linux_old1/drivers/spi/spi-rockchip.c

947 lines
22 KiB
C
Raw Normal View History

spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
/*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
* Author: Addy Ke <addy.ke@rock-chips.com>
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
#define DRIVER_NAME "rockchip-spi"
/* SPI register offsets */
#define ROCKCHIP_SPI_CTRLR0 0x0000
#define ROCKCHIP_SPI_CTRLR1 0x0004
#define ROCKCHIP_SPI_SSIENR 0x0008
#define ROCKCHIP_SPI_SER 0x000c
#define ROCKCHIP_SPI_BAUDR 0x0010
#define ROCKCHIP_SPI_TXFTLR 0x0014
#define ROCKCHIP_SPI_RXFTLR 0x0018
#define ROCKCHIP_SPI_TXFLR 0x001c
#define ROCKCHIP_SPI_RXFLR 0x0020
#define ROCKCHIP_SPI_SR 0x0024
#define ROCKCHIP_SPI_IPR 0x0028
#define ROCKCHIP_SPI_IMR 0x002c
#define ROCKCHIP_SPI_ISR 0x0030
#define ROCKCHIP_SPI_RISR 0x0034
#define ROCKCHIP_SPI_ICR 0x0038
#define ROCKCHIP_SPI_DMACR 0x003c
#define ROCKCHIP_SPI_DMATDLR 0x0040
#define ROCKCHIP_SPI_DMARDLR 0x0044
#define ROCKCHIP_SPI_TXDR 0x0400
#define ROCKCHIP_SPI_RXDR 0x0800
/* Bit fields in CTRLR0 */
#define CR0_DFS_OFFSET 0
#define CR0_CFS_OFFSET 2
#define CR0_SCPH_OFFSET 6
#define CR0_SCPOL_OFFSET 7
#define CR0_CSM_OFFSET 8
#define CR0_CSM_KEEP 0x0
/* ss_n be high for half sclk_out cycles */
#define CR0_CSM_HALF 0X1
/* ss_n be high for one sclk_out cycle */
#define CR0_CSM_ONE 0x2
/* ss_n to sclk_out delay */
#define CR0_SSD_OFFSET 10
/*
* The period between ss_n active and
* sclk_out active is half sclk_out cycles
*/
#define CR0_SSD_HALF 0x0
/*
* The period between ss_n active and
* sclk_out active is one sclk_out cycle
*/
#define CR0_SSD_ONE 0x1
#define CR0_EM_OFFSET 11
#define CR0_EM_LITTLE 0x0
#define CR0_EM_BIG 0x1
#define CR0_FBM_OFFSET 12
#define CR0_FBM_MSB 0x0
#define CR0_FBM_LSB 0x1
#define CR0_BHT_OFFSET 13
#define CR0_BHT_16BIT 0x0
#define CR0_BHT_8BIT 0x1
#define CR0_RSD_OFFSET 14
#define CR0_FRF_OFFSET 16
#define CR0_FRF_SPI 0x0
#define CR0_FRF_SSP 0x1
#define CR0_FRF_MICROWIRE 0x2
#define CR0_XFM_OFFSET 18
#define CR0_XFM_MASK (0x03 << SPI_XFM_OFFSET)
#define CR0_XFM_TR 0x0
#define CR0_XFM_TO 0x1
#define CR0_XFM_RO 0x2
#define CR0_OPM_OFFSET 20
#define CR0_OPM_MASTER 0x0
#define CR0_OPM_SLAVE 0x1
#define CR0_MTM_OFFSET 0x21
/* Bit fields in SER, 2bit */
#define SER_MASK 0x3
/* Bit fields in SR, 5bit */
#define SR_MASK 0x1f
#define SR_BUSY (1 << 0)
#define SR_TF_FULL (1 << 1)
#define SR_TF_EMPTY (1 << 2)
#define SR_RF_EMPTY (1 << 3)
#define SR_RF_FULL (1 << 4)
/* Bit fields in ISR, IMR, ISR, RISR, 5bit */
#define INT_MASK 0x1f
#define INT_TF_EMPTY (1 << 0)
#define INT_TF_OVERFLOW (1 << 1)
#define INT_RF_UNDERFLOW (1 << 2)
#define INT_RF_OVERFLOW (1 << 3)
#define INT_RF_FULL (1 << 4)
/* Bit fields in ICR, 4bit */
#define ICR_MASK 0x0f
#define ICR_ALL (1 << 0)
#define ICR_RF_UNDERFLOW (1 << 1)
#define ICR_RF_OVERFLOW (1 << 2)
#define ICR_TF_OVERFLOW (1 << 3)
/* Bit fields in DMACR */
#define RF_DMA_EN (1 << 0)
#define TF_DMA_EN (1 << 1)
#define RXBUSY (1 << 0)
#define TXBUSY (1 << 1)
/* sclk_out: spi master internal logic in rk3x can support 50Mhz */
#define MAX_SCLK_OUT 50000000
/*
* SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However,
* the controller seems to hang when given 0x10000, so stick with this for now.
*/
#define ROCKCHIP_SPI_MAX_TRANLEN 0xffff
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
enum rockchip_ssi_type {
SSI_MOTO_SPI = 0,
SSI_TI_SSP,
SSI_NS_MICROWIRE,
};
struct rockchip_spi_dma_data {
struct dma_chan *ch;
enum dma_transfer_direction direction;
dma_addr_t addr;
};
struct rockchip_spi {
struct device *dev;
struct spi_master *master;
struct clk *spiclk;
struct clk *apb_pclk;
void __iomem *regs;
/*depth of the FIFO buffer */
u32 fifo_len;
/* max bus freq supported */
u32 max_freq;
/* supported slave numbers */
enum rockchip_ssi_type type;
u16 mode;
u8 tmode;
u8 bpw;
u8 n_bytes;
u32 rsd_nsecs;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
unsigned len;
u32 speed;
const void *tx;
const void *tx_end;
void *rx;
void *rx_end;
u32 state;
/* protect state */
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spinlock_t lock;
u32 use_dma;
struct sg_table tx_sg;
struct sg_table rx_sg;
struct rockchip_spi_dma_data dma_rx;
struct rockchip_spi_dma_data dma_tx;
struct dma_slave_caps dma_caps;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
};
static inline void spi_enable_chip(struct rockchip_spi *rs, int enable)
{
writel_relaxed((enable ? 1 : 0), rs->regs + ROCKCHIP_SPI_SSIENR);
}
static inline void spi_set_clk(struct rockchip_spi *rs, u16 div)
{
writel_relaxed(div, rs->regs + ROCKCHIP_SPI_BAUDR);
}
static inline void flush_fifo(struct rockchip_spi *rs)
{
while (readl_relaxed(rs->regs + ROCKCHIP_SPI_RXFLR))
readl_relaxed(rs->regs + ROCKCHIP_SPI_RXDR);
}
static inline void wait_for_idle(struct rockchip_spi *rs)
{
unsigned long timeout = jiffies + msecs_to_jiffies(5);
do {
if (!(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY))
return;
} while (!time_after(jiffies, timeout));
dev_warn(rs->dev, "spi controller is in busy state!\n");
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
static u32 get_fifo_len(struct rockchip_spi *rs)
{
u32 fifo;
for (fifo = 2; fifo < 32; fifo++) {
writel_relaxed(fifo, rs->regs + ROCKCHIP_SPI_TXFTLR);
if (fifo != readl_relaxed(rs->regs + ROCKCHIP_SPI_TXFTLR))
break;
}
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_TXFTLR);
return (fifo == 31) ? 0 : fifo;
}
static inline u32 tx_max(struct rockchip_spi *rs)
{
u32 tx_left, tx_room;
tx_left = (rs->tx_end - rs->tx) / rs->n_bytes;
tx_room = rs->fifo_len - readl_relaxed(rs->regs + ROCKCHIP_SPI_TXFLR);
return min(tx_left, tx_room);
}
static inline u32 rx_max(struct rockchip_spi *rs)
{
u32 rx_left = (rs->rx_end - rs->rx) / rs->n_bytes;
u32 rx_room = (u32)readl_relaxed(rs->regs + ROCKCHIP_SPI_RXFLR);
return min(rx_left, rx_room);
}
static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)
{
u32 ser;
struct spi_master *master = spi->master;
struct rockchip_spi *rs = spi_master_get_devdata(master);
pm_runtime_get_sync(rs->dev);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
ser = readl_relaxed(rs->regs + ROCKCHIP_SPI_SER) & SER_MASK;
/*
* drivers/spi/spi.c:
* static void spi_set_cs(struct spi_device *spi, bool enable)
* {
* if (spi->mode & SPI_CS_HIGH)
* enable = !enable;
*
* if (spi->cs_gpio >= 0)
* gpio_set_value(spi->cs_gpio, !enable);
* else if (spi->master->set_cs)
* spi->master->set_cs(spi, !enable);
* }
*
* Note: enable(rockchip_spi_set_cs) = !enable(spi_set_cs)
*/
if (!enable)
ser |= 1 << spi->chip_select;
else
ser &= ~(1 << spi->chip_select);
writel_relaxed(ser, rs->regs + ROCKCHIP_SPI_SER);
pm_runtime_put_sync(rs->dev);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
static int rockchip_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{
struct rockchip_spi *rs = spi_master_get_devdata(master);
struct spi_device *spi = msg->spi;
rs->mode = spi->mode;
return 0;
}
static void rockchip_spi_handle_err(struct spi_master *master,
struct spi_message *msg)
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{
unsigned long flags;
struct rockchip_spi *rs = spi_master_get_devdata(master);
spin_lock_irqsave(&rs->lock, flags);
/*
* For DMA mode, we need terminate DMA channel and flush
* fifo for the next transfer if DMA thansfer timeout.
* handle_err() was called by core if transfer failed.
* Maybe it is reasonable for error handling here.
*/
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (rs->use_dma) {
if (rs->state & RXBUSY) {
dmaengine_terminate_async(rs->dma_rx.ch);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
flush_fifo(rs);
}
if (rs->state & TXBUSY)
dmaengine_terminate_async(rs->dma_tx.ch);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
spin_unlock_irqrestore(&rs->lock, flags);
}
static int rockchip_spi_unprepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct rockchip_spi *rs = spi_master_get_devdata(master);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spi_enable_chip(rs, 0);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return 0;
}
static void rockchip_spi_pio_writer(struct rockchip_spi *rs)
{
u32 max = tx_max(rs);
u32 txw = 0;
while (max--) {
if (rs->n_bytes == 1)
txw = *(u8 *)(rs->tx);
else
txw = *(u16 *)(rs->tx);
writel_relaxed(txw, rs->regs + ROCKCHIP_SPI_TXDR);
rs->tx += rs->n_bytes;
}
}
static void rockchip_spi_pio_reader(struct rockchip_spi *rs)
{
u32 max = rx_max(rs);
u32 rxw;
while (max--) {
rxw = readl_relaxed(rs->regs + ROCKCHIP_SPI_RXDR);
if (rs->n_bytes == 1)
*(u8 *)(rs->rx) = (u8)rxw;
else
*(u16 *)(rs->rx) = (u16)rxw;
rs->rx += rs->n_bytes;
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
static int rockchip_spi_pio_transfer(struct rockchip_spi *rs)
{
int remain = 0;
do {
if (rs->tx) {
remain = rs->tx_end - rs->tx;
rockchip_spi_pio_writer(rs);
}
if (rs->rx) {
remain = rs->rx_end - rs->rx;
rockchip_spi_pio_reader(rs);
}
cpu_relax();
} while (remain);
/* If tx, wait until the FIFO data completely. */
if (rs->tx)
wait_for_idle(rs);
spi_enable_chip(rs, 0);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return 0;
}
static void rockchip_spi_dma_rxcb(void *data)
{
unsigned long flags;
struct rockchip_spi *rs = data;
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
if (!(rs->state & TXBUSY)) {
spi_enable_chip(rs, 0);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spi_finalize_current_transfer(rs->master);
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spin_unlock_irqrestore(&rs->lock, flags);
}
static void rockchip_spi_dma_txcb(void *data)
{
unsigned long flags;
struct rockchip_spi *rs = data;
/* Wait until the FIFO data completely. */
wait_for_idle(rs);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~TXBUSY;
if (!(rs->state & RXBUSY)) {
spi_enable_chip(rs, 0);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spi_finalize_current_transfer(rs->master);
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spin_unlock_irqrestore(&rs->lock, flags);
}
static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{
unsigned long flags;
struct dma_slave_config rxconf, txconf;
struct dma_async_tx_descriptor *rxdesc, *txdesc;
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
rs->state &= ~TXBUSY;
spin_unlock_irqrestore(&rs->lock, flags);
rxdesc = NULL;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (rs->rx) {
rxconf.direction = rs->dma_rx.direction;
rxconf.src_addr = rs->dma_rx.addr;
rxconf.src_addr_width = rs->n_bytes;
if (rs->dma_caps.max_burst > 4)
rxconf.src_maxburst = 4;
else
rxconf.src_maxburst = 1;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
dmaengine_slave_config(rs->dma_rx.ch, &rxconf);
rxdesc = dmaengine_prep_slave_sg(
rs->dma_rx.ch,
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->rx_sg.sgl, rs->rx_sg.nents,
rs->dma_rx.direction, DMA_PREP_INTERRUPT);
if (!rxdesc)
return -EINVAL;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rxdesc->callback = rockchip_spi_dma_rxcb;
rxdesc->callback_param = rs;
}
txdesc = NULL;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (rs->tx) {
txconf.direction = rs->dma_tx.direction;
txconf.dst_addr = rs->dma_tx.addr;
txconf.dst_addr_width = rs->n_bytes;
if (rs->dma_caps.max_burst > 4)
txconf.dst_maxburst = 4;
else
txconf.dst_maxburst = 1;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
dmaengine_slave_config(rs->dma_tx.ch, &txconf);
txdesc = dmaengine_prep_slave_sg(
rs->dma_tx.ch,
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->tx_sg.sgl, rs->tx_sg.nents,
rs->dma_tx.direction, DMA_PREP_INTERRUPT);
if (!txdesc) {
if (rxdesc)
dmaengine_terminate_sync(rs->dma_rx.ch);
return -EINVAL;
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
txdesc->callback = rockchip_spi_dma_txcb;
txdesc->callback_param = rs;
}
/* rx must be started before tx due to spi instinct */
if (rxdesc) {
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spin_lock_irqsave(&rs->lock, flags);
rs->state |= RXBUSY;
spin_unlock_irqrestore(&rs->lock, flags);
dmaengine_submit(rxdesc);
dma_async_issue_pending(rs->dma_rx.ch);
}
if (txdesc) {
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spin_lock_irqsave(&rs->lock, flags);
rs->state |= TXBUSY;
spin_unlock_irqrestore(&rs->lock, flags);
dmaengine_submit(txdesc);
dma_async_issue_pending(rs->dma_tx.ch);
}
return 0;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
static void rockchip_spi_config(struct rockchip_spi *rs)
{
u32 div = 0;
u32 dmacr = 0;
int rsd = 0;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
u32 cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET)
| (CR0_SSD_ONE << CR0_SSD_OFFSET)
| (CR0_EM_BIG << CR0_EM_OFFSET);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
cr0 |= (rs->n_bytes << CR0_DFS_OFFSET);
cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET);
cr0 |= (rs->tmode << CR0_XFM_OFFSET);
cr0 |= (rs->type << CR0_FRF_OFFSET);
if (rs->use_dma) {
if (rs->tx)
dmacr |= TF_DMA_EN;
if (rs->rx)
dmacr |= RF_DMA_EN;
}
if (WARN_ON(rs->speed > MAX_SCLK_OUT))
rs->speed = MAX_SCLK_OUT;
/* the minimum divisor is 2 */
if (rs->max_freq < 2 * rs->speed) {
clk_set_rate(rs->spiclk, 2 * rs->speed);
rs->max_freq = clk_get_rate(rs->spiclk);
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
/* div doesn't support odd number */
div = DIV_ROUND_UP(rs->max_freq, rs->speed);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
div = (div + 1) & 0xfffe;
/* Rx sample delay is expressed in parent clock cycles (max 3) */
rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->max_freq >> 8),
1000000000 >> 8);
if (!rsd && rs->rsd_nsecs) {
pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n",
rs->max_freq, rs->rsd_nsecs);
} else if (rsd > 3) {
rsd = 3;
pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n",
rs->max_freq, rs->rsd_nsecs,
rsd * 1000000000U / rs->max_freq);
}
cr0 |= rsd << CR0_RSD_OFFSET;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1);
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_TXFTLR);
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMATDLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
spi_set_clk(rs, div);
dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
{
return ROCKCHIP_SPI_MAX_TRANLEN;
}
static int rockchip_spi_transfer_one(
struct spi_master *master,
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
struct spi_device *spi,
struct spi_transfer *xfer)
{
int ret = 0;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
struct rockchip_spi *rs = spi_master_get_devdata(master);
WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY));
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (!xfer->tx_buf && !xfer->rx_buf) {
dev_err(rs->dev, "No buffer for transfer\n");
return -EINVAL;
}
if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) {
dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len);
return -EINVAL;
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->speed = xfer->speed_hz;
rs->bpw = xfer->bits_per_word;
rs->n_bytes = rs->bpw >> 3;
rs->tx = xfer->tx_buf;
rs->tx_end = rs->tx + xfer->len;
rs->rx = xfer->rx_buf;
rs->rx_end = rs->rx + xfer->len;
rs->len = xfer->len;
rs->tx_sg = xfer->tx_sg;
rs->rx_sg = xfer->rx_sg;
if (rs->tx && rs->rx)
rs->tmode = CR0_XFM_TR;
else if (rs->tx)
rs->tmode = CR0_XFM_TO;
else if (rs->rx)
rs->tmode = CR0_XFM_RO;
/* we need prepare dma before spi was enabled */
if (master->can_dma && master->can_dma(master, spi, xfer))
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->use_dma = 1;
else
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->use_dma = 0;
rockchip_spi_config(rs);
if (rs->use_dma) {
if (rs->tmode == CR0_XFM_RO) {
/* rx: dma must be prepared first */
ret = rockchip_spi_prepare_dma(rs);
spi_enable_chip(rs, 1);
} else {
/* tx or tr: spi must be enabled first */
spi_enable_chip(rs, 1);
ret = rockchip_spi_prepare_dma(rs);
}
/* successful DMA prepare means the transfer is in progress */
ret = ret ? ret : 1;
} else {
spi_enable_chip(rs, 1);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
ret = rockchip_spi_pio_transfer(rs);
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return ret;
}
static bool rockchip_spi_can_dma(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{
struct rockchip_spi *rs = spi_master_get_devdata(master);
return (xfer->len > rs->fifo_len);
}
static int rockchip_spi_probe(struct platform_device *pdev)
{
int ret = 0;
struct rockchip_spi *rs;
struct spi_master *master;
struct resource *mem;
u32 rsd_nsecs;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
master = spi_alloc_master(&pdev->dev, sizeof(struct rockchip_spi));
if (!master)
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return -ENOMEM;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
platform_set_drvdata(pdev, master);
rs = spi_master_get_devdata(master);
/* Get basic io resource and map it */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rs->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(rs->regs)) {
ret = PTR_ERR(rs->regs);
goto err_put_master;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
rs->apb_pclk = devm_clk_get(&pdev->dev, "apb_pclk");
if (IS_ERR(rs->apb_pclk)) {
dev_err(&pdev->dev, "Failed to get apb_pclk\n");
ret = PTR_ERR(rs->apb_pclk);
goto err_put_master;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
rs->spiclk = devm_clk_get(&pdev->dev, "spiclk");
if (IS_ERR(rs->spiclk)) {
dev_err(&pdev->dev, "Failed to get spi_pclk\n");
ret = PTR_ERR(rs->spiclk);
goto err_put_master;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
ret = clk_prepare_enable(rs->apb_pclk);
if (ret) {
dev_err(&pdev->dev, "Failed to enable apb_pclk\n");
goto err_put_master;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
ret = clk_prepare_enable(rs->spiclk);
if (ret) {
dev_err(&pdev->dev, "Failed to enable spi_clk\n");
goto err_disable_apbclk;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
spi_enable_chip(rs, 0);
rs->type = SSI_MOTO_SPI;
rs->master = master;
rs->dev = &pdev->dev;
rs->max_freq = clk_get_rate(rs->spiclk);
if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns",
&rsd_nsecs))
rs->rsd_nsecs = rsd_nsecs;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->fifo_len = get_fifo_len(rs);
if (!rs->fifo_len) {
dev_err(&pdev->dev, "Failed to get fifo length\n");
ret = -EINVAL;
goto err_disable_spiclk;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
spin_lock_init(&rs->lock);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
master->auto_runtime_pm = true;
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
master->num_chipselect = 2;
master->dev.of_node = pdev->dev.of_node;
master->bits_per_word_mask = SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
master->set_cs = rockchip_spi_set_cs;
master->prepare_message = rockchip_spi_prepare_message;
master->unprepare_message = rockchip_spi_unprepare_message;
master->transfer_one = rockchip_spi_transfer_one;
master->max_transfer_size = rockchip_spi_max_transfer_size;
master->handle_err = rockchip_spi_handle_err;
master->flags = SPI_MASTER_GPIO_SS;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");
if (IS_ERR(rs->dma_tx.ch)) {
/* Check tx to see if we need defer probing driver */
if (PTR_ERR(rs->dma_tx.ch) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto err_disable_pm_runtime;
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
dev_warn(rs->dev, "Failed to request TX DMA channel\n");
rs->dma_tx.ch = NULL;
}
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->dma_rx.ch = dma_request_chan(rs->dev, "rx");
if (IS_ERR(rs->dma_rx.ch)) {
if (PTR_ERR(rs->dma_rx.ch) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto err_free_dma_tx;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
dev_warn(rs->dev, "Failed to request RX DMA channel\n");
rs->dma_rx.ch = NULL;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
if (rs->dma_tx.ch && rs->dma_rx.ch) {
dma_get_slave_caps(rs->dma_rx.ch, &(rs->dma_caps));
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
rs->dma_tx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_TXDR);
rs->dma_rx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_RXDR);
rs->dma_tx.direction = DMA_MEM_TO_DEV;
rs->dma_rx.direction = DMA_DEV_TO_MEM;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
master->can_dma = rockchip_spi_can_dma;
master->dma_tx = rs->dma_tx.ch;
master->dma_rx = rs->dma_rx.ch;
}
ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
dev_err(&pdev->dev, "Failed to register master\n");
goto err_free_dma_rx;
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
}
return 0;
err_free_dma_rx:
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (rs->dma_rx.ch)
dma_release_channel(rs->dma_rx.ch);
err_free_dma_tx:
if (rs->dma_tx.ch)
dma_release_channel(rs->dma_tx.ch);
err_disable_pm_runtime:
pm_runtime_disable(&pdev->dev);
err_disable_spiclk:
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
clk_disable_unprepare(rs->spiclk);
err_disable_apbclk:
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
clk_disable_unprepare(rs->apb_pclk);
err_put_master:
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
spi_master_put(master);
return ret;
}
static int rockchip_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct rockchip_spi *rs = spi_master_get_devdata(master);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(rs->spiclk);
clk_disable_unprepare(rs->apb_pclk);
if (rs->dma_tx.ch)
dma_release_channel(rs->dma_tx.ch);
if (rs->dma_rx.ch)
dma_release_channel(rs->dma_rx.ch);
spi_master_put(master);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int rockchip_spi_suspend(struct device *dev)
{
int ret = 0;
struct spi_master *master = dev_get_drvdata(dev);
struct rockchip_spi *rs = spi_master_get_devdata(master);
ret = spi_master_suspend(rs->master);
if (ret)
return ret;
if (!pm_runtime_suspended(dev)) {
clk_disable_unprepare(rs->spiclk);
clk_disable_unprepare(rs->apb_pclk);
}
pinctrl_pm_select_sleep_state(dev);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
return ret;
}
static int rockchip_spi_resume(struct device *dev)
{
int ret = 0;
struct spi_master *master = dev_get_drvdata(dev);
struct rockchip_spi *rs = spi_master_get_devdata(master);
pinctrl_pm_select_default_state(dev);
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
if (!pm_runtime_suspended(dev)) {
ret = clk_prepare_enable(rs->apb_pclk);
if (ret < 0)
return ret;
ret = clk_prepare_enable(rs->spiclk);
if (ret < 0) {
clk_disable_unprepare(rs->apb_pclk);
return ret;
}
}
ret = spi_master_resume(rs->master);
if (ret < 0) {
clk_disable_unprepare(rs->spiclk);
clk_disable_unprepare(rs->apb_pclk);
}
return ret;
}
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
static int rockchip_spi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct rockchip_spi *rs = spi_master_get_devdata(master);
clk_disable_unprepare(rs->spiclk);
clk_disable_unprepare(rs->apb_pclk);
return 0;
}
static int rockchip_spi_runtime_resume(struct device *dev)
{
int ret;
struct spi_master *master = dev_get_drvdata(dev);
struct rockchip_spi *rs = spi_master_get_devdata(master);
ret = clk_prepare_enable(rs->apb_pclk);
if (ret)
return ret;
ret = clk_prepare_enable(rs->spiclk);
if (ret)
clk_disable_unprepare(rs->apb_pclk);
return ret;
}
#endif /* CONFIG_PM */
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
static const struct dev_pm_ops rockchip_spi_pm = {
SET_SYSTEM_SLEEP_PM_OPS(rockchip_spi_suspend, rockchip_spi_resume)
SET_RUNTIME_PM_OPS(rockchip_spi_runtime_suspend,
rockchip_spi_runtime_resume, NULL)
};
static const struct of_device_id rockchip_spi_dt_match[] = {
{ .compatible = "rockchip,rk3036-spi", },
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{ .compatible = "rockchip,rk3066-spi", },
{ .compatible = "rockchip,rk3188-spi", },
{ .compatible = "rockchip,rk3228-spi", },
{ .compatible = "rockchip,rk3288-spi", },
{ .compatible = "rockchip,rk3368-spi", },
{ .compatible = "rockchip,rk3399-spi", },
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
{ },
};
MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
static struct platform_driver rockchip_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.pm = &rockchip_spi_pm,
.of_match_table = of_match_ptr(rockchip_spi_dt_match),
},
.probe = rockchip_spi_probe,
.remove = rockchip_spi_remove,
};
module_platform_driver(rockchip_spi_driver);
MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-01 09:03:59 +08:00
MODULE_DESCRIPTION("ROCKCHIP SPI Controller Driver");
MODULE_LICENSE("GPL v2");