linux/drivers/irqchip/irq-armada-370-xp.c

712 lines
20 KiB
C
Raw Normal View History

/*
* Marvell Armada 370 and Armada XP SoC IRQ handling
*
* Copyright (C) 2012 Marvell
*
* Lior Amsalem <alior@marvell.com>
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Ben Dooks <ben.dooks@codethink.co.uk>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/cpu.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/msi.h>
#include <asm/mach/arch.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
#include <asm/mach/irq.h>
/*
* Overall diagram of the Armada XP interrupt controller:
*
* To CPU 0 To CPU 1
*
* /\ /\
* || ||
* +---------------+ +---------------+
* | | | |
* | per-CPU | | per-CPU |
* | mask/unmask | | mask/unmask |
* | CPU0 | | CPU1 |
* | | | |
* +---------------+ +---------------+
* /\ /\
* || ||
* \\_______________________//
* ||
* +-------------------+
* | |
* | Global interrupt |
* | mask/unmask |
* | |
* +-------------------+
* /\
* ||
* interrupt from
* device
*
* The "global interrupt mask/unmask" is modified using the
* ARMADA_370_XP_INT_SET_ENABLE_OFFS and
* ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS registers, which are relative
* to "main_int_base".
*
* The "per-CPU mask/unmask" is modified using the
* ARMADA_370_XP_INT_SET_MASK_OFFS and
* ARMADA_370_XP_INT_CLEAR_MASK_OFFS registers, which are relative to
* "per_cpu_int_base". This base address points to a special address,
* which automatically accesses the registers of the current CPU.
*
* The per-CPU mask/unmask can also be adjusted using the global
* per-interrupt ARMADA_370_XP_INT_SOURCE_CTL register, which we use
* to configure interrupt affinity.
*
* Due to this model, all interrupts need to be mask/unmasked at two
* different levels: at the global level and at the per-CPU level.
*
* This driver takes the following approach to deal with this:
*
* - For global interrupts:
*
* At ->map() time, a global interrupt is unmasked at the per-CPU
* mask/unmask level. It is therefore unmasked at this level for
* the current CPU, running the ->map() code. This allows to have
* the interrupt unmasked at this level in non-SMP
* configurations. In SMP configurations, the ->set_affinity()
* callback is called, which using the
* ARMADA_370_XP_INT_SOURCE_CTL() readjusts the per-CPU mask/unmask
* for the interrupt.
*
* The ->mask() and ->unmask() operations only mask/unmask the
* interrupt at the "global" level.
*
* So, a global interrupt is enabled at the per-CPU level as soon
* as it is mapped. At run time, the masking/unmasking takes place
* at the global level.
*
* - For per-CPU interrupts
*
* At ->map() time, a per-CPU interrupt is unmasked at the global
* mask/unmask level.
*
* The ->mask() and ->unmask() operations mask/unmask the interrupt
* at the per-CPU level.
*
* So, a per-CPU interrupt is enabled at the global level as soon
* as it is mapped. At run time, the masking/unmasking takes place
* at the per-CPU level.
*/
/* Registers relative to main_int_base */
#define ARMADA_370_XP_INT_CONTROL (0x00)
#define ARMADA_370_XP_SW_TRIG_INT_OFFS (0x04)
#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30)
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid)
/* Registers relative to per_cpu_int_base */
#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x08)
#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0x0c)
#define ARMADA_375_PPI_CAUSE (0x10)
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48)
#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C)
#define ARMADA_370_XP_INT_FABRIC_MASK_OFFS (0x54)
#define ARMADA_370_XP_INT_CAUSE_PERF(cpu) (1 << cpu)
#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
#define IPI_DOORBELL_START (0)
#define IPI_DOORBELL_END (8)
#define IPI_DOORBELL_MASK 0xFF
#define PCI_MSI_DOORBELL_START (16)
#define PCI_MSI_DOORBELL_NR (16)
#define PCI_MSI_DOORBELL_END (32)
#define PCI_MSI_DOORBELL_MASK 0xFFFF0000
static void __iomem *per_cpu_int_base;
static void __iomem *main_int_base;
static struct irq_domain *armada_370_xp_mpic_domain;
static u32 doorbell_mask_reg;
static int parent_irq;
#ifdef CONFIG_PCI_MSI
static struct irq_domain *armada_370_xp_msi_domain;
static struct irq_domain *armada_370_xp_msi_inner_domain;
static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
static DEFINE_MUTEX(msi_used_lock);
static phys_addr_t msi_doorbell_addr;
#endif
static inline bool is_percpu_irq(irq_hw_number_t irq)
{
if (irq <= ARMADA_370_XP_MAX_PER_CPU_IRQS)
return true;
return false;
}
/*
* In SMP mode:
* For shared global interrupts, mask/unmask global enable bit
* For CPU interrupts, mask/unmask the calling CPU's bit
*/
static void armada_370_xp_irq_mask(struct irq_data *d)
{
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (!is_percpu_irq(hwirq))
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
else
writel(hwirq, per_cpu_int_base +
ARMADA_370_XP_INT_SET_MASK_OFFS);
}
static void armada_370_xp_irq_unmask(struct irq_data *d)
{
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (!is_percpu_irq(hwirq))
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
else
writel(hwirq, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
#ifdef CONFIG_PCI_MSI
static struct irq_chip armada_370_xp_msi_irq_chip = {
.name = "MPIC MSI",
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
static struct msi_domain_info armada_370_xp_msi_domain_info = {
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_MULTI_PCI_MSI),
.chip = &armada_370_xp_msi_irq_chip,
};
static void armada_370_xp_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
msg->address_lo = lower_32_bits(msi_doorbell_addr);
msg->address_hi = upper_32_bits(msi_doorbell_addr);
msg->data = 0xf00 | (data->hwirq + PCI_MSI_DOORBELL_START);
}
static int armada_370_xp_msi_set_affinity(struct irq_data *irq_data,
const struct cpumask *mask, bool force)
{
return -EINVAL;
}
static struct irq_chip armada_370_xp_msi_bottom_irq_chip = {
.name = "MPIC MSI",
.irq_compose_msi_msg = armada_370_xp_compose_msi_msg,
.irq_set_affinity = armada_370_xp_msi_set_affinity,
};
static int armada_370_xp_msi_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *args)
{
int hwirq, i;
mutex_lock(&msi_used_lock);
hwirq = bitmap_find_next_zero_area(msi_used, PCI_MSI_DOORBELL_NR,
0, nr_irqs, 0);
if (hwirq >= PCI_MSI_DOORBELL_NR) {
mutex_unlock(&msi_used_lock);
return -ENOSPC;
}
bitmap_set(msi_used, hwirq, nr_irqs);
mutex_unlock(&msi_used_lock);
for (i = 0; i < nr_irqs; i++) {
irq_domain_set_info(domain, virq + i, hwirq + i,
&armada_370_xp_msi_bottom_irq_chip,
domain->host_data, handle_simple_irq,
NULL, NULL);
}
return hwirq;
}
static void armada_370_xp_msi_free(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
mutex_lock(&msi_used_lock);
bitmap_clear(msi_used, d->hwirq, nr_irqs);
mutex_unlock(&msi_used_lock);
}
static const struct irq_domain_ops armada_370_xp_msi_domain_ops = {
.alloc = armada_370_xp_msi_alloc,
.free = armada_370_xp_msi_free,
};
static int armada_370_xp_msi_init(struct device_node *node,
phys_addr_t main_int_phys_base)
{
u32 reg;
msi_doorbell_addr = main_int_phys_base +
ARMADA_370_XP_SW_TRIG_INT_OFFS;
armada_370_xp_msi_inner_domain =
irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR,
&armada_370_xp_msi_domain_ops, NULL);
if (!armada_370_xp_msi_inner_domain)
return -ENOMEM;
armada_370_xp_msi_domain =
pci_msi_create_irq_domain(of_node_to_fwnode(node),
&armada_370_xp_msi_domain_info,
armada_370_xp_msi_inner_domain);
if (!armada_370_xp_msi_domain) {
irq_domain_remove(armada_370_xp_msi_inner_domain);
return -ENOMEM;
}
reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS)
| PCI_MSI_DOORBELL_MASK;
writel(reg, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
/* Unmask IPI interrupt */
writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
return 0;
}
#else
static inline int armada_370_xp_msi_init(struct device_node *node,
phys_addr_t main_int_phys_base)
{
return 0;
}
#endif
#ifdef CONFIG_SMP
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
static int armada_xp_set_affinity(struct irq_data *d,
const struct cpumask *mask_val, bool force)
{
irq_hw_number_t hwirq = irqd_to_hwirq(d);
unsigned long reg, mask;
int cpu;
/* Select a single core from the affinity mask which is online */
cpu = cpumask_any_and(mask_val, cpu_online_mask);
mask = 1UL << cpu_logical_map(cpu);
raw_spin_lock(&irq_controller_lock);
reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
reg = (reg & (~ARMADA_370_XP_INT_SOURCE_CPU_MASK)) | mask;
writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
raw_spin_unlock(&irq_controller_lock);
return IRQ_SET_MASK_OK;
}
#endif
static struct irq_chip armada_370_xp_irq_chip = {
.name = "MPIC",
.irq_mask = armada_370_xp_irq_mask,
.irq_mask_ack = armada_370_xp_irq_mask,
.irq_unmask = armada_370_xp_irq_unmask,
#ifdef CONFIG_SMP
.irq_set_affinity = armada_xp_set_affinity,
#endif
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
};
static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
unsigned int virq, irq_hw_number_t hw)
{
armada_370_xp_irq_mask(irq_get_irq_data(virq));
if (!is_percpu_irq(hw))
arm: mvebu: Fix the irq map function in SMP mode This patch fix the regression introduced by the commit 3202bf0157ccb "arm: mvebu: Improve the SMP support of the interrupt controller": GPIO IRQ were no longer delivered to the CPUs. To be delivered to a CPU an interrupt must be enabled at CPU level and at interrupt source level. Before the offending patch, all the interrupts were enabled at source level during map() function. Mask() and unmask() was done by handling the per-CPU part. It was fine when running in UP with only one CPU. The offending patch added support for SMP, in this case mask() and unmask() was done by handling the interrupt source level part. The per-CPU level part was handled by the affinity API to select the CPU which will receive the interrupt. (Due to some hardware limitation only one CPU at a time can received a given interrupt). For "normal" interrupt __setup_irq() was called when an irq was registered. irq_set_affinity() is called from this function, which enabled the interrupt on one of the CPUs. Whereas for GPIO IRQ which were chained interrupts, the irq_set_affinity() was never called and none of the CPUs was selected to receive the interrupt. With this patch all the interrupt are enable on the current CPU during map() function. Enabling the interrupts on a CPU doesn't depend anymore on irq_set_affinity() and then the chained irq are not anymore a special case. However the CPU which will receive the irq can still be modify later using irq_set_affinity(). Tested with Mirabox (A370) and Openblocks AX3 (AXP), rootfs mounted over NFS, compiled with CONFIG_SMP=y/N. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reported-by: Ryan Press <ryan@presslab.us> Investigated-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ryan Press <ryan@presslab.us> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-05 20:32:52 +08:00
writel(hw, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
else
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
if (is_percpu_irq(hw)) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_percpu_devid_irq);
} else {
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_level_irq);
}
irq_set_probe(virq);
return 0;
}
static void armada_xp_mpic_smp_cpu_init(void)
{
u32 control;
int nr_irqs, i;
control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
nr_irqs = (control >> 2) & 0x3ff;
for (i = 0; i < nr_irqs; i++)
writel(i, per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
/* Clear pending IPIs */
writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Enable first 8 IPIs */
writel(IPI_DOORBELL_MASK, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
/* Unmask IPI interrupt */
writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
static void armada_xp_mpic_perf_init(void)
{
unsigned long cpuid = cpu_logical_map(smp_processor_id());
/* Enable Performance Counter Overflow interrupts */
writel(ARMADA_370_XP_INT_CAUSE_PERF(cpuid),
per_cpu_int_base + ARMADA_370_XP_INT_FABRIC_MASK_OFFS);
}
#ifdef CONFIG_SMP
static void armada_mpic_send_doorbell(const struct cpumask *mask,
unsigned int irq)
{
int cpu;
unsigned long map = 0;
/* Convert our logical CPU mask into a physical one. */
for_each_cpu(cpu, mask)
map |= 1 << cpu_logical_map(cpu);
/*
* Ensure that stores to Normal memory are visible to the
* other CPUs before issuing the IPI.
*/
dsb();
/* submit softirq */
writel((map << 8) | irq, main_int_base +
ARMADA_370_XP_SW_TRIG_INT_OFFS);
}
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
static void armada_xp_mpic_reenable_percpu(void)
{
unsigned int irq;
/* Re-enable per-CPU interrupts that were enabled before suspend */
for (irq = 0; irq < ARMADA_370_XP_MAX_PER_CPU_IRQS; irq++) {
struct irq_data *data;
int virq;
virq = irq_linear_revmap(armada_370_xp_mpic_domain, irq);
if (virq == 0)
continue;
data = irq_get_irq_data(virq);
if (!irq_percpu_is_enabled(virq))
continue;
armada_370_xp_irq_unmask(data);
}
}
static int armada_xp_mpic_starting_cpu(unsigned int cpu)
{
armada_xp_mpic_perf_init();
armada_xp_mpic_smp_cpu_init();
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
armada_xp_mpic_reenable_percpu();
return 0;
}
static int mpic_cascaded_starting_cpu(unsigned int cpu)
{
armada_xp_mpic_perf_init();
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
armada_xp_mpic_reenable_percpu();
enable_percpu_irq(parent_irq, IRQ_TYPE_NONE);
return 0;
}
#endif
static const struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
.map = armada_370_xp_mpic_irq_map,
.xlate = irq_domain_xlate_onecell,
};
#ifdef CONFIG_PCI_MSI
static void armada_370_xp_handle_msi_irq(struct pt_regs *regs, bool is_chained)
{
u32 msimask, msinr;
msimask = readl_relaxed(per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& PCI_MSI_DOORBELL_MASK;
writel(~msimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
for (msinr = PCI_MSI_DOORBELL_START;
msinr < PCI_MSI_DOORBELL_END; msinr++) {
int irq;
if (!(msimask & BIT(msinr)))
continue;
if (is_chained) {
irq = irq_find_mapping(armada_370_xp_msi_inner_domain,
msinr - PCI_MSI_DOORBELL_START);
generic_handle_irq(irq);
} else {
irq = msinr - PCI_MSI_DOORBELL_START;
handle_domain_irq(armada_370_xp_msi_inner_domain,
irq, regs);
}
}
}
#else
static void armada_370_xp_handle_msi_irq(struct pt_regs *r, bool b) {}
#endif
static void armada_370_xp_mpic_handle_cascade_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long irqmap, irqn, irqsrc, cpuid;
unsigned int cascade_irq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE);
cpuid = cpu_logical_map(smp_processor_id());
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
irqsrc = readl_relaxed(main_int_base +
ARMADA_370_XP_INT_SOURCE_CTL(irqn));
/* Check if the interrupt is not masked on current CPU.
* Test IRQ (0-1) and FIQ (8-9) mask bits.
*/
if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid)))
continue;
if (irqn == 1) {
armada_370_xp_handle_msi_irq(NULL, true);
continue;
}
cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn);
generic_handle_irq(cascade_irq);
}
chained_irq_exit(chip, desc);
}
static void __exception_irq_entry
armada_370_xp_handle_irq(struct pt_regs *regs)
{
u32 irqstat, irqnr;
do {
irqstat = readl_relaxed(per_cpu_int_base +
ARMADA_370_XP_CPU_INTACK_OFFS);
irqnr = irqstat & 0x3FF;
if (irqnr > 1022)
break;
if (irqnr > 1) {
handle_domain_irq(armada_370_xp_mpic_domain,
irqnr, regs);
continue;
}
/* MSI handling */
if (irqnr == 1)
armada_370_xp_handle_msi_irq(regs, false);
#ifdef CONFIG_SMP
/* IPI Handling */
if (irqnr == 0) {
u32 ipimask, ipinr;
ipimask = readl_relaxed(per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& IPI_DOORBELL_MASK;
irqchip: armada-370-xp: fix IPI race condition In the Armada 370/XP driver, when we receive an IRQ 0, we read the list of doorbells that caused the interrupt from register ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of IPIs that were generated. However, instead of acknowledging only the IPIs that were generated, we acknowledge *all* the IPIs, by writing ~IPI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. This creates a race condition: if a new IPI that isn't part of the ones read into the temporary "ipimask" variable is fired before we acknowledge all IPIs, then we will simply loose it. This is causing scheduling hangs on SMP intensive workloads. It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register has the following behavior: "A CPU write of 0 clears the bits in this field. A CPU write of 1 has no effect". This is what allows us to simply write ~ipimask to acknoledge the handled IPIs. Notice that the same problem is present in the MSI implementation, but it will be fixed as a separate patch, so that this IPI fix can be pushed to older stable versions as appropriate (all the way to 3.8), while the MSI code only appeared in 3.13. Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: stable@vger.kernel.org # v3.8+ Fixes: 344e873e5657e8dc0 'arm: mvebu: Add IPI support via doorbells' Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-26 00:26:44 +08:00
writel(~ipimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Handle all pending doorbells */
for (ipinr = IPI_DOORBELL_START;
ipinr < IPI_DOORBELL_END; ipinr++) {
if (ipimask & (0x1 << ipinr))
handle_IPI(ipinr, regs);
}
continue;
}
#endif
} while (1);
}
static int armada_370_xp_mpic_suspend(void)
{
doorbell_mask_reg = readl(per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
return 0;
}
static void armada_370_xp_mpic_resume(void)
{
int nirqs;
irq_hw_number_t irq;
/* Re-enable interrupts */
nirqs = (readl(main_int_base + ARMADA_370_XP_INT_CONTROL) >> 2) & 0x3ff;
for (irq = 0; irq < nirqs; irq++) {
struct irq_data *data;
int virq;
virq = irq_linear_revmap(armada_370_xp_mpic_domain, irq);
if (virq == 0)
continue;
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
data = irq_get_irq_data(virq);
if (!is_percpu_irq(irq)) {
/* Non per-CPU interrupts */
writel(irq, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
if (!irqd_irq_disabled(data))
armada_370_xp_irq_unmask(data);
} else {
/* Per-CPU interrupts */
writel(irq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irqchip/armada-370-xp: Re-enable per-CPU interrupts at resume time Commit d17cab4451df1 ("irqchip: Kill off set_irq_flags usage") changed the code of armada_370_xp_mpic_irq_map() from using set_irq_flags() to irq_set_probe(). While the commit log seems to imply that there are no functional changes, there are indeed functional changes introduced by this commit: the IRQ_NOAUTOEN flag is no longer cleared. This functional change caused a regression on Armada XP, which no longer works properly after suspend/resume because per-CPU interrupts remain disabled. This regression was temporarly worked around in commit 353d6d6c82e5d ("irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN"), but it is not the most satisfying solution. This commit implements the solution that was initially discussed with Thomas Gleixner. Due to how the hardware registers work, the irq-armada-370-xp cannot simply save/restore a bunch of registers at suspend/resume to make sure that the interrupts remain in the same state after resuming. Therefore, it relies on the kernel to say whether the interrupt is disabled or not, using the irqd_irq_disabled() function. This was all working fine while the IRQ_NOAUTOEN flag was cleared. With the change introduced by Rob Herring in d17cab4451df1, the IRQ_NOAUTOEN flag is now set for all interrupts. irqd_irq_disabled() returns false for per-CPU interrupts, and therefore our per-CPU interrupts are no longer re-enabled after resume. This commit fixes that by using irqd_irq_disabled() only for global interrupts, and using the newly introduced irq_percpu_is_enabled() for per-CPU interrupts. Also, it fixes a related problems that per-CPU interrupts were only re-enabled on the boot CPU and not other CPUs. Until now this wasn't a problem since on this platform, only the local timers are using per-CPU interrupts and the local timers of secondary CPUs are turned off/on during CPU hotplug before suspend, after after resume. However, since Linux 4.4, we are also be using per-CPU interrupts for the network controller, so we need to properly restore the per-CPU interrupts on secondary CPUs as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18 16:07:39 +08:00
/*
* Re-enable on the current CPU,
* armada_xp_mpic_reenable_percpu() will take
* care of secondary CPUs when they come up.
*/
if (irq_percpu_is_enabled(virq))
armada_370_xp_irq_unmask(data);
}
}
/* Reconfigure doorbells for IPIs and MSIs */
writel(doorbell_mask_reg,
per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
if (doorbell_mask_reg & IPI_DOORBELL_MASK)
writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
if (doorbell_mask_reg & PCI_MSI_DOORBELL_MASK)
writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
static struct syscore_ops armada_370_xp_mpic_syscore_ops = {
.suspend = armada_370_xp_mpic_suspend,
.resume = armada_370_xp_mpic_resume,
};
static int __init armada_370_xp_mpic_of_init(struct device_node *node,
struct device_node *parent)
{
struct resource main_int_res, per_cpu_int_res;
int nr_irqs, i;
u32 control;
BUG_ON(of_address_to_resource(node, 0, &main_int_res));
BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res));
BUG_ON(!request_mem_region(main_int_res.start,
resource_size(&main_int_res),
node->full_name));
BUG_ON(!request_mem_region(per_cpu_int_res.start,
resource_size(&per_cpu_int_res),
node->full_name));
main_int_base = ioremap(main_int_res.start,
resource_size(&main_int_res));
BUG_ON(!main_int_base);
per_cpu_int_base = ioremap(per_cpu_int_res.start,
resource_size(&per_cpu_int_res));
BUG_ON(!per_cpu_int_base);
control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
nr_irqs = (control >> 2) & 0x3ff;
for (i = 0; i < nr_irqs; i++)
writel(i, main_int_base + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
armada_370_xp_mpic_domain =
irq_domain_add_linear(node, nr_irqs,
&armada_370_xp_mpic_irq_ops, NULL);
BUG_ON(!armada_370_xp_mpic_domain);
irq_domain_update_bus_token(armada_370_xp_mpic_domain, DOMAIN_BUS_WIRED);
/* Setup for the boot CPU */
armada_xp_mpic_perf_init();
armada_xp_mpic_smp_cpu_init();
armada_370_xp_msi_init(node, main_int_res.start);
parent_irq = irq_of_parse_and_map(node, 0);
if (parent_irq <= 0) {
irq_set_default_host(armada_370_xp_mpic_domain);
set_handle_irq(armada_370_xp_handle_irq);
#ifdef CONFIG_SMP
set_smp_cross_call(armada_mpic_send_doorbell);
cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_ARMADA_XP_STARTING,
"irqchip/armada/ipi:starting",
armada_xp_mpic_starting_cpu, NULL);
#endif
} else {
#ifdef CONFIG_SMP
cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_ARMADA_XP_STARTING,
"irqchip/armada/cascade:starting",
mpic_cascaded_starting_cpu, NULL);
#endif
irq_set_chained_handler(parent_irq,
armada_370_xp_mpic_handle_cascade_irq);
}
register_syscore_ops(&armada_370_xp_mpic_syscore_ops);
return 0;
}
IRQCHIP_DECLARE(armada_370_xp_mpic, "marvell,mpic", armada_370_xp_mpic_of_init);