mirror of https://gitee.com/openkylin/linux.git
1377 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
cf9b0772f2 |
ARM: SoC driver updates for v4.15
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
|
|
|
Linus Torvalds
|
527d147074 |
ARM: Device-tree updates for 4.15
We add device tree files for a couple of additional SoCs in various areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking,
Amlogic A113D for audio, and Renesas R-Car V3M for automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic
and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues that
the latest version of 'dtc' now warns about. Unfortunately there is still
a lot left to do.
A rework of the ARM foundation model introduced several new files
for common variations of the model.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TnSo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"We add device tree files for a couple of additional SoCs in various
areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
networking, Amlogic A113D for audio, and Renesas R-Car V3M for
automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
Amlogic and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues
that the latest version of 'dtc' now warns about. Unfortunately there
is still a lot left to do.
A rework of the ARM foundation model introduced several new files for
common variations of the model"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
dt-bindings: bus: Add documentation for the Technologic Systems NBUS
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
...
|
|
|
Linus Torvalds
|
8c60969856 |
ARM: SoC platform updates for 4.15
Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are
OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now
with a Quad-Core ARM Cortex-A7. According to the manufacturer,
it is intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
of chips meant for managed gigabit ethernet switches, based
around a Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2
and Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jlJ2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are OMAP,
Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now with a
Quad-Core ARM Cortex-A7. According to the manufacturer, it is
intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
chips meant for managed gigabit ethernet switches, based around a
Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
ARM: meson: Add SMP bringup code for Meson8 and Meson8b
ARM: smp_scu: allow the platform code to read the SCU CPU status
ARM: smp_scu: add a helper for powering on a specific CPU
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: defconfig: select the right SX150X driver
arm64: defconfig: Enable QCOM_IOMMU
arm64: Add ThunderX drivers to defconfig
arm64: defconfig: Enable Tegra PCI controller
cpufreq: imx6q: Move speed grading check to cpufreq driver
arm64: defconfig: re-enable Qualcomm DB410c USB
ARM: configs: stm32: Add MDMA support in STM32 defconfig
ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
...
|
|
|
Linus Torvalds
|
c9b012e5f4 |
arm64 updates for 4.15
Plenty of acronym soup here:
- Initial support for the Scalable Vector Extension (SVE)
- Improved handling for SError interrupts (required to handle RAS events)
- Enable GCC support for 128-bit integer types
- Remove kernel text addresses from backtraces and register dumps
- Use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- Perf PMU driver for the Statistical Profiling Extension (SPE)
- Perf PMU driver for Hisilicon's system PMUs
- Misc cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJaCcLqAAoJELescNyEwWM0JREH/2FbmD/khGzEtP8LW+o9D8iV
TBM02uWQxS1bbO1pV2vb+512YQO+iWfeQwJH9Jv2FZcrMvFv7uGRnYgAnJuXNGrl
W+LL6OhN22A24LSawC437RU3Xe7GqrtONIY/yLeJBPablfcDGzPK1eHRA0pUzcyX
VlyDruSHWX44VGBPV6JRd3x0vxpV8syeKOjbRvopRfn3Nwkbd76V3YSfEgwoTG5W
ET1sOnXLmHHdeifn/l1Am5FX1FYstpcd7usUTJ4Oto8y7e09tw3bGJCD0aMJ3vow
v1pCUWohEw7fHqoPc9rTrc1QEnkdML4vjJvMPUzwyTfPrN+7uEuMIEeJierW+qE=
=0qrg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
|
|
|
Marco Franchi
|
48c926cd34 |
dt-bindings: Remove leading zeros from bindings notation
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Arnd Bergmann
|
2d2cf5283f |
Realtek ARM64 based SoC DT for v4.15
This refactors the RTD1295 DT, preparing for (but not yet adding) RTD1293 and RTD1296. Superfluous reg property entries are dropped. DTs for PROBOX2 AVA and MeLE V9 TV boxes are added. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZ/aV5AAoJEPou0S0+fgE/NoMQALWahjJ7zU5xB5mrdW1L2qfz Nb1K7dY9PJyVvwReY50U8OLJ0UOkQsmzQ2zK6aKqiiGSfeOjVknwJTbZZZ8/tKY2 0kkkN2TWX5aTodSm0S0NZkfY/+Me6ttlRabdEP06VE3BdyBY5FjThgYGZcXtArQB BMgKyh3ge/imn7AOLbPoi0ByExRfAX80TCHjOIFLXt3zx5OYpHU5XVrepT/Vej/J G+1OXsypgOJRByA8vuKlg1k9dKDLIScHoqyKZwiORJ6JVlXjb/AxO5ThzKR/WK0L 4zAtfkZWZxom5nmUtpiLOnYLVm9SViEa9ncU0HoyMLFwsxrxtkZvKNdsARllAER0 dJO1agWHUn1otdb9egJPB07h/LUsgJWYGxeq5LKpq+MUqpPa1QBhkHVz4F63obni D6VQm3PthxCW/jRD0fj0HVMVKieJO5oUtGTlHLnShjsGCzA73VI9jqDxkO3HFRot bvoPAHLtRXCF+0LQ5OYrNN5yG8aDN68EgltmgZp+nF8dXahaHmn8KKeh1GOHAfXX 8v9h52FxWcU2QWgOvIoORK3ohKey5V6L/fy6++rAwnTTQ6pV2RW2L2xRin5poXBM 5hpolazCpragl0kKCOakZ/WHcUIP61pixGMPz362ipFZw8nTNZW3DcQ7AgFtenH6 TcG1dWHJhWo47Mwk50tP =8sRS -----END PGP SIGNATURE----- Merge tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into next/dt Pull "Realtek ARM64 based SoC DT for v4.15" from Andreas Färber: This refactors the RTD1295 DT, preparing for (but not yet adding) RTD1293 and RTD1296. Superfluous reg property entries are dropped. DTs for PROBOX2 AVA and MeLE V9 TV boxes are added. * tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: dts: realtek: Add MeLE V9 dt-bindings: arm: realtek: Document MeLE V9 dt-bindings: Add vendor prefix for MeLE arm64: dts: realtek: Factor out common RTD129x parts arm64: dts: realtek: Add ProBox2 Ava dt-bindings: arm: realtek: Add ProBox2 AVA dt-bindings: Add vendor prefix for ProBox2 arm64: dts: realtek: Clean up RTD1295 UART reg property |
|
|
Arnd Bergmann
|
b4eebd88c2 |
Actions Semi ARM based SoC DT for v4.15
This updates the Guitar board DT with a clock node for the debug UART and adds a new DT for the CubieBoard6. It also updates the S500 DT with CPU power domains. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZ/ZWMAAoJEPou0S0+fgE/fHcQAIdbR8x3BqQ208lnaCAPHGDT jAkpW1FrnuxO+94r1eKMqOQjZ9Eh5t4qq1MmWSXQaNn7UGaLkYBKIb7T6A+O2H3X /cNgjU58DWqOgkp3M6TGbRK1WAlEncQWSGCiVAPwqe+dJvvi7PXnxSBz0zCdh2z6 y01TrmswsapjnOBhfaXJmMvTg1yDEaC7uo3tNNo+9fLRs3kvRv8MeONgQ08/JFOc jLR5WL6Abs+sl/YWMOljFG4M/koUKz/xgPaA0IiQTtd2+sLfkEWivjWNmyDxqm09 k04bCW+w4ZBV8P7OYH7fpeQ0f77jILQl/v/3VdSAQ3+gB2jSCLWgHUKzgvg1r/Qr XafaTPQbKySRUimufOlIMzEJVo/tz3oXahkvcDVw6q0CYFC7R0ohLHKCho2uon7l ZiDgGsVwJ/PY0luXf32oIV5EvcMBzgj6MQzqk1f1L6v9g/ZGc+0G/cC0VERcwqRX tZZrnHiVRD7ICRwAeV6hKmyUhb6wD+KhC92U20O1qQwcsD7mwdDIXjPqAQedva6D B/tAIZIBfATlfANNfs6Wk4YXS1S5fbGU3oM5aLFnvvadBDOgxbQYjkpBD03ST+Lf Nji2F/YpAGfBnHvZDOcoGl3yJ4sPbsTVDmgkjUZT37nLKYnnBqAqBgb1cXlq7eoP djOJEUb5X202cCWRnP8c =Bu/n -----END PGP SIGNATURE----- Merge tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM based SoC DT for v4.15" from Andreas Färber: This updates the Guitar board DT with a clock node for the debug UART and adds a new DT for the CubieBoard6. It also updates the S500 DT with CPU power domains. * tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 |
|
|
Andreas Färber
|
fa687604fa |
dt-bindings: arm: actions: Add CubieBoard6
Define a compatible string for Cubietech CubieBoard6. Cc: support@cubietech.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Arnd Bergmann
|
a5494aed0d |
Amlogic 64-bit platforms: DT updates for v4.15
- new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlnsbzwACgkQWTcYmtP7 xmWwSw/+LBr7iNv9ugxgfShcd8ugecjJm7eBMD9zKMJaHw+1AUxhexZsCyUQVjDy UjAeTTMsugTzIEvQoSI97h82K3uE7/3zqU+UaWziWILegb8b9VnYVzjHUoodNE9Z /9gbIb7P55rlJ1BN0zzXcsvEjvC7TrfklgXBfIBK0Ob2zqDHGpiWOFnrQiuZNweA tgSemkT4ELZYAksXszFhU1o87QW5IRqXwNX5ech7p3UpUTdDnY1MPNbLRRh9tVWi G7EtLJfbSPEHczBBtfcxQkagpk2TjVStMpYgrAaa3eMG5Ervdh3QrdGp8B7bObPY rZgYAU1x7q3PBWm07IpnlnprMC3RHP7wdirXVKMNW1DbYqRBoyGeTc9pF+DgiMNP wcxsbQgotSZbeke6ODPaP2xEtIqWCgTee/4P6zjOYfsXxphtVkdfLGvICwpximUj CqbXZSsn+pg4g1IsGU3EcVLbFzq2A+uv5hkV18b9ouDIN0mm7+/mpyaLeQ8wrl2U 5f+dCbrU4ypYosnOQIZKla8kHwutWmur6a9+VBPSEVWMXzdUUmBUicxgUYi5DMLZ SLXBklAZ74YqnFNZvrNaLvaD2GR5COU8NpW9S3PBxsUqXa57jMUAAOzbeLLvRB87 57S3pR7f+thG93pe8JFfP/ciVcnAGn9oQkV5LU8k6lTd7gaxtEw= =bJwM -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc |
|
|
Arnd Bergmann
|
2132910ec9 |
Amlogkc 32-bit platforms: DT updates for v4.15
- add SDIO MMC controller - reserved memory fixes - SoC info driver nodes - enable USB host contnroller -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlnsbnIACgkQWTcYmtP7 xmW62xAAn9uJeEnSAmJlscNEs0FbhtPyPFjiRaynzKlC9EWHL6VnONWppucS8jNN jKuWphFlGpBMKiPHXn7OrHEBlsblPQeUeV2iyrCtbDha/XwfJeZbIFuIhOpdI6b4 /16i6+4PNtvx+sfQ4HwIQbybOztyVb0ZblZEo32C0cGmw6LYcj/+mAo7wteQDnt+ dOy20CjjlkzrzPHM0vnu08n2WAIilik95QtFkZDsW/vrFS+6xp8VkHIHsUaTkZTD HGra8O/p/oifkYqaQQKYIj4iQRw1tiHx7kV1Q5+f6RD6Kgxo1XVhPVkoOcgT0T48 zpKTh04NhG7pXmT3LQd6TOIbWHY0zxgkn2ndJjcA700OK3tfPW4cuKCsNNLgwT80 V7tbgGSz4RWkohQA+Eag8oioO9B/fZhdK/tCeow15BaKvfnxViuHl9pOApxOr1tV n+UkxBWVayNvwHdNrhEmK5oDMkgvOPmlKF6FqwDIP0lF3jxDyVxRUGh8njQ8JM5g lC5xLnXD9cNkC0s0z7J6mcv6dqKMPoQNHTFH+pXrxVA9F2eY+Rp6unrjZCCnDm1h OuAp5iC9fWjwaVs6Xr56uOXF+GFsUMG/guW4xeNAVFIuQ5WVoLrpq8a50poIST5v oevaebm2rXoIOc9GB/KpO8EmdQ4lgg6JxgbwP+S68jRo2ybRC2M= =TG/7 -----END PGP SIGNATURE----- Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit platforms: DT updates for v4.15" - add SDIO MMC controller - reserved memory fixes - SoC info driver nodes - enable USB host controller * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the SDIO MMC controller ARM: dts: meson8b: add reserved memory zone to fix silent freezes ARM: dts: meson: add SoC information nodes dt-bindings: Amlogic: add documentation for the SoC info register areas ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board |
|
|
Arnd Bergmann
|
877b203e15 |
This pull request contains Broadcom ARM-based Device Tree changes for 4.15,
please pull the following: - Eric adds support for the CLCD and PWM controller on Cygnus chis - Loic fixes the console path on the Raspberry Pi 3 (already submitted as fixes) and then proceeds with enabling the BCM43438 bluetooth chip on the Raspberry Pi 3 - Rafal specifies the USB ports on the Luxul XWR-1200 - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810 and XAP-1440 both based on BCM53573 - Florian adds support for the Broadcom Hurricane 2 SoC by adding general machine binding, clock binding, SoC DTS include file and a DTS for the Ubiquiti Networks UniFi Switch 8 -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZ6oyXAAoJEIfQlpxEBwcEZ9sQAIHxupdwbECNH1DJo0jWxqrC bMAfx2yHyr/snPXq46E91QjRIGJLk/E2lMUS0xYWpxC2MRp0pZPFAVTc3qYKgI/9 dGOuJNsk1ZUhbys1BhgVuryYbc6ZSfxz8h5uUxdZ5CLxs9beAsaKDXablsN8Th3O j5OEundSosZ1SPd+F9KNDURjRmfeUzhYlBuRZ2AfWvSJFYjn2cIDM9aCBnDSNYHh Pxs03CF4uGM6DBReIcuG99NKtlaTFoD4v7Empb5i4F0sUNCefcGvhXeMDUBGPeRo z0BDJ4LEBySDzTRd9NhekPC4DM7QsyTjGJz1JbW8FmsK+GnJx5uLMrEgXUtWbSou bup1RHRaxAcpoTv0BTiPK0chfU63RgAqrvDw7wo8O17d06BHtyt0Z5tlv3Oc7OBP 4XhkSj6TmkD6WtQCQWY81jMZ6ezzxeZ/5kOIASAvKc1bh3ocbxpdQkNoxd0pASsI o/CW14a0q0STEdYnF+Y6YGQziuAhRQH/8W6mBUeRfPxQQrG8NXPJoGArP9be1ikR 7mqUivV3pD1mA+3PiiD2fZ57hQRjTowr4bA+RarYxxg7TDu3kUFqkXm93aYXuBbm UzyAZZ4LLbhlcIXIuwfoigoSmQaqUbEIMOqSW8v74PKJDOcSqBS+iZDD+hDSpbPA XShAuXKwt3p6uSei3nib =DmZ2 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.15" from Florian Fainelli: This pull request contains Broadcom ARM-based Device Tree changes for 4.15, please pull the following: - Eric adds support for the CLCD and PWM controller on Cygnus chis - Loic fixes the console path on the Raspberry Pi 3 (already submitted as fixes) and then proceeds with enabling the BCM43438 bluetooth chip on the Raspberry Pi 3 - Rafal specifies the USB ports on the Luxul XWR-1200 - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810 and XAP-1440 both based on BCM53573 - Florian adds support for the Broadcom Hurricane 2 SoC by adding general machine binding, clock binding, SoC DTS include file and a DTS for the Ubiquiti Networks UniFi Switch 8 * tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 dt-bindings: Add Ubiquiti Networks vendor prefix ARM: dts: Add Broadcom Hurricane 2 DTS include file dt-bindings: Document Broadcom Hurricane 2 clocks dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs ARM: dts: BCM53573: Add DT for Luxul XAP-1440 ARM: dts: BCM53573: Add DT for Luxul XAP-810 ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200 ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave ARM: dts: bcm283x: Fix console path on RPi3 ARM: dts: cygnus: Add the PWM node ARM: dts: cygnus: Add the CLCD controller |
|
|
Arnd Bergmann
|
682e3efa4d |
Amlogic SoC updates for v4.15
- add SMP support to Meson8/8b -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAln2AfgACgkQWTcYmtP7 xmXP+A//U3cBORd3lkmaVxGzcul/IB0czVH1XJp+WgMi2ksuin3UjveANFFxIUtL cqBBNV23+PDjgFZF+SAbuEMIyWKoxvuxJ6ktKoP3N9MQsyb2yM9t2ITDfGCcHQ/E xu5vjuYDqfjpowLcDE2yFTZbDV980gc7QyJvhwX9Bcxod+KfXz7C60J57qxRar0C F5ViskncTvka3NlQGcCvZz0Wd1J5rMcBncmWpqQPKTyKg22gqbYgISHOWay6h6G4 otNhcnN4FeVgem9v/k1BUe6edIO9CQrhIITFdnT6B6NxmpQ2rFvK/hwboqOFRoL/ 6v8nHtV3SIkxHiT06slkNeXvLKDGBr/3pFzswz/pPDXKiIJpeVbwFrFBv6L6V2Bz P0MdbRFEO8KODud8Z+ZTl3Gwqlv/8ISb18dOuxaPtK/cbNzffrmZqwvNe6IfkVGW zQrxnknxoLHb07lQ1lRHQiwHvmOdlK5l/9VVVE07fRUbIvR05JdX0KhU/1rs3dPv Gsu25nb5Jn59rWTlRzw0O9P5ER/AMObfjsMMhF/Fj8bzcLGSJVhrNXGtWQ/+D20I zsDJOfoWiwIa1ezoY7S8nIj0sNz5Xp14+MMOw2Wz0L1lXGla9qJsUNQANlI933Uz zXwDSGLEhLkaNwvOXLXNVPnnTkenNeDPPeaBJ7FuJo5o/1UxQOs= =1tXJ -----END PGP SIGNATURE----- Merge tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc Pull "Amlogic SoC updates for v4.15" from Kevin Hilman: - add SMP support to Meson8/8b * tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation |
|
|
Arnd Bergmann
|
84d711caed |
Allwinner core changes for 4.15
A bunch of patches for the sunxi documentation and mach-sunxi. The most notable feature is the introduction of the R40 support. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZ6alxAAoJEBx+YmzsjxAg518P/2GKSpQu/vnttFl4ofOYGGhR 2D3avz5fuCBeZxVtYi0Iqc6YSMR8yuh9UUNdCMqJWmHhF8ULd61MeliK9MCQ5EDe zini3rwQuI1XX2k7ICXhdORjtyZzaf5go/OZ3jIurrEGYlzSW8HPXBh2X3OyjoNr xThbXC5oC6VHIFLOYQd6OoRR85ssP0yN/V8c8WlWBMyNnC/K8NhGFK0vdt2b7HEp 1C01/DVmduVOhCsAGVoIYYxBNi662IYrSPbh1TKMiPIjnrVkyxDZBkBADCOFFImb CCcyUNz44+XnToYCHNKblOmNnh6HQ6heggXZa2761+hYAgULA/6W/nYjYJCzHfT3 uFT4sVG3uXM0O4g+TDqL26Qatc/Lmitv/tIe2tpVvRX9UJhXopqk414GUf4upYc+ cIRKvNmUvhV5QkyGFdiJZpNmGK5uTzWpFO6RJjpGx78uswcISASa+lgZ2jEmNmjP a7l8mat4YvI+DIwcPnpQ7hneB2wRaGOFjO6U9OD+CcyhOC1c52G6yiHNZlZCp/si ZOSOf+1OWB4qWhsB+BGp5t8sVRhvyQe6brC+PAkhnrvQs8AKp9i/f772f0n+nsPj btFuE7zKygSA0cLdUty0eu6gPv+LM7p+SR3T/2v8MJHLWcQW9Q6m/r4hqHf2LXF+ JME22AEp2AZ9IED/YmlB =2O2j -----END PGP SIGNATURE----- Merge tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc Pull "Allwinner core changes for 4.15" from Maxime Ripard: A bunch of patches for the sunxi documentation and mach-sunxi. The most notable feature is the introduction of the R40 support. * tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: add support for R40 SoC ARM: sunxi: fix the core number of V3s in sunxi README dt-bindings: add compatible string for Allwinner V3s SoC |
|
|
Carlo Caione
|
9c52aaf756 |
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
With this patch we add documentation for: * power-management-unit: the PMU is used to bring up the cores during SMP operations * sram: among other things the sram is used to store the first code executed by the core when it is powered up * cpu-enable-method: the CPU enable method used by Amlogic Meson8 and Meson8b SoCs Signed-off-by: Carlo Caione <carlo@endlessm.com> [also add Meson8 to the documentation] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Andreas Färber
|
d109cbf184 |
dt-bindings: arm: realtek: Document MeLE V9
Define a compatible string for MeLE V9 Media Player. Cc: meleservice@mele.cn Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Arnd Bergmann
|
ea9e3fbc17 |
Samsung soc drivers changes for v4.15
Remove of Exynos4212 related dead code (no more support for this SoC). -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZ4xBvAAoJEME3ZuaGi4PXSroP/inI0fpKpo9U3ciCTOvYiO5y zu6TxJP7xUu43vFBLdTA7FOaddSHnpvAGQ9hS4HXs1F5/+paeqhqJ+U6BPwrC1na VJPEmdTL3wrp46V9AGoaMZBlLFP5zjIgAvez1QhgOd8GiveS6o9ZDE4N7MidB1ob SXGfmKw4yVJQ6TrCKUcx8M1yyov9125d8GVWNA2WP67UR/vtSOdH7rMLwh1Mvoi+ eJpABOx9ZQfzyNxcFvBjr2wCMkqTb6muPiTl0UIzVZ16aya8Dx4UznEjMCgmdkQX ZtaZI+CJahpnzzi9+EKJzBsm57Q4jWV4TJujLrjZ59sI3zsKkNs9R7L8gwQdzYKa slhCXNLBG2/g3DQ+Gl8nM3vT/DJgNlcEvStmGU5SoQuYBr1w75XpK/kDKZs25zxF Tjz3mzXj1eg4aZT/Ier1jV05ej26AvwG0AJfgvKFl3L3kBG5Zi32mZqhh0aD93Fg v832J/BZQ3+Cqha7U1uW1ESBFftRiBg4Y0yfI1WaD//Yu5PlNDnHd098bPeXdvCG 2tWQ4wzSjKUX9ZzTIhLgGpv6T+vkP/nvW9ufDMUUf7SVWMmIjE4q0LCwNk4zRxGp YvcMkn9xuXyG+DRjK/dyz85qV1AbtGobeImL2G+6SEL8XVnW3yTqxhJdaAQWjFH/ 8DwxWwhWs/AvVptTKeBw =7Lj1 -----END PGP SIGNATURE----- Merge tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "Samsung soc drivers changes for v4.15" from Krzysztof Kozłowski: Remove of Exynos4212 related dead code (no more support for this SoC). * tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Remove Exynos4212 related dead code |
|
|
Arnd Bergmann
|
6f4bd48ff9 |
Merge tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "non-urgent device tree fixes for omaps for v4.15 merge window" from Tony Lindgren Non-urgent device tree fixes for omaps that can all wait for v4.15 merge window. Turns out that we have many devices working just because we have the legacy platform data still around. This is mostly an issue for omap4, other SoCs just have minimal fixes needed. As many of the missing device tree nodes and properties are for devices that have no drivers in the mainline kernel, such as slimbus, iss, mcasp, aess, fdif and gpu, we might as well start using the new "ti,sysc" interconnect target module binding for them so we can get the devices with no child device drivers idled. This also makes it possible to drop unnecessary platform data in later patches. * tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix typo for omap4 mcasp rx path ARM: dts: Configure SmartReflex only to idle the interconnect target module ARM: dts: Add nodes for missing omap4 interconnect target modules dt-bindings: bus: Minimal TI sysc interconnect target module binding ARM: dts: Add missing hwmod related properties for dra7 ARM: dts: Add missing hwmod related nodes for am33xx ARM: dts: Add missing dma hwmod property for omap5 ARM: dts: Add missing wdt3 node for omap4 ARM: dts: Add missing hsi node for omap4 ARM: dts: Add missing onewire node for omap4 ARM: dts: Add missing smartreflex node and binding for omap4 ARM: dts: Add missing hwmods property for omap4 dma ARM: dts: Add missing properties for omap4 control modules ARM: dts: Configure pmu without interrupt for omap4430 ARM: dts: Add missing dma hwmods property for omap3 |
|
|
Arnd Bergmann
|
19748e26f7 |
Merge tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "Rockchip dts32 updates for 4.15 part1" from Heiko Stübner: One new board the Vyasa from Amarula Solutions using a rk3288 and core lvds node for the newly added driver+binding. Also bindings + nodes for the Mali-Utgard GPUs found on some Rockchip socs like rk3036 and rk3188. With the recently revived Lima project they can even render a red triangle to a png file. * tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Enable thermal on rk3288-vyasa board ARM: dts: rockchip: fix mali400 ppmmu interrupt names ARM: dts: rockchip: Enable mali GPU node on rk3288-vyasa ARM: dts: rockchip: enable gpu on rk3188-radxarock ARM: dts: rockchip: add gpu nodes on rk3066/rk3188 ARM: dts: rockchip: add rk322x gpu node ARM: dts: rockchip: enable the gpu on rk3036-kylin boards ARM: dts: rockchip: add rk3036 gpu node dt-bindings: gpu: mali-utgard: add optional power-domain reference dt-bindings: gpu: mali-utgard: add optional supply regulator dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis ARM: dts: rockchip: enable vops and hdmi output on rk3288-vyasa ARM: dts: rockchip: Add rk3288 vyasa board dt-bindings: Add vendor prefix for Amarula Solutions ARM: dts: rockchip: add LVDS node for rk3288 |
|
|
Arnd Bergmann
|
061ae53266 |
Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski: 1. Add new board: Hardkernel Odroid HC1. 2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to possible overheat if first pair of A7+A15 cores is idle but rest of CPUs are busy. 3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs. 4. Add power button to Odroid XU3/4. 5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5. 6. Add suspend quirk to DWC3 USB controller to fix enumeration of SuperSpeed devices on Odroid XU4. 7. Add HDMI and MHL to Trats2. 8. Cleanups (redundant properties and nodes). * tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: samsung: Document binding for new Odroid HC1 board ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi ARM: dts: exynos: Add dwc3 SUSPHY quirk ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420 ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards ARM: dts: exynos: Add power button for Odroid XU3/4 ARM: dts: exynos: Remove the display-timing and delay from Rinato ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition |
|
|
Yixun Lan
|
1000cec2f0 |
dt-bindings: arm: amlogic: Add Meson AXG binding
Introduce new bindings for the Meson AXG SoC which now have different memory layout. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Will Deacon
|
4b8b77a4ec |
dt-bindings: Document devicetree binding for ARM SPE
This patch documents the devicetree binding in use for ARM SPE. Cc: Rob Herring <robh@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
|
|
Andreas Färber
|
f80ec175ba |
dt-bindings: arm: realtek: Add ProBox2 AVA
Document a compatible string for the PROBOX2 AVA TV Box. Cc: support@probox2.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Krzysztof Kozlowski
|
3991e05483 |
dt-bindings: samsung: Document binding for new Odroid HC1 board
Document the binding for new Hardkernel Odroid HC1 board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> |
|
|
Florian Fainelli
|
bc811c697b |
dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
Add binding documentation for the Broadcom Hurricane 2 SoCs used in switching control planes. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
|
|
Neil Armstrong
|
abe8bbd308 |
dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding
Cc: support@tronsmart.com Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Oleg Ivanov <balbes-150@yandex.ru> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Neil Armstrong
|
b8b74dda39 |
ARM64: dts: meson-gxm: Add support for Khadas VIM2
The Khadas VIM2 is a Single Board Computer, respin of the origin Khadas VIM board, using an Amlogic S912 SoC and more server oriented. It provides the same external connectors and header pinout, plus a SPI NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header and Pogo Pads Arrays. Cc: Gouwa <gouwa@szwesion.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Marek Szyprowski
|
c40610198f |
soc: samsung: Remove Exynos4212 related dead code
Support for Exynos4212 SoCs has been removed by commit
|
|
|
Martin Blumenstingl
|
aee2828ccb |
dt-bindings: Amlogic: add documentation for the SoC info register areas
There are three register areas which contain information about the SoC version and revision: - the assist registers contain the SoC's "major version" which encodes the SoC generation and part number. this is available on Meson6, Meson8 and Meson8b SoCs. - the bootrom register contains at least the SoCs "misc version". this is avilable on Meson6, Meson8 and Meson8b - the analog top registers contain information about the SoC revision. this is only available on Meson8 and Meson8b Not much else is currently known about these registers. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Simon Horman
|
2e931b06de |
ARM: shmobile: remove inconsistent ; from documentation
Consistently do not suffix compat string documentation with a ';' Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Icenowy Zheng
|
14e25a0368 |
ARM: sunxi: add support for R40 SoC
Allwinner R40 is a new SoC, with Quad Core Cortex-A7 and peripherals like A20. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
|
|
Icenowy Zheng
|
b69116cd96 |
dt-bindings: add compatible string for Allwinner V3s SoC
The compatible string for Allwinner V3s SoC used to be missing.
Add it to the binding document.
Fixes:
|
|
|
Sergei Shtylyov
|
e22b36bd75 |
arm64: renesas: document Eagle board bindings
Document the Eagle device tree bindings, listing it as a supported board. This allows to use checkpatch.pl to validate .dts files referring to the Eagle board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
|
|
Vladimir Barinov
|
5418a90041 |
arm: shmobile: Document Kingfisher board DT bindings
Add Kingfisher Device tree bindings Documentation, listing it as a supported board. Kingfisher is the H3ULCB/M3ULCB extension board. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
|
|
Tony Lindgren
|
1d6a332ae8 |
ARM: dts: Add missing properties for omap4 control modules
On omap4, we are missing several ti,hwmods properties and IO ranges for system control modules. These are needed by the SoC interconnect code. Note that this will only show up as a bug with "doesn't have mpu register target base" boot errors when the legacy platform data is removed. In order to add these, we need to move omap4_pmx_wkup to be a child of omap4_padconf_wkup. On omap4 there are separate modules for control module and control module pads. For control module core, we have this already configured except for the missing ti,hwmods and reg entries. Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Florian Fainelli
|
9600c2340d |
dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding
Update the Broadcom STB Power Management binding document with new compatible strings for the DDR PHY and memory controller found on newer chips. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
|
|
Geert Uytterhoeven
|
443c163117 |
ARM: shmobile: Document R-Car V3M SoC DT bindings
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
|
|
Jagan Teki
|
15306b752f |
ARM: dts: rockchip: Add rk3288 vyasa board
This patch adds initial support for rk3288 based Vyasa board, which is made by Amarula Solutions. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Linus Torvalds
|
e90937e756 |
ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
window. This time around, 559 patches affecting both 32- and 64-bit
platforms.
Changes are too many to list individually, but some of the larger ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also several
new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R45j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
|
|
|
Linus Torvalds
|
ae46654bcf |
ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver subsystems
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZtdt7AAoJEIwa5zzehBx3EboP/jR2T9lrMavXR1zL48L14yJb
S+fiJlrX1Kr42UF4PQvsfs+uTqOLmycrPVFkMb6IwoUPzQ9UCOSoiMzYm2b7ZPvt
uIesHhdM3/xun6wKfieN8GmNA1yDVynTxo0TTYDw5ha7I6s2GHgw0GSFzy3wm0Qg
KzerAO3gzf3L5XsKR0cai3IXNjHO9ubpFG1ReR09da28nPElP8ggWg0KnqdO76Ch
BGpFj78EC875ZNqwHgnspUqgGDJnBjig3m/uA4FWA0G9Jl38tCyKTZfUR7cEraoV
kyCgBlR/UrI8eXVTyEy5k5iTsQ3A1VhX4rGjyH+5NZHTs1yWr4+RDND/qeGl9tSo
VASuOtH6Rc3vdUDpHPBNAFNQH8fwwDoKf96dvN1tiffsx6LSKb//NyOfkXzKOtR6
CP5raYfX4YktLtHq0XVTZ/6r3XmLcTHzElR/dCFpQOFcTOYii0pWtfcWouahbZ1w
dhoBX/dbNq37MfzrxtHN2VTIEHpn2GU7u+ZGkp2ArokD58BAft/M3Xee1cDnF75g
ZDwe5eNFT8aBZKaY7zwG8cdxiw9kACAivDRwW+zgpfUr39c+d0+QmVfnfJh4EGXK
Ri6yr2EfBWK6jw3cwkdSyyt7iSzIkB+RiuuD1MjpYhWzAvoDpzqkXYukFGbpXnuy
vUFHNuP1ocUsRtCs8mm1
=yBzS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This branch contains platform-related driver updates for ARM and ARM64.
Among them:
- Reset driver updates:
+ New API for dealing with arrays of resets
+ Make unimplemented {de,}assert return success on shared resets
+ MSDKv1 driver
+ Removal of obsolete Gemini reset driver
+ Misc updates for sunxi and Uniphier
- SoC drivers:
+ Platform SoC driver registration on Tegra
+ Shuffle of Qualcomm drivers into a submenu
+ Allwinner A64 support for SRAM
+ Renesas R-Car R3 support
+ Power domains for Rockchip RK3366
- Misc updates and smaller fixes for TEE and memory driver
subsystems"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
soc/tegra: fuse: Add missing semi-colon
soc/tegra: Restrict SoC device registration to Tegra
drivers: soc: sunxi: add support for A64 and its SRAM C
drivers: soc: sunxi: add support for remapping func value to reg value
drivers: soc: sunxi: fix error processing on base address when claiming
dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
bus: sunxi-rsb: Enable by default for ARM64
soc/tegra: Register SoC device
firmware: tegra: set drvdata earlier
memory: Convert to using %pOF instead of full_name
soc: Convert to using %pOF instead of full_name
bus: Convert to using %pOF instead of full_name
firmware: Convert to using %pOF instead of full_name
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
reset: uniphier: add analog amplifiers reset control
reset: uniphier: add video input subsystem reset control
...
|
|
|
Linus Torvalds
|
7f1b9be13a |
ARM/arm64: SoC platform updates for v4.14
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
|
|
|
Linus Torvalds
|
74fee4e88f |
DeviceTree updates for 4.14:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays.
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans.
- Correct unittests to use preferred "okay" for "status" property value.
- Add a KASLR seed property.
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa.
- Fix modalias buffer handling.
- Clean-up of include paths for building dtbs.
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices.
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC.
- Add compatible string for Allwinner H5 Mali-450 GPU.
- Fix links to old OpenFirmware docs with new mirror on devicetree.org.
- Remove status property from binding doc examples.
-----BEGIN PGP SIGNATURE-----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=IBAh
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"There's a few orphans in the conversion to %pOF printf specifiers
included here that no one else picked up.
Summary:
- Convert more DT code to use of_property_read_* API.
- Improve DT overlay support when adding multiple overlays
- Convert printk's to %pOF format specifiers. Most went via subsystem
trees, but picked up the remaining orphans
- Correct unittests to use preferred "okay" for "status" property
value
- Add a KASLR seed property
- Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa
- Fix modalias buffer handling
- Clean-up of include paths for building dtbs
- Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10
devices
- Add nvmem bindings for MediaTek MT7623 and MT7622 SoC
- Add compatible string for Allwinner H5 Mali-450 GPU
- Fix links to old OpenFirmware docs with new mirror on
devicetree.org
- Remove status property from binding doc examples"
* tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
devicetree: Adjust status "ok" -> "okay" under drivers/of/
dt-bindings: Remove "status" from examples
dt-bindings: pinctrl: sh-pfc: Use generic node name
dt-bindings: Add vendor Mellanox
dt-binding: net/phy: fix interrupts description
virt: Convert to using %pOF instead of full_name
macintosh: Convert to using %pOF instead of full_name
ide: pmac: Convert to using %pOF instead of full_name
microblaze: Convert to using %pOF instead of full_name
dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/
of: Use PLATFORM_DEVID_NONE definition
of/device: Fix of_device_get_modalias() buffer handling
of/device: Prevent buffer overflow in of_device_modalias()
dt-bindings: add amc6821, isl1208 trivial bindings
dt-bindings: add vendor prefix for Theobroma Systems
of: search scripts/dtc/include-prefixes path for both CPP and DTC
of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP
of: remove drivers/of/testcase-data from include search path for CPP
of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered
iio: srf08: add device tree binding for srf02 and srf10
...
|
|
|
Olof Johansson
|
b884026a2b |
Merge branch 'next/dt64' into next/dt
* next/dt64: (233 commits) arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names ARM64: dts: meson-gx: Add AO CEC nodes ARM64: dts: meson-gx: update AO clkc to new bindings arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: zynqmp: Add generic compatible string for I2C EEPROM ... |
|
|
Linus Torvalds
|
bafb0762cb |
Char/Misc drivers for 4.14-rc1
Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
bePIh/JI5WxWoHK+wEbY
=hYWx
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while"
* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
ANDROID: binder: push new transactions to waiting threads.
ANDROID: binder: remove proc waitqueue
android: binder: Add page usage in binder stats
android: binder: fixup crash introduced by moving buffer hdr
drivers: w1: add hwmon temp support for w1_therm
drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
drivers: w1: add hwmon support structures
eeprom: idt_89hpesx: Support both ACPI and OF probing
mcb: Fix an error handling path in 'chameleon_parse_cells()'
MCB: add support for SC31 to mcb-lpc
mux: make device_type const
char: virtio: constify attribute_group structures.
Documentation/ABI: document the nvmem sysfs files
lkdtm: fix spelling mistake: "incremeted" -> "incremented"
perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
nvmem: include linux/err.h from header
...
|
|
|
Rob Herring
|
4da722ca19 |
dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Olof Johansson
|
c78c4ec2f2 |
mvebu dt64 for 4.14 (part 3)
Add description for a new family SoC from Marvell: Armada-8KP. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlmeipsACgkQCwYYjhRyO9UnEACcDuFAUJNT2eth5lYMHoHcvMLf x7QAnjqghjBpm7nYOutsYPY5gwz/YYC6 =+kES -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu into next/dt64 mvebu dt64 for 4.14 (part 3) Add description for a new family SoC from Marvell: Armada-8KP. * tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add Device Tree files for Armada-8KP Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
940bf1d6f7 |
- mt7623: add mt7623n and mt7623a plattform
- add mt7623 based reference boards - mt7623: add usb3, ethernet, cpufreq, - Add banana-pi board - add mt6323 pmic - mt2701: add larb-id property to smi larb -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlmVfAMXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00NzChAAnj/93phTJunguMQlmiLopPFq a6ojH7ETUom+cajkm+vrYoJgfltYi4ghVfJhjlqsUNIjKfdT8GcfH9Ic0ceOgJIJ d1ss1D5SVuvtDshhS4Ja6NP5oBXLjpvf3Mf5AIcOMkWw0d+dmPk4wJQ4WnyaWUdz 8RzN4i9JNdcvTuFLpq99gdJerS/sQ1oXAd1QzIcvKr4YFzdxE/RrBLOBVHxP6OpD N8/hIb2bVsS1vfaPsI/UeN19jpxTxMrttRYCt1PBVcwribifG+C+jQg9kJXnewaj J/3FoXQBtLwoSDDxZq/p5woDZhfDnsgAo0szmHbxVBdrKZWPvWxekneoc8uYnFI4 i9NVtpnPSVGzCxuHrEwOVWuS4okKgwEho6tqot8P7MzjwQ4v0ms9S3m/bJz55ZIf QCqnPHb4LMnwdkHhgI4oFgz5YjsC3pjsxcsEbC3VNyFx4qfbq8u9ZcjQWOUxPitF R+tlJVp0TJOJkOg2ZMAqaF0BYM7NeXmC2owKSM649k6/n/Mw44tLm8SGPTBPzq6n Iyxlf3vir+eGKhVfgOLhHd/3Yre1qPxcZ5KwwEJHo8f3alWUE4fCORtu2TWnaxhp 5dkt7j8QlNAoti7apo8eiN4srWSv2GZJNeR5gth0X9KNFzyKt/gIsIRQCf38UqbF NwMfgKXfcXGI6DOt7To= =yAoq -----END PGP SIGNATURE----- Merge tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek into next/dt - mt7623: add mt7623n and mt7623a plattform - add mt7623 based reference boards - mt7623: add usb3, ethernet, cpufreq, - Add banana-pi board - add mt6323 pmic - mt2701: add larb-id property to smi larb * tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek: arm: dts: mt7623: cleanup binding file arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2 arm: dts: mediatek: add larbid property for larb arm: dts: mt7623: fix mmc interrupt assignment arm: dts: mt2701: Add usb3 device nodes arm: dts: mt2701: Add ethernet device node arm: dts: mt7623: add clock-frequency to CPU nodes arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board arm: dts: mt7623: enable the nand device on the mt7623n nand rfb arm: dts: mt7623: enable the usb device on the mt7623n rfb arm: dts: mt7623: cleanup the mt7623n rfb uart nodes arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi arm: dts: mt7623: add mt6323.dtsi file dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards arm: dts: mt7623: fixup binding violation missing reset in ethernet node dt-bindings: net: mediatek: update documentation for reset signals Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Suzuki K Poulose
|
1c8859848d |
coresight replicator: Cleanup programmable replicator naming
The Linux coresight drivers define the programmable ATB replicator as
Qualcomm replicator, while this is designed by ARM. This can cause
confusion to a user selecting the driver. Cleanup all references to
make it explicitly clear. This patch :
1) Replace the compatible string for the replicator :
qcom,coresight-replicator1x => arm,coresight-dynamic-replicator
2) Changes the Kconfig symbol (since this is not part of any defconfigs)
CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR
3) Improves the help message in the Kconfig.
4) Changes the name of the driver and the file :
coresight-replicator-qcom => coresight-dynamic-replicator
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
Arnd Bergmann
|
e9a203a7cf |
3 new boards, the rk3328-based Rock64 from the Pine64-makers, the
Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmdnagQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSpBB/9v6flM/QtBVeXhR1tfrXIt3veUaiwiTwhg PIj6J7EJZCgA9TiHr4zcQzjCx581a9v1rUEpnhZyi7d/zrNurpJRYtBNcqfDS28Z kyL30gwf/y4nVAzgIODGMNRWe3+IETNCIRZ236cV7jr9HgKmHvA0qc2aMzjHPMCF XS9wPXgEW1kYIgKqzq1drAWY3iVB0W37KMX9HKVQfAlPcGu5jobk0lruQBZV0InH 8NR3NB9a7eknzPejmBO2ga0idS0oAc/eFQ8h2bHrxWVm1JO+2QDc7epxWCTmxBcP DLy+7tuQiXEFc25AM3QpW97pJuqDT+zeZXd/F5BK5uGnpH63SNbi =D65g -----END PGP SIGNATURE----- Merge tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner: 3 new boards, the rk3328-based Rock64 from the Pine64-makers, the Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. * tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: dts: rockchip: Add basic cpu frequencies for RK3368 arm64: dts: rockchip: add rk805 node for rk3328-evb arm64: dts: rockchip: Assign mic irq to correct device for Gru arm64: dts: rockchip: init rk3399 vop clock rates arm64: dts: rockchip: Add pwm nodes for rk3328 arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3 arm64: dts: rockchip: remove num-slots property from rk3399-sapphire arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board arm64: dts: rockchip: add thermal nodes for rk3328 SoC arm64: dts: rockchip: add tsadc node for rk3328 SoC arm64: dts: rockchip: add rk3328 i2s nodes ... |
|
|
Hanna Hawa
|
bf32f2aeb2 |
arm64: dts: marvell: add Device Tree files for Armada-8KP
This commit adds the base Device Tree files for the Armada 8KPlus. The Armada 8KP SoCs include several hardware blocks, and this commit only adds support for the AP810 block, that contains the CPU core and basic peripherals. AP810 is a high-performance die, includes octal core application processor based ARMv8-A architecture, two standard high speed DDR4 interface, and GIC-600 interrupt controller. AP810 Built as part of Marvell’s MoChi AP family products. Armada-8080 (8KPlus family), include an AP810 block that contains the CPU core and basic peripherals. This commit creates the following hierarchy: * armada-ap810-ap0.dtsi - definitions common to AP810 * armada-ap810-ap0-octa-core.dtsi - description of the octa cores * armada-8080.dtsi - description of the 8080 SoC * armada-8080-db.dts - description of the 8080 board Signed-off-by: Hanna Hawa <hannah@marvell.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Klaus Goger
|
68987f4494 |
dt-bindings: add rk3399-q7 SoM
RK3399-Q7 is a Qseven compatible system-on-module by Theobroma Systems. This adds the module and the EVK baseboard "Haikou" Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |