p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/net/phy/Kconfig

444 lines
12 KiB
Plaintext
Raw Normal View History

This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
#
# PHY Layer Configuration
#
net: phy: Allow splitting MDIO bus/device support from PHYs Introduce a new configuration symbol: MDIO_DEVICE which allows building the MDIO devices and bus code, without pulling in the entire Ethernet PHY library and devices code. PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are updated to reflect that. When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we have mdio-bus.ko as a loadable module, and it does not have a module_exit() function because the safety of removing a bus class is unclear. When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble everything into a common loadable module: libphy.ko because of nasty circular dependencies between phy.c, phy_device.c and mdio_bus.c which are really tough to untangle. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 01:01:19 +08:00
menuconfig MDIO_DEVICE
tristate "MDIO bus device drivers"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
help
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
MDIO devices and driver infrastructure code.
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 23:49:55 +08:00
net: phy: rework Kconfig settings for MDIO_BUS I still see build errors in randconfig builds and have had this patch for a while to locally work around it: drivers/built-in.o: In function `xgene_mdio_probe': mux-core.c:(.text+0x352154): undefined reference to `of_mdiobus_register' mux-core.c:(.text+0x352168): undefined reference to `mdiobus_free' mux-core.c:(.text+0x3521c0): undefined reference to `mdiobus_alloc_size' The idea is that CONFIG_MDIO_BUS now reflects whether the mdio_bus code is built-in or a module, and other drivers that use the core code can simply depend on that, instead of having a complex dependency line. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-26 23:13:59 +08:00
config MDIO_BUS
tristate
net: phy: Fix modular PHYLIB build After commit c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") we made net/core/ethtool.c reference symbols which are part of the library which can be modular. David introduced a temporary fix with 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") which would prevent such modularity. This is not desireable of course, so instead, just inline the functions into include/linux/phy.h to keep both options available. Fixes: c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") Fixes: 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-28 03:41:49 +08:00
default m if PHYLIB=m
net: phy: rework Kconfig settings for MDIO_BUS I still see build errors in randconfig builds and have had this patch for a while to locally work around it: drivers/built-in.o: In function `xgene_mdio_probe': mux-core.c:(.text+0x352154): undefined reference to `of_mdiobus_register' mux-core.c:(.text+0x352168): undefined reference to `mdiobus_free' mux-core.c:(.text+0x3521c0): undefined reference to `mdiobus_alloc_size' The idea is that CONFIG_MDIO_BUS now reflects whether the mdio_bus code is built-in or a module, and other drivers that use the core code can simply depend on that, instead of having a complex dependency line. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-26 23:13:59 +08:00
default MDIO_DEVICE
help
This internal symbol is used for link time dependencies and it
reflects whether the mdio_bus/mdio_device code is built as a
loadable module or built-in.
if MDIO_BUS
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BCM_IPROC
tristate "Broadcom iProc MDIO bus controller"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF_MDIO
help
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
phy: add AT803x driver This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-15 03:07:16 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BCM_UNIMAC
tristate "Broadcom UniMAC MDIO bus controller"
net: phy: Drop OF dependency for MDIO_BCM_UNIMAC The driver builds fine even with CONFIG_OF=n since we now have stubs that are provided. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-17 23:42:04 +08:00
depends on HAS_IOMEM
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
help
This module provides a driver for the Broadcom UniMAC MDIO busses.
This hardware can be found in the Broadcom GENET Ethernet MAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
phy: add am79c874 PHY support Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-18 19:03:05 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BITBANG
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Bitbanged MDIO buses"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
help
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
drive the relevant pins.
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
If in doubt, say N.
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BUS_MUX
tristate
depends on OF_MDIO
help
This module provides a driver framework for MDIO bus
multiplexers which connect one of several child MDIO busses
to a parent bus. Switching between child busses is done by
device specific drivers.
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BUS_MUX_BCM_IPROC
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom iProc based MDIO bus multiplexers"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
select MDIO_BUS_MUX
default ARCH_BCM_IPROC
help
This module provides a driver for MDIO bus multiplexers found in
iProc based Broadcom SoCs. This multiplexer connects one of several
child MDIO bus to a parent bus. Buses could be internal as well as
external and selection logic lies inside the same multiplexer.
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BUS_MUX_GPIO
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "GPIO controlled MDIO bus multiplexers"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on OF_GPIO && OF_MDIO
select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via GPIO lines. The multiplexer connects one of
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_BUS_MUX_MMIOREG
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "MMIO device-controlled MDIO bus multiplexers"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on OF_MDIO && HAS_IOMEM
select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via a simple memory-mapped device, like an FPGA.
The multiplexer connects one of several child MDIO busses to a
parent bus. Child bus selection is under the control of one of
the FPGA's registers.
phylib: add driver for Teranetics TN2020 Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 11:19:46 +08:00
net: mdio-mux-mmioreg: Can handle 8/16/32 bits registers This patch fix an old information that mdio-mux-mmioreg can only handle 8bit registers. This is not true anymore. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 19:56:03 +08:00
Currently, only 8/16/32 bits registers are supported.
[PATCH] phy: new SMSC LAN83C185 PHY driver new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-08 05:22:53 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_CAVIUM
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
tristate
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_GPIO
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "GPIO lib-based bitbanged MDIO buses"
net: phy: Allow compile test of GPIO consumers if !GPIOLIB The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22 02:58:00 +08:00
depends on MDIO_BITBANG
depends on GPIOLIB || COMPILE_TEST
[PATCH] 2.6.18: sb1250-mac: Broadcom PHY support This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03 23:18:13 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Supports GPIO lib-based MDIO busses.
[PATCH] 2.6.18: sb1250-mac: Broadcom PHY support This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03 23:18:13 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
To compile this driver as a module, choose M here: the module
will be called mdio-gpio.
config MDIO_HISI_FEMAC
tristate "Hisilicon FEMAC MDIO bus controller"
depends on HAS_IOMEM && OF_MDIO
help
This module provides a driver for the MDIO busses found in the
Hisilicon SoC that have an Fast Ethernet MAC.
net: phy: add I2C mdio bus Add an I2C MDIO bus bridge library, to allow phylib to access PHYs which are connected to an I2C bus instead of the more conventional MDIO bus. Such PHYs can be found in SFP adapters and SFF modules. Since PHYs appear at I2C bus address 0x40..0x5f, and 0x50/0x51 are reserved for SFP EEPROMs/diagnostics, we must not allow the MDIO bus to access these I2C addresses. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:08 +08:00
config MDIO_I2C
tristate
depends on I2C
help
Support I2C based PHYs. This provides a MDIO bus bridged
to I2C to allow PHYs connected in I2C mode to be accessed
using the existing infrastructure.
This is library mode.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_MOXART
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
tristate "MOXA ART MDIO interface support"
net: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST Those drivers build just fine with COMPILE_TEST, so make that possible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18 04:07:45 +08:00
depends on ARCH_MOXART || COMPILE_TEST
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
help
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
net: phy: mscc-miim: Add MDIO driver Add a driver for the Microsemi MII Management controller (MIIM) found on Microsemi SoCs. On Ocelot, there are two controllers, one is connected to the internal PHYs, the other one can communicate with external PHYs. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-15 04:04:55 +08:00
config MDIO_MSCC_MIIM
tristate "Microsemi MIIM interface support"
depends on HAS_IOMEM
help
This driver supports the MIIM (MDIO) interface found in the network
switches of the Microsemi SoCs
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MDIO_OCTEON
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Octeon and some ThunderX SOCs MDIO buses"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on 64BIT
net/phy: fix mdio-octeon dependency and build Fix build errors by making this driver depend on OF_MDIO, like several other similar drivers do. drivers/built-in.o: In function `octeon_mdiobus_remove': mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister' mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free' drivers/built-in.o: In function `octeon_mdiobus_probe': mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size' mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register' mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23 23:19:49 +08:00
depends on HAS_IOMEM && OF_MDIO
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
select MDIO_CAVIUM
help
This module provides a driver for the Octeon and ThunderX MDIO
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
net: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST Those drivers build just fine with COMPILE_TEST, so make that possible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18 04:07:45 +08:00
depends on ARCH_SUNXI || COMPILE_TEST
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
help
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
A12, A10s, etc.)
config MDIO_THUNDER
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "ThunderX SOCs MDIO buses"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on 64BIT
depends on PCI
select MDIO_CAVIUM
help
This driver supports the MDIO interfaces found on Cavium
ThunderX SoCs when the MDIO bus device appears as a PCI
device.
config MDIO_XGENE
tristate "APM X-Gene SoC MDIO bus controller"
drivers: net: phy: Correct duplicate MDIO_XGENE entry An extra entry for MDIO_XGENE got added during merging. Delete it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07 02:22:51 +08:00
depends on ARCH_XGENE || COMPILE_TEST
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
help
This module provides a driver for the MDIO busses found in the
APM X-Gene SoC's.
net: phy: Allow splitting MDIO bus/device support from PHYs Introduce a new configuration symbol: MDIO_DEVICE which allows building the MDIO devices and bus code, without pulling in the entire Ethernet PHY library and devices code. PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are updated to reflect that. When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we have mdio-bus.ko as a loadable module, and it does not have a module_exit() function because the safety of removing a bus class is unclear. When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble everything into a common loadable module: libphy.ko because of nasty circular dependencies between phy.c, phy_device.c and mdio_bus.c which are really tough to untangle. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 01:01:19 +08:00
endif
phylink: add phylink infrastructure The link between the ethernet MAC and its PHY has become more complex as the interface evolves. This is especially true with serdes links, where the part of the PHY is effectively integrated into the MAC. Serdes links can be connected to a variety of devices, including SFF modules soldered down onto the board with the MAC, a SFP cage with a hotpluggable SFP module which may contain a PHY or directly modulate the serdes signals onto optical media with or without a PHY, or even a classical PHY connection. Moreover, the negotiation information on serdes links comes in two varieties - SGMII mode, where the PHY provides its speed/duplex/flow control information to the MAC, and 1000base-X mode where both ends exchange their abilities and each resolve the link capabilities. This means we need a more flexible means to support these arrangements, particularly with the hotpluggable nature of SFP, where the PHY can be attached or detached after the network device has been brought up. Ethtool information can come from multiple sources: - we may have a PHY operating in either SGMII or 1000base-X mode, in which case we take ethtool/mii data directly from the PHY. - we may have a optical SFP module without a PHY, with the MAC operating in 1000base-X mode - the ethtool/mii data needs to come from the MAC. - we may have a copper SFP module with a PHY whic can't be accessed, which means we need to take ethtool/mii data from the MAC. Phylink aims to solve this by providing an intermediary between the MAC and PHY, providing a safe way for PHYs to be hotplugged, and allowing a SFP driver to reconfigure the serdes connection. Phylink also takes over support of fixed link connections, where the speed/duplex/flow control are fixed, but link status may be controlled by a GPIO signal. By avoiding the fixed-phy implementation, phylink can provide a faster response to link events: fixed-phy has to wait for phylib to operate its state machine, which can take several seconds. In comparison, phylink takes milliseconds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> - remove sync status - rework supported and advertisment handling - add 1000base-x speed for fixed links - use functionality exported from phy-core, reworking __phylink_ethtool_ksettings_set for it Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:13 +08:00
config PHYLINK
tristate
depends on NETDEVICES
select PHYLIB
select SWPHY
help
PHYlink models the link between the PHY and MAC, allowing fixed
configuration links, PHYs, and Serdes links with MAC level
autonegotiation modes.
net: phy: Kconfig: Fix PHY infrastructure menu in menuconfig Since the integration of PHYLINK, the configuration option which used to be under the PHY infrastructure menu in menuconfig ended up one level up (the network device driver section) By placing PHYLINK option right after PHYLIB entry, it broke the way Kconfig used to build the menu. See kconfig-language.txt, section "Menu structure", 2nd method. This is fixed by placing the PHYLINK option just before PHYLIB. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 20:59:20 +08:00
menuconfig PHYLIB
net: phy: Fix modular PHYLIB build After commit c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") we made net/core/ethtool.c reference symbols which are part of the library which can be modular. David introduced a temporary fix with 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") which would prevent such modularity. This is not desireable of course, so instead, just inline the functions into include/linux/phy.h to keep both options available. Fixes: c59530d0d5dc ("net: Move PHY statistics code into PHY library helpers") Fixes: 1ecd6e8ad996 ("phy: Temporary build fix after phylib changes.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-28 03:41:49 +08:00
tristate "PHY Device support and infrastructure"
net: phy: Kconfig: Fix PHY infrastructure menu in menuconfig Since the integration of PHYLINK, the configuration option which used to be under the PHY infrastructure menu in menuconfig ended up one level up (the network device driver section) By placing PHYLINK option right after PHYLIB entry, it broke the way Kconfig used to build the menu. See kconfig-language.txt, section "Menu structure", 2nd method. This is fixed by placing the PHYLINK option just before PHYLIB. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 20:59:20 +08:00
depends on NETDEVICES
select MDIO_DEVICE
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
managing PHY devices.
net: phy: Allow splitting MDIO bus/device support from PHYs Introduce a new configuration symbol: MDIO_DEVICE which allows building the MDIO devices and bus code, without pulling in the entire Ethernet PHY library and devices code. PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are updated to reflect that. When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we have mdio-bus.ko as a loadable module, and it does not have a module_exit() function because the safety of removing a bus class is unclear. When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble everything into a common loadable module: libphy.ko because of nasty circular dependencies between phy.c, phy_device.c and mdio_bus.c which are really tough to untangle. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 01:01:19 +08:00
if PHYLIB
config SWPHY
bool
config LED_TRIGGER_PHY
bool "Support LED triggers for tracking link state"
depends on LEDS_TRIGGERS
---help---
Adds support for a set of LED trigger events per-PHY. Link
state change will trigger the events, for consumption by an
LED class driver. There are triggers for each link speed currently
net: phy: leds: Add support for "link" trigger Currently, we create a LED trigger for any link speed known to a PHY. These triggers only fire when their exact link speed had been negotiated (they aren't cumulative, that is, they don't fire for "their or any higher" link speed). What we are missing, however, is a trigger which will fire on any link speed known to the PHY. Such trigger can then be used for implementing a poor man's substitute of the "link" LED on boards that lack it. Let's add it. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 07:49:18 +08:00
supported by the PHY and also a one common "link" trigger as a
logical-or of all the link speed ones.
All these triggers are named according to the following pattern:
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
<mii bus id>:<phy>:<speed>
net: phy: Allow splitting MDIO bus/device support from PHYs Introduce a new configuration symbol: MDIO_DEVICE which allows building the MDIO devices and bus code, without pulling in the entire Ethernet PHY library and devices code. PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are updated to reflect that. When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we have mdio-bus.ko as a loadable module, and it does not have a module_exit() function because the safety of removing a bus class is unclear. When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble everything into a common loadable module: libphy.ko because of nasty circular dependencies between phy.c, phy_device.c and mdio_bus.c which are really tough to untangle. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 01:01:19 +08:00
Where speed is in the form:
net: phy: leds: Add support for "link" trigger Currently, we create a LED trigger for any link speed known to a PHY. These triggers only fire when their exact link speed had been negotiated (they aren't cumulative, that is, they don't fire for "their or any higher" link speed). What we are missing, however, is a trigger which will fire on any link speed known to the PHY. Such trigger can then be used for implementing a poor man's substitute of the "link" LED on boards that lack it. Let's add it. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 07:49:18 +08:00
<Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
for any speed known to the PHY.
net: phy: Allow splitting MDIO bus/device support from PHYs Introduce a new configuration symbol: MDIO_DEVICE which allows building the MDIO devices and bus code, without pulling in the entire Ethernet PHY library and devices code. PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are updated to reflect that. When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we have mdio-bus.ko as a loadable module, and it does not have a module_exit() function because the safety of removing a bus class is unclear. When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble everything into a common loadable module: libphy.ko because of nasty circular dependencies between phy.c, phy_device.c and mdio_bus.c which are really tough to untangle. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 01:01:19 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
comment "MII PHY device drivers"
sfp: add SFP module support Add support for SFP hotpluggable modules via sfp-bus and phylink. This supports both copper and optical SFP modules, which require different Serdes modes in order to properly negotiate the link. Optical SFP modules typically require the Serdes link to be talking 1000BaseX mode - this is the gigabit ethernet mode defined by the 802.3 standard. Copper SFP modules typically integrate a PHY in the module to convert from Serdes to copper, and the PHY will be configured by the vendor to either present a 1000BaseX Serdes link (for fixed 1000BaseT) or a SGMII Serdes link. However, this is vendor defined, so we instead detect the PHY, switch the link to SGMII mode, and use traditional PHY based negotiation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:39 +08:00
config SFP
tristate "SFP cage support"
depends on I2C && PHYLINK
net: phy: sfp: Do not use "imply HWMON" "imply HWMON" was supposed to ensure that the SFP phy code can be built with HWMON enabled or disabled while at the same time ensuring that HWMON is not built as module if SFP is built into the kernel. Unfortunately, that does not work as intended. With "allmodconfig", it results in several unrelated HWMON drivers to be disabled instead of being built as module as expected. Let's use the old "depends on HWMON || HWMON=n" instead. This is slightly different (it enforces SFP to be built as module if HWMON is built as module), but it is better than the alternative of using "IS_REACHABLE()" in the driver since that would disable sensor support if HWMON is built as module and SFP is built into the kernel. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 00:41:39 +08:00
depends on HWMON || HWMON=n
sfp: add SFP module support Add support for SFP hotpluggable modules via sfp-bus and phylink. This supports both copper and optical SFP modules, which require different Serdes modes in order to properly negotiate the link. Optical SFP modules typically require the Serdes link to be talking 1000BaseX mode - this is the gigabit ethernet mode defined by the 802.3 standard. Copper SFP modules typically integrate a PHY in the module to convert from Serdes to copper, and the PHY will be configured by the vendor to either present a 1000BaseX Serdes link (for fixed 1000BaseT) or a SGMII Serdes link. However, this is vendor defined, so we instead detect the PHY, switch the link to SGMII mode, and use traditional PHY based negotiation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:39 +08:00
select MDIO_I2C
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config AMD_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "AMD PHYs"
net: phy: Broadcom Cygnus internal Etherent PHY driver Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:49 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports the am79c874
net: phy: Broadcom Cygnus internal Etherent PHY driver Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:49 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config AQUANTIA_PHY
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
tristate "Aquantia PHYs"
---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
net-next: phy: new Asix Electronics PHY driver The Asix Electronics PHY found on the X-Surf 100 Amiga Zorro network card by Individual Computers is buggy, and needs the reset bit toggled as workaround to make a PHY soft reset succeed. Add workaround driver just for this special case. Suggested in xsurf100 patch series review by Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19 10:05:18 +08:00
config ASIX_PHY
tristate "Asix PHYs"
help
Currently supports the Asix Electronics PHY found in the X-Surf 100
AX88796B package.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config AT803X_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "AT803X PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently supports the AT8030 and AT8035 model
net: phy: Broadcom Cygnus internal Etherent PHY driver Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:49 +08:00
MIPS: BCM63XX: Add integrated ethernet PHY support for phylib. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 6 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/bcm63xx.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/bcm63xx.c Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-01 09:29:36 +08:00
config BCM63XX_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom 63xx SOCs internal PHY"
phylib: Allow BCM63XX PHY to be selected only on BCM63XX. This PHY is available integrated into BCM63xx series SOCs only. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Acked-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 06:07:58 +08:00
depends on BCM63XX
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
select BCM_NET_PHYLIB
MIPS: BCM63XX: Add integrated ethernet PHY support for phylib. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 6 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/bcm63xx.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/bcm63xx.c Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-01 09:29:36 +08:00
---help---
Currently supports the 6348 and 6358 PHYs.
net: phy: add Broadcom BCM7xxx internal PHY driver This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 08:08:45 +08:00
config BCM7XXX_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom 7xxx SOCs internal PHYs"
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
select BCM_NET_PHYLIB
net: phy: add Broadcom BCM7xxx internal PHY driver This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 08:08:45 +08:00
---help---
Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs Add a driver for BCM8706 and BCM8727 devices. These are a 10Gig PHYs which use MII_ADDR_C45 addressing. They are always 10G full duplex, so there is no autonegotiation. All we do is report link state and send interrupts when it changes. If the PHY has a device tree of_node associated with it, the "broadcom,c45-reg-init" property is used to supply register initialization values when config_init() is called. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27 15:33:38 +08:00
config BCM87XX_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom BCM8706 and BCM8727 PHYs"
netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs Add a driver for BCM8706 and BCM8727 devices. These are a 10Gig PHYs which use MII_ADDR_C45 addressing. They are always 10G full duplex, so there is no autonegotiation. All we do is report link state and send interrupts when it changes. If the PHY has a device tree of_node associated with it, the "broadcom,c45-reg-init" property is used to supply register initialization values when config_init() is called. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27 15:33:38 +08:00
help
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config BCM_CYGNUS_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom Cygnus SoC internal PHY"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
depends on ARCH_BCM_CYGNUS || COMPILE_TEST
depends on MDIO_BCM_IPROC
select BCM_NET_PHYLIB
phylib: add the ICPlus IP175C PHY driver The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12 07:24:51 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
This PHY driver is for the 1G internal PHYs of the Broadcom
Cygnus Family SoC.
phylib: add the ICPlus IP175C PHY driver The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12 07:24:51 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports internal PHY's used in the BCM11300,
BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
BCM58303 & BCM58305 Broadcom Cygnus SoCs.
phylib: Add Realtek 821x eth PHY support this PHY present on the MPC8315E and MPC837xE RDB boards. Signed-off-by: Johnson Leung <r58129@freescale.com> Signed-off-by: Kevin Lam <r43770@freescale.com> Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 19:50:54 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config BCM_NET_PHYLIB
tristate
phy: add natsemi PHY driver This patch adds the PHY device driver for the National Semiconductor DP83865 Gig PHYTER. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 08:14:12 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config BROADCOM_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Broadcom PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
select BCM_NET_PHYLIB
phy: add the ST ste10Xp PHYs This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 08:42:41 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
net: phy: broadcom: Add BCM54810 PHY entry The BCM54810 PHY requires some semi-unique configuration, which results in some additional configuration in addition to the standard config. Also, some users of the BCM54810 require the PHY lanes to be swapped. Since there is no way to detect this, add a device tree query to see if it is applicable. Inspired-by: Vikas Soni <vsoni@broadcom.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 13:10:58 +08:00
BCM5481, BCM54810 and BCM5482 PHYs.
phy: add the ST ste10Xp PHYs This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 08:42:41 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config CICADA_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Cicada PHYs"
phy: Add LSI ET1011C PHY driver Adds LSI ET1011C PHY driver. This driver is used by TI DM646x EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 14:21:25 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports the cis8204
phy: Add LSI ET1011C PHY driver Adds LSI ET1011C PHY driver. This driver is used by TI DM646x EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 14:21:25 +08:00
net: phy: Add Cortina CS4340 driver Add basic support for Cortina PHY drivers. Support only CS4340 for now. The phys are not compatible with IEEE 802.3 clause 22/45 registers. Implement proper read_status support. The generic 10G phy driver causes bus register access errors. The driver should be described using the "ethernet-phy-id" device tree compatible. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-29 17:11:30 +08:00
config CORTINA_PHY
tristate "Cortina EDC CDR 10G Ethernet PHY"
---help---
Currently supports the CS4340 phy.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config DAVICOM_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Davicom PHYs"
drivers/net/phy: micrel phy driver This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 14:12:41 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports dm9161e and dm9131
drivers/net/phy: micrel phy driver This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 14:12:41 +08:00
net: phy: DP83822 initial driver submission Add support for the TI DP83822 10/100Mbit ethernet phy. The DP83822 provides flexibility to connect to a MAC through a standard MII, RMII or RGMII interface. In addition the DP83822 needs to be removed from the DP83848 driver as the WoL support is added here for this device. Datasheet: http://www.ti.com/product/DP83822I/datasheet Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11 01:42:55 +08:00
config DP83822_PHY
tristate "Texas Instruments DP83822 PHY"
---help---
Supports the DP83822 PHY.
net: phy: DP83TC811: Introduce support for the DP83TC811 phy Add support for the DP83811 phy. The DP83811 supports both rgmii and sgmii interfaces. There are 2 part numbers for this the DP83TC811R does not reliably support the SGMII interface but the DP83TC811S will. There is not a way to differentiate these parts from the hardware or register set. So this is controlled via the DT to indicate which phy mode is required. Or the part can be strapped to a certain interface. Data sheet can be found here: http://www.ti.com/product/DP83TC811S-Q1/description http://www.ti.com/product/DP83TC811R-Q1/description Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-12 02:08:19 +08:00
config DP83TC811_PHY
tristate "Texas Instruments DP83TC822 PHY"
---help---
Supports the DP83TC822 PHY.
net: phy: dp83848: Add TI DP83848 Ethernet PHY Add support for the TI DP83848 Ethernet PHY device. The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting the MII and RMII interfaces. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21 05:28:57 +08:00
config DP83848_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Texas Instruments DP83848 PHY"
net: phy: dp83848: Add TI DP83848 Ethernet PHY Add support for the TI DP83848 Ethernet PHY device. The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting the MII and RMII interfaces. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21 05:28:57 +08:00
---help---
Supports the DP83848 PHY.
net: phy: dp83867: Add TI dp83867 phy Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 22:34:37 +08:00
config DP83867_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Texas Instruments DP83867 Gigabit PHY"
net: phy: dp83867: Add TI dp83867 phy Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 22:34:37 +08:00
---help---
Currently supports the DP83867 PHY.
[PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 14:00:29 +08:00
config FIXED_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
net: Allow FIXED_PHY to be modular. Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-17 03:30:09 +08:00
depends on PHYLIB
phy: move fixed_phy MII register generation to a library Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23 21:50:05 +08:00
select SWPHY
[PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 14:00:29 +08:00
---help---
phy/fixed.c: rework to not duplicate PHY layer functionality With that patch fixed.c now fully emulates MDIO bus, thus no need to duplicate PHY layer functionality. That, in turn, drastically simplifies the code, and drops down line count. As an additional bonus, now there is no need to register MDIO bus for each PHY, all emulated PHYs placed on the platform fixed MDIO bus. There is also no more need to pre-allocate PHYs via .config option, this is all now handled dynamically. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 06:51:22 +08:00
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
Currently tested with mpc866ads and mpc8349e-mitx.
PHY fixed driver: rework release path and update phy_id notation device_bind_driver() error code returning has been fixed. release() function has been written, so that to free resources in correct way; the release path is now clean. Before the rework, it used to cause Device 'fixed@100:1' does not have a release() function, it is broken and must be fixed. BUG: at drivers/base/core.c:104 device_release() Call Trace: [<ffffffff802ec380>] kobject_cleanup+0x53/0x7e [<ffffffff802ec3ab>] kobject_release+0x0/0x9 [<ffffffff802ecf3f>] kref_put+0x74/0x81 [<ffffffff8035493b>] fixed_mdio_register_device+0x230/0x265 [<ffffffff80564d31>] fixed_init+0x1f/0x35 [<ffffffff802071a4>] init+0x147/0x2fb [<ffffffff80223b6e>] schedule_tail+0x36/0x92 [<ffffffff8020a678>] child_rip+0xa/0x12 [<ffffffff80311714>] acpi_ds_init_one_object+0x0/0x83 [<ffffffff8020705d>] init+0x0/0x2fb [<ffffffff8020a66e>] child_rip+0x0/0x12 Also changed the notation of the fixed phy definition on mdio bus to the form of <speed>+<duplex> to make it able to be used by gianfar and ucc_geth that define phy_id strictly as "%d:%d" and cleaned up the whitespace issues. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-11 05:05:16 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config ICPLUS_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "ICPlus PHYs"
net: OpenFirmware GPIO based MDIO bitbang driver This patch adds an MDIO bitbang driver that uses the GPIO library and its OF bindings to access the bus I/Os. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-26 17:53:21 +08:00
---help---
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Currently supports the IP175C and IP1001 PHYs.
net: phy: Broadcom iProc MDIO bus driver This patch adds support for the Broadcom iProc MDIO bus interface. The MDIO interface can be found in the Broadcom iProc family Soc's. The MDIO bus is accessed using a combination of command and data registers. This MDIO driver provides access to the Etherent GPHY's connected to the MDIO bus. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:47 +08:00
NET: PHY: adds driver for Intel XWAY PHY This adds support for the Intel (former Lantiq) XWAY 11G and 22E PHYs. These PHYs are also named PEF 7061, PEF 7071, PEF 7072. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-06 05:41:11 +08:00
config INTEL_XWAY_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Intel XWAY PHYs"
NET: PHY: adds driver for Intel XWAY PHY This adds support for the Intel (former Lantiq) XWAY 11G and 22E PHYs. These PHYs are also named PEF 7061, PEF 7071, PEF 7072. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-06 05:41:11 +08:00
---help---
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
These PHYs are marked as standalone chips under the names
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config LSI_ET1011C_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "LSI ET1011C PHY"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Supports the LSI ET1011C PHY.
net: Add MDIO bus driver for the Hisilicon FEMAC This patch adds a separate driver for the MDIO interface of the Hisilicon Fast Ethernet MAC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15 16:26:33 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config LXT_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Intel LXT PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently supports the lxt970, lxt971
config MARVELL_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Marvell PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently has a driver for the 88E1011S
net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only supports Clause 45 accesses. The PHY appears (based on the vendor IDs) to be two different vendors IP, with each devad containing several instances. This PHY driver has only been tested with the RJ45 copper port, fiber port and a Marvell Armada 8040-based ethernet interface. It should be noted that to use the full range of speeds, MAC drivers need to also reconfigure the link mode as per phydev->interface, since the PHY automatically changes its interface mode depending on the negotiated speed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05 19:23:16 +08:00
config MARVELL_10G_PHY
tristate "Marvell Alaska 10Gbit PHYs"
---help---
Support for the Marvell Alaska MV88X3310 and compatible PHYs.
net: phy: Add Meson GXL Internal PHY driver Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs. This PHY seems to only implement some standard registers and need some workarounds to provide autoneg values from vendor registers. Some magic values are currently used to configure the PHY, and this a temporary setup until clarification about these registers names and registers fields are provided by Amlogic. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 23:51:23 +08:00
config MESON_GXL_PHY
tristate "Amlogic Meson GXL Internal PHY"
net: phy: Add Meson GXL PHY hardware dependency As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 22:17:27 +08:00
depends on ARCH_MESON || COMPILE_TEST
net: phy: Add Meson GXL Internal PHY driver Add driver for the Internal RMII PHY found in the Amlogic Meson GXL SoCs. This PHY seems to only implement some standard registers and need some workarounds to provide autoneg values from vendor registers. Some magic values are currently used to configure the PHY, and this a temporary setup until clarification about these registers names and registers fields are provided by Amlogic. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 23:51:23 +08:00
---help---
Currently has a driver for the Amlogic Meson GXL Internal PHY
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config MICREL_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Micrel PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
config MICROCHIP_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Microchip PHYs"
drivers: net: phy: xgene: Add MDIO driver Currently, SGMII based 1G rely on the hardware registers for link state and sometimes it's not reliable. To get most accurate link state, this interface has to use the MDIO bus to poll the PHY. In X-Gene SoC, MDIO bus is shared across RGMII and SGMII based 1G interfaces, so adding this driver to manage MDIO bus. This driver registers the mdio bus and registers the PHYs connected to it. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 08:12:40 +08:00
help
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
Supports the LAN88XX PHYs.
drivers: net: phy: xgene: Add MDIO driver Currently, SGMII based 1G rely on the hardware registers for link state and sometimes it's not reliable. To get most accurate link state, this interface has to use the MDIO bus to poll the PHY. In X-Gene SoC, MDIO bus is shared across RGMII and SGMII based 1G interfaces, so adding this driver to manage MDIO bus. This driver registers the mdio bus and registers the PHYs connected to it. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Tested-by: Toan Le <toanle@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 08:12:40 +08:00
microchip_t1: Add driver for Microchip LAN87XX T1 PHYs Add driver for Microchip LAN87XX T1 PHYs This patch support driver for Microchp T1 PHYs. There will be followup patches to this driver to support T1 PHY features such as cable diagnostics, signal quality indicator(SQI), sleep and wakeup (TC10) support. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 23:39:17 +08:00
config MICROCHIP_T1_PHY
tristate "Microchip T1 PHYs"
---help---
Supports the LAN87XX PHYs.
Microsemi VSC 8531/41 PHY Driver Hello, I added all review comments and re-sending for review. >From a5017f5878a92d2acec86a6a29b1498c457cb73a Mon Sep 17 00:00:00 2001 From: Nagaraju Lakkaraju <Raju.Lakkaraju@microsemi.com> Date: Wed, 3 Aug 2016 18:28:24 +0530 Subject: [PATCH v2] net: phy: Add drivers for Microsemi PHYs Signed-off-by: Nagaraju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-05 20:24:21 +08:00
config MICROSEMI_PHY
net: phy: Fixed checkpatch errors for Microsemi PHYs. The existing VSC85xx PHY driver did not follow the coding style and caused "checkpatch" to complain. This commit fixes this. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08 16:39:31 +08:00
tristate "Microsemi PHYs"
---help---
net: phy: Add support for Microsemi VSC 8530/40 Fast Ethernet PHY Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28 18:10:11 +08:00
Currently supports VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
Microsemi VSC 8531/41 PHY Driver Hello, I added all review comments and re-sending for review. >From a5017f5878a92d2acec86a6a29b1498c457cb73a Mon Sep 17 00:00:00 2001 From: Nagaraju Lakkaraju <Raju.Lakkaraju@microsemi.com> Date: Wed, 3 Aug 2016 18:28:24 +0530 Subject: [PATCH v2] net: phy: Add drivers for Microsemi PHYs Signed-off-by: Nagaraju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-05 20:24:21 +08:00
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config NATIONAL_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "National Semiconductor PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently supports the DP83865 PHY.
config QSEMI_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Quality Semiconductor PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently supports the qs6612
config REALTEK_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "Realtek PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Supports the Realtek 821x PHY.
Add a driver for Renesas uPD60620 and uPD60620A PHYs Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 21:40:08 +08:00
config RENESAS_PHY
tristate "Driver for Renesas PHYs"
---help---
Supports the Renesas PHYs uPD60620 and uPD60620A.
net: phy: Add rockchip PHY driver support Support integrated ethernet PHY currently. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 21:56:40 +08:00
config ROCKCHIP_PHY
tristate "Driver for Rockchip Ethernet PHYs"
---help---
Currently supports the integrated Ethernet PHY.
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config SMSC_PHY
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "SMSC PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
config STE10XP
net: phy: Kconfig: Remove redundant "Support for" Remove the redundant "Support for" and "Drivers for" from the Kconfig short description. This makes the manufacture much more prominent in the list and makes the shortcut keys useful. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:06 +08:00
tristate "STMicroelectronics STe10Xp PHYs"
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
---help---
This is the driver for the STe100p and STe101p PHYs.
config TERANETICS_PHY
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
tristate "Teranetics PHYs"
---help---
Currently supports the Teranetics TN2020
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
config VITESSE_PHY
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
tristate "Vitesse PHYs"
---help---
Currently supports the vsc8244
net: phy: Sort Makefile and Kconfig Sort the files to reduce merge conflicts and to make it easier to find drivers by name. Also separate the MDIO bus drivers from the PHY drivers, again to help find what you need. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 05:56:05 +08:00
net: phy: Add gmiitorgmii converter support This patch adds support for gmiitorgmii converter. The GMII to RGMII IP core provides the Reduced Gigabit Media Independent Interface (RGMII) between Ethernet physical media Devices and the Gigabit Ethernet controller. This core can Switch dynamically between the three different speed modes of Operation by configuring the converter register through mdio write. MDIO interface is used to set operating speed of Ethernet MAC. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 13:50:08 +08:00
config XILINX_GMII2RGMII
net: phy: Use tab for indentation in Kconfig Using tabs instead of space for indentation. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 21:43:00 +08:00
tristate "Xilinx GMII2RGMII converter driver"
---help---
This driver support xilinx GMII to RGMII IP core it provides
the Reduced Gigabit Media Independent Interface(RGMII) between
Ethernet physical media devices and the Gigabit Ethernet controller.
net: phy: Add gmiitorgmii converter support This patch adds support for gmiitorgmii converter. The GMII to RGMII IP core provides the Reduced Gigabit Media Independent Interface (RGMII) between Ethernet physical media Devices and the Gigabit Ethernet controller. This core can Switch dynamically between the three different speed modes of Operation by configuring the converter register through mdio write. MDIO interface is used to set operating speed of Ethernet MAC. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 13:50:08 +08:00
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
endif # PHYLIB
phy: Micrel KS8995MA 5-ports 10/100 managed Ethernet switch support added Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Frederic Lambert <frdrc66@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-18 15:33:41 +08:00
config MICREL_KS8995MA
tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
depends on SPI