Marvell has different values for the state of a MAC address,
depending on its multicast bit. This patch completes the definitions
for these states.
At the same time, use 0 which is intuitive enough and simplifies the
code a bit, instead of the UC or MC unused value.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the array modes on the stack but instead make it
static const. Makes the object code smaller by 303 bytes.
Before:
text data bss dec hex filename
51240 5008 1312 57560 e0d8 mellanox/mlx4/en_ethtool.o
After:
text data bss dec hex filename
50937 5008 1312 57257 dfa9 mellanox/mlx4/en_ethtool.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-09-09
This series contains a variety of cold and hot savoury changes to Intel
drivers. Some of the fixes could be considered for stable even though
the author did not request it.
Hulk Robert cleans up (i.e. removes) a function that has no caller for
the iavf driver.
Radoslaw fixes an issue when there is no link in the VM after the
hypervisor is restored from a low-power state due to the driver not
properly restoring features in the device that had been disabled during
the suspension for ixgbevf.
Kai-Heng Feng modified e1000e to use mod_delayed_work() to help resolve
a hot plug speed detection issue by adding a deterministic 1 second
delay before running watchdog task after an interrupt.
Sasha moves functions around to avoid forward declarations, since the
forward declarations are not necessary for these static functions in
igc. Also added a check for igc during driver probe to validate the NVM
checksum. Cleaned up code defines that were not being used in the igc
driver. Adds support for IP generic transmit checksum offload in the
igc driver.
Updated the iavf kernel documentation by a developer with no life.
Jake provides another fm10k update to a local variable for ease of code
readability.
Mitch fixes the iavf driver to allow the VF to override the MAC address
set by the host, if the VF is in "trusted" mode.
Mauro S. M. Rodrigues provides several changes for i40e driver, first
with resolving hw_dbg usage and referencing a i40e_hw attribute. Also
implemented a debug macro using pr_debug, since the use of netdev_dbg
could cause a NULL pointer dereference during probe. Finally cleaned up
code that is no longer used or needed.
Firo Yang provides a change in the ixgbe driver to ensure we sync the
first fragment unconditionally to help resolve an issue seen in the XEN
environment when the upper network stack could receive an incomplete
network packet.
Mariusz adds a missing device to the i40e PCI table in the driver.
v2: Mauro S. M. Rodrigues updated patches 10 & 11 of the series based on
feedback from Jakub Kicinski. Also updated patch 13 description so
that the "Fixes:" tag was no wrapped.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
could possibly allocate a page, DMA memory buffer, for the first
fragment which is not suitable for Xen-swiotlb to do DMA operations.
Xen-swiotlb have to internally allocate another page for doing DMA
operations. This mechanism requires syncing the data from the internal
page to the page which ixgbe sends to upper network stack. However,
since commit f3213d9321 ("ixgbe: Update driver to make use of DMA
attributes in Rx path"), the unmap operation is performed with
DMA_ATTR_SKIP_CPU_SYNC. As a result, the sync is not performed.
Since the sync isn't performed, the upper network stack could receive
a incomplete network packet. By incomplete, it means the linear data
on the first fragment(between skb->head and skb->end) is invalid. So
we have to copy the data from the internal xen-swiotlb page to the page
which ixgbe sends to upper network stack through the sync operation.
More details from Alexander Duyck:
Specifically since we are mapping the frame with
DMA_ATTR_SKIP_CPU_SYNC we have to unmap with that as well. As a result
a sync is not performed on an unmap and must be done manually as we
skipped it for the first frag. As such we need to always sync before
possibly performing a page unmap operation.
Fixes: f3213d9321 ("ixgbe: Update driver to make use of DMA attributes in Rx path")
Signed-off-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since commit
'5098850c9b9b ("i40e/i40evf: i40e_register.h updates")'
it is no longer possible to trigger an EMP Reset from debugfs, but it's
possible to request it either way, to end up with a bad reset request:
echo empr > /sys/kernel/debug/i40e/0002\:01\:00.1/command
i40e 0002:01:00.1: debugfs: forcing EMPR
i40e 0002:01:00.1: bad reset request 0x00010000
So let's remove this piece of code and show the available valid commands
as it is when any invalid command is issued.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
There are several uses of hw_dbg in the code, producing no output. This
patch implements it using dev_debug.
Initially the intention was to implement it using netdev_dbg, analogously
to what is done in ixgbe for instance. That approach was avoided due to
some early usages of hw_dbg, like i40e_pf_reset, before the VSI structure
initialization causing NULL pointer dereference during the driver probe if
the debug messages were turned on as soon as the module is probed.
v2:
- Use dev_dbg instead of pr_debug, and take advantage of dev_name
instead of crafting pretty much the same device name locally as suggested
by Jakub Kicinski.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The mentioned function references a i40e_hw attribute, as parameter for
hw_dbg, but it doesn't exist in the function scope.
Fixes it by changing parameters from i40e_hmc_info to i40e_hw which can
retrieve the necessary i40e_hmc_info.
v2:
- Fixed reverse xmas tree code style issue as suggested by Jakub Kicinski
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
PCIe device control 2 defines does not use internally.
This patch comes to clean up those.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Allow the VF to override the "permanent" MAC address set by the host.
This allows bonding to work in the case where the administrator has set
the VF MAC.
Note that the VF must still be set to Trusted on the host if this change
is to be accepted by the PF driver.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In the function fm10k_xmit_frame_ring, we recently switched to using
the skb_frag_size accessor instead of directly using the size member of
the skb fragment.
This made the for loop slightly harder to read because it created a very
long line that is difficult to split up. Avoid this by using a local
variable in the for loop, so that we do not have to break the line on an
open parenthesis.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Update the LAN driver documentation to include the latest feature
implementation and driver capabilities.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Move igc_phy_setup_autoneg, igc_wait_autoneg and igc_set_fc_watermarks
up to avoid forward declaration.
It is not necessary to forward declare these static methods.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
After hot plugging an 1Gbps Ethernet cable with 1Gbps link partner, the
MII_BMSR may report 10Mbps, renders the network rather slow.
The issue has much lower fail rate after commit 59653e6497 ("e1000e:
Make watchdog use delayed work"), which essentially introduces some
delay before running the watchdog task.
But there's still a chance that the hot plugging event and the queued
watchdog task gets run at the same time, then the original issue can be
observed once again.
So let's use mod_delayed_work() to add a deterministic 1 second delay
before running watchdog task, after an interrupt.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixed issue in VM which shows no link when hypervisor is
restored from low-power state. The driver is responsible for re-enabling
any features of the device that had been disabled during suspend calls,
such as IRQs and bus mastering.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
There is no caller of function iavf_debug_d() in tree since
commit 75051ce4c5 ("iavf: Fix up debug print macro"),
so it can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jakub Kicinski says:
====================
net/tls: small TX offload optimizations
This set brings small TLS TX device optimizations. The biggest
gain comes from fixing a misuse of non temporal copy instructions.
On a synthetic workload modelled after customer's RFC application
I see 3-5% percent gain.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike normal TCP code TLS has to touch the cache lines
it copies into to fill header info. On memory-heavy workloads
having non temporal stores and normal accesses targeting
the same cache line leads to significant overhead.
Measured 3% overhead running 3600 round robin connections
with additional memory heavy workload.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For TLS device offload the tag/message authentication code are
filled in by the device. The kernel merely reserves space for
them. Because device overwrites it, the contents of the tag make
do no matter. Current code tries to save space by reusing the
header as the tag. This, however, leads to an additional frag
being created and defeats buffer coalescing (which trickles
all the way down to the drivers).
Remove this optimization, and try to allocate the space for
the tag in the usual way, leave the memory uninitialized.
If memory allocation fails rewind the record pointer so that
we use the already copied user data as tag.
Note that the optimization was actually buggy, as the tag
for TLS 1.2 is 16 bytes, but header is just 13, so the reuse
may had looked past the end of the page..
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All modifications to TLS record list happen under the socket
lock. Since records form an ordered queue readers are only
concerned about elements being removed, additions can happen
concurrently.
Use RCU primitives to ensure the correct access types
(READ_ONCE/WRITE_ONCE).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's generally more cache friendly to walk arrays in order,
especially those which are likely not in cache.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2019-09-06
Here's the main bluetooth-next pull request for the 5.4 kernel.
- Cleanups & fixes to btrtl driver
- Fixes for Realtek devices in btusb, e.g. for suspend handling
- Firmware loading support for BCM4345C5
- hidp_send_message() return value handling fixes
- Added support for utilizing Fast Advertising Interval
- Various other minor cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the array spec_opcode on the stack but instead make it
static const. Makes the object code smaller by 48 bytes.
Before:
text data bss dec hex filename
6914 1040 128 8082 1f92 hns3/hns3vf/hclgevf_cmd.o
After:
text data bss dec hex filename
6866 1040 128 8034 1f62 hns3/hns3vf/hclgevf_cmd.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 281 bytes.
Before:
text data bss dec hex filename
87553 5672 0 93225 16c29 benet/be_cmds.o
After:
text data bss dec hex filename
87112 5832 0 92944 16b10 benet/be_cmds.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Improvements and fixes for -next
Improvements and fixes for recently introduced features. All for -next tree.
More info in commit logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We may have some SoCs that can't achieve XGMAC max speed. Limit it if
asked to.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test to validate that Split Header feature is working correctly.
It works by using the rececently introduced counter that increments each
time a packet with split header is received.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are already doing it by default in the TX path so we can also enable
Jumbo Frame support in the RX path independently of MTU value.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set the RX tail pointer so that RX engine starts working
again after finishing the Flow Control test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add checks for support of Source Address Insertion/Replacement before
running the test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a re-post of previous patch wrote by David Miller[1].
Phil Karn reported[2] that on busy networks with lots of unresolved
multicast routing entries, the creation of new multicast group routes
can be extremely slow and unreliable.
The reason is we hard-coded multicast route entries with unresolved source
addresses(cache_resolve_queue_len) to 10. If some multicast route never
resolves and the unresolved source addresses increased, there will
be no ability to create new multicast route cache.
To resolve this issue, we need either add a sysctl entry to make the
cache_resolve_queue_len configurable, or just remove cache_resolve_queue_len
limit directly, as we already have the socket receive queue limits of mrouted
socket, pointed by David.
>From my side, I'd perfer to remove the cache_resolve_queue_len limit instead
of creating two more(IPv4 and IPv6 version) sysctl entry.
[1] https://lkml.org/lkml/2018/7/22/11
[2] https://lkml.org/lkml/2018/7/21/343
v3: instead of remove cache_resolve_queue_len totally, let's only remove
the hard code limit when allocate the unresolved cache, as Eric Dumazet
suggested, so we don't need to re-count it in other places.
v2: hold the mfc_unres_lock while walking the unresolved list in
queue_count(), as Nikolay Aleksandrov remind.
Reported-by: Phil Karn <karn@ka9q.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang says:
====================
hv_netvsc: Enable sg as tunable, sync offload settings to VF NIC
This patch set fixes an issue in SG tuning, and sync
offload settings from synthetic NIC to VF NIC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
VF NIC may go down then come up during host servicing events. This
causes the VF NIC offloading feature settings to roll back to the
defaults. This patch can synchronize features from synthetic NIC to
the VF NIC during ndo_set_features (ethtool -K),
and netvsc_register_vf when VF comes back after host events.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Mark Bloch <markb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a previous patch, the NETIF_F_SG was missing after the code changes.
That caused the SG feature to be "fixed". This patch includes it into
hw_features, so it is tunable again.
Fixes: 23312a3be9 ("netvsc: negotiate checksum and segmentation parameters")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Allover mlx5 cleanups
2) Added port congestion counters to ethtool stats:
Add 3 counters per priority to ethtool using PPCNT:
2.1) rx_prio[p]_buf_discard - the number of packets discarded by device
due to lack of per host receive buffers
2.2) rx_prio[p]_cong_discard - the number of packets discarded by device
due to per host congestion
2.3) rx_prio[p]_marked - the number of packets ECN marked by device due
to per host congestion
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl1xgcsACgkQSD+KveBX
+j7XSwf6A6Ri61kZ4fLRfrKcMn7rq7uzUn855UjtNQUpDlmoKSu9lY+SGtMQMENq
7AMvUmgZJe2Sw47o3N9mxqPa86HS9uGDFhnF7HOKxa/4uzoqqvvdget4BhP0h1xS
tRDXScnuZfPIs1nuA0w1obgzYb0FwOJhtB1m3rQ6iywAohwmM8mYe9jPREfIGaoy
U9p+DZEJHIC2YKy4G7hymbNbaKMgMG9IYl9axNyqbGaA9xPTPO4+pBBFvEXffLh6
UAk7p3XHV0ZIiKq1STIqDJpz6ucP88ywg9Hnkkrz2U82xuk/E43tBvIM9pxgl/bh
UhJcoL2Wlr5aHNHgIlBgWZ07Q+J0aQ==
=iM0A
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-09-05
1) Allover mlx5 cleanups
2) Added port congestion counters to ethtool stats:
Add 3 counters per priority to ethtool using PPCNT:
2.1) rx_prio[p]_buf_discard - the number of packets discarded by device
due to lack of per host receive buffers
2.2) rx_prio[p]_cong_discard - the number of packets discarded by device
due to per host congestion
2.3) rx_prio[p]_marked - the number of packets ECN marked by device due
to per host congestion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_diag_get_aux_size() can be called with sockets in any state.
icsk_ulp_ops is only present for full sockets.
For SYN_RECV or TIME_WAIT ones we would access garbage.
Fixes: 61723b3932 ("tcp: ulp: add functions to dump ulp-specific information")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Luke Hsiao <lukehsiao@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need for fib_notifier_ops to be in struct net. It is used only by
fib_notifier as a private data. Use net_generic to introduce per-net
fib_notifier struct and move fib_notifier_ops there.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add nft_reg_store64() and nft_reg_load64() helpers, from Ander Juaristi.
2) Time matching support, also from Ander Juaristi.
3) VLAN support for nfnetlink_log, from Michael Braun.
4) Support for set element deletions from the packet path, also from Ander.
5) Remove __read_mostly from conntrack spinlock, from Li RongQing.
6) Support for updating stateful objects, this also includes the initial
client for this infrastructure: the quota extension. A follow up fix
for the control plane also comes in this batch. Patches from
Fernando Fernandez Mancera.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-09-05
This series contains updates to ice driver.
Brett fixes the setting of num_q_vectors by using the maximum number
between the allocated transmit and receive queues.
Anirudh simplifies the code to use a helper function to return the main
VSI, which is the first element in the pf->vsi array. Adds a pointer
check to prevent a NULL pointer dereference. Adds a check to ensure we
do not initialize DCB on devices that are not DCB capable. Does some
housekeeping on the code to remove unnecessary indirection and reduce
the PF structure by removing elements that are not needed since the
values they were storing can be readily gotten from
ice_get_avail_*_count()'s. Updates the printed strings to make it
easier to search the logs for driver capabilities.
Jesse cleans up unnecessary function arguments. Updated the code to use
prefetch() to add some efficiency to the driver to avoid a cache miss.
Did some housekeeping on the code to remove the configurable transmit
work limit via ethtool which ended up creating performance overhead.
Made additional performance enhancements by updating the driver to start
out with a reasonable number of descriptors by changing the default to
2048.
Mitch fixes the reset logic for VFs by clearing VF_MBX_ARQLEN register
when the source of the reset is not PFR.
Lukasz updates the driver to include a similar fix for the i40e driver
by reporting link down for VF's when the PF queues are not enabled.
Akeem updates the driver to report the VF link status once we get VF
resources so that we can reflect the link status similarly to how the PF
reports link speed.
Ashish updates the transmit context structure based on recent changes to
the hardware specification.
Dave updates the DCB logic to allow a delayed registration for MIB
change events so that the driver is not accepting events before it is
ready for them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of patches for 5.4. Lots of changes for iwlwifi and mt76,
but also smaller changes to other drivers.
Major changes:
iwlwifi
* remove broken and unused runtime power management mode for PCIe
devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well
* support new ACPI value for per-platform antenna gain
* support for single antenna diversity
* support for new WoWLAN FW API
brcmfmac
* add reset debugfs file for testing firmware restart
mt76
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* Channel Switch Announcement (CSA) support for mt7615
* new device support for mt76x0
* support for more ciphers in mt7615
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
rtw88
* enable MSI interrupt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdc1+yAAoJEG4XJFUm622bd/UH+wUmM+7VaS+QZGQg3myyKGS6
eXVR1n/sT1L+0gnOUopooHGOjGAYPQZgMlC4r4oSd1PrmfJ+0yqhfjODNZyOSRU3
amYnBCesrvMohU9rd8iApxE83L+fr1P59gNfX/LsRxqdU9WmaAjX8nVUirc/w7iX
fGw7B4HqMchp+g73Svdy1Qk0d35laI6JexqeldPS8K0Qf4jwiwxM3kPL17W2Mznn
Osmcg+GHhy62Ov5yz71m0wAyxzcY4jMBtQuISn1vsKyZi17ndKgG2dPFXen29gDg
cRQshHx3UjIaR8XPJg7jmiomLrCNytFod+7IEO2Tz+iacFa6IRcKFOxzjtWTvzQ=
=lHhS
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2019-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.4
Second set of patches for 5.4. Lots of changes for iwlwifi and mt76,
but also smaller changes to other drivers.
Major changes:
iwlwifi
* remove broken and unused runtime power management mode for PCIe
devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well
* support new ACPI value for per-platform antenna gain
* support for single antenna diversity
* support for new WoWLAN FW API
brcmfmac
* add reset debugfs file for testing firmware restart
mt76
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* Channel Switch Announcement (CSA) support for mt7615
* new device support for mt76x0
* support for more ciphers in mt7615
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
rtw88
* enable MSI interrupt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove (broken) d0i3 support;
* Debug infrastructure work continues;
* Bump support FW API version to 50;
* Fix for the SN value in certain suspend/resume situations;
* Some work on new FW scan APIs;
* Work on LTR FW APIs;
* New FW channel-switch support;
* Support new ACPI value for per-platform antenna gain;
* Support for single antenna diversity;
* Support for new WoWLAN FW API;
* Initial refactoring of the device selection code;
* A bunch of clean-ups;
* Other small fixes and improvements;
-----BEGIN PGP SIGNATURE-----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=1L5G
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2019-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Patches intended for v5.4
* Remove (broken) d0i3 support;
* Debug infrastructure work continues;
* Bump support FW API version to 50;
* Fix for the SN value in certain suspend/resume situations;
* Some work on new FW scan APIs;
* Work on LTR FW APIs;
* New FW channel-switch support;
* Support new ACPI value for per-platform antenna gain;
* Support for single antenna diversity;
* Support for new WoWLAN FW API;
* Initial refactoring of the device selection code;
* A bunch of clean-ups;
* Other small fixes and improvements;
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable rx_process_result is being initialized with a value that
is never read and is being re-assigned immediately afterwards. The
assignment is redundant, so replace it with the return from function
lan743x_rx_process_packet.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
ravb: remove use of undocumented registers
this short series cleans up the RAVB driver a little.
The first patch corrects the spelling of the FBP field of SFO register.
This register field is unused and should have no run-time effect.
The remaining patches remove the use of undocumented registers
after some consultation with the internal Renesas BSP team.
Changes in v2:
* Corrected mangled state of first patch
* Patches 2/4 and 3/4 split out of a large patch
* Accumulated acks
* Tweaked changelog
* Claimed authorship of all patches
v1 of this series was tested on the following platforms.
No behaviour change is expected in v2.
* E3 Ebisu
* H3 Salvator-XS (ES2.0)
* M3-W Salvator-XS
* M3-N Salvator-XS
* RZ/G1C iW-RainboW-G23S
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Only use the TROCR register on R-Car Gen3 as it is not present on other
SoCs.
Offsets used for the undocumented registers are considered reserved and
should not be written to. After some internal investigation with Renesas it
remains unclear why this driver accesses these fields on R-Car Gen2 but
regardless of what the historical reasons are the current code is
considered incorrect.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the use of the undocumented BOC bit of the CCC register.
Current documentation for EtherAVB (ravb) describes the offset of what the
driver uses as the BOC bit as reserved and that only a value of 0 should be
written. After some internal investigation with Renesas it remains unclear
why this driver accesses these fields but regardless of what the historical
reasons are the current code is considered incorrect.
Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot