Allow passing a remoteexec.REParams to RuleBuilder to configure it to
run the rule remotely through RBE. Requires the rule to use
SandboxInputs, which ensures that RuleBuilder is aware of all of the
inputs and outputs of the rule.
Running sbox in RBE initially seems unnecessary, as RBE is already a
good sandbox, but reproxy can execute RBE actions locally when configured
for local execution, local fallback or racing. Using sbox in RBE ensures
that these local actions are also sandboxed, giving consistent results
between directly executed actions, local RBE actions, and remote RBE
actions.
Bug: 182612695
Test: manual
Change-Id: Icf2f24dde8dee833eb680ba22566a8e1c0143b15
Remove the references to the android package in remotexec so that
the android package can reference the remoteexec package. This
will allow RuleBuilder to integrate directly with remoteexec.
Bug: 182612695
Test: m checkbuild
Change-Id: I15be5ef126d8aacbd605518638f341daf6f31bb3
When RuleBuilder.SandboxInputs() is called configure sbox to copy
all the input files into the sandbox directory and then change the
working directory there when running the command.
Copying input files into the sandbox directory gets tricky when
the input file is the output file from another rule, and could
be at an arbitrary, possibly absolute path based on the value
of OUT_DIR. They will need to be copied to a directory in the
sandbox using the path relative to OUT_DIR.
RSP files need special handling, they need to both be copied into
the sandbox as an input, rewritten to contain paths as seen in the
sandbox, and references to them on the command line need to use
sandbox paths.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: Ic0db961961b186e4ed9b76246881e3f04971825c
* changes:
Convert android/ninja_deps_test.go to test fixtures
Add NinjaDeps to TestResult
Convert android/singleton_module_test.go to test fixtures
Convert android/neverallow_test.go to test fixtures
Convert android/singleton_module_test.go to test fixtures
Convert android/variable_test.go to test fixtures
Convert android/soong_config_modules_test.go to test fixtures
Convert android/mutator_test.go to test fixtures
Convert android/deptag_test.go to test fixtures
Adds the AlwaysRequireApexVariantTag interface to enable
ApexInfoMutator to differentiate between a tag that is excluded from
apex contents but still requires an apex variant and a tag that is
excluded from apex contents and does not require an apex variant.
That is needed to support the sdkMemberVersionedDepTag which excludes
the target from being added to the APEX but requires an APEX variant.
A more detailed explanation is in the comments.
The AlwaysRequireApexVariant() method follows the pattern used in
ReplaceSourceWithPrebuilt of having a method that returns a bool to
trigger the behavior and not say ExcludeFromApexContentsTag that simply
relies on the tag implementing an interface to trigger. That is because
the former is more flexible and allows a tag type to parameterize the
behavior if necessary.
The tags that this will exclude from creating an apex variant are:
* PrebuiltDepTag - by the time the apex variant has been created any
preferred prebuilts will have replaced the sources so there is no
need to create an APEX variant if the only dependency path from the
APEX to the prebuilt is via this tag.
* hiddenApiAnnotationsDependencyTag - the target of which is a purely
build time artifect and MUST NEVER end up in the APEX.
It will also stop calling DepIsInSameApex for any dependency created
by the sdkMemberVersionedDepTag. Which will fix the issue reported in
the bug.
Bug: 182992071
Test: m nothing
Change-Id: I9569e488d6446ca45d3ea8f32a9b74524eb865df
Replaces the uses of buildDir in the unit test methods with t.TempDir()
as it just needs a temporary directory.
Bug: 182885307
Test: m nothing
Change-Id: I70452d548eff53c0bccada09f60eba7a615b5371
Sometimes it is necessary to optionally add a preparer. e.g. There are
many parameterized tests where one of the parameters is some additional
test setup but not every test provides it so it will default to the
"zero" value of whatever type is used for the test setup parameter
Migrating those tests to use test fixtures will typically require that
the test setup parameter be changed to a FixturePreparer, which by
default will be nil.
Attempting to use a nil FixturePreparer in the test fixtures will fail
so the OptionalFixturePreparer was added to wrap a possibly nil
FixturePreparer and thereby avoiding complicating each test with
similar logic.
Bug: 182885307
Test: m nothing
Change-Id: Ia12b2af2105fdc69af4e0b909a37a7b86f1af299
This test does not process any bp files it just needs a directory to
pass to TestConfig so it can use that to fake a PathContext. So, this
just replaces buildDir with a call to T.TempDir().
Bug: 182885307
Test: m nothing
Change-Id: I17c0435b7c45e4f8cb8b03a8ec8e57cfe397975b
This requires linking Blueprint into soong_ui. It lets us avoid the
complicated dance of Ninja files and shell scripts: now the information
as to how soong_build is built is passed directly to Blueprint using a
struct that contains all the information the command line arguments used
to contain.
The ability to run Blueprint from the command line is kept (for now).
Some variables in bootstrap/command.go needed public accessor functions
because soong_build reads them. This will be disentangled by moving the
flag parsing to soong_build.
The presence of the flag definitions in Blueprint means that soong_ui
now also accepts them. This is not a problem in practice because they
are ignored and because soong_ui itself is hidden behind a few layers of
shell scripts.
Test: Presubmits + the new bootstrap_test.sh .
Change-Id: I6dca478f356f56a8aee1e457d71439272351390b
CopyDepsToZip() zips direct dependencies with tags implementing
PackagingItem interface.
Previously, it relied on InstallNeededDependencyTag which has a
different meaning.
- InstallNeededDependencyTag tells whether a dependency is required to
be installed together.
- PackagingItem tells whether a dependency (of PackagingBase) is
required to be packaged.
With the separation of InstallNeededDependencyTag and PackagingItem,
PackagingBase module can distinguish cases which were not available
before.(I = InstallNeededDependencyTag, P = PackagingItem)
a (PackagingBase module)
|
|`--(I)--> b
|
|`--(P)--> c --(I)--> d
|
`--(I/P)--> e
a's CopyDepsToZip(): [c, d, e]
Test: m nothing (packaging_test)
Change-Id: I71fce29b19b0f00dc394981bcf4240e9c1041c7a
Calling ExistentPathForSource from a PackageVarContext has to fall
back to a less optimal glob dependency implementation that adds the
file to out/soong/build.ninja.d. Checking for "frameworks/base"
adds the directory to build.ninja.d, resulting in any writes to that
directory potentially causing a regeneration. Check for
"frameworks/base/Android.bp", which will already cause a regeneration
if its timestamp changes and therefore not increase regenerations.
Bug: 158342713
Test: m nothing && touch frameworks/base/foo && m nothing
Change-Id: Iac7ac0445dbaa365c90e9a012f1f32020afc6c08
Output files in sandboxed RuleBuilder rules must be under the output
directory, but output paths that were marked as temporaries were
not error checked.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: I09616402ef1637c2c455ec7d345a296711582e8f
WriteFileRule shouldn't force the caller to ninja escape the input,
and should shell escape spaces.
Bug: 182612695
Test: manual
Change-Id: Ide2f1ed92783eef7883279238de209d992d8f735
Now that rsp files use an explicit path instead of $out.rsp the
unescaped spans and NinjaEscapedCommands() support can be removed
from RuleBuilder.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: I6705151ff0528c59aa1af56ee52c294da15a7a66
Using $out.rsp as the rsp file adds extra complexity around keeping
the $ unescaped. Make callers to FlagWithRspFileInputList provide
an explicit path for the rsp file instead.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: I3f531d80c1efa8a9d09aac0a63790c5b11a9f0c6
The CommandDeps and Rspfile properties can contain arbitrary paths
that may need ninja escaping.
Bug: 182612695
Test: genrule_test.go
Change-Id: I1426e9dfeab3bde9f65b61d0c47840f97c1c7526
modules converted with bp2build_available are will also be available to
be used in mixed builds.
Test: build/bazel/scripts/milestone-2/demo.sh full
Test: go tests
Change-Id: I49f16ec3ba5bb11dfed8066af069c27eb04371fb
If a FixtureFactory was created with a nil buildDirSupplier then this
change will cause it to create a test specific directory instead. This
will allow packages whose tests have been fully converted to the test
fixture model to remove the need for the package level buildDir
variable.
Bug: 182885307
Test: m nothing
Change-Id: Ifa70acadbd90356fadbe39675bac3214d925aa2f
The existing NormalizePathForTesting function does not handle make
install paths very well, as it returns a relative path with a leading
"../" which is very confusing. It also does not clearly differentiate
between the different paths.
These functions return paths that are basically what are seen in a
normal developer build, i.e.
* <source path>
* out/soong/<soong output path>
* out/<make output path>
That makes tests that use them easier to understand.
Follow up changes will clean up the existing usages of the
Normalize... functions.
Bug: 182885307
Test: m nothing
Change-Id: I17ddc996bef5bbbf4a62da8334ea6ce29e306109
The end goal of this exercise is to remove all mutable global state so
that multiple Blueprint instances can be run in the same process.
Test: Presubmit.
Change-Id: Idb34b0920f2c7d92efb9328ce8a78b7306f89571
If both bp2build_available and label are specified, label will be
preferred.
Initially, we copy the entire BUILD.bazel file. Eventually we may move
this to use bazel query for a more accurate result.
Test: go test *
Test: build/bazel/scripts/milestone-2/demo.sh full
Test: GENERATE_BAZEL_FILES=true m nothing
edit bionic/libc/tools/BUILD.bazel
GENERATE_BAZEL_FILES=true m nothing and verify changes picked up
Bug: 180516554
Change-Id: I43025583300e6b10d2c18032cd4a76237b578d59
This change is in preparation for removing testing.T from TestResult.
Bug: 181070625
Test: m nothing
Change-Id: Iac627cc3c9f922ec4a41ce657442e4139fe7defb
This change is in preparation for removing testing.T from TestResult.
Bug: 181070625
Test: m nothing
Change-Id: Ib51c7d4e5efdcbe0652df10b66140058a8bfa471
Although they are intended to be used together they are separate pieces
of functionality so should be separate.
Bug: 181070625
Test: m nothing
Change-Id: I3b2ccf66748a3c53b63c112256a8eb20e0448179
Modules that are not available for platform are developed with
updatability in mind, and do not require manual approvals.
Bug: 181223240
Test: checkbuild
Change-Id: I10b91053b3ef5a9ff5400d9d7a68fae3144a671c
This lets us not leak $PATH to soong_build. It was only needed for
Darwin tests anyway.
Test: Will ask jingwen@ who has a Mac.
Change-Id: I4647e41275b323fe6283580f8f92718c6229f23e
This probably got broken by aosp/1609473 because soong_build is now
invoked in two different ways:
- By its absolute path during building out/soong/build.ninja
- By its path relative to the source root when generating documentation
Bug: 182347000
Test: Manual (the long incantation on b/182347000)
Change-Id: I0a3a97e4865ffde4a450a3f7baf3980b5a2016c8
* changes:
Support test fixtures in sh package
Support test fixtures in bpf package
Support test fixtures in cc package
Add temporary RunTestWithConfig method to simplify migration
Support test fixtures in etc package
Convert license tests to use test fixtures
As part of the work on the new fixture mechanism some of the TestHelper
functionality was moved into the android/fixture.go package. This moves
the rest and removes the now duplicated TestHelper from the sdk
package.
Also removed some unnecessary & operators.
Bug: 181070625
Test: m nothing
Change-Id: Ia09a5d05e4fab3a4e28cf44b2d947a33541e3925
The old error message was wrong because this message is emitted
specifically when a non-hermetic tool is not found.
Test: Manual ("m nothing")
Change-Id: I857c1c2bb059aff894e8bd3dd0c09b030c82035d
They should have had `android:"path"` tags attached so that users can
point them to filegroup modules.
Test: app_test.go & app_import_test.go
Bug: 182175153
Change-Id: I5580408488ffe5fc12c869cbfb7a468713dcbc96
Used to exercise the new functions to allow the env configuration of a
test fixture to be customized.
Bug: 181070625
Test: m nothing
Change-Id: Iea1d7b20498d690fcade4b6699a70773ea9175c2
This change tries to distinguish between the preparations needed for an
integration test and the preparations needed for more unit-testy tests.
Integration tests exercise most, if not all of Soong (at least the
parts that are available when running tests in a specific package) and
as a result can take a long time. Other tests, while being as realistic
as possible, should only use a subset of the preparations in order to
reduce run time.
Registering module types has very little overhead so it is simplest to
try and register those all together. However, care needs to be taken
for singletons and mutators as they can do a lot of work. Especially
with tests that include lots of default module definitions such as are
created by java.GatherRequiredDepsForTest().
Once it is possible to use test fixtures in tests it will be much
easier to customize tests individually and so avoid just adding new
test specific content to the common deps.
Bug: 181070625
Test: m nothing
Change-Id: Ia0a676297224d90df947054746e7f99563ffb323
It is no longer necessary to use preparers in a specific order now that
the test infrastructure enforces a consistent registration order.
So, this change:
* Sorts preparers alphabetically to make them easier to maintain.
* Creates a single visiblity preparer for all the visibility mutators.
* Adds PrepareForTestWithPackageModule
Bug: 181070625
Bug: 181953909
Test: m nothing
Change-Id: I9e65dd182be664d8d0d5db7ccc0b63fa315129c8
In addition, make the Ninja command nicer by using backticks instead of
backslash-quoting double quotes.
Test: Manual: "m queryview"
Change-Id: I5d6e1d41424e0229bfe08e2e7eaf2fb025ed48c2
Because OverridablePropertiesDepsMutator is run after prebuilt_postdeps,
prebuilt's replacement doesn't affect to those deps added by overridable
properties.
By running prebuilt_postdeps again after
OverridablePropertiesDepsMutator, replacing source with prebuilts is
applied to those deps.
Bug: 152155285
Bug: 181953909
Bug: 181974714
Test: m nothing
Change-Id: I24acc02785c9580c2beca096042f1173eb28ba9a
Previously, the TestContext.Register() method stored all the components
that were available, rather than just the ones that were used by the
tests. That was practically useless for debugging. This change just
stores the ones used by the test.
Bug: 181953909
Test: m nothing
Change-Id: I8589b9b4423133709ab0cfd763bd284a7f47a24a
* changes:
Separate the collation of singletons from registration
Defer registration of singletons and pre-singletons in TestContext
Ensure mutators used in tests are in the same order as at runtime
Previously, there was a bug that caused tests which ran successfully on
their own to fail when run together in parallel. They each extended the
same factory and ended up sharing the preparers slice which meant that
they overwrote each other's preparers causing the tests to fail.
This change fixes that by creating a new slice for each factory.
Bug: 181070625
Test: m nothing
Change-Id: If340c125c5b03a9d5c36a59ff4da4ec189808f9b
That is to allow the order in which singletons are registered at
runtime, including the ones added by default, to be used to define the
order in which singletons must be registered in tests.
Bug: 181953909
Test: m nothing
Change-Id: I22f90c90100a8d52a572d4451a1a5d256784b57a
In preparation for allowing the TestContext to enforce an ordering on
the registration of singletons and pre-singletons in the same way as it
does for mutators this defers the registration of them into the
underlying Context.
Bug: 181953909
Test: m nothing
Change-Id: I2d9652122bb6387b6b47ca4761e811885d15c2b6
This change uses the order in which mutators are registered at runtime
to define the order in which mutators must be registered in tests to
improve test reliability and prevent issues like bug 181974714.
Generally, it simply sorts the test mutators into the same order as
used at runtime. However, if the test includes a mutator that is not
used at runtime then it cannot sort them because it does not have
enough information to know where it should appear in that order. So,
instead it simply checks the order and makes sure that it matches.
Allowing relationships between mutators to be explicitly defined, e.g.
mutator X should come after mutator Y but before mutator A would fix
that information gap and allow them to be sorted but that is outside
the scope of this piece of work.
The code here is written generically for a sortableComponent as
follow up changes will sort singletons and pre-singletons in the same
way.
Bug: 181953909
Test: m nothing
Change-Id: Ib7d421f578e25f6dccaaff4f73b69838d1b54b00
This got broken by aosp/1610785 which changed the assumptions
soong_build makes about its environment.
At that time, I didn't know that queryview also invokes soong_build
through another pathway.
Test: Manual: "m queryview && m nothing"
Change-Id: I06ed42aee0d97e18f634eeeaca37108009b29d78
This works by setting the SOONG_UI_DELVE= environment variable to the
port on which soong_ui should accept a Delve connection on.
This is achieved by reusing the Delve execution logic between soong_ui
and soong_build.
Test: Manual.
Change-Id: Id2c1d4b6faac1a4a3918c91030ce2239f7daf54f
This separates the collation of mutators from the registration of them
to allow the test infrastructure to sort the mutator order to match
that used at runtime.
Bug: 181953909
Test: m nothing
Change-Id: I01a073289d44417f327b0815c09eb1c033d464f2
In preparation for following changes that will ensure the order of
registration (and so execution) for mutators, singletons and
pre-singletons in tests match the order in runtime this change creates
the sortableComponent interface to allow those to be sorted in the same
way without having to resort to reflection.
By moving the registration code into each component type this change
also eliminates some unnecessary duplication of that code.
Bug: 181953909
Test: m nothing
Change-Id: I597b461b966c84faaeb13e7dff765f1fadd99981
Fix recursing into nested properties when creating the structs for
affectable properties in soong config modules.
Fixes: 181156850
Test: Test_createAffectablePropertiesType
Change-Id: I4fb645d7e334977d0bbf192c3b43a7bba8289f49
A lot of existing tests that expect errors to be reported do not check
the returned result. This change treats failures of the error handler
in that situation as fatal.
The default error handler already behaved that way. The others did not.
FixtureExpectsAllErrorsToMatchAPattern uses
CheckErrorsAgainstExpectations and it was safe to just make that func
treat any unmatching errors as fatal as all the existing usages are at
the end of test functions.
FixtureExpectsAtLeastOneErrorMatchingPattern uses the
FailIfNoMatchingErrors function which is used in a number of places
(including CheckErrorsAgainstExpectations) that do not want to treat
a test failure as fatal. So, that was modified to return false if no
matching error was found and the error handler treated that as fatal.
Bug: 181070625
Test: m nothing
Change-Id: I6e4df53f93250348bc050d4ff098134e6314ae30
A FixtureFactory is supposed to be immutable to allow them to be safely
shared but unfortunately the implementation of SetErrorHandler broke
that constraint. That made it very easy to mistakenly add an error
handler specific to a test to a shared factory breaking other tests
that use that factory.
This change causes SetErrorHandler to create a new instance of the
factory to avoid that.
Bug: 181070625
Test: m nothing
Change-Id: Ia5356a04189099c88880a2a521af29ab72560f30
FixturePreparers is a bad name for a method that creates a collection
of FixturePreparers for a couple of reasons:
* Conventionally it would be used as the name for []FixturePreparer if
it is necessary to add behavior to that.
* There are many different types of collection, particularly when order
matters.
Bug: 181070625
Test: m nothing
Change-Id: I55394ff369375dcac2d7b72e4d803a4818762d36
Use restat for the api_versions.xml and annotations.zip dependencies
of lint so that frameworks/base changes don't always result in
rerunning lint on every module.
Bug: 181681346
Test: m lint-check
Change-Id: Ic6a540b41cf79b21441311a8baefe528a3d90d8b
When running tests locally, it fails to build due to using the incorrect
formatting.
Test: go test soong test
Change-Id: Iccdc3fbc93e409d74f1b71d929dd9650492b401d
aosp/1609473 broke this by making originalEnv empty unless
InitEnvironment() is called, which doesn't happen in tests.
Bug: 181835672
Test: "m nothing" on Linux and Darwin.
Change-Id: I33f9cce65a9151e620e1dddafb62d4c599ed2cac
1) suggest a fix at the end of the message
2) add new lines around the dependency path so that they are visually
separated from rest of the error message
Bug: N/A
Test: m with an intentional break
error: bionic/apex/Android.bp:32:1: module "com.android.runtime" variant "android_common_com.android.runtime_image": "libutils_headers" requires "libsystem_headers" that doesn't list the APEX under 'apex_available'.
Dependency path:
via tag apex.dependencyTag: { name:executable payload:true}
-> crash_dump{os:android,image:,arch:arm_armv8-a,sdk:,apex:apex10000}
via tag cc.libraryDependencyTag: { Kind:staticLibraryDependency Order:normalLibraryDependency wholeStatic:false reexportFlags:false explicitlyVersioned:false dataLib:false ndk:false staticUnwinder:false makeSuffix: skipApexAllowedDependenciesCheck:false excludeInApex:false}
-> libtombstoned_client_static{os:android,image:,arch:arm_armv8-a,sdk:,link:static,apex:apex10000}
via tag cc.libraryDependencyTag: { Kind:staticLibraryDependency Order:normalLibraryDependency wholeStatic:true reexportFlags:true explicitlyVersioned:false dataLib:false ndk:false staticUnwinder:false makeSuffix: skipApexAllowedDependenciesCheck:false excludeInApex:false}
-> libcutils{os:android,image:,arch:arm_armv8-a,sdk:,link:static,asan:,apex:apex10000}
via tag cc.libraryDependencyTag: { Kind:headerLibraryDependency Order:normalLibraryDependency wholeStatic:false reexportFlags:false explicitlyVersioned:false dataLib:false ndk:false staticUnwinder:false makeSuffix: skipApexAllowedDependenciesCheck:false excludeInApex:false}
-> libutils_headers{os:android,image:,arch:arm_armv8-a,sdk:,asan:,apex:apex10000}
via tag cc.libraryDependencyTag: { Kind:headerLibraryDependency Order:normalLibraryDependency wholeStatic:false reexportFlags:true explicitlyVersioned:false dataLib:false ndk:false staticUnwinder:false makeSuffix: skipApexAllowedDependenciesCheck:false excludeInApex:false}
-> libsystem_headers{os:android,image:,arch:arm_armv8-a,sdk:,asan:,apex:apex10000}
Consider adding "com.android.runtime" to 'apex_available' property of "libsystem_headers"
Change-Id: I09f92c3086ea433780133a33ba0ad73baee6dc41
init_rc and vintf_fragments have been directly translated into
LOCAL_INIT_RC and LOCAL_VINTF_FRAGMENTS and then installed completely in
Make. This is causing problem when a module having either of the
properties is included in an android_filesystem module. The rc or
fragment files are not included in the filesystem module because Soong
doesn't track the files.
This change fixes the problem by calling PackageFile() on the two types
of files so that they appear in PackagingSpecs().
Bug: 181728384
Test: m microdroid_super and inspect the image. It has
/system/etc/init/servicemanager.rc
Change-Id: Ie1443696369b5d2b1e8f520f0f218d33a3dd67b7
Rename to get consistent ramdisk directory naming in
out/target/product/<name>:
debug_ramdisk
ramdisk
vendor_debug_ramdisk
vendor_ramdisk
Test: build and inspect out/target/product/<name>
Change-Id: Ib86e6509bd910e8c95bcb6e3f7bb639ebbfe3758
This lets one avoid any decisions as to when to chdir there during its
execution and leads to better sandboxing because the pwd doesn't leak to
init() functions anymore.
Test: Manual.
Change-Id: I1560da8ed3a621249426f9e8908aa890c21e13ba
Adds support for customizing the error handling behavior of test
fixtures and converts a test to use it.
Bug: 181070625
Test: m nothing
Change-Id: I736c41311819d57d8688fc3b0e021dbb50c491c1
Also delete the now-unnecessary soong_env binary.
Test: Manually. Also checked what happens when a used environment
variable changes.
Change-Id: Ib393e7f444e94819198c6cce4bcd8719d9fd9441
Originally, when the prebuilt_apex was first created, it selected the
source to use in its DepsMutator. It did that because that was a
convenient place for it to perform that work which had to be:
* After the arch mutator had run so MultiTargets() was available.
* Before the prebuilt_select mutator runs as that relied on the Source
property to have been set.
Change 064b70c9 then duplicated the call from the DepsMutator of the
deapexer module type that was added as part of the work to make dex
files available for hiddenapi processing.
Change 356f7d45 moved it out of the the DepsMutator methods into its
their own mutators, presumably because it interfered with the
Soong -> Bazel conversion work.
This change improves the existing PrebuiltSrcsSupplier mechanism to
support reporting errors so that the logic for selecting the source can
be done on demand rather than in separate mutators.
The main complication was that PrebuiltSrcsSupplier is called with a
BaseModuleContext for both source and prebuilt modules so it cannot use
any methods on it that are related to the current module. That
necessitated adding MultiTargets() to android.Module.
Bug: 181267622
Test: m droid
Change-Id: I106c78fd21016f051a315b82b470d8f12b1f820b
Adds the test fixture support and converts a few tests to exercise the
code and show how it works.
Bug: 181070625
Test: m nothing
Change-Id: I0a2b40fff93b6041f9aa8c4ef0aba91da1bc8bf3
This CL adds a basic framework to support configurable string_list
attributes, selecting on the Arch variant (x86, x86_64, arm, arm64).
It offers fine-grained controls to map individual configurable
properties (arch_variant) to configurable Bazel attributes, starting
with the string_list type for the copts property for cc_object.
This design is primarily motivated to have minimal boilerplate in
bp2build mutators, allowing anyone to opt-in configurable attributes,
and modify intermediate states before passing them on into the
CreateBazelTargetModule instantiator.
Fixes: 178130668
Test: go tests
Test: build/bazel/scripts/milestone-2/demo.sh
Change-Id: Id6f04d7c560312a93e193d7ca4e1b7ceb6062260
It became obsolte by If96cccbd82ba1311165d61c947c928c6e7cd5593 and
Iaaac16ae171c06d90d04d7cac11789d3f39b8d99
Test: TreeHugger
Change-Id: Ifc8f28663b480ef5aff93a54040339ef080072c9
This change fixes a bug that android:path attribute is ignored when
annotated field is in a slice of struct.
blueprint now traverses fields whose type is slice of struct and
provides the index list in the case. Soong is modified so that it checks
whether the field being referenced is a slice of struct or not. If that
is the case, it gathers field values from each of the elements. If not,
it follows the original path.
Bug: 181018147
Test: m nothing
Change-Id: I220efb6feaa525a00939654459b2998e98e7ad56
This allows more direct access to the bazel label and whether the module
is bp2build available.
Test: go test *
Change-Id: I23375835d20fa53d7d94127b2dc2d5bb20487bfb
This eliminates the need to remove quotes, delete attributes, and
re-checking that name has correct prefix. Additionally, this allows
assignment directly to the BazelTargetModuleProperties struct, which
allows defaulting unused fields and clarity of which field is being set.
Test: go test soong tests
Test: ran ./build/bazel/scripts/milestone-2/demo.sh
Change-Id: Ia9bfcce76234c793a4ddd5f29a661150f83341c9
Add a ctx parameter to AndroidMkExtraEntriesFunc to allow them to
access providers.
Test: m checkbuild
Change-Id: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
Merged-In: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
NDK has 4 ABIs, i.e. x86, x86_64, armv7-a, armv8-a, but cintltst
can only compiled into single ABI, or otherwise, the java_test_host
CtsIcu4cTestCases can't include cintltst in the "data" property
because the "data" property can only include dependecies with
a single variant/ABI.
CtsIcu4cTestCases needs to use "data" property instead of
"host_required" dependency because "host_required" relationship
does not work for streaming the "general_tests" in the post-submit
infra-strucuture. See https://r.android.com/1175350 for the details.
Bug: 168445204
Bug: 160350521
Test: OUT_DIR=ndk_out build/soong/scripts/build-ndk-prebuilts.sh
Change-Id: I81429cc261ec4e25aefe363abb099048ff026505
Colin Cross