-allocated global entries, and we must follow a
Break-Before-Make approach to avoid issues resulting from this.
This patch reworks create_safe_exec_page to invalidate TLBs while the
zero page is still in place, ensuring that there are no potential
conflicts when the new TTBR0 value is installed. As a single CPU is
online while this code executes, we do not need to perform broadcast TLB
maintenance, and can call local_flush_tlb_all(), which also subsumes
some barriers. The remaining assembly is converted to use write_sysreg()
and isb().
Other than this, we safely manipulate TTBRs in the hibernate dance. The
code we install as part of the new TTBR0 mapping (the hibernated
kernel's swsusp_arch_suspend_exit) installs a zero page into TTBR1,
invalidates TLBs, then installs its preferred value. Upon being restored
to the middle of swsusp_arch_suspend, the new image will call
__cpu_suspend_exit, which will call cpu_uninstall_idmap, installing the
zero page in TTBR0 and invalidating all TLB entries.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Executing from a non-executable area gives an ugly message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0e08
lkdtm: attempting bad execution at ffff000008880700
Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL)
CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13
Hardware name: linux,dummy-virt (DT)
task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
The 'IABT (current EL)' indicates the error but it's a bit cryptic
without knowledge of the ARM ARM. There is also no indication of the
specific address which triggered the fault. The increase in kernel
page permissions makes hitting this case more likely as well.
Handling the case in the vectors gives a much more familiar looking
error message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0840
lkdtm: attempting bad execution at ffff000008880680
Unable to handle kernel paging request at virtual address ffff000008880680
pgd = ffff8000089b2000
[ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000
Internal error: Oops: 8400000e [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24
Hardware name: linux,dummy-virt (DT)
task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A couple of bug fixes have come in for v4.8 so far. Since the first few were
originally meant to go into -rc1 (but didn't get sent in time for travel
reasons), the branch is unfortunately based on top of a commit in the
middle of the merge window rather than -rc1.
Content-wise we have
- A fix for the last remaining broken build in kernelci,
getting mach-shmobile to build again with SMP disabled
- A fix for a realview regression that broke real hardware but
not the qemu model that everyone uses in practice (needed
for v4.7 as well)
- A merge conflict fix for Tegra that also broke v4.7
- Two Kconfig fixes for arm64 build regressions
- A couple of arm32 build warning fixes (all harmless)
- Fixing the RTC on Exynos7 Espresso (which apparently
never worked right)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n3Zs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.
Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:
warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
has unmet direct dependencies (PCI && PCI_MSI)
This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.
Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
dependencies (PCI)
This patch makes selection of ALPINE_MSI conditional on PCI.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the hard limit of cpu count by set boot options nr_cpus=x
on arm64, and make a minor change about message when total number
of cpu exceeds the limit.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: Shiyuan Hu <hushiyuan@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
Cc: Michael Büsch <m@bues.ch>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* x86 nested virt tweak and OOPS fix
* Simplify pvclock code (vdso bits acked by Andy Lutomirski).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXpKOnAAoJEL/70l94x66D5z4H/R2660Vy3brQrI8lGxCtkXJt
AVe8PwI8nDfYJ/UkMZ2KcHPSvy+sHW2ydaZXYNqXHVBeTaUxiPW9rTgK61ebypGL
1tPOgJ3kGZF6XEdAz6gS8LniNFc+D3W6Y6sRylkEsqPj39/hxe7QMoOMSCQ9imbW
WMIx7/81i1EMw6oi+9FVtq+yHCpvyfFnD8t1TDsYWOReVn1J15SxbEs4Ih+hBMLz
HZ5DEjp9cAmzeR7GLje5eH1t6TEEoNb1MNgFWuscoAsDf8D9DKqRB9s0hC+TLFYn
oZbGSqjQwu3/VMblgedinH6X9MTm8V0zW29ToGnDcoO00AUmdlNmXSaZUhvT/Rs=
=H5cD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
- ARM bugfix and MSI injection support
- x86 nested virt tweak and OOPS fix
- Simplify pvclock code (vdso bits acked by Andy Lutomirski).
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
nvmx: mark ept single context invalidation as supported
nvmx: remove comment about missing nested vpid support
KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
KVM: documentation: fix KVM_CAP_X2APIC_API information
x86: vdso: use __pvclock_read_cycles
pvclock: introduce seqcount-like API
arm64: KVM: Set cpsr before spsr on fault injection
KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
KVM: arm/arm64: Enable MSI routing
KVM: arm/arm64: Enable irqchip routing
KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
KVM: irqchip: Convey devid to kvm_set_msi
KVM: Add devid in kvm_kernel_irq_routing_entry
KVM: api: Pass the devid in the msi routing entry
- Fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
- Avoid accessing unmapped FDT fields when checking validity
- Correctly account for vDSO AUX entry in ARCH_DLINFO
- Fix kallsyms with absolute expressions in linker script
- Kill unnecessary symbol-based relocs in vmlinux
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJXpFZ5AAoJELescNyEwWM0PI4IALsTuHRzClOSMDLiqMUj8t+5
WNAcqybxAjCOVxAHckhweju++TeJBxcRH1nvBoNwiHIdHTv4fq1TZ3PeEq9kWMg5
JbKjYjvd9dW8k6LXMya8iXCYtG3kzbNejkNpOTVebC86yvas1IiEjNb/ztPdhJeM
HBSOkhfk8RcskfNxhuscZzGXbbdH9/R+XSTNRHN/RwCZH8PlInmduD9BbMvDhZyP
NLFonD2IgQ4as1kYG/HdIcw0BamHiURjd043+gyoqMvm7JjPksRzlQnr91SMkX17
LykXjHYPi2Me3aTrZ1NtkUNd5FHLHZ6/b9Wg6nA19d5KWkd3ER9uSJqGxkkbnt0=
=dtGK
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
- avoid accessing unmapped FDT fields when checking validity
- correctly account for vDSO AUX entry in ARCH_DLINFO
- fix kallsyms with absolute expressions in linker script
- kill unnecessary symbol-based relocs in vmlinux
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix copy-on-write referencing in HugeTLB
arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before
writing the entry to the table.
This can cause problems with the copy-on-write logic in hugetlb_cow:
*) hugetlb_cow(.) called to handle a write fault on read only pte,
*) Before the copy-on-write updates the new page table a call is
made to pte_same(huge_ptep_get(ptep), pte)), to check for a race,
*) Because set_pte_at(.) changed the pte, *ptep != pte, and the
hugetlb_cow(.) code erroneously assumes that it lost the race,
*) The new page is subsequently freed without being used.
On arm64 this problem only becomes apparent when we apply:
67961f9 mm/hugetlb: fix huge page reserve accounting for private
mappings
When one runs the libhugetlbfs test suite, there are allocation errors
and hugetlbfs pages become erroneously locked in memory as reserved.
(There is a high HugePages_Rsvd: count).
In this patch we introduce pte_same which ignores the PTE_RDONLY bit,
allowing for the libhugetlbfs test suite to pass as expected and
without leaking any reserved HugeTLB pages.
Reported-by: Huang Shijie <shijie.huang@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Includes GSI routing support to go along with the new VGIC and a small fix that
has been cooking in -next for a while.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXoydqAAoJEEtpOizt6ddyM3oH/1A4VeG/J9q4fBPXqY2tVWXs
c3P7UgNcrEgUNs/F9ykQY/lb31deecUzaBt1OyTf+RlsNbihq3dQdYcBhxtUODw/
Faok582ya3UFgLW+IRHcID0EbkVOpIzMhOStYsnU/Dz7HG1JL9HdPzwkid7iu9LT
fI6yrrBnJFjdWAAQ4BkcEKBENRsY8NTs7jX5vnFA92MkUBby7BmariPDD3FtrB+f
Ob9B7CxM30pNqsN7OA/QvFOHMJHxf3s1TBKwmPHe5TLIfSzV1YxcEGiMc0lWqF4v
BT8ZeMGCtjDw94tND1DskfQQRPaMqPmGuRTrAW/IuE2n92bFtbqIqs7Cbw0fzLE=
=Vm6Q
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.8-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Changes for v4.8 - Take 2
Includes GSI routing support to go along with the new VGIC and a small fix that
has been cooking in -next for a while.
Pull kbuild updates from Michal Marek:
- GCC plugin support by Emese Revfy from grsecurity, with a fixup from
Kees Cook. The plugins are meant to be used for static analysis of
the kernel code. Two plugins are provided already.
- reduction of the gcc commandline by Arnd Bergmann.
- IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada
- bin2c fix by Michael Tautschnig
- setlocalversion fix by Wolfram Sang
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
gcc-plugins: disable under COMPILE_TEST
kbuild: Abort build on bad stack protector flag
scripts: Fix size mismatch of kexec_purgatory_size
kbuild: make samples depend on headers_install
Kbuild: don't add obj tree in additional includes
Kbuild: arch: look for generated headers in obtree
Kbuild: always prefix objtree in LINUXINCLUDE
Kbuild: avoid duplicate include path
Kbuild: don't add ../../ to include path
vmlinux.lds.h: replace config_enabled() with IS_ENABLED()
kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion
kconfig.h: use already defined macros for IS_REACHABLE() define
export.h: use __is_defined() to check if __KSYM_* is defined
kconfig.h: use __is_defined() to check if MODULE is defined
kbuild: setlocalversion: print error to STDERR
Add sancov plugin
Add Cyclomatic complexity GCC plugin
GCC plugin infrastructure
Shared library support
VGIC implementation.
- s390: support for trapping software breakpoints, nested virtualization
(vSIE), the STHYI opcode, initial extensions for CPU model support.
- MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups,
preliminary to this and the upcoming support for hardware virtualization
extensions.
- x86: support for execute-only mappings in nested EPT; reduced vmexit
latency for TSC deadline timer (by about 30%) on Intel hosts; support for
more than 255 vCPUs.
- PPC: bugfixes.
The ugly bit is the conflicts. A couple of them are simple conflicts due
to 4.7 fixes, but most of them are with other trees. There was definitely
too much reliance on Acked-by here. Some conflicts are for KVM patches
where _I_ gave my Acked-by, but the worst are for this pull request's
patches that touch files outside arch/*/kvm. KVM submaintainers should
probably learn to synchronize better with arch maintainers, with the
latter providing topic branches whenever possible instead of Acked-by.
This is what we do with arch/x86. And I should learn to refuse pull
requests when linux-next sends scary signals, even if that means that
submaintainers have to rebase their branches.
Anyhow, here's the list:
- arch/x86/kvm/vmx.c: handle_pcommit and EXIT_REASON_PCOMMIT was removed
by the nvdimm tree. This tree adds handle_preemption_timer and
EXIT_REASON_PREEMPTION_TIMER at the same place. In general all mentions
of pcommit have to go.
There is also a conflict between a stable fix and this patch, where the
stable fix removed the vmx_create_pml_buffer function and its call.
- virt/kvm/kvm_main.c: kvm_cpu_notifier was removed by the hotplug tree.
This tree adds kvm_io_bus_get_dev at the same place.
- virt/kvm/arm/vgic.c: a few final bugfixes went into 4.7 before the
file was completely removed for 4.8.
- include/linux/irqchip/arm-gic-v3.h: this one is entirely our fault;
this is a change that should have gone in through the irqchip tree and
pulled by kvm-arm. I think I would have rejected this kvm-arm pull
request. The KVM version is the right one, except that it lacks
GITS_BASER_PAGES_SHIFT.
- arch/powerpc: what a mess. For the idle_book3s.S conflict, the KVM
tree is the right one; everything else is trivial. In this case I am
not quite sure what went wrong. The commit that is causing the mess
(fd7bacbca4, "KVM: PPC: Book3S HV: Fix TB corruption in guest exit
path on HMI interrupt", 2016-05-15) touches both arch/powerpc/kernel/
and arch/powerpc/kvm/. It's large, but at 396 insertions/5 deletions
I guessed that it wasn't really possible to split it and that the 5
deletions wouldn't conflict. That wasn't the case.
- arch/s390: also messy. First is hypfs_diag.c where the KVM tree
moved some code and the s390 tree patched it. You have to reapply the
relevant part of commits 6c22c98637, plus all of e030c1125e, to
arch/s390/kernel/diag.c. Or pick the linux-next conflict
resolution from http://marc.info/?l=kvm&m=146717549531603&w=2.
Second, there is a conflict in gmap.c between a stable fix and 4.8.
The KVM version here is the correct one.
I have pushed my resolution at refs/heads/merge-20160802 (commit
3d1f53419842) at git://git.kernel.org/pub/scm/virt/kvm/kvm.git.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXoGm7AAoJEL/70l94x66DugQIAIj703ePAFepB/fCrKHkZZia
SGrsBdvAtNsOhr7FQ5qvvjLxiv/cv7CymeuJivX8H+4kuUHUllDzey+RPHYHD9X7
U6n1PdCH9F15a3IXc8tDjlDdOMNIKJixYuq1UyNZMU6NFwl00+TZf9JF8A2US65b
x/41W98ilL6nNBAsoDVmCLtPNWAqQ3lajaZELGfcqRQ9ZGKcAYOaLFXHv2YHf2XC
qIDMf+slBGSQ66UoATnYV2gAopNlWbZ7n0vO6tE2KyvhHZ1m399aBX1+k8la/0JI
69r+Tz7ZHUSFtmlmyByi5IAB87myy2WQHyAPwj+4vwJkDGPcl0TrupzbG7+T05Y=
=42ti
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
- ARM: GICv3 ITS emulation and various fixes. Removal of the
old VGIC implementation.
- s390: support for trapping software breakpoints, nested
virtualization (vSIE), the STHYI opcode, initial extensions
for CPU model support.
- MIPS: support for MIPS64 hosts (32-bit guests only) and lots
of cleanups, preliminary to this and the upcoming support for
hardware virtualization extensions.
- x86: support for execute-only mappings in nested EPT; reduced
vmexit latency for TSC deadline timer (by about 30%) on Intel
hosts; support for more than 255 vCPUs.
- PPC: bugfixes.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
KVM: PPC: Introduce KVM_CAP_PPC_HTM
MIPS: Select HAVE_KVM for MIPS64_R{2,6}
MIPS: KVM: Reset CP0_PageMask during host TLB flush
MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
MIPS: KVM: Sign extend MFC0/RDHWR results
MIPS: KVM: Fix 64-bit big endian dynamic translation
MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
MIPS: KVM: Use 64-bit CP0_EBase when appropriate
MIPS: KVM: Set CP0_Status.KX on MIPS64
MIPS: KVM: Make entry code MIPS64 friendly
MIPS: KVM: Use kmap instead of CKSEG0ADDR()
MIPS: KVM: Use virt_to_phys() to get commpage PFN
MIPS: Fix definition of KSEGX() for 64-bit
KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
kvm: x86: nVMX: maintain internal copy of current VMCS
KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
KVM: arm64: vgic-its: Simplify MAPI error handling
KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
...
Add RTC source clock as Exynos7 needs source (32.768KHz) clock
for RTC block. Without this currently S3C RTC driver probe is broken
on this SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
Changes to platform code for 64-bit ARM platforms.
Nearlt all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vsam
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull 64-bit ARM SoC updates from Olof Johansson:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Added platforms for this release are:
- Broadcom BCM2837
- Renesas R8A7796"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: remove duplicate PWM entry in defconfig
arm64: Update default configuration
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
arm64: amlogic: select gxbb clk driver
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
arm64: marvell: enable Armada 3700 clock drivers
arm64: defconfig: enable msm8996 pinctrl support
arm64: defconfig: Enable qcom msm8996 clk drivers
arm: defconfig: Enable PM8941 pwr key
arm64: defconfig: enable stmmac and realtek PHY as modules
arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
arm64: configs: enable PCIe driver for Armada 7K/8K
arm64: Add platform selection for BCM2835.
arm64: defconfig: disable plain NEON implementation of AES
arm64: Allow for different DMA and CPU bus offsets
arm64: defconfig: enable Renesas R8A7796 SoC
arm64: defconfig: Enable Cadence MACB/GEM support
ARM64: Kconfig: Select the Amlogic Meson pin controller driver
...
* pci/host-aardvark:
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
* pci/host-altera:
PCI: altera: Poll for link up status after retraining the link
PCI: altera: Check link status before retrain link
PCI: altera: Reorder read/write functions
* pci/host-dra7xx:
PCI: dra7xx: Fix return value in case of error
* pci/host-hv:
PCI: hv: Fix interrupt cleanup path
PCI: hv: Handle all pending messages in hv_pci_onchannelcallback()
PCI: hv: Don't leak buffer in hv_pci_onchannelcallback()
* pci/host-vmd:
x86/PCI: VMD: Separate MSI and MSI-X vector sharing
x86/PCI: VMD: Use x86_vector_domain as parent domain
x86/PCI: VMD: Use lock save/restore in interrupt enable path
x86/PCI: VMD: Initialize list item in IRQ disable
x86/PCI: VMD: Select device dma ops to override
* pci/host-xilinx:
PCI: xilinx: Fix return value in case of error
Manually apply changes from pci/demodularize-hosts and
pci/host-request-windows to drivers/pci/host/pci-aardvark.c
* pci/resource:
unicore32/PCI: Remove pci=firmware command line parameter handling
ARM/PCI: Remove arch-specific pcibios_enable_device()
ARM64/PCI: Remove arch-specific pcibios_enable_device()
MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups
PCI: Add generic pci_bus_claim_resources()
alx: Use pci_(request|release)_mem_regions
ethernet/intel: Use pci_(request|release)_mem_regions
GenWQE: Use pci_(request|release)_mem_regions
lpfc: Use pci_(request|release)_mem_regions
NVMe: Use pci_(request|release)_mem_regions
PCI: Add helpers to request/release memory and I/O regions
PCI: Extending pci=resource_alignment to specify device/vendor IDs
sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
PCI: Unify pci_resource_to_user() declarations
microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
powerpc/pci: Remove __pci_mmap_set_pgprot()
PCI: Ignore write combining when mapping I/O port space
* pci/aspm:
PCI/ASPM: Remove redundant check of pcie_set_clkpm
* pci/dpc:
PCI: Remove DPC tristate module option
PCI: Bind DPC to Root Ports as well as Downstream Ports
PCI: Fix whitespace in struct dpc_dev
PCI: Convert Downstream Port Containment driver to use devm_* functions
* pci/hotplug:
PCI: Allow additional bus numbers for hotplug bridges
* pci/misc:
PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
PCI: Make bus_attr_resource_alignment static
MAINTAINERS: Add file patterns for PCI device tree bindings
PCI: Fix comment typo
* pci/msi:
PCI/MSI: irqchip: Fix PCI_MSI dependencies
* pci/pm:
PCI: pciehp: Ignore interrupts during D3cold
PCI: Document connection between pci_power_t and hardware PM capability
PCI: Add runtime PM support for PCIe ports
ACPI / hotplug / PCI: Runtime resume bridge before rescan
PCI: Power on bridges before scanning new devices
PCI: Put PCIe ports into D3 during suspend
PCI: Don't clear d3cold_allowed for PCIe ports
PCI / PM: Enforce type casting for pci_power_t
* pci/virtualization:
PCI: Add ACS quirk for Solarflare SFC9220
PCI: Add DMA alias quirk for Adaptec 3805
PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
We need to set cpsr before determining the spsr bank, as the bank
depends on the target exception level of the injection, not the
current mode of the vcpu. Normally this is one in the same (EL1),
but not when we manage to trap an EL0 fault. It still doesn't really
matter for the 64-bit EL0 case though, as vcpu_spsr() unconditionally
uses the EL1 bank for that. However the 32-bit EL0 case gets fun, as
that path will lead to the BUG() in vcpu_spsr32().
This patch fixes the assignment order and also modifies some white
space in order to better group pairs of lines that have strict order.
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
As reported by Zijun, the fdt_check_header() call in __fixmap_remap_fdt()
is not safe since it is not guaranteed that the FDT header is mapped
completely. Due to the minimum alignment of 8 bytes, the only fields we
can assume to be mapped are 'magic' and 'totalsize'.
Since the OF layer is in charge of validating the FDT image, and we are
only interested in making reasonably sure that the size field contains
a meaningful value, replace the fdt_check_header() call with an explicit
comparison of the magic field's value against the expected value.
Cc: <stable@vger.kernel.org>
Reported-by: Zijun Hu <zijun_hu@htc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
- Removal of most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to call
it if they have special needs.
- Use pr_fmt on all the DT core print statements.
- CoreSight binding doc improvements to block name descriptions.
- Add dt_to_config script which can parse dts files and list
corresponding kernel config options.
- Fix memory leak hit with a PowerMac DT.
- Correct a bunch of STMicro compatible strings to use the correct
vendor prefix.
- Fix DA9052 PMIC binding doc to match what is actually used in dts
files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wLMr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- remove most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to
call it if they have special needs
- use pr_fmt on all the DT core print statements
- CoreSight binding doc improvements to block name descriptions
- add dt_to_config script which can parse dts files and list
corresponding kernel config options
- fix memory leak hit with a PowerMac DT
- correct a bunch of STMicro compatible strings to use the correct
vendor prefix
- fix DA9052 PMIC binding doc to match what is actually used in dts
files
* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
xtensa: Fix build error due to missing include file
MIPS: ath79: Add missing include file
Fix spelling errors in Documentation/devicetree
ARM: dts: fix STMicroelectronics compatible strings
powerpc/dts: fix STMicroelectronics compatible strings
Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
scripts/dtc: dt_to_config - kernel config options for a devicetree
of: fdt: mark unflattened tree as detached
of: overlay: add resolver error prints
coresight: document binding acronyms
Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
of: use pr_fmt prefix for all console printing
of/irq: Mark initialised interrupt controllers as populated
of: fix memory leak related to safe_name()
Revert "of/platform: export of_default_bus_match_table"
of: unittest: use of_platform_default_populate() to populate default bus
memory: omap-gpmc: use of_platform_default_populate() to populate default bus
bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
...
Pull security subsystem updates from James Morris:
"Highlights:
- TPM core and driver updates/fixes
- IPv6 security labeling (CALIPSO)
- Lots of Apparmor fixes
- Seccomp: remove 2-phase API, close hole where ptrace can change
syscall #"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
tpm: Factor out common startup code
tpm: use devm_add_action_or_reset
tpm2_i2c_nuvoton: add irq validity check
tpm: read burstcount from TPM_STS in one 32-bit transaction
tpm: fix byte-order for the value read by tpm2_get_tpm_pt
tpm_tis_core: convert max timeouts from msec to jiffies
apparmor: fix arg_size computation for when setprocattr is null terminated
apparmor: fix oops, validate buffer size in apparmor_setprocattr()
apparmor: do not expose kernel stack
apparmor: fix module parameters can be changed after policy is locked
apparmor: fix oops in profile_unpack() when policy_db is not present
apparmor: don't check for vmalloc_addr if kvzalloc() failed
apparmor: add missing id bounds check on dfa verification
apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
apparmor: use list_next_entry instead of list_entry_next
apparmor: fix refcount race when finding a child profile
apparmor: fix ref count leak when profile sha1 hash is read
apparmor: check that xindex is in trans_table bounds
...
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for arm64 at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.
This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which arm64 doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.
Fixes: f668cd1673 ("arm64: ELF definitions")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
The linker routines that we rely on to produce a relocatable PIE binary
treat it as a shared ELF object in some ways, i.e., it emits symbol based
R_AARCH64_ABS64 relocations into the final binary since doing so would be
appropriate when linking a shared library that is subject to symbol
preemption. (This means that an executable can override certain symbols
that are exported by a shared library it is linked with, and that the
shared library *must* update all its internal references as well, and point
them to the version provided by the executable.)
Symbol preemption does not occur for OS hosted PIE executables, let alone
for vmlinux, and so we would prefer to get rid of these symbol based
relocations. This would allow us to simplify the relocation routines, and
to strip the .dynsym, .dynstr and .hash sections from the binary. (Note
that these are tiny, and are placed in the .init segment, but they clutter
up the vmlinux binary.)
Note that these R_AARCH64_ABS64 relocations are only emitted for absolute
references to symbols defined in the linker script, all other relocatable
quantities are covered by anonymous R_AARCH64_RELATIVE relocations that
simply list the offsets to all 64-bit values in the binary that need to be
fixed up based on the offset between the link time and run time addresses.
Fortunately, GNU ld has a -Bsymbolic option, which is intended for shared
libraries to allow them to ignore symbol preemption, and unconditionally
bind all internal symbol references to its own definitions. So set it for
our PIE binary as well, and get rid of the asoociated sections and the
relocation code that processes them.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fixed conflict with __dynsym_offset linker script entry]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Due to the untyped KIMAGE_VADDR constant, the linker may not notice
that the __rela_offset and __dynsym_offset expressions are absolute
values (i.e., are not subject to relocation). This does not matter for
KASLR, but it does confuse kallsyms in relative mode, since it uses
the lowest non-absolute symbol address as the anchor point, and expects
all other symbol addresses to be within 4 GB of it.
Fix this by qualifying these expressions as ABSOLUTE() explicitly.
Fixes: 0cd3defe0a ("arm64: kernel: perform relocation processing from ID map")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When booting an ACPI enabled kernel with 'mem=x', there is the
possibility that ACPI data regions from the firmware will lie above the
memory limit. Ordinarily these will be removed by
memblock_enforce_memory_limit(.).
Unfortunately, this means that these regions will then be mapped by
acpi_os_ioremap(.) as device memory (instead of normal) thus unaligned
accessess will then provoke alignment faults.
In this patch we adopt memblock_mem_limit_remove_map instead, and this
preserves these ACPI data regions (marked NOMAP) thus ensuring that
these regions are not mapped as device memory.
For example, below is an alignment exception observed on ARM platform
when booting the kernel with 'acpi=on mem=8G':
...
Unable to handle kernel paging request at virtual address ffff0000080521e7
pgd = ffff000008aa0000
[ffff0000080521e7] *pgd=000000801fffe003, *pud=000000801fffd003, *pmd=000000801fffc003, *pte=00e80083ff1c1707
Internal error: Oops: 96000021 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc3-next-20160616+ #172
Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1001A 02/09/2016
task: ffff800001ef0000 ti: ffff800001ef8000 task.ti: ffff800001ef8000
PC is at acpi_ns_lookup+0x520/0x734
LR is at acpi_ns_lookup+0x4a4/0x734
pc : [<ffff0000083b8b10>] lr : [<ffff0000083b8a94>] pstate: 60000045
sp : ffff800001efb8b0
x29: ffff800001efb8c0 x28: 000000000000001b
x27: 0000000000000001 x26: 0000000000000000
x25: ffff800001efb9e8 x24: ffff000008a10000
x23: 0000000000000001 x22: 0000000000000001
x21: ffff000008724000 x20: 000000000000001b
x19: ffff0000080521e7 x18: 000000000000000d
x17: 00000000000038ff x16: 0000000000000002
x15: 0000000000000007 x14: 0000000000007fff
x13: ffffff0000000000 x12: 0000000000000018
x11: 000000001fffd200 x10: 00000000ffffff76
x9 : 000000000000005f x8 : ffff000008725fa8
x7 : ffff000008a8df70 x6 : ffff000008a8df70
x5 : ffff000008a8d000 x4 : 0000000000000010
x3 : 0000000000000010 x2 : 000000000000000c
x1 : 0000000000000006 x0 : 0000000000000000
...
acpi_ns_lookup+0x520/0x734
acpi_ds_load1_begin_op+0x174/0x4fc
acpi_ps_build_named_op+0xf8/0x220
acpi_ps_create_op+0x208/0x33c
acpi_ps_parse_loop+0x204/0x838
acpi_ps_parse_aml+0x1bc/0x42c
acpi_ns_one_complete_parse+0x1e8/0x22c
acpi_ns_parse_table+0x8c/0x128
acpi_ns_load_table+0xc0/0x1e8
acpi_tb_load_namespace+0xf8/0x2e8
acpi_load_tables+0x7c/0x110
acpi_init+0x90/0x2c0
do_one_initcall+0x38/0x12c
kernel_init_freeable+0x148/0x1ec
kernel_init+0x10/0xec
ret_from_fork+0x10/0x40
Code: b9009fbc 2a00037b 36380057 3219037b (b9400260)
---[ end trace 03381e5eb0a24de4 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
With 'efi=debug', we can see those ACPI regions loaded by firmware on
that board as:
efi: 0x0083ff185000-0x0083ff1b4fff [Reserved | | | | | | | | |WB|WT|WC|UC]*
efi: 0x0083ff1b5000-0x0083ff1c2fff [ACPI Reclaim Memory| | | | | | | | |WB|WT|WC|UC]*
efi: 0x0083ff223000-0x0083ff224fff [ACPI Memory NVS | | | | | | | | |WB|WT|WC|UC]*
Link: http://lkml.kernel.org/r/1468475036-5852-3-git-send-email-dennis.chen@arm.com
Acked-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Kaly Xin <kaly.xin@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
- ACPI support for guests on ARM platforms.
- Generic steal time support for arm and x86.
- Support cases where kernel cpu is not Xen VCPU number (e.g., if
in-guest kexec is used).
- Use the system workqueue instead of a custom workqueue in various
places.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmLlrAAoJEFxbo/MsZsTRvRQH/1wOMF8BmlbZfR7H3qwDfjst
ApNifCiZE08xDtWBlwUaBFAQxyflQS9BBiNZDVK0sysIdXeOdpWV7V0ZjRoLL+xr
czsaaGXDcmXxJxApoMDVuT7FeP6rEk6LVAYRoHpVjJjMZGW3BbX1vZaMW4DXl2WM
9YNaF2Lj+rpc1f8iG31nUxwkpmcXFog6ct4tu7HiyCFT3hDkHt/a4ghuBdQItCkd
vqBa1pTpcGtQBhSmWzlylN/PV2+NKcRd+kGiwd09/O/rNzogTMCTTWeHKAtMpPYb
Cu6oSqJtlK5o0vtr0qyLSWEGIoyjE2gE92s0wN3iCzFY1PldqdsxUO622nIj+6o=
=G6q3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Features and fixes for 4.8-rc0:
- ACPI support for guests on ARM platforms.
- Generic steal time support for arm and x86.
- Support cases where kernel cpu is not Xen VCPU number (e.g., if
in-guest kexec is used).
- Use the system workqueue instead of a custom workqueue in various
places"
* tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits)
xen: add static initialization of steal_clock op to xen_time_ops
xen/pvhvm: run xen_vcpu_setup() for the boot CPU
xen/evtchn: use xen_vcpu_id mapping
xen/events: fifo: use xen_vcpu_id mapping
xen/events: use xen_vcpu_id mapping in events_base
x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info
x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op
xen: introduce xen_vcpu_id mapping
x86/acpi: store ACPI ids from MADT for future usage
x86/xen: update cpuid.h from Xen-4.7
xen/evtchn: add IOCTL_EVTCHN_RESTRICT
xen-blkback: really don't leak mode property
xen-blkback: constify instance of "struct attribute_group"
xen-blkfront: prefer xenbus_scanf() over xenbus_gather()
xen-blkback: prefer xenbus_scanf() over xenbus_gather()
xen: support runqueue steal time on xen
arm/xen: add support for vm_assist hypercall
xen: update xen headers
xen-pciback: drop superfluous variables
xen-pciback: short-circuit read path used for merging write values
...
- Kexec support for arm64
- Kprobes support
- Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs
- Trapping of user space cache maintenance operations and emulation in
the kernel (CPU errata workaround)
- Clean-up of the early page tables creation (kernel linear mapping, EFI
run-time maps) to avoid splitting larger blocks (e.g. pmds) into
smaller ones (e.g. ptes)
- VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()
- ARCH_HAS_KCOV enabled for arm64
- Optimise IP checksum helpers
- SWIOTLB optimisation to only allocate/initialise the buffer if the
available RAM is beyond the 32-bit mask
- Properly handle the "nosmp" command line argument
- Fix for the initialisation of the CPU debug state during early boot
- vdso-offsets.h build dependency workaround
- Build fix when RANDOMIZE_BASE is enabled with MODULES off
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iJOY
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Kexec support for arm64
- Kprobes support
- Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs
- Trapping of user space cache maintenance operations and emulation in
the kernel (CPU errata workaround)
- Clean-up of the early page tables creation (kernel linear mapping,
EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into
smaller ones (e.g. ptes)
- VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()
- ARCH_HAS_KCOV enabled for arm64
- Optimise IP checksum helpers
- SWIOTLB optimisation to only allocate/initialise the buffer if the
available RAM is beyond the 32-bit mask
- Properly handle the "nosmp" command line argument
- Fix for the initialisation of the CPU debug state during early boot
- vdso-offsets.h build dependency workaround
- Build fix when RANDOMIZE_BASE is enabled with MODULES off
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype
arm64: Only select ARM64_MODULE_PLTS if MODULES=y
arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages
arm64: mm: make create_mapping_late() non-allocating
arm64: Honor nosmp kernel command line option
arm64: Fix incorrect per-cpu usage for boot CPU
arm64: kprobes: Add KASAN instrumentation around stack accesses
arm64: kprobes: Cleanup jprobe_return
arm64: kprobes: Fix overflow when saving stack
arm64: kprobes: WARN if attempting to step with PSTATE.D=1
arm64: debug: remove unused local_dbg_{enable, disable} macros
arm64: debug: remove redundant spsr manipulation
arm64: debug: unmask PSTATE.D earlier
arm64: localise Image objcopy flags
arm64: ptrace: remove extra define for CPSR's E bit
kprobes: Add arm64 case in kprobe example module
arm64: Add kernel return probes support (kretprobes)
arm64: Add trampoline code for kretprobes
arm64: kprobes instruction simulation support
arm64: Treat all entry code as non-kprobe-able
...
Commit 0a8ea52c3e ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API
feature") inadvertently removed the arch/arm prototype instead of the
arm64 one introduced by the original patch. There should not be any
bisection issues since this function is not called from anywhere else
(it could as well be removed from arch/arm at some point).
Fixes: 0a8ea52c3e ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2
- most(?) of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
thp: fix comments of __pmd_trans_huge_lock()
cgroup: remove unnecessary 0 check from css_from_id()
cgroup: fix idr leak for the first cgroup root
mm: memcontrol: fix documentation for compound parameter
mm: memcontrol: remove BUG_ON in uncharge_list
mm: fix build warnings in <linux/compaction.h>
mm, thp: convert from optimistic swapin collapsing to conservative
mm, thp: fix comment inconsistency for swapin readahead functions
thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
shmem: split huge pages beyond i_size under memory pressure
thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
khugepaged: add support of collapse for tmpfs/shmem pages
shmem: make shmem_inode_info::lock irq-safe
khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
thp: extract khugepaged from mm/huge_memory.c
shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
shmem: add huge pages support
shmem: get_unmapped_area align huge page
shmem: prepare huge= mount option and sysfs knob
mm, rmap: account shmem thp pages
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrOW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
- Support for ACPI SSDT overlays allowing Secondary System
Description Tables (SSDTs) to be loaded at any time from EFI
variables or via configfs (Octavian Purdila, Mika Westerberg).
- Support for the ACPI LPI (Low-Power Idle) feature introduced in
ACPI 6.0 and allowing processor idle states to be represented in
ACPI tables in a hierarchical way (with the help of Processor
Container objects) and support for ACPI idle states management
on ARM64, based on LPI (Sudeep Holla).
- General improvements of ACPI support for NUMA and ARM64 support
for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).
- General improvements of the ACPI table upgrade mechanism and
ARM64 support for that feature (Aleksey Makarov, Jon Masters).
- Support for the Boot Error Record Table (BERT) in APEI and
improvements of kernel messages printed by the error injection
code (Huang Ying, Borislav Petkov).
- New driver for the Intel Broxton WhiskeyCove PMIC operation
region and support for the REGS operation region on Broxton,
PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).
- New driver for the power participant device which is part of the
Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
reorganization (Srinivas Pandruvada).
- Support for the platform-initiated graceful shutdown feature
introduced in ACPI 6.1 (Prashanth Prakash).
- ACPI button driver update related to lid input events generated
automatically on initialization and system resume that have been
problematic for some time (Lv Zheng).
- ACPI EC driver cleanups (Lv Zheng).
- Documentation of the ACPICA release automation process and the
in-kernel ACPI AML debugger (Lv Zheng).
- New blacklist entry and two fixes for the ACPI backlight driver
(Alex Hung, Arvind Yadav, Ralf Gerbig).
- Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).
- ACPI CPPC code changes to make it more robust against possible
defects in ACPI tables and new symbol definitions for PCC (Hoan
Tran).
- System reboot code modification to execute the ACPI _PTS (Prepare
To Sleep) method in addition to _TTS (Ocean He).
- ACPICA-related change to carry out lock ordering checks in ACPICA
if ACPICA debug is enabled in the kernel (Lv Zheng).
- Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=YwbM
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The new feaures here are the support for ACPI overlays (allowing ACPI
tables to be loaded at any time from EFI variables or via configfs)
and the LPI (Low-Power Idle) support. Also notable is the ACPI-based
NUMA support for ARM64.
Apart from that we have two new drivers, for the DPTF (Dynamic Power
and Thermal Framework) power participant device and for the Intel
Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for
the Boot Error Record Table (BERT) in APEI and support for
platform-initiated graceful shutdown.
Plus two new pieces of documentation and usual assorted fixes and
cleanups in quite a few places.
Specifics:
- Support for ACPI SSDT overlays allowing Secondary System
Description Tables (SSDTs) to be loaded at any time from EFI
variables or via configfs (Octavian Purdila, Mika Westerberg).
- Support for the ACPI LPI (Low-Power Idle) feature introduced in
ACPI 6.0 and allowing processor idle states to be represented in
ACPI tables in a hierarchical way (with the help of Processor
Container objects) and support for ACPI idle states management on
ARM64, based on LPI (Sudeep Holla).
- General improvements of ACPI support for NUMA and ARM64 support for
ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).
- General improvements of the ACPI table upgrade mechanism and ARM64
support for that feature (Aleksey Makarov, Jon Masters).
- Support for the Boot Error Record Table (BERT) in APEI and
improvements of kernel messages printed by the error injection code
(Huang Ying, Borislav Petkov).
- New driver for the Intel Broxton WhiskeyCove PMIC operation region
and support for the REGS operation region on Broxton, PMIC code
cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).
- New driver for the power participant device which is part of the
Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
reorganization (Srinivas Pandruvada).
- Support for the platform-initiated graceful shutdown feature
introduced in ACPI 6.1 (Prashanth Prakash).
- ACPI button driver update related to lid input events generated
automatically on initialization and system resume that have been
problematic for some time (Lv Zheng).
- ACPI EC driver cleanups (Lv Zheng).
- Documentation of the ACPICA release automation process and the
in-kernel ACPI AML debugger (Lv Zheng).
- New blacklist entry and two fixes for the ACPI backlight driver
(Alex Hung, Arvind Yadav, Ralf Gerbig).
- Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).
- ACPI CPPC code changes to make it more robust against possible
defects in ACPI tables and new symbol definitions for PCC (Hoan
Tran).
- System reboot code modification to execute the ACPI _PTS (Prepare
To Sleep) method in addition to _TTS (Ocean He).
- ACPICA-related change to carry out lock ordering checks in ACPICA
if ACPICA debug is enabled in the kernel (Lv Zheng).
- Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)"
* tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
arm64: add support for ACPI Low Power Idle(LPI)
drivers: firmware: psci: initialise idle states using ACPI LPI
cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
arm64: cpuidle: drop __init section marker to arm_cpuidle_init
ACPI / processor_idle: Add support for Low Power Idle(LPI) states
ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
ACPI / DPTF: move int340x_thermal.c to the DPTF folder
ACPI / DPTF: Add DPTF power participant driver
ACPI / lpat: make it explicitly non-modular
ACPI / dock: make dock explicitly non-modular
ACPI / PCI: make pci_slot explicitly non-modular
ACPI / PMIC: remove modular references from non-modular code
ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel
ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
ACPI / debugger: Add AML debugger documentation
ACPI: Add documentation describing ACPICA release automation
ACPI: add support for loading SSDTs via configfs
ACPI: add support for configfs
efi / ACPI: load SSTDs from EFI variables
...
Selecting CONFIG_RANDOMIZE_BASE=y and CONFIG_MODULES=n fails to build
the module PLTs support:
CC arch/arm64/kernel/module-plts.o
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c: In function ‘module_emit_plt_entry’:
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c:32:49: error: dereferencing pointer to incomplete type ‘struct module’
This patch selects ARM64_MODULE_PLTS conditionally only if MODULES is
enabled.
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Reported-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enables CONFIG_HARDENED_USERCOPY checks on arm64. As done by KASAN in -next,
renames the low-level functions to __arch_copy_*_user() so a static inline
can do additional work before the copy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add the SoC-level description of the PCIe controller found on the Marvell
Armada 3700 and enable this PCIe controller on the development board for
this SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.8:
API:
- first part of skcipher low-level conversions
- add KPP (Key-agreement Protocol Primitives) interface.
Algorithms:
- fix IPsec/cryptd reordering issues that affects aesni
- RSA no longer does explicit leading zero removal
- add SHA3
- add DH
- add ECDH
- improve DRBG performance by not doing CTR by hand
Drivers:
- add x86 AVX2 multibuffer SHA256/512
- add POWER8 optimised crc32c
- add xts support to vmx
- add DH support to qat
- add RSA support to caam
- add Layerscape support to caam
- add SEC1 AEAD support to talitos
- improve performance by chaining requests in marvell/cesa
- add support for Araneus Alea I USB RNG
- add support for Broadcom BCM5301 RNG
- add support for Amlogic Meson RNG
- add support Broadcom NSP SoC RNG"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
crypto: vmx - Fix aes_p8_xts_decrypt build failure
crypto: vmx - Ignore generated files
crypto: vmx - Adding support for XTS
crypto: vmx - Adding asm subroutines for XTS
crypto: skcipher - add comment for skcipher_alg->base
crypto: testmgr - Print akcipher algorithm name
crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
crypto: nx - off by one bug in nx_of_update_msc()
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
crypto: scatterwalk - Inline start/map/done
crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: api - Optimise away crypto_yield when hard preemption is on
crypto: scatterwalk - add no-copy support to copychunks
crypto: scatterwalk - Remove scatterwalk_bytes_sglen
crypto: omap - Stop using crypto scatterwalk_bytes_sglen
crypto: skcipher - Remove top-level givcipher interface
crypto: user - Remove crypto_lookup_skcipher call
crypto: cts - Convert to skcipher
...
- Switching of MSR_TSC_AUX in SVM was thought to cause a host
misbehavior, but it was later cleared of those doubts and the patch
moved code to a hot path, so we reverted it. That patch also needed
a fix for 32 bit builds and both were reverted in one go.
- Al Viro noticed that a fix for a leak in an error path was not valid
with the given API and provided a better fix, so the original patch
was reverted.
Then there are two VMX fixes that move code around because VMCS was not
accessed between vcpu_load() and vcpu_put(), a simple ARM VHE fix, and
two one-liners for PML and MTRR.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXljRwAAoJEED/6hsPKofoIZMIAIMm2h5HKplmpT007dVCt1zw
dG8gO9hxOxstXfGVkNEZvdxyUb0ilFMO5AYySS1ctENpswVAZlKWlyc+aNGsHXOS
KFylAUNHlibua1xgB64Sitgub8M9Ct5mDfvvqWL79aCgHTLcDxnb/0NprTqB2P3O
TfsLaiKMDOeZs4nTcs62vNqpPJzoFc6DK2x1RltFGF9RpR7bOD7gnp7KypDWJx7S
1LleWPHboxHQ40qf8dxAb7HwEARfXndlP6ZoCkf2stoWTwuexHJfesUnsNgEuXnX
6YJ9mO7np/bHfSDpGMJbb9pPI5g7UDwOzmgvYQvzhak3LRmvjsZePpWchlb0yCs=
=3VD4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM leftovers from Radim Krčmář:
"This is a combination of two pull requests for 4.7-rc8 that were not
merged due to looking hairy. I have changed the tag message to focus
on circumstances of contained reverts as they were likely the reason
behind rejection.
This merge introduces three patches that are later reverted,
- Switching of MSR_TSC_AUX in SVM was thought to cause a host
misbehavior, but it was later cleared of those doubts and the patch
moved code to a hot path, so we reverted it. That patch also
needed a fix for 32 bit builds and both were reverted in one go.
- Al Viro noticed that a fix for a leak in an error path was not
valid with the given API and provided a better fix, so the original
patch was reverted.
Then there are two VMX fixes that move code around because VMCS was
not accessed between vcpu_load() and vcpu_put(), a simple ARM VHE fix,
and two one-liners for PML and MTRR"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm64: KVM: VHE: Context switch MDSCR_EL1
KVM: VMX: handle PML full VMEXIT that occurs during event delivery
Revert "KVM: SVM: fix trashing of MSR_TSC_AUX"
KVM: SVM: do not set MSR_TSC_AUX on 32-bit builds
KVM: don't use anon_inode_getfd() before possible failures
Revert "KVM: release anon file in failure path of vm creation"
KVM: release anon file in failure path of vm creation
KVM: nVMX: Fix memory corruption when using VMCS shadowing
kvm: vmx: ensure VMCS is current while enabling PML
KVM: SVM: fix trashing of MSR_TSC_AUX
KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault
Added mdio node for mdio driver. Also added phy-handle
reference to the ethernet nodes.
Removed unused clock node from storm sgenet1.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull timer updates from Thomas Gleixner:
"This update provides the following changes:
- The rework of the timer wheel which addresses the shortcomings of
the current wheel (cascading, slow search for next expiring timer,
etc). That's the first major change of the wheel in almost 20
years since Finn implemted it.
- A large overhaul of the clocksource drivers init functions to
consolidate the Device Tree initialization
- Some more Y2038 updates
- A capability fix for timerfd
- Yet another clock chip driver
- The usual pile of updates, comment improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
tick/nohz: Optimize nohz idle enter
clockevents: Make clockevents_subsys static
clocksource/drivers/time-armada-370-xp: Fix return value check
timers: Implement optimization for same expiry time in mod_timer()
timers: Split out index calculation
timers: Only wake softirq if necessary
timers: Forward the wheel clock whenever possible
timers/nohz: Remove pointless tick_nohz_kick_tick() function
timers: Optimize collect_expired_timers() for NOHZ
timers: Move __run_timers() function
timers: Remove set_timer_slack() leftovers
timers: Switch to a non-cascading wheel
timers: Reduce the CPU index space to 256k
timers: Give a few structs and members proper names
hlist: Add hlist_is_singular_node() helper
signals: Use hrtimer for sigtimedwait()
timers: Remove the deprecated mod_timer_pinned() API
timers, net/ipv4/inet: Initialize connection request timers as pinned
timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
timers, drivers/tty/metag_da: Initialize the poll timer as pinned
...
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
Pull EFI updates from Ingo Molnar:
"The biggest change in this cycle were SGI/UV related changes that
clean up and fix UV boot quirks and problems.
There's also various smaller cleanups and refinements"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Reorganize the GUID table to make it easier to read
x86/efi: Remove the unused efi_get_time() function
x86/efi: Update efi_thunk() to use the the arch_efi_call_virt*() macros
x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()
efi: Convert efi_call_virt() to efi_call_virt_pointer()
x86/efi: Remove unused variable 'efi'
efi: Document #define FOO_PROTOCOL_GUID layout
efibc: Report more information in the error messages
The kernel page table creation routines are accessible to other subsystems
(e.g., EFI) via the create_pgd_mapping() entry point, which allows mappings
to be created that are not covered by init_mm.
Since generic code such as apply_to_page_range() may expect translation
table pages that are not associated with init_mm to be covered by fully
constructed struct pages, add a call to pgtable_page_ctor() in the alloc
function used by create_pgd_mapping. Since it is no longer used by
create_mapping_late(), also update the name of this function to better
reflect its purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only purpose served by create_mapping_late() is to remap the already
mapped .text and .rodata kernel segments with read-only permissions. Since
we no longer allow block mappings to be split or merged,
create_mapping_late() should not pass an allocation function pointer into
__create_pgd_mapping(). So pass NULL instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* acpi-processor:
ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
arm64: add support for ACPI Low Power Idle(LPI)
drivers: firmware: psci: initialise idle states using ACPI LPI
cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
arm64: cpuidle: drop __init section marker to arm_cpuidle_init
ACPI / processor_idle: Add support for Low Power Idle(LPI) states
ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
* acpi-cppc:
mailbox: pcc: Add PCC request and free channel declarations
ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
ACPI: CPPC: Return error if _CPC is invalid on a CPU
* acpi-apei:
ACPI / APEI: Add Boot Error Record Table (BERT) support
ACPI / einj: Make error paths more talkative
ACPI / einj: Convert EINJ_PFX to proper pr_fmt
* acpi-sleep:
ACPI: Execute _PTS before system reboot
* acpi-tables:
ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
ACPI: add support for loading SSDTs via configfs
ACPI: add support for configfs
efi / ACPI: load SSTDs from EFI variables
spi / ACPI: add support for ACPI reconfigure notifications
i2c / ACPI: add support for ACPI reconfigure notifications
ACPI: add support for ACPI reconfiguration notifiers
ACPI / scan: fix enumeration (visited) flags for bus rescans
ACPI / documentation: add SSDT overlays documentation
ACPI: ARM64: support for ACPI_TABLE_UPGRADE
ACPI / tables: introduce ARCH_HAS_ACPI_TABLE_UPGRADE
ACPI / tables: move arch-specific symbol to asm/acpi.h
ACPI / tables: table upgrade: refactor function definitions
ACPI / tables: table upgrade: use cacheable map for tables
Conflicts:
arch/arm64/include/asm/acpi.h
The kprobe enablement work has uncovered that changes made by
a guest to MDSCR_EL1 were propagated to the host when VHE was
enabled, leading to unexpected exception being delivered.
Moving this register to the list of registers that are always
context-switched fixes the issue.
Fixes: 9c6c356832 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host")
Cc: stable@vger.kernel.org #4.6
Reported-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Tested-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This patch adds compilation and link against irqchip.
Main motivation behind using irqchip code is to enable MSI
routing code. In the future irqchip routing may also be useful
when targeting multiple irqchips.
Routing standard callbacks now are implemented in vgic-irqfd:
- kvm_set_routing_entry
- kvm_set_irq
- kvm_set_msi
They only are supported with new_vgic code.
Both HAVE_KVM_IRQCHIP and HAVE_KVM_IRQ_ROUTING are defined.
KVM_CAP_IRQ_ROUTING is advertised and KVM_SET_GSI_ROUTING is allowed.
So from now on IRQCHIP routing is enabled and a routing table entry
must exist for irqfd injection to succeed for a given SPI. This patch
builds a default flat irqchip routing table (gsi=irqchip.pin) covering
all the VGIC SPI indexes. This routing table is overwritten by the
first first user-space call to KVM_SET_GSI_ROUTING ioctl.
MSI routing setup is not yet allowed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds appropriate callbacks to support ACPI Low Power Idle
(LPI) on ARM64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit ea389daa7f (arm64: cpuidle: add __init section marker to
arm_cpuidle_init) added the __init annotation to arm_cpuidle_init
as it was not needed after booting which was correct at that time.
However with the introduction of ACPI LPI support, this will be used
from cpuhotplug path in ACPI processor driver.
This patch drops the __init annotation from arm_cpuidle_init to avoid
the following warning:
WARNING: vmlinux.o(.text+0x113c8): Section mismatch in reference from the
function acpi_processor_ffh_lpi_probe() to the function
.init.text:arm_cpuidle_init()
The function acpi_processor_ffh_lpi_probe() references
the function __init arm_cpuidle_init().
This is often because acpi_processor_ffh_lpi_probe() lacks a __init
annotation or the annotation of arm_cpuidle_init is wrong.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* kprobes:
arm64: kprobes: Add KASAN instrumentation around stack accesses
arm64: kprobes: Cleanup jprobe_return
arm64: kprobes: Fix overflow when saving stack
arm64: kprobes: WARN if attempting to step with PSTATE.D=1
kprobes: Add arm64 case in kprobe example module
arm64: Add kernel return probes support (kretprobes)
arm64: Add trampoline code for kretprobes
arm64: kprobes instruction simulation support
arm64: Treat all entry code as non-kprobe-able
arm64: Blacklist non-kprobe-able symbol
arm64: Kprobes with single stepping support
arm64: add conditional instruction simulation support
arm64: Add more test functions to insn.c
arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature
Passing "nosmp" should boot the kernel with a single processor, without
provision to enable secondary CPUs even if they are present. "nosmp" is
implemented by setting maxcpus=0. At the moment we still mark the secondary
CPUs present even with nosmp, which allows the userspace to bring them
up. This patch corrects the smp_prepare_cpus() to honor the maxcpus == 0.
Commit 44dbcc93ab ("arm64: Fix behavior of maxcpus=N") fixed the
behavior for maxcpus >= 1, but broke maxcpus = 0.
Fixes: 44dbcc93ab ("arm64: Fix behavior of maxcpus=N")
Cc: <stable@vger.kernel.org> # 4.7+
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: updated code comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In smp_prepare_boot_cpu(), we invoke cpuinfo_store_boot_cpu to store
the cpuinfo in a per-cpu ptr, before initialising the per-cpu offset for
the boot CPU. This patch reorders the sequence to make sure we initialise
the per-cpu offset before accessing the per-cpu area.
Commit 4b998ff188 ("arm64: Delay cpuinfo_store_boot_cpu") fixed the
issue where we modified the per-cpu area even before the kernel initialises
the per-cpu areas, but failed to wait until the boot cpu updated it's
offset.
Fixes: 4b998ff188 ("arm64: Delay cpuinfo_store_boot_cpu")
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
jprobe_return seems to have aged badly. Comments referring to
non-existent behaviours, and a dangerous habit of messing
with registers without telling the compiler.
This patches applies the following remedies:
- Fix the comments to describe the actual behaviour
- Tidy up the asm sequence to directly assign the
stack pointer without clobbering extra registers
- Mark the rest of the function as unreachable() so
that the compiler knows that there is no need for
an epilogue
- Stop making jprobe_return_break a global function
(you really don't want to call that guy, and it isn't
even a function).
Tested with tcp_probe.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MIN_STACK_SIZE macro tries evaluate how much stack space needs
to be saved in the jprobes_stack array, sized at 128 bytes.
When using the IRQ stack, said macro can happily return up to
IRQ_STACK_SIZE, which is 16kB. Mayhem follows.
This patch fixes things by getting rid of the crazy macro and
limiting the copy to be at most the size of the jprobes_stack
array, no matter which stack we're on.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stepping with PSTATE.D=1 is bad news. The step won't generate a debug
exception and we'll likely walk off into random data structures. This
should never happen, but when it does, it's a PITA to debug. Add a
WARN_ON to shout if we realise this is about to take place.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The debug enable/disable macros are not used anywhere in the kernel, so
remove them from irqflags.h
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is no need to explicitly clear the SS bit immediately before
setting it unconditionally.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Clearing PSTATE.D is one of the requirements for generating a debug
exception. The arm64 booting protocol requires that PSTATE.D is set,
since many of the debug registers (for example, the hw_breakpoint
registers) are UNKNOWN out of reset and could potentially generate
spurious, fatal debug exceptions in early boot code if PSTATE.D was
clear. Once the debug registers have been safely initialised, PSTATE.D
is cleared, however this is currently broken for two reasons:
(1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary
CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall
runs after SMP (and the scheduler) have been initialised, there is
no guarantee that it is actually running on the boot CPU. In this
case, the boot CPU is left with PSTATE.D set and is not capable of
generating debug exceptions.
(2) In a preemptible kernel, we may explicitly schedule on the IRQ
return path to EL1. If an IRQ occurs with PSTATE.D set in the idle
thread, then we may schedule the kthread_init thread, run the
postcore_initcall to clear PSTATE.D and then context switch back
to the idle thread before returning from the IRQ. The exception
return path will then restore PSTATE.D from the stack, and set it
again.
This patch fixes the problem by moving the clearing of PSTATE.D earlier
to proc.S. This has the desirable effect of clearing it in one place for
all CPUs, long before we have to worry about the scheduler or any
exception handling. We ensure that the previous reset of MDSCR_EL1 has
completed before unmasking the exception, so that any spurious
exceptions resulting from UNKNOWN debug registers are not generated.
Without this patch applied, the kprobes selftests have been seen to fail
under KVM, where we end up attempting to step the OOL instruction buffer
with PSTATE.D set and therefore fail to complete the step.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently define OBJCOPYFLAGS in the top-level arm64 Makefile, and
thus these flags will be passed to all uses of objcopy, kernel-wide, for
which they are not explicitly overridden. The flags we set are intended
for converting vmlinux (and ELF) into Image (a raw binary), and thus the
flags chosen are problematic for some other uses which do not expect a
raw binary result, e.g. the upcoming lkdtm rodata test:
http://www.openwall.com/lists/kernel-hardening/2016/06/08/2
This patch localises the objcopy flags such that they are only used for
the vmlinux -> Image conversion.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
...and do not confuse source navigation tools ;)
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The pre-handler of this special 'trampoline' kprobe executes the return
probe handler functions and restores original return address in ELR_EL1.
This way the saved pt_regs still hold the original register context to be
carried back to the probed kernel function.
Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The trampoline code is used by kretprobes to capture a return from a probed
function. This is done by saving the registers, calling the handler, and
restoring the registers. The code then returns to the original saved caller
return address. It is necessary to do this directly instead of using a
software breakpoint because the code used in processing that breakpoint
could itself be kprobe'd and cause a problematic reentry into the debug
exception handler.
Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: removed unnecessary masking of the PSTATE bits]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kprobes needs simulation of instructions that cannot be stepped
from a different memory location, e.g.: those instructions
that uses PC-relative addressing. In simulation, the behaviour
of the instruction is implemented using a copy of pt_regs.
The following instruction categories are simulated:
- All branching instructions(conditional, register, and immediate)
- Literal access instructions(load-literal, adr/adrp)
Conditional execution is limited to branching instructions in
ARM v8. If conditions at PSTATE do not match the condition fields
of opcode, the instruction is effectively NOP.
Thanks to Will Cohen for assorted suggested changes.
Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: removed linux/module.h include]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Entry symbols are not kprobe safe. So blacklist them for kprobing.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: Do not include syscall wrappers in .entry.text]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add all function symbols which are called from do_debug_exception under
NOKPROBE_SYMBOL, as they can not kprobed.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add support for basic kernel probes(kprobes) and jump probes
(jprobes) for ARM64.
Kprobes utilizes software breakpoint and single step debug
exceptions supported on ARM v8.
A software breakpoint is placed at the probe address to trap the
kernel execution into the kprobe handler.
ARM v8 supports enabling single stepping before the break exception
return (ERET), with next PC in exception return address (ELR_EL1). The
kprobe handler prepares an executable memory slot for out-of-line
execution with a copy of the original instruction being probed, and
enables single stepping. The PC is set to the out-of-line slot address
before the ERET. With this scheme, the instruction is executed with the
exact same register context except for the PC (and DAIF) registers.
Debug mask (PSTATE.D) is enabled only when single stepping a recursive
kprobe, e.g.: during kprobes reenter so that probed instruction can be
single stepped within the kprobe handler -exception- context.
The recursion depth of kprobe is always 2, i.e. upon probe re-entry,
any further re-entry is prevented by not calling handlers and the case
counted as a missed kprobe).
Single stepping from the x-o-l slot has a drawback for PC-relative accesses
like branching and symbolic literals access as the offset from the new PC
(slot address) may not be ensured to fit in the immediate value of
the opcode. Such instructions need simulation, so reject
probing them.
Instructions generating exceptions or cpu mode change are rejected
for probing.
Exclusive load/store instructions are rejected too. Additionally, the
code is checked to see if it is inside an exclusive load/store sequence
(code from Pratyush).
System instructions are mostly enabled for stepping, except MSR/MRS
accesses to "DAIF" flags in PSTATE, which are not safe for
probing.
This also changes arch/arm64/include/asm/ptrace.h to use
include/asm-generic/ptrace.h.
Thanks to Steve Capper and Pratyush Anand for several suggested
Changes.
Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cease using the arm32 arm_check_condition() function and replace it with
a local version for use in deprecated instruction support on arm64. Also
make the function table used by this available for future use by kprobes
and/or uprobes.
This function is derived from code written by Sandeepa Prabhu.
Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Certain instructions are hard to execute correctly out-of-line (as in
kprobes). Test functions are added to insn.[hc] to identify these. The
instructions include any that use PC-relative addressing, change the PC,
or change interrupt masking. For efficiency and simplicity test
functions are also added for small collections of related instructions.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add HAVE_REGS_AND_STACK_ACCESS_API feature for arm64, including supporting
functions and defines.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: Remove unused functions]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that all ITS emulation functionality is in place, we advertise
MSI functionality to userland and also the ITS device to the guest - if
userland has configured that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Introduce a new KVM device that represents an ARM Interrupt Translation
Service (ITS) controller. Since there can be multiple of this per guest,
we can't piggy back on the existing GICv3 distributor device, but create
a new type of KVM device.
On the KVM_CREATE_DEVICE ioctl we allocate and initialize the ITS data
structure and store the pointer in the kvm_device data.
Upon an explicit init ioctl from userland (after having setup the MMIO
address) we register the handlers with the kvm_io_bus framework.
Any reference to an ITS thus has to go via this interface.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM capabilities can be a per-VM property, though ARM/ARM64 currently
does not pass on the VM pointer to the architecture specific
capability handlers.
Add a "struct kvm*" parameter to those function to later allow proper
per-VM capability reporting.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We merged two patches that both enabled CONFIG_PWM, leading to a harmless
warning:
arch/arm64/configs/defconfig:352:warning: override: reassigning to symbol PWM
This removes one of the two identical lines to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3zUA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/late
Merge "arm64: tegra: Device tree changes for v4.8-rc1" from Thierry Reding:
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
* tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable HDMI on Jetson TX1
arm64: tegra: Add sor1_src clock
arm64: tegra: Add XUSB powergates on Tegra210
arm64: tegra: Add DPAUX pinctrl bindings
arm64: tegra: Add ACONNECT bus node for Tegra210
arm64: tegra: Add audio powergate node for Tegra210
arm64: tegra: Add regulators for Tegra210 Smaug
arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
arm64: tegra: Enable XUSB controller on Jetson TX1
arm64: tegra: Enable debug serial on Jetson TX1
arm64: tegra: Add Tegra210 XUSB controller
arm64: tegra: Add Tegra210 XUSB pad controller
arm64: tegra: Add DSI panel on Jetson TX1
arm64: tegra: p2597: Add SDMMC power supplies
arm64: tegra: Add PMIC support on Jetson TX1
Merge "ARM64: DT: Hisilicon Hi6220 updates for 4.8" from Wei Xu:
- Add pl031 rtc0 and rtc1 support for hi6220 SoC
* tag 'hi6220-dt-for-4.8-2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi6220: Add pl031 RTC support
clk: hi6220: Add RTC clock for pl031
The sor1 IP block needs the sor1_src clock to configure the clock tree
depending on whether it's running in HDMI or DP mode.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 XUSB subsystem has 3 power partitions which are XUSBA
(super-speed logic), XUSBB (USB device logic) and XUSBC (USB host
logic). Populate the device-tree nodes for these XUSB partitions.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the DPAUX pinctrl states for the DPAUX nodes defining all three
possible states of "aux", "i2c" and "off". Also add the 'i2c-bus'
node for the DPAUX nodes so that the I2C driver core does not attempt
to parse the pinctrl state nodes.
Populate the nodes for the pinctrl clients of the DPAUX pin controller.
There are two clients for each DPAUX instance, namely the SOR and one of
the I2C adapters. The SOR clients may used the DPAUX pins in either AUX
or I2C modes and so for these devices we don't define any of the generic
pinctrl states (default, idle, etc) because the SOR driver will directly
set the state needed. For I2C clients only the I2C mode is used and so
we can simplify matters by using the generic pinctrl states for default
and idle.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the ACONNECT bus node for Tegra210 which is used to interface to
the various devices in the Audio Processing Engine (APE).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators to the Tegra210 Smaug DTS file including support for the
MAX77620 PMIC.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB mailbox interrupt for Tegra210 is 40 and not 49 which is for
the XUSB pad controller. For some Tegra210 boards, this is causing USB
connect and disconnect events to go undetected. Fix this by changing the
interrupt number for the XUSB mailbox to 40.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB controller on Jetson TX1. One of the USB 3.0 lanes goes
to an internal ethernet interface, while a second USB 3.0 lane supports
the USB-A receptacle on the I/O board.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a chosen node to the device tree that contains a stdout-path
property which defines the debug serial port.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the Tegra XUSB controller. It contains a
phandle to the XUSB pad controller for control of the PHYs assigned
to the USB ports.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add power supplies for the SD/MMC card slot. Note that vmmc-supply is
currently restricted to 3.3 V because we don't support switching the
mode yet.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the MAX77620 PMIC found on the p2180
processor module (Jetson TX1). Also add supporting power supplies,
such as the main 5 V system supply.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=483Z
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64
Merge "arm64: tegra: Default configuration updates for v4.8-rc1" from Thierry Reding:
Enable a bunch of configuration options to enable PMIC, regulators, DSI,
HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that
are now functional on the Google Pixel C.
* tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: Update default configuration
1. Adjust the voltage of CPU buck regulator so scaling could work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ku6i
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung DeviceTree changes for ARM64 for v4.8" from Krzysztof Kozlowski:
1. Adjust the voltage of CPU buck regulator so scaling could work.
* tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Modify the voltage range for BUCK2 for exynos7
My static checker complains that this condition looks like it should be
== instead of =. This isn't a fast path, so we don't need to be fancy.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bxrw
-----END PGP SIGNATURE-----
Merge tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Merge "Juno platform DT updates for v4.8" from Sudeep Holla:
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
* tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add thermal zones for scpi sensors
arm64: dts: juno: add SCPI power domains for device power management
arm64: dts: juno: add coresight support
It can be useful for JIT software to be aware of MIDR_EL1 and
REVIDR_EL1 to ascertain the presence of any core errata that could
affect code generation.
This patch exposes these registers through sysfs:
/sys/devices/system/cpu/cpu$ID/regs/identification/midr_el1
/sys/devices/system/cpu/cpu$ID/regs/identification/revidr_el1
where $ID is the cpu number. For big.LITTLE systems, one can have a
mixture of cores (e.g. Cortex A53 and Cortex A57), thus all CPUs need
to be enumerated.
If the kernel does not have valid information to populate these entries
with, an empty string is returned to userspace.
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steve Capper <steve.capper@linaro.org>
[suzuki.poulose@arm.com: ABI documentation updates, hotplug notifiers, kobject changes]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
So far the arm64 clock_gettime() vDSO implementation only supported
the following clocks, falling back to the syscall for the others:
- CLOCK_REALTIME{,_COARSE}
- CLOCK_MONOTONIC{,_COARSE}
This patch adds support for the CLOCK_MONOTONIC_RAW clock, taking
advantage of the recent refactoring of the vDSO time functions. Like
the non-_COARSE clocks, this only works when the "arch_sys_counter"
clocksource is in use (allowing us to read the current time from the
virtual counter register), otherwise we also have to fall back to the
syscall.
Most of the data is shared with CLOCK_MONOTONIC, and the algorithm is
similar. The reference implementation in kernel/time/timekeeping.c
shows that:
- CLOCK_MONOTONIC = tk->wall_to_monotonic + tk->xtime_sec +
timekeeping_get_ns(&tk->tkr_mono)
- CLOCK_MONOTONIC_RAW = tk->raw_time + timekeeping_get_ns(&tk->tkr_raw)
- tkr_mono and tkr_raw are identical (in particular, same
clocksource), except these members:
* mult (only mono's multiplier is NTP-adjusted)
* xtime_nsec (always 0 for raw)
Therefore, tk->raw_time and tkr_raw->mult are now also stored in the
vDSO data page.
Cc: Ali Saidi <ali.saidi@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Time functions are directly implemented in assembly in arm64, and it
is desirable to keep it this way for performance reasons (everything
fits in registers, so that the stack is not used at all). However, the
current implementation is quite difficult to read and understand (even
considering it's assembly). Additionally, due to the structure of
__kernel_clock_gettime, which heavily uses conditional branches to
share code between the different clocks, it is difficult to support a
new clock without making the branches even harder to follow.
This commit completely refactors the structure of clock_gettime (and
gettimeofday along the way) while keeping exactly the same algorithms.
We no longer try to share code; instead, macros provide common
operations. This new approach comes with a number of advantages:
- In clock_gettime, clock implementations are no longer interspersed,
making them much more readable. Additionally, macros only use
registers passed as arguments or reserved with .req, this way it is
easy to make sure that registers are properly allocated. To avoid a
large number of branches in a given execution path, a jump table is
used; a normal execution uses 3 unconditional branches.
- __do_get_tspec has been replaced with 2 macros (get_ts_clock_mono,
get_clock_shifted_nsec) and explicit loading of data from the vDSO
page. Consequently, clock_gettime and gettimeofday are now leaf
functions, and saving x30 (lr) is no longer necessary.
- Variables protected by tb_seq_count are now loaded all at once,
allowing to merge the seqcnt_read macro into seqcnt_check.
- For CLOCK_REALTIME_COARSE, removed an unused load of the wall to
monotonic timespec.
- For CLOCK_MONOTONIC_COARSE, removed a few shift instructions.
Obviously, the downside of sharing less code is an increase in code
size. However since the vDSO has its own code page, this does not
really matter, as long as the size of the DSO remains below 4 kB. For
now this should be all right:
Before After
vdso.so size (B) 2776 3000
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64/kernel/{vdso,signal}.c include vdso-offsets.h, as well as any
file that includes asm/vdso.h. Therefore, vdso-offsets.h must be
generated before these files are compiled.
The current rules in arm64/kernel/Makefile do not actually enforce
this, because even though $(obj)/vdso is listed as a prerequisite for
vdso-offsets.h, this does not result in the intended effect of
building the vdso subdirectory (before all the other objects). As a
consequence, depending on the order in which the rules are followed,
vdso-offsets.h is updated or not before arm64/kernel/{vdso,signal}.o
are built. The current rules also impose an unnecessary dependency on
vdso-offsets.h for all arm64/kernel/*.o, resulting in unnecessary
rebuilds. This is made obvious when using make -j:
touch arch/arm64/kernel/vdso/gettimeofday.S && make -j$NCPUS arch/arm64/kernel
will sometimes result in none of arm64/kernel/*.o being
rebuilt, sometimes all of them, or even just some of them.
It is quite difficult to ensure that a header is generated before it
is used with recursive Makefiles by using normal rules. Instead,
arch-specific generated headers are normally built in the archprepare
recipe in the arch Makefile (see for instance arch/ia64/Makefile).
Unfortunately, asm-offsets.h is included in gettimeofday.S, and must
therefore be generated before vdso-offsets.h, which is not the case if
archprepare is used. For this reason, a rule run after archprepare has
to be used.
This commit adds rules in arm64/Makefile to build vdso-offsets.h
during the prepare step, ensuring that vdso-offsets.h is generated
before building anything. It also removes the now-unnecessary
dependencies on vdso-offsets.h in arm64/kernel/Makefile. Finally, it
removes the duplication of asm-offsets.h between arm64/kernel/vdso/
and include/generated/ and makes include/generated/vdso-offsets.h a
target in arm64/kernel/vdso/Makefile.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This reverts commit 90f777beb7.
While this commit was aimed at fixing the dependencies, with a large
make -j the vdso-offsets.h file is not generated, leading to build
failures.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable a couple of drivers that are used on Jetson TX1:
* GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO
expander are used on Jetson TX1 to expand the number of usable GPIOs
on the I/O board. Enable the driver for this expander along with IRQ
support.
* MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620,
RTC_DRV_MAX77686: Enable support for the PMIC and various of its
components found on the Jetson TX1 processor module (p2180).
* RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on
boards, but it can be useful as a wakeup source from suspend to RAM.
* REGULATOR_PWM: The GPU is supplied by a regulator controlled via one
of the Tegra's PWM channels.
* DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an
optional DSI panel on Jetson TX1 as well as the GPU.
* BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if
shipped with a display module, is driver by an LP8557.
* PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on
Jetson TX1.
* PWM, PWM_TEGRA: One of the PWM channels is used to control the
voltage supplied to the GPU.
* NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol
to increase compatibility with distributions.
* MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable
the ChromeOS Embedded Controller and the I2C tunnel that allows the
EC to function as an I2C bridge.
* BATTERY_BQ27XXX: Support the battery charger and monitor found on
the Google Pixel C.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable more drivers for IP blocks for existing Exynos7 and upcoming
Exynos5433:
1. SPI,
2. Watchdog,
3. USB: DWC3, Exynos EHCI and OHCI,
4. Exynos ADC,
5. Samsung PWM.
These are already used by Exynos7 Espresso board or will be used by
Exynos5433 based board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXefulAAoJEHm+PkMAQRiG6nMH/2O1vcZeOtqmx2yCMUeXyKAT
wG88XflXzf3rM7C7TiObEYVf/bbLleJ7saDLEeic7ButD5gyYacIuzylVnrcqfBc
vinz4cOw5kvu9DrRkCKdOfiTAgwYtqQW+syJ8ZK4lPQuSxnPAs+F/FKSOpyUF5FN
Dngr520KjYKBEtn27W9UDPChFRwQoWAlaOC534eusaArCJtHGHHiuq5TEDn2EIo8
pUw2vwx5JiquSHOY34WLU7r+QoilovCQlUSsBQdLlPjfMB1QFtclPYa+5yEMjkT4
wusOUOfS/zK0rV6KnEdc/SkpiVX5C9WpFiWUOdEeJ5mZ+KijVkaOa9K1EDx8jSM=
=7Hwh
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rc6' into patchwork
Linux 4.7-rc6
* tag 'v4.7-rc6': (1245 commits)
Linux 4.7-rc6
ovl: warn instead of error if d_type is not supported
MIPS: Fix possible corruption of cache mode by mprotect.
locks: use file_inode()
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
phy: miphy28lp: Inform the reset framework that our reset line may be shared
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
lockd: unregister notifier blocks if the service fails to come up completely
ACPI,PCI,IRQ: correct operator precedence
fuse: serialize dirops by default
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
powerpc: Initialise pci_io_base as early as possible
mfd: da9053: Fix compiler warning message for uninitialised variable
mfd: max77620: Fix FPS switch statements
phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
usb: dwc3: st: Inform the reset framework that our reset line may be shared
usb: host: ehci-st: Inform the reset framework that our reset line may be shared
usb: host: ohci-st: Inform the reset framework that our reset line may be shared
...
Add video encoder node for MT8173
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Current bus notifier in ARM64 (__iommu_attach_notifier)
attempts to attach dma_ops to a device on BUS_NOTIFY_ADD_DEVICE
action notification.
This will cause issues on ACPI based systems, where PCI devices
can be added before the IOMMUs the devices are attached to
had a chance to be probed, causing failures on attempts to
attach dma_ops in that the domain for the respective IOMMU
may not be set-up yet by the time the bus notifier is run.
Devices dma_ops do not require to be set-up till the matching
device drivers are probed. This means that instead of running
the notifier attaching dma_ops to devices (__iommu_attach_notifier)
on BUS_NOTIFY_ADD_DEVICE action, it can be run just before the
device driver is bound to the device in question (on action
BUS_NOTIFY_BIND_DRIVER) so that it is certain that its IOMMU
group and domain are set-up accordingly at the time the
notifier is triggered.
This patch changes the notifier action upon which dma_ops
are attached to devices and defer it to driver binding time,
so that IOMMU devices have a chance to be probed and to register
their bus notifiers before the dma_ops attach sequence for a
device is actually carried out.
As a result we also no longer need worry about racing with
iommu_bus_notifier(), or about retrying the queue in case devices
were added too early on DT-based systems, so clean up the notifier
itself plus the additional workaround from 722ec35f7f ("arm64:
dma-mapping: fix handling of devices registered before arch_initcall")
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[rm: get rid of other now-redundant bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arch/arm64/kernel/{vdso,signal}.c include generated/vdso-offsets.h, and
therefore the symbol offsets must be generated before these files are
compiled.
The current rules in arm64/kernel/Makefile do not actually enforce
this, because even though $(obj)/vdso is listed as a prerequisite for
vdso-offsets.h, this does not result in the intended effect of
building the vdso subdirectory (before all the other objects). As a
consequence, depending on the order in which the rules are followed,
vdso-offsets.h is updated or not before arm64/kernel/{vdso,signal}.o
are built. The current rules also impose an unnecessary dependency on
vdso-offsets.h for all arm64/kernel/*.o, resulting in unnecessary
rebuilds.
This patch removes the arch/arm64/kernel/vdso/vdso-offsets.h file
generation, leaving only the include/generated/vdso-offsets.h one. It
adds a forced dependency check of the vdso-offsets.h file in
arch/arm64/kernel/Makefile which, if not up to date according to the
arch/arm64/kernel/vdso/Makefile rules (depending on vdso.so.dbg), will
trigger the vdso/ subdirectory build and vdso-offsets.h re-generation.
Automatic kbuild dependency rules between kernel/{vdso,signal}.c rules
and vdso-offsets.h will guarantee that the vDSO object is built first,
followed by the generated symbol offsets header file.
Reported-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cavium erratum 27456 commit 104a0c02e8
("arm64: Add workaround for Cavium erratum 27456")
is applicable for thunderx-81xx pass1.0 SoC as well.
Adding code to enable to 81xx.
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@cavium.com>
Reviewed-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The AmLogic clock controller code is used by both arm and arm64
architectures. Explicitly select the core code for all Meson (arm64)
builds, and also select the GXBB driver, since that's the way arm64 does
things.
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit f3abd62961, which caused a build regression:
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi:48:41: fatal error: dt-bindings/clock/gxbb-clkc.h: No such file or directory
We should apply this patch one merge window later, once the clk branch
is merged as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If we take an exception while at EL1, the exception handler inherits
the original context's addr_limit and PSTATE.UAO values. To be consistent
always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This
prevents accidental re-use of the original context's addr_limit.
Based on a similar patch for arm from Russell King.
Cc: <stable@vger.kernel.org> # 4.6-
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
- Eric updates the bcm2836 interrupt controller driver not to rely on ARM/Linux specific functions
in preparation for using it on ARM64
- Eric also adds a Kconfig entry for the BCM2835 Raspberry Pi family in the ARM64 Kconfig.platforms
file
- Eric cherry picked a patch from Alexander Graf with Acks from ARM64 maintainers to support different
DMA and bus offsets, required for the Raspberry Pi 3 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXfeKCAAoJEIfQlpxEBwcE5lsQANQE4ppxhTsQe/VhxWFnIchC
UEBRTP00iFtQbiYLrP0irRe37QxRy16A5AY7yFp9CHPOe9Ut1fvzwOORCsXViqSo
5NB3UGUnLJmrBSe5q8wbGXXc0JAnFwcFEHIvnhRVPy8lG2dC0QsABmxoOgen1euz
WFFW3/nWhG3U8S59h0WqYeSlspbr9byDRFLYA8nvyK1GKtaRkwnAd4OuqKhHcI1t
1Yw1H9WnQk5deEYEYki6LJCNggJ4+cqltFb2h0x7QcMTVLz/KmNDA7uAmR+ZxLpx
RinlzKW8kdDFOqhzfr250M3z6THCpX9DR+NUjkaua5NxFuQZvhdLldOu9wXlo5Ya
bhYXgeU3YHdAw3mVHmCwqaNv0UDAhKAbmXtriqqJs44bF0HWr7oT4FyhMf7r1Pae
V6V3Oh+xYknaYOCS7Ny4ALkPFH7CbArLU5CCvW8uTSt3K38MMmFDwPurAlb7bVph
UB6jmsNVwPXrs40ha0IMnVgwnC5m8eva4g+UbV/KBr7vrSC4XQMwRfTd4Cm6ZhtB
GymQ9y7hR4VDkLnt1QNbQDWz+PE4ycixn3uN070rA+6evi0DLcOLH+KK+g3lPdsl
dZqxBkZR1JpzIM4OezKK6XzlR6cKUSW+vJ4GrDllWIHXXRILVVZLHdiDRG2rBrv0
/1rBUxXZoPvSGY79dRqD
=qrTS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/soc-arm64-part2' of http://github.com/Broadcom/stblinux into next/arm64
Merge "Broadcom ARM64-based SoC changes for 4.8 second part" from Florian Fainelli:
- Eric updates the bcm2836 interrupt controller driver not to rely on ARM/Linux specific functions
in preparation for using it on ARM64
- Eric also adds a Kconfig entry for the BCM2835 Raspberry Pi family in the ARM64 Kconfig.platforms
file
- Eric cherry picked a patch from Alexander Graf with Acks from ARM64 maintainers to support different
DMA and bus offsets, required for the Raspberry Pi 3 SoC
* tag 'arm-soc/for-4.8/soc-arm64-part2' of http://github.com/Broadcom/stblinux:
arm64: Add platform selection for BCM2835.
arm64: Allow for different DMA and CPU bus offsets
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KQmU
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux into next/dt64
Merge "Broadcom ARM64 Device Tree changes for 4.8 (part 2)" from Florian Fainelli:
This pull request contains the second part of the Broadcom ARM64-based SoCs
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
* tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux:
ARM: bcm2837: dt: Add the ethernet to the device trees
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: dt: Add the ethernet to the device trees
Pull the clockevents/clocksource tree from Daniel Lezcano:
- Convert the clocksource-probe init functions to return a value in order to
prepare the consolidation of the drivers using the DT. It is a big patchset
but went through 01.org (kbuild bot), linux next and kernel-ci (continuous
integration) (Daniel Lezcano)
- Fix a bad error handling by returning the right value for cadence_ttc
(Christophe Jaillet)
- Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)
- Change functions to static for armada-370-xp and digicolor (Ben Dooks)
- Add support for the rk3399 SoC timer by adding bindings and a slight
change in the base address. Take the opportunity to add the DYNIRQ flag
(Huang Tao)
- Fix endian accessors for the Samsung pwm timer (Matthew Leach)
- Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)
- Add a kernel parameter to swich on/off the event stream feature of the arch
arm timer (Will Deacon)
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6y2sACgkQCwYYjhRyO9UU9wCgpZ7Nd5KeqQMuwOPL/RNjIg6F
oHsAoKcUVoQteML8NkpMeyr9Lk+dtb0A
=OElN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.8 (part 1)" from Gregory CLEMENT:
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
* tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add peripherals clocks for Armada 37xx
arm64: dts: marvell: add tbg clocks for Armada 37xx
arm64: dts: marvell: Add xtal clock support for Armada 3700
arm64: dts: marvell: add XOR engine description for Armada 7K/8K CP
arm64: dts: marvell: adjust to the latest mv-xor-v2 DT binding
enable Armada 3700 clock drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6ykAACgkQCwYYjhRyO9Wo8ACdH6kYBKYuaivu3ggVBoSle+01
5noAn13h+iScUld+CAn0UVktOjd7Yplp
=sjV8
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.8-1' of git://git.infradead.org/linux-mvebu into next/arm64
Merge "mvebu arm64 for 4.8" from Gregory CLEMENT:
enable Armada 3700 clock drivers
* tag 'mvebu-arm64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: marvell: enable Armada 3700 clock drivers
Enable the Watchdog Timer (WDT) controller on the Renesas Salvator-X
board equipped with an R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Watchdog Timer (WDT) controller on the Renesas
R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU core and L2 cache/SCU to their respective PM
Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Basic support for the Gen 3 R-Car M3-W SoC.
Based on work for the r8a7795 and r8a7796 SoCs by
Takeshi Kihara, Dirk Behme and Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adds CAN FD controller node for r8a7795.
Note: CAN FD controller register base address specified in R-Car Gen3
Hardware User Manual v0.5E is incorrect. The correct address is:
CAN FD - 0xe66c0000
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For consistency with a57_0/a57_1 cpu nodes, and all other nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
smp_cond_load_acquire() is used to spin on a variable until some
expression involving that variable becomes true.
On arm64, we can build this using the LDXR and WFE instructions, since
clearing of the exclusive monitor as a result of the variable being
changed by another CPU generates an event, which will wake us up out of WFE.
This patch implements smp_cond_load_acquire() using LDXR and WFE, which
themselves are contained in an internal __cmpwait() function.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: catalin.marinas@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1467049434-30451-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbPUAAoJEPOmecmc0R2BiAUH/2UBBQ1f5A9W5bCtxe+kirFa
R+4tDNske10/h3ey+igciC+6SG4RavHyQn/MoQvu2rzeZvAoPRYi2IVR3/RERf86
uuDNMqI9C0zQNujuiN/1eVMLAhAUoDZ9+uC1uEJ6ilzKwcsk6Sb+8Fo/zQnR8evd
Z4GK+YnJtLvxQ3joEh5AcRbd+CaURjAXeJt1HGlDcLCG8HHKNNDpzaFPV2uaoVXp
1hwx7X8tY5u13K0W7yAzaAq5C4poKa+OpdxlE5g+ryOFWqnqco4l/BBaWg+XK0z5
XvPjtDE5Di8Wpgjeik/4KLwG/maD9ogdPAZGmg+U2SkGlwVdcOSZmSOE2mFHf3c=
=W2eY
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
The rk3399 gets support for its emmc controller as well as thermal,
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
* tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ap_pwroff and ddrio_pwroff pins for rk3399
arm64: dts: rockchip: Provide emmcclk to PHY for rk3399
arm64: dts: rockchip: Add soc-ctl-syscon to sdhci for rk3399
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
arm64: dts: rockchip: add i2c nodes for rk3399
arm64: dts: rockchip: add thermal nodes for rk3399 SoCs
arm64: dts: rockchip: add rk3399 io-domain core nodes
arm64: dts: rockchip: add rk3368-r88 iodomains
arm64: dts: rockchip: add rk3368 io-domain core nodes
arm64: dts: rockchip: make rk3368 grf syscons simple-mfds
arm64: dts: rockchip: enable eMMC for rk3399 EVB
arm64: dts: rockchip: add sdhci/emmc for rk3399
arm64: dts: rockchip: make rk3399's grf a "simple-mfd"
arm64: dts: rockchip: assign default rates for core rk3399 clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
When running on Xen hypervisor, runtime services are supported through
hypercall. Add a Xen specific function to initialize runtime services.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Move xen_early_init() before efi_init(), then when calling efi_init()
could initialize Xen specific UEFI.
Check if it runs on Xen hypervisor through the flat dts.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Change the BUCK2 (vdd_atlas) voltage range to '500 - 1200mv' since
CPU DVFS requires it.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The S3C RTC controller on Exynos7 platform uses RTC source clock
from S2MPS11 PMIC. This patch enables the required drivers to make
RTC work on Exynos7 Espresso board.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
- name the GPIO lines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXcq9/AAoJEAvIV27ZiWZcuEUQAIjDX8Bq6WNerOSsn/kyWIhb
0lTNHae6D4mxKax6u9npwiMpBl7JsgVkfzU6es0iZtZe+g6dAOOJMOvjRX/aPZD2
oiO05vHtU+wKlcCvRPTinTRGK3lAzsPda9xMxEuaztbcg1fmFgflpx4r+n4Gwsy4
DsPr/Miw3bMPJGtQrx4YFd9Rb7ehkDyyq7PXUBYlRtnZs4Osgxm2LVhoZsw2vQTi
u7JAA/N8R1bg7jYHEAIW+8GgPGJRcRPesGSmt92ELVVZHROP+7wx6y2PAsP+PDIO
ZIuVvqGFYWfb5bgzfYS0bApYAzcVdsGLYEzbJHEuHE84ZKzXQ0YGoZmNID3RN5Ns
2gboC7DJU+e3k6AUoBckn7drpCC7BjkwVJr3NqvyvygztdnhoibdRYxaO8ywfzD+
TY3ul0GDyUGdWsLcwTdwtbA3azdh3xFmKGzPfJGGhcN7SNfenkTxJsvNroze5PZC
ilqE5W25tS/ATqqqx2PBPbQQK4wTL0sULbFWSvt6jxYyV0OBekOMyvLnLLux/XOg
Q4XltZ16nG42ujKv0j/GCz5L0oNIuLBDqt0zF7Wa9pHq0aK+BeDXMmRf3fZ2ZLUu
4/awoQcXqorxWF8Hc8QTg/iE/I9OkiKpWzzhgIoYwabRPay/WV6Dk0kAO8UjkeAJ
OK7zJAbKnk1zYAchYxfo
=bqGx
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon Hi6220 hikey board updates for 4.8
- name the GPIO lines
* tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey: name the GPIO lines
Signed-off-by: Olof Johansson <olof@lixom.net>
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm2nAAoJEFBXWFqHsHzO6DAH/05cUGH7SLcJMBV0AVSEfCVK
eQTsriBUNNXcUwt70AUBAymfUkHPNysdN4P+KfReOc0j4FMQKqUB9UttUFItmxd2
plfhkd1wjusV5DqyqQI2Yzp7dsipgJdOoOUc206LISpJ2eaPZrOH0sOXUfZgcZ7h
F4vz5shTGk+zrvBbOd8VmTRizxr7Q1oUYAwOvAHH0DvFUFMfs3+nK8jN7qynBhnB
bdRbNxpNz2kkxrad3mIrKGLjPTBfNyhqTB6jwttwptzqOVxVhK59Kopox5dh2Mha
PvhLes1KYxdpw6CcyyJov7hvleRjKKK8kq08krEBldWeXPHB/GDREuMNg7EcNGU=
=m0V3
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
The Freescale arm64 device tree updates for 4.8:
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
* tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls2080a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add 'dma-coherent' for ls1043a PCI nodes
bindings: PCI: layerscape: Add 'dma-coherent' property
arm64: dts: ls1043a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls2080a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: fsl: Update address-cells and reg properties of cpu nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64 port.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rdgt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pK2X
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-arm64-next-2016-07-03' into soc-arm64/next
This pull request brings in the build support for the Raspberry Pi arm64
port. This has an external dependency on Jason Cooper's irqchip/bcm
branch, it is a stable branch based on v4.7-rc1, and it has been in
-next for a couple of weeks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tOiy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4CCL
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-64-next-2016-07-03' into devicetree-arm64/next
This pull request brings in the Raspberry Pi 3 DT for its arm64
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r5Ie
-----END PGP SIGNATURE-----
Merge tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/arm64
ARMv8 Juno/Vexpress defconfig updates for v4.8
1. Enable support for SCPI based sensors(temperature, voltage,
current and power)
2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based
communication with SCP on Juno
* tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: defconfig: enable SENSORS_ARM_SCPI
arm64: defconfig: enable Generic on-chip SRAM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldpA7YACgkQCwYYjhRyO9UpFwCgoVM2L6jaF0AU9Yg+aR8xeHrF
5xUAnRCe8B0TYqE0Bucj+MwmKXbWTLU7
=sEoy
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu defconfig64 for 4.8 (part 1)
- Enable the PCIe host controller found on the Armada 7K/8K SoCs
* tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
Add two new blocks of clocks. The peripheral clocks are the source clocks
of the peripheral of the Armada 3700 SoC.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add a new block of clocks. The Time Base Generators clocks can be the
parent of the peripheral clocks.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The configuration of the clock depend of the gpio latch. This information
is stored in the gpio block registers. That's why the block is shared
using a syscon node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
We have both KERN_TO_HYP and kern_hyp_va, which do the exact same
thing. Let's standardize on the latter.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We can now remove a number of dead #defines, thanks to the trampoline
code being gone.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
So far, KVM was getting in the way of kexec on 32bit (and the arm64
kexec hackers couldn't be bothered to fix it on 32bit...).
With simpler page tables, tearing KVM down becomes very easy, so
let's just do it.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
There is no way to free the boot PGD, because it doesn't exist
anymore as a standalone entity.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Since we now only have one set of page tables, the concept of
boot_pgd is useless and can be removed. We still keep it as
an element of the "extended idmap" thing.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Now that we only have the "merged page tables" case to deal with,
there is a bunch of things we can simplify in the HYP code (both
at init and teardown time).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We're in a position where we can now always have "merged" page
tables, where both the runtime mapping and the idmap coexist.
This results in some code being removed, but there is more to come.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Add the code that enables the switch to the lower HYP VA range.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Declare the __hyp_text_start/end symbols in asm/virt.h so that
they can be reused without having to declare them locally.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
As we move towards a selectable HYP VA range, it is obvious that
we don't want to test a variable to find out if we need to use
the bottom VA range, the top VA range, or use the address as is
(for VHE).
Instead, we can expand our current helper to generate the right
mask or nop with code patching. We default to using the top VA
space, with alternatives to switch to the bottom one or to nop
out the instructions.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Define the two possible HYP VA regions in terms of VA_BITS,
and keep HYP_PAGE_OFFSET_MASK as a temporary compatibility
definition.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
As we need to indicate to the rest of the kernel which region of
the HYP VA space is safe to use, add a capability that will
indicate that KVM should use the [VA_BITS-2:0] range.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
HYP_PAGE_OFFSET is not massively useful. And the way we use it
in KERN_HYP_VA is inconsistent with the equivalent operation in
EL2, where we use a mask instead.
Let's replace the uses of HYP_PAGE_OFFSET with HYP_PAGE_OFFSET_MASK,
and get rid of the pointless macro.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
hyp_kern_va is now completely unused, so let's remove it entirely.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
__hyp_panic_string is passed via the HYP panic code to the panic
function, and is being "upgraded" to a kernel address, as it is
referenced by the HYP code (in a PC-relative way).
This is a bit silly, and we'd be better off obtaining the kernel
address and not mess with it at all. This patch implements this
with a tiny bit of asm glue, by forcing the string pointer to be
read from the literal pool.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Since dealing with VA ranges tends to hurt my brain badly, let's
start with a bit of documentation that will hopefully help
understanding what comes next...
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
I don't think any single piece of the KVM/ARM code ever generated
as much hatred as the GIC emulation.
It was written by someone who had zero experience in modeling
hardware (me), was riddled with design flaws, should have been
scrapped and rewritten from scratch long before having a remote
chance of reaching mainline, and yet we supported it for a good
three years. No need to mention the names of those who suffered,
the git log is singing their praises.
Thankfully, we now have a much more maintainable implementation,
and we can safely put the grumpy old GIC to rest.
Fellow hackers, please raise your glass in memory of the GIC:
The GIC is dead, long live the GIC!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Kefeng Wang