The global screen_info structure is used to communicate
data about the console from platform code to the console
driver, but is only defined on ARM if either the VGA or
dummy consoles are in use.
This changes the footbridge code so we don't try to access
this structure in case it is not defined, which prevents
a possible randconfig build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
The dc21285.c source file cannot be built when CONFIG_PCI is
disabled, because it calls a number of PCI core interfaces.
This changes the Makefile so we don't include this file in the
build if CONFIG_PCI is disabled. No other code references anything
defined inside of this file in this case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
The ARCH_EBSA285_ADDIN platform does not provide the
ISA_DMA API, which is required by the floppy driver.
Let's ensure that the floppy code can only be built
when ISA_DMA is also enabled, by moving the select
statement into ARCH_EBSA285_HOST.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
ARCH_RPC no longer supports other CPUs aside from StrongARM110,
so we can make the option implicitly selected by the platform
and no longer give the option of building a kernel without CPU
support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
The trizeps4 and trizeps4wl platforms are both implemented
using the same board file. Since the trizeps4wl code is a
superset of trizeps4, it makes no sense to enable just the
latter, but with the current Kconfig logic, it causes the
board file not to be built at all.
Selecting MACH_TRIZEPS4 from MACH_TRIZEPS4WL ensures that
we are actually building the board file.
Found during randconfig testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Mack <zonque@gmail.com>
The Arcom/Eurotech VIPER SBC enables the I2C_GPIO driver, but
that has a dependency on I2C, and causes build failures if I2C
is disabled. To keep existing configurations running while fixing
the randconfig problems, this changes the logic to only enable
I2C_GPIO if I2C is already enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Daniel Mack <zonque@gmail.com>
balloon3_udc_init() tries to register a balloon3_gpio_vbus
device, but this has never been defined in the mainline
kernel. To avoid the obvious build failure when this function
is enabled, remove the bogus reference here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Mack <zonque@gmail.com>
The colibri_ohci_init function performs a register access through
the io_p2v() macro, which requires the IOMEM macro to be defined.
By explicitly including the asm/io.h header file that contains
this macro, we avoid the build error:
arch/arm/mach-pxa/colibri-evalboard.c: In function 'colibri_ohci_init':
arch/arm/mach-pxa/colibri-evalboard.c:68:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Mack <zonque@gmail.com>
The SAAR and TAVOREVB machines try to call functions from
the PXAFB frame buffer driver from their platform code,
which only works if that driver is built-in.
This patch ensures that both the generic frame buffer
code and the specific pxafb driver are always enabled
when we build a kernel for one of the two boards.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Mack <zonque@gmail.com>
We normally don't hard-enable Kconfig options just because
a board contains a specific piece of hardware. In this case,
selecting SMC91X causes a build error, if we don't also enable
basic network device driver support.
Since the platform has no direct dependency on this driver
at link time, we can just remove the 'select' statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Mack <zonque@gmail.com>
The D-Link DNS-323 machine tries to unconditionally select CONFIG_PHYLIB,
but that has other dependencies that might not necessarily be enabled,
causing random build errors.
To work around this, this patch removes the 'select' statement and
instead uses a compile-time check to skip the phy_register_fixup_for_uid()
call if PHYLIB is not available in the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The definition for SIGBUS may not be visible without including
linux/signal.h, as I found during randconfig testing.
Adding an explicit include is certainly the right thing to do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The code for h2 and osk implicitly assumes that the tps65010
driver is built-in, in order to perform the initial regulator
setup.
This is fine for most real uses, but it does get into the way
of build testing with 'make randconfig', since we don't want
platforms to implicitly select device drivers and subsystems
such as I2C.
This patch by contrast changes the board files to not call
into the tps65010 driver when that is not built-in, allowing
us to build all configurations including some that will not
work properly on this hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
If CONFIG_OMAP_32K_TIMER isn't enabled, we will
try to use enable_dyn_sleep which wasn't defined
anywhere.
In order to fix the problem, we always define
enable_dyn_sleep as 0 when !CONFIG_OMAP_32K_TIMER.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The msm_sdcc MMC driver and the msm_serial_hs uart driver both
use the pre-dmaengine interfaces provided by the MSM platform.
Since these drivers can be loadable modules, we should export
the functions used in the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
MSM7X00A has an open-coded version of debug_ll_io_init so it
can use MT_DEVICE_NONSHARED as required by the platform.
However, this fails to build on no-MMU kernels because the
debug_ll_addr function is not available. Since the iotable_init
function doesn't actually do anyting in this configuration,
we can simply get away by enclosing the broken function call
in an #ifdef, which seems to be the least ugly workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
After the restructuring of the module.h and init.h headers,
we now need to include this explicitly here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
This symbol is used by the lpc_eth driver, which may
be a loadable module.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roland Stigge <stigge@antcom.de>
The 'og' machine tries to always initialized the PCI code, but that
may be disabled in Kconfig, leading to a build error.
This patch changes the code to use the same Kconfig symbol to decide
about calling the ks8695_init_pci function at build time that we
use to decide about building the ks8695 PCI support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Commit 098e30f655 "ARM: ixp4xx: stop broadcasting the custom GPIO API"
changed the internal gpio code of ixp4xx to be accessible only from
common.c, but unfortunately that broke the Goramo MultiLink code, which
uses this API.
This tries to restore the previous state without exposing the
API globally again. A better solution might be needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Imre Kaloz <kaloz@openwrt.org>
When using CONFIG_IXP4XX_INDIRECT_PCI, we run into a recursive
header file dependency between mach/io.h and asm/pci.h, resulting
in a build failure:
mach-ixp4xx/include/mach/io.h: In function 'is_pci_memory':
mach-ixp4xx/include/mach/io.h:53:18: error: 'PCIBIOS_MIN_MEM' undeclared (first use in this function)
return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
^
mach-ixp4xx/include/mach/io.h:53:18: note: each undeclared identifier is reported only once for each function it appears in
We can work around this by referencing the pcibios_min_mem variable
directly through an extern declaration, rather than using the macro.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
The omixp board code unconditionally defines a gpio-led
device, but for some reason includes the header file
for this only if CONFIG_LEDS_CLASS is enabled, causing
a build error otherwise.
Removing the #ifdef fixes the build error with no downsides
whatsoever.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
The hisi SMP code always uses the hi3xxx_set_cpu() function
defined in the hotplug.c file, so we cannot build without
this when CONFIG_SMP is enabled. This patch slightly restructures
the code so we always build the parts of hotplug.c that we need
but just leave out the CPU disable logic if CONFIG_HOTPLUG_CPU
is turned off.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
ep93xx_chip_revision is used by the pata_ep93xx driver,
which can be a loadable module. Exporting the symbol
avoids a link error in this case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
The efm32 platform does not provide a zreladdr-y line its Makefile.boot,
so we always have to use CONFIG_AUTO_ZRELADDR in order to successfully
build and link a zImage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Uwe Kleine-König <kernel@pengutronix.de>
The DAVINCI_DA850_EVM board uses an unusual method to
enable the GPIO_PCA953X and KEYBOARD_GPIO_POLLED symbols,
which leads to the dependencies on these symbols being
ignored. As GPIO_PCA953X actually requires I2C, that
can lead to build failures when I2C is disabled.
This patch removes the duplicate symbol definitions
and instead enables them from the davinci_all_defconfig
file.
A different question whether we actually want to automatically
enable them at all or rather put them into defconfig,
but that should be a separate patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: davinci-linux-open-source@linux.davincidsp.com
We cannot call phy_register_fixup_for_uid() if CONFIG_PHYLIB
is not built into the kernel, and we should not enforce that
to be built into vmlinux either, because one might want to
disable the entire network stack.
This change uses a compile-time condition on CONFIG_PHYLIB
to remove the call in the cases where it cannot work.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: davinci-linux-open-source@linux.davincidsp.com
It makes no sense for sama5 support to be enabled if we don't
also enable USE_OF. Making this automatic in Kconfig avoids
a possible randconfig conflict between the old and new clock
support code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
If CONFIG_PATA_AT91 is disabled, the code in at91_add_device_cf
is turned into invalid C statements due to the lack of an
expression before the 'else' clause.
This moves the first half of the condition inside of the #ifdef,
which seems to be what the author intended.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
The pata_at91 driver uses interfaces defined in the sam9_smc
platform code. Since the pata driver can be a loadable module,
we have to export those symbols in order to link cleanly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
at91x40 has no support for device tree, but Kconfig allows
us to enable CONFIG_OF anyway, causing a link error in the
at91 reset controller initialization.
The easiest fix is to adapt the existing #ifdef to omit
the broken code on at91x40 where it is never called anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
at91x40 is different from all the other at91 machines, and it is
impossible to build a kernel that works on both this SoC and
any of the others, even though it is possible to build a noMMU
kernel for any at91 machine.
By turning at91x40 into a separate top-level option, we explicitly
forbid enabling invalid configurations that include mutually exclusive
machines.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
The big series refactoring Exynos suspend to RAM handling missed the
cpuidle driver that is disabled in exynos_defconfig, leaving it
including old mach/pm_core.h header and using old s3c_cpu_resume symbol
instead of new exynos_cpu_resume, resulting in compilation failures with
CONFIG_ARCH_EXYNOS and CONFIG_CPU_IDLE enabled.
This patch fixes that silly mistake and performs necessary modification
to arhc/arm/exynos/cpuidle.c to make it compile again.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch fixes compilation failure due to missing explicit inclusion
of linux/serial_s3c.h in mach/pm-core.h, which contains definitions
required for further code in this header.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Remove some entries from Dalmore's device tree that attempt to set some
options which aren't supported for the drive_gma pin group.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The following options are enabled:
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
for the majority of use-cases. This can still be overridden by the cma
command-line option.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=ubYV
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.15-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/boards
Merge "ARM: tegra: defconfig updates for 3.15" from Stephen Warren:
The following options are enabled:
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
for the majority of use-cases. This can still be overridden by the cma
command-line option.
* tag 'tegra-for-3.15-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: defconfig updates
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables:
* host1x and eDP support on Tegra124.
* LCD panel support for a few Tegra20 devices and Venice2.
* Enables power down, SPI flash, and USB on Venice2.
* Documents which Dalmore revision is supported.
* Adds an I2C bus mux to Cardhu.
Additionally, Tegra124 is converted to use #address-cells=<2> since the
HW suports more than 32-bits of address space, and various cleanups are
included.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJTGiq1AAoJEMzrak5tbycxM48P/17/DY8vXhIGs7/BW0StsMOV
kr333+12dxBQB0kftHoOtTv4/WutV4jjKAJm+pRBdu/yJ2on9FKKu11Q3r5EjI/B
9GDk5JSyHRkSIFdzPx4f0QskklmDqJuXD+MNfiQIGC2pv/WQotLUd6rJLcVWE/bk
8oVFg4b1kAFB2RKqwMywOMPh3X5A6xQKz/yCNLbEYsQXk9p9Iri/nX0Wq6dNVVP/
qjbll69anJ4IjhCJO4ndrGPWob2GTQpB5a5YGl+0sSZGUEzX/dsCJRgKRrP/JjeC
mZDWEqRTkqs2g8ZdNdseqMEgW9aksGAT57UCHbVMEd+1szY9RXB2kbvlPdUaU2XL
oPQpF0dvh3/i/227vvgI8dK4Vo56TPvVWdyztZS1mHL59ouAR6CajRgAQP4Ra6Ug
4qNJt/CKqm1lRO4eDXgDwt7zL+vP3bL4Mpcc7mN3d45iTz4uRN0KFoUbz/B++Mii
20+Y5Qn1mZr6CukPcUcT1bivQR42DPQslidaEruaamoBg6Fnn+yNr3KhKcRwS4Xs
4LuW6D4Bi+DIFwztCtQYf7pkuVHziQGUc1LnAQPqXYurMKVvnjbSjSXCxUsclkUT
W6gaqZ9QKdjlELuuz97eO866uodZpHNZVxBlnuSaTpHZexRIkLWRHTUUFPtlL+AR
MJW+8QCUrR08we1WmjlC
=cniI
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Merge "ARM: tegra: device tree changes for 3.15" from Stephen Warren:
This enables:
- host1x and eDP support on Tegra124.
- LCD panel support for a few Tegra20 devices and Venice2.
- Enables power down, SPI flash, and USB on Venice2.
- Documents which Dalmore revision is supported.
- Adds an I2C bus mux to Cardhu.
Additionally, Tegra124 is converted to use #address-cells=<2> since the
HW suports more than 32-bits of address space, and various cleanups are
included.
* tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (21 commits)
ARM: dts: tegra: add PCIe interrupt mapping properties
ARM: tegra: use 2 address cells for Tegra124 DT
ARM: tegra: Rename as3722 node to pmic
ARM: tegra: Fix whitespace around '='
ARM: tegra: Enable USB on Venice2
ARM: tegra: Add Tegra124 USB support
ARM: tegra: Enable eDP for Venice2
ARM: tegra: Add Tegra124 eDP support
ARM: tegra: Add Tegra124 host1x support
ARM: tegra: Hook up SDMMC3 power-supply on Venice2
ARM: tegra: Overhaul Venice2 regulators
ARM: tegra: Combine VBUS enable pins into one node
ARM: tegra: Use "disabled" for status property
ARM: tegra: add SPI flash to Venice2 DT
ARM: tegra: enable PCA9546 on Cardhu
ARM: tegra: enable LCD panel on Ventana
ARM: tegra: enable LCD panel on Seaboard
ARM: tegra: add system-power-controller property for PMIC node
ARM: tegra: document which Dalmore revisions are supported
ARM: tegra: Properly sort clocks property
...
Signed-off-by: Olof Johansson <olof@lixom.net>
A couple of minor fixes, plus the removal of the EMC scaling driver,
which hasn't been active since we converted clocks to device tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=vOsC
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Merge "ARM: tegra: core SoC changes for 3.15" from Stephen Warren:
A couple of minor fixes, plus the removal of the EMC scaling driver,
which hasn't been active since we converted clocks to device tree.
* tag 'tegra-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Export I/O rail functions
ARM: tegra: remove tegra EMC scaling driver
ARM: tegra: don't timeout if CPU is powergated
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains a number of cleanups and enhancements for the
Trusted Foundations firmware used on production Tegra SoCs. The changes
allow kernels without TF support to run on HW that uses TF, albeit with
reduced functionality, and also fix the cpuidle feature.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=B/hn
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.15-tf' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Merge "ARM: tegra: Trusted Foundations work for 3.15" from Stephen Warren:
This pull request contains a number of cleanups and enhancements for the
Trusted Foundations firmware used on production Tegra SoCs. The changes
allow kernels without TF support to run on HW that uses TF, albeit with
reduced functionality, and also fix the cpuidle feature.
* tag 'tegra-for-3.15-tf' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: cpuidle: use firmware for power down
ARM: trusted_foundations: implement prepare_idle()
ARM: firmware: add prepare_idle() operation
ARM: firmware: enable Trusted Foundations by default
ARM: trusted_foundations: fallback when TF support is missing
ARM: trusted_foundations: fix vendor prefix typos
Signed-off-by: Olof Johansson <olof@lixom.net>
As suggested by Olof Johansson at
http://www.spinics.net/lists/arm-kernel/msg314009.html.
It be better just keeping a "ti,keystone" top-level compatible and
just using that to probe. If so we don't have to touch the file
for new boards in the future.
So use common "ti,keystone" compatible in keystone.c for all boards.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The UBIFS partition size was incorrectly defined as for 128M NAND,
but on k2hk-evm installed NAND flash size is 512M.
Hence, correct it.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The contents of this header file are not referenced anywhere in the
included .c files except in devs.c. Remove its inclusion. For devs.c,
explicitly include sizes.h header for SZ_* macros.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Remove the code that is not referenced anywhere. While at it also
remove incorrect file path.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
LDO3 and LDO23 need to be enabled in order for soft-reset to work.
Additionally LDO9 needs to be enabled for USB operations.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
MDMA1 can support both secure and non-secure AXI transactions. When this
is enabled in the kernel for boards that run in secure mode, we get
imprecise external aborts causing the kernel to oops.
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
Suggested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Some very recent change appears to have removed an implicit inclusion of
serial_s3c.h causing build failures due to references to UART registers
in the serial port restore code in next-20140318. Include it explicitly
to fix the build.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch restores the ability to receive wake-up events from internal
GIC interrupts, e.g. RTC tick or alarm interrupts.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Since Exynos SoCs does not follow most of the semantics of older SoCs
when configuring the system to enter sleep, there is no reason to rely
on the legacy Samsung PM core anymore.
This patch adds local Exynos suspend ops and removes all the code left
unnecessary. As a side effect, suspend support on Exynos becomes
multiplatform-friendly.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch simplifies Exynos PM initialization and makes it
multiplatform friendly by replacing initcalls used originally to invoke
all the initialization code with explicit function calls.
In addition, an useless subsys_interface is removed, as all its .add_dev
callback did was setting two function pointers.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
CONFIG_PM means that at least one of CONFIG_PM_SLEEP and
CONFIG_PM_RUNTIME is enabled, while multiple entries in
mach-exynos/Kconfig abused it to enable sleep- and runtime-specific
functionality.
This patch fixes this abuse by replacing dependencies on CONFIG_PM with
appropriate dependencies on either CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME,
whichever is appropriate.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To allow using Samsung PM memory check helpers on platforms that do not
use the legacy Samsung PM core, this patch moves prototypes of relevant
functions to plat/pm-common.h header.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To separate legacy PM code from generic helpers, this patch moves the
generic register save/restore helpers to a new file called pm-common.c
that is compiled always when CONFIG_PM_SLEEP is enabled, to allow
platforms that do not want to use the legacy PM code use the generic
helpers.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Not all Samsung SoC platforms are going to use the legacy Samsung PM
code enabled by CONFIG_SAMSUNG_PM_DEBUG. To allow using Samsung PM debug
helpers on such platforms, related code is moved to separate file and
a plat/pm-common.h header is added to separate legacy and generic code.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch removes one-line functions that was used just to pass
constant arguments to lower level functions. After previous patches the
need for those constants has been eliminated, so the main functions can
be called directly.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch modifies Samsung PM debug helpers to use a multiplatform
friendly way of getting base address of debug UART port, so instead
of using a per-mach static macro, a generic debug_ll_addr() helper
is used.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The only SoC that does not have DIVSLOT register is S3C2410, so instead
of exporting a variable for platforms to set if DIVSLOT register should
be preserved, it's enough to simply check whether we are running on
a S3C2410 instead.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Due to the S3C2410 SoC being quite different from other S3C24xx SoCs
in some aspects, such as availability of DIVSLOT register in its UART
blocks, there is a need sometimes to check whether we are running on
this SoC, not just the S3C24xx series. This patch adds soc_is_s3c2410()
helper function for this purpose.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Trying to resume l2x0 if it was not enabled before suspend leads to
system crash. This patch prevents this by checking if l2x0_regs_phys is
a valid pointer to l2x0 context data saved on initialization.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add generic compatible strings for Exynos4 and 5 platforms so that
future SoCs can use them if there is nothing extra/specific to be
differentiated.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Since there is very little difference between these two files,
they can be easily combined into one with necessary SoC checks.
While at it also merge the common.c file into this as it does
not have any other users.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
cpu_table was used to distinguish between different Exynos4 and 5
SoCs and based on the type do the initialization and io mapping.
exynos_init is dummy and no longer needed as we do a DT based booting.
By having a common io mapping function we can get rid of the whole
table and avoid populating it for every SoC.
Tested on Exynos4210, 5250 and 5420 based boards.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add helpers to check for Exynos4 and 5 family of SoCs.
This will eliminate comparing long list of SoCs and make
code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Reorganize code so that "plat/mfc.h" is no more referred
from mach-exynos directory.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Currently AUDITSYSCALL has a long list of architecture depencency:
depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
for simplicity.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com> (arm)
Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit)
Acked-by: Matt Turner <mattst88@gmail.com> (alpha)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Eric Paris <eparis@redhat.com>
On 03/15/2014 12:40 AM, Christoffer Dall wrote:
> On Fri, Mar 14, 2014 at 11:13:29AM +0530, Srivatsa S. Bhat wrote:
>> On 03/13/2014 04:51 AM, Christoffer Dall wrote:
>>> On Tue, Mar 11, 2014 at 02:05:38AM +0530, Srivatsa S. Bhat wrote:
>>>> Subsystems that want to register CPU hotplug callbacks, as well as perform
>>>> initialization for the CPUs that are already online, often do it as shown
>>>> below:
>>>>
[...]
>>> Just so we're clear, the existing code was simply racy as not prone to
>>> deadlocks, right?
>>>
>>> This makes it clear that the test above for compatible CPUs can be quite
>>> easily evaded by using CPU hotplug, but we don't really have a good
>>> solution for handling that yet... Hmmm, grumble grumble, I guess if you
>>> hotplug unsupported CPUs on a KVM/ARM system for now, stuff will break.
>>>
>>
>> In this particular case, there was no deadlock possibility, rather the
>> existing code had insufficient synchronization against CPU hotplug.
>>
>> init_hyp_mode() would invoke cpu_init_hyp_mode() on currently online CPUs
>> using on_each_cpu(). If a CPU came online after this point and before calling
>> register_cpu_notifier(), that CPU would remain uninitialized because this
>> subsystem would miss the hot-online event. This patch fixes this bug and
>> also uses the new synchronization method (instead of get/put_online_cpus())
>> to ensure that we don't deadlock with CPU hotplug.
>>
>
> Yes, that was my conclusion as well. Thanks for clarifying. (It could
> be noted in the commit message as well if you should feel so inclined).
>
Please find the patch with updated changelog (and your Ack) below.
(No changes in code).
From: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Subject: [PATCH] arm, kvm: Fix CPU hotplug callback registration
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Instead, the correct and race-free way of performing the callback
registration is:
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
init_cpu(cpu);
/* Note the use of the double underscored version of the API */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_notifier_register_done();
In the existing arm kvm code, there is no synchronization with CPU hotplug
to avoid missing the hotplug events that might occur after invoking
init_hyp_mode() and before calling register_cpu_notifier(). Fix this bug
and also use the new synchronization method (instead of get/put_online_cpus())
to ensure that we don't deadlock with CPU hotplug.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Instead, the correct and race-free way of performing the callback
registration is:
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
init_cpu(cpu);
/* Note the use of the double underscored version of the API */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_notifier_register_done();
Fix the hw-breakpoint code in arm by using this latter form of callback
registration.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Davinci boards tend to have older booloaders without DTB support.
Enable appended DTB support by default to allow DT booting on older
platforms. While there, also enable /proc/device-tree support for
easy verification of DT boot.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The kcmp system call was ported to ARM in
commit 3f7d1fe108
"ARM: 7665/1: Wire up kcmp syscall".
Fixes: 3f7d1fe108 ("ARM: 7665/1: Wire up kcmp syscall")
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Statements following return will never be executed.
This patch removes this code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch series adds basic uprobes support to ARM. It is based on
patches developed earlier by Rabin Vincent. That approach of adding
hooks into the kprobes instruction parsing code was not well received.
This approach separates the ARM instruction parsing code in kprobes out
into a separate set of functions which can be used by both kprobes and
uprobes. Both kprobes and uprobes then provide their own semantic action
tables to process the results of the parsing.
Two cpufreq notifiers CPUFREQ_RESUMECHANGE and CPUFREQ_SUSPENDCHANGE have
not been used for some time, so remove them to clean up code a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add DT data for OMAP3 N900 board. The board has the following displays:
lcd: LCD panel connected to OMAP's SDI output
tv: analog svideo
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sre@debian.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP3 IGEPv2 board. The board has the following displays:
dvi: uses TFP410 encoder to convert DPI to DVI
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP3 Beagle-xM board. The board has the following displays:
dvi: uses TFP410 encoder to convert DPI to DVI
tv: analog svideo
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP3 Beagle board. The board has the following displays:
dvi: uses TFP410 encoder to convert DPI to DVI
tv: analog svideo
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP4 SDP board. The board has the following displays:
lcd0: a command mode DSI panel connected to OMAP DSI1 encoder
lcd1: a command mode DSI panel connected to OMAP DSI2 encoder
hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
As there is no common panel framework in the kernel, we have OMAP
specific panel drivers. However, the DT data should be generic. This
brings the issue that some other platform could use the same panels, and
would need to create a driver with the same 'compatible' string as the
OMAP driver.
In the long run, we have to get a common panel framework. For the time
being, this patch solves the issue:
At early boot time, we go through the DT nodes looking for the panels
the kernel supports for OMAP. For each found node, the 'compatible'
string is prepended with "omapdss,", i.e. "sony,acx565akm" becomes
"omapdss,sony,acx565akm". The OMAP display drivers all have "omapdss,"
at the beginning of their compatible field.
This allows us to have generic DT data, but OMAP specific display
drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
The OMAP display architecture requires a bunch of platform devices which
are not created via .dts (for now). We also need to pass a few function
pointers and the DSS hardware version from the arch code to omapdss
driver.
This patch adds omapdss_init_of() function, called from board-generic at
init time, which handles those tasks.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP4 Pandaboard. The board has the following displays:
dvi: uses TFP410 encoder to convert DPI to DVI
hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP4 display subsystem, which contains the following
blocks:
dss - the wrapper/glue for the display modules
dispc - display controller
dsi - MIPI DSI encoder (two independent modules)
rfbi - MIPI DBI encoder
venc - analog TV encoder
hdmi - HDMI encoder
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP3 display subsystem, which contains the following
blocks:
dss - the wrapper/glue for the display modules
dispc - display controller
dsi - MIPI DSI encoder
rfbi - MIPI DBI encoder
venc - analog TV encoder
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Add DT data for OMAP2 display subsystem, which contains the following
blocks:
dss - the wrapper/glue for the display modules
dispc - display controller
rfbi - MIPI DBI encoder
venc - analog TV encoder
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Set 'ti,set-rate-parent' property for clocks in the dpll4_m4 clock
path, which is used for DSS functional clock. This fixes DSS driver's
clock rate configuration, which needs the rate to be propagated properly
to the divider node (dpll4_m4_ck).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
We need to use set-rate-parent for dpll4_m4 clock path, so use the
ti,fixed-factor-clock version which supports set-rate-parent property.
The set-rate-parent flag itself is set in the following patch, this one
just changes the clock driver to ti,fixed-factor-clock without any other
changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
OMAP3630 DPLL4 is different than on OMAP3430, in that it doesn't have
the x2 multiplier for its outputs. This is not currently reflected in
the clock DT data.
Fix the issue by setting the clock multiplier to 1 (instead of 2) for the
DPLL4 output clocks.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
The DSS fclk and iclk handles are named differently on OMAP3430 ES1 than
on later OMAP revisions. The ES1 has handles 'dss1_alwon_fck_3430es1'
and 'dss_ick_3430es1', whereas later revisions have similar names but
ending with 'es2'.
This means we don't have one clock handle to which we could refer to
when defining the DSS clocks.
However, as the namespaces are separate for ES1 and ES2+ OMAPs, we can
just rename the handles to 'dss1_alwon_fck' and 'dss_ick' for both ES1
and ES2+, removing the issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Using Rabin Vincent's ARM uprobes patches as a base, enable uprobes
support on ARM.
Caveats:
- Thumb is not supported
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David A. Long <dave.long@linaro.org>
Because the common underlying code for ARM kprobes and uprobes needs
to share a common architecrure-specific context structure, and because
the generic kprobes include file insists on defining this to a dummy
structure when kprobes is not configured, a new common structure is
required which can exist when uprobes is configured without kprobes.
In this case kprobes will define a dummy structure, but without the
define aliasing the two structure tags it will not affect uprobes and
the shared probes code.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Add an emulate flag into the instruction interpreter, primarily for uprobes
support.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Any more ARM kprobes/uprobes symbols which have "kprobe" in the name must be
changed to the more generic "probes" or other non-kprobes specific symbol.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change the name of kprobes_insn to probes_insn so it can be shared between
kprobes and uprobes without confusion.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change kprobe_emulate_none, kprobe_simulate_nop, and arm_kprobe_decode_init
function names to something more appropriate for code being shared
outside of the kprobes subsystem. Also, move the new arm_probes_decode_init
declaration out of the kprobes.h include file and into the probes.h include file.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
In preparation for sharing the ARM kprobes instruction interpreting
code with uprobes, make the symbols names less kprobes-specific.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Change the generic ARM probes code to pass in the opcode and architecture-specific
structure separately instead of using struct kprobe, so we do not pollute
code being used only for uprobes or other non-kprobes instruction
interpretation.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Make the instruction interpreter call back to semantic action functions
through a function pointer array provided by the invoker. The interpreter
decodes the instructions into groups and uses the group number to index
into the supplied array. kprobes and uprobes code will each supply their
own array of functions.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Move the thumb version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Move the arm version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Separate the kprobe-only definitions from the definitions needed by
both kprobes and uprobes.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Make sure includes in ARM kprobes sources are done explicitly. Do not
rely on includes from other includes.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Jon Medhurst <tixy@linaro.org>
Now we have additional two SOC/boards supported, so add
make file rule so that all device tree blobs can be build
for keystone with 'make dtbs'.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The control register range for clktsio interferes with clkaemifspi clock.
And it causes issues for NAND/AEMIF. So fix it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The domain register range for clkfftc1 has to be 0x0235004c
instead of 0x023504c0.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Merge "STi DT changes part 1 v2" from Srinivas Kandagatla:
Patches : 01-02 are DT patches, adding interrupt support to pin
controller driver, Driver changes are already going via Linus W's
pinctrl tree.
Patches: 03 - 06 are DT patches for reset/softreset controller. Reset
controller driver is Acked by Philipp Zabel.
Patches: 07, 08 are DT patches, adding Ethernet controller support
patches, actual driver changes are already in v3.14-rc4 via Dave Millers
net tree.
Patches: 09, 10 are DT patches for IR driver support, actual IR driver
is already available since v3.12. Reason for the delay is due to
dependency on reset controller driver/headers.
* tag 'DT-for-v3.15-part-1-v2' of git://git.stlinux.com/devel/kernel/linux-sti:
ARM: STi: STIH416: Add IR support.
ARM: STi: STIH415: Add IR support.
ARM: STi: STiH416: Add ethernet support.
ARM: STi: STiH415: Add ethernet support.
ARM: STi: STiH416: Add soft reset controller support.
ARM: STi: STiH416: Add reset controller support.
ARM: STi: STiH415: Add soft reset controller support.
ARM: STi: STiH415: Add reset controller support.
ARM: STi: STiH415: Add interrupt support for pin controller
ARM: STi: STiH416: Add interrupt support for pin controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- fix typo CONFIG_CPU_S3C2443 in Kconfig
- fix G3D regulator on because of entering low power mode
for exynos5250-arndale
- fix CONFIG_USB_EHCI_EXYNOS for exynos_defconfig
- fix initcall of mach-crag6410-module.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=tJNW
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical
Merge "Samsung non-critical fixes for v3.15" from Kukjin Kim:
- fix typo CONFIG_CPU_S3C2443 in Kconfig
- fix G3D regulator on because of entering low power mode
for exynos5250-arndale
- fix CONFIG_USB_EHCI_EXYNOS for exynos_defconfig
- fix initcall of mach-crag6410-module.c
* tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C64XX: mach-crag6410-module.c is not modular
ARM: exynos_defconfig: Update EHCI config entry
ARM: dts: Keep G3D regulator always on for exynos5250-arndale
ARM: S3C24XX: Fix typo CONFIG_CPUS_3C2443
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The USB host drivers need platform data to be defined on
pxa168 and pxa910, but the conditionals used in the devices.c
file only work if the drivers are built-in. This patch
fixes the definition by changing the #ifdef to #if IS_ENABLED(),
which works both for built-in and modular Kconfig symbols.
I found one specific problem using 'randconfig' builds, but
for consistency, this patch uses IS_ENABLED() for all Kconfig
symbols in these three files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Non-PCI devices can use the entire 32-bit range, PCI dittos are
limited to the first 64MiB.
Also actually setup coherent_dma_mask.
The patch has been verified on a board with 128MiB memory, one
ipx4xx_eth device and a e100 PCI device.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The grant mapping API does m2p_override unnecessarily: only gntdev needs it,
for blkback and future netback patches it just cause a lock contention, as
those pages never go to userspace. Therefore this series does the following:
- the bulk of the original function (everything after the mapping hypercall)
is moved to arch-dependent set/clear_foreign_p2m_mapping
- the "if (xen_feature(XENFEAT_auto_translated_physmap))" branch goes to ARM
- therefore the ARM function could be much smaller, the m2p_override stubs
could be also removed
- on x86 the set_phys_to_machine calls were moved up to this new funcion
from m2p_override functions
- and m2p_override functions are only called when there is a kmap_ops param
It also removes a stray space from arch/x86/include/asm/xen/page.h.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Suggested-by: Anthony Liguori <aliguori@amazon.com>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch adds dt entry for ahci sata controller and its
corresponding phy controller.phy node has been added w.r.t
new generic phy framework.
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds the device tree node for SSS module
found on Exynos5420 and Exynos5250
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Now that the SPI controllers are disabled by default for Exynos5250
there is no need to explicitly disable them in individual board files.
This hunk appears not to have been merged when doing the original
conversion, add it now.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch use ADC to get the temperature of SoC/battery by using NTC thermistor
driver in hwmon. NTC thermistor driver covnvert ADC's raw data to temperature
by using following variables:
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch move common dt data of interrupt combiner controller to
exynos4x12.dtsi. Each Exynos4x12 SoC has different number of interrput combiner
as following:
- Exynos4212 : interrput combiner 18(0 ~ 17)
- Exynos4412 : interrput combiner 20(0 ~ 19)
The exynos combiner driver initialize interrupt according to specific number
of interrput combiner.
- samsung,combiner-nr : The number of interrput combiners supported.
Also,
This patch arrange again the dt data according to register address
in exynos4212/exynos4412.dtsi.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch add GPS_ALIVE power domain for Exynos4x12 SoC. GPS_ALIVE power domain
include GPS_BLK for GPS IP. Exynos SoC used generic power-domain driver to
control power domain. After completed kernel booting, Exynos power-domain driver
disable un-used power domain to reduce power-consumption/leak.
If GPS_ALIVE power domain isn't registered to Exynos power-domain driver,
happen power-leakage because GPS_ALIVE_CONFIGURATION is default power on state.
- 0x10023D00 : GPS_ALIVE_CONFIGURATION register address
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
ARM CPU has its own performance profiling unit(PMU, Perforamnce Monitoring Unit).
This patch add PMU dt data to support PMU which count cache hit and miss events.
PMU interrput list of Exynos4212
- <2 2> : INTG2[2] - PMUIRQ[0] for CPU0
- <3 2> : INTG3[2] - PMUIRQ[1] for CPU1
PMU interrput list of Exynos4412
- <2 2> : INTG2[2], PMUIRQ[0] for CPU0
- <3 2> : INTG3[2], PMUIRQ[1] for CPU1
- <18 2> : INTG18[2], PMUIRQ[2] : CPU2
- <19 2> : INTG19[2], PMUIRQ[3] : CPU3
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch add ADC(Analog to Digital Converter)'s dt data to get raw data
with IIO subsystem. Usually, ADC is used to check temperature, jack type
and so on.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
With Marvell Dove now being part of the multi_v7 family, add some Dove
specific drivers to multi_v7 defconfig.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The prima2 platform code currently depends on the rstc
implementation and that in turn depends on the reset
controller framework. This removes the platform dependency
by letting the driver access arm_pm_restart directly
to turn the driver into a standalone entity, and also
removes the dependency on the reset controller framework
by using "if (IS_ENABLED(CONFIG_RESET_CONTROLLER))". This
will cause all code that is used for the reset controller
to be dropped by the compiler if the framework is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This resolves a merge issue with drivers/staging/cxt1e1/linux.c that was
fixed in a report from Stephen Rothwell
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable BCM590xx MFD and regulator drivers to manage voltage
regulators on BCM281xx platforms.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
- some updates on the defconfig front
- two SoCs converted to Device Tree: sam9261 and sam9rl
(with use of CCF!)
- a little PWM clock update that goes on top of this
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJTIJ7GAAoJEAf03oE53VmQ3xgIAMtWSo91ENlnr38ZtEN+J71j
lrUdI/0sfv4pY2Dw0VbrnFS4hNmvM25C4dIR7SxU3iOnIC0vzzkPqs2hdRHwUY6y
pw9NsnF3kW950vf/M6nDmHxQpwKZOCpABs5EDjO6S4Ky6sze4IPog+vb5Y7ovGCl
LSqL9col3RCHIGyBWq77T3/NbWKOrz67Fy3eqJRyio7H8zYaEGnIrm2jPXYwtToT
/FB9sZUunjYwdTRdGNhRiTHWktwlr4i4f8woHTZg85MGKY6DOsZgxzUvCXdGBeJx
XaQ70hE8BF78Lglx8WUBgxowxJ1FvehxxcfzoYAVafwMlik+tSd3l0Zq3Sf6xD8=
=Q3FC
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
Merge "First batch of AT91 cleanup for 3.15" from Nicolas Ferre:
- some updates on the defconfig front
- two SoCs converted to Device Tree: sam9261 and sam9rl
(with use of CCF!)
- a little PWM clock update that goes on top of this
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
ARM: at91: add PWM clock
ARM: at91: move sam9261 SoC to common clk
ARM: at91: prepare common clk transition for sam9261 SoC
ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
ARM: at91: dt: Add at91sam9261 dt SoC support
ARM: at91: switch sam9rl to common clock framework
ARM: at91/dt: define main clk frequency of at91sam9rlek
ARM: at91/dt: define at91sam9rl clocks
ARM: at91: prepare common clk transition for sam9rl SoCs
ARM: at91: prepare sam9 dt boards transition to common clk
ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
ARM: at91: Add at91sam9rl DT SoC support
ARM: at91: prepare at91sam9rl DT transition
ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
ARM: at91/defconfig: remove useless configuration in at91sam9260_9g20_defconfig
ARM: at91/defconfig: refresh at91sam9rl_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes the following BUG:
> kernel BUG at mm/vmalloc.c:1132!
> PC is at vm_area_add_early+0x20/0x84
> LR is at add_static_vm_early+0xc/0x60
>
> The problem is cns3xxx_pcie_init() (device_initcall) calls the "early"
> iotable_init().
Instead of merely calling the PCIe iotable_init() from
machine_desc->map_io(), this patch adds the required mappings to the
main CNS3xxx mapping table. This means we don't convert .pfn back to
virtual addresses in pcie.c. The size of the address space consumed for
PCIe control is reduced from 96 MiB (6 * 16 MiB) to about 32 MiB (this
doesn't include MMIO address space required by PCI devices):
- Size of the PCIe "host" mapping is reduced from 16 MiB to 4 KiB.
It's a PCI configuration address space for the local (on-chip) PCIe
bridge.
- Size of the "CFG0" mapping is reduced from 16 MiB to 64 KiB. It's for
Type 0 Configuration accesses, i.e., accesses to the single device
(with possible "functions") on the other end of the PCIe link.
We really only need a 4 KiB page at 0x8000 (see the offset
calculation in cns3xxx_pci_cfg_base()). There is still a potential
problem with PCI bus numbers > 0xF, are they supported?
- The code in cns3xxx_pci_cfg_base() and cns3xxx_pcie_hw_init() should
be clearer now.
- The maximum address space allocated for PCI MMIO is now correctly
shown in /proc/iomem as 176 MiB (per each of the two PCI "domains"
- previously only 16 MiB were reserved).
This patch has been tested on Gateworks Laguna board, masqueraded as
CNS3420VB.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
WARNING: at drivers/irqchip/irq-gic.c:952 gic_init_bases+0xe4/0x2b8()
Cannot allocate irq_descs @ IRQ16, assuming pre-allocated
Backtrace:
gic_init_bases from cns3xxx_init_irq+0x24/0x34
cns3xxx_init_irq from init_IRQ+0x24/0x2c
init_IRQ from start_kernel+0x1a8/0x338
start_kernel from 0x2000806c
The problem is that 64 CNS3xxx CPU interrupts, starting at 32, are
allocated by the ARM platform-independent code (as requested by
machine_desc->nr_irqs = 96), and then the GIC code tries to allocate
them again.
Tested on Gateworks Laguna board, masqueraded as CNS3420VB.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=NkqH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Merge "omap fixes for v3.15 merge window" from Tony Lindgren:
Fixes for omaps that would be good to get in before v3.15-rc1.
* tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: correct the idlemodes for spinlock
ARM: dts: am33xx: correcting dt node unit address for usb
ARM: dts: omap4/5: Use l3_ick for the gpmc node
CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks
ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM
ARM: OMAP2+: INTC: Acknowledge stuck active interrupts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are sent separately from the rest of the .dts changes
as these depend on the fixes merged into v3.14-rc4, and
needed a bit more time to get updated on the fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=rAdr
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Updates to the .dts files to support more Gumstix boards.
These are sent separately from the rest of the .dts changes
as these depend on the fixes merged into v3.14-rc4, and
needed a bit more time to get updated on the fixes.
* tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add support for the Overo Summit
ARM: dts: Add support for the Overo Chestnut43
ARM: dts: Add support for the Overo Alto35
ARM: dts: Add support for the Overo Gallop43
ARM: dts: Add support for the Overo Palo43
ARM: dts: overo: Add LIS33DE accelerometer
ARM: dts: overo: Create a file for common Gumstix peripherals
ARM: dts: overo: Push uart3 pinmux down to expansion board
ARM: dts: omap3-tobi: Add AT24C01 EEPROM
ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221
ARM: dts: omap: Add common file for SMSC9221
ARM: dts: omap3-overo: Add HSUSB PHY
ARM: dts: omap3-overo: Enable WiFi/BT combo
ARM: dts: omap3-overo: Add missing pinctrl
ARM: dts: omap3-tobi: Add missing pinctrl
ARM: dts: overo: reorganize include files
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Conflicts:
arch/arm/boot/dts/omap3-overo.dtsi
Move of_clk_init() from clock driver to enable
options not to use zynq clock driver.
Use for example fixed clock setting.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
is finally getting updated. Also few trivial board related
.dts updates to add more devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=5f7K
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "omap device tree changes for v3.15, part 3" from Tony Lindgren:
Device tree related changes to the omap iommu driver as that
is finally getting updated. Also few trivial board related
.dts updates to add more devices.
* tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
ARM: dts: am335x-evmsk: enable DMA controller for USB
ARM: dts: OMAP5: Add IOMMU nodes
ARM: dts: OMAP4: Add IOMMU nodes
ARM: dts: OMAP3: Add IVA IOMMU node
ARM: dts: OMAP3: Update ISP IOMMU node
ARM: OMAP2+: extend iommu pdata-quirks to OMAP5
ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
ARM: OMAP2+: use pdata quirks for iommu reset lines
ARM: OMAP2+: change the ISP device archdata MMU name for DT
ARM: OMAP3: fix iva mmu programming issues
ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME
- Addition of the I2C for the A31
- Addition USB Host mode for the A10, A10s, A13 and A20
- Addition of SATA support for the A10 and A20
- Change of compatible for the watchdog
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=8O2D
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux into next/dt
Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard:
- Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME
- Addition of the I2C for the A31
- Addition USB Host mode for the A10, A10s, A13 and A20
- Addition of SATA support for the A10 and A20
- Change of compatible for the watchdog
* tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits)
ARM: sunxi: dt: Update the watchdog compatibles
ARM: sun6i: colombus: Enable the I2C controllers
ARM: sun6i: Enable the I2C muxing options
ARM: sun6i: Enable the I2C controllers
ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board
ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts
ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts
ARM: sun7i: dt: Add USB host nodes to cubietruck dts
ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro
ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro
ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino
ARM: sun4i: dt: Add USB host nodes to pcduino.dts
ARM: sun4i: dt: Add USB host nodes to mini-xplus dts
ARM: sun4i: dt: Add USB host nodes to hackberry dts
ARM: sun4i: dt: Add USB host nodes to cubieboard dts
ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts
ARM: sun7i: dt: Add USB host bindings
ARM: sun5i: dt: Add USB host bindings
ARM: sun4i: dt: Add USB host bindings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
enabling all ARMv5 davinci devices to be built
using davinci_all_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJTGIbzAAoJEGFBu2jqvgRNCucP/0MuU0Y+Uk3AmBlbH5GBzk9i
ML4/5/QFKorsxShFlpaXaFRbd6peMFhNlaa+ZIDx4mI+EAFNQC29bsSZ0A4AuUi1
EqWvJIJYxUNfLhXQoK8ehdbUWeA4Qb2Sm9DW34Lzj05ScS8H+SMLQqqOz8twFY1D
cLfwBF6HOAH0LEhzdOQEzO6FiCDPt6+bn5rmljDhS7UTLumfjDItuxrccJzWLZxs
XVUf+bGMksMVtFLlOsWsKjkQX9Wk4uYbzNqHEuq1/c4UIIkPbYAjMqDzi7mlsXzX
tzfhdGhR9DUbSOT1ovV3ceOTLpcP/wa6/+yfUBh1M08WfsJ0vfyUiRt827BhaNTK
VTxEKRoD/B0Lhu4K8DpoWQ+VDHGySjFcRI9djYR3U9t6ci3fXUExLjVbZDkDxG5h
tGq2iNlhLnnEKXdqbvWSpBsxa17UP3Y3unlAfHzl3sLZE82Gyd0Xhu3YwKYoSAYa
EbzfyqDIe4Rf+u2ZUHwyy4y3YlEGZdTKgOeyH8ZmudmkB6nUtmijfChXpgCYvkoF
+PSrvU9rnq/AxEo2YgxTbAzYU0nJxPo41wTg/VbH6aDSIRyfxE3P6FSPeHyc5O3u
DSmWXJ4suZMPt+WOSOHXC4UsHsfIU/zvdtn7zhqyNJrbDCcf2PqQ7CdT9zeitEuG
7KaszW59BI3bpBo0sizF
=Jdld
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.15/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Merge "DaVinci SoC updates for v3.15" from Sekhar Nori:
This pull request removes da8xx_omapl_defconfig
enabling all ARMv5 davinci devices to be built
using davinci_all_defconfig
* tag 'davinci-for-v3.15/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: remove da8xx_omapl_defconfig
ARM: davinci: da8xx: fix multiple watchdog device registration
ARM: davinci: add da8xx specific configs to davinci_all_defconfig
ARM: davinci: enable da8xx build concurrently with older devices
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tnetv107x support does not compile, and seems to have been broken
for a while with nobody caring to fix it. So far everyone I asked
said it's probably dead and completely unused and will never again
be needed in a future kernel release, so let's delete it.
If someone finds a use for this code later and is able to get it
to work again, we can always revert the removal.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
- Add bcm21664 support
- Use Kona Debug UART only on ARCH_BCM_MOBILE
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bmN2
-----END PGP SIGNATURE-----
Merge tag 'armsoc/for-3.15/soc-3' of git://github.com/broadcom/mach-bcm into next/soc
Merge "ARM: mach-bcm: soc updates for 3.15 - part 2" from Matt Porter:
- Add bcm21664 support
- Use Kona Debug UART only on ARCH_BCM_MOBILE
* tag 'armsoc/for-3.15/soc-3' of git://github.com/broadcom/mach-bcm:
ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
ARM: bcm21664: Add board support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just a minor commit to adjust the restart code to take into account the new
compatibles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=foO/
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-3.15' of https://github.com/mripard/linux into next/soc
Merge "Allwinner core additions for 3.15" from Maxime Ripard:
Just a minor commit to adjust the restart code to take into account the new
compatibles
* tag 'sunxi-core-for-3.15' of https://github.com/mripard/linux:
ARM: sunxi: Add the new watchog compatibles to the reboot code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables SPI and SID drivers in sunxi defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=lt83
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-3.15' of https://github.com/mripard/linux into next/boards
Merge "Allwinner defconfig additions for 3.15" from Maxime Ripard:
Enables SPI and SID drivers in sunxi defconfig
* tag 'sunxi-defconfig-for-3.15' of https://github.com/mripard/linux:
ARM: sunxi: Enable A31 SPI and SID in the defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of lines in multi_v5_defconfig appear twice,
causing a harmless Kconfig warning. This removes one
of the two copies.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper:
- mvebu
- 38x
- add 2GHz fixed clock, core divider clock, and nand controller
- 385
- add nand controller and partitions to 385-DB board
* tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable NAND controller in Armada 385-DB
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper:
- dove
- add system controller node
- drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI
- mvebu
- XP/370
- change default PCIe apertures
- switch GP and DB boards internal registers to 0xf1000000
- correct RAM size on Matrix board
- 385
- correct phy connection type for DB board
- add RD board
* tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu:
ARM: dove: drop pinctrl PMU reg property
ARM: mvebu: add Device Tree for the Armada 385 RD board
ARM: mvebu: use the correct phy connection mode on Armada 385 DB
ARM: mvebu: the Armada XP Matrix board has 4 GB
ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
ARM: mvebu: change the default PCIe apertures for Armada 370/XP
ARM: dove: add system controller node
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dts Makefile has a bunch of nasty conflicts, attempt to resolve
these now to avoid trouble later.
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- mvebu
- merge armada 375, 380, 385 boards (mvebu/dt-3xx)
- kirkwood
- Add many Synology NAS boards
- add board HP T5325
- add L2 cache node
- add system-controller node
- add audio node
- dove
- add pinctrl and global-config register
Depends:
- tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes)
- removed dove PMU interrupt controller
Conflicts:
- mvebu/soc (arch/arm/boot/dts/Makefile)
- add/add conflict.
- move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=38NX
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper:
- mvebu
- merge armada 375, 380, 385 boards (mvebu/dt-3xx)
- kirkwood
- Add many Synology NAS boards
- add board HP T5325
- add L2 cache node
- add system-controller node
- add audio node
- dove
- add pinctrl and global-config register
Depends:
- tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes)
- removed dove PMU interrupt controller
Conflicts:
- mvebu/soc (arch/arm/boot/dts/Makefile)
- add/add conflict.
- move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD)
* tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu:
ARM: kirkwood: Add dts file describing HP T5325 thin client
ARM: kirkwood: Add i2c alias so setting bus number
ARM: kirkwood: Add audio node to kirkwood.dtsi
ARM: mvebu: select dtbs from MACH_ARMADA_*
ARM: dove: add global-config register node
ARM: dove: add additional pinctrl registers
ARM: mvebu: Instantiate system controller in kirkwood.dtsi
ARM: kirkwood: Instantiate L2 cache from DT.
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
ARM: Kirkwood: Add support for many Synology NAS devices
DT: i2c: Trivial: Add sii,s35390a
DT: Vendor prefixes: Add ricoh, qnap, sii and synology
ARM: dove: dt: revert PMU interrupt controller node
ARM: mvebu: add Device Tree for the Armada 385 DB board
ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs
ARM: mvebu: add Device Tree for the Armada 375 DB board
ARM: mvebu: add Device Tree description of the Armada 375 SoC
ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260
Conflicts:
Documentation/devicetree/bindings/vendor-prefixes.txt
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- dove
- move devicetree code from mach-dove/ to mach-mvebu/ :-)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2I0p
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-3.15-3' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu soc changes for v3.15 (incremental #3)" from Jason Cooper:
- dove
- move devicetree code from mach-dove/ to mach-mvebu/ :-)
* tag 'mvebu-soc-3.15-3' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: move DT Dove to MVEBU
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- mvebu
- Add Armada 375, 380 and 385 SoCs
- kirkwood
- move kirkwood DT support to mach-mvebu
- add mostly DT support for HP T5325 thin client
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=CtOj
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu into next/soc
Merge "mvebu soc changes for v3.15 (incremental pull #2)" from Jason Cooper:
- mvebu
- Add Armada 375, 380 and 385 SoCs
- kirkwood
- move kirkwood DT support to mach-mvebu
- add mostly DT support for HP T5325 thin client
* tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu:
ARM: kirkwood: Add HP T5325 thin client
ARM: kirkwood: select dtbs based on SoC
ARM: kirkwood: Remove redundant kexec code
ARM: mvebu: Armada 375/38x depend on MULTI_V7
ARM: mvebu: Simplify headers and make local
ARM: mvebu: Enable mvebu-soc-id on Kirkwood
ARM: mvebu: Let kirkwood use the system controller for restart
ARM: mvebu: Move kirkwood DT boards into mach-mvebu
ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU
ARM: Fix default CPU selection for ARCH_MULTI_V5
ARM: MM: Add DT binding for Feroceon L2 cache
ARM: orion: Move cache-feroceon-l2.h out of plat-orion
ARM: mvebu: Add ARCH_MULTI_V7 to SoCs
ARM: kirkwood: ioremap memory control register
ARM: kirkwood: ioremap the cpu_config register before using it.
ARM: kirkwood: Separate board-dt from common and pcie code.
ARM: kirkwood: Drop printing the SoC type and revision
ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT
ARM: kirkwood: Give pm.c its own header file.
ARM: mvebu: Rename the ARCH_MVEBU menu option
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
*Update SOCFPGA DTS to include ethernet, sd/mmc, and clock fixes
*Add stmmac ethernet glue layer
*Update socfpga_defconfig to include sd/mmc, and micrel_phy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0sQZ
-----END PGP SIGNATURE-----
Merge tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next into next/drivers
Merge "SOCFPGA updates for 3.15 version 2" from Dinh Nguyen:
*Update SOCFPGA DTS to include ethernet, sd/mmc, and clock fixes
*Add stmmac ethernet glue layer
*Update socfpga_defconfig to include sd/mmc, and micrel_phy
* tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next:
dts: socfpga: Add sysmgr node so the gmac can use to reference
dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
dts: socfpga: Update clock entry to support multiple parents
ARM: socfpga: Update socfpga_defconfig
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
net: stmmac: Add SOCFPGA glue driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix warnings due to improper printk formats in shared APMU code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=lvg7
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Third Round of Renesas ARM Based SoC Updates for v3.15" from Simon
Horman:
Fix warnings due to improper printk formats in shared APMU code.
* tag 'renesas-soc3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: APMU: Fix warnings due to improper printk formats
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
drivers/net/usb/r8152.c
drivers/net/xen-netback/netback.c
Both the r8152 and netback conflicts were simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode.
Then, FSI will be master mode if it was SND_SOC_DAIFMT_CBS_CFS.
This patch fixup platform settings too.
Then, it tidyups SND_SOC_DAIFMT_INV settings.
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The BCM28155-AP board has a bootloader that expects the camldo1
regulator to be enabled on entry. Currently, the camldo1 regulator
is disabled when no longer in use as is the case during a reboot /
warm reset. This causes the early bootloader to hang upon entry. Add
regulator-always-on to the camldo1 constraint to fix reboot.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Add a dtsi to support the BCM590xx PMUs used by the BCM281xx family
of SoCs. Enable regulators for use with the dwc2 and sdhci on
bcm28155-ap.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Add device tree files for the Broadcom BCM21664 SoC.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Low-level debugging using the Broadcom Kona UART only makes sense on the
ARCH_BCM_MOBILE platform and would otherwise prevent ARCH_BCM_63XX from
picking up the right UART implementation by default.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Add support for the Broadcom BCM21664 mobile SoC. It has two Cortex-A9
cores like the BCM281xx family of chips. BCM21664 and BCM281xx share
many IP blocks in addition to the ARM cores.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Wolfram Sang pointed out during review of an efm32-i2c driver that the
property to specify the set of pins has a too general name. As several
other efm32 peripherals also have a similar register bit field, add an
"efm32" namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
While removing the 0x prefixes in the unit addresses in reply to a review
comment, I must somehow have messed up these two. Uups.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Switch the device tree to the new compatibles introduced in the irqchip drivers
to have a common pattern accross all Allwinner SoCs.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Armada 38x SoC family has a clock provider called "Core Divider",
derived from the fixed 2 GHz main PLL clock. This is similar to the
one on A370, A375 and AXP.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-4-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed
other clocks. This commit adds a DT representation of this clock
through a fixed-clock compatible node.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-3-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Use a meaningful name for the reference clocks so that it indicates the
function.
Update the OMAP4+ USB Host node as well to be in sync with the changes.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the proper clock name 'usbhost_120m_fck' instead of the
alias 'ehci_logic_fck'
Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data
as well.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.
This should avoid un-necessary clk_get failure messages that were
observed earlier.
Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.
Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The spinlock module's SYSCONFIG register does not support
smart wakeup, so remove this flag from the idle modes in
the spinlock hwmod definition.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DT node's unit address should be its own register offset address to make it a
unique across the system. This patch corrects the incorrect USB entries with
correct register offset for unit address.
Cc: stable@vger.kernel.org # v3.12+
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPMC clock is derived from l3_ick. The simplest solution is
to reference directly l3_ick to provide the GPMC fck in order to
get correct timings. The real management of the clock is left to
hwmod.
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Just like IS_PM34XX_ERRATUM, IS_PM44XX_ERRATUM is valid only if
CONFIG_PM is enabled, else, disabling CONFIG_PM results in build
failure complaining about the following:
arch/arm/mach-omap2/built-in.o: In function `omap4_boot_secondary':
:(.text+0x8a70): undefined reference to `pm44xx_errata'
Fixes: c962184 (ARM: OMAP4: PM: add errata support)
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.ocm>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When an interrupt has become active on the INTC it will stay active
until it is acked, even if masked or de-asserted. The
INTC_PENDING_IRQn registers are however updated and since these are
used by omap_intc_handle_irq to determine which interrupt to handle,
it will never see the active interrupt. This will result in a storm of
useless interrupts that is only stopped when another higher priority
interrupt is asserted.
Fix by sending the INTC an acknowledge if we find no interrupts to
handle.
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Now that the watchdog driver has new compatibles, we need to support them in
the machine reboot code.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The watchdog compatibles were following a different pattern than the one found
in the other devices. Now that the driver supports the right pattern, switch to
it in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Arnd Bergmann