Commit Graph

60284 Commits

Author SHA1 Message Date
Kevin Cernekee b6da0ffb09 MIPS: pfn_valid() is broken on low memory HIGHMEM systems
pfn_valid() compares the PFN to max_mapnr:

        __pfn >= min_low_pfn && __pfn < max_mapnr;

On HIGHMEM kernels, highend_pfn is used to set the value of max_mapnr.
Unfortunately, highend_pfn is left at zero if the system does not
actually have enough RAM to reach into the HIGHMEM range.  This causes
pfn_valid() to always return false, and when debug checks are enabled
the kernel will fail catastrophically:

Memory: 22432k/32768k available (2249k kernel code, 10336k reserved, 653k data, 1352k init, 0k highmem)
NR_IRQS:128
kfree_debugcheck: out of range ptr 81c02900h.
Kernel bug detected[#1]:
Cpu 0
$ 0   : 00000000 10008400 00000034 00000000
$ 4   : 8003e160 802a0000 8003e160 00000000
$ 8   : 00000000 0000003e 00000747 00000747
...

On such a configuration, max_low_pfn should be used to set max_mapnr.

This was seen on 2.6.34.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1992/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:52 +01:00
Dezhong Diao e36863a550 MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
[v4: Patch applies to linux-queue.git with kmap_atomic patches:
 https://patchwork.kernel.org/patch/189932/
 https://patchwork.kernel.org/patch/194552/
 https://patchwork.kernel.org/patch/189912/ ]

The MIPS DMA coherency functions do not work properly (i.e. kernel oops)
when HIGHMEM pages are passed in as arguments.  Use kmap_atomic() to
temporarily map high pages for cache maintenance operations.

Tested on a 2.6.36-rc7 1GB HIGHMEM SMP no-alias system.

Signed-off-by: Dezhong Diao <dediao@cisco.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Dezhong Diao <dediao@cisco.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: David VomLehn <dvomlehn@cisco.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1695/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:52 +01:00
Jian Peng d0be89f6c2 MIPS: topdown mmap support
This patch introduced topdown mmap support in user process address
space allocation policy.

Recently, we ran some large applications that use mmap heavily and
lead to OOM due to inflexible mmap allocation policy on MIPS32.

Since most other major archs supported it for years, it is reasonable
to follow the trend and reduce the pain of porting applications.

Due to cache aliasing concern, arch_get_unmapped_area_topdown() and
other helper functions are implemented in arch/mips/kernel/syscall.c.

Signed-off-by: Jian Peng <jipeng2005@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2389/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:51 +01:00
Mathias Krause 3a7136602b MIPS: Remove redundant addr_limit assignment on exec.
The address limit is already set in flush_old_exec() via set_fs(USER_DS)
so this assignment is redundant.

[ralf@linux-mips.org: also see dac853ae89 for
further explanation.]

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2466/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:23:29 +01:00
Florian Fainelli c4a5054161 MIPS: AR7: Replace __attribute__((__packed__)) with __packed
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2491/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-07-25 17:23:20 +01:00
Florian Fainelli 11454100f4 MIPS: AR7: Remove 'space before tabs' in platform.c
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2490/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:22:49 +01:00
Rob Herring 5fd1a2ed0e arm/dt: Add dtb make rule
Add a make rule to compile dt blobs for ARM.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-25 09:52:12 -06:00
Grant Likely 2b4180af3f arm/dt: Add skeleton dtsi file
Contains the bare minimum template required to boot with the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-25 09:52:11 -06:00
Grant Likely 85cad1b0b6 arm/dt: Add dt machine definition
This patch adds a DT_MACHINE_START macro to use instead of
MACHINE_START when creating a machine_desc that supports using the
device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-25 09:52:11 -06:00
Arnd Bergmann 604f4498d0 Merge branch 'tegra/fixes' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/fixes 2011-07-25 17:16:00 +02:00
Michal Simek c9d761b7c4 microblaze: PCI fix typo fault in of_node pointer moving into pci_bus
Bug introduces in:
powerpc/pci: Make both ppc32 and ppc64 use sysdata for pci_controller
(sha1: b5d937de03)

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:25:27 +02:00
Michal Simek ca12adc8ca microblaze: Add support for early console on mdm
Support mdm early console:
 - extend time for retries
 - add mdm compatible property

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:25:26 +02:00
Michal Simek 2aa8e37596 microblaze: Simplify early console binding from DT
Recognize early Linux console from chosen - linux,stdout-path
instead of detecting the first console with appropriate
compatible strings.
This patch solved the problem on system with multiple
consoles.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:25:13 +02:00
Michal Simek e721a45fbe microblaze: Get early printk console earlier
1. Register early console as standard console
2. Enable CON_BOOT console flag to ensure auto-unregistering by the kernel
3. remap_early_printk function remap physical console baseaddr to virtual space

Usage specific function for console remap is done after memory initialization
with IRQ turn off that's why there is not necessary to protect it.

The reason for remapping is that the kernel use TLB 63 for 1:1 address mapping
to be able to use console in very early boot-up phase. But allocating one TLB
just for console caused performance degression that's why ioremaps create new
mapping and TLB 63 is automatically released and ready to use.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Russell King <linux@arm.linux.org.uk>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Alan Cox <alan@linux.intel.com>
CC: <linux-serial@vger.kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
2011-07-25 09:23:47 +02:00
Tomi Valkeinen 6d9f29dd62 OMAP: DSS2: Remove unused code from display.c
oh_core variable is no longer used, so it and its initialization can be
removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:22:06 +03:00
Tomi Valkeinen aea4eb9590 OMAP: DSS2: Remove unused opt_clock_available
opt_clock_available() is no longer needed, so remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:22:05 +03:00
John A. Williams 95ce618f85 microblaze: Standardise cpuinfo output for cache policy
The current cpuinfo output for the cache policy has no leading tag:, making
it difficult to parse.  Add a leaning "Dcache-policy:" tag to this field.

Signed-off-by: John A. Williams <john.williams@petalogix.com>
2011-07-25 09:13:43 +02:00
John A. Williams 8904976e8c microblaze: Unprivileged stream instruction awareness
Add cpuinfo support for the new MicroBlaze option permitting userspace
(unprivileged) access to the streaming instructions (FSL / AXI-stream).

Emit a noisy warning at bootup if this is enabled, because bad user code
can potentially lockup the CPU.

Signed-off-by: John A. Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:13:42 +02:00
Tomi Valkeinen 700dee78dc OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
Initialize get_context_loss_count in the DSS board data to
omap_pm_get_dev_context_loss_count, so that omapdss driver can use it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:08:15 +03:00
Tomi Valkeinen aac927c93b OMAP: DSS2: rewrite use of context_loss_count
The function to get device's context loss count has changed from

omap_pm_get_last_off_on_transaction_id() to
omap_pm_get_dev_context_loss_count()

Change name of the function pointer in omapdss.h accordingly, and use
the term "context loss count" instead of "context id" in the code.

Restructure the context loss count functions to handle errors properly,
and ensure that context is always considered lost if an error happens.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25 10:08:15 +03:00
Michal Simek 5db34eb92f microblaze: trivial: Fix typo fault
descrtiption -> description

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:07:45 +02:00
Mathias Krause a0ec99bda8 microblaze: exec: Remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
2011-07-25 09:07:45 +02:00
Mathias Krause 504a84c480 microblaze: Remove duplicated prototype of start_thread()
The prototype for start_thread() is already present in the MMU/NOMMU
independent part of the file. Remove the duplicate.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:07:45 +02:00
Michal Simek c11389406f microblaze: Fix unaligned value saving to the stack for system with MMU
Several registers weren't saved correctly to the stack.

Unaligned expection for system with MMU stores
value in ex_tmp_data_loc_X address which is load to registers r3.
The next step is to move this value from r3 to a destination
register which caused unaligned exception. For several registers
this value was directly moved to the register.

For example for r28:
by "or r28, r0, r3"

but register r28 was rewritten when kernel returns from exception
handler by value saved on stack.

This patch changed r3 saving to the correct address on the stack.
For example for r28:
by "swi r3, r1, 4 * 28"

When kernel returns from the exception handler, correct value is restored.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25 09:07:45 +02:00
Steven Rostedt a2f526994e microblaze/irqs: Do not trace arch_local_{*,irq_*} functions
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).

Add the notrace notation to prevent them from ever being traced.

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-25 09:07:45 +02:00
Linus Torvalds 8405b044e5 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] s5pv210: make needlessly global symbols static
  [CPUFREQ] exynos4210: make needlessly global symbols static
  [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation
  [CPUFREQ] S5PV210: Add reboot notifier to prevent system hang
  [CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down
  [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency
  [CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable
  [CPUFREQ] S5PV210: Add arm/int voltage control support
  [CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm
  [CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed
  [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq
  [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put
  [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq
  [CPUFREQ] Remove some vi noise that escaped into the Makefile.
  [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/
  [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq
  [CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq
2011-07-24 20:56:18 -07:00
Geert Uytterhoeven 8c9f08f9de m68k: Revive reporting of spurious interrupts
commit 2502b667ea ("Change the m68knommu irq
handling to use the generic irq framework.") removed the reporting of spurious
interrupts on nommu (68328 and 68360).

Bring it back in a generic way, using "atomic_t irq_err_count", as that's what
most of the other architectures are using.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Geert Uytterhoeven 739735d5fe m68knommu: Move forward declaration of do_IRQ() from machdep.h to irq.h
It is not machine-specific, but common irq infrastructure.
Also add the missing asmlinkage, to match its definition.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer 35de674982 m68k: fix some atomic operation asm address modes for ColdFire
The ColdFire processors have a much more limited set of addressing modes
that can be used for most instructions. A number of the atomic operations
have already been fixed to limit the addressing modes used with add and
sub instructions when building for ColdFire. But we missed a few.
Fix the remaining atomic operations to be clean for ColdFire processors.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer f3c23a28ac m68k: use CPU_HAS_NO_BITFIELDS for signal functions
When reworking bitops.h to be clean for all processor types we introduced
a CONFIG_CPU_HAS_NO_BITFIELDS define to signal whether this processor type
supported the bit field instructions. The ARCH_SIG_BITOPS functions for
m68k use these instruction types. We should base the use of these functions
(or the generic versions) on the CONFIG_CPU_HAS_NO_BITFIELDS define.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer 7c946199cd m68k: merge and clean up delay.h files
The real difference between the mmu and non-mmu varients of the delay.h
files has nothing to do with having an mmu or not. It is processor family
differences that means slightly different code. Merge the delay_mm.h and
delay_no.h files back into a single file.

The primarly difference we need to deal with is whether the processor
supports a 32bit * 32bit -> 64bit multiply. Without it we need to do some
shift scaling as well as use a 32bit * 32bit -> 32bit multiply. If building
for a multi-CPU type kernel then we must use the simpler mult/shift scaling.

This version of delay code allows the CPU32 family to use a 64bit mul,
since it supports this instruction, the old code did not.

The changes use macros where appropriate to try and optimize constant sized
udelay times. And it removes the use of a fixed lib function for the non-mmu
case. Code size on typical kernel configurations is similar, or only larger
by a few tens of bytes.

Also removed the unused muldiv() code from delay_mm.h.

Build and run tested on ColdFire and ARAnyM. Build tested only on 68328
and 68360 (CPU32).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer 622e9472dd m68knommu: correctly use trap_init
Currently trap_init() is an empty function for m68knommu. Instead
the vectors are being setup as part of the IRQ initialization.
This is inconsistent with m68k and other architectures.

Change the local init_vectors() to be trap_init(), and init the
vectors at the correct time during startup. This will help merge of
m68k and m68knommu trap code in the furture.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer f4a5437333 m68knommu: merge ColdFire 5206 and 5206e platform code
The ColdFire 5206 and 5206e CPU families are almost identical, we can
easily merge the platform support code for them. All the differences
are dealt with in the current include/asm/5206sim.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:41 +10:00
Greg Ungerer 171d809df1 m68k: merge mmu and non-mmu bitops.h
The following patch merges the mmu and non-mmu versions of the m68k
bitops.h files. Now there is a good deal of difference between the two
files, but none of it is actually an mmu specific difference. It is
all about the specific m68k/coldfire varient we are targeting. So it
makes an awful lot of sense to merge these into a single bitops.h.

There is a number of ways I can see to factor this code. The approach
I have taken here is to keep the various versions of each macro/function
type together. This means that there is some ifdefery with each to handle
each CPU type.

I have added some comments in a couple of appropriate places to try
and make it clear what the differences we are dealing with are.
Specifically the instruction and addressing mode differences we have
to deal with.

The merged form keeps the same underlying optimizations for each CPU
type for all the general bit clear/set/change and find bit operations.
It does switch to using the generic le operations though, instead of
any local varients.

Build tested on ColdFire, 68328, 68360 (which is cpu32) and 68020+.
Run tested on ColdFire and ARAnyM.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-25 11:20:40 +10:00
Greg Ungerer f941f5caa0 m68k: merge MMU and non MMU versions of system.h
The non-MMU m68k targets can use the same asm/system.h as the MMU
targets. So switch the current system_mm.h to be system.h and remove
system_no.h.

The assembly support code for the non-MMU resume functions needs to
be modified to match the now common switch_to() macro. Specifically
this means correctly saving and restoring the status flags in the case
of the ColdFire resume, and some reordering of the code to not use
registers before they are saved or after they are restored.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:40 +10:00
Greg Ungerer 10f939ff3a m68k: merge MMU and non-MMU versions of asm/hardirq.h
The contents of asm/hardirq.h are pretty strait forward for both the
MMU (hardirq_mm.h) and non-MMU (hardirq_no.h) include files. Merge the
two back into a single file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:40 +10:00
Greg Ungerer a66af29876 m68k: merge the non-mmu and mmu versions of module.c
The non-mmu and mmu versions of the module loader module.c are
nearly identical. Merge them back to a single module.c. There is
a little bit of re-ordering of the struct and enum definitions in
module.h to keep the ifdefery to a minimum.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 11:20:40 +10:00
Geert Uytterhoeven 6617eaf33d m68knommu: Fix printk() format in free_initrd_mem()
arch/m68k/mm/init_no.c:123: warning: format "%d" expects type "int", but argument 2 has type "long unsigned int"

And use pr_notice() while we're at it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 10:44:04 +10:00
Geert Uytterhoeven 45d1564cce m68knommu: Make empty_zero_page "void *", like on m68k
This allows to get rid of the casts.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25 10:44:04 +10:00
Daniel Drake 07d5b38e14 x86, olpc-xo15-sci: Enable EC wakeup capability
Some recent changes to the way that ACPI handles wakeup flags
means that the XO15EC ACPI device is not wakeup-capable by
default so device_set_wakeup_enable() does nothing.

Use device_init_wakeup() to mark the device as wakeup capable,
and to enable wakeups.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/20110724173430.BE03C9D401C@zog.reactivated.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-24 20:16:05 +02:00
Daniel Drake d8d01a6378 x86, olpc: Fix dependency on POWER_SUPPLY
As reported by Randy Dunlap, CONFIG_POWER_SUPPLY=m caused a
compile error:

  arch/x86/built-in.o: In function `battery_status_changed':
   olpc-xo15-sci.c:(.text+0x3acdd): undefined reference to `power_supply_get_by_name'
   olpc-xo15-sci.c:(.text+0x3ad04): undefined reference to `power_supply_changed'

The SCI drivers, as bool, require POWER_SUPPLY to be builtin.
Use select to make that a hard requirement and avoid this build
failure.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-24 20:14:44 +02:00
Linus Torvalds b6844e8f64 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits)
  ARM: 7004/1: fix traps.h compile warnings
  ARM: 6998/2: kernel: use proper memory barriers for bitops
  ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
  ARM: Fix build errors caused by adding generic macros
  ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU
  ARM: CPU hotplug: pass in proper affinity mask on IRQ migration
  ARM: GIC: avoid routing interrupts to offline CPUs
  ARM: CPU hotplug: fix abuse of irqdesc->node
  ARM: 6981/2: mmci: adjust calculation of f_min
  ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
  ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
  ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
  ARM: ARM_DMA_ZONE_SIZE is no more
  ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ...
2011-07-24 10:20:54 -07:00
Linus Torvalds 21c7075fa5 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits)
  [S390] use siginfo for sigtrap signals
  [S390] dasd: add enhanced DASD statistics interface
  [S390] kvm: make sigp emerg smp capable
  [S390] disable cpu measurement alerts on a dying cpu
  [S390] initial cr0 bits
  [S390] iucv cr0 enablement bit
  [S390] race safe external interrupt registration
  [S390] remove tape block docu
  [S390] ap: toleration support for ap device type 10
  [S390] cleanup program check handler prototypes
  [S390] remove kvm mmu reload on s390
  [S390] Use gmap translation for accessing guest memory
  [S390] use gmap address spaces for kvm guest images
  [S390] kvm guest address space mapping
  [S390] fix s390 assembler code alignments
  [S390] move sie code to entry.S
  [S390] kvm: handle tprot intercepts
  [S390] qdio: clear shared DSCI before scheduling the queue handler
  [S390] reference bit testing for unmapped pages
  [S390] irqs: Do not trace arch_local_{*,irq_*} functions
  ...
2011-07-24 09:55:45 -07:00
Linus Torvalds ff0c4ad2c3 Merge branch 'for-upstream' of git://openrisc.net/jonas/linux
* 'for-upstream' of git://openrisc.net/jonas/linux: (24 commits)
  OpenRISC: Add MAINTAINERS entry
  OpenRISC: Miscellaneous
  OpenRISC: Library routines
  OpenRISC: Headers
  OpenRISC: Traps
  OpenRISC: Module support
  OpenRISC: GPIO
  OpenRISC: Scheduling/Process management
  OpenRISC: Idle/Power management
  OpenRISC: System calls
  OpenRISC: IRQ
  OpenRISC: Timekeeping
  OpenRISC: DMA
  OpenRISC: PTrace
  OpenRISC: Build infrastructure
  OpenRISC: Signal handling
  OpenRISC: Memory management
  OpenRISC: Device tree
  OpenRISC: Boot code
  iomap: make IOPORT/PCI mapping functions conditional
  ...
2011-07-24 09:55:18 -07:00
Linus Torvalds fcda12e7f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: Fix modpost's license checking V3
  module: add /sys/module/<name>/uevent files
  module: change attr callbacks to take struct module_kobject
  modules: make arch's use default loader hooks
  modules: add default loader hook implementations
  param: fix return value handling in param_set_*
2011-07-24 09:54:54 -07:00
Linus Torvalds 5fabc487c9 Merge branch 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
  KVM: IOMMU: Disable device assignment without interrupt remapping
  KVM: MMU: trace mmio page fault
  KVM: MMU: mmio page fault support
  KVM: MMU: reorganize struct kvm_shadow_walk_iterator
  KVM: MMU: lockless walking shadow page table
  KVM: MMU: do not need atomicly to set/clear spte
  KVM: MMU: introduce the rules to modify shadow page table
  KVM: MMU: abstract some functions to handle fault pfn
  KVM: MMU: filter out the mmio pfn from the fault pfn
  KVM: MMU: remove bypass_guest_pf
  KVM: MMU: split kvm_mmu_free_page
  KVM: MMU: count used shadow pages on prepareing path
  KVM: MMU: rename 'pt_write' to 'emulate'
  KVM: MMU: cleanup for FNAME(fetch)
  KVM: MMU: optimize to handle dirty bit
  KVM: MMU: cache mmio info on page fault path
  KVM: x86: introduce vcpu_mmio_gva_to_gpa to cleanup the code
  KVM: MMU: do not update slot bitmap if spte is nonpresent
  KVM: MMU: fix walking shadow page table
  KVM guest: KVM Steal time registration
  ...
2011-07-24 09:07:03 -07:00
Linus Torvalds c61264f98c Merge branch 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/trace: use class for multicall trace
  xen/trace: convert mmu events to use DECLARE_EVENT_CLASS()/DEFINE_EVENT()
  xen/multicall: move *idx fields to start of mc_buffer
  xen/multicall: special-case singleton hypercalls
  xen/multicalls: add unlikely around slowpath in __xen_mc_entry()
  xen/multicalls: disable MC_DEBUG
  xen/mmu: tune pgtable alloc/release
  xen/mmu: use extend_args for more mmuext updates
  xen/trace: add tlb flush tracepoints
  xen/trace: add segment desc tracing
  xen/trace: add xen_pgd_(un)pin tracepoints
  xen/trace: add ptpage alloc/release tracepoints
  xen/trace: add mmu tracepoints
  xen/trace: add multicall tracing
  xen/trace: set up tracepoint skeleton
  xen/multicalls: remove debugfs stats
  trace/xen: add skeleton for Xen trace events
2011-07-24 09:06:47 -07:00
Linus Torvalds a23a334bd5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (34 commits)
  crypto: caam - ablkcipher support
  crypto: caam - faster aead implementation
  crypto: caam - structure renaming
  crypto: caam - shorter names
  crypto: talitos - don't bad_key in ablkcipher setkey
  crypto: talitos - remove unused giv from ablkcipher methods
  crypto: talitos - don't set done notification in hot path
  crypto: talitos - ensure request ordering within a single tfm
  crypto: gf128mul - fix call to memset()
  crypto: s390 - support hardware accelerated SHA-224
  crypto: algif_hash - Handle initial af_alg_make_sg error correctly
  crypto: sha1_generic - use SHA1_BLOCK_SIZE
  hwrng: ppc4xx - add support for ppc4xx TRNG
  crypto: crypto4xx - Perform read/modify/write on device control register
  crypto: caam - fix build warning when DEBUG_FS not configured
  crypto: arc4 - Fixed coding style issues
  crypto: crc32c - Fixed coding style issue
  crypto: omap-sham - do not schedule tasklet if there is no active requests
  crypto: omap-sham - clear device flags when finishing request
  crypto: omap-sham - irq handler must not clear error code
  ...
2011-07-24 09:05:32 -07:00
Al Viro e55d92b92d get rid of create_proc_entry() abuses - proc_mkdir() is there for purpose
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-24 10:12:33 -04:00
Jonas Bonn 66574cc054 modules: make arch's use default loader hooks
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-24 22:06:04 +09:30
Xiao Guangrong 4f0226482d KVM: MMU: trace mmio page fault
Add tracepoints to trace mmio page fault

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:41 +03:00
Xiao Guangrong ce88decffd KVM: MMU: mmio page fault support
The idea is from Avi:

| We could cache the result of a miss in an spte by using a reserved bit, and
| checking the page fault error code (or seeing if we get an ept violation or
| ept misconfiguration), so if we get repeated mmio on a page, we don't need to
| search the slot list/tree.
| (https://lkml.org/lkml/2011/2/22/221)

When the page fault is caused by mmio, we cache the info in the shadow page
table, and also set the reserved bits in the shadow page table, so if the mmio
is caused again, we can quickly identify it and emulate it directly

Searching mmio gfn in memslots is heavy since we need to walk all memeslots, it
can be reduced by this feature, and also avoid walking guest page table for
soft mmu.

[jan: fix operator precedence issue]

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:40 +03:00
Xiao Guangrong dd3bfd59db KVM: MMU: reorganize struct kvm_shadow_walk_iterator
Reorganize it for good using the cache

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:39 +03:00
Xiao Guangrong c2a2ac2b56 KVM: MMU: lockless walking shadow page table
Use rcu to protect shadow pages table to be freed, so we can safely walk it,
it should run fastly and is needed by mmio page fault

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:38 +03:00
Xiao Guangrong 603e0651cf KVM: MMU: do not need atomicly to set/clear spte
Now, the spte is just from nonprsent to present or present to nonprsent, so
we can use some trick to set/clear spte non-atomicly as linux kernel does

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:37 +03:00
Xiao Guangrong 1df9f2dc39 KVM: MMU: introduce the rules to modify shadow page table
Introduce some interfaces to modify spte as linux kernel does:
- mmu_spte_clear_track_bits, it set the spte from present to nonpresent, and
  track the stat bits(accessed/dirty) of spte
- mmu_spte_clear_no_track, the same as mmu_spte_clear_track_bits except
  tracking the stat bits
- mmu_spte_set, set spte from nonpresent to present
- mmu_spte_update, only update the stat bits

Now, it does not allowed to set spte from present to present, later, we can
drop the atomicly opration for X86_32 host, and it is the preparing work to
get spte on X86_32 host out of the mmu lock

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:36 +03:00
Xiao Guangrong d7c55201e6 KVM: MMU: abstract some functions to handle fault pfn
Introduce handle_abnormal_pfn to handle fault pfn on page fault path,
introduce mmu_invalid_pfn to handle fault pfn on prefetch path

It is the preparing work for mmio page fault support

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:35 +03:00
Xiao Guangrong fce92dce79 KVM: MMU: filter out the mmio pfn from the fault pfn
If the page fault is caused by mmio, the gfn can not be found in memslots, and
'bad_pfn' is returned on gfn_to_hva path, so we can use 'bad_pfn' to identify
the mmio page fault.
And, to clarify the meaning of mmio pfn, we return fault page instead of bad
page when the gfn is not allowd to prefetch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:34 +03:00
Xiao Guangrong c37079586f KVM: MMU: remove bypass_guest_pf
The idea is from Avi:
| Maybe it's time to kill off bypass_guest_pf=1.  It's not as effective as
| it used to be, since unsync pages always use shadow_trap_nonpresent_pte,
| and since we convert between the two nonpresent_ptes during sync and unsync.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:33 +03:00
Xiao Guangrong bd4c86eaa6 KVM: MMU: split kvm_mmu_free_page
Split kvm_mmu_free_page to kvm_mmu_isolate_page and
kvm_mmu_free_page

One is used to remove the page from cache under mmu lock and the other is
used to free page table out of mmu lock

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:32 +03:00
Xiao Guangrong aa6bd187af KVM: MMU: count used shadow pages on prepareing path
Move counting used shadow pages from commiting path to preparing path to
reduce tlb flush on some paths

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:31 +03:00
Xiao Guangrong b90a0e6c81 KVM: MMU: rename 'pt_write' to 'emulate'
If 'pt_write' is true, we need to emulate the fault. And in later patch, we
need to emulate the fault even though it is not a pt_write event, so rename
it to better fit the meaning

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:30 +03:00
Xiao Guangrong b36c7a7c10 KVM: MMU: cleanup for FNAME(fetch)
gw->pte_access is the final access permission, since it is unified with
gw->pt_access when we walked guest page table:

FNAME(walk_addr_generic):
	pte_access = pt_access & FNAME(gpte_access)(vcpu, pte, true);

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:29 +03:00
Xiao Guangrong 640d9b0dbe KVM: MMU: optimize to handle dirty bit
If dirty bit is not set, we can make the pte access read-only to avoid handing
dirty bit everywhere

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:27 +03:00
Xiao Guangrong bebb106a5a KVM: MMU: cache mmio info on page fault path
If the page fault is caused by mmio, we can cache the mmio info, later, we do
not need to walk guest page table and quickly know it is a mmio fault while we
emulate the mmio instruction

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:26 +03:00
Xiao Guangrong af7cc7d1ee KVM: x86: introduce vcpu_mmio_gva_to_gpa to cleanup the code
Introduce vcpu_mmio_gva_to_gpa to translate the gva to gpa, we can use it
to cleanup the code between read emulation and write emulation

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:25 +03:00
Xiao Guangrong ffb61bb3bc KVM: MMU: do not update slot bitmap if spte is nonpresent
Set slot bitmap only if the spte is present

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:24 +03:00
Xiao Guangrong 052331bea3 KVM: MMU: fix walking shadow page table
Properly check the last mapping, and do not walk to the next level if last spte
is met

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:23 +03:00
Glauber Costa d910f5c106 KVM guest: KVM Steal time registration
This patch implements the kvm bits of the steal time infrastructure.
The most important part of it, is the steal time clock. It is an
continuous clock that shows the accumulated amount of steal time
since vcpu creation. It is supposed to survive cpu offlining/onlining.

[marcelo: fix build with CONFIG_KVM_GUEST=n]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Avi Kivity <avi@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-24 11:49:36 +03:00
Martin Schwidefsky 73b7d40ff1 [S390] use siginfo for sigtrap signals
Provide additional information on SIGTRAP by using a sig_info signal.
Use TRAP_BRKPT for breakpoints via illegal operation and TRAP_HWBKPT
for breakpoints via program event recording. Provide the address of
the instruction that caused the breakpoint via si_addr.
While we are at it get rid of tracehook_consider_fatal_signal.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:23 +02:00
Christian Ehrhardt 8bb3a2ebcf [S390] kvm: make sigp emerg smp capable
SIGP emerg needs to pass the source vpu adress into __LC_CPU_ADDRESS of the
target guest.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:22 +02:00
Jan Glauber cadfce7277 [S390] disable cpu measurement alerts on a dying cpu
The cpu measurement alerts that are used for instance by oprofile
for hardware sampling are not turned off on a cpu that is going
offline. Add the appropriate control register bit that should be
disabled to the list.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:22 +02:00
Martin Schwidefsky c76e70d378 [S390] initial cr0 bits
Remove outdated bits from the initial cr0 register.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:22 +02:00
Martin Schwidefsky 5beab99100 [S390] iucv cr0 enablement bit
Do not set the cr0 enablement bit for iucv by default in head[31|64].S,
move the enablement to iucv_init in the iucv base layer.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:22 +02:00
Jan Glauber 89c9b66b10 [S390] race safe external interrupt registration
The (un-)register_external_interrupt functions are not race safe if
more than one interrupt handler is added or deleted for an external
interrupt concurrently.

Make the registration / unregistration of external interrupts race safe
by using RCU and a spinlock. RCU is used to avoid a performance penalty
in the external interrupt handler, the register and unregister functions
are protected by the spinlock and are not performance critical.
call_rcu must be used since the SCLP driver uses the interface with
IRQs disabled. Also use the generic list implementation rather than
homebrewn list code.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:22 +02:00
Martin Schwidefsky fdb204d1a7 [S390] cleanup program check handler prototypes
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Carsten Otte f7850c9288 [S390] remove kvm mmu reload on s390
This patch removes the mmu reload logic for kvm on s390. Via Martin's
new gmap interface, we can safely add or remove memory slots while
guest CPUs are in-flight. Thus, the mmu reload logic is not needed
anymore.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Carsten Otte 092670cd90 [S390] Use gmap translation for accessing guest memory
This patch removes kvm-s390 internal assumption of a linear mapping
of guest address space to user space. Previously, guest memory was
translated to user addresses using a fixed offset (gmsor). The new
code uses gmap_fault to resolve guest addresses.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Carsten Otte 598841ca99 [S390] use gmap address spaces for kvm guest images
This patch switches kvm from using (Qemu's) user address space to
Martin's gmap address space. This way QEMU does not have to use a
linker script in order to fit large guests at low addresses in its
address space.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Martin Schwidefsky e5992f2e6c [S390] kvm guest address space mapping
Add code that allows KVM to control the virtual memory layout that
is seen by a guest. The guest address space uses a second page table
that shares the last level pte-tables with the process page table.
If a page is unmapped from the process page table it is automatically
unmapped from the guest page table as well.

The guest address space mapping starts out empty, KVM can map any
individual 1MB segments from the process virtual memory to any 1MB
aligned location in the guest virtual memory. If a target segment in
the process virtual memory does not exist or is unmapped while a
guest mapping exists the desired target address is stored as an
invalid segment table entry in the guest page table.
The population of the guest page table is fault driven.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Jan Glauber 144d634a21 [S390] fix s390 assembler code alignments
The alignment is missing for various global symbols in s390 assembly code.
With a recent gcc and an instruction like stgrl this can lead to a
specification exception if the instruction uses such a mis-aligned address.

Specify the alignment explicitely and while add it define __ALIGN for s390
and use the ENTRY define to save some lines of code.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Martin Schwidefsky 603d1a50ac [S390] move sie code to entry.S
The entry to / exit from sie has subtle dependencies to the first level
interrupt handler. Move the sie assembler code to entry64.S and replace
the SIE_HOOK callback with a test and the new _TIF_SIE bit.
In addition this patch fixes several problems in regard to the check for
the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing
the interrupt handler and it only modified the instruction address if it
pointed directly to the sie instruction. In both cases it could miss
a TIF bit that normally would cause an exit from the guest and would
reenter the guest context.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:21 +02:00
Christian Borntraeger bb25b9ba3e [S390] kvm: handle tprot intercepts
When running a kvm guest we can get intercepts for tprot, if the host
page table is read-only or not populated. This patch implements the
most common case (linux memory detection).
This also allows host copy on write for guest memory on newer systems.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:20 +02:00
Steven Rostedt f433c4aec9 [S390] irqs: Do not trace arch_local_{*,irq_*} functions
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).

Add the notrace notation to prevent them from ever being traced.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 10:48:00 +02:00
Linus Torvalds 6d6be43d4d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (43 commits)
  Blackfin: spi-docs: further clarify GPIO CS behavior with various modes
  Blackfin: boards: fix pcm device name
  Blackfin: SMP: punt unused atomic_test_mask helper
  Blackfin: irqs: do not trace arch_local_{*,irq_*} functions
  Blackfin: bf526: restrict reboot workaround to 0.0 silicon
  Blackfin: bf51x: fix alternative portmux options
  Blackfin: bf54x: fix GPIO resume code
  Blackfin: dpmc: optimize SDRAM programming slightly
  Blackfin: dpmc: don't save/restore scratch registers
  Blackfin: bf538: pull gpio/port logic out of core hibernate paths
  Blackfin: dpmc: optimize hibernate/resume path
  Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating
  Blackfin: dpmc: relocate hibernate helper macros
  Blackfin: dpmc: omit RETE/RETN when hibernating
  Blackfin: dpmc: optimize SIC_IWR programming a little
  Blackfin: gpio/ints: generalize pint logic
  Blackfin: dpmc: bind to MMR names and not CPUs
  Blackfin: debug-mmrs: generalize pint logic
  Blackfin: bf54x: switch to common pint MMR struct
  Blackfin: bf54x: tweak MMR pint names
  ...
2011-07-23 14:05:44 -07:00
Linus Torvalds b4db920c7f Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', 'x86-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hyper: Change hypervisor detection order

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix DNA exception during check_fpu()

* 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kexec, x86: Fix incorrect jump back address if not preserving context

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, config: Introduce an INTEL_MID configuration

* 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, quirks: Use pci_dev->revision

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: tsc: Remove unneeded DMI-based blacklisting

* 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit
2011-07-23 10:38:21 -07:00
Linus Torvalds 7080d30676 Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, build: Do not set the root_dev field in bzImage
2011-07-23 10:36:09 -07:00
Linus Torvalds 148a7b1725 Merge branch 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Add support for cmpxchg_double
2011-07-23 10:35:43 -07:00
Linus Torvalds 9d0715630e Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: apb: Share APB timer code with other platforms
2011-07-23 10:34:47 -07:00
Linus Torvalds c0c463d34a Merge branches 'x86-urgent-for-linus', 'core-debug-for-linus', 'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Remove unused CHECK_IRQ_PER_CPU()

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools, x86: Fix 32-bit compile on 64-bit system
2011-07-23 10:33:08 -07:00
Ohad Ben-Cohen e72542191c virtio: expose for non-virtualization users too
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.

Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.

Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.

The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.

This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.

Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-23 16:20:30 +09:30
Scott Jiang 2b6678c552 Blackfin: boards: fix pcm device name
The pcm driver name has been changed, but the device name has not.

Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:34 -04:00
Mike Frysinger 6ebc2bb92a Blackfin: SMP: punt unused atomic_test_mask helper
No one uses this func, so just punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:34 -04:00
Steven Rostedt a2de3f79b1 Blackfin: irqs: do not trace arch_local_{*,irq_*} functions
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).

Add the notrace notation to prevent them from ever being traced.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:33 -04:00
Mike Frysinger b0d3dc1291 Blackfin: bf526: restrict reboot workaround to 0.0 silicon
The bug in the BF526 rom when doing a software reset exists only in older
silicon versions, so don't clear SWRST on newer parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:33 -04:00
Mike Frysinger 65cd3b5362 Blackfin: bf51x: fix alternative portmux options
The BF51x's alternative portmux Kconfig options were copy & pasted from
the BF52x, but never tweaked to reflect it.  So drop the old options as
they were never used (and were simply wrong), and add the BF51x specific
pieces to the Kconfig and header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00
Mike Frysinger fdfb0becea Blackfin: bf54x: fix GPIO resume code
Back in commit c03c2a8734, we fixed logic in the non-bf54x
GPIO resume code to set the data levels properly before the direction
to avoid spurious line glitches.  But we missed the bf54x code paths.
So add the same fix there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00
Mike Frysinger 9e770f7780 Blackfin: dpmc: optimize SDRAM programming slightly
No need to reload these registers constantly since they're always
available (we're not making any function calls in between).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:31 -04:00
Mike Frysinger da31d6fb46 Blackfin: dpmc: don't save/restore scratch registers
The Blackfin C ABI says we do not need to save/restore R0-R3 and P0-P2
as they are available as scratch registers.  So don't bother.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:31 -04:00
Mike Frysinger 9466a0510a Blackfin: bf538: pull gpio/port logic out of core hibernate paths
Re-architect how we save/restore the gpio/port logic that only pertains
to bf538/bf539 parts by pulling it out of the core code paths and pushing
it out to bf538-specific locations.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:30 -04:00
Mike Frysinger eed7b83658 Blackfin: dpmc: optimize hibernate/resume path
The current save logic used in hibernation is to do a MMR load (base +
offset) into a register, and then push that onto the stack.  Then when
restoring, pop off the stack into a register followed by a MMR store
(base + offset).  These use plenty of 32bit insns rather than 16bit,
are pretty long winded, and full of pipeline bubbles.

So, by taking advantage of MMRs that are contiguous, the multi-register
push/pop insn, and register abuse, we can shrink this code considerably.

When saving, the new logic does a lot of loads into the data and pointer
registers before executing a single multi-register push insn.  Then when
restoring, we do a single multi-register pop insn followed by a lot of
stores.  Overall, this allows us to cut the insn count by ~30%, the code
size by ~45%, and drastically reduce the register hazards that trigger
bubbles in the pipeline.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:29 -04:00
Mike Frysinger d7228e7eb9 Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating
EVT0 is for emulation, EVT1 is for reset, and EVT4 is the "global int
disable" region.  None of these are used by software (or even hardware),
so don't bother saving/restoring them when we hibernate since nothing
ever uses these in Linux (the only thing they would be useful for is
core-memory scratch, but that's just crazy talk).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:29 -04:00
Mike Frysinger 584ecbaa25 Blackfin: dpmc: relocate hibernate helper macros
This defines only get used in the hibernate code, so remove them from the
global dpmc header as no one else cares.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:28 -04:00
Mike Frysinger 429e257ea3 Blackfin: dpmc: omit RETE/RETN when hibernating
The RETE/RETN registers are only used in emulation(JTAG) and NMI nodes,
or as scratch registers, neither of which need to be saved/restored as
this code doesn't execute at those core event levels.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:28 -04:00
Mike Frysinger 4705a25c06 Blackfin: dpmc: optimize SIC_IWR programming a little
For parts with more than one SIC_IWR, we can optimize the writing
a little bit using better Blackfin insns.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:27 -04:00
Mike Frysinger 01f8e34c98 Blackfin: gpio/ints: generalize pint logic
Have the logic that uses peripheral interrupt blocks key off of pint
defines rather than CPU names so that things are generalized across
families.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:27 -04:00
Mike Frysinger 85c2737ae7 Blackfin: dpmc: bind to MMR names and not CPUs
Have the code work off of MMR names rather than CPU defines so there is
less code to tweak in the future with new parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:26 -04:00
Mike Frysinger 0a7e5413ca Blackfin: debug-mmrs: generalize pint logic
Don't bind the code to specific CPU defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:26 -04:00
Mike Frysinger 82ed5f73ed Blackfin: bf54x: switch to common pint MMR struct
We have a struct in the headers describing the register layout, so
drop the local duplicate one.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:25 -04:00
Mike Frysinger b69c920cb1 Blackfin: bf54x: tweak MMR pint names
The hardware block uses the name "request" rather than "irq", so update
the struct accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:25 -04:00
Mike Frysinger b0759a4d23 Blackfin: bf54x: constify pint register array
The array of pointers to register blocks never changes, so constify it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:24 -04:00
Mike Frysinger 1a9e5bfbd4 Blackfin: gpio: punt unused GPIO_# defines
These defines don't accomplish much as GPIO_# is the same thing as #.
Each CPU already provides helpful symbolic defines like GPIO_<PIN>
which everyone uses, so just punt these # ones.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:24 -04:00
Mike Frysinger 969564508d Blackfin: convert unicode space gremlins
Not sure how these guys slipped in, but they're annoying me.
So bring these unicode space gremlins down to earth to normal
ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:23 -04:00
Mike Frysinger 006669ec21 Blackfin: pwm: implement linux/pwm.h API
For now, this only supports gptimers.  Support for dedicated PWM devices
as found on newer parts to come.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:23 -04:00
Mike Frysinger e1b5596533 Blackfin: gptimers: add enable/disable by timer id
The API is geared around timer ids, except for the act of enabling
and disabling timers.  So add a small helper to fill out the gap.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:22 -04:00
Steven Miao 353470cc50 Blackfin: make sure percpu section is aligned in XIP builds
The alignment is normally handled by PERCPU(), but we need to do it
ourselves in the XIP build due to the custom layout.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:22 -04:00
Mike Frysinger 997f95e190 Blackfin: gptimers: use bfin read/write helpers
Use proper helper macros for reading/writing the MMRs rather than
volatile markings on the struct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger 24a6b91f69 Blackfin: gptimers: use register structs from common header
Now that asm/gptimers.h has the hardware register struct layout, there's
no need to duplicate things locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger af459864b3 Blackfin: debug-mmrs: use new gptimer_group layout to simplify code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mike Frysinger 94674b15df Blackfin: debug-mmrs: prevent macro arg from expanding
Passing a non-simple expression in as the addr arg could incorrectly
apply the pointer cast resulting in misbehavior.  Add proper paren.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mike Frysinger 7595ac0711 Blackfin: gptimers: add group structure for hardware register layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:19 -04:00
Mathias Krause a64b384818 Blackfin: exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger 979365ba4e Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger 4e12b08b72 Blackfin: bf561-ezkit: change parallel flash from M to Y in defconfig
These flashes are always on the board, so might as well enable them by
default rather than a module.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Mike Frysinger e14062563c Blackfin: debug-mmrs: disable PERIPHERAL_MAP for IMDMA channels
The documentation for the IMDMA channels appears to be incorrect.
These DMA blocks don't actually have PERIPHERAL_MAP MMRs for us
to access.  Attempts to do so lead to system mmr hardware errors.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Mike Frysinger ef0531b2e4 Blackfin: debug-mmrs: fix typo in single dmac setup
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:44 -04:00
Mike Frysinger 50f92aa334 Blackfin: convert to asm-generic/mutex-dec.h for all systems
The Blackfin mutex.h is merely a copy of an older asm-generic/mutex-dec.h,
so punt it and just use the common one directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger fb1d9be596 Blackfin: optimize double fault boot checking
This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger 072a5cff2f Blackfin: time: replace magic numbers with defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger b648072d3e Blackfin: SMP: optimize start up code a bit
This just imports all of the optimization work done in the
common startup code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger 2f7d63f909 Blackfin: boards: clean up redundant/dead spi resources
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant.  So punt
those parts.

Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger 9be8631b8a Blackfin: net2272: move pin setup to boards files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger c6cb13f9fe Blackfin: convert to kbuild asm-generic support
No need for one line header stubs.  Just declare it in Kbuild.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 00:41:23 -04:00
Linus Torvalds bbd9d6f7fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
2011-07-22 19:02:39 -07:00
Linus Torvalds 8e204874db Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, vdso: Do not allocate memory for the vDSO
  clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option
  x86, vdso: Drop now wrong comment
  Document the vDSO and add a reference parser
  ia64: Replace clocksource.fsys_mmio with generic arch data
  x86-64: Move vread_tsc and vread_hpet into the vDSO
  clocksource: Replace vread with generic arch data
  x86-64: Add --no-undefined to vDSO build
  x86-64: Allow alternative patching in the vDSO
  x86: Make alternative instruction pointers relative
  x86-64: Improve vsyscall emulation CS and RIP handling
  x86-64: Emulate legacy vsyscalls
  x86-64: Fill unused parts of the vsyscall page with 0xcc
  x86-64: Remove vsyscall number 3 (venosys)
  x86-64: Map the HPET NX
  x86-64: Remove kernel.vsyscall64 sysctl
  x86-64: Give vvars their own page
  x86-64: Document some of entry_64.S
  x86-64: Fix alignment of jiffies variable
2011-07-22 17:05:15 -07:00
Linus Torvalds 3e0b8df79d Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Correct UV2 BAU destination timeout
  x86, UV: Correct failed topology memory leak
  x86, UV: Remove cpumask_t from the stack
  x86, UV: Rename hubmask to pnmask
  x86, UV: Correct reset_with_ipi()
  x86, UV: Allow for non-consecutive sockets
  x86, UV: Inline header file functions
  x86, UV: Fix smp_processor_id() use in a preemptable region
  x66, UV: Enable 64-bit ACPI MFCG support for SGI UV2 platform
  x86, UV: Clean up uv_mmrs.h
2011-07-22 17:04:55 -07:00
Linus Torvalds 8051207959 Merge branch 'x86-signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Kill handle_signal()->set_fs()
  x86, do_signal: Simplify the TS_RESTORE_SIGMASK logic
  x86, signals: Convert the X86_32 code to use set_current_blocked()
  x86, signals: Convert the IA32_EMULATION code to use set_current_blocked()
2011-07-22 17:04:32 -07:00
Linus Torvalds 9e39264ed4 Merge branch 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, numa: Implement pfn -> nid mapping granularity check
  x86, mm: s/PAGES_PER_ELEMENT/PAGES_PER_SECTION/
2011-07-22 17:04:18 -07:00
Linus Torvalds dc43d9fa73 Merge branch 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mtrr: Use pci_dev->revision
  x86, mtrr: use stop_machine APIs for doing MTRR rendezvous
  stop_machine: implement stop_machine_from_inactive_cpu()
  stop_machine: reorganize stop_cpus() implementation
  x86, mtrr: lock stop machine during MTRR rendezvous sequence
2011-07-22 17:04:04 -07:00
Linus Torvalds 80775068db Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Fix section header size check
  x86, microcode, AMD: Correct buf references
2011-07-22 17:03:52 -07:00
Linus Torvalds 7c6582b28a Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Use mce_sysdev_ prefix to group functions
  x86, mce: Use mce_chrdev_ prefix to group functions
  x86, mce: Cleanup mce_read()
  x86, mce: Cleanup mce_create()/remove_device()
  x86, mce: Check the result of ancient_init()
  x86, mce: Introduce mce_gather_info()
  x86, mce: Replace MCM_ with MCI_MISC_
  x86, mce: Replace MCE_SELF_VECTOR by irq_work
  x86, mce, severity: Clean up trivial coding style problems
  x86, mce, severity: Cleanup severity table
  x86, mce, severity: Make formatting a bit more readable
  x86, mce, severity: Fix two severities table signatures
2011-07-22 17:03:40 -07:00
Linus Torvalds 227ad9bc07 Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, efi: Properly pre-initialize table pointers
  x86, efi: Add infrastructure for UEFI 2.0 runtime services
  x86, efi: Fix argument types for SetVariable()
2011-07-22 17:03:14 -07:00
Linus Torvalds 35b004cce1 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, intel, power: Correct the MSR_IA32_ENERGY_PERF_BIAS message
  x86, msr: Fix typo in ENERGY_PERF_BIAS_POWERSAVE
  x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS
2011-07-22 17:02:54 -07:00
Linus Torvalds 0a613b647b Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, smpboot: Mark the names[] array in __inquire_remote_apic() as const
  x86: Convert vmalloc()+memset() to vzalloc()
2011-07-22 17:02:38 -07:00
Linus Torvalds eb47418dc5 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix write lock scalability 64-bit issue
  x86: Unify rwsem assembly implementation
  x86: Unify rwlock assembly implementation
  x86, asm: Fix binutils 2.16 issue with __USER32_CS
  x86, asm: Cleanup thunk_64.S
  x86, asm: Flip RESTORE_ARGS arguments logic
  x86, asm: Flip SAVE_ARGS arguments logic
  x86, asm: Thin down SAVE/RESTORE_* asm macros
2011-07-22 17:02:24 -07:00
Linus Torvalds 2c9e88a108 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled
  x86, ioapic: Print IRTE when IR is enabled
  x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR
  x86, ioapic: Also print Dest field
  x86, ioapic: Format clean up for IOAPIC output
  x86: print APIC data a little later during boot
2011-07-22 17:02:07 -07:00
Linus Torvalds 52de84f3f3 Merge branch 'timers-rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Serialize EFI time accesses on rtc_lock
  x86: Serialize SMP bootup CMOS accesses on rtc_lock
  rtc: stmp3xxx: Remove UIE handlers
  rtc: stmp3xxx: Get rid of mach-specific accessors
  rtc: stmp3xxx: Initialize drvdata before registering device
  rtc: stmp3xxx: Port stmp-functions to mxs-equivalents
  rtc: stmp3xxx: Restore register definitions
  rtc: vt8500: Use define instead of hardcoded value for status bit
2011-07-22 16:52:39 -07:00
Linus Torvalds a99a7d1436 Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mips: Fix i8253 clockevent fallout
  i8253: Cleanup outb/inb magic
  arm: Footbridge: Use common i8253 clockevent
  mips: Use common i8253 clockevent
  x86: Use common i8253 clockevent
  i8253: Create common clockevent implementation
  i8253: Export i8253_lock unconditionally
  pcpskr: MIPS: Make config dependencies finer grained
  pcspkr: Cleanup Kconfig dependencies
  i8253: Move remaining content and delete asm/i8253.h
  i8253: Consolidate definitions of PIT_LATCH
  x86: i8253: Consolidate definitions of global_clock_event
  i8253: Alpha, PowerPC: Remove unused asm/8253pit.h
  alpha: i8253: Cleanup remaining users of i8253pit.h
  i8253: Remove I8253_LOCK config
  i8253: Make pcsp sound driver use the shared i8253_lock
  i8253: Make pcspkr input driver use the shared i8253_lock
  i8253: Consolidate all kernel definitions of i8253_lock
  i8253: Unify all kernel declarations of i8253_lock
  i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-22 16:51:56 -07:00
Linus Torvalds bdc7ccfc06 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  sched: Cleanup duplicate local variable in [enqueue|dequeue]_task_fair
  sched: Replace use of entity_key()
  sched: Separate group-scheduling code more clearly
  sched: Reorder root_domain to remove 64 bit alignment padding
  sched: Do not attempt to destroy uninitialized rt_bandwidth
  sched: Remove unused function cpu_cfs_rq()
  sched: Fix (harmless) typo 'CONFG_FAIR_GROUP_SCHED'
  sched, cgroup: Optimize load_balance_fair()
  sched: Don't update shares twice on on_rq parent
  sched: update correct entity's runtime in check_preempt_wakeup()
  xtensa: Use generic config PREEMPT definition
  h8300: Use generic config PREEMPT definition
  m32r: Use generic PREEMPT config
  sched: Skip autogroup when looking for all rt sched groups
  sched: Simplify mutex_spin_on_owner()
  sched: Remove rcu_read_lock() from wake_affine()
  sched: Generalize sleep inside spinlock detection
  sched: Make sleeping inside spinlock detection working in !CONFIG_PREEMPT
  sched: Isolate preempt counting in its own config option
  sched: Remove pointless in_atomic() definition check
  ...
2011-07-22 16:45:02 -07:00
Linus Torvalds 4d4abdcb1d Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (123 commits)
  perf: Remove the nmi parameter from the oprofile_perf backend
  x86, perf: Make copy_from_user_nmi() a library function
  perf: Remove perf_event_attr::type check
  x86, perf: P4 PMU - Fix typos in comments and style cleanup
  perf tools: Make test use the preset debugfs path
  perf tools: Add automated tests for events parsing
  perf tools: De-opt the parse_events function
  perf script: Fix display of IP address for non-callchain path
  perf tools: Fix endian conversion reading event attr from file header
  perf tools: Add missing 'node' alias to the hw_cache[] array
  perf probe: Support adding probes on offline kernel modules
  perf probe: Add probed module in front of function
  perf probe: Introduce debuginfo to encapsulate dwarf information
  perf-probe: Move dwarf library routines to dwarf-aux.{c, h}
  perf probe: Remove redundant dwarf functions
  perf probe: Move strtailcmp to string.c
  perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_END
  tracing/kprobe: Update symbol reference when loading module
  tracing/kprobes: Support module init function probing
  kprobes: Return -ENOENT if probe point doesn't exist
  ...
2011-07-22 16:44:39 -07:00
Linus Torvalds 0342cbcfce Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix wrong check in list_splice_init_rcu()
  net,rcu: Convert call_rcu(xt_rateest_free_rcu) to kfree_rcu()
  sysctl,rcu: Convert call_rcu(free_head) to kfree
  vmalloc,rcu: Convert call_rcu(rcu_free_vb) to kfree_rcu()
  vmalloc,rcu: Convert call_rcu(rcu_free_va) to kfree_rcu()
  ipc,rcu: Convert call_rcu(ipc_immediate_free) to kfree_rcu()
  ipc,rcu: Convert call_rcu(free_un) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netport_free) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netnode_free) to kfree_rcu()
  ia64,rcu: Convert call_rcu(sn_irq_info_free) to kfree_rcu()
  block,rcu: Convert call_rcu(disk_free_ptbl_rcu_cb) to kfree_rcu()
  scsi,rcu: Convert call_rcu(fc_rport_free_rcu) to kfree_rcu()
  audit_tree,rcu: Convert call_rcu(__put_tree) to kfree_rcu()
  security,rcu: Convert call_rcu(whitelist_item_free) to kfree_rcu()
  md,rcu: Convert call_rcu(free_conf) to kfree_rcu()
2011-07-22 16:44:08 -07:00
Linus Torvalds 6d16d6d9bb Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n
  iommu/amd: Don't use MSI address range for DMA addresses
  iommu/amd: Move missing parts to drivers/iommu
  iommu: Move iommu Kconfig entries to submenu
  x86/ia64: intel-iommu: move to drivers/iommu/
  x86: amd_iommu: move to drivers/iommu/
  msm: iommu: move to drivers/iommu/
  drivers: iommu: move to a dedicated folder
  x86/amd-iommu: Store device alias as dev_data pointer
  x86/amd-iommu: Search for existind dev_data before allocting a new one
  x86/amd-iommu: Allow dev_data->alias to be NULL
  x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions
  x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines
  x86/amd-iommu: Store ATS state in dev_data
  x86/amd-iommu: Store devid in dev_data
  x86/amd-iommu: Introduce global dev_data_list
  x86/amd-iommu: Remove redundant device_flush_dte() calls
  iommu-api: Add missing header file

Fix up trivial conflicts (independent additions close to each other) in
drivers/Makefile and include/linux/pci.h
2011-07-22 16:39:42 -07:00
Linus Torvalds 431bf99d26 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits)
  PM: Improve error code of pm_notifier_call_chain()
  PM: Add "RTC" to PM trace time stamps to avoid confusion
  PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
  PM / Suspend: Add .suspend_again() callback to suspend_ops
  PM / OPP: Introduce function to free cpufreq table
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  ...
2011-07-22 16:01:57 -07:00
Russell King 3ad55155b2 Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/kernel/entry-armv.S
2011-07-22 23:09:07 +01:00
Russell King 06f365acef Merge branches 'btc', 'dma', 'entry', 'fixes', 'linker-layout', 'misc', 'mmci', 'suspend' and 'vfp' into for-next 2011-07-22 23:08:48 +01:00
Linus Torvalds 17413f5acd Merge branch 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Fixup __this_cpu_xchg* operations
2011-07-22 15:07:35 -07:00
Linus Torvalds 8209f53d79 Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...
2011-07-22 15:06:50 -07:00
Linus Torvalds acb41c0f92 Merge branch 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  pci/of: Consolidate pci_bus_to_OF_node()
  pci/of: Consolidate pci_device_to_OF_node()
  x86/devicetree: Use generic PCI <-> OF matching
  microblaze/pci: Move the remains of pci_32.c to pci-common.c
  microblaze/pci: Remove powermac originated cruft
  pci/of: Match PCI devices to OF nodes dynamically
2011-07-22 14:54:02 -07:00
Linus Torvalds 7235dd74a4 Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/imx: add device tree probe support
  spi/imx: copy gpio number passed by platform data into driver private data
  spi/imx: use soc name in spi device type naming scheme
  spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4
  spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro
  spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro
  spi/imx: do not make copy of spi_imx_devtype_data
  spi/dw: Add spi number into spi irq desc
  spi/tegra: Use engineering names in DT compatible property
  spi/fsl_spi: fix CPM spi driver
  mach-s3c2410: remove unused spi-gpio.h file
  spi: remove obsolete spi-s3c24xx-gpio driver
  mach-gta2: remove unused spi-gpio.h include
  mach-qt2410: convert to spi_gpio
  mach-jive: convert to spi_gpio
  spi/pxa2xx: Remove unavailable ssp_type from documentation
  spi/bfin_spi: uninline fat queue funcs
  spi/bfin_spi: constify pin array
  spi/bfin_spi: use structs for accessing hardware regs
  spi/topcliff-pch: Support new device ML7223 IOH
  ...

Fix up trivial conflict in arch/arm/mach-ep93xx/Makefile
2011-07-22 14:52:44 -07:00
Linus Torvalds c7c8518498 Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits)
  gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
  mcp23s08: add i2c support
  mcp23s08: isolate spi specific parts
  mcp23s08: get rid of setup/teardown callbacks
  gpio/tegra: dt: add binding for gpio polarity
  mcp23s08: remove unused work queue
  gpio/da9052: remove a redundant assignment for gpio->da9052
  gpio/mxc: add device tree probe support
  ARM: mxc: use ARCH_NR_GPIOS to define gpio number
  gpio/mxc: get rid of the uses of cpu_is_mx()
  gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
  gpio: Move mpc5200 gpio driver to drivers/gpio
  GPIO: DA9052 GPIO module v3
  gpio/tegra: Use engineering names in DT compatible property
  of/gpio: Add new method for getting gpios under different property names
  gpio/dt: Refine GPIO device tree binding
  gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
  gpio/pca953x: Deprecate meaningless device-tree bindings
  gpio/pca953x: Remove dynamic platform data pointer
  gpio/pca953x: Fix IRQ support.
  ...
2011-07-22 14:50:57 -07:00
Linus Torvalds 951cc93a74 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1287 commits)
  icmp: Fix regression in nexthop resolution during replies.
  net: Fix ppc64 BPF JIT dependencies.
  acenic: include NET_SKB_PAD headroom to incoming skbs
  ixgbe: convert to ndo_fix_features
  ixgbe: only enable WoL for magic packet by default
  ixgbe: remove ifdef check for non-existent define
  ixgbe: Pass staterr instead of re-reading status and error bits from descriptor
  ixgbe: Move interrupt related values out of ring and into q_vector
  ixgbe: add structure for containing RX/TX rings to q_vector
  ixgbe: inline the ixgbe_maybe_stop_tx function
  ixgbe: Update ATR to use recorded TX queues instead of CPU for routing
  igb: Fix for DH89xxCC near end loopback test
  e1000: always call e1000_check_for_link() on e1000_ce4100 MACs.
  netxen: add fw version compatibility check
  be2net: request native mode each time the card is reset
  ipv4: Constrain UFO fragment sizes to multiples of 8 bytes
  virtio_net: Fix panic in virtnet_remove
  ipv6: make fragment identifications less predictable
  ipv6: unshare inetpeers
  can: make function can_get_bittiming static
  ...
2011-07-22 14:43:13 -07:00
Richard Weinberger a03fc8c375 um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM
rwsem.S can only be used with CONFIG_RWSEM_XCHGADD_ALGORITHM.
This unbreaks the UML build on i386.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: JBeulich@novell.com
Link: http://lkml.kernel.org/r/201107222055.35341.richard@nod.at
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-22 23:06:30 +02:00
Linus Torvalds a7e1aabb28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: Fix in/out emulation
  lguest: Fix translation count about wikipedia's cpuid page
  lguest: Fix three simple typos in comments
  lguest: update comments
  lguest: Simplify device initialization.
  lguest: don't rewrite vmcall instructions
  lguest: remove remaining vmcall
  lguest: use a special 1:1 linear pagetable mode until first switch.
  lguest: Do not exit on non-fatal errors
2011-07-22 13:45:50 -07:00
Linus Torvalds 111ad119d1 Merge branch 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.
  xen: tmem: self-ballooning and frontswap-selfshrinking
  xen: Add module alias to autoload backend drivers
  xen: Populate xenbus device attributes
  xen: Add __attribute__((format(printf... where appropriate
  xen: prepare tmem shim to handle frontswap
  xen: allow enable use of VGA console on dom0
2011-07-22 13:45:15 -07:00
Linus Torvalds 997271cf5e Merge branch 'stable/pci.cleanups.v1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/pci.cleanups.v1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.
  xen/pci: Remove 'xen_allocate_pirq_gsi'.
  xen/pci: Retire unnecessary #ifdef CONFIG_ACPI
  xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the end
  xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.
  xen/pci: Use the xen_register_pirq for HVM and initial domain users
  xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.
  xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.
  xen/pci: Update comments and fix empty spaces.
  xen/pci: Shuffle code around.
2011-07-22 13:44:53 -07:00
Linus Torvalds 896d01796d Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen:pvhvm: Modpost section mismatch fix
2011-07-22 13:44:45 -07:00
Linus Torvalds 0df55ea55b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (78 commits)
  mmc: MAINTAINERS: add myself as a tmio-mmc maintainer
  mmc: print debug messages for runtime PM actions
  mmc: fix runtime PM with -ENOSYS suspend case
  mmc: at91_mci: move register header from include/ to drivers/
  mmc: mxs-mmc: fix clock rate setting
  mmc: tmio: fix a deadlock
  mmc: tmio: fix a recently introduced bug in DMA code
  mmc: sh_mmcif: maximize power saving
  mmc: tmio: maximize power saving
  mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()
  mmc: omap_hsmmc: refactor duplicated code
  mmc: omap_hsmmc: fix a few bugs when setting the clock divisor
  mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  mmc: omap_hsmmc: move hardcoded frequency constants to defines
  mmc: omap_hsmmc: correct debug report error status mnemonics
  mmc: block: fixed NULL pointer dereference
  mmc: documentation of mmc non-blocking request usage and design.
  ...
2011-07-22 13:44:18 -07:00
Jonas Bonn 616257669e OpenRISC: Miscellaneous
Adds README file, TODO list, and a couple of other pieces that didn't seem
to fit into any other patch.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:41 +02:00
Jonas Bonn 224cd129fd OpenRISC: Library routines
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:40 +02:00
Jonas Bonn 58e0166a47 OpenRISC: Headers
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:39 +02:00
Jonas Bonn 769a8a9622 OpenRISC: Traps
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:38 +02:00
Jonas Bonn 5a2bbb8f64 OpenRISC: Module support
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:37 +02:00
Jonas Bonn e480158cc8 OpenRISC: GPIO
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:37 +02:00
Jonas Bonn 88ef7f3f13 OpenRISC: Scheduling/Process management
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:36 +02:00
Jonas Bonn 2a7be1160a OpenRISC: Idle/Power management
Minimal functionality...

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:35 +02:00
Jonas Bonn 09abb90107 OpenRISC: System calls
The OpenRISC Linux kernel conforms to the "generic" syscall interface which
contains only the reduced set of syscalls deemed necessary for new
architectures.  Unfortunately, the uClibc port for OpenRISC does not fully
support this reduced set; as such, an additional patch available out-of-tree
needs to be applied to the kernel in order to use the current uClibc.  This
is just a temporary measure until the libc port can be straightened out; it
is likely that OpenRISC will make the transition to glibc shortly where the
generic syscall interface is better supported.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:34 +02:00
Jonas Bonn 816ebaa8b6 OpenRISC: IRQ
This patch adds support for the OpenRISC PIC.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: tglx@linutronix.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:33 +02:00
Jonas Bonn b731fbbd24 OpenRISC: Timekeeping
Implements support for the OpenRISC timer which is a 28 bit cycle counter
that can be read out of a special purpose register.  This counter is
used as a both a clock event and clocksource device.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: tglx@linutronix.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:32 +02:00
Jonas Bonn a39af6f7b8 OpenRISC: DMA
Simple DMA implementation.  Allows for allocation of coherent memory
(simply uncached) for DMA operations.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:32 +02:00
Jonas Bonn e5ad95ce9b OpenRISC: PTrace
This patch implements minimal PTrace support.  The pt_regs structure is
not exported to userspace for OpenRISC; rather, the GETREGSET mechanism
is intended to be used and the registers, as such, exported in the core
dump format which is ABI stable.  This is in line with what is intended
for new architectures as of 2.6.34 and has the advantage of permitting
the layout of the registers on the kernel stack (as per pt_regs) to be
freely modified.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:31 +02:00
Jonas Bonn f8c4a270d9 OpenRISC: Build infrastructure
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:30 +02:00
Jonas Bonn ac689eb7f9 OpenRISC: Signal handling
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:29 +02:00
Jonas Bonn 61e85e3675 OpenRISC: Memory management
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:28 +02:00
Jonas Bonn 4f246ba30e OpenRISC: Device tree
The OpenRISC architecture uses the device tree infrastructure for the
platform description.  This is currently limited to having a device tree
built into the kernel, but work is underway within the OpenRISC project
to define how this device tree blob should be passed into the kernel from
an external resource.

Patch contains a single example DTS file to go with the defconfig for
or1ksim.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: devicetree-discuss@lists.ozlabs.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:28 +02:00
Jonas Bonn 9d02a4283e OpenRISC: Boot code
Architecture code and early setup routines for booting Linux.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:27 +02:00
Jonas Bonn a4e05276a1 asm-generic: move archictures to common delay.h
This patch moves the in-tree architectures that were using the 'generic'
delay.h over to using the header file in asm-generic.

This is not done using the generic-y mechanism as none of these arch's
have started using that mechanism yet.  This is a trivial change to make
later when the arch begins using generic-y.

Note the subtle change to the avr32 and SH architectures where the argument
to __const_udelay was previously using the rounded down constant value
instead of the rounded up value.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2011-07-22 18:46:24 +02:00
Mikael Pettersson e7d59db91a ARM: 7004/1: fix traps.h compile warnings
Building kernel 3.0 for an n2100 (plat-iop) results in:

In file included from arch/arm/plat-iop/cp6.c:20:
/tmp/linux-3.0/arch/arm/include/asm/traps.h:12: warning: 'struct pt_regs' declared inside parameter list
/tmp/linux-3.0/arch/arm/include/asm/traps.h:12: warning: its scope is only this definition or declaration, which is probably not what you want
/tmp/linux-3.0/arch/arm/include/asm/traps.h:48: warning: 'struct pt_regs' declared inside parameter list
/tmp/linux-3.0/arch/arm/include/asm/traps.h:48: warning: 'struct task_struct' declared inside parameter list
arch/arm/plat-iop/cp6.c:45: warning: initialization from incompatible pointer type

Nothing here depends on the layout of pt_regs or task_struct, so this
can be fixed by adding forward struct declarations to asm/traps.h.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-22 17:19:02 +01:00
Narendra_K@Dell.com 9b373ed18f x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems
Commit 6e8af08dfa enables pci=bfsort on
future Dell systems. But the identification string 'Dell System' matches
on already existing whitelist, which do not have SMBIOS type 0xB1,
causing pci=bfsort not being set on existing whitelist.

This patch fixes the regression by moving the type 0xB1 check beyond the
existing whitelist so that existing whitelist is walked before.

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:44:28 -07:00
tip-bot for Sergei Shtylyov a8c7ef3187 x86/PCI: quirks: Use pci_dev->revision
This code uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so
it wasn't converted by commit 44c10138fd ("PCI: Change all
drivers to use pci_device->revision") before being moved to arch/x86/...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/201107111901.39281.sshtylyov@ru.mvista.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:41:39 -07:00
Ralf Baechle d5341942d7 PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.
Aside of the usual motivation for constification,  this function has a
history of being abused a hook for interrupt and other fixups so I turned
this function const ages ago in the MIPS code but it should be done
treewide.

Due to function pointer passing in varous places a few other functions
had to be constified as well.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To: Anton Vorontsov <avorontsov@mvista.com>
To: Chris Metcalf <cmetcalf@tilera.com>
To: Colin Cross <ccross@android.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
To: Eric Miao <eric.y.miao@gmail.com>
To: Erik Gilling <konkers@android.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
To: "H. Peter Anvin" <hpa@zytor.com>
To: Imre Kaloz <kaloz@openwrt.org>
To: Ingo Molnar <mingo@redhat.com>
To: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Krzysztof Halasa <khc@pm.waw.pl>
To: Lennert Buytenhek <kernel@wantstofly.org>
To: Matt Turner <mattst88@gmail.com>
To: Nicolas Pitre <nico@fluxnic.net>
To: Olof Johansson <olof@lixom.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
To: Richard Henderson <rth@twiddle.net>
To: Russell King <linux@arm.linux.org.uk>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:26:06 -07:00
Jan Beulich db34a363b9 x86/PCI: config space accessor functions should not ignore the segment argument
Without this change, the majority of the raw PCI config space access
functions silently ignore a non-zero segment argument, which is
certainly wrong.

Apart from pci_direct_conf1, all other non-MMCFG access methods get
used only for non-extended accesses (i.e. assigned to raw_pci_ops
only). Consequently, with the way raw_pci_{read,write}() work, it would
be a coding error to call these functions with a non-zero segment (with
the current call flow this cannot happen afaict).

The access method 1 accessor, as it can be used for extended accesses
(on AMD systems) instead gets checks added for the passed in segment to
be zero. This would be the case when on such a system having multiple
PCI segments (don't know whether any exist in practice) MMCFG for some
reason is not usable, and method 1 gets selected for doing extended
accesses. Rather than accessing the wrong device's config space, the
function will now error out.

v2: Convert BUG_ON() to WARN_ON(), and extend description as per Ingo's
request.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:25:41 -07:00
Bjorn Helgaas 43d786ed4d x86/PCI: reduce severity of host bridge window conflict warnings
Host bridge windows are top-level resources, so if we find a host bridge
window conflict, it's probably with a hard-coded legacy reservation.
Moving host bridge windows is theoretically possible, but we don't support
it; we just ignore windows with conflicts, and it's not worth making this
a user-visible error.

Reported-and-tested-by: Jools Wills <jools@oxfordinspire.co.uk>
References: https://bugzilla.kernel.org/show_bug.cgi?id=38522
Reported-by: Das <dasfox@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=16497
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:25:39 -07:00
Shaohua Li 0aba496fc8 x86/PCI: select direct access mode for mmconfig option
Direct access is needed in mmconf mode too. There are two reasons:
1. we need it to access first 256 bytes. We have bug before that
   using mmconf to access pci config space hangs system (when
   resizing BARs), so we use type1 config for legacy config space.
2. when doing mmconfg bar checking, we need access ACPI _CRS,
   which might access PCI config space.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 08:25:36 -07:00
Thomas Gleixner ded7c1ee97 mips: Fix i8253 clockevent fallout
pit_clockevent wants to replaced in the argument of the callback
function as well.

Reported-by; Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-07-22 11:18:22 +02:00
Heechul Yun 4cde7e0dca ARM: 6998/2: kernel: use proper memory barriers for bitops
Improve scalability by avoiding costly and unnecessary L2 cache sync
in handling bitops.

Signed-off-by: Heechul Yun <hyun@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-22 10:16:27 +01:00
Petr Štetiar 24daa15aab ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
I've got hands on one ts-7300 board, which is equiped with 128MB RAM in two
64MB memory chips, so it's 16 banks/8MB each. Without this patch, the bootmem
init code complains about small NR_BANKS number and only lower 64MB is
accessible.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-22 10:16:27 +01:00
Fabio Baltieri a63e23b932 powerpc/85xx: fix mpic configuration in CAMP mode
Change the string to check for CAMP mode boot on MPC85xx (eg. P2020) to match
the one in the corresponding dts files (p2020rdb_camp_core{0,1}.dts).

Without this fix the mpic is configured as in the SMP boot mode, which causes
the first core to report a protected source interrupt error for devices
of the other core and lock up.

Also add MPIC_SINGLE_DEST_CPU on both P2020 based architectures in CAMP
mode as suggested by Scott Wood. Thanks.

Cc: Scott Wood <scottwood@freescale.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22 03:28:29 -05:00
David S. Miller 368940d0a8 net: Fix ppc64 BPF JIT dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 23:26:13 -07:00
Adrian Knoth 8d431f4160 lguest: Fix translation count about wikipedia's cpuid page
The comment is outdated, wikipedia now has six translations of the cpuid
page.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22 14:39:50 +09:30
Adrian Knoth 64be11583b lguest: Fix three simple typos in comments
This patch fixes three typos I've accidentally spotted.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (one was already fixed)
2011-07-22 14:39:50 +09:30