* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq, irq.h: Fix kernel-doc warnings
genirq: fix comment to say IRQ_WAKE_THREAD
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
perfcounter: Handle some IO return values
perf_counter: Push perf_sample_data through the swcounter code
perf_counter tools: Define and use our own u64, s64 etc. definitions
perf_counter: Close race in perf_lock_task_context()
perf_counter, x86: Improve interactions with fast-gup
perf_counter: Simplify and fix task migration counting
perf_counter tools: Add a data file header
perf_counter: Update userspace callchain sampling uses
perf_counter: Make callchain samples extensible
perf report: Filter to parent set by default
perf_counter tools: Handle lost events
perf_counter: Add event overlow handling
fs: Provide empty .set_page_dirty() aop for anon inodes
perf_counter: tools: Makefile tweaks for 64-bit powerpc
perf_counter: powerpc: Add processor back-end for MPC7450 family
perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
perf_counter: powerpc: Change how processor-specific back-ends get selected
perf_counter: powerpc: Use unsigned long for register and constraint values
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
perf_counter tools: Add and use isprint()
...
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix out of scope variable access in sched_slice()
sched: Hide runqueues from direct refer at source code level
sched: Remove unneeded __ref tag
sched, x86: Fix cpufreq + sched_clock() TSC scaling
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
Push the perf_sample_data further outwards to the swcounter interface,
to abstract it away some more.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prevent from further ftrace_start_up inbalances so that we avoid
future nop patching omissions with dynamic ftrace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Perfcounter reports the following stats for a wide system
profiling:
#
# (2364 samples)
#
# Overhead Symbol
# ........ ......
#
15.40% [k] mwait_idle_with_hints
8.29% [k] read_hpet
5.75% [k] ftrace_caller
3.60% [k] ftrace_call
[...]
This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.
The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.
This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.
Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.
This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
The bug is ancient.
If we trace the sub-thread of our natural child and this sub-thread exits,
we update parent->signal->cxxx fields. But we should not do this until
the whole thread-group exits, otherwise we account this thread (and all
other live threads) twice.
Add the task_detached() check. No need to check thread_group_empty(),
wait_consider_task()->delay_group_leader() already did this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perf_lock_task_context() is buggy because it can return a dead
context.
the RCU read lock in perf_lock_task_context() only guarantees
the memory won't get freed, it doesn't guarantee the object is
valid (in our case refcount > 0).
Therefore we can return a locked object that can get freed the
moment we release the rcu read lock.
perf_pin_task_context() then increases the refcount and does an
unlock on freed memory.
That increased refcount will cause a double free, in case it
started out with 0.
Ammend this by including the get_ctx() functionality in
perf_lock_task_context() (all users already did this later
anyway), and return a NULL context when the found one is
already dead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The task migrations counter was causing rare and hard to decypher
memory corruptions under load. After a day of debugging and bisection
we found that the problem was introduced with:
3f731ca: perf_counter: Fix cpu migration counter
Turning them off fixes the crashes. Incidentally, the whole
perf_counter_task_migration() logic can be done simpler as well,
by injecting a proper sw-counter event.
This cleanup also fixed the crashes. The precise failure mode is
not completely clear yet, but we are clearly not unhappy about
having a fix ;-)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.
An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.
This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.
There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.
This test detected the problem and pointed out where the issue was.
This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.
Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On x86_32, when optimize for size is set, gcc may align the frame pointer
and make a copy of the the return address inside the stack frame.
The return address that is located in the stack frame may not be
the one used to return to the calling function. This will break the
function graph tracer.
The function graph tracer replaces the return address with a jump to a hook
function that can trace the exit of the function. If it only replaces
a copy, then the hook will not be called when the function returns.
Worse yet, when the parent function returns, the function graph tracer
will return back to the location of the child function which will
easily crash the kernel with weird results.
To see the problem, when i386 is compiled with -Os we get:
c106be03: 57 push %edi
c106be04: 8d 7c 24 08 lea 0x8(%esp),%edi
c106be08: 83 e4 e0 and $0xffffffe0,%esp
c106be0b: ff 77 fc pushl 0xfffffffc(%edi)
c106be0e: 55 push %ebp
c106be0f: 89 e5 mov %esp,%ebp
c106be11: 57 push %edi
c106be12: 56 push %esi
c106be13: 53 push %ebx
c106be14: 81 ec 8c 00 00 00 sub $0x8c,%esp
c106be1a: e8 f5 57 fb ff call c1021614 <mcount>
When it is compiled with -O2 instead we get:
c10896f0: 55 push %ebp
c10896f1: 89 e5 mov %esp,%ebp
c10896f3: 83 ec 28 sub $0x28,%esp
c10896f6: 89 5d f4 mov %ebx,0xfffffff4(%ebp)
c10896f9: 89 75 f8 mov %esi,0xfffffff8(%ebp)
c10896fc: 89 7d fc mov %edi,0xfffffffc(%ebp)
c10896ff: e8 d0 08 fa ff call c1029fd4 <mcount>
The compile with -Os will align the stack pointer then set up the
frame pointer (%ebp), and it copies the return address back into
the stack frame. The change to the return address in mcount is done
to the copy and not the real place holder of the return address.
Then compile with -O2 sets up the frame pointer first, this makes
the change to the return address by mcount affect where the function
will jump on exit.
Reported-by: Jake Edge <jake@lwn.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enable gcov profiling of the entire kernel on x86_64. Required changes
include disabling profiling for:
* arch/kernel/acpi/realmode and arch/kernel/boot/compressed:
not linked to main kernel
* arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet:
profiling causes segfaults during boot (incompatible context)
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel. gcov may be useful for:
* debugging (has this code been reached at all?)
* test improvement (how do I change my test to cover these lines?)
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
The profiling patch incorporates the following changes:
* change kbuild to include profiling flags
* provide functions needed by profiling code
* present profiling data as files in debugfs
Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.
For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call constructors (gcc-generated initcall-like functions) during kernel
start and module load. Constructors are e.g. used for gcov data
initialization.
Disable constructor support for usermode Linux to prevent conflicts with
host glibc.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clone_nsproxy() does useless copying of old nsproxy -- every pointer will
be rewritten to new ns or to old ns. Remove copying, rename
clone_nsproxy(), create_nsproxy() will be used by C/R code to create fresh
nsproxy on restart.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
create_uts_ns() will be used by C/R to create fresh uts_ns.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
copy_pid_ns() is a perfect example of a case where unwinding leads to more
code and makes it less clear. Watch the diffstat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
create_pid_namespace() creates everything, but caller has to assign parent
pidns by hand, which is unnatural. At the moment of call new ->level has
to be taken from somewhere and parent pidns is already available.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_task_by_pid_type_ns is only used to implement find_task_by_vpid and
find_task_by_pid_ns, but both of them pass PIDTYPE_PID as first argument.
So just fold find_task_by_pid_type_ns into find_task_by_pid_ns and use
find_task_by_pid_ns to implement find_task_by_vpid.
While we're at it also remove the exports for find_task_by_pid_ns and
find_task_by_vpid - we don't have any modular callers left as the only
modular caller of he old pre pid namespace find_task_by_pid (gfs2) was
switched to pid_task which operates on a struct pid pointer instead of a
pid_t. Given the confusion about pid_t values vs namespace that's
generally the better option anyway and I think we're better of restricting
modules to do it that way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remoce the unused variable 'val' from __do_proc_dointvec()
The integer has been declared and used as 'val = -val' and there is no
reference to it anywhere.
Signed-off-by: Sukanto Ghosh <sukanto.cse.iitb@gmail.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Sukanto Ghosh <sukanto.cse.iitb@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that kthread_stop() can be used even if the task has already exited,
we can kill the "wait_to_die:" loop in migration_thread(). But we must
pin rq->migration_thread after creation.
Actually, I don't think CPU_UP_CANCELED or CPU_DEAD should wait for
->migration_thread exit. Perhaps we can simplify this code a bit more.
migration_call() can set ->should_stop and forget about this thread. But
we need a new helper in kthred.c for that.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on Eric's patch which in turn was based on my patch.
kthread_stop() has the nasty problems:
- it runs unpredictably long with the global semaphore held.
- it deadlocks if kthread itself does kthread_stop() before it obeys
the kthread_should_stop() request.
- it is not useable if kthread exits on its own, see for example the
ugly "wait_to_die:" hack in migration_thread()
- it is not possible to just tell kthread it should stop, we must always
wait for its exit.
With this patch kthread() allocates all neccesary data (struct kthread) on
its own stack, globals kthread_stop_xxx are deleted. ->vfork_done is used
as a pointer into "struct kthread", this means kthread_stop() can easily
wait for kthread's exit.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use two completions two create the kernel thread, this is a bit ugly.
kthread() wakes up create_kthread() via ->started, then create_kthread()
wakes up the caller kthread_create() via ->done. But kthread() does not
need to wait for kthread(), it can just return. Instead kthread() itself
can wake up the caller of kthread_create().
Kill kthread_create_info->started, ->done is enough. This improves the
scalability a bit and sijmplifies the code.
The only problem if kernel_thread() fails, in that case create_kthread()
must do complete(&create->done).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_wait:
current->state = TASK_INTERRUPTIBLE;
read_lock(&tasklist_lock);
... search for the task to reap ...
In theory, the ->state changing can leak into the critical section. Since
the child can change its status under read_lock(tasklist) in parallel
(finish_stop/ptrace_stop), we can miss the wakeup if __wake_up_parent()
sees us in TASK_RUNNING state. Add the barrier.
Also, use __set_current_state() to set TASK_RUNNING.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_wait() does BUG_ON(tsk->signal != current->signal), this looks like a
raher obsolete check. At least, I don't think do_wait() is the best place
to verify that all threads have the same ->signal. Remove it.
Also, change the code to use while_each_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we don't pass &retval down to other helpers we can simplify
the code more.
- kill tsk_result, just use retval
- add the "notask" label right after the main loop, and
s/got end/goto notask/ after the fastpath pid check.
This way we don't need to initialize retval before this
check and the code becomes a bit more clean, if this pid
has no attached tasks we should just skip the list search.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce "struct wait_opts" which holds the parameters for misc helpers
in do_wait() pathes.
This adds 13 lines to kernel/exit.c, but saves 256 bytes from .o and imho
makes the code much more readable.
This patch temporary uglifies rusage/siginfo code a little bit, will be
addressed by further cleanups.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional changes, preparation for the next patch.
ptrace_do_wait() adds WUNTRACED to options for wait_task_stopped() which
should always accept the stopped tracee, even if do_wait() was called
without WUNTRACED.
Change wait_task_stopped() to check "ptrace || WUNTRACED" instead. This
makes the code more explicit, and "int options" argument becomes const in
do_wait() pathes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The forked child can have TIF_SIGPENDING if it was copied from parent's
ti->flags. But this is harmless and actually almost never happens,
because copy_process() can't succeed if signal_pending() == T.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no reason for thread_group_cputime() in wait_task_zombie(), there
must be no other threads.
This call was previously needed to collect the per-cpu data which we do
not have any longer.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change ptrace_getsiginfo/ptrace_setsiginfo to use lock_task_sighand()
without tasklist_lock. Perhaps it makes sense to make a single helper
with "bool rw" argument.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the non-traced sub-thread calls do_notify_parent_cldstop(), we send the
notification to group_leader->real_parent and we report group_leader's
pid.
But, if group_leader is traced we use the wrong ->parent->nsproxy->pid_ns,
the tracer and parent can live in different namespaces. Change the code
to use "parent" instead of tsk->parent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change wait_task_zombie() to use ->real_parent instead of ->parent. We
could even use current afaics, but ->real_parent is more clean.
We know that the child is not ptrace_reparented() and thus they are equal.
But we should avoid using task_struct->parent, we are going to remove it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use rcu_read_lock() instead of tasklist_lock to find/get the task
in ptrace_get_task_struct().
- Make it static, it has no callers outside of ptrace.c.
- The comment doesn't match the reality, this helper does not do
any checks. Beacuse it is really trivial and static I removed the
whole comment.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the "Nasty, nasty" lock dance in ptrace_attach()/ptrace_traceme() -
from now task_lock() has nothing to do with ptrace at all.
With the recent changes nobody uses task_lock() to serialize with ptrace,
but in fact it was never needed and it was never used consistently.
However ptrace_attach() calls __ptrace_may_access() and needs task_lock()
to pin task->mm for get_dumpable(). But we can call __ptrace_may_access()
before we take tasklist_lock, ->cred_exec_mutex protects us against
do_execve() path which can change creds and MMF_DUMP* flags.
(ugly, but we can't use ptrace_may_access() because it hides the error
code, so we have to take task_lock() and use __ptrace_may_access()).
NOTE: this change assumes that LSM hooks, security_ptrace_may_access() and
security_ptrace_traceme(), can be called without task_lock() held.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ptrace_attach() and ptrace_traceme() are the last functions which look as
if the untraced task can have task->ptrace != 0, this must not be
possible. Change the code to just check ->ptrace != 0 and s/|=/=/ to set
PT_PTRACED.
Also, a couple of trivial whitespace cleanups in ptrace_attach().
And move ptrace_traceme() up near ptrace_attach() to keep them close to
each other.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add PF_KTHREAD check to prevent attaching to the kernel thread
with a borrowed ->mm.
With or without this change we can race with daemonize() which
can set PF_KTHREAD or clear ->mm after ptrace_attach() does the
check, but this doesn't matter because reparent_to_kthreadd()
does ptrace_unlink().
- Kill "!task->mm" check. We don't really care about ->mm != NULL,
and the task can call exit_mm() right after we drop task_lock().
What we need is to make sure we can't attach after exit_notify(),
check task->exit_state != 0 instead.
Also, move the "already traced" check down for cosmetic reasons.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional changes.
- Nobody except ptrace.c & co should use ptrace flags directly, we have
task_ptrace() for that.
- No need to specially check PT_PTRACED, we must not have other PT_ bits
set without PT_PTRACED. And no need to know this flag exists.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"Search in the siblings" should use ->real_parent, not ->parent. If the
task is traced then ->parent == tracer, while the task's parent is always
->real_parent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
allow_signal() checks ->mm == NULL. Not sure why. Perhaps to make sure
current is the kernel thread. But this helper must not be used unless we
are the kernel thread, kill this check.
Also, document the fact that the CLONE_SIGHAND kthread must not use
allow_signal(), unless the caller really wants to change the parent's
->sighand->action as well.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't have an interface to reset mem.limit or memsw.limit now.
This patch allows to reset mem.limit or memsw.limit when they are being
set to -1.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'noprefix' option was introduced for backwards-compatibility of
cpuset, but actually it can be used when mounting other subsystems.
This results in possibility of name collision, and now the collision can
really happen, because we have 'stat' file in both memory and cpuacct
subsystem:
# mount -t cgroup -o noprefix,memory,cpuacct xxx /mnt
Cgroup will happily mount the 2 subsystems, but only 'stat' file of memory
subsys can be seen.
We don't want users to use nopreifx, and also want to avoid name
collision, so we change to allow noprefix only if mounting just the cpuset
subsystem.
[akpm@linux-foundation.org: fix shift for cpuset_subsys_id >= 32]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Statistics for softirq doesn't exist.
It will be helpful like statistics for interrupts.
This patch introduces counting the number of softirq,
which will be exported in /proc/softirqs.
When softirq handler consumes much CPU time,
/proc/stat is like the following.
$ while :; do cat /proc/stat | head -n1 ; sleep 10 ; done
cpu 88 0 408 739665 583 28 2 0 0
cpu 450 0 1090 740970 594 28 1294 0 0
^^^^
softirq
In such a situation,
/proc/softirqs shows us which softirq handler is invoked.
We can see the increase rate of softirqs.
<before>
$ cat /proc/softirqs
CPU0 CPU1 CPU2 CPU3
HI 0 0 0 0
TIMER 462850 462805 462782 462718
NET_TX 0 0 0 365
NET_RX 2472 2 2 40
BLOCK 0 0 381 1164
TASKLET 0 0 0 224
SCHED 462654 462689 462698 462427
RCU 3046 2423 3367 3173
<after>
$ cat /proc/softirqs
CPU0 CPU1 CPU2 CPU3
HI 0 0 0 0
TIMER 463361 465077 465056 464991
NET_TX 53 0 1 365
NET_RX 3757 2 2 40
BLOCK 0 0 398 1170
TASKLET 0 0 0 224
SCHED 463074 464318 464612 463330
RCU 3505 2948 3947 3673
When CPU TIME of softirq is high,
the rates of increase is the following.
TIMER : 220/sec : CPU1-3
NET_TX : 5/sec : CPU0
NET_RX : 120/sec : CPU0
SCHED : 40-200/sec : all CPU
RCU : 45-58/sec : all CPU
The rates of increase in an idle mode is the following.
TIMER : 250/sec
SCHED : 250/sec
RCU : 2/sec
It seems many softirqs for receiving packets and rcu are invoked. This
gives us help for checking system.
Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Reviewed-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alternative method of mmap() data output handling that provides
better overflow management and a more reliable data stream.
Unlike the previous method, that didn't have any user->kernel
feedback and relied on userspace keeping up, this method relies on
userspace writing its last read position into the control page.
It will ensure new output doesn't overwrite not-yet read events,
new events for which there is no space left are lost and the
overflow counter is incremented, providing exact event loss
numbers.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the output of the ring buffer benchmark/test prints to
the console. This test runs for ten seconds every ten seconds and
ouputs the result after every iteration. This needlessly fills up
the logs.
This patch makes the ring buffer benchmark/test print to the ftrace
buffer using trace_printk. To view the test results, you must examine
the debug/tracing/trace file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it
will need to read from the ring buffer. But the read side of the
ring buffer still takes locks. This patch adds a check on the read
side that if it is in an NMI, then it will disable the ring buffer
and not take any locks.
Reads can still happen on a disabled ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The checking of whether the buffer is empty or not needs to be serialized
among the readers. Add the reader spin lock around it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer must have at least two pages allocated for the
reader page swap to work.
The page count check will miss the case of a zero size passed in.
Even though a zero size ring buffer would probably fail an allocation,
making the min size check for less than two instead of equal to one makes
the code a bit more robust.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original version of the ring buffer had a hack to map the
page struct that held the pages of the buffer to also be the structure
that the ring buffer would keep the pages in a link list.
This overlap of the page struct was very dangerous and that hack was
removed a while ago.
But there was a check to make sure the buffer_page never became bigger
than the page struct, and would fail the compile if it did. The
check was only meaningful when we had the hack. Now that we have separate
allocated descriptors for the buffer pages, we can remove this check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: start using hrtimers
hrtimer: export ktime_add_safe
UBIFS: do not forget to register BDI device
UBIFS: allow sync option in rootflags
UBIFS: remove dead code
UBIFS: use anonymous device
UBIFS: return proper error code if the compr is not present
UBIFS: return error if link and unlink race
UBIFS: reset no_space flag after inode deletion
Access to local variable lw is aliased by usage of pointer load.
Access to pointer load in calc_delta_mine() happens when lw is
already out of scope.
[ Reported by static code analysis. ]
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
LKML-Reference: <20090616103512.0c846e51@frequentis.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are some points which refer the per-cpu value "runqueues" directly.
sched.c provides nice abstraction, such as cpu_rq() and this_rq(),
so we should use these macros when looking runqueues.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <20090617.222055.374768827975756908.mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Those two functions no longer call alloc_bootmmem_cpumask_var(),
so no need to tag them with __init_refok.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4A35DD5B.9050106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* akpm: (182 commits)
fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
fbdev: *bfin*: fix __dev{init,exit} markings
fbdev: *bfin*: drop unnecessary calls to memset
fbdev: bfin-t350mcqb-fb: drop unused local variables
fbdev: blackfin has __raw I/O accessors, so use them in fb.h
fbdev: s1d13xxxfb: add accelerated bitblt functions
tcx: use standard fields for framebuffer physical address and length
fbdev: add support for handoff from firmware to hw framebuffers
intelfb: fix a bug when changing video timing
fbdev: use framebuffer_release() for freeing fb_info structures
radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
s3c-fb: CPUFREQ frequency scaling support
s3c-fb: fix resource releasing on error during probing
carminefb: fix possible access beyond end of carmine_modedb[]
acornfb: remove fb_mmap function
mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
mb862xxfb: restrict compliation of platform driver to PPC
Samsung SoC Framebuffer driver: add Alpha Channel support
atmel-lcdc: fix pixclock upper bound detection
offb: use framebuffer_alloc() to allocate fb_info struct
...
Manually fix up conflicts due to kmemcheck in mm/slab.c
Round the slow work queue's cull and OOM timeouts to whole second boundary
with round_jiffies(). The slow work queue uses a pair of timers to cull
idle threads and, after OOM, to delay new thread creation.
This patch also extracts the mod_timer() logic for the cull timer into a
separate helper function.
By rounding non-time-critical timers such as these to whole seconds, they
will be batched up to fire at the same time rather than being spread out.
This allows the CPU wake up less, which saves power.
Signed-off-by: Chris Peterson <cpeterso@cpeterso.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move supplementary groups implementation to kernel/groups.c .
kernel/sys.c already accumulated quite a few random stuff.
Do strictly copy/paste + add required headers to compile. Compile-tested
on many configs and archs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the following scenario appears to be possible in theory:
* Tasks are frozen for hibernation or suspend.
* Free pages are almost exhausted.
* Certain piece of code in the suspend code path attempts to allocate
some memory using GFP_KERNEL and allocation order less than or
equal to PAGE_ALLOC_COSTLY_ORDER.
* __alloc_pages_internal() cannot find a free page so it invokes the
OOM killer.
* The OOM killer attempts to kill a task, but the task is frozen, so
it doesn't die immediately.
* __alloc_pages_internal() jumps to 'restart', unsuccessfully tries
to find a free page and invokes the OOM killer.
* No progress can be made.
Although it is now hard to trigger during hibernation due to the memory
shrinking carried out by the hibernation code, it is theoretically
possible to trigger during suspend after the memory shrinking has been
removed from that code path. Moreover, since memory allocations are
going to be used for the hibernation memory shrinking, it will be even
more likely to happen during hibernation.
To prevent it from happening, introduce the oom_killer_disabled switch
that will cause __alloc_pages_internal() to fail in the situations in
which the OOM killer would have been called and make the freezer set
this switch after tasks have been successfully frozen.
[akpm@linux-foundation.org: be nicer to the namespace]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Callers of alloc_pages_node() can optionally specify -1 as a node to mean
"allocate from the current node". However, a number of the callers in
fast paths know for a fact their node is valid. To avoid a comparison and
branch, this patch adds alloc_pages_exact_node() that only checks the nid
with VM_BUG_ON(). Callers that know their node is valid are then
converted.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org> [for the SLOB NUMA bits]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix allocating page cache/slab object on the unallowed node when memory
spread is set by updating tasks' mems_allowed after its cpuset's mems is
changed.
In order to update tasks' mems_allowed in time, we must modify the code of
memory policy. Because the memory policy is applied in the process's
context originally. After applying this patch, one task directly
manipulates anothers mems_allowed, and we use alloc_lock in the
task_struct to protect mems_allowed and memory policy of the task.
But in the fast path, we didn't use lock to protect them, because adding a
lock may lead to performance regression. But if we don't add a lock,the
task might see no nodes when changing cpuset's mems_allowed to some
non-overlapping set. In order to avoid it, we set all new allowed nodes,
then clear newly disallowed ones.
[lee.schermerhorn@hp.com:
The rework of mpol_new() to extract the adjusting of the node mask to
apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind()
with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local
allocation. Fix this by adding the check for MPOL_PREFERRED and empty
node mask to mpol_new_mpolicy().
Remove the now unneeded 'nodes = NULL' from mpol_new().
Note that mpol_new_mempolicy() is always called with a non-NULL
'nodes' parameter now that it has been removed from mpol_new().
Therefore, we don't need to test nodes for NULL before testing it for
'empty'. However, just to be extra paranoid, add a VM_BUG_ON() to
verify this assumption.]
[lee.schermerhorn@hp.com:
I don't think the function name 'mpol_new_mempolicy' is descriptive
enough to differentiate it from mpol_new().
This function applies cpuset set context, usually constraining nodes
to those allowed by the cpuset. However, when the 'RELATIVE_NODES flag
is set, it also translates the nodes. So I settled on
'mpol_set_nodemask()', because the comment block for mpol_new() mentions
that we need to call this function to "set nodes".
Some additional minor line length, whitespace and typo cleanup.]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the bug that the kernel didn't spread page cache/slab object evenly
over all the allowed nodes when spread flags were set by updating tasks'
page/slab spread flags in time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel still allocates the page caches on old node after modifying its
cpuset's mems when 'memory_spread_page' was set, or it didn't spread the
page cache evenly over all the nodes that faulting task is allowed to usr
after memory_spread_page was set. it is caused by the old mem_allowed and
flags of the task, the current kernel doesn't updates them unless some
function invokes cpuset_update_task_memory_state(), it is too late
sometimes.We must update the mem_allowed and the flags of the tasks in
time.
Slab has the same problem.
The following patches fix this bug by updating tasks' mem_allowed and
spread flag after its cpuset's mems or spread flag is changed.
This patch:
Extract a function from cpuset_update_task_memory_state(). It will be
used later for update tasks' page/slab spread flags after its cpuset's
flag is set
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A check if "write > BUF_PAGE_SIZE" is done right after a
if (write > BUF_PAGE_SIZE)
return ...;
Thus the check is actually testing the compiler and not the
kernel. This is useless, remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The index of the event is found by masking PAGE_MASK to it and
subtracting the header size. Currently the header size is calculate
by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro
BUF_PAGE_HDR_SIZE to define it.
If we want to change BUF_PAGE_SIZE to something less than filling
the rest of the page (this is done for debugging), then we break
the algorithm to find the index.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Module unload is protected by event_mutex, while setting filter is
protected by filter_mutex. This leads to the race:
echo 'bar == 0 || bar == 10' \ |
> sample/filter |
| insmod sample.ko
add_pred("bar == 0") |
-> n_preds == 1 |
add_pred("bar == 100") |
-> n_preds == 2 |
| rmmod sample.ko
| insmod sample.ko
add_pred("&&") |
-> n_preds == 1 (should be 3) |
Now event->filter->preds is corrupted. An then when filter_match_preds()
is called, the WARN_ON() in it will be triggered.
To avoid the race, we remove filter_mutex, and replace it with event_mutex.
[ Impact: prevent corruption of filters by module removing and loading ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A4D.6000205@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer is made up of three sets of pointers.
The head page pointer, which points to the next page for the reader to
get.
The commit pointer and commit index, which points to the page and index
of the last committed write respectively.
The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).
The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.
The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.
The outer writer would not realized the commit moved forward and the
accounting will break.
This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.
The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.
This change not only solves the mentioned race, but also makes the
code simpler.
[ Impact: fix commit race and simplify code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the compiler error:
kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
debugfs: use specified mode to possibly mark files read/write only
debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
xen: remove driver_data direct access of struct device from more drivers
usb: gadget: at91_udc: remove driver_data direct access of struct device
uml: remove driver_data direct access of struct device
block/ps3: remove driver_data direct access of struct device
s390: remove driver_data direct access of struct device
parport: remove driver_data direct access of struct device
parisc: remove driver_data direct access of struct device
of_serial: remove driver_data direct access of struct device
mips: remove driver_data direct access of struct device
ipmi: remove driver_data direct access of struct device
infiniband: ehca: remove driver_data direct access of struct device
ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
hvcs: remove driver_data direct access of struct device
xen block: remove driver_data direct access of struct device
thermal: remove driver_data direct access of struct device
scsi: remove driver_data direct access of struct device
pcmcia: remove driver_data direct access of struct device
PCIE: remove driver_data direct access of struct device
...
Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
Several WARN_ON() messages omit the '\n' at the end of the string, which
is a simple (and understandable) error. The next line printed after
that warning line is usually the current module list, and that printk
does not have a log-level marker - resulting in one long mixed-up line.
Adding this loglevel marker will now avoid this unreadable mess.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a KERN_DEFAULT loglevel marker, for when you cannot decide
which loglevel you want, and just want to keep an existing printk
with the default loglevel.
The difference between having KERN_DEFAULT and having no log-level
marker at all is two-fold:
- having the log-level marker will now force a new-line if the
previous printout had not added one (perhaps because it forgot,
but perhaps because it expected a continuation)
- having a log-level marker is required if you are printing out a
message that otherwise itself could perhaps otherwise be mistaken
for a log-level.
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
It used to be that we would only look at the log-level in a printk()
after explicit newlines, which can cause annoying problems when the
previous printk() did not end with a '\n'. In that case, the log-level
marker would be just printed out in the middle of the line, and be
seen as just noise rather than change the logging level.
This changes things to always look at the log-level in the first
bytes of the printout. If a log level marker is found, it is always
used as the log-level. Additionally, if no newline existed, one is
added (unless the log-level is the explicit KERN_CONT marker, to
explicitly show that it's a continuation of a previous line).
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the addition of commit:
c7b0930857
ring-buffer: prevent adding write in discarded area
The ring buffer may now add discarded events when a write passes
the end of a buffer page. Before, a discarded event was only added
when the tracer deliberately created one. The ring buffer benchmark
test does not handle discarded events when it reads the buffer and
fails when it encounters one.
Also fix the increment for large data entries (luckily, the test did
not add any yet).
[ Impact: fix false failure of ring buffer self test ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.
And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.
debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/
Fix inconsistency of directory name to mount debugfs filesystem.
* From Steven Rostedt
- find_debugfs() and tracing_files() in this patch.
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During bootup performance tracing we see repeated occurrences of
/sys/kernel/uid/* events for the same uid, leading to a,
in this case, rather pointless userspace processing for the
same uid over and over.
This is usually caused by tools which change their uid to "nobody",
to run without privileges to read data supplied by untrusted users.
This change delays the execution of the (already existing) scheduled
work, to cleanup the uid after one second, so the allocated and announced
uid can possibly be re-used by another process.
This is the current behavior, where almost every invocation of a
binary, which changes the uid, creates two events:
$ read START < /sys/kernel/uevent_seqnum; \
for i in `seq 100`; do su --shell=/bin/true bin; done; \
read END < /sys/kernel/uevent_seqnum; \
echo $(($END - $START))
178
With the delayed cleanup, we get only two events, and userspace finishes
a bit faster too:
$ read START < /sys/kernel/uevent_seqnum; \
for i in `seq 100`; do su --shell=/bin/true bin; done; \
read END < /sys/kernel/uevent_seqnum; \
echo $(($END - $START))
1
Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
* 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevent: export register_device and delta2ns
clockevents: tick_broadcast_device can become static
* 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: prevent selection of low resolution clocksourse also for nohz=on
clocksource: sanity check sysfs clocksource changes
This a very tight race where an interrupt could come in and not
have enough data to put into the end of a buffer page, and that
it would fail to write and need to go to the next page.
But if this happened when another writer was about to reserver
their data, and that writer has smaller data to reserve, then
it could succeed even though the interrupt moved the tail page.
To pervent that, if we fail to store data, and by subtracting the
amount we reserved we still have room for smaller data, we need
to fill that space with "discarded" data.
[ Impact: prevent race were buffer data may be lost ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I forgot to update filter code accordingly in
"tracing/events: change the type of __str_loc_item to unsigned short"
(commt b0aae68cc5)
It can cause system crash:
# echo 1 > tracing/events/irq/irq_handler_entry/enable
# echo 'name == eth0' > tracing/events/irq/irq_handler_entry/filter
[ Impact: fix crash while filtering on __string() field ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B905.3090500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Atomic allocation is not needed here.
[ Impact: clean up of memory alloction type ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B898.2050607@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's tracing_cpumask_new that should be kfree()ed.
This causes tracing_cpumask to be freed due to the typo:
# echo z > tracing_cpumask
bash: echo: write error: Invalid argument
And subsequent reads/writes to tracing_cpuamsk will access this
already-freed tracing_cpumask, thus may lead to crash.
[ Impact: fix leak and crash when writing invalid val to tracing_cpumask ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B86A.7070608@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simon triggered a lockdep inversion report about us taking ctx->mutex
vs counter->mutex in inverse orders. Fix that up.
Reported-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This false positive is due to field padding in struct sigqueue. When
this dynamically allocated structure is copied to the stack (in arch-
specific delivery code), kmemcheck sees a read from the padding, which
is, naturally, uninitialized.
Hide the false positive using the __GFP_NOTRACK_FALSE_POSITIVE flag.
Also made the rlimit override code a bit clearer by introducing a new
variable.
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
This gets rid of a heap of false-positive warnings from the tracer
code due to the use of bitfields.
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
With kmemcheck enabled, the slab allocator needs to do this:
1. Tell kmemcheck to allocate the shadow memory which stores the status of
each byte in the allocation proper, e.g. whether it is initialized or
uninitialized.
2. Tell kmemcheck which parts of memory that should be marked uninitialized.
There are actually a few more states, such as "not yet allocated" and
"recently freed".
If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
memory that can take page faults because of kmemcheck.
If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
request memory with the __GFP_NOTRACK flag. This does not prevent the page
faults from occuring, however, but marks the object in question as being
initialized so that no warnings will ever be produced for this object.
In addition to (and in contrast to) __GFP_NOTRACK, the
__GFP_NOTRACK_FALSE_POSITIVE flag indicates that the allocation should
not be tracked _because_ it would produce a false positive. Their values
are identical, but need not be so in the future (for example, we could now
enable/disable false positives with a config option).
Parts of this patch were contributed by Pekka Enberg but merged for
atomicity.
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
.gitignore: ignore *.lzma files
kbuild: add generic --set-str option to scripts/config
kbuild: simplify argument loop in scripts/config
kbuild: handle non-existing options in scripts/config
kallsyms: generalize text region handling
kallsyms: support kernel symbols in Blackfin on-chip memory
documentation: make version fix
kbuild: fix a compile warning
gitignore: Add GNU GLOBAL files to top .gitignore
kbuild: fix delay in setlocalversion on readonly source
README: fix misleading pointer to the defconf directory
vmlinux.lds.h update
kernel-doc: cleanup perl script
Improve vmlinux.lds.h support for arch specific linker scripts
kbuild: fix headers_exports with boolean expression
kbuild/headers_check: refine extern check
kbuild: fix "Argument list too long" error for "make headers_check",
ignore *.patch files
Remove bashisms from scripts
menu: fix embedded menu presentation
...
General description: kmemcheck is a patch to the linux kernel that
detects use of uninitialized memory. It does this by trapping every
read and write to memory that was allocated dynamically (e.g. using
kmalloc()). If a memory address is read that has not previously been
written to, a message is printed to the kernel log.
Thanks to Andi Kleen for the set_memory_4k() solution.
Andrew Morton suggested documenting the shadow member of struct page.
Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
[export kmemcheck_mark_initialized]
[build fix for setup_max_cpus]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
With PERF_FORMAT_ID, perf_read_hw now needs space for up to 4 values.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using atomic_set on an atomic64_t variable gives a compiler
warning on powerpc, and won't give the desired result at runtime.
This fixes an instance of this error in the perf_counter code.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18995.20490.979429.244883@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
commit 3f68535ada (clocksource: sanity check sysfs clocksource
changes) prevents selection of non high resolution capable
clocksources when high resolution mode is active, but did not take
into account that the same rules apply for highres=off nohz=on.
Check the tick device mode instead of hrtimer_hres_active() to verify
whether the system needs to be protected from a switch to jiffies or
other non highres capable clock sources.
Reported-by: Luming Yu <luming.yu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rationale: kmemcheck needs to be able to schedule a tasklet without
touching any dynamically allocated memory _at_ _all_ (since that would
lead to a recursive page fault). This tasklet is used for writing the
error reports to the kernel log.
The new scheduling function avoids touching any other tasklets by
inserting the new tasklist as the head of the "tasklet_hi" list instead
of on the tail.
Also don't wake up the softirq thread lest the scheduler access some
tracked memory and we go down with a recursive page fault.
In this case, we'd better just wait for the maximum time of 1/HZ for the
message to appear.
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
perf_counter: Add forward/backward attribute ABI compatibility
perf record: Explicity program a default counter
perf_counter: Remove PERF_TYPE_RAW special casing
perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too
powerpc, perf_counter: Fix performance counter event types
perf_counter/x86: Add a quirk for Atom processors
perf_counter tools: Remove one L1-data alias
The *_nvs_* routines in swsusp.c make use of the io*map()
functions, which are only provided for HAS_IOMEM, thus
breaking compilation if HAS_IOMEM is not set. Fix this
by moving the *_nvs_* routines into hibernate_nvs.c, which
is only compiled if HAS_IOMEM is set.
[rjw: Change the name of the new file to hibernate_nvs.c, add the
license line to the header comment.]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Change the name of kernel/power/disk.c to kernel/power/hibernate.c
in analogy with the file names introduced by the changes that
separated the suspend to RAM and standby funtionality from the
common PM functions.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Move the suspend to RAM and standby code from kernel/power/main.c
to two separate files, kernel/power/suspend.c containing the basic
functions and kernel/power/suspend_test.c containing the automatic
suspend test facility based on the RTC clock alarm.
There are no changes in functionality related to these modifications.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
A future patch is going to modify the memory shrinking code so that
it will make memory allocations to free memory instead of using an
artificial memory shrinking mechanism for that. For this purpose it
is convenient to move swsusp_shrink_memory() from
kernel/power/swsusp.c to kernel/power/snapshot.c, because the new
memory-shrinking code is going to use things that are local to
kernel/power/snapshot.c .
[rev. 2: Make some functions static and remove their headers from
kernel/power/power.h]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Remove the shrinking of memory from the suspend-to-RAM code, where
it is not really necessary.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
This patch (as1241) renames a bunch of functions in the PM core.
Rather than go through a boring list of name changes, suffice it to
say that in the end we have a bunch of pairs of functions:
device_resume_noirq dpm_resume_noirq
device_resume dpm_resume
device_complete dpm_complete
device_suspend_noirq dpm_suspend_noirq
device_suspend dpm_suspend
device_prepare dpm_prepare
in which device_X does the X operation on a single device and dpm_X
invokes device_X for all devices in the dpm_list.
In addition, the old dpm_power_up and device_resume_noirq have been
combined into a single function (dpm_resume_noirq).
Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions
of the former top-level device_suspend and device_resume routines.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rename the functions performing "_noirq" dev_pm_ops
operations from device_power_down() and device_power_up()
to device_suspend_noirq() and device_resume_noirq().
The new function names are chosen to show that the functions
are responsible for calling the _noirq() versions to finalize
the suspend/resume operation. The current function names do
not perform power down/up anymore so the names may be misleading.
Global function renames:
- device_power_down() -> device_suspend_noirq()
- device_power_up() -> device_resume_noirq()
Static function renames:
- suspend_device_noirq() -> __device_suspend_noirq()
- resume_device_noirq() -> __device_resume_noirq()
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* 'topic/slab/earlyboot-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slab: setup cpu caches later on when interrupts are enabled
slab,slub: don't enable interrupts during early boot
slab: fix gfp flag in setup_cpu_cache()
x86: make zap_low_mapping could be used early
irq: slab alloc for default irq_affinity
memcg: fix page_cgroup fatal error in FLATMEM
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits)
lguest: add support for indirect ring entries
lguest: suppress notifications in example Launcher
lguest: try to batch interrupts on network receive
lguest: avoid sending interrupts to Guest when no activity occurs.
lguest: implement deferred interrupts in example Launcher
lguest: remove obsolete LHREQ_BREAK call
lguest: have example Launcher service all devices in separate threads
lguest: use eventfds for device notification
eventfd: export eventfd_signal and eventfd_fget for lguest
lguest: allow any process to send interrupts
lguest: PAE fixes
lguest: PAE support
lguest: Add support for kvm_hypercall4()
lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD
lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated
lguest: map switcher with executable page table entries
lguest: fix writev returning short on console output
lguest: clean up length-used value in example launcher
lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.
lguest: beyond ARRAY_SIZE of cpu->arch.gdt
...
lguest needs kick_process: wake_up_process() does nothing if a process
is running, which isn't sufficient (we need it in the kernel).
And lguest support is usually modular.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Provide for means of extending the perf_counter_attr in a 'natural' way.
We allow growing the structure by appending fields at the end by specifying
the full structure size inside it.
When a new kernel sees a smaller (old) structure, it will 0 pad the tail.
When an old kernel sees a larger (new) structure, it will verify the tail
consists of 0s, otherwise fail.
If we fail due to a size-mismatch, we return -E2BIG and write the kernel's
native attribe size back into the provided structure.
Furthermore, add some attribute verification, so that we'll fail counter
creation when unknown bits are present (PERF_SAMPLE, PERF_FORMAT, or in
the __reserved fields).
(This ABI detail is introduced while keeping the existing syscall ABI.)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The PERF_TYPE_RAW special case seems superfluous these days. Remove
it and add it to the switch() stmt like the others.
[ Impact: cleanup ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's theoretically possible that there are exception table entries
which point into the (freed) init text of modules. These could cause
future problems if other modules get loaded into that memory and cause
an exception as we'd see the wrong fixup. The only case I know of is
kvm-intel.ko (when CONFIG_CC_OPTIMIZE_FOR_SIZE=n).
Amerigo fixed this long-standing FIXME in the x86 version, but this
patch is more general.
This implements trim_init_extable(); most archs are simple since they
use the standard lib/extable.c sort code. Alpha and IA64 use relative
addresses in their fixups, so thier trimming is a slight variation.
Sparc32 is unique; it doesn't seem to define ARCH_HAS_SORT_EXTABLE,
yet it defines its own sort_extable() which overrides the one in lib.
It doesn't sort, so we have to mark deleted entries instead of
actually trimming them.
Inspired-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-alpha@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Impact: API cleanup
For historical reasons, 'bool' parameters must be an int, not a bool.
But there are around 600 users, so a conversion seems like useless churn.
So we use __same_type() to distinguish, and handle both cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: cleanup
Rather than hack KPARAM_KMALLOCED into the perm field, separate it out.
Since the perm field was 32 bits and only needs 16, we don't add bloat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It takes an 'int' for historical reasons, and there are only two
users: simply switch it over to bool.
The other user (uvesafb.c) will get a (harmless-on-x86) warning until
the next patch is applied.
Cc: Brad Douglas <brad@neruo.com>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'for-linus' of git://linux-arm.org/linux-2.6:
kmemleak: Add the corresponding MAINTAINERS entry
kmemleak: Simple testing module for kmemleak
kmemleak: Enable the building of the memory leak detector
kmemleak: Remove some of the kmemleak false positives
kmemleak: Add modules support
kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
kmemleak: Add the vmalloc memory allocation/freeing hooks
kmemleak: Add the slub memory allocation/freeing hooks
kmemleak: Add the slob memory allocation/freeing hooks
kmemleak: Add the slab memory allocation/freeing hooks
kmemleak: Add documentation on the memory leak detector
kmemleak: Add the base support
Manual conflict resolution (with the slab/earlyboot changes) in:
drivers/char/vt.c
init/main.c
mm/slab.c
* 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits)
perf_counter: Turn off by default
perf_counter: Add counter->id to the throttle event
perf_counter: Better align code
perf_counter: Rename L2 to LL cache
perf_counter: Standardize event names
perf_counter: Rename enums
perf_counter tools: Clean up u64 usage
perf_counter: Rename perf_counter_limit sysctl
perf_counter: More paranoia settings
perf_counter: powerpc: Implement generalized cache events for POWER processors
perf_counters: powerpc: Add support for POWER7 processors
perf_counter: Accurate period data
perf_counter: Introduce struct for sample data
perf_counter tools: Normalize data using per sample period data
perf_counter: Annotate exit ctx recursion
perf_counter tools: Propagate signals properly
perf_counter tools: Small frequency related fixes
perf_counter: More aggressive frequency adjustment
perf_counter/x86: Fix the model number of Intel Core2 processors
perf_counter, x86: Correct some event and umask values for Intel processors
...
* 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
vgacon: use slab allocator instead of the bootmem allocator
irq: use kcalloc() instead of the bootmem allocator
sched: use slab in cpupri_init()
sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()
memcg: don't use bootmem allocator in setup code
irq/cpumask: make memoryless node zero happy
x86: remove some alloc_bootmem_cpumask_var calling
vt: use kzalloc() instead of the bootmem allocator
sched: use kzalloc() instead of the bootmem allocator
init: introduce mm_init()
vmalloc: use kzalloc() instead of alloc_bootmem()
slab: setup allocators earlier in the boot sequence
bootmem: fix slab fallback on numa
bootmem: use slab if bootmem is no longer available
slow_work_thread() sleeps on slow_work_thread_wq without WQ_FLAG_EXCLUSIVE,
this means that slow_work_enqueue()->__wake_up(nr_exclusive => 1) wakes up all
kslowd threads. This is not what we want, so we change slow_work_thread() to
use prepare_to_wait_exclusive() instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
Lets not use the bootmem allocator in cpupri_init() as slab is already up when
it is run.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var().
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Don't hardcode to node zero for early boot IRQ setup memory allocations.
[ penberg@cs.helsinki.fi: minor cleanups ]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Now that we set up the slab allocator earlier, we can get rid of some
alloc_bootmem_cpumask_var() calls in boot code.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Now that kmem_cache_init() happens before sched_init(), we should use kzalloc()
and not the bootmem allocator.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
This patch handles the kmemleak operations needed for modules loading so
that memory allocations from inside a module are properly tracked.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
So as to be able to distuinguish between multiple counters.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename the perf enums to be in the 'perf_' namespace and strictly
enumerate the ABI bits.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename perf_counter_limit to perf_counter_max_sample_rate and
prohibit creation of counters with a known higher sample
frequency.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename the perf_counter_priv knob to perf_counter_paranoia (because
priv can be read as private, as opposed to privileged) and provide
one more level:
0 - permissive
1 - restrict cpu counters to privilidged contexts
2 - restrict kernel-mode code counting and profiling
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas, Andrew and Ingo pointed out that we don't have any safety checks
in the clocksource sysfs entries to make sure sysadmins don't try to
change the clocksource to a non high-res timer capable clocksource (such
as jiffies) when high-res timers (HRT) is enabled. Doing so will likely
hang a system.
Correct this by filtering non HRT clocksources from available_clocksources
and not accepting non HRT clocksources with HRT enabled.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
function-graph: always initialize task ret_stack
function-graph: move initialization of new tasks up in fork
function-graph: add memory barriers for accessing task's ret_stack
function-graph: enable the stack after initialization of other variables
function-graph: only allocate init tasks if it was not already done
Manually fix trivial conflict in kernel/trace/ftrace.c
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
* 'rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
rcu: rcu_sched_grace_period(): kill the bogus flush_signals()
rculist: use list_entry_rcu in places where it's appropriate
rculist.h: introduce list_entry_rcu() and list_first_entry_rcu()
rcu: Update RCU tracing documentation for __rcu_pending
rcu: Add __rcu_pending tracing to hierarchical RCU
RCU: make treercu be default
We currently log hw.sample_period for PERF_SAMPLE_PERIOD, however this is
incorrect. When we adjust the period, it will only take effect the next
cycle but report it for the current cycle. So when we adjust the period
for every cycle, we're always wrong.
Solve this by keeping track of the last_period.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For easy extension of the sample data, put it in a structure.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ever since Paul fixed it to unclone the context before taking the
ctx->lock this became a false positive, annotate it away.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: fix restart in wait_requeue_pi
futex: fix restart for early wakeup in futex_wait_requeue_pi()
futex: cleanup error exit
futex: remove the wait queue
futex: add requeue-pi documentation
futex: remove FUTEX_REQUEUE_PI (non CMP)
futex: fix futex_wait_setup key handling
sparc64: extend TI_RESTART_BLOCK space by 8 bytes
futex: fixup unlocked requeue pi case
futex: add requeue_pi functionality
futex: split out futex value validation code
futex: distangle futex_requeue()
futex: add FUTEX_HAS_TIMEOUT flag to restart.futex.flags
rt_mutex: add proxy lock routines
futex: split out fixup owner logic from futex_lock_pi()
futex: split out atomic logic from futex_lock_pi()
futex: add helper to find the top prio waiter of a futex
futex: separate futex_wait_queue_me() logic from futex_wait()
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
xen: cache cr0 value to avoid trap'n'emulate for read_cr0
xen/x86-64: clean up warnings about IST-using traps
xen/x86-64: fix breakpoints and hardware watchpoints
xen: reserve Xen start_info rather than e820 reserving
xen: add FIX_TEXT_POKE to fixmap
lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
xen: honour VCPU availability on boot
xen: add "capabilities" file
xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
xen/sys/hypervisor: change writable_pt to features
xen: add /sys/hypervisor support
xen/xenbus: export xenbus_dev_changed
xen: use device model for suspending xenbus devices
xen: remove suspend_cancel hook
xen/dev-evtchn: clean up locking in evtchn
xen: export ioctl headers to userspace
xen: add /dev/xen/evtchn driver
xen: add irq_from_evtchn
xen: clean up gate trap/interrupt constants
xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
...
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: fix typo in sched-rt-group.txt file
ftrace: fix typo about map of kernel priority in ftrace.txt file.
sched: properly define the sched_group::cpumask and sched_domain::span fields
sched, timers: cleanup avenrun users
sched, timers: move calc_load() to scheduler
sched: Don't export sched_mc_power_savings on multi-socket single core system
sched: emit thread info flags with stack trace
sched: rt: document the risk of small values in the bandwidth settings
sched: Replace first_cpu() with cpumask_first() in ILB nomination code
sched: remove extra call overhead for schedule()
sched: use group_first_cpu() instead of cpumask_first(sched_group_cpus())
wait: don't use __wake_up_common()
sched: Nominate a power-efficient ilb in select_nohz_balancer()
sched: Nominate idle load balancer from a semi-idle package.
sched: remove redundant hierarchy walk in check_preempt_wakeup
* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
x86, boot: add new generated files to the appropriate .gitignore files
x86, boot: correct the calculation of ZO_INIT_SIZE
x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN
x86, boot: correct sanity checks in boot/compressed/misc.c
x86: add extension fields for bootloader type and version
x86, defconfig: update kernel position parameters
x86, defconfig: update to current, no material changes
x86: make CONFIG_RELOCATABLE the default
x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB
x86: document new bzImage fields
x86, boot: make kernel_alignment adjustable; new bzImage fields
x86, boot: remove dead code from boot/compressed/head_*.S
x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
x86, boot: make symbols from the main vmlinux available
x86, boot: determine compressed code offset at compile time
x86, boot: use appropriate rep string for move and clear
x86, boot: zero EFLAGS on 32 bits
x86, boot: set up the decompression stack as early as possible
x86, boot: straighten out ranges to copy/zero in compressed/head*.S
x86, boot: stylistic cleanups for boot/compressed/head_64.S
...
Fixed trivial conflict in arch/x86/configs/x86_64_defconfig manually
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
x86, apic: Fix dummy apic read operation together with broken MP handling
x86, apic: Restore irqs on fail paths
x86: Print real IOAPIC version for x86-64
x86: enable_update_mptable should be a macro
sparseirq: Allow early irq_desc allocation
x86, io-apic: Don't mark pin_programmed early
x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
x86, irq: update_mptable needs pci_routeirq
x86: don't call read_apic_id if !cpu_has_apic
x86, apic: introduce io_apic_irq_attr
x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
x86: read apic ID in the !acpi_lapic case
x86: apic: Fixmap apic address even if apic disabled
x86: display extended apic registers with print_local_APIC and cpu_debug code
x86: read apic ID in the !acpi_lapic case
x86: clean up and fix setup_clear/force_cpu_cap handling
x86: apic: Check rev 3 fadt correctly for physical_apic bit
x86/pci: update pirq_enable_irq() to setup io apic routing
x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
...
Also employ the overflow handler to adjust the frequency, this results
in a stable frequency in about 40~50 samples, instead of that many ticks.
This also means we can start sampling at a sample period of 1 without
running head-first into the throttle.
It relies on sched_clock() to accurately measure the time difference
between the overflow NMIs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to update the print formats for events requires a vprintf
format in the trace_seq. This patch adds that interface.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
...
Cons:
- no dev_t info for the output of plug, unplug_timer and unplug_io events.
no dev_t info for getrq and sleeprq events if bio == NULL.
no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.
This is mainly because we can't get the deivce from a request queue.
But this may change in the future.
- A packet command is converted to a string in TP_assign, not TP_print.
While blktrace do the convertion just before output.
Since pc requests should be rather rare, this is not a big issue.
- In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
has a unique format, which means we have some unused data in a trace entry.
The overhead is minimized by using __dynamic_array() instead of __array().
I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:
dd dd + ioctl blktrace dd + TRACE_EVENT (splice)
1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s
2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s
3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s
So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.
And the binary output of TRACE_EVENT is much smaller than blktrace:
# ls -l -h
-rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
-rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
-rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out
Following are some comparisons between TRACE_EVENT and blktrace:
plug:
kjournald-480 [000] 303.084981: block_plug: [kjournald]
kjournald-480 [000] 303.084981: 8,0 P N [kjournald]
unplug_io:
kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1
kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1
remap:
kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384
bio_backmerge:
kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald]
getrq:
kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald]
bash-2066 [001] 1072.953770: 8,0 G N [bash]
bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash]
rq_complete:
konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0]
ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0]
ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]
rq_insert:
kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald]
Changelog from v2 -> v3:
- use the newly introduced __dynamic_array().
Changelog from v1 -> v2:
- use __string() instead of __array() to minimize the memory required
to store hex dump of rq->cmd().
- support large pc requests.
- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.
- some cleanups.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already. Avoid surprises when MAXSMP is enabled.
Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Our async work synchronization was broken by "async: make sure
independent async domains can't accidentally entangle" (commit
d5a877e8dd), because it would report
the wrong lowest active async ID when there was both running and
pending async work.
This caused things like no being able to read the root filesystem,
resulting in missing console devices and inability to run 'init',
causing a boot-time panic.
This fixes it by properly returning the lowest pending async ID: if
there is any running async work, that will have a lower ID than any
pending work, and we should _not_ look at the pending work list.
There were alternative patches from Jaswinder and James, but this one
also cleans up the code by removing the pointless 'ret' variable and
the unnecesary testing for an empty list around 'for_each_entry()' (if
the list is empty, the for_each_entry() thing just won't execute).
Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want to use hrtimers in UBIFS (for write-buffer write-back timer).
We need the 'hrtimer_set_expires_range_ns()', which is an in-line
function which uses 'ktime_add_safe()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.
Clean this up by creating a separate attr->type field.
Also clean up the various similarly complex user-space bits
all around counter attribute management.
The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).
(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to allow easy tracking of the period, also provide means of
adding it to the sample data.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to track the vdso also generate mmap events for
install_special_mapping().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read. The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero. On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.
This fixes it by using atomic_long_read rather than atomic_read.
[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 95a3540da9 ("ptrace_detach: the wrong
wakeup breaks the ERESTARTxxx logic") removed the "extra"
wake_up_process() from ptrace_detach(), but as Jan pointed out this breaks
the compatibility.
I believe the changelog is right and this wake_up() is wrong in many
ways, but GDB assumes that ptrace(PTRACE_DETACH, child, 0, 0) always
wakes up the tracee.
Despite the fact this breaks SIGNAL_STOP_STOPPED/group_stop_count logic,
and despite the fact this wake_up_process() can break another
assumption: PTRACE_DETACH with SIGSTOP should leave the tracee in
TASK_STOPPED case. Because the untraced child can dequeue SIGSTOP and
call do_signal_stop() before ptrace_detach() calls wake_up_process().
Revert this change for now. We need some fixes even if we we want to keep
the current behaviour, but these fixes are not for 2.6.30.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "trace || CLONE_PTRACE" check in tracehook_report_clone() is not right,
- If the untraced task does clone(CLONE_PTRACE) the new child is not traced,
we must not queue SIGSTOP.
- If we forked the traced task, but the tracer exits and untraces both the
forking task and the new child (after copy_process() drops tasklist_lock),
we should not queue SIGSTOP too.
Change the code to check task_ptrace() != 0 instead. This is still racy, but
the race is harmless.
We can race with another tracer attaching to this child, or the tracer can
exit and detach in parallel. But giwen that we didn't do wake_up_new_task()
yet, the child must have the pending SIGSTOP anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In name of keeping it simple, only track mmap events. Userspace
will have to remove old overlapping maps when it encounters them.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a fork event so that we can easily clone the comm and
dso maps without having to generate all those events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch removes the dependency of mmap_min_addr on CONFIG_SECURITY.
It also sets a default mmap_min_addr of 4096.
mmapping of addresses below 4096 will only be possible for processes
with CAP_SYS_RAWIO.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Eric Paris <eparis@redhat.com>
Looks-ok-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
Throttling logic is broken and we can lock up with too small
hw sampling intervals.
Make the throttling code more robust: disable counters even
if we already disabled them.
( Also clean up whitespace damage i noticed while reading
various pieces of code related to throttling. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current method of printing out a stack trace is to add a new line
and print out the trace:
yum-updatesd-3120 [002] 573.691303:
=> do_softirq
=> irq_exit
=> smp_apic_timer_interrupt
=> apic_timer_interrupt
This looks a bit awkward, and if we have both stack and user stack traces
running, it would be nice to have a title to tell them apart, although
it is easy to tell by the output.
This patch adds an annotation to the start of the stack traces:
init-1 [003] 929.304979: <stack trace>
=> user_path_at
=> vfs_fstatat
=> vfs_stat
=> sys_newstat
=> system_call_fastpath
cat-3459 [002] 1016.824040: <user stack trace>
=> <0000003aae6c0250>
=> <00007ffff4b06ae4>
=> <69636172742f6775>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Here is an updated patch to include the extra call to
trace_seq_init() as requested. This is vs. the latest
-tip tree and fixes the use of multiple __print_flags
and __print_symbolic in a single tracer. Also tested
to ensure its working now:
mount.gfs2-2534 [000] 235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR
mount.gfs2-2534 [000] 235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI
mount.gfs2-2534 [000] 235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX
glock_workqueue-2529 [000] 235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI
glock_workqueue-2529 [000] 235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/user_stack/format", fix the output of
user stack.
before fix:
sh-1073 [000] 31.137561: <b7f274fe> <- <0804e33c> <- <080835c1>
after fix:
sh-1072 [000] 37.039329:
=> <b7f8a4fe>
=> <0804e33c>
=> <080835c1>
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/kernel_stack/format", output format of
kernel stack should use "=>" instead of "<=".
The second problem is that we shouldn't skip the first entry in the stack,
although it seems to be duplicated when used in the "function" tracer,
but events also use it. If we skip the first one, we will drop the topmost
entry of the stack.
The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should
drop it, otherwise it will print a NULL name line.
before fix:
sh-1072 [000] 26.957239: sched_process_fork: parent sh:1072 child sh:1073
sh-1072 [000] 26.957262:
<= syscall_call
<=
sh-1072 [000] 26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120]
sh-1072 [000] 26.957752:
<= preempt_schedule
<= wake_up_new_task
<= do_fork
<= sys_clone
<= syscall_call
<=
After fix:
sh-1075 [000] 39.791848: sched_process_fork: parent sh:1075 child sh:1076
sh-1075 [000] 39.791871:
=> sys_clone
=> syscall_call
sh-1075 [000] 39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120]
sh-1075 [000] 39.792722:
=> schedule
=> preempt_schedule
=> wake_up_new_task
=> do_fork
=> sys_clone
=> syscall_call
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-2-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The last entry in the stack_dump_trace is ULONG_MAX, which is not
a valid entry, but max_stack_trace.nr_entries has accounted for it.
So when printing the header, we should decrease it by one.
Before fix, print as following, for example:
Depth Size Location (53 entries) <--- should be 52
----- ---- --------
0) 3264 108 update_wall_time+0x4d5/0x9a0
...
51) 80 80 syscall_call+0x7/0xb
^^^
it's correct.
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-1-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.
If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.
This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.
This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.
[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.
Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bug in ring_buffer_discard_commit. The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).
I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer. All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.
Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace. Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():
again:
...
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
return NULL;
I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.
Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter(). I haven't
tracked that one down yet.
In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.
Here's the patch for the simple fix:
Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds