This patch moves codes to update fb_info into exynos_drm_fbdev_update(),
so fb_info is updated via only one function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It can get exynos_gem object via function argument, so no need to call
exynos_drm_fb_gem_obj() in exynos_drm_fbdev_update.
It also can get struct drm_framebuffer *fb via helper->fb, so can remove
a function argument for it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The variable name "exynos_gem_obj" is too long, so some lines exceed 80
characters. It's simple to use "obj" instead of "exynos_gem_obj".
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_fb_set_buf_cnt() is used to set buffer count only in
exynos_drm_fbdev_update(). This patch sets directly buffer count in
exynos_drm_framebuffer_init() without using exynos_drm_fb_set_buf_cnt(),
so there is no any reason to keep exynos_drm_fb_set_buf_cnt().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The cases of the switch statement ensure that reg_type
can never be REG_TYPE_NONE here.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The size check was incomplete. It only computed the
size of area of the drawing rectangle and checked if
the size still fit inside the buffer.
The correct check is to compute the position of the
last byte that the G2D engine is going to access and
then check if that position is still contained in the
buffer. In particular we need the stride information
to determine this.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pass the correct hpd[] array to intel_get_hpd_pins() on pre-g4x
platforms.
This got broken in the following commit:
commit fd63e2a972
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Jul 21 15:32:44 2015 -0700
drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Egbert Eich <eich@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There have been many hard to track down bugs whereby userspace forgot to
flag a write buffer and then cause graphics corruption or a hung GPU
when that buffer was later purged under memory pressure (as the buffer
appeared clean, its pages would have been evicted rather than preserved
and any changes more recent than in the backing storage would be lost).
In retrospect this is a rare optimisation against memory pressure,
already the slow path. If we always mark the buffer as dirty when
accessed by the GPU, anything not used can still be evicted cheaply
(ideal behaviour for mark-and-sweep eviction) but we do not run the risk
of corruption. For correct read serialisation, userspace still has to
notify when the GPU writes to an object. However, there are certain
situations under which userspace may wish to tell white lies to the
kernel...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Goel, Akash" <akash.goel@intel.co>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
To help with debugging i2c-over-aux issues, add a module parameter than
can be used to tweak the assumed i2c bus speed, and thus the maximum
number of retries we will do for each aux message.
Cc: Simon Farnsworth <simon.farnsworth@onelan.com>
Cc: moosotc@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Calculate the number of retries we should do for each i2c-over-aux
message based on the time it takes to perform the i2c transfer vs. the
aux transfer. We assume the shortest possible length for the aux
transfer, and the longest possible (exluding clock stretching) for the
i2c transfer.
The DP spec has some examples on how to calculate this, but we don't
calculate things quite the same way. The spec doesn't account for the
retry interval (assumes immediate retry on defer), and doesn't assume
the best/worst case behaviour as we do.
Note that currently we assume 10 kHz speed for the i2c bus. Some real
world devices (eg. some Apple DP->VGA dongle) fails with less than 16
retries. and that would correspond to something close to 15 kHz (with
our method of calculating things) But let's just go for 10 kHz to be
on the safe side. Ideally we should query/set the i2c bus speed via
DPCD but for now this should at leaast remove the regression from the
1->16 byte trasnfer size change. And of course if the sink completes
the transfer quicker this shouldn't slow things down since we don't
change the interval between retries.
I did a few experiments with a DP->DVI dongle I have that allows you
to change the i2c bus speed. Here are the results of me changing the
actual bus speed and the assumed bus speed and seeing when we start
to fail the operation:
actual i2c khz assumed i2c khz max retries
1 1 ok -> 2 fail 211 ok -> 106 fail
5 8 ok -> 9 fail 27 ok -> 24 fail
10 17 ok -> 18 fail 13 ok -> 12 fail
100 210 ok -> 211 fail 2 ok -> 1 fail
So based on that we have a fairly decent safety margin baked into
the formula to calculate the max number of retries.
Fixes a regression with some DP dongles from:
commit 1d002fa720
Author: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Date: Tue Feb 10 18:38:08 2015 +0000
drm/dp: Use large transactions for I2C over AUX
v2: Use best case for AUX and worst case for i2c (Simon Farnsworth)
Add a define our AUX retry interval and account for it
v3: Make everything usecs to avoid confusion about units (Daniel)
Add a comment reminding people about the AUX bitrate (Daniel)
Use DIV_ROUND_UP() since we're after the "worst" case for i2c
Cc: Simon Farnsworth <simon.farnsworth@onelan.com>
Cc: moosotc@gmail.com
Tested-by: moosotc@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91451
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we react to native and i2c defers by waiting either 400-500 us
or 500-600 us, depending on which code path we take. Consolidate them
all to one define AUX_RETRY_INTERVAL which defines the minimum interval.
Since we've been using two different intervals pick the longer of them
and define AUX_RETRY_INTERVAL as 500 us. For the maximum just use
AUX_RETRY_INTERVAL+100 us.
I want to have a define for this so that I can use it when calculating
the estimated duration of i2c-over-aux transfers. Without a define it
would be very easy to change the sleep duration and neglect to update
the i2c-over-aux estimates.
Cc: Simon Farnsworth <simon.farnsworth@onelan.com>
Cc: moosotc@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When the audio codec is enabled or disabled, notify the audio driver.
This will enable the audio driver to get the notification at all times
(even when audio is in different powersave states).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DP MST encoder config function never sets ddi_pll_sel, even though
its value is programmed in its ->pre_enable() hook. That used to work
because a new pipe_config was kzalloc'ed at every modeset, and the value
of zero selects the highest clock for the PLL. Starting with the commit
below, the value of ddi_pll_sel is preserved through modesets, and since
the correct value wasn't properly setup by the MST code, it could lead
to warnings and blank screens.
commit 8504c74c7a
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri May 15 11:51:50 2015 +0300
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628
Cc: stable@vger.kernel.org # 7e6313a251 drm/i915: Don't use link_bw for PLL setup
Cc: stable@vger.kernel.org
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.
v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Applications like gnome-shell may try to render after dropping master
privileges. Since the driver should now be safe against this scenario,
allow those applications to use their legacy node like a render node.
v2: Add missing return statement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Commit ec9f932ed4
"drm/atomic: Cleanup on error properly in the atomic ioctl."
cleaned up some error paths, but didn't fix the TEST_ONLY path.
In the check only case plane->fb shouldn't be updated, and
the vblank events should be cleared as on failure.
Changes since v1:
- Fix -EDEADLK handling of vblank events too.
- Free state last with CHECK_ONLY.
Changes since v2:
- Add comment about freeing crtc_state->event with TEST_ONLY.
(Daniel Stone)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 92122789b2 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.
However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.
This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.
Due to 92122789b2 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.
Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).
Fix this by moving the code introduced by 92122789b2 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.
Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina]
Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina]
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress]
Fixes: 92122789b2 ("drm/i915: preserve SSC if previously set v3")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
and the addition of new clock drivers. Stephen Boyd has also done a lot
of subsystem-wide driver clean-ups (thanks!). There are also fixes to
the framework core and changes to better split clock provider drivers
from clock consumer drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QAiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Michael Turquette:
"The clk framework changes for 4.3 are mostly updates to existing
drivers and the addition of new clock drivers. Stephen Boyd has also
done a lot of subsystem-wide driver clean-ups (thanks!). There are
also fixes to the framework core and changes to better split clock
provider drivers from clock consumer drivers"
* tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: s5pv210: add missing call to samsung_clk_of_add_provider()
clk: pistachio: correct critical clock list
clk: pistachio: Fix PLL rate calculation in integer mode
clk: pistachio: Fix override of clk-pll settings from boot loader
clk: pistachio: Fix 32bit integer overflows
clk: tegra: Fix some static checker problems
clk: qcom: Fix MSM8916 prng clock enable bit
clk: Add missing header for 'bool' definition to clk-conf.h
drivers/clk: appropriate __init annotation for const data
clk: rockchip: register pll mux before pll itself
clk: add bindings for the Ux500 clocks
clk/ARM: move Ux500 PRCC bases to the device tree
clk: remove duplicated code with __clk_set_parent_after
clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
clk: Constify clk_hw argument to provider APIs
clk: Hi6220: add stub clock driver
dt-bindings: clk: Hi6220: Document stub clock driver
dt-bindings: arm: Hi6220: add doc for SRAM controller
clk: atlas7: fix pll missed divide NR in fraction mode
clk: atlas7: fix bit field and its root clk for coresight_tpiu
...
From B spec, DDI_E port belong to PowerWell 2, but
DDI_E share the powerwell_req/staus register bit with
DDI_A which belong to DDI_A_E_POWER_WELL.
In order to communicate with the connector on DDI-E, both
DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled.
Currently intel_dp_power_get(DDI_E) only enable
DDI_A_E_POWER_WELL, this patch will not only enable
DDI_a_E_POWER_WELL but also enable POWER_WELL_2.
This patch also fix the DDI-E hotplug function.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Port of:
drm/radeon/atom: Send out the full AUX address
to radeon non-atom aux path
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Enable eDP on DDI-E.
Also let's remove duplicated definitions to avoid later confusion.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are OEMs using DDI-E out there,
so let's enable it.
Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.
I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info
v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.
Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DDI-E doesn't have the correspondent GMBUS pin.
We rely on VBT to tell us which one it being used instead.
The DVI/HDMI on shared port couldn't exist.
This patch isn't tested without hardware wchich has HDMI
on DDI-E.
v2: fix trailing whitespace
v3: MISSING_CASE take place of BUG()
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit da2bc1b9db
Author: Imre Deak <imre.deak@intel.com>
Date: Thu Oct 23 19:23:26 2014 +0300
drm/i915: add poweroff_late handler
introduced a regression on old platforms during hibernation. A workaround was
added in
commit ab3be73fa7
Author: Imre Deak <imre.deak@intel.com>
Date: Mon Mar 2 13:04:41 2015 +0200
drm/i915: gen4: work around hang during hibernation
using an explicit blacklist for the GENs/BIOS vendors where the issue was
reported. Later there we had reports of the same failure on platforms not on
this list.
To my best knowledge the correct thing to do is still to put the device to PCI
D3 state during hibernation, see [1] and [2] for the reasons. This also aligns
with our future plans to unify more the runtime and system suspend/resume
paths. Since an exact blacklist seems to be impractical (multiple GENs and
BIOS vendors are affected) apply the workaround on everything pre GEN6.
[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html
[2] https://lkml.org/lkml/2015/6/22/274
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061
Reported-by: Ilya Tumaykin <itumaykin@gmail.com>
Reported-by: Dirk Griesbach <spamthis@freenet.de>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We are no longer checkling the DP link status on long hpd. We used to do
that from the .hot_plug() handler, but it was removed when MST got
introduced.
If there's no userspace we now fail to retrain the link if the sink
power is toggled (or cable yanked and replugged), meaning the user is
left staring at a blank screen. With the retraining put back that should
be fixed.
Also remove the leftover comment that referred to the old retraining
from .hot_plug().
Fixes a regression introduced in:
commit 0e32b39cee
Author: Dave Airlie <airlied@redhat.com>
Date: Fri May 2 14:02:48 2014 +1000
drm/i915: add DP 1.2 MST support (v0.7)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453
Tested-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is a second pull-request which adds last part of
atomic modeset/pageflip support, render node support,
clean-up, and fix-up.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix build warning to exynos_drm_gem.c
drm/exynos: Properly report supported formats for each device
drm/exynos: add render node support
drm/exynos: implement atomic_{begin/flush} of DECON
drm/exynos: remove legacy ->suspend()/resume()
drm/exynos: Enable atomic modesetting feature
drm/exynos: remove wait queue for pending page flip
drm/exynos: wait all planes updates to finish
drm/exynos: add atomic asynchronous commit
drm/exynos: fimd: only finish update if START == START_S
drm/exynos: add macro to get the address of START_S reg
drm/exynos: check for pending fb before finish update
drm/exynos: fimd: move window protect code to prepare/cleanup_plane
drm/exynos: add prepare and cleanup phases for planes
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
drm/exynos: don't track enabled state at exynos_crtc
Some i915 fixes headed for v4.3. SKL DDI-E is a wip, but here's the
first in a series.
* tag 'drm-intel-next-fixes-2015-08-28' of git://anongit.freedesktop.org/drm-intel:
drm/i915/skl: enable DDI-E hotplug
drm/i915: Fix build warning on 32-bit
drm/i915/skl: Update DDI buffer translation programming.
drm/i915: Allow parsing of variable size child device entries from VBT
drm/i915: fix link rates reported for SKL
drm/i915: fix VBT parsing for SDVO child device mapping
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch allows clients who want to use render node to access
rendering relevant ioctls - g2d, post processor and gem allocation.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow
registers to active register in the functions. This patch achieves these
purpose by moving the setting of protection bits to those functions from
decon_update_plane.
v2: rebased to the branch exynos-drm-next
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
These legacy helpers should only be used by shadow-attaching drivers.
KMS drivers has its own way to handle suspend/resume and don't need to
use these two helpers.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <daeinki@gmail.com>
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Now that atomic modesetting is implemented for exynos enable the
DRIVER_ATOMIC flag on the driver's features.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.
It also changes vblank behaviour and keeps it enabled for all types
of updates
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.
It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.
The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.
Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct drm_crtc already stores the enabled state of the crtc
thus we don't need to replicate enabled in exynos_drm_crtc.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The latter is a default version of <asm/mman.h> and not for driver use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Saving the current UVD state on suspend and restoring it on resume
just doesn't work reliable. Just close cleanup all sessions on suspend.
Ported from radeon commit "12e49feadff6d7b7ebbe852b36943a71524d8d34".
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
This way the scheduler doesn't wait in it's work thread any more.
v2: fix race conditions
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then
driver needs to set CDCLK to avoid display corruption if DPLL0 enabled.
References: https://bugs.freedesktop.org/show_bug.cgi?id=91697
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Xiong Y Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The copyright header in nvkm/engine/device/platform.c has been replaced
with the NVIDIA one from drm/nouveau_platform.c, as most of the actual
code is now theirs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Doesn't fix any known issue, but best be safe in case control is handed
to us from firmware with these left enabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This ensures we have a valid mask of disabled engines before we start
trying to execute fini()/init() on the subdevs, potentially touching
devices that don't exist.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit requires being able to modify the PRAMIN BAR page
tables while already holding the MMU subdev mutex.
To solve this issue, each VM has been given its own mutex. As a nice
side-effect, this also allows separate VMs to be updated concurrently.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A variety of tweaks to the NVIF library interfaces, mostly ripping out
things that turned out to be not so useful.
- Removed refcounting from nvif_object, callers are expected to not be
stupid instead.
- nvif_client is directly reachable from anything derived from nvif_object,
removing the need for heuristics to locate it
- _new() versions of interfaces, that allocate memory for the object
they construct, have been removed. The vast majority of callers used
the embedded _init() interfaces.
- No longer storing constructor arguments (and the data returned from
nvkm) inside nvif_object, it's more or less unused and just wastes
memory.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Replaces the piece-by-piece (in response to NV_DEVICE ctor args) device
contruction with a once-off all-or-nothing approach, eliminating some
tricky refcounting issues. The partial device init capability was only
required by some tools, and has been moved to probe time instead.
Temporarily removes a workaround for some boards where we need to fiddle
with AGP registers before executing the DEVINIT scripts. A later commit
in this series reinstates it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These require an explicit struct nvkm_gpuobj pointer, unlike the previous
macros which take a void *, and work with any nvkm_object.
New semantics require acquiring/releasing a gpuobj before accessing them,
which will be made use of in later patches to greatly reduce the overhead
of accesses, particularly when a direct mmio mapping of the object is not
available (suspend/resume, out of ioremap() space, and on GK20A).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Joonyoung Shim