This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This deletes a block of code that raised a command index error if a
command returned response data, but the guest did not set the
appropriate bits in the response register to handle such a response. I
cannot find any documentation that suggests the controller should
behave in this way, the error code doesn't make sense (command index
error is defined for the case where the index in a response does not
match that of the issued command), and in at least one case (CMD23
issued by UEFI on Raspberry Pi 2), actual hardware does not do this.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This check was conditionalising SD card operation on the card being
powered by the SDHCI host controller. It is however possible
(particularly in embedded systems) for the power control of the SD card
to be managed outside of SDHCI. This can be as trivial as hard-wiring
the SD slot VCC to a constant power-rail.
This means the guest SDHCI can validly opt-out of the SDHCI power
control feature while still using the card. So delete this check to
allow operation of the card with SDHCI power control.
This is needed for at least Xilinx Zynq and Raspberry Pi, and
also makes Freescale i.MX25 work for me. The digilent Zybo board
has a public schematic which shows SD VCC hardwiring:
http://digilentinc.com/Data/Products/ZYBO/ZYBO_sch_VB.3.pdf
bottom of page 3.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1450738069-18664-2-git-send-email-Andrew.Baumann@microsoft.com
[AB: Add Pi to list of devices fixed in commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Request merging must not result in a huge request that exceeds the
maximum number of iovec elements. Use BlockLimits.max_iov instead of
hardcoding IOV_MAX.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
1. avoid possible superflous checking
2. make code more robustness
["make code more robustness" refers to avoiding integer
underflows/overflows.
--Stefan]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1447207166-12612-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function. If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.
Fix it by removing the double access to src->nr_segments.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This was found by code inspection. If the request is cancelled twice,
the notifier is never called on the second cancellation request,
and hence for example a TMF might never finish.
All the calls in scsi_req_cancel_async are idempotent, so the change
is safe.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-2-git-send-email-pbonzini@redhat.com>
This avoids calls to aio_poll without having acquired the context first.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-1-git-send-email-pbonzini@redhat.com>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the previous patch which changed pvscsi to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie'.
Its default value is false, exposing pvscsi as a pcie device.
Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-7-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report the 'express endpoint' capability if on a PCIE bus.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-6-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a class type for pvscsi, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.
No semantic change.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-5-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following the previous patches, which introduced various changes in
pvscsi's pci configuration space (device subsystem id and revision, msi
offset), this patch introduces a boolean property
'x-old-pci-configuration' to pvscsi.
Its default value is false, exposing the above changes in the pci config
space.
Setting 'x-old-pci-configuration' to 'on' preserves the old behavior,
which allows migration to older versions.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-4-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place device reported MSI capability at the same offset as placed by
the VMware virtual hardware - at offset 0x7c.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-3-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be VMware PVSCSI SCSI Controller, rev 02.
As reported by the VMware virtual hardware.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-2-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to prepare for CCM code refactoring.
This is just a bit of function and enum values renaming.
We also remove some useless intermediate variables.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.
We change the CCMR reg reset value to match linux expected config.
This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.
With this change the "sleep 60" command on linux is time accurate
with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a gpio-keys node. This is used for Poweroff for the systems which
use DT not ACPI.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-11-git-send-email-zhaoshenglong@huawei.com
[PMM: use "standard-headers/linux/input.h" rather than <linux/input.h>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently mach-virt model doesn't support powerdown request. Guest VM
doesn't react to system_powerdown from monitor console (or QMP) because
there is no communication mechanism for such requests. This patch registers
GPIO Pin 3 with powerdown notification. So guest VM can receive notification
when such powerdown request is triggered.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here GPIO pin 3 is used for Power Button, add _E03 in ACPI DSDT table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GPIO controller in ACPI DSDT table. It can be used for gpio event.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-5-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
powerdown, hotplug evnets. Add a GPIO controller in machine virt,
to support powerdown, maybe can be used for cpu hotplug. And
here we use pl061.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASL Interrupt() macro translates to Extended Interrupt Descriptor
which supports variable number of IRQs. It will be used for
conversion of ASL code for pc/q35 machines that use it for
returning several IRQs in _PSR object.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add serialized method support so that explicit Mutex can be
avoided
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a first baby step towards removing widespread inclusion of
cpu.h and compiling more devices once (so that arm, aarch64 and
in the future target-multi can share the object files).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: changed __FUNCTION__ to __func__ since we're touching
these lines of code anyway]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Behaviour of emulated devices should not depend on the endianness
of the CPU, so avoid using the endian-dependent load and store
functions in the PXA2xx and OMAP display devices. These devices
are little endian when they do DMA access.
(Since ARM softmmu is always compiled as little endian, this means
that the endian-dependent load and store functions are always little
endian, so this commit makes no functionally visible change.)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The i.MX6 GPIO device supports 2 interrupts instead of one.
* 1 for the lower 16 GPIOs.
* 1 for the upper 16 GPIOs.
i.MX31 and i.MX25 only support 1 interrupt for the 32 GPIOs.
So we add a property to turn the behavior on when required.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1447497668-1603-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X75u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-12-17' into staging
QAPI patches for 2015-12-17
# gpg: Signature made Thu 17 Dec 2015 07:33:41 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-12-17: (40 commits)
qapi: Detect base class loops
qapi: Move duplicate collision checks to schema check()
qapi: Enforce (or whitelist) case conventions on qapi members
qapi: Track enum values by QAPISchemaMember, not string
qapi: Prepare new QAPISchemaMember base class
qapi: Shorter visits of optional fields
qapi: Simplify visits of optional fields
qapi: Fix alternates that accept 'number' but not 'int'
qapi: Inline _make_implicit_tag()
qapi-types: Drop unnedeed ._fwdefn
qapi: Simplify visiting of alternate types
qapi: Convert QType into QAPI built-in enum type
qobject: Rename qtype_code to QType
qobject: Simplify QObject
qapi: Change munging of CamelCase enum values
qapi: Add alias for ErrorClass
cpu: Convert CpuInfo into flat union
qapi: Remove obsolete tests for MAX collision
qapi: Don't let implicit enum MAX member collide
qapi: Tighten the regex on valid names
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
IOPort read access is limited to one byte at a time by
fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely
ignore its size argument (which will always be 1), and simply
call its fw_cfg_read() helper function once, returning 8 bits
via the least significant byte of a 64-bit return value.
This patch replaces fw_cfg_comb_read() with the generic method
fw_cfg_data_read(), and removes the unused fw_cfg_read() helper.
When called with size = 1, fw_cfg_data_read() acts exactly like
fw_cfg_read(), performing the same set of sanity checks, and
executing the while loop at most once (subject to the current
read offset being within range).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-7-git-send-email-somlo@cmu.edu
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce fw_cfg_data_read(), a generic read method which works
on all access widths (1 through 8 bytes, inclusive), and can be
used during both IOPort and MMIO read accesses.
To maintain legibility, only fw_cfg_data_mem_read() (the MMIO
data read method) is replaced by this patch. The new method
essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read()
combo, but without unnecessarily repeating all the validity
checks performed by the latter on each byte being read.
This patch also modifies the trace_fw_cfg_read prototype to
accept a 64-bit value argument, allowing it to work properly
with the new read method, but also remain backward compatible
with existing call sites.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When calculating a pointer to the currently selected fw_cfg item, the
following is used:
FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.
This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.
This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, the fw_cfg internal API specifies that if an item was set up
with a read callback, the callback must be run each time a byte is read
from the item. This behavior is both wasteful (most items do not have a
read callback set), and impractical for bulk transfers (e.g., DMA read).
At the time of this writing, the only items configured with a callback
are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They
all share the same callback functions: virt_acpi_build_update() on ARM
(in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in
hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return
without doing anything at all after the first time they are invoked with
a given build_state; since build_state is also shared across all three
items mentioned above, the callback only ever runs *once*, the first
time either of the listed items is read).
This patch amends the specification for fw_cfg_add_file_callback() to
state that any available read callback will only be invoked once each
time the item is selected. This change has no practical effect on the
current behavior of QEMU, and it enables us to significantly optimize
the behavior of fw_cfg reads during guest firmware setup, eliminating
a large amount of redundant callback checks and invocations.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction. That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.
This is CVE-2015-8558.
Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the host polls for events, we check our
events qlist and send one event at a time. Also, note
that the event packet needs to be sent in one go, so
I increased the max packet size to 64.
Tested with a linux guest.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-5-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On a reset, call usb_mtp_object_free on all objects and their children
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Xen toolstack uses "vhd" to specify a disk in VHD format, however
the name of the driver in QEMU is "vpc". Replace "vhd" with "vpc", so
that QEMU can find the right driver to use for it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Since commit 4652f1640e "virtio-9p: add savevm
handlers", if the user hot-unplugs a quiescent 9p device and live
migrates, the source QEMU crashes before migration completetion...
This happens because virtio-9p devices have a realize handler which
calls virtio_init() and register_savevm(). Both calls store pointers
to the device internals, that get dereferenced during migration even
if the device got unplugged.
This patch simply adds an unrealize handler to perform minimal
cleanup and avoid the crash. Hot unplug of non-quiescent 9p devices
is still not supported in QEMU, and not supported by linux guests
either.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20151208155457.27775.69441.stgit@bahia.huguette.org
[PMM: rewrapped long lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce yet another mask for them, so that the generic routine can
handle them, at once rendering xen_pt_pmcsr_reg_write() superfluous.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The way the generic infrastructure works the intention of not allowing
unaligned accesses can't be achieved by simply setting .unaligned to
false. The benefit is that we can now replace the conditionals in
{get,set}_entry_value() by assert()-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The remaining log message in pci_msix_write() is wrong, as there guest
behavior may only appear to be wrong: For one, the old logic didn't
take the mask-all bit into account. And then this shouldn't depend on
host device state (i.e. the host may have masked the entry without the
guest having done so). Plus these writes shouldn't be dropped even when
an entry gets unmasked. Instead, if they can't be made take effect
right away, they should take effect on the next unmasking or enabling
operation - the specification explicitly describes such caching
behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
blk_attach_dev() fails here only when we're working for device
"sdhci-pci" (which already attached the backend), and then we don't
want to attach a second time. If we ever create another failure mode,
we're setting up ourselves to using the same backend from multiple
frontends, which is likely to end in tears. Can't clean this up this
close to the release, so mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two. The properties
that really belong to the card would then have to somehow pass-through
to the card's properties. To avoid that complication, either mark
them experimental or drop them.
Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller. Property "drive" belongs to the card;
rename it to "x-drive". Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The official way of enabling dataplane is through the "iothread"
property that references an iothread object created by "-object
iothread". Since the old "x-data-plane=on" way now even crashes, it's
probably easier to just drop it:
$ qemu-system-x86_64 -drive file=null-co://,id=d0,if=none \
-device virtio-blk-pci,drive=d0,x-data-plane=on
ERROR:/home/fam/work/qemu/qom/object.c:1515:
object_get_canonical_path_component: assertion failed: (obj->parent != NULL)
Aborted
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1449485967-19240-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJWZZJPAAoJEO8Ells5jWIRmp0H/26aFXVEgZykkUVNbqq05r7w
AI7podQlFOAESJHqZtR8FMaH8TAZ5GhphP4pn0PsWp54VjwcYZbdoME+dhZ4Elyc
WDanRHIweLv/zVg6+M8oHhw5GMaxtFLoLWrf0oanbUW9IZZmmM3COz/Y31hSVrR2
EzEJi1VZZhpMj3ibeOJns4MrugYrne8MtOdvusE/Uw2rJBTiStnWw1eTk8RmkNcg
5un1mQZxFU2AcNzmWdmWJmjY0rCnR3HhtTdZOwjM6uZGIJ9hbsItGzqiGadBfozI
fUtIa2HZahioe0VIzoB0snXnAuhV1jA0Uy18i04dPvgQOmiVSRjQNE2/lwQflyE=
=Pad3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
lan9118: log and ignore access to invalid registers, rather than aborting
lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
vmxnet3: silence warning
pcnet: fix rx buffer overflow(CVE-2015-7512)
net: pcnet: add check to validate receive data size(CVE-2015-7504)
e1000: fix hang of win2k12 shutdown with flood ping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vmxnet3 always produces a warning under qtest.
This is not a user error, don't warn.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.
Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.
There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.
On the other hand according to the initial research in
commit e9845f0985
Author: Vincenzo Maffione <v.maffione@gmail.com>
Date: Fri Aug 2 18:30:52 2013 +0200
e1000: add interrupt mitigation support
...
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
this should also boost performance a bit.
See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The GT64xxx's internal registers can be placed above the first 4 GiB
in the address space, but not above the first 64 GiB. Correctly cast
the register to a 64-bit integer, and mask away bits above bit 35.
Datasheet at http://pdf.datasheetarchive.com/datasheetsmain/Datasheets-33/DSA-655889.pdf
(bug reported by Coverity).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the case of a 4-byte length, shifting a value by 24 may cause
an unintended sign extension when converting from int to size_t.
Use a uint32_t variable instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
prop_get_fdt() misuses the visitor API: when fdt is null, it doesn't
visit anything. object_property_get_qobject() happily
object_property_get_qobject(). Amazingly, the latter survives the
misuse. Turns out we've papered over it long before prop_get_fdt()
existed, in commit 1d10b44.
However, commit 6c2f9a1 changed how we paper over it, and as a side
effect changed qom-get's value from {} to null. Change it right back
by fixing the visitor misuse.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It should only be created via spapr_dr_connector_new(). Attempting to
create it with -device crashes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since prop_get_fdt() is only used with QmpOutputVisitor, errors
shouldn't actually happen, so this is only a latent bug.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.
This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.
As a result, device may crash upon attempt to write to the PCIE config
space.
Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.
This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
If you run a qemu advertising VERSION_1 with an old kernel where
vhost did not yet support VERSION_1, you'll end up with a device
that is {modern pci|ccw revision 1} but does not advertise VERSION_1.
This is not a sensible configuration and is rejected by the Linux
guest drivers.
To fix this, add a ->post_plugged() callback invoked after features
have been queried that can handle the VERSION_1 bit being withdrawn
and change ccw to fall back to revision 0 if VERSION_1 is gone.
Note that pci is _not_ fixed; we'll need to rethink the approach
for the next release but at least for pci it's not a regression.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- The bios should be built for the first z machine, so that newer
instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=xIKz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20151201' into staging
Last round of s390x fixes for 2.5:
- The bios should be built for the first z machine, so that newer
instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.
# gpg: Signature made Tue 01 Dec 2015 08:59:42 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20151201:
s390x/pci: fix up IOMMU size
s390x: no deprecation warning while testing
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: build for z900
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Present code uses @size==UINT64_MAX to initialize IOMMU. It infers that it
can map any 64-bit IOVA whatsoever. But in fact, the largest DMA range for
each PCI Device on s390x is from ZPCI_SDMA_ADDR to ZPCI_EDMA_ADDR. The largest
value is returned from hardware, which is to indicate the largest range
hardware can support. But the real IOMMU size for specific PCI Device is
obtained once qemu intercepts mpcifc instruction that guest is requesting a
DMA range for that PCI Device. Therefore, before intercepting mpcifc instruction,
qemu cannot be aware of the size of IOMMU region that guest will use.
Moreover, iommu replay during device initialization for the whole region in
4k steps takes a very long time.
In conclusion, this patch intializes IOMMU region for each PCI Device when
intercept mpcifc instruction which is to register DMA range for the PCI Device.
And then, destroy IOMMU region when guest wants to deregister IOAT.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
'make check' tries to start all available machines; the deprecation
message for the s390-virtio machine is both useless and annoying
there. Silence it while testing.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlZcWOcACgkQAvw66wEB28J96QCgoMJRcWSdhboxEXPasd9Pc4UK
N3EAn2L/vkcFaC6cCt81jZell+jrhzCH
=Z5Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Two fixes for virtfs/9p from Paolo.
# gpg: Signature made Mon 30 Nov 2015 14:10:47 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
virtio-9p: use QEMU thread pool
fsdev-proxy-helper: avoid TOC/TOU race
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QEMU thread pool already has a mechanism to invoke callbacks in the main
thread. It does not need an EventNotifier and it is more efficient too.
Use it instead of GAsyncQueue + GThreadPool + glue.
As a side effect, it silences Coverity's complaint about an unchecked
return value for event_notifier_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(removed no more needed #include <glib.h> from virtio-9p-coth.h)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The taihu_cpld_writel() function had an obvious typo that meant that
if it was ever called it would go into an infinite recursion. Newer
versions of clang will detect and warn about this:
hw/ppc/ppc405_boards.c:481:1: warning: all paths through this function will call itself [-Winfinite-recursion]
Fix this by converting taihu_cpld from the legacy old_mmio accessors
to new-style ones, with an impl {} declaration to cause the core
memory code to do the splitting of 16 bit and 32 bit accesses into
multiple 8-bit accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "pseries" alias is currently set twice, one time for the
pseries-2.4 machine and one time for the "pseries-2.5" machine.
To avoid confusion with the alias, let's remove the one from
the older machine class. And while we're at it, also remove
the "is_default = 0" there since the is_default variable
should be set to zero by default already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
http://lists.nongnu.org/archive/html/qemu-devel/2015-11/msg04592.html
shows an example how an endless loop in function action_command can
be achieved.
During my code review, I noticed a 2nd case which can result in an
endless loop.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWVzX5AAoJECgfDbjSjVRp3UUH/jmankS57MaFIfB2plhrFlk0
BAjMLhJ6GCLrDEAaMaes9wJXJJMQHfoZnwAqkfkvjabKbiq6yPZz2FIfjSKuV86Z
F6XNuMxiM2qwt/HJ5IaBX0c0Bm9bsF3zQpVAs082KfLvTrmOf8SHk4b8OFOCJMvu
asSl9J8DTo3LZwC1TNpbxvTj5k3OFhB8i16WT3lvdLv9QUxBwdUaG6WxUCZD/35C
CJnjut7n09ZbG4dfVxAVl7KubX1llpNBopbTQEyoHaaVfOvFDL5R2Gf7/YG9G0+x
aI4+rMmRt0KCTii7xjN63j88+YpGlTgrAZETzwxVolZGMOe74jGtCNQqlIBwPZI=
=I1ki
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 26 Nov 2015 16:40:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost-user-test: fix migration overlap test
Fix memory leak on error
Revert "vhost: send SET_VRING_ENABLE at start/stop"
tests/vhost-user-bridge: read command line arguments
tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
vhost-user: clarify start and enable
vhost-user: set link down when the char device is closed
pc: Don't set hw_version on pc-*-2.5
osdep: Change default value of qemu_hw_version() to "2.5+"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWVynlAAoJEL/70l94x66DcpQIAIyRx1xF3P1XyhYhWTK6Xdul
8pNs2PrlpyArqUBqoDbHK/IwnDWN1F49N/3tPEFE/71foIUKSJp8oF3J5m7SbXoQ
Nn19xKBpAZ1OMfpXxMbu3X2K+gr5XyPpeUzZWqDgDdDVPPf7Lt+NEabCPNTeKCJr
HZz73YO1Fvs3/6Llm8oBAC0IfW2jzMP6rABB2Tm+hOU7BZoy22eNuaPxZpO22oq5
CxDbc9wN2tbjGFW0Tp4N87D2QqOSxYpA4tSoUSHOtXBaoL7NM7aWinZIb3V/4sHk
Zqmn+nOvASMKEBinP03yw5LtzGkz4R7QOI2ytmD1DEJIjJ+RyS/rkQNtYnDc/J8=
=2/j1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Small patches, without the one that introduces -fwrapv.
# gpg: Signature made Thu 26 Nov 2015 15:48:53 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: kvm: Print warning when clearing mcg_cap bits
target-i386: kvm: Use env->mcg_cap when setting up MCE
target-i386: kvm: Abort if MCE bank count is not supported by host
virtio-scsi: don't crash without a valid device
target-sparc: fix 32-bit truncation in fpackfix
exec: remove warning about mempath and hugetlbfs
Revert "exec: silence hugetlbfs warning under qtest"
call bdrv_drain_all() even if the vm is stopped
MAINTAINERS: Update TCG CPU cores section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make sure that we actually have a device when checking the aio
context. Otherwise guests could trigger QEMU crashes.
Signed-off-by: "Eugene (jno) Dvurechenski" <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1448549135-6582-2-git-send-email-jno@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/ppc/spapr.c: Fix memory leak on error, it was introduced in bc09e0611
hw/acpi/memory_hotplug.c: Fix memory leak on error, it was introduced in 34f2af3d
Signed-off-by: Stefano Dong (董兴水) <opensource.dxs@aliyun.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 3a12f32229.
In case of live migration several queues can be enabled and not only the
first one. So informing backend that only the first queue is enabled is
wrong.
Reported-by: Thibaut Collet <thibaut.collet@6wind.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For the "main area on file, oob in memory" case, fix the shifts so that
we erase the correct number of pages.
Signed-off-by: Ricard Wanderlöf <ricardw@axis.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that qemu_hw_version() returns a fixed "2.5+" string instead
of QEMU_VERSION, we don't need to set hw_version on pc-*-2.5
explicitly.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This code has been dead for three years (since commit 7e7b7cba1).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The device's guest interface and its QEMU user interface are
flawed^Whotly debated. We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.
To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 5f81724d made PIO read requests async but didn't add the
relevant block_acct_failed() and block_acct_invalid() calls.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b87e09d61019c128139b6c999ed0c07f0674170.1448367341.git.berto@igalia.com
Signed-off-by: John Snow <jsnow@redhat.com>
The minimum RAM check logic for the Xiilnx EP108 was off by one,
which caused a false positive. Correct the logic to only print
warnings when the RAM is below 0x8000000.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: fba8112ca7b01efd72553332b8045ecf107b7662.1448021100.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"werror=report" would free the req in virtio_blk_handle_rw_error, we
mustn't write to it in that case.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448239280-15025-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/IfF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
# gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
qom: Clean up assertions to display values on failure
qom: Replace object property list with GHashTable
qom: Add a test case for complex property finalization
net: Convert net filter code to use object property iterators
ppc: Convert spapr code to use object property iterators
vl: Convert machine help code to use object property iterators
qmp: Convert QMP code to use object property iterators
qom: Introduce ObjectPropertyIterator struct for iteration
qdev: Change Property::offset field to ptrdiff_t type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWTc5PAAoJECgfDbjSjVRpCJEH/jh1CeWCG7zRBXelWK2F5Cgr
ls+V1sCX7NvkfCa3cDZI8imGjYQUr6EiXtqxPArEVMjmUOUzEHPkOx3ICPpfMU7o
RCVNPELav6VBhGDf3mcIVjlDDN9Syhd90xdgaD8dbeSA0UJFHRTdobNlYpYwiRmp
OAASUawEWLGA5cG+W6MBFWiPQWChpNRK3yK3RVduL71TIe4heuHBez4qTB2QKYvF
KM2nRvpkBY21frXJQqWPlCJ6jsdjI/Fl2xR1t4C9qv0TKcB9FESMmH3Jff2bwMQM
8OSnTIRqYaqT6kJkk3Kns8a+porJMnn69OwBRehLmLW/rmx9HQrR2Ey7bYtgd0Y=
=CrrY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ich calls acpi_gpe_init with length ICH9_PMIO_GPE0_LEN so
ICH9_PMIO_GPE0_LEN/2 bytes are allocated, but then the full
ICH9_PMIO_GPE0_LEN bytes are migrated.
As a quick work-around, allocate twice the memory.
We'll probably want to tweak code to avoid
migrating the extra ICH9_PMIO_GPE0_LEN/2 bytes,
but that is a bit trickier to do without breaking
migration compatibility.
Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Upon activating an interrupt, set the corresponding priority bit in the
APR/NSAPR registers without touching the currently set bits. In the event
of nested interrupts, the GIC will then have the information it needs to
restore the priority of the pre-empted interrupt once the higher priority
interrupt finishes execution.
Signed-off-by: François Baldassari <francois@pebble.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stop directly accessing the Object::properties field data
structure and instead use the formal object property iterator
APIs. This insulates the code from future data structure
changes in the Object struct.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit 2b8819c6ee
("vhost-user: modify SET_LOG_BASE to pass mmap size and offset")
passes log size in units of 4 byte chunks instead of the
expected size in bytes.
Fix this up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some features (such as ctrl vq) are supported
by qemu without need to communicate with the
backend.
Drop them from the feature mask so we set them
unconditionally.
Reported-by: Victor Kaplansky <vkaplans@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The shifts of the address mask and value shift beyond 32 bits when there
are 5 address cycles.
Cc: qemu-stable@nongnu.org
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the guests canceles a DMA request we can prematurely
invoke all callbacks of buffered requests and flag all them
as orphaned. Ideally this avoids the need for draining all
requests. For CDROM devices this works in 100% of all cases.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1447345846-15624-5-git-send-email-pl@kamp.de
Signed-off-by: John Snow <jsnow@redhat.com>
this patch adds a new aio readv compatible function which copies
all data through a bounce buffer. These buffered requests can be
flagged as orphaned which means that their original callback has
already been invoked and the request has just not been completed
by the backend storage. The bounce buffer guarantees that guest
memory corruption is avoided when such a orphaned request is
completed by the backend at a later stage.
This trick only works for read requests as a write request completed
at a later stage might corrupt data as there is no way to control
if and what data has already been written to the storage.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1447345846-15624-4-git-send-email-pl@kamp.de
Signed-off-by: John Snow <jsnow@redhat.com>
PIO read requests on the ATAPI interface used to be sync blk requests.
This has two significant drawbacks. First the main loop hangs util an
I/O request is completed and secondly if the I/O request does not
complete (e.g. due to an unresponsive storage) Qemu hangs completely.
Note: Due to possible race conditions requests during an ongoing
elementary transfer are still sync.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1447345846-15624-2-git-send-email-pl@kamp.de
Signed-off-by: John Snow <jsnow@redhat.com>
There's no indication of any sort that i440fx doesn't support
"iommu=on"
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
The helper function machine_iommu() isn't necesary. We can
directly check for the property.
Signed-off-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
When a request R is absorbed by request M, it is appended to the
"mr_next" queue led by M, and is completed together with the completion
of M, in virtio_blk_rw_complete.
During DMA restart in virtio_blk_dma_restart_bh, requests in s->rq are
parsed and submitted again, possibly with a stale req->mr_next. It could
be a problem if the request merging in virtio_blk_handle_request hasn't
refreshed every mr_next pointer, in which case, virtio_blk_rw_complete
could walk through unexpected requests following the stale pointers.
Fix this by unsetting the pointer in virtio_blk_rw_complete. It is safe
because this req is either completed and freed right away, or it will be
restarted and parsed from scratch out of the vq later.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
clang 3.7.0 on x86_64 warns about the following:
hw/tpm/tpm_tis.c:1000:36: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
tis->loc[c].iface_id = TPM_TIS_IFACE_ID_SUPPORTED_FLAGS1_3;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/tpm/tpm_tis.c:144:10: note: expanded from macro 'TPM_TIS_IFACE_ID_SUPPORTED_FLAGS1_3'
(~0 << 4)/* all of it is don't care */)
~~ ^
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are currently only sending VRING_ENABLE message for the first ring,
that's wrong: we must start/stop them all.
Reported-by: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we get an unexpected response, print out
the original request.
Helps debug protocol errors tremendously.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
First of all, RESET_OWNER message is sent incorrectly, as it's sent
before GET_VRING_BASE. And the reset message would let the later call
get nothing correct.
And, sending SET_VRING_ENABLE at stop, which has already been done,
makes more sense than RESET_OWNER.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
But not depend on PROTOCOL_F_MQ feature bit. So that we could use
SET_VRING_ENABLE to sign the backend on stop, even if MQ is disabled.
That's reasonable, since we will have one queue pair at least.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we don't know about the command at all, we need to prioritize
that failure above the zero byte-count-limit failure.
This fixes a failure in the sparc64 NetBSD 7.0 installer bootup.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1447095959-10046-3-git-send-email-jsnow@redhat.com
Due to the addition of HVMlite and the requirement to always provide a
valid xc_domain_configuration_t, xc_domain_create now always takes an arch
domain config, which can be NULL in order to mimic previous behaviour.
Add a small stub called xen_domain_create that encapsulates the correct
call to xc_domain_create depending on the libxc version detected.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=9mKZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches (rebased Stefan's pull request)
# gpg: Signature made Thu 12 Nov 2015 15:34:16 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (43 commits)
block: Update copyright of the accounting code
scsi-disk: Account for failed operations
macio: Account for failed operations
ide: Account for failed and invalid operations
atapi: Account for failed and invalid operations
xen_disk: Account for failed and invalid operations
virtio-blk: Account for failed and invalid operations
nvme: Account for failed and invalid operations
iotests: Add test for the block device statistics
block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode
qemu-io: Account for failed, invalid and flush operations
block: New option to define the intervals for collecting I/O statistics
block: Add average I/O queue depth to BlockDeviceTimedStats
block: Compute minimum, maximum and average I/O latencies
block: Allow configuring whether to account failed and invalid ops
block: Add statistics for failed and invalid I/O operations
block: Add idle_time_ns to BlockDeviceStats
util: Infrastructure for computing recent averages
block: define 'clock_type' for the accounting code
ide: Account for write operations correctly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a performance regression with virtio 1,
and makes device stop/start more robust for vhost-user.
virtio devices on pcie bus now have pcie and pm
capability, as required by the PCI Express spec.
migration now works better with virtio 9p.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWRKTqAAoJECgfDbjSjVRpHCsH/3HBYev+wwUxbxh2Z/TVTadK
uAOskZN5etuvl9guyLnE8iBYMHpDY/mHUrYEb7p/Yawmi7VWy3A/3ZMGJuMML3hq
/jM7oKhJyaBaHzVUX2WOIktiHihZxk8+Bwgmc8Ho301Mg5pnBiwdbEVhZU7BC/0g
M4I98EEW42u3t2zRo6IwOuEaiErevTdSd2ugmP37i25x3/VWcP7r0475NRnD0EcH
/kUDM0Kb75EOWWSj+aBDySBOWR//kW7t8KpcERolUslmf25os/fGoGMlpY5nr3M0
fraFXsKR3lvjUPZjQ9JUneOD3LaPdV+DjBh5mG+ob3MmO/dGUI3FkFaK1y+7ckA=
=RCs3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost: fixes for 2.5
This fixes a performance regression with virtio 1,
and makes device stop/start more robust for vhost-user.
virtio devices on pcie bus now have pcie and pm
capability, as required by the PCI Express spec.
migration now works better with virtio 9p.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 12 Nov 2015 14:40:42 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-9p: add savem handlers
hw/virtio: Add PCIe capability to virtio devices
vhost: send SET_VRING_ENABLE at start/stop
vhost: rename RESET_DEVICE backto RESET_OWNER
vhost-user: modify SET_LOG_BASE to pass mmap size and offset
virtio-pci: unbreak queue_enable read
virtio-pci: introduce pio notification capability for modern device
virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible
KVM: add support for any length io eventfd
memory: don't try to adjust endianness for zero length eventfd
virtio-pci: fix 1.0 virtqueue migration
Conflicts:
include/hw/compat.h
[Fixed a trivial merge conflict in compat.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently both BLKIF_OP_WRITE and BLKIF_OP_FLUSH_DISKCACHE are being
accounted as write operations.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7a2a14e3ac62027aa6267a6c02abc70717be9c0a.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't support migration of mounted 9p shares. This is handled by a
migration blocker.
One would expect, however, to be able to migrate if the share is unmounted.
Unfortunately virtio-9p-device does not register savevm handlers at all !
Migration succeeds and leaves the guest with a dangling device...
This patch simply registers migration handlers for virtio-9p-device. Whether
migration is possible or not still depends on the migration blocker.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio devices are converted to PCI-Express
if they are plugged into a PCI-Express bus and
the 'modern' protocol is enabled.
Devices plugged directly into the Root Complex as
Integrated Endpoints remain PCI.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWREdzAAoJEO8Ells5jWIRI18H/0CEDVwj7AJHLEpAv07hX2iS
jfq6Osgj5hDChv43+66Clz3owog3m9NfPKWxBMvIw5c/Q1mFvNuxZcUaVOzX2dT4
E+IwIsZxXOANIGPYtCxOhARz1zNSDxJxgYPMVuIDZ+uZVJqYeCjdduMGzgy8wt8H
qiquUCI2sktg97AntZqzp8iWfZZIN5w6uNbf3FvgwIffWDxGRPt8wY6dlwgIpsx2
uFd9PMwtj7lJyV9guy36FdrS7MhVTCF5/5GIerPj2nN1ByJp9vu5InzPAlmZNRSZ
KxKcBnmkLsnT3nDN86ZS6ajDyjeEgWSVdrQS9MHDURfinADuuqjbJkhME/UhG+g=
=vRNP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 12 Nov 2015 08:01:55 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: netmap: use error_setg() helpers in place of error_report()
net: netmap: Fix compilation issue
e1000: Introducing backward compatibility command line parameter
e1000: Implementing various counters
e1000: Fixing the packet address filtering procedure
e1000: Fixing the received/transmitted octets' counters
e1000: Fixing the received/transmitted packets' counters
e1000: Trivial implementation of various MAC registers
e1000: Introduced an array to control the access to the MAC registers
e1000: Add support for migrating the entire MAC registers' array
e1000: Cosmetic and alignment fixes
slirp: Fix type casts and format strings in debug code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Send SET_VRING_ENABLE at start/stop, to give the backend
an explicit sign of our state.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch basically reverts commit d1f8b30e.
It turned out that it breaks stuff, so revert it:
http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg00949.html
CC: "Michael S. Tsirkin" <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike the kernel, vhost-user application accesses log table by
mmaping it to its user space. This change adds two new fields to
VhostUserMsg payload: mmap_size, and mmap_offset and make QEMU to
pass the to vhost-user application in VHOST_USER_SET_LOG_BASE
request.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest always get zero when reading queue_enable. This violates
spec. Fixing this by setting the queue_enable to true during any guest
writing and setting it to zero during reset.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to use mmio for notification. This could be slow on some arch
(e.g on x86 without EPT). So this patch introduces pio bar and a pio
notification cap for modern device. This ability is enabled through
property "modern-pio-notify" for virtio pci devices and was disabled
by default. Management can enable when it thinks it was needed.
Benchmarks shows almost no obvious difference compared to legacy
device on machines without ept. Thanks Wenli Quan <wquan@redhat.com>
for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use data match eventfd for 1.0 notification currently. This could
be slow since software decoding is needed for mmio exit. To speed this
up, we can switch to use zero length mmio eventfd for 1.0 notification
since we can examine the queue index directly from the writing
address. KVM kernel module can utilize this by registering it to fast
mmio bus which could be as fast as pio on ept capable machine when
fast mmio is supported by host kernel.
Lots of improvements were seen on a ept capable machine:
Guest RX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/+1.6807%/[-16.2421%]/[+21.3984%]/
64/2/+0.6091%/[-11.0187%]/[+13.0678%]/
64/4/+0.0553%/[-5.9768%]/[+6.4155%]/
64/8/+0.1206%/[-4.0057%]/[+4.2984%]/
256/1/-0.0031%/[-10.1166%]/[+11.2517%]/
256/2/-0.5058%/[-6.1656%]/+6.0317%]/
...
Guest TX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/[+18.9183%]/-0.2823%/[+19.2550%]/
64/2/[+13.5714%]/[+2.2675%]/[+11.0533%]/
64/4/[+13.1070%]/[+2.1817%]/[+10.6920%]/
64/8/[+13.0426%]/[+2.0887%]/[+10.7299%]/
256/1/[+36.2761%]/+6.3434%/[+28.1471%]/
...
1024/1/[+44.8873%]/+2.0811%/[+41.9335%]/
...
1024/4/+0.0228%/[-2.2044%]/[+2.2774%]/
...
16384/2/+0.0127%/[-5.0346%]/[+5.3148%]/
...
65535/1/[+0.0062%]/[-4.1183%]/[+4.3017%]/
65535/2/+0.0004%/[-4.2311%]/[+4.4185%]/
65535/4/+0.0107%/[-4.6106%]/[+4.8446%]/
65535/8/-0.0090%/[-5.5178%]/[+5.8306%]/
Latency:(TCP_RR)
size/session/+transaction rate%/+cpu%/-+per cpu%/
64/1/[+6.5248%]/[-9.2882%]/[+17.4322%]/
64/25/[+11.0854%]/[+0.8000%]/[+10.2038%]/
64/50/[+12.1076%]/[+2.4627%]/[+9.4131%]/
256/1/[+5.3677%]/[+10.5669%]/-4.7024%/
256/25/[+5.6402%]/-0.8962%/[+6.5955%]/
256/50/[+5.9685%]/[+1.7766%]/[+4.1188%]/
4096/1/+0.2508%/[-10.4941%]/[+12.0047%]/
4096/25/[+1.8533%]/-0.0273%/+1.8812%/
4096/50/[+1.2156%]/-1.4134%/+2.6667%/
Notes: data with '[]' is the one whose significance is greater than 95%.
Thanks Wenli Quan <wquan@redhat.com> for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't migrate the followings fields for virtio-pci:
uint32_t dfselect;
uint32_t gfselect;
uint32_t guest_features[2];
struct {
uint16_t num;
bool enabled;
uint32_t desc[2];
uint32_t avail[2];
uint32_t used[2];
} vqs[VIRTIO_QUEUE_MAX];
This will confuse driver if migrating during initialization. Solves
this issue by:
- introduce transport specific callbacks to load and store extra
virtqueue states.
- add a new subsection for virtio to migrate transport specific modern
device state.
- implement pci specific callbacks.
- add a new property for virtio-pci for whether or not to migrate
extra state.
- compat the migration for 2.4 and elder machine types
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Highlights:
- A number of fixes for MacOS 9 compatibility based on the old MOL
(Mac-On-Linux) code and a GSoC project.
- Cleaner and more general way of handling register access from the
monitor
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ayjU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-next-20151112' into staging
ppc patch queue -2015-11-12
Highlights:
- A number of fixes for MacOS 9 compatibility based on the old MOL
(Mac-On-Linux) code and a GSoC project.
- Cleaner and more general way of handling register access from the
monitor
# gpg: Signature made Thu 12 Nov 2015 04:33:26 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-next-20151112:
monitor/target-ppc: Define target_get_monitor_def
cuda.c: add delay to setting of SR_INT bit
cuda.c: fix T2 timer and enable its interrupt
cuda.c: rename get_counter() state variable from s to ti for consistency
cuda.c: refactor get_tb() so that the time can be passed in
cuda.c: add defines for CUDA registers
cuda.c: fix CUDA SR interrupt clearing
cuda.c: implement dummy IIC access commands
cuda.c: implement simple CUDA_GET_6805_ADDR command
cuda.c: fix CUDA_PACKET response packet format
cuda.c: fix CUDA ADB error packet format
PPC: mac99: Always add USB controller
PPC: Fix lswx bounds checks
PPC: Allow Rc bit to be set on mtspr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This follows the previous patches, where support for migrating the
entire MAC registers' array, and some new MAC registers were introduced.
This patch introduces the e1000-specific boolean parameter
"extra_mac_registers", which is on by default. Setting it to off will
enable migration to older versions of QEMU, but will disable the read
and write access to the new registers, that were introduced since adding
the ability to migrate the entire MAC array.
Example for usage to enable backward compatibility and to disable the
new MAC registers:
qemu-system-x86_64 -device e1000,extra_mac_registers=off,... ...
As mentioned above, the default value is "on".
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This implements the following Statistic registers (various counters)
according to Intel's specs:
TSCTC GOTCL GOTCH GORCL GORCH MPRC BPRC RUC ROC
BPTC MPTC PTC... PRC...
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in the next patch in this series).
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, if promiscuous unicast was enabled, a packet was received
straight away, even if it was a multicast or a broadcast packet. This
patch fixes that behavior, while making the filtering procedure a bit
more human-readable.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, these 64-bit registers did not stick at their maximal
values when (and if) they reached them, as they should do, according to
the specs.
This patch introduces a function that takes care of such registers,
avoiding code duplication, making the relevant parts more compatible
with the QEMU coding style, while ensuring that in the unlikely case
of reaching the maximal value, the counter will stick there, as it
supposed to.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to Intel's specs, these counters (as the other Statistic
registers) stick at 0xffffffff when this maximal value is reached.
Previously, they would reset after the max. value.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These registers appear in Intel's specs, but were not implemented.
These registers are now implemented trivially, i.e. they are initiated
with zero values, and if they are RW, they can be written or read by the
driver, or read only if they are R (essentially retaining their zero
values). For these registers no other procedures are performed.
For the trivially implemented Diagnostic registers, a debug warning is
produced on read/write attempts.
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in a later patch in this series).
The registers implemented here are:
Transmit:
RW: AIT
Management:
RW: WUC WUS IPAV IP6AT* IP4AT* FFLT* WUPM* FFMT* FFVT*
Diagnostic:
RW: RDFH RDFT RDFHS RDFTS RDFPC PBM* TDFH TDFT TDFHS
TDFTS TDFPC
Statistic:
RW: FCRUC
R: RNBC TSCTFC MGTPRC MGTPDC MGTPTC RFC RJC SCC ECOL
LATECOL MCC COLC DC TNCRS SEC CEXTERR RLEC XONRXC
XONTXC XOFFRXC XOFFTXC
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The array of uint8_t's which is introduced here, contains access metadata
about the MAC registers: if a register is accessible, but partly implemented,
or if a register requires a certain compatibility flag in order to be
accessed. Currently, 6 hypothetical flags are supported (3 exist for e1000
so far) but in the future, if more than 6 flags will be needed, the datatype
of this array can simply be swapped for a larger one.
This patch is intended to solve the following current problems:
1) In a scenario of migration between different versions of QEMU, which
differ by the MAC registers implemented in them, some registers need not to
be active if a compatibility flag is set, in order to preserve the machine's
state perfectly for the older version. Checking this for each register
individually, would create a lot of clutter in the code.
2) Some registers are (or may be) only partly implemented (e.g.
placeholders that allow reading and writing, but lack other functions).
In such cases it is better to print a debug warning on read/write attempts.
As above, dealing with this functionality on a per-register level, would
require longer and more messy code.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch makes the migration of the entire array of MAC registers
possible during live migration. The entire array is just 128 KB long, so
practically no penalty should be felt when transmitting it, additionally
to the previously transmitted individual registers. The advantage here is
eliminating the need to introduce new vmstate subsections in the future,
when additional MAC registers will be implemented.
Backward compatibility is preserved by introducing a e1000-specific
boolean parameter (in a later patch), which will be on by default.
Setting it to off would enable migration to older versions of QEMU.
Additionally, this parameter will be used to control the access to the
extra MAC registers in the future.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This fixes some alignment and cosmetic issues. The changes are made
in order that the following patches in this series will look like
integral parts of the code surrounding them, while conforming to the
coding style. Although some changes in unrelated areas are also made.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for sharing the code between timers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that we also clear the data and clock interrupts at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:
Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)
Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mac99 machines always have a USB controller. Usually not having one around
doesn't hurt quite as much, but Mac OS 9 really really wants one or it crashes
on bootup.
So always add OHCI to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since. Nuke them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The non-ccw machine for s390 (s390-virtio) is not very well maintained
and caused several issues in the past:
- aliases like virtio-blk did not work for s390
- virtio refactoring failed due to long standing bugs (e.g.see
commit cb927b8a "s390-virtio: Accommodate guests using virtqueues too early")
- some features like memory hotplug will cause trouble due to virtio storage
being above guest memory
- the boot loader bios no longer seems to work. the source code of that
loader is also no longer maintained
2.4 changed the default to the ccw machine, let's deprecate the old
machine for 2.5.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1446811645-25565-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that we can report errors in the realize function, let's replace
the fprintf's and hw_error's with error_setg.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the qom definitions of the ipl device into ipl.h, replace
"s390-ipl" by a proper type define, turn it into a TYPE_DEVICE
and remove the unneeded class definition.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For TYPE_DEVICE, the dc->reset() function is not called on system resets
yet. Until that is changed, we have to manually register a reset handler.
Let's provide qdev_reset_all_fn(), that can directly be used - just like
the reset handler that is already available for qbus.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
By replacing memory_region_init_ram with memory_region_allocate_system_memory
we gain goodies like mem-path backends. This will allow us to use hugetlbfs
once the kernel supports it.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On s390x, each pci device has its own iommu, which is only properly
setup in qemu once the mpcifc instruction used to register the
translation table has been intercepted. Therefore, for a pci device that
is not configured or has not been initialized, proper translation is
neither required nor possible. Moreover, we may not have a host bridge
device ready yet.
This was exposed by a recent vfio change that triggers iommu translation
during the initialization of the vfio pci device. Let's do an early exit
in that case.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We keep the device's sense data in a byte array (following the
architecture), but the ecws are an array of 32 bit values. If we
just blindly copy the values, the sense data will change from
de-facto BE data to de-facto cpu-endian data, which means we end
up doing an incorrect conversion on LE hosts.
Let's just explicitly convert to cpu-endianness while assembling
the irb.
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM_PPC_ALLOCATE_HTAB ioctl can return -ENOMEM for KVM guests and QEMU
never handled this correctly. But this didn't cause any problems till
now as KVM_PPC_ALLOCATE_HTAB ioctl returned with smaller than requested
HTAB when enough contiguous memory wasn't available in the host.
After the proposed kernel change: https://patchwork.ozlabs.org/patch/530501/,
KVM_PPC_ALLOCATE_HTAB ioctl will not fallback to lower sized HTAB
allocation and will fail if requested HTAB size can't be met.
Check for such failures in QEMU and abort appropriately. This will
prevent guest kernel from hanging/freezing during early boot by doing
graceful exit when host is unable to allocate requested HTAB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Make Windows happy with vfio-pci devices exposed on conventional
PCI buses on q35 by hiding PCIe capability (Alex Williamson)
- Convert to g_new() where appropriate (Markus Armbruster)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qJ77
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20151110.0' into staging
VFIO updates 2015-11-10
- Make Windows happy with vfio-pci devices exposed on conventional
PCI buses on q35 by hiding PCIe capability (Alex Williamson)
- Convert to g_new() where appropriate (Markus Armbruster)
# gpg: Signature made Tue 10 Nov 2015 19:46:41 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20151110.0:
vfio: Use g_new() & friends where that makes obvious sense
vfio/pci: Hide device PCIe capability on non-express buses for PCIe VMs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When we have a PCIe VM, such as Q35, guests start to care more about
valid configurations of devices relative to the VM view of the PCI
topology. Windows will error with a Code 10 for an assigned device if
a PCIe capability is found for a device on a conventional bus. We
also have the possibility of IOMMUs, like VT-d, where the where the
guest may be acutely aware of valid express capabilities on physical
hardware.
Some devices, like tg3 are adversely affected by this due to driver
dependencies on the PCIe capability. The only solution for such
devices is to attach them to an express capable bus in the VM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tlQv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151110' into staging
migration/next for 20151110
# gpg: Signature made Tue 10 Nov 2015 14:23:26 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151110: (57 commits)
migration: qemu_savevm_state_cleanup becomes mandatory operation
Inhibit ballooning during postcopy
Disable mlock around incoming postcopy
End of migration for postcopy
Postcopy: Mark nohugepage before discard
postcopy: Wire up loadvm_postcopy_handle_ commands
Start up a postcopy/listener thread ready for incoming page data
Postcopy; Handle userfault requests
Round up RAMBlock sizes to host page sizes
Host page!=target page: Cleanup bitmaps
Don't iterate on precopy-only devices during postcopy
Don't sync dirty bitmaps in postcopy
postcopy: Check order of received target pages
Postcopy: Use helpers to map pages during migration
postcopy_ram.c: place_page and helpers
Page request: Consume pages off the post-copy queue
Page request: Process incoming page request
Page request: Add MIG_RP_MSG_REQ_PAGES reverse command
Postcopy: End of iteration
Postcopy: Postcopy startup in migration thread
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Postcopy detects accesses to pages that haven't been transferred yet
using userfaultfd, and it causes exceptions on pages that are 'not
present'.
Ballooning also causes pages to be marked as 'not present' when the
guest inflates the balloon.
Potentially a balloon could be inflated to discard pages that are
currently inflight during postcopy and that may be arriving at about
the same time.
To avoid this confusion, disable ballooning during postcopy.
When disabled we drop balloon requests from the guest. Since ballooning
is generally initiated by the host, the management system should avoid
initiating any balloon instructions to the guest during migration,
although it's not possible to know how long it would take a guest to
process a request made prior to the start of migration.
Guest initiated ballooning will not know if it's really freed a page
of host memory or not.
Queueing the requests until after migration would be nice, but is
non-trivial, since the set of inflate/deflate requests have to
be compared with the state of the page to know what the final
outcome is allowed to be.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1446909925-12201-1-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Firstly, enable monitor mode and PSCI, both of which are features of
this board.
In addition to PSCI, this board also uses SMC for cache maintenance
ops. This means we need a secure monitor to catch these and nop them.
Use the ARM boot board-setup feature to implement this. The SMC trap
implements the needed nop while all other traps will pen the CPU.
As a KVM CPU cannot run in secure mode, do not do the board-setup if
not running TCG. Report a warning explaining the limitation in this
case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 0fd0d12f0fa666c86616c89447861a70dbe27312.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This board should not support CPU model override. This allows for
easier patching of the board with being able to rely on the CPU
type being correct.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 471a61e049c7ca6e82f5ef6668889a1d518c7e00.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a flag that when set, will cause the primary CPU to start in secure
mode, even if the overall boot is non-secure. This is useful for when
there is a board-setup blob that needs to run from secure mode, but
device and secondary CPU init should still be done as-normal for a non-
secure boot.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d1170774d5446d715fced7739edfc61a5be931f9.1447007690.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_gic.c retrieves CPU number using either NUM_CPU(s) or s->num_cpu.
Such mixed-uses make source code inconsistent. This patch removes
NUM_CPU(s), which was defined for MPCore tweak long ago, and instead
favors s->num_cpu. The source is more consistent after this small tweak.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1446744293-32365-1-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed integer overflow in C is undefined behaviour, and the compiler
is at liberty to assume it can never happen and optimize accordingly.
In particular, the subtractions in hpet_time_after() and hpet_time_after64()
were causing OSX clang to optimize the code such that it was prone to
hangs and complaints about the main loop stalling (presumably because
we were spending all our time trying to service very high frequency
HPET timer callbacks). The clang sanitizer confirms the UB:
hw/timer/hpet.c:119:26: runtime error: signed integer overflow: -2146967296 - 2147003978 cannot be represented in type 'int'
Fix this by doing the subtraction as an unsigned operation and then
converting to signed for the comparison.
Reported-by: Aaron Elkins <threcius@yahoo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447080991-24995-1-git-send-email-peter.maydell@linaro.org
bring_map currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space. Introduce a mapped_len
parameter so it can handle this, returning the actual mapped length.
This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.
Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.
Let's hope these are uncommon - at least we are not breaking things.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-2-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use address_space_read to make sure we handle the case of an indirect
descriptor crossing DIMM boundary correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a Sysbus AHCI subclass for the Allwinner AHCI. It has a few extra
vendor specific registers which are used for phy and power init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 833b5b05ed5ade38bf69656679b0a7575e79492b.1445917756.git.crosthwaite.peter@gmail.com
[resolved patch context on pull --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Do the init level tasks asap and the realize later (mainly when
num_ports is available). This allows sub-class realize routines
to work with the device post-init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1a7c7b2b32e5ccf49373a5065da5ece89730d3ac.1445917756.git.crosthwaite.peter@gmail.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not that you can request a >2GiB transaction, but that's why checking
for it makes no sense anymore.
With the newer 'limit' parameter to prepare_buf, we no longer need a
static limit. The maximum limit is still 2GiB, but the limit parameter
is set to the current transaction size, which cannot surpass 32MiB
(512 * 65536). If the PRDT surpasses the transactional size, then,
we'll just carry out the normative underflow handling pathways instead
of needing an extra, strange pathway that worries about hitting some
logistical cap for the largest sglist we can support -- we'll never
even attempt to build one that big anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1445902682-20051-1-git-send-email-jsnow@redhat.com
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
In this case we can get the same error from fopen(), so just use
strerror and errno there---which actually improves the error
message most of the time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sdp_svc_match, sdp_attr_match and sdp_svc_attr_match read the last
argument. The only sensible way to change the code is to make that last
argument "len" instead of "seqlen" which is the length of a subsequence
in the previous "if" branch.
To make the structure of the code clearer, use "else" instead of
"else if".
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_malloc0 already clears the memory, so no need for
the additional memset here. And while we're at it,
also convert the g_malloc0 to the preferred g_new0.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_malloc0 already clears the memory, so no need for additional
memsets here. And while we're at it, let's also remove the
superfluous typecasts for the return values of g_malloc0
and use the type-safe g_new0 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Asserting "true" is not that useful.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tcx_initfn() function is already supplied with an
Object *obj pointer, so there is no need to cast the
state pointer back to an Object pointer all over the
place. And while we're at it, also remove the superfluous
"return;" statement in this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWPHM6AAoJEL/70l94x66DK5YIAJTNthYWL8eNhQ1iek6CLlV+
etVXm3JDmkV0zOfYVHLBb44VLZ6I1ocas+57F/kmz7SKpMLiI6bMXRxhTSkiO4D+
3N36cWQf3fq+P0DmxuikMlYGz8V6QQ5PQE2xJKV0ZIWAkiqInxilkN3qt81sNR+A
A9Ohom3sc0eGHyYJcVDK4krbnNSAZjIB2yMWperw61x+GYAhxjA02HPUgB32KK6q
KrdnKmnRu9Cw6y4wTCbbDITJztPexZYsX2DOJh30wC0eNcE+MZ7J2im8Frpxe+Ml
C8MUuvSqLOyeu9tUfrXGzd6kMtEKrmU+fh2nNbxJbtfowDjkW2jcIEgC0UjkGE4=
=BF1q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into staging
So here it is, let's see what happens.
# gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream-replay:
replay: recording of the user input
replay: command line options
replay: replay blockers for devices
replay: initialization and deinitialization
replay: ptimer
bottom halves: introduce bh call function
replay: checkpoints
icount: improve counting for record/replay
replay: shutdown event
replay: recording and replaying clock ticks
replay: asynchronous events infrastructure
replay: interrupts and exceptions
cpu: replay instructions sequence
cpu-exec: allow temporary disabling icount
replay: introduce icount event
replay: introduce mutex to protect the replay log
replay: internal functions for replay log
replay: global variables and function stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch adds deterministic replay for hardware periodic countdown timers.
ptimer uses bottom halves layer to execute such an asynchronous callback.
We put this callback into the replay queue instead of bottom halves one.
When checkpoint is met by main loop thread, the replay queue is processed
and callback is executed. Binding callback moment to one of the checkpoints
makes it deterministic.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162456.8676.83366.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
The commit 317b0a6d8 fixed an issue which caused by the outdated
env->tsc value, but the fix lead to 'cpu_synchronize_all_states()'
called twice during live migration. The 'cpu_synchronize_all_states()'
takes about 130us for a VM which has 4 vcpus, it's a bit expensive.
Synchronize the whole CPU context just for updating env->tsc is too
wasting, this patch use a new function to update the env->tsc.
Comparing to 'cpu_synchronize_all_states()', it only takes about 20us.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1446695464-27116-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest visible data shouldn't change with a simple QEMU upgrade, so use
qemu_hw_version() to ensure it won't change (as long as the machine
class being used has hw_version set).
Cc: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-4-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the purpose of the function clearer: it is not about the
version of QEMU that's running, but the version string exposed in the
emulated hardware.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 2012, QEMU had a bug where it exposed QEMU version information to the
guest, meaning a QEMU upgrade would expose different hardware to the
guest OS even if the same machine-type is being used.
The bug was fixed by commit 93bfef4c6e, on
all machines up to pc-1.0. But we kept introducing the same bug on all
newer machines since then. That means we are breaking guest ABI every
time QEMU was upgraded.
Fix this by setting the hw_version on all PC machines, making sure the
hardware won't change when upgrading QEMU.
Note that QEMU_VERSION was "1.0" in QEMU 1.0, but starting on QEMU
1.1.0, it started following the "x.y.0" pattern. We have to follow it,
to make sure we use the right QEMU_VERSION string from each QEMU
release.
The 2.5 machine classes could have hw_version unset, because the default
value for qemu_get_version() is QEMU_VERSION. But I decided to set it
explicitly to QEMU_VERSION so we don't forget to update it to "2.5.0"
after we release 2.5.0 and create a 2.6 machine class.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* code cleanup to use symbolic constants for register bank numbers
* fix direct booting of modern Linux kernels on xilinx_zynq by setting
SCLR values to what the kernel expects firmware to have done
* implement SYSRESETREQ for ARMv7M CPU (stellaris boards)
* update MAINTAINERS to mention new qemu-arm mailing list
* clean up display of PSTATE in AArch64 debug logs
* report Secure/Nonsecure status in CPU debug logs
* fix a missing _CCA attribute in ACPI tables
* add support for GICv3 to ACPI tables
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5aa4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151103' into staging
target-arm queue:
* code cleanup to use symbolic constants for register bank numbers
* fix direct booting of modern Linux kernels on xilinx_zynq by setting
SCLR values to what the kernel expects firmware to have done
* implement SYSRESETREQ for ARMv7M CPU (stellaris boards)
* update MAINTAINERS to mention new qemu-arm mailing list
* clean up display of PSTATE in AArch64 debug logs
* report Secure/Nonsecure status in CPU debug logs
* fix a missing _CCA attribute in ACPI tables
* add support for GICv3 to ACPI tables
# gpg: Signature made Tue 03 Nov 2015 13:58:46 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20151103:
ARM: ACPI: Fix MPIDR value in ACPI table
hw/arm/virt-acpi-build: Add GICC ACPI subtable for GICv3
hw/arm/virt-acpi-build: _CCA attribute is compulsory
target-arm: Report S/NS status in the CPU debug logs
target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32
MAINTAINERS: Add new qemu-arm mailing list to ARM related entries
arm: stellaris: exit on external reset request
armv7-m: Implement SYSRESETREQ
armv7-m: Return DeviceState* from armv7m_init()
arm: xilinx_zynq: Add linux pre-boot
arm: boot: Add board specific setup code API
arm: boot: Adjust indentation of FIXUP comments
target-arm: Add and use symbolic names for register banks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use mp_affinity of ARMCPU as the CPU MPIDR instead of the CPU index.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446285001-7316-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting VM with GICv3, the kernel needs GICC ACPI subtable to
initialize the CPUs, e.g. MPIDR information. This adds GICC ACPI
subtable for GICv3, but set GICC base address only when gic_version == 2
since it donesn't need GICC base address for GICv3.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446131773-5018-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI specification 6.2.17 _CCA (Cache Coherency Attribute)
this attribute is compulsory on ARM systems. Add this attribute to
the PCI host bridges as required.
Without this the kernel will produce the error
[Firmware Bug]: PCI device 0000:00:00.0 fail to setup DMA.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Message-id: 1446460786-13663-1-git-send-email-graeme.gregory@linaro.org
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GPIO in for the stellaris board which calls
qemu_system_reset_request() on reset request.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SYSRESETREQ bit of the AIRCR register
for armv7-m (ie. cortex-m3) to trigger a GPIO out.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These comments start immediately after the current longest name in the
list. Tab them out to the next tab stop to give a little breathing room
and prepare for FIXUP_BOARD_SETUP which will require more indent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
usb->speed is the usb speed the device is actually running on in the
qemu emulation (i.e. from the guests point of view). So when plugging
usb3 devices into ehci hostadapter this is HIGH not SUPER.
To figure whenever the host talks to the device with superspeed we
have to check speedmask instead and see whenever the superspeed bit
is set there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1445603230-11840-1-git-send-email-kraxel@redhat.com
When a device is detached, clear the suspend bit (PORTSC_SUSPEND)
in the port status register.
The specs are not *that* clear what is supposed to happen in case
a suspended device is unplugged. But the enable bit (PORTSC_PED)
is cleared, and the specs mention setting suspend with enable being
unset is undefined behavior. So clearing them both looks reasonable,
and it actually fixes the reported bug.
https://bugzilla.redhat.com/show_bug.cgi?id=1268879
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1445413462-18004-1-git-send-email-kraxel@redhat.com
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.
Tested with epoxy-1.3.1.
- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy
(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ lm32 tested by kraxel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for memory-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for input-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWMmDMAAoJEJykq7OBq3PIHkIIAKyL9iY4EipKrtdMoWZu/Kfm
I9g4NVVqPF4QmTfYpZVxWglvBy0g0+2p1h4DQ5KheUNr7DV2uchSSsN38MWnEgH/
XTRpY858jcWx4sSAvYpz+kUVRBEtJJL8a/1aTBvYRxcbNE1X1lm72m7mm4KXGGud
PZ0fdj/UODHeoTOnMHddbs8Rs0kdHhlckl2Mfkz2dUgYAuZMK7xR7OIE7kOqWBcR
p5/I1Jq3wgmp267ZPVNS17u8Cff2PIElv0Z3Ouubixhhf+k5kvLBtgTbTJ81h7/4
NfmIRwsmAPhtnDSDXqFJ8KgwUYpGYYtPrK8DIXIWYwPdSjkIIdl1gNtc2CGyV3w=
=nA50
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Thu 29 Oct 2015 18:09:16 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
block: Consider all child nodes in bdrv_requests_pending()
target-arm: xlnx-zynqmp: Add sdhci support.
sdhci: Split sdhci.h for public and internal device usage
sd.h: Move sd.h to include/hw/sd/
virtio: sync the dataplane vring state to the virtqueue before virtio_save
gdb command: qemu handlers
virtio-blk: switch off scsi-passthrough by default
ppc/spapr: add 2.4 compat props
s390x: include HW_COMPAT_* props
qemu-gdb: add $qemu_coroutine_sp and $qemu_coroutine_pc
qemu-gdb: extract parts of "qemu coroutine" implementation
qemu-gdb: allow using glibc_pointer_guard() on core dumps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 71c199c81d ("mips_malta: provide ememsize env variable to
kernels") changed the meaning of loaderparams.ram_size to be the whole
of RAM rather than just the low part below where the boot code is placed
for KVM, but it didn't update the PC initialisation for KVM to use
ram_low_size. Fix that now.
Fixes: 71c199c81d ("mips_malta: provide ememsize env variable to kernels")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Add two SYSBUS_SDHCI devices for xlnx-zynqmp
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and
internal version (i.e hw/sd/sdhci-interna.h) based on register
declarations and object declaration.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create a sd directory under include/hw/ and move sd.h to
include/hw/sd/
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When creating snapshot with the dataplane enabled, the snapshot file gets
not the actual state of virtqueue, because the current state is stored in
VirtIOBlockDataPlane. Therefore, before saving snapshot need to sync
the dataplane vring state to the virtqueue. The dataplane will resume its
work at the next notify virtqueue.
When snapshot loads with loadvm we get a message:
VQ 0 size 0x80 Guest index 0x15f5 inconsistent with Host index 0x0:
delta 0x15f5
error while loading state for instance 0x0 of device
'0000:00:08.0/virtio-blk'
Error -1 while loading VM state
to reproduce the error I used the following hmp commands:
savevm snap1
loadvm snap1
qemu parameters:
--enable-kvm -smp 4 -m 1024 -drive file=/var/lib/libvirt/images/centos6.4.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,id=virtio-disk0 -set device.virtio-disk0.x-data-plane=on
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1445859777-2982-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Devices that are compliant with virtio-1 do not support scsi
passthrough any more (and it has not been a recommended setup
anyway for quite some time). To avoid having to switch it off
explicitly in newer qemus that turn on virtio-1 by default, let's
switch the default to scsi=false for 2.5.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1444991154-79217-4-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
HW_COMPAT_2_4 will become non-empty: prepare for it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1444991154-79217-3-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We want to inherit generic hw compat as well.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1444991154-79217-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case user want to cancel the hot-add operation, should roll back,
device_del the added function that still don`t work.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit aa8580cddf.
As described in
http://article.gmane.org/gmane.comp.emulators.qemu/371432
that commit causes linux guests to crash on memory hot-unplug.
The original problem it's trying to solve has now
been addressed within virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note: virtqueue_map already validates input
so virtio-scsi does not have to.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This also fixes a minor bug:
- virtqueue_map_sg(port->elem.out_sg, port->elem.out_addr,
- port->elem.out_num, 1);
is wrong: out_sg is not written so should not be marked dirty.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Eduardo Habkost