The existing arm64 hcall implementations are limited in that they only
allow for two distinct hcalls; with the x0 register either zero or not
zero. Also, the API of the hyp-stub exception vector routines and the
KVM exception vector routines differ; hyp-stub uses a non-zero value in
x0 to implement __hyp_set_vectors, whereas KVM uses it to implement
kvm_call_hyp.
To allow for additional hcalls to be defined and to make the arm64 hcall
API more consistent across exception vector routines, change the hcall
implementations to reserve all x0 values below 0xfff for hcalls such
as {s,g}et_vectors().
Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS
to be used as hcall type specifiers and convert the existing
__hyp_get_vectors() and __hyp_set_vectors() routines to use these new
macros when executing an HVC call. Also, change the corresponding
hyp-stub and KVM el1_sync exception vector routines to use these new
macros.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Merged two hcall patches, moved immediate value from esr to x0, use lr
as a scratch register, changed limit to 0xfff]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Today the 'hvc' calling KVM or the hyp-stub is expected to preserve all
registers. KVM saves/restores the registers it needs on the EL2 stack using
do_el2_call(). The hyp-stub has no stack, later patches need to be able to
be able to clobber the link register.
Move the link register save/restore to the the call sites.
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We currently have macros defining flags for the arm64 sctlr registers in
both kvm_arm.h and sysreg.h. To clean things up and simplify move the
definitions of the SCTLR_EL2 flags from kvm_arm.h to sysreg.h, rename any
SCTLR_EL1 or SCTLR_EL2 flags that are common to both registers to be
SCTLR_ELx, with 'x' indicating a common flag, and fixup all files to
include the proper header or to use the new macro names.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Restored pgtable-hwdef.h include]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
To allow the assembler macros defined in arch/arm64/mm/proc-macros.S to
be used outside the mm code move the contents of proc-macros.S to
asm/assembler.h. Also, delete proc-macros.S, and fix up all references
to proc-macros.S.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
[rebased, included dcache_by_line_op]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Define ARCH_EFI_IRQ_FLAGS_MASK for arm64, which will enable the generic
runtime wrapper code to detect when firmware erroneously modifies flags
over a runtime services function call.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-38-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now there's a common template for {__,}efi_call_virt(), remove the
duplicate logic from the arm64 EFI code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-33-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allows the efifb driver to be built for ARM and arm64. This simply involves
updating the Kconfig dependency expression, and supplying dummy versions of
efifb_setup_from_dmi().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-25-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Unlike on 32-bit ARM, where we need to pass the stub's version of struct
screen_info to the kernel proper via a configuration table, on 64-bit ARM
it simply involves making the core kernel's copy of struct screen_info
visible to the stub by exposing an __efistub_ alias for it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-21-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Graphics Output Protocol code executes in the stub, so create a generic
version based on the x86 version in libstub so that we can move other archs
to it in subsequent patches. The new source file gop.c is added to the
libstub build for all architectures, but only wired up for x86.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-18-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call into the generic memory attributes table support code at the
appropriate times during the init sequence so that the UEFI Runtime
Services region are mapped according to the strict permissions it
specifies.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-15-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent UEFI versions expose permission attributes for runtime services
memory regions, either in the UEFI memory map or in the separate memory
attributes table. This allows the kernel to map these regions with
stricter permissions, rather than the RWX permissions that are used by
default. So wire this up in our mapping routine.
Note that in the absence of permission attributes, we still only map
regions of type EFI_RUNTIME_SERVICE_CODE with the executable bit set.
Also, we base the mapping attributes of EFI_MEMORY_MAPPED_IO on the
type directly rather than on the absence of the EFI_MEMORY_WB attribute.
This is more correct, but is also required for compatibility with the
upcoming support for the Memory Attributes Table, which only carries
permission attributes, not memory type attributes.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1461614832-17633-12-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Minor overlapping changes in the conflicts.
In the macsec case, the change of the default ID macro
name overlapped with the 64-bit netlink attribute alignment
fixes in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if the Armada 37xx does not any specific setup, the device tree
binding documentation requires to use a SoC-specific version
corresponding to the platform first followed by the generic version.
This patch introduce this new compatible string and updates the
documentation accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
No need to reflect the USB version in the node name.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
Instead of duplicating the SoC's node hierarchy, including a bus node
named "internal-regs", reference the actually desired nodes by label,
like Berlin already does. Add labels where necessary.
Drop an inconsistent white line while at it.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
The Hip06 soc has same cpu topology compared with Hip05, four clusters
and each cluster has quard Cortex-A57, but with different IO part,
like HNS, SAS and PCI, they are all upgraded. There are also not same
in ITS, MBIGEN and SMMU, etc.
This patch adds the initial dts for hip06 d03 board.
Note, there is no serial, because the soc use LPC uart, the serial node
is not needed.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch is to add support nor-flash. Notice, the pre-defined
partitions may not be used.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Fix commit abf9c25d55 ("arm64: dts: hip05: Append all gicv3 ITS
entries"), it forgets the property msi-cell, see arm,gic-v3.txt.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The default remains 127, which is good for most cases, and not even hit
most of the time, but then for some cases, as reported by Brendan, 1024+
deep frames are appearing on the radar for things like groovy, ruby.
And in some workloads putting a _lower_ cap on this may make sense. One
that is per event still needs to be put in place tho.
The new file is:
# cat /proc/sys/kernel/perf_event_max_stack
127
Chaging it:
# echo 256 > /proc/sys/kernel/perf_event_max_stack
# cat /proc/sys/kernel/perf_event_max_stack
256
But as soon as there is some event using callchains we get:
# echo 512 > /proc/sys/kernel/perf_event_max_stack
-bash: echo: write error: Device or resource busy
#
Because we only allocate the callchain percpu data structures when there
is a user, which allows for changing the max easily, its just a matter
of having no callchain users at that point.
Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2
caches/SCUs to their respective PM Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous
DDR regions that require 48-bit VA to have the linear map cover the entire
range of DDR.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When doing:
make defconfig
make savedefconfig
...without making any changes, the newly saved defconfig does
not match arch/arm64/configs/defconfig, and the diff looks
like:
$ diff defconfig arch/arm64/configs/defconfig
3a4
> CONFIG_FHANDLE=y
Clean that up by committing the output of savedefconfig.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the various disabled external clock nodes to default to a
frequency of 0, but don't disable them, to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It can be used for the watchdog.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
recent regressions. Changes are across several platforms, so
I'm listing every change separately here.
Regressions since 4.5:
- A correction of the psci firmware DT binding, to prevent
users from relying on unintended semantics
- Actually getting the newly merged clock driver for some OMAP
platforms to work
- A revert of patches for the Qualcomm BAM, these need to be
reworked for 4.7 to avoid breaking boards other than the one
they were intended for
- A correction for the I2C device nodes on the Socionext Uniphier
platform
- i.MX SDHCI was broken for non-DT platforms due to a change
with the setting of the DMA mask
- A revert of a patch that accidentally added a nonexisting
clock on the Rensas "Porter" board
- A couple of OMAP fixes that are all related to suspend after
the power domain changes for dra7
- On Mediatek, revert part of the power domain initialization
changes that broke mt8173-evb
Fixes for older bugs:
- Workaround for an "external abort" in the omap34xx
suspend/resume code.
- The USB1/eSATA should not be listed as an excon device on
am57xx-beagle-x15 (broken since v4.0)
- A v4.5 regression in the TI AM33xx and AM43XX DT specifying
incorrect DMA request lines for the GPMC
- The jiffies calibration on Renesas platforms was incorrect
for some modern CPU cores.
- A hardware errata woraround for clockdomains on TI DRA7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YgL2
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are the latest bug fixes for ARM SoCs, mostly addressing recent
regressions. Changes are across several platforms, so I'm listing
every change separately here.
Regressions since 4.5:
- A correction of the psci firmware DT binding, to prevent users from
relying on unintended semantics
- Actually getting the newly merged clock driver for some OMAP
platforms to work
- A revert of patches for the Qualcomm BAM, these need to be reworked
for 4.7 to avoid breaking boards other than the one they were
intended for
- A correction for the I2C device nodes on the Socionext Uniphier
platform
- i.MX SDHCI was broken for non-DT platforms due to a change with the
setting of the DMA mask
- A revert of a patch that accidentally added a nonexisting clock on
the Rensas "Porter" board
- A couple of OMAP fixes that are all related to suspend after the
power domain changes for dra7
- On Mediatek, revert part of the power domain initialization changes
that broke mt8173-evb
Fixes for older bugs:
- Workaround for an "external abort" in the omap34xx suspend/resume
code.
- The USB1/eSATA should not be listed as an excon device on
am57xx-beagle-x15 (broken since v4.0)
- A v4.5 regression in the TI AM33xx and AM43XX DT specifying
incorrect DMA request lines for the GPMC
- The jiffies calibration on Renesas platforms was incorrect for some
modern CPU cores.
- A hardware errata woraround for clockdomains on TI DRA7"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems
arm64: dts: uniphier: fix I2C nodes of PH1-LD20
ARM: shmobile: timer: Fix preset_lpj leading to too short delays
Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"
ARM: dts: r8a7791: Don't disable referenced optional clocks
Revert "ARM: OMAP: Catch callers of revision information prior to it being populated"
ARM: OMAP3: Fix external abort on 36xx waking from off mode idle
ARM: dts: am57xx-beagle-x15: remove extcon_usb1
ARM: dts: am437x: Fix GPMC dma properties
ARM: dts: am33xx: Fix GPMC dma properties
Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators"
ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask
ARM: DRA7: clockdomain: Implement timer workaround for errata i874
ARM: OMAP: Catch callers of revision information prior to it being populated
ARM: dts: dra7: Correct clock tree for sys_32k_ck
ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap
ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen
Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node"
Revert "dts: msm8974: Add blsp2_bam dma node"
ARM: dts: Add clocks for dm814x ADPLL
Enable ACPI by default to support testing of ACPI only systems and
ensure that defconfig will boot on anything, for arm64 this is not done
in Kconfig since a very large proportion of arm64 systems have no ACPI
at all.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Roy Franz <roy.franz@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The operating system driver can take advantage of the IOMMU to remove
the need for physically contiguous memory buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This clock is required for the GPU to operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If both ACPI and DT platform descriptions are available, and the
kernel was configured at build time to support both flavours, the
default policy is to prefer DT over ACPI, and preferring ACPI over
DT while still allowing DT as a fallback is not possible.
Since some enterprise features (such as RAS) depend on ACPI, it may
be desirable for, e.g., distro installers to prefer ACPI boot but
fall back to DT rather than failing completely if no ACPI tables are
available.
So introduce the 'acpi=on' kernel command line parameter for arm64,
which signifies that ACPI should be used if available, and DT should
only be used as a fallback.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The Marvell Armada 7K/8K support needs the AP806 and CP110 syscon
drivers to be enabled, as they provide amongst other things, the main
clocks for those platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit enables several interfaces of the CP side of the Armada
7040 for the Armada 7040 DB board:
- one PCIe interface
- one SPI controller with an attached SPI flash
- one I2C controller
- one SATA controller
- two USB3 controllers
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds an initial Device Tree description for the CP110
master that is found in the Armada 7K and 8K SoCs. This initial
description describes:
- the system controller (to provide clocks)
- three PCIe interfaces
- the SATA interface
- the I2C controllers
- the SPI controllers
For the record, the organization of the SoCs is as follows:
- 7020: dual-core AP, one CP110 (master)
- 7040: quad-core AP, one CP110 (master)
- 8020: dual-core AP, two CP110s (master and slave)
- 8040: quad-core AP, two CP110s (master and slave)
For this reason, all of the 7020, 7040, 8020 and 8040 include
armada-cp110-master.dtsi. When support for the second CP110 (slave)
used in 8020 and 8040 will be added, the .dtsi files for those SoCs
will in addition include armada-cp110-slave.dtsi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The I2C controller found in the Marvell Armada 7K/8K provides the
bridge/offloading features, so the Device Tree should use the
marvell,mv78230-i2c compatible string instead of marvell,mv64xxx-i2c.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit slightly improves the description of the SPI flash
connected to the SPI controller of the Armada 7040, by:
- Using the more generic "jedec,spi-nor" compatible string, which
lets the driver auto-detect the exact SPI flash type.
- Removing the silly comment about the Chip Select, since reg = <0>
is explicit enough.
- Switching to the new Device Tree binding to describe flash
partitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit updates the Marvell AP806 Device Tree description to make
use of the accepted clock Device Tree binding.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the necessary UART aliases to the main Armada 7K/8K
.dtsi file, and uses them to define the /chosen/stdout-path property
on the Armada 7040 DB board.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Node names should not contain an instance number, the unit address
serves to distinguish nodes of the same name. So rename the XOR nodes
to just xor@<address>.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas:
- remove labels, they are really not needed for XOR engines.
- remove the Fixes: tag, as this is not a fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.
Drop some trailing or inconsistent white lines while at it.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas: drop Fixes tag as it is not a bug fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
When booting a relocatable kernel image, there is no practical reason
to refuse an image whose load address is not exactly TEXT_OFFSET bytes
above a 2 MB aligned base address, as long as the physical and virtual
misalignment with respect to the swapper block size are equal, and are
both aligned to THREAD_SIZE.
Since the virtual misalignment is under our control when we first enter
the kernel proper, we can simply choose its value to be equal to the
physical misalignment.
So treat the misalignment of the physical load address as the initial
KASLR offset, and fix up the remaining code to deal with that.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For historical reasons, the kernel Image must be loaded into physical
memory at a 512 KB offset above a 2 MB aligned base address. The region
between the base address and the start of the kernel Image has no
significance to the kernel itself, but it is currently mapped explicitly
into the early kernel VMA range for all translation granules.
In some cases (i.e., 4 KB granule), this is unavoidable, due to the 2 MB
granularity of the early kernel mappings. However, in other cases, e.g.,
when running with larger page sizes, or in the future, with more granular
KASLR, there is no reason to map it explicitly like we do currently.
So update the logic so that the region is mapped only if that happens as
a side effect of rounding the start address of the kernel to swapper block
size, and leave it unmapped otherwise.
Since the symbol kernel_img_size now simply resolves to the memory
footprint of the kernel Image, we can drop its definition from image.h
and opencode its calculation.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When building a relocatable kernel, we currently rely on the fact that
early 64-bit literal loads need to be deferred to after the relocation
has been performed only if they involve symbol references, and not if
they involve assemble time constants. While this is not an unreasonable
assumption to make, it is better to switch to movk/movz sequences, since
these are guaranteed to be resolved at link time, simply because there are
no dynamic relocation types to describe them.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Implement a macro mov_q that can be used to move an immediate constant
into a 64-bit register, using between 2 and 4 movz/movk instructions
(depending on the operand)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Refactor the relocation processing so that the code executes from the
ID map while accessing the relocation tables via the virtual mapping.
This way, we can use literals containing virtual addresses as before,
instead of having to use convoluted absolute expressions.
For symmetry with the secondary code path, the relocation code and the
subsequent jump to the virtual entry point are implemented in a function
called __primary_switch(), and __mmap_switched() is renamed to
__primary_switched(). Also, the call sequence in stext() is aligned with
the one in secondary_startup(), by replacing the awkward 'adr_l lr' and
'b cpu_setup' sequence with a simple branch and link.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We can simply use a relocated 64-bit literal to store the address of
__secondary_switched(), and the relocation code will ensure that it
holds the correct value at secondary entry time, as long as we make sure
that the literal is not dereferenced until after we have enabled the MMU.
So jump via a small __secondary_switch() function covered by the ID map
that performs the literal load and branch-to-register.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This unexports some symbols from head.S that are only used locally.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTRw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
PCI: rcar-pcie: Remove Gen2 designation from Kconfig
- Enable Hi655x PMIC and regulator
- Enable SPI_SPIDEV as module
- Enable several common USB-Ethernet dongles
- Enable configs for WLAN and TI WL1835 as modules
- Enable ARM SP804 for ARCH_HISI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Q1Jq
-----END PGP SIGNATURE-----
Merge tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi into next/arm64
Merge "ARM64: Hi6220: configure updates for 4.7 based on rc3" from Wei Xu:
- Enable Hi655x PMIC and regulator
- Enable SPI_SPIDEV as module
- Enable several common USB-Ethernet dongles
- Enable configs for WLAN and TI WL1835 as modules
- Enable ARM SP804 for ARCH_HISI
* tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi:
arm64: Kconfig: select sp804 timer for ARCH_HISI
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
arm64: defconfig: enable several common USB network adapters
arm64: defconfig: add CONFIG_SPI_SPIDEV as module
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
Select sp804 timer for ARCH_HISI, which is used as broadcast timer.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch enables TI WL1835 and builds as module. It also enables
CFG80211, MAC80211, RFKILL and several CRYPTOs which are required
by WLAN.
96boards HiKey uses TI WLAN/BT combo module WL1835MOD.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm64 system is likely to be used as a host computer instead of
embedded devices and adding USB-Ethernet dongles to make it behave as
host PC is mandatory.
Changelog:
v2: Changed drivers to be as modules instead of built-in.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO
Since b) and c) are already in the 4.6-rc3, so kept a) only in this
patch and updated subject as well.
v2:
- rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
- set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Because debug dsaf port was separated from service dsaf port, this patch
updates the related configurations of hns dts, changes it to match with
the new binding files. This also removes enet nodes which don't exist in
d02 board.
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
updates to the fsl-mc node for full functionality:
-msi-parent is needed for interrupt support
-ranges is needed to enable the bus driver to translate bus addresses
-dpmac nodes provide a basis for relating dpmac objects to PHYs
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the disabled external scif clock node so that it
is not disabled to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: fix for v4.6 extracted from a larger patch targeted at v4.7]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Include the development base board, which is equipped with some
devices such as EEPROM.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6mn8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli:
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
* tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2 secondary core enablement via PSCI
arm64: dts: Add ARM PL022 SPI DT nodes for NS2
arm64: dts: Move NS2 clock DT nodes to separate DT file
arm64: dts: Add maintenance interrupt for GIC in NS2 DT
arm64: dts: Add ARM PL330 DMA DT node for NS2
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wnq5
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DTS changes queued for v4.7" from Duc Dang:
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
* tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Fix compatible string for X-Gene 2 SATA controller DTS node
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MpZ0
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add L2 cache topology to Hi6220
arm64: dts: register Hi6220's thermal zone for power allocator
arm64: dts: register Hi6220's thermal sensor
arm64: dts: add wifi nodes support for hi6220-hikey
arm64: dts: add dwmmc nodes for hi6220
arm64: dts: hikey: Add hi655x pmic dts node
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add Hi6220's stub clock node
arm64: dts: add mailbox node for Hi6220
arm64: dts: Add hi6220 usb node
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add Hi6220 spi configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: enable idle states for Hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: Reserve memory regions for hi6220
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ypy7
-----END PGP SIGNATURE-----
Merge tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT updates for v4.7" from Sudeep Holla:
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
* tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add external expansion bus to DT
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2hlL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Changes for v4.7-rc1" from Thierry Reding
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
* tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable cros-ec and charger on Smaug
arm64: tegra: Add pinmux for Smaug board
arm64: tegra: Add stdout-path for various boards
arm64: tegra: Remove unused #power-domain-cells property
arm64: tegra: Add gpio-keys nodes for Smaug
arm64: tegra: Enable power and volume keys on Jetson TX1
arm64: tegra: Add support for Google Pixel C
arm64: tegra: Replace legacy *,wakeup property with wakeup-source
arm64: tegra: Fix copy/paste typo in several DTS includes
arm64: tegra: Remove 0, prefix from unit-addresses
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lzL+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung Device Tree ARM64 updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
* tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: Add nodes for pdma0 and pdma1 for exynos7
arm64: dts: exynos: Add TMU node for exynos7
maxcpu=n sets the number of CPUs activated at boot time to a max of n,
but allowing the remaining CPUs to be brought up later if the user
decides to do so. However, on arm64 due to various reasons, we disallowed
hotplugging CPUs beyond n, by marking them not present. Now that
we have checks in place to make sure the hotplugged CPUs have compatible
features with system and requires no new errata, relax the restriction.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
CPU Errata work arounds are detected and applied to the
kernel code at boot time and the data is then freed up.
If a new hotplugged CPU requires a work around which
was not applied at boot time, there is nothing we can
do but simply fail the booting.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the capabilities are only available once all the CPUs
have booted, we're unable to check for a particular feature
in any subsystem that gets initialized before then.
In order to support this, introduce a local_cpu_has_cap() function
that tests for the presence of a given capability independently
of the whole framework.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[ Added preemptible() check ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[will: remove duplicate initialisation of caps in this_cpu_has_cap]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add scope parameter to the arm64_cpu_capabilities::matches(), so that
this can be reused for checking the capability on a given CPU vs the
system wide. The system uses the default scope associated with the
capability for initialising the CPU_HWCAPs and ELF_HWCAPs.
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The CHAIN event allows two 32-bit counters to be treated as a single
64-bit counter, under certain allocation restrictions on the PMU.
Whilst userspace could theoretically create CHAIN events using the raw
event syntax, we don't really want to advertise this in sysfs, since
it's useless in isolation. This patch removes the event from our /sys
entries.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Broadcom Vulcan uses ARMv8 PMUv3 and supports most of
the ARMv8 recommended implementation defined events.
Added Vulcan events mapping for perf and perf_cache map.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The complete common architectural and micro-architectural
event number structure is filtered based on PMCEIDn_EL0 and
exposed to /sys using is_visibile function pointer in events
attribute_group.
To filter the events in is_visible function, pmceid based bitmap
is stored in arm_pmu structure and the id field from
perf_pmu_events_attr is used to check against the bitmap.
The function which derives event bitmap from PMCEIDn_EL0 is
executed in the cpus, which has the pmu being initialized,
for heterogeneous pmu support.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
changed pmu register access to make use of <read/write>_sys_reg
from sysreg.h instead of accessing them directly.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Defined all the ARMv8 recommended implementation defined events
from J3 - "ARM recommendations for IMPLEMENTATION DEFINED event numbers"
in ARM DDI 0487A.g.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
changed all the common events name definition as per the document
ARM DDI 0487A.g
SoC specific event names follow the general naming style in
the file and doesn't reflect any document.
changed ARMV8_A53_PERFCTR_PREFETCH_LINEFILL to
ARMV8_A53_PERFCTR_PREF_LINEFILL to match with other SoC specific
event names which use _PREF_ style.
corrected typo l21 to l2i.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Improve the readability of dt_scan_depth1_nodes by removing the nested
conditionals.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When it's a Xen domain0 booting with ACPI, it will supply a /chosen and
a /hypervisor node in DT. So check if it needs to enable ACPI.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Annotate the KASAN shadow region with boundary markers, so that its
mappings stand out in the page table dumper output.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There is no need to initialize the vmemmap region boundaries dynamically,
since they are compile time constants. So just add these constants to the
global struct initializer, and drop the dynamic assignment and related code.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In order to be standard to manage for rockchip SoCs, move the thermal
data into rk3368 dtsi, we needn't to add a new file for thermal.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Declare PSCI-1.0 node and enable CPU_ON method via PSCI. Spin-table
memreserve has been removed as well as syscon based reset, as PSCI-1.0
expects reset implementation in firmware.
Signed-off-by: Luke Starrett <luke.starrett@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
that broke when we added runtime based SoC revision detection earlier.
It seems suspend worked earlier as things were only partially initialized,
while now we initialize things properly for dra7.
Note that the "ARM: OMAP: Catch callers of revision information prior
to it being populated" had to be reverted as it caused bogus warnings
for other SoCs because omap initcalls bail out based on revision being
set to 0 for other SoCs. These initcalls will mostly just disappear
when we drop support for omap3 legacy booting.
Also included is a fix for dra7 sys_32k_ck clock source that is not
enabled on boot making system fall back to using emulated clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXFkmvAAoJEBvUPslcq6VzmakQAKmjDs+iS02No6sQaIkBvadJ
gAL8EvAPZ5QLt6OW+MvFLiE42kr9NZSbvyLNLzjjqKI9AmuYZnrci8tQJ9uOHMLM
SmScTjE6b7PvGo2jI+IXkoi1hVL1YP7FKuA0/25EwNaeMKoZ7JPFJ/jpPatvIEg7
2TB6wk0rdlpGaaSx8uFR2ohDE8lA0gDNRDiHx7G2d9tl9rLLXC2IvS1YhpvLcGw0
IkRgFGF6+WZ09DZ+B1pnKPrf5wWBGqI44IWBL4epOCsDGxOYFjMix5or7FiaTrcP
8BGfOVJCRKGjccBvAFJLSznjMQb8jeTHkFxWY8BgY2FSuTJlFrbkxIBraFaZMqG/
9IOxPvjCJDgJdhGxHuQUGKzbQ2o7D7H5xb5PCxbdscHTcwi2WR6AXI6q+5v2ykqu
moQXvAPS2GcfVrgXcuIthwvqENExILTwogcgME8/6DvS0l7LlJ7bf1G32jsCvI3M
mw0+8GKx9qW+7demu6uy0uLiVI5cHfcTWp2ocLnXwnRVmixU5XG4QaPRp/MhB/QV
F57UxJFHH398zeZ8OgJFzjYwIT+60KCJNU+qMHdBdd76hiJ7Dg0rMxqoxLpbaB4t
fPbhuE/eUWvZR5IeL1I1M4dDgpp6KThGR86K1wHSMwWkq8Og+XoYMoU3yn0tyqT9
IHyBWPFAVpKI44uAle7w
=0X4E
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/fixes-rc2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v4.6-rc2" from Tony Lindgren
Fixes for omaps against v4.6-rc2, mostly to fix suspend for beagle-x15
that broke when we added runtime based SoC revision detection earlier.
It seems suspend worked earlier as things were only partially initialized,
while now we initialize things properly for dra7.
Note that the "ARM: OMAP: Catch callers of revision information prior
to it being populated" had to be reverted as it caused bogus warnings
for other SoCs because omap initcalls bail out based on revision being
set to 0 for other SoCs. These initcalls will mostly just disappear
when we drop support for omap3 legacy booting.
Also included is a fix for dra7 sys_32k_ck clock source that is not
enabled on boot making system fall back to using emulated clock.
* tag 'omap-for-v4.6/fixes-rc2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (198 commits)
Revert "ARM: OMAP: Catch callers of revision information prior to it being populated"
ARM: OMAP: Catch callers of revision information prior to it being populated
ARM: dts: dra7: Correct clock tree for sys_32k_ck
ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap
ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen
Linux 4.6-rc2
v4l2-mc: avoid warning about unused variable
Convert straggling drivers to new six-argument get_user_pages()
.mailmap: add Christophe Ricard
Make CONFIG_FHANDLE default y
mm/page_isolation.c: fix the function comments
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
mm/page_isolation: fix tracepoint to mirror check function behavior
mm/rmap: batched invalidations should use existing api
x86/mm: TLB_REMOTE_SEND_IPI should count pages
mm: fix invalid node in alloc_migrate_target()
include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock()
mm, kasan: fix compilation for CONFIG_SLAB
MAINTAINERS: orangefs mailing list is subscribers-only
net: mvneta: fix changing MTU when using per-cpu processing
...
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
When using the Virtualisation Host Extensions, EL1 is not used in
the host and requires no separate configuration.
In addition, with VHE enabled, non-hyp-specific EL2 configuration
that does not need to be done early will be done anyway in
__cpu_setup via the _EL1 system register aliases. In particular,
the layout and definition of CPTR_EL2 are changed by enabling VHE
so that they resemble CPACR_EL1, so existing code to initialise
CPTR_EL2 becomes architecturally wrong in this case.
This patch simply skips the affected initialisation code in the
non-VHE case.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With the IOMMU core now taking care of default domains for groups
regardless of bus type, we can gleefully rip out this stop-gap, as
slight recompense for having to expand the other one.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
PCI devices now suffer the same hiccup as platform devices, in that they
get their DMA ops configured before they have been added to their bus,
and thus before we know whether they have successfully registered with
an IOMMU or not. Until the necessary driver core changes to reorder
calls during device creation have been worked out, extend our delayed
notifier trick onto the PCI bus so as to avoid broken DMA ops once
IOMMUs get plugged into the PCI code.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we can handle stage-2 page tables independent
of the host page table levels, wire up the 16K page
support.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Now that we don't have any fake page table levels for arm64,
cleanup the common code to get rid of the dead code.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
On arm64, the hardware supports concatenation of upto 16 tables,
at entry level for stage2 translations and we make use that whenever
possible. This could lead to reduced number of translation levels than
the normal (stage1 table) table. Also, since the IPA(40bit) is smaller
than the some of the supported VA_BITS (e.g, 48bit), there could be
different number of levels in stage-1 vs stage-2 tables. To reuse the
kernel host page table walker for stage2 we have been using a fake
software page table level, not known to the hardware. But with 16K
translations, there could be upto 2 fake software levels (with 48bit VA
and 40bit IPA), which complicates the code. Hence, we want to get rid of
the hack.
Now that we have explicit accessors for hyp vs stage2 page tables,
define the stage2 walker helpers accordingly based on the actual
table used by the hardware.
Once we know the number of translation levels used by the hardware,
it is merely a job of defining the helpers based on whether a
particular level is folded or not, looking at the number of levels.
Some facts before we calculate the translation levels:
1) Smallest page size supported by arm64 is 4K.
2) The minimum number of bits resolved at any page table level
is (PAGE_SHIFT - 3) at intermediate levels.
Both of them implies, minimum number of bits required for a level
change is 9.
Since we can concatenate upto 16 tables at stage2 entry, the total
number of page table levels used by the hardware for resolving N bits
is same as that for (N - 4) bits (with concatenation), as there cannot
be a level in between (N, N-4) as per the above rules.
Hence, we have
STAGE2_PGTABLE_LEVELS = PGTABLE_LEVELS(KVM_PHYS_SHIFT - 4)
With the current IPA limit (40bit), for all supported translations
and VA_BITS, we have the following condition (even for 36bit VA with
16K page size):
CONFIG_PGTABLE_LEVELS >= STAGE2_PGTABLE_LEVELS.
So, for e.g, if PUD is present in stage2, it is present in the hyp(host).
Hence, we fall back to the host definition if we find that a level is not
folded. Otherwise we redefine it accordingly. A build time check is added
to make sure the above condition holds. If this condition breaks in future,
we can rearrange the host level helpers and fix our code easily.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Now that we have switched to explicit page table routines,
get rid of the obsolete kvm_* wrappers.
Also, kvm_tlb_flush_vmid_by_ipa is now called only on stage2
page tables, hence get rid of the redundant check.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Introduce hyp_pxx_table_empty helpers for checking whether
a given table entry is empty. This will be used explicitly
once we switch to explicit routines for hyp page table walk.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Introduce stage2 page table helpers for arm64. With the fake
page table level still in place, the stage2 table has the same
number of levels as that of the host (and hyp), so they all
fallback to the host version.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Add a helper to determine if a given pmd represents a huge page
either by hugetlb or thp, as we have for arm. This will be used
by KVM MMU code.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Rearrange the code for fake pgd handling, which is applicable
only for arm64. This will later be removed once we introduce
the stage2 page table walker macros.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
We share most of the bits for VTCR_EL2 for different page sizes,
except for the TG0 value and the entry level value. This patch
makes the definitions a bit more cleaner to reflect this fact.
Also cleans up the VTTBR_X calculation. No functional changes.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
TCR_EL1, TCR_EL2 and VTCR_EL2, all share some field positions
(TG0, ORGN0, IRGN0 and SH0) and their corresponding value definitions.
This patch makes the TCR_EL1 definitions reusable and uses them for TCR_EL2
and VTCR_EL2 fields.
This also fixes a bug where we assume TG0 in {V}TCR_EL2 is 1bit field.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
This adds the thermal controller and auxadc nodes to the Mediatek MT8173
dtsi file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Make sure we have AArch32 state available for running COMPAT
binaries and also for switching the personality to PER_LINUX32.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
[ Added cap bit, checks for HWCAP, personality ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add cpu_hwcap bit for keeping track of the support for 32bit EL0.
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On ARMv8 support for AArch32 state is optional. Hence it is
not safe to check the AArch32 ID registers for sanity, which
could lead to false warnings. This patch makes sure that the
AArch32 state is implemented before we keep track of the 32bit
ID registers.
As per ARM ARM (D.1.21.2 - Support for Exception Levels and
Execution States, DDI0487A.h), checking the support for AArch32
at EL0 is good enough to check the support for AArch32 (i.e,
AArch32 at EL1 => AArch32 at EL0, but not vice versa).
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Adds a helper to extract the support for AArch32 at EL0
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In order to handle systems which do not support 32bit at EL0,
split the COMPAT HWCAP entries into a separate table which can
be processed, only if the support is available.
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We use hwcaps for referring to ELF hwcaps capability information.
However this can be confusing with 'cpu_hwcaps' which stands for the
CPU capability bit field. This patch cleans up the names to make it
a bit more readable.
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We haven't used the push/pop macros for a while now, as it's typically
better to use immediate offsets for batches of accesses to the stack, as
we now do in the entry assembly for the kernel and hyp code.
Remove the unused macros.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
HAVE_ARCH_TRANSPARENT_HUGEPAGE has been defined in arch/Kconfig already,
the ARM64 version is identical with it and the default value is Y. So remove
the redundant definition and just select it under CONFIG_ARM64.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
[will: sort into alphabetical order whilst I'm resolving conflicts]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since of_get_cpu_node() increments refcount, the node should be put.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Show the bss segment information as with text and data in Virtual
memory kernel layout.
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Each line with single pr_cont() in Virtual kernel memory layout,
or the dump of the kernel memory layout in dmesg is not aligned
when PRINTK_TIME enabled, due to the missing time stamps.
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When CPUs are stopped during an abnormal operation like panic
for each CPU a line is printed and the stack trace is dumped.
This information is only interesting for the aborting CPU
and on systems with many CPUs it only makes it harder to
debug if after the aborting CPU the log is flooded with data
about all other CPUs too.
Therefore remove the stack dump and printk of other CPUs
and only print a single line that the other CPUs are going to be
stopped and, in case any CPUs remain online list them.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We already re-enable interrupts where necessary in the entry code, so
there is no need to do it again in do_page fault. This patch removes
the redundant code.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In head.S, the str_l macro, which takes a source register, a symbol name
and a temp register, is used to store a status value to the variable
__early_cpu_boot_status. Subsequently, the value of the temp register is
reused to invalidate any cachelines covering this variable.
However, since str_l resolves to
adrp \tmp, \sym
str \src, [\tmp, :lo12:\sym]
the temp register never actually holds the address of the variable but
only of the 4 KB window that covers it, and reusing it leads to the
wrong cacheline being invalidated. So instead, take the address
explicitly before doing the store, and reuse that value to perform
the cache invalidation.
Fixes: bb9052744f ("arm64: Handle early CPU boot failures")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When hardware updates of the access and dirty states are enabled, the
default ptep_set_access_flags() implementation based on calling
set_pte_at() directly is potentially racy. This triggers the "racy dirty
state clearing" warning in set_pte_at() because an existing writable PTE
is overridden with a clean entry.
There are two main scenarios for this situation:
1. The CPU getting an access fault does not support hardware updates of
the access/dirty flags. However, a different agent in the system
(e.g. SMMU) can do this, therefore overriding a writable entry with a
clean one could potentially lose the automatically updated dirty
status
2. A more complex situation is possible when all CPUs support hardware
AF/DBM:
a) Initial state: shareable + writable vma and pte_none(pte)
b) Read fault taken by two threads of the same process on different
CPUs
c) CPU0 takes the mmap_sem and proceeds to handling the fault. It
eventually reaches do_set_pte() which sets a writable + clean pte.
CPU0 releases the mmap_sem
d) CPU1 acquires the mmap_sem and proceeds to handle_pte_fault(). The
pte entry it reads is present, writable and clean and it continues
to pte_mkyoung()
e) CPU1 calls ptep_set_access_flags()
If between (d) and (e) the hardware (another CPU) updates the dirty
state (clears PTE_RDONLY), CPU1 will override the PTR_RDONLY bit
marking the entry clean again.
This patch implements an arm64-specific ptep_set_access_flags() function
to perform an atomic update of the PTE flags.
Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.3+
[will: reworded comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enable NUMA balancing for arm64 platforms.
Add pte, pmd protnone helpers for use by automatic NUMA balancing.
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Attempt to get the memory and CPU NUMA node via of_numa. If that
fails, default the dummy NUMA node and map all memory and CPUs to node
0.
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In order to extract NUMA information from the device tree, we need to
have the tree in its unflattened form.
Move the call to bootmem_init() in the tail of paging_init() into
setup_arch, and adjust header files so that its declaration is
visible.
Move the unflatten_device_tree() call between the calls to
paging_init() and bootmem_init(). Follow on patches add NUMA handling
to bootmem_init().
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With a VHE capable CPU, kernel can run at EL2 and is a decided at early
boot. If some of the CPUs didn't start it EL2 or doesn't have VHE, we
could have CPUs running at different exception levels, all in the same
kernel! This patch adds an early check for the secondary CPUs to detect
such situations.
For each non-boot CPU add a sanity check to make sure we don't have
different run levels w.r.t the boot CPU. We save the information on
whether the boot CPU is running in hyp mode or not and ensure the
remaining CPUs match it.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[will: made boot_cpu_hyp_mode static]
Signed-off-by: Will Deacon <will.deacon@arm.com>
During the activation of a secondary CPU, we could report serious
configuration issues and hence request to crash the kernel. We do
this for CPU ASID bit check now. We will need it also for handling
mismatched exception levels for the CPUs with VHE. Hence, add a
helper to do the same for reusability.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds the L2 cache topology on Hi6220. Hi6220 has two
clusters, every cluster has 512KiB L2 cache (32KiB x 16 ways).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
With profiling Hi6220's power modeling so get dynamic coefficient and
sustainable power. So pass these parameters from DT.
Now enable power allocator with only one actor for CPU part, so directly
use cluster0's thermal sensor for monitoring temperature.
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add all three dwmmc nodes description for hi6220
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add the mfd hi655x dts node and regulator support on hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add LED nodes for hi6220-hikey. There are total 6 LEDs on HiKey.
Four general purposed, one for WiFi activity, and one for Bluetooth
activity.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable SRAM node and stub clock node for Hi6220, which uses mailbox
channel 1 for CPU's frequency change.
Furthermore, add the CPU clock phandle in CPU's node and using
operating-points-v2 to register operating points. So can be used by
cpufreq-dt driver.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch add device mailbox node for Hi6220 in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In HiKey board dts file, enable i2c0 and i2c1 for working with 96boards' LS
mezzanine.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add Hi6220 spi configuration nodes. Disable by default in hi6220.dtsi
and enable it in board dts for usage of 96boards LS mezzanine board.
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add cpu and cluster level's low power state for Hi6220.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add sp804 timer for hi6220, so it can be used as broadcast timer.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
On Hi6220, below memory regions in DDR have specific purpose:
0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
0x06df,f000 - 0x06df,ffff: For mailbox message data;
0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
This patch reserves these memory regions in DT.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add nodes for the ChromeOS Embedded Controller and for the gas gauge
connected to the I2C bus that it controls.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Juno development platform has an external expansion bus which can
be used for additional hardware (e.g. LogicTile Express daughterboards).
Add this bus to the Juno base device-tree.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With CONFIG_PROVE_LOCKING, CONFIG_DEBUG_LOCKDEP and CONFIG_TRACE_IRQFLAGS
enabled, lockdep will compare current->hardirqs_enabled with the flags from
local_irq_save().
When a debug exception occurs, interrupts are disabled in entry.S, but
lockdep isn't told, resulting in:
DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
------------[ cut here ]------------
WARNING: at ../kernel/locking/lockdep.c:3523
Modules linked in:
CPU: 3 PID: 1752 Comm: perf Not tainted 4.5.0-rc4+ #2204
Hardware name: ARM Juno development board (r1) (DT)
task: ffffffc974868000 ti: ffffffc975f40000 task.ti: ffffffc975f40000
PC is at check_flags.part.35+0x17c/0x184
LR is at check_flags.part.35+0x17c/0x184
pc : [<ffffff80080fc93c>] lr : [<ffffff80080fc93c>] pstate: 600003c5
[...]
---[ end trace 74631f9305ef5020 ]---
Call trace:
[<ffffff80080fc93c>] check_flags.part.35+0x17c/0x184
[<ffffff80080ffe30>] lock_acquire+0xa8/0xc4
[<ffffff8008093038>] breakpoint_handler+0x118/0x288
[<ffffff8008082434>] do_debug_exception+0x3c/0xa8
[<ffffff80080854b4>] el1_dbg+0x18/0x6c
[<ffffff80081e82f4>] do_filp_open+0x64/0xdc
[<ffffff80081d6e60>] do_sys_open+0x140/0x204
[<ffffff80081d6f58>] SyS_openat+0x10/0x18
[<ffffff8008085d30>] el0_svc_naked+0x24/0x28
possible reason: unannotated irqs-off.
irq event stamp: 65857
hardirqs last enabled at (65857): [<ffffff80081fb1c0>] lookup_mnt+0xf4/0x1b4
hardirqs last disabled at (65856): [<ffffff80081fb188>] lookup_mnt+0xbc/0x1b4
softirqs last enabled at (65790): [<ffffff80080bdca4>] __do_softirq+0x1f8/0x290
softirqs last disabled at (65757): [<ffffff80080be038>] irq_exit+0x9c/0xd0
This patch adds the annotations to do_debug_exception(), while trying not
to call trace_hardirqs_off() if el1_dbg() interrupted a task that already
had irqs disabled.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit 1cf4f629d9 ("cpu/hotplug: Move online calls to
hotplugged cpu") it is ensured that callbacks of CPU_ONLINE and
CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP
function calls are no longer required.
Replace smp_call_function_single() with a direct call of
hw_breakpoint_reset(). To keep the calling convention, interrupts are
explicitly disabled around the call.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit 1cf4f629d9 ("cpu/hotplug: Move online calls to
hotplugged cpu") it is ensured that callbacks of CPU_ONLINE and
CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP
function calls are no longer required.
Replace smp_call_function_single() with a direct call to
clear_os_lock(). The function writes the OSLAR register to clear OS
locking. This does not require to be called with interrupts disabled,
therefore the smp_call_function_single() calling convention is not
preserved.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The mapping of the kernel consist of four segments, each of which is mapped
with different permission attributes and/or lifetimes. To optimize the TLB
and translation table footprint, we define various opaque constants in the
linker script that resolve to different aligment values depending on the
page size and whether CONFIG_DEBUG_ALIGN_RODATA is set.
Considering that
- a 4 KB granule kernel benefits from a 64 KB segment alignment (due to
the fact that it allows the use of the contiguous bit),
- the minimum alignment of the .data segment is THREAD_SIZE already, not
PAGE_SIZE (i.e., we already have padding between _data and the start of
the .data payload in many cases),
- 2 MB is a suitable alignment value on all granule sizes, either for
mapping directly (level 2 on 4 KB), or via the contiguous bit (level 3 on
16 KB and 64 KB),
- anything beyond 2 MB exceeds the minimum alignment mandated by the boot
protocol, and can only be mapped efficiently if the physical alignment
happens to be the same,
we can simplify this by standardizing on 64 KB (or 2 MB) explicitly, i.e.,
regardless of granule size, all segments are aligned either to 64 KB, or to
2 MB if CONFIG_DEBUG_ALIGN_RODATA=y. This also means we can drop the Kconfig
dependency of CONFIG_DEBUG_ALIGN_RODATA on CONFIG_ARM64_4K_PAGES.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Keeping .head.text out of the .text mapping buys us very little: its actual
payload is only 4 KB, most of which is padding, but the page alignment may
add up to 2 MB (in case of CONFIG_DEBUG_ALIGN_RODATA=y) of additional
padding to the uncompressed kernel Image.
Also, on 4 KB granule kernels, the 4 KB misalignment of .text forces us to
map the adjacent 56 KB of code without the PTE_CONT attribute, and since
this region contains things like the vector table and the GIC interrupt
handling entry point, this region is likely to benefit from the reduced TLB
pressure that results from PTE_CONT mappings.
So remove the alignment between the .head.text and .text sections, and use
the [_text, _etext) rather than the [_stext, _etext) interval for mapping
the .text segment.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Apart from the arm64/linux and EFI header data structures, there is nothing
in the .head.text section that must reside at the beginning of the Image.
So let's move it to the .init section where it belongs.
Note that this involves some minor tweaking of the EFI header, primarily
because the address of 'stext' no longer coincides with the start of the
.text section. It also requires a couple of relocated symbol references
to be slightly rewritten or their definition moved to the linker script.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Replace the poorly defined term chunk with segment, which is a term that is
already used by the ELF spec to describe contiguous mappings with the same
permission attributes of statically allocated ranges of an executable.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the vmemmap region has been redefined to cover the linear region
rather than the entire physical address space, we no longer need to
perform a virtual-to-physical translation in the implementaion of
virt_to_page(). This restricts virt_to_page() translations to the linear
region, so redefine virt_addr_valid() as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This moves the vmemmap region right below PAGE_OFFSET, aka the start
of the linear region, and redefines its size to be a power of two.
Due to the placement of PAGE_OFFSET in the middle of the address space,
whose size is a power of two as well, this guarantees that virt to
page conversions and vice versa can be implemented efficiently, by
masking and shifting rather than ordinary arithmetic.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Before restricting virt_to_page() to the linear mapping, ensure that
the text patching code does not use it to resolve references into the
core kernel text, which is mapped in the vmalloc area.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The zero page is statically allocated, so grab its struct page pointer
without using virt_to_page(), which will be restricted to the linear
mapping later.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The implementation of free_initmem_default() expects __init_begin
and __init_end to be covered by the linear mapping, which is no
longer the case. So open code it instead, using addresses that are
explicitly translated from kernel virtual to linear virtual.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The translation performed by virt_to_page() is only valid for linear
addresses, and kernel symbols are no longer in the linear mapping.
So perform the __pa() translation explicitly, which does the right
thing in either case, and only then translate to a struct page offset.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This removes the relocate_initrd() implementation and invocation, which are
no longer needed now that the placement of the initrd is guaranteed to be
covered by the linear mapping.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Instead of going out of our way to relocate the initrd if it turns out
to occupy memory that is not covered by the linear mapping, just add the
initrd to the linear mapping. This puts the burden on the bootloader to
pass initrd= and mem= options that are mutually consistent.
Note that, since the placement of the linear region in the PA space is
also dependent on the placement of the kernel Image, which may reside
anywhere in memory, we may still end up with a situation where the initrd
and the kernel Image are simply too far apart to be covered by the linear
region.
Since we now leave it up to the bootloader to pass the initrd in memory
that is guaranteed to be accessible by the kernel, add a mention of this to
the arm64 boot protocol specification as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This reverts commit 36e5cd6b89, since the
section alignment is now guaranteed by construction when choosing the
value of memstart_addr.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This redefines ARM64_MEMSTART_ALIGN in terms of the minimal alignment
required by sparsemem vmemmap. This comes down to using 1 GB for all
translation granules if CONFIG_SPARSEMEM_VMEMMAP is enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After choosing memstart_addr to be the highest multiple of
ARM64_MEMSTART_ALIGN less than or equal to the first usable physical memory
address, we clip the memblocks to the maximum size of the linear region.
Since the kernel may be high up in memory, we take care not to clip the
kernel itself, which means we have to clip some memory from the bottom if
this occurs, to ensure that the distance between the first and the last
usable physical memory address can be covered by the linear region.
However, we fail to update memstart_addr if this clipping from the bottom
occurs, which means that we may still end up with virtual addresses that
wrap into the userland range. So increment memstart_addr as appropriate to
prevent this from happening.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDIe4AAoJEPOmecmc0R2B3acH/3U9VHCGVy7w5RNl/UISe6Eu
og7QZyy8r8dNw+bk9EX8x9AyqkN4bHAfAqg+Pc+JvxOeqmTjxFqPqZKWjEUQ8BOw
SPsJE0ZeRRYAvp1OYfR1ATGwRQDvJq+DaKtb9d8S6ZdYdwXWR/JhkXiCxpQGEqAO
TV82csxc86T+F+GJN63uk0UVfnZhzFtCJ6zSWBVyEpiUYxeQwTSkxjVUUJagOJLT
Wb/0qgD2b8L1Xs8Flj0zVwAsvNIBKlxsaXzhN9EBD9pnHDQJ1l2cU2EdsQtWCwlE
9ic2kwYFlgTrCAo1FITWFgyUTFLnuGcrfn2QIBIWK1X6TBJuYauGzslJEE96luw=
=zT4u
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
This contains the rk3368-geekbox as new board, mailbox device
nodes for the core rk3368 and some cleanups for gpio-keys,
mmc and tsadc.
* tag 'v4.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
Documentation: devicetree: rockchip: Document rk3368-GeekBox
arm64: dts: rockchip: Add rk3368 GeekBox dts
arm64: dts: rockchip: Clean up gpio-keys nodes
dt-bindings: Add vendor prefix for GeekBuying.com
arm64: dts: rockchip: Add rk3368 mailbox device nodes
arm64: dts: rockchip: remove broken-cd from emmc and sdio
arm64: dts: rockchip: fix the incorrect otp-out pin on rk3368
Signed-off-by: Olof Johansson <olof@lixom.net>
Add initial dtsi file to support lg1312 SoC which based on
Cortex-A53. Also add dts file to support lg1312 reference board
which based on lg1312 SoC.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch introduces ARCH_LG1K to enable LG Electronics's LG1K SoC
family in Kconfig.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use USB3.0 fallback compatibility string in DT for r8a7795 SoC
* Add CAN support to DT for r8a7795 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXAb1iAAoJENfPZGlqN0++HZMP/1zD/pKDsMdDy6RpK8zBp6x+
jNT8aiq6B6Ss7dSsFp6c25wE7xJgfgeNNfIupslv3KL3AhcX613v0UbZLSRCxfBr
wKmbFq0LszecNpYydQmgPClqyV3t5ldu9gI+zDY1MoGqGMnmceWILiWcRIfnzWqr
wZaKdZ6vB1CILwOU/WMG4/TZLMag3OIMMRb6zTvtN/GO/OEVdbXU9Mdnkd9rCbtQ
qYOIUzMPPvoOzpwCudVMv7S+2Wa2hsDwDpyYoEZfBtqw8N7GkJ0te5yS3puvJiXF
TYB4KYgld2Dp1LdaS8wnZIXVXlM5fEFedcLQhdOq70DaMBZpotiwxzxpdkRIjYcX
TM3ZycQm91z2urP21gpUGgK5sON6zZOoNiWxwXs4q051ofyphrdfHnxCyxPUYsmd
PK/kUKNyTqyBSLcHkeedePJDaL7Ymk/Ij2ggjNXb1OBBcSpR1YUB0jcKuICR/AwJ
19IRXQu4ceHaMHTPqqpjwtHTVOPDQBzKXeqUSXLZELWpEdbvlpD6sJF2iKc9UsdG
juAH+LmWqWVZx1QQoAA+VqLY3XQ5glr/PwKy0sS5Is7JLOdC8v05sDdJ8oZ/jEnl
Ka+g3FUPKOpCGeN5qH59b0v0cgUbfuq18BP1bgOsWTGKBK2zSK5IAS00qquIx/wq
H8x3JTXDecJptEFgGurp
=m8DD
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM64 Based SoC DT Updates for v4.7
* Use USB3.0 fallback compatibility string in DT for r8a7795 SoC
* Add CAN support to DT for r8a7795 SoC
* tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7795: Use USB3.0 fallback compatibility string
arm64: dts: r8a7795: Add CAN support
arm64: dts: r8a7795: Add CAN external clock support
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use generic pinctrl properties in DT for salvator-x board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bcz4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Renesas ARM64 Based SoC Cleanup for v4.7
* Use generic pinctrl properties in DT for salvator-x board
* tag 'renesas-arm64-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: salvator-x: use generic pinctrl properties
Signed-off-by: Olof Johansson <olof@lixom.net>
We have two ARM PL022 SPI instances in NS2 SoC. On NS2 SVK,
one of the ARM PL022 SPI host has Silabs si3226x slic connected
to chip-select #0 whereas second ARM PL022 SPI host has Atmel
AT25 EEPROM connected to chip-select #0.
This patch adds ARM PL022, Silabs si3226x, and Atmel AT25
DT nodes in NS2 DT and NS2 SVK DT respectively.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
For more readabilty and consistency with other Broadcom SoCs, we move
all NS2 clock DT nodes from main SoC DT file to a separate DT file.
We also update the license header in ns2.dtsi as-per new Broadcom
convention.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The KVM ARM64 requires GIC maintenance interrupt for VGIC emulation
so this patch adds the missing "interrupts" attribute to GIC node in
NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We have one ARM PL330 DMA instance with 8 channels in
NS2 SoC. Let's enable it for NS2 in NS2 DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
and Amlogic P200/P201 boards.
We also fix the memory nodes on the Vega S95 DTS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hEv4
-----END PGP SIGNATURE-----
Merge tag 'gxbb-dt64' of https://github.com/carlocaione/linux-meson into next/dt64
Add support for a few more Amlogic S905/GXBB based boards: Hardkernel ODROID-C2
and Amlogic P200/P201 boards.
We also fix the memory nodes on the Vega S95 DTS.
* tag 'gxbb-dt64' of https://github.com/carlocaione/linux-meson:
ARM64: dts: amlogic: Add P200/P201 boards
ARM64: dts: amlogic: add Hardkernel ODROID-C2
Documentation: devicetree: amlogic: Document P20x and ODROID-C2 boards
ARM64: dts: amlogic: update serial aliases
ARM64: dts: amlogic: Clean up Vega S95 /memory nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
A batch of fixes for -rc4, for various platforms. Nothing really
substantial and worth pointing out in particular; small fixes for various
bugs, see shortlog for details.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5GPE
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A batch of fixes for -rc4, for various platforms.
Nothing really substantial and worth pointing out in particular; small
fixes for various bugs, see shortlog for details"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: sa1100: remove references to the defunct handhelds.org
bus: uniphier-system-bus: fix condition of overlap check
ARM: uniphier: drop weird sizeof()
ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
ARM: OMAP: Correct interrupt type for ARM TWD
ARM: DRA722: Add ID detect for Silicon Rev 2.0
ARM: dts: am43xx: fix edma memcpy channel allocation
ARM: dts: AM43x-epos: Fix clk parent for synctimer
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
documentation: Fix pinctrl documentation for Meson8 / Meson8b
ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
ARM: mvebu: Correct unit address for linksys
bus: mvebu-mbus: use %pa to print phys_addr_t
arm64: dts: vulcan: Update PCI ranges
ARM: u8500_defconfig: turn on the Synaptics RMI4 driver
ARM: pxa: fix the number of DMA requestor lines
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2+: Use srst_udelay for USB on dm814x
Currently, we check two pointers: cpu_ops and cpu_suspend on every idle
state entry. These pointers check can be avoided:
If cpu_ops has not been registered, arm_cpuidle_init() will return
-EOPNOTSUPP, so arm_cpuidle_suspend() will never have chance to
run. In other word, the cpu_ops check can be avoid.
Similarly, the cpu_suspend check could be avoided in this hot path by
moving it into arm_cpuidle_init().
I measured the 4096 * time from arm_cpuidle_suspend entry point to the
cpu_psci_cpu_suspend entry point. HW platform is Marvell BG4CT STB
board.
1. only one shell, no other process, hot-unplug secondary cpus, execute
the following cmd
while true
do
sleep 0.2
done
before the patch: 1581220ns
after the patch: 1579630ns
reduced by 0.1%
2. only one shell, no other process, hot-unplug secondary cpus, execute
the following cmd
while true
do
md5sum /tmp/testfile
sleep 0.2
done
NOTE: the testfile size should be larger than L1+L2 cache size
before the patch: 1961960ns
after the patch: 1912500ns
reduced by 2.5%
So the more complex the system load, the bigger the improvement.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There are some new cpu features which can be identified by id_aa64mmfr2,
this patch appends all fields of it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds device tree nodes for pdma0 and pdma1 controllers
found on exynos7 SoCs.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch enables PL330 DMA controller found on exynos7 SoCs.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.
The chip-specific compatible "fsl,ls2080a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.
The chip-specific compatible "fsl,ls1043a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds dts nodes for DSPI on LS1043A-RDB.
Signed-off-by: Yunhui Cui <B56489@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For Tegra boards, the device-tree alias serial0 is used for the console
and so add the stdout-path information so that the console no longer
needs to be passed via the kernel boot parameters.
For tegra132-norrin the alias serial0 is not defined and so add this.
This has been tested on tegra132-norrin and tegra210-p2371-0000.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the "#power-domain-cells" property which was incorrectly
included by commit e53095857166 ("arm64: tegra: Add Tegra210
support").
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add gpio-keys nodes for the volumn controls, lid switch, tablet mode and
power button.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
[treding@nvidia.com: use symbolic names for input types and codes]
[treding@nvidia.com: use wakeup-source instead of gpio-key,wakeup]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a gpio-keys device tree node to represent the Power, Volume Up and
Volume Down keys found on Jetson TX1.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the
wakeup source, "wakeup-source" is the new standard binding.
This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The comment about the 8250 vs. APB DMA-enabled UART devices that was
added for Tegra20 and Tegra30 in commit b6551bb933 ("ARM: tegra: dts:
add aliases and DMA requestor for serial controller") introduced a typo
that has since spread to various other DTS include files. Fix all
occurrences of this typo.
Suggested-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When Tegra124 support was first merged the unit-addresses of all devices
were listed with a "0," prefix to encode the reg property's second cell.
It turns out that this notation is not correct, and the "," separator is
only used to separate fields in the unit address (such as the device and
function number in PCI devices), not individual cells for addresses with
more than one cell.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Addresses:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXB3xgAAoJEEtpOizt6ddy3g4H/39G6Q3UUeDmfC/BFBHWwW9j
5SOGxiEU9LdZUo/SjSGxeB7Z9+avQqveYUg1P+TSuv2L1Aejawooe1Eo0sL194Fb
0yci/dJoTtkrS5b8l/05V6UsXruEHEfMYmEmAVPZWew1Zh7HvysZ1R43vRh4r8sO
rBPLomeKyzqyqGqjAVFZ+V+rQJPlN4CRLup8JirIu7f7jNb8wE//D41ej88v1/Tn
lF2oKx49uRUpUjBBoPqeus1UAu6Ply033VcKLq2oapyhGzWUG9Vd8OdRulHtroTB
yBJhpQnX/+ep3l9r2X0ZBu7rVKao2Sd9UsxozaW7W49zhgQKb13IdnTLYkSPHfE=
=FLXQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.6-rc4
Addresses:
- Wrong indentation in the PMU code from the merge window
- A long-time bug occuring with running ntpd on the host, candidate for stable
- Properly handle (and warn about) the unsupported configuration of running on
systems with less than 40 bits of PA space
- More fixes to the PM and hotplug notifier stuff from the merge window
We always thought that 40bits of PA range would be the minimum people
would actually build. Anything less is terrifyingly small.
Turns out that we were both right and wrong. Nobody has ever built
such a system, but the ARM Foundation Model has a PARange set to 36bits.
Just because we can. Oh well. Now, the KVM API explicitely says that
we offer a 40bit PA space to the VM, so we shouldn't run KVM on
the Foundation Model at all.
That being said, this patch offers a less agressive alternative, and
loudly warns about the configuration being unsupported. You'll still
be able to run VMs (at your own risks, though).
This is just a workaround until we have a proper userspace API where
we report the PARange to userspace.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
others are usual stable material.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXA8x6AAoJEL/70l94x66D0x8H/RcBnc75994RQ++WmHSvD9GF
yruGB8soLDdjX+Oceol0aEPHokrBu3JtcdoTBe0GwbCKV/F5NkQZ4EfLxDtR3tte
7ILkPULLy5GElFpJNQuT4pmXzTEspFvXpqHhFik7WVBga3W9wMFQcjbrgmGBUzLE
p2aJVhZyErpKxGFkUYWhDnlqWsguTTIzv/pqNhLY4VVc0UrXN9AA0fq9RkvgU3KS
Hxk4/A6SV/b7dyzvttzITww0f1iu8FmlLj2TXapIEoOz7AnInD6KIN0RYpxbDjxN
bEzEfpahUtuDeM87/t2kHEj0Gn09iHK7/BbCC1Hrwo1CQhbAQ/D0GIvqYAQixf4=
=NugZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The ARM and s390 fixes are for new regressions from the merge window,
others are usual stable material"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
compiler-gcc: disable -ftracer for __noclone functions
kvm: x86: make lapic hrtimer pinned
s390/mm/kvm: fix mis-merge in gmap handling
kvm: set page dirty only if page has been writable
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled
KVM: x86: Inject pending interrupt even if pending nmi exist
arm64: KVM: Register CPU notifiers when the kernel runs at HYP
arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting
The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC.
Some connectors are available directly on the module.
This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set a default event->overflow_handler in perf_event_alloc() so don't
need to check event->overflow_handler in __perf_event_overflow().
Following commits can give a different default overflow_handler.
Initial idea comes from Peter:
http://lkml.kernel.org/r/20130708121557.GA17211@twins.programming.kicks-ass.net
Since the default value of event->overflow_handler is not NULL, existing
'if (!overflow_handler)' checks need to be changed.
is_default_overflow_handler() is introduced for this.
No extra performance overhead is introduced into the hot path because in the
original code we still need to read this handler from memory. A conditional
branch is avoided so actually we remove some instructions.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459147292-239310-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we detect support for 16bit VMID in ID_AA64MMFR1, we set the
VTCR_EL2_VS field to 1 to make use of 16bit vmids. But, with
commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
this is broken and we corrupt VTCR_EL2:T0SZ instead of updating the VS
field. VTCR_EL2_VS was actually defined to the field shift (19) and
not the real value for VS. This patch fixes the issue.
Fixes: commit 3a3604bc5e ("arm64: KVM: Switch to C-based stage2 init")
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Add minimal DT files for the Amlogic P20x development boards, based on
the Amlogic S905/GXBB SoC.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add minimal DT files for the Hardkernel ODROID-C2 board based on the
Amlogic S905/GXBB SoC.
Used the other gxbb boards from Andreas Färber as a starting point.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Apparently, it's not valid to have an alias point to a disabled device.
Fix this by moving the aliases that are used (serial0) into the files
that use them, and remove aliases to disabled devices (serial1).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Resolve the following warnings from new dtc by adding the unit address:
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
DTC arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Fixes: cc733bc906 ("ARM64: dts: amlogic: Add Tronsmart Vega S95 configs")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enables basic arch and serial console support for Amlogic meson family
SoCs.
Tested with Amlogic P200 and Hardkernel ODROID-C2 boards.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
The LS1043a-QDS board is a high-performance computing, evaluation,
development, and test platform supporting the LS1043a SoC.
shawn.guo: sort the entries in Makefile alphabetcially
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PCI memory windows available in vulcan.dtsi are limited to 128MB
for 32-bit BARs, and 4GB for 64-bit BARs. Given the memory mapped IO
space available in arm64, these windows can be increased substantially
to support more use cases.
The change increases the 32-bit window to 256MB and the 64-bit window
to 128 GB. The firmware on vulcan boards will use these ranges as well.
PCI IO windows are not supported on Vulcan, so remove them instead of
keeping an unused value.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop superfluous #address-cells and #size-cells.
Use KEY_POWER define for 116.
Rename sub-nodes to avoid new dtc warnings.
Reported-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Julien Chauveau <chauveau.julien@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds mailbox device nodes in dts.
Mailbox is used by the Rockchip CPU cores to communicate
requests to MCU processor.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A few defconfig updates got dropped on the floor during the merge window,
so I've rounded up the remainder here:
* Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for
msm8916
* CPUFreq support for the Juno platform, using the MHU/SCPI interface
* Removal of the default command line, which assumed a console called
ttyAMA0
* Bits and pieces for the Hi6220 (96Boards HiKey)
Signed-off-by: Will Deacon <will.deacon@arm.com>
To use the ARMv8 PMU related register defines from the KVM code, we move
the relevant definitions to asm/perf_event.h header file and rename them
with prefix ARMV8_PMU_. This allows us to get rid of kvm_perf_event.h.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm and arm64 use different config options to specify big endian. This
needs taking into account when including code/headers between the two
architectures.
A case in point is PAN, which uses the __instr_arm() macro to output
instructions. The macro comes from opcodes.h, which lives under arch/arm.
On a big-endian build the mismatched config options mean the instruction
isn't byte swapped correctly, resulting in undefined instruction exceptions
during boot:
| alternatives: patching kernel code
| kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| Internal error: Oops - undefined instruction: 0 [#1] SMP
| Modules linked in:
| CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5
| Hardware name: Hisilicon PhosphorHi1382 EVB (DT)
| task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000
| PC is at dump_instr+0x68/0x100
| LR is at do_undefinstr+0x1d4/0x2a4
| pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5
| sp : ffffffc3365a6450
Cc: <stable@vger.kernel.org> #4.3.x-
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds TMU node, related temprature sensor and triping
point data for Atlas cpu core found on exynos7 SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Adds CAN controller nodes for r8a7795.
Note: CAN channel register base address mentioned in R-Car Gen3 Hardware
User Manual v0.5E is incorrect. The corrected base addresses are:
CAN Channel 0 - 0xe6c30000
CAN Channel 1 - 0xe6c38000
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Adds external CAN clock node for r8a7795. This clock can be used as
fCAN clock of CAN and CAN FD controller.
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
This patch updates the kzm9g device tree to use the generic properties.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Only one of "broken-cd" and "non-removable" should be supplied
according to Documentation/devicetree/bindings/mmc/mmc.txt.
Obviously emmc and sdio-wifi are non-removable devices, while
broken-cd is for removable device whose card detect pin is broken.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch fixes the incorrect Over-temperature protection pin.
since the rk3368 io list said the otp pin is gpio0a3.
Anyway, that should be fixed in here.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.
Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>. Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some final updates for ARM SoC specific dts files:
* The i.MX changes were sent relatively late, and had a dependency
on the clk tree, so I delayed that a bit. Support for the new
i.MX6qp SoC and a couple of new boards is added in this branch.
* Uniphier renames a few files to match the final product names
that were decided by the company, kudos to the kernel developer(s)
for getting support upstream before the product release.
Also two boards are added. The patches were posted early enough
and nice overall, but we forgot to apply them and decided to
give it some more time in linux-next
* at91 has two small bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=p5al
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM DT changes from Arnd Bergmann:
"Here are some final updates for ARM SoC specific dts files:
- The i.MX changes were sent relatively late, and had a dependency on
the clk tree, so I delayed that a bit. Support for the new i.MX6qp
SoC and a couple of new boards is added in this branch.
- Uniphier renames a few files to match the final product names that
were decided by the company, kudos to the kernel developer(s) for
getting support upstream before the product release. Also two
boards are added. The patches were posted early enough and nice
overall, but we forgot to apply them and decided to give it some
more time in linux-next
- at91 has two small bug fixes"
* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
ARM: dts: uniphier: add pinmux node for I2C ch4
ARM: dts: uniphier: add @{address} to EEPROM node
ARM: dts: uniphier: add PH1-Pro4 Sanji board support
ARM: dts: uniphier: add PH1-Pro4 Ace board support
ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
ARM: dts: uniphier: add reference clock nodes
ARM: dts: uniphier: rework UniPhier System Bus nodes
ARM: dts: uniphier: factor out ranges property of support card
arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
ARM: dts: imx53-qsb: Fix gpio button polarity
ARM: dts: vfxxx: Add DAC node for Vybrid SoC
ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
ARM: dts: imx: Add support for Advantech/GE B850v3
ARM: dts: imx: Add support for Advantech/GE B650v3
ARM: dts: imx: Add support for Advantech/GE B450v3
ARM: dts: imx: Add support for Advantech/GE Bx50v3
ARM: dts: imx: Add Advantech BA-16 Qseven module
...
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the usual ARM/SOC irqchip drivers
- A set of fixes for mbigen to handle multiple devices in a hardware
module proper
- A cleanup for the mbigen config option which was pointlessly user
configurable.
- A cleanup for tegra replacing open coded functionality by the
proper core function
The config cleanup touches arch/arm64/Kconfig.platforms to select the
irq chip for the related platform"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option
ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform
irqchip/mbigen: Handle multiple device nodes in a mbigen module
irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module
irqchip/tegra: Switch to use irq_domain_free_irqs_common
Currently we disable preemption in copy_to_user_page; a behaviour that
we inherited from the 32-bit arm code. This was necessary for older
cores without broadcast data cache maintenance, and ensured that cache
lines were dirtied and cleaned by the same CPU. On these systems dirty
cache line migration was not possible, so this was sufficient to
guarantee coherency.
On contemporary systems, cache coherence protocols permit (dirty) cache
lines to migrate between CPUs as a result of speculation, prefetching,
and other behaviours. To account for this, in ARMv8 data cache
maintenance operations are broadcast and affect all data caches in the
domain associated with the VA (i.e. ISH for kernel and user mappings).
In __switch_to we ensure that tasks can be safely migrated in the middle
of a maintenance sequence, using a dsb(ish) to ensure prior explicit
memory accesses are observed and cache maintenance operations are
completed before a task can be run on another CPU.
Given the above, it is not necessary to disable preemption in
copy_to_user_page. This patch removes the preempt_{disable,enable}
calls, permitting preemption.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 324420bf91 ("arm64: add support for ioremap() block
mappings") added new p?d_set_huge functions which do the hard work to
generate and set a correct block entry.
These differ from open-coded huge page creation in the early page table
code by explicitly setting the P?D_TYPE_SECT bits (which are implicitly
retained by mk_sect_prot() for any valid prot), but are otherwise
identical (and cannot fail on arm64).
For simplicity and consistency, make use of these in the initial page
table creation code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The KASLR code incorrectly expects the contents of x18 to be preserved
across a call into C code, and uses it to stash the contents of SCTLR_EL1
before enabling the MMU. If the MMU needs to be disabled again to create
the randomized kernel mapping, x18 is written back to SCTLR_EL1, which is
likely to crash the system if x18 has been clobbered by kasan_early_init()
or kaslr_early_init(). So use x22 instead, which is not in use so far in
head.S
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Miscellaneous bugfixes for ARM KVM
* Cleanup of memory barrier and removal of redundant barriers
* x86 fixes: page tracking oops, support for old buggy KVM nested on 4.5
* Support for protection keys in guests
* Lockdep fix
* Another conversion to simple wait queues and raw spinlocks,
backported from PREEMPT_RT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJW8aaXAAoJEL/70l94x66D7voH/i2ytj6PbuWQQobSKDY38x8F
MHDFJ5UgTFZPPt8cB8YiCl6Tu0C5I2mNOk0rfb+bcpM5C1U9IAnBbbupyUblp6K9
1u+u+al8IlnOsoLzJSUXKDK5H4mEVrUnwVxTpZol5Ph5qQ8FvpbkxboMu3AGevO5
PIUXucK7fP5WXVV3Nh4YnUnBkeYzuuXcqYcV/TjscNQ4NcMofElcgpBxmE498TTk
rvhyuf2chEtY2DsDh3nzeYgxcGLpvE4/l5a+puEoOx4M5CH24wwne9LHAWJz6ofm
H3XNhsCz3jIGmrNqqkGUUya5qSkCsq2ha7n+VDw+fiP1TKy3FtkrBYQrDj+ISuc=
=UtvF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"Second round of KVM changes for 4.6:
- build fixes for PPC KVM
- miscellaneous bugfixes for ARM KVM
- cleanup of memory barrier and removal of redundant barriers
- x86 fixes: page tracking oops, support for old buggy KVM nested on 4.5
- support for protection keys in guests
- lockdep fix
- another conversion to simple wait queues and raw spinlocks,
backported from PREEMPT_RT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
KVM: page_track: fix access to NULL slot
KVM: PPC: do not compile in vfio.o unconditionally
kvm, rt: change async pagefault code locking for PREEMPT_RT
KVM/PPC: update the comment of memory barrier in the kvmppc_prepare_to_enter()
KVM/x86: update the comment of memory barrier in the vcpu_enter_guest()
KVM: Replace smp_mb() with smp_load_acquire() in the kvm_flush_remote_tlbs()
KVM/x86: Call smp_wmb() before increasing tlbs_dirty
KVM: Replace smp_mb() with smp_mb_after_atomic() in the kvm_make_all_cpus_request()
KVM/x86: Replace smp_mb() with smp_store_mb/release() in the walk_shadow_page_lockless_begin/end()
KVM: Remove redundant smp_mb() in the kvm_mmu_commit_zap_page()
KVM, pkeys: expose CPUID/CR4 to guest
KVM, pkeys: add pkeys support for permission_fault
KVM, pkeys: introduce pkru_mask to cache conditions
KVM, pkeys: save/restore PKRU when guest/host switches
x86: pkey: introduce write_pkru() for KVM
KVM, pkeys: add pkeys support for xsave state
KVM, pkeys: disable pkeys for guests in non-paging mode
KVM: x86: remove magic number with enum cpuid_leafs
KVM: MMU: return page fault error code from permission_fault
KVM: fix spin_lock_init order on x86
...
This time with:
* Updates for the Exynos IOMMU driver to make use of default
domains and to add support for the SYSMMU v5
* New Mediatek IOMMU driver
* Support for the ARMv7 short descriptor format in the
io-pgtable code
* Default domain support for the ARM SMMU
* Couple of other small fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uiAk
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- updates for the Exynos IOMMU driver to make use of default domains
and to add support for the SYSMMU v5
- new Mediatek IOMMU driver
- support for the ARMv7 short descriptor format in the io-pgtable code
- default domain support for the ARM SMMU
- couple of other small fixes all over the place
* tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
iommu/ipmmu-vmsa: Add r8a7795 DT binding
iommu/mediatek: Check for NULL instead of IS_ERR()
iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags
iommu/mediatek: Fix handling of of_count_phandle_with_args result
iommu/dma: Fix NEED_SG_DMA_LENGTH dependency
iommu/mediatek: Mark PM functions as __maybe_unused
iommu/mediatek: Select ARM_DMA_USE_IOMMU
iommu/exynos: Use proper readl/writel register interface
iommu/exynos: Pointers are nto physical addresses
dts: mt8173: Add iommu/smi nodes for mt8173
iommu/mediatek: Add mt8173 IOMMU driver
memory: mediatek: Add SMI driver
dt-bindings: mediatek: Add smi dts binding
dt-bindings: iommu: Add binding for mediatek IOMMU
iommu/ipmmu-vmsa: Use ARCH_RENESAS
iommu/exynos: Support multiple attach_device calls
iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver
iommu/exynos: Add support for v5 SYSMMU
iommu/exynos: Update device tree documentation
iommu/exynos: Add support for SYSMMU controller with bogus version reg
...
- Initial support for ARMv8.1 CPU PMUs
- Support for the CPU PMU in Cavium ThunderX
- CPU PMU support for systems running 32-bit Linux in secure mode
- Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJW794rAAoJELescNyEwWM0O5IH/0ejoUjip3n4dFZnSzAbQQZe
VxCy3DXW5gS8YaswwX2dFw9K772/BpHlazq8AIJIhaR+b+Zzl5t0iOc12HluDilV
pMvi0JTCxwJhsEiKZnP0cVAU9HM6MAgtMOEegkd/YNESKQey30NeDtIcz/pQfTUV
28AF71+w5VPj/1EpHEEhHQsASRIx7eDbKzThzdlb8PnDS0o23QJhL9HjVTNIAlB8
BGxrUBKtBu0eH2Hx33vNjc7UYx1WZQlCk5cAaXevA8mbFXzYaMQI2Cel2nbNMO9i
eu5zPkDUCG7dq16PxK6IgM4AsDCtmmDuckLdN6UEQWYxkLbb2qHNRKtj0bKB8Sk=
=E4PE
-----END PGP SIGNATURE-----
Merge tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm[64] perf updates from Will Deacon:
"I have another mixed bag of ARM-related perf patches here.
It's about 25% CPU and 75% interconnect, but with drivers/bus/
languishing without an obvious maintainer or tree, Olof and I agreed
to keep all of these PMU patches together. I suspect a whole load of
code from drivers/bus/arm-* can be moved under drivers/perf/, so
that's on the radar for the future.
Summary:
- Initial support for ARMv8.1 CPU PMUs
- Support for the CPU PMU in Cavium ThunderX
- CPU PMU support for systems running 32-bit Linux in secure mode
- Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)"
* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits)
drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree
arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC
arm-cci: remove unused variable
arm-cci: don't return value from void function
arm-cci: make private functions static
arm-cci: CoreLink CCI-550 PMU driver
arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU
arm-cci: CCI-500: Work around PMU counter writes
arm-cci: Provide hook for writing to PMU counters
arm-cci: Add helper to enable PMU without synchornising counters
arm-cci: Add routines to save/restore all counters
arm-cci: Get the status of a counter
arm-cci: write_counter: Remove redundant check
arm-cci: Delay PMU counter writes to pmu::pmu_enable
arm-cci: Refactor CCI PMU enable/disable methods
arm-cci: Group writes to counter
arm-cci: fix handling cpumask_any_but return value
arm-cci: simplify sysfs attr handling
drivers/perf: arm_pmu: implement CPU_PM notifier
arm64: dts: Add Cavium ThunderX specific PMU
...
With the recent rewrite of the arm64 KVM hypervisor code in C, enabling
certain options like KASAN would allow the compiler to generate memory
accesses or function calls to addresses not mapped at EL2. This patch
disables the compiler instrumentation on the arm64 hypervisor code for
gcov-based profiling (GCOV_KERNEL), undefined behaviour sanity checker
(UBSAN) and kernel address sanitizer (KASAN).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: <stable@vger.kernel.org> # 4.5+
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The printk() implementation has a limit of LOG_LINE_MAX (== 1024 - 32)
buffer per call which the arm64 mem_init() breaches when printing the
virtual memory layout with CONFIG_KASAN enabled. The result is that the
last line is no longer printed. This patch splits the call into a
pr_notice() + additional pr_cont() calls.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
After commit 65da0a8e34 ("arm64: use non-global mappings for UEFI
runtime regions"), nobody use __local_flush_icache_all() anymore,
so drop it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit f80fb3a3d5 ("arm64: add support for kernel ASLR") missed a
DSB necessary to complete I-cache maintenance in the primary boot path,
and hence stale instructions may still be present in the I-cache and may
be executed until the I-cache maintenance naturally completes.
Since commit 8ec4198743 ("arm64: mm: ensure patched kernel text is
fetched from PoU"), all CPUs invalidate their I-caches after their MMU
is enabled. Prior a CPU's MMU having been enabled, arbitrary lines may
have been fetched from the PoC into I-caches. We never patch text
expected to be executed with the MMU off. Thus, it is unnecessary to
perform broadcast I-cache maintenance in the primary boot path.
This patch reduces the scope of the I-cache maintenance to the local
CPU, and adds the missing DSB with similar scope, matching prior
maintenance in the primary boot path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesehvuel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The implementation of macro inv_entry refers to its 'el' argument without
the required leading backslash, which results in an undefined symbol
'el' to be passed into the kernel_entry macro rather than the index of
the exception level as intended.
This undefined symbol strangely enough does not result in build failures,
although it is visible in vmlinux:
$ nm -n vmlinux |head
U el
0000000000000000 A _kernel_flags_le_hi32
0000000000000000 A _kernel_offset_le_hi32
0000000000000000 A _kernel_size_le_hi32
000000000000000a A _kernel_flags_le_lo32
.....
However, it does result in incorrect code being generated for invalid
exceptions taken from EL0, since the argument check in kernel_entry
assumes EL1 if its argument does not equal '0'.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When running with VHE, there is no need to translate kernel pointers
to the EL2 memory space, since we're already there (and we have a much
saner memory map to start with).
Unfortunately, kvm_ksym_ref is getting in the way, and the first
call into the "hypervisor" section is going to end up in fireworks,
since we're now branching into nowhereland. Meh.
A potential solution is to test if VHE is engaged or not, and only
perform the translation in the negative case. With this in place,
VHE is able to run again.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Pull EFI updates from Ingo Molnar:
"The main changes are:
- Use separate EFI page tables when executing EFI firmware code.
This isolates the EFI context from the rest of the kernel, which
has security and general robustness advantages. (Matt Fleming)
- Run regular UEFI firmware with interrupts enabled. This is already
the status quo under other OSs. (Ard Biesheuvel)
- Various x86 EFI enhancements, such as the use of non-executable
attributes for EFI memory mappings. (Sai Praneeth Prakhya)
- Various arm64 UEFI enhancements. (Ard Biesheuvel)
- ... various fixes and cleanups.
The separate EFI page tables feature got delayed twice already,
because it's an intrusive change and we didn't feel confident about
it - third time's the charm we hope!"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
x86/mm/pat: Fix boot crash when 1GB pages are not supported by the CPU
x86/efi: Only map kernel text for EFI mixed mode
x86/efi: Map EFI_MEMORY_{XP,RO} memory region bits to EFI page tables
x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()
efi/arm*: Perform hardware compatibility check
efi/arm64: Check for h/w support before booting a >4 KB granular kernel
efi/arm: Check for LPAE support before booting a LPAE kernel
efi/arm-init: Use read-only early mappings
efi/efistub: Prevent __init annotations from being used
arm64/vmlinux.lds.S: Handle .init.rodata.xxx and .init.bss sections
efi/arm64: Drop __init annotation from handle_kernel_image()
x86/mm/pat: Use _PAGE_GLOBAL bit for EFI page table mappings
efi/runtime-wrappers: Run UEFI Runtime Services with interrupts enabled
efi: Reformat GUID tables to follow the format in UEFI spec
efi: Add Persistent Memory type name
efi: Add NV memory attribute
x86/efi: Show actual ending addresses in efi_print_memmap
x86/efi/bgrt: Don't ignore the BGRT if the 'valid' bit is 0
efivars: Use to_efivar_entry
efi: Runtime-wrapper: Get rid of the rtc_lock spinlock
...
The arm64 device tree changes make up an increasing portion of
the overall changes, so they are kept separate from the 32-bit
devicetree changes and from the other arm64 updates.
Newly added SoCs and boards are:
- 96Boards Husky board
- AMD Overdrive board
- Amlogic S905 SoC and related Tronsmart boxes
- Annapurna Labs Alpine family and development board
- Broadcom Vulcan servers
- Broadcom Northstar 2 SoC
- Marvell Armada 3700 family and development board
- Qualcomm MSM8996 SoC
Additional devices are enabled for existing platforms from
Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and
there are a couple of other updates for Rockchip, Xilinx and
NXP/Freescale.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=izw3
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"The arm64 device tree changes make up an increasing portion of the
overall changes, so they are kept separate from the 32-bit devicetree
changes and from the other arm64 updates.
Newly added SoCs and boards are:
- 96Boards Husky board
- AMD Overdrive board
- Amlogic S905 SoC and related Tronsmart boxes
- Annapurna Labs Alpine family and development board
- Broadcom Vulcan servers
- Broadcom Northstar 2 SoC
- Marvell Armada 3700 family and development board
- Qualcomm MSM8996 SoC
Additional devices are enabled for existing platforms from Applied
Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a
couple of other updates for Rockchip, Xilinx and NXP/Freescale"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits)
ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Documentation: devicetree: amlogic: Document Meson GXBaby
devicetree: bindings: Add vendor prefix for Tronsmart
arm64: dts: qcom: Fix MPP's function used for LED control
arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi
arm64: dts: add the Alpine v2 EVP
arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
arm64: dts: marvell: update Armada AP806 clock description
arm64: dts: marvell: add Device Tree files for Armada 7K/8K
arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver
arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform.
arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver
arm64: dts: apm: mailbox device tree node for APM X-Gene platform.
arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
...
These are all the updates to device tree files for 32-bit platforms,
plus a couple of related 64-bit updates:
New SoC support:
- Allwinner A83T
- Axis Artpec-6 SoC
- Mediatek MT7623 SoC
- TI Keystone K2G SoC
- ST Microelectronics stm32f469
New board or machine support:
- ARM Juno R2
- Buffalo Linkstation LS-QVL and LS-GL
- Cubietruck plus
- D-Link DIR-885L
- DT support for ARM RealView PB1176 and PB11MPCore
- Google Nexus 7
- Homlet v2
- Itead Ibox
- Lamobo R1
- LG Optimus Black
- Logicpd dm3730
- Raspberry Pi Model A
Other changes include
- Lots of updates for Qualcomm APQ8064, MSM8974 and others
- Improved support for Nokia N900 and other OMAP machines
- Common clk support for lpc32xx
- HDLCD display on ARM
- Improved stm32f429 support
- Improved Renesas device support, r8a779x and others
- Lots of Rockchip updates
- Samsung cleanups
- ADC support for Atmel SAMA5D2
- BCM2835 (Raspberry Pi) improvements
- Broadcom Northstar Plus enhancements
- OMAP GPMC rework
- Several improvements for Atmel SAMA5D2 / Xplained
- Global change to remove inofficial "arm,amba-bus" compatible string
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RLUc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Arnd Bergmann:
"These are all the updates to device tree files for 32-bit platforms,
plus a couple of related 64-bit updates:
New SoC support:
- Allwinner A83T
- Axis Artpec-6 SoC
- Mediatek MT7623 SoC
- TI Keystone K2G SoC
- ST Microelectronics stm32f469
New board or machine support:
- ARM Juno R2
- Buffalo Linkstation LS-QVL and LS-GL
- Cubietruck plus
- D-Link DIR-885L
- DT support for ARM RealView PB1176 and PB11MPCore
- Google Nexus 7
- Homlet v2
- Itead Ibox
- Lamobo R1
- LG Optimus Black
- Logicpd dm3730
- Raspberry Pi Model A
Other changes include
- Lots of updates for Qualcomm APQ8064, MSM8974 and others
- Improved support for Nokia N900 and other OMAP machines
- Common clk support for lpc32xx
- HDLCD display on ARM
- Improved stm32f429 support
- Improved Renesas device support, r8a779x and others
- Lots of Rockchip updates
- Samsung cleanups
- ADC support for Atmel SAMA5D2
- BCM2835 (Raspberry Pi) improvements
- Broadcom Northstar Plus enhancements
- OMAP GPMC rework
- Several improvements for Atmel SAMA5D2 / Xplained
- Global change to remove inofficial "arm,amba-bus" compatible
string"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
ARM: dts: artpec: dual-license on artpec6.dtsi
ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
arm64: dts: juno/vexpress: fix node name unit-address presence warnings
arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
ARM: dts: at91: sama5d2 Xplained: add leds node
ARM: dts: at91: sama5d2 Xplained: add user push button
ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
ARM: dts: stm32f429: Enable Ethernet on Eval board
ARM: dts: omap3-sniper: TWL4030 keypad support
Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
ARM: dts: dm814x: dra62x: Fix NAND device nodes
ARM: dts: stm32f429: Add Ethernet support
ARM: dts: stm32f429: Add system config bank node
ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
ARM: dts: at91: sama5d2: add dma properties to UART nodes
ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
Pull ARM updates from Russell King:
"Another mixture of changes this time around:
- Split XIP linker file from main linker file to make it more
maintainable, and various XIP fixes, and clean up a resulting
macro.
- Decompressor cleanups from Masahiro Yamada
- Avoid printing an error for a missing L2 cache
- Remove some duplicated symbols in System.map, and move
vectors/stubs back into kernel VMA
- Various low priority fixes from Arnd
- Updates to allow bus match functions to return negative errno
values, touching some drivers and the driver core. Greg has acked
these changes.
- Virtualisation platform udpates form Jean-Philippe Brucker.
- Security enhancements from Kees Cook
- Rework some Kconfig dependencies and move PSCI idle management code
out of arch/arm into drivers/firmware/psci.c
- ARM DMA mapping updates, touching media, acked by Mauro.
- Fix places in ARM code which should be using virt_to_idmap() so
that Keystone2 can work.
- Fix Marvell Tauros2 to work again with non-DT boots.
- Provide a delay timer for ARM Orion platforms"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits)
ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0
ARM: 8547/1: dma-mapping: store buffer information
ARM: 8543/1: decompressor: rename suffix_y to compress-y
ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
ARM: 8532/1: uncompress: mark putc as inline
ARM: 8531/1: turn init_new_context into an inline function
ARM: 8530/1: remove VIRT_TO_BUS
ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL
ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds
ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
ARM: make the physical-relative calculation more obvious
ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
ARM: 8411/1: Add default SPARSEMEM settings
ARM: 8503/1: clk_register_clkdev: remove format string interface
ARM: 8529/1: remove 'i' and 'zi' targets
...
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
Merge second patch-bomb from Andrew Morton:
- a couple of hotfixes
- the rest of MM
- a new timer slack control in procfs
- a couple of procfs fixes
- a few misc things
- some printk tweaks
- lib/ updates, notably to radix-tree.
- add my and Nick Piggin's old userspace radix-tree test harness to
tools/testing/radix-tree/. Matthew said it was a godsend during the
radix-tree work he did.
- a few code-size improvements, switching to __always_inline where gcc
screwed up.
- partially implement character sets in sscanf
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
sscanf: implement basic character sets
lib/bug.c: use common WARN helper
param: convert some "on"/"off" users to strtobool
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
include/linux/unaligned: force inlining of byteswap operations
include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
usb: common: convert to use match_string() helper
ide: hpt366: convert to use match_string() helper
ata: hpt366: convert to use match_string() helper
power: ab8500: convert to use match_string() helper
power: charger_manager: convert to use match_string() helper
drm/edid: convert to use match_string() helper
pinctrl: convert to use match_string() helper
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
radix-tree tests: add test for radix_tree_iter_next
radix-tree tests: add regression3 test
...
During the review process of the UniPhier System Bus driver
(drivers/bus/uniphier.c), the current binding of the System Bus
Controller turned out to be no good. In order to make the driver
really usable, we have to switch over to the new binding defined by
Documentation/devicetree/bindings/bus/uniphier-system-bus.txt.
The old binding will be still supported for a while to keep the
backward compatibility.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This property is used in common by several boards. Move it to the
common place (uniphier-support-card.dtsi). If necessary, each board
can still override the property.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to the company's awful projecting, this chip has been renamed to
PH1-LD20. It has not been shipped yet, this change would have no
impact on our customers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Initial page table creation reworked to avoid breaking large block
mappings (huge pages) into smaller ones. The ARM architecture requires
break-before-make in such cases to avoid TLB conflicts but that's not
always possible on live page tables
- Kernel virtual memory layout: the kernel image is no longer linked to
the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of
the vmalloc space, allowing the kernel to be loaded (nearly) anywhere
in physical RAM
- Kernel ASLR: position independent kernel Image and modules being
randomly mapped in the vmalloc space with the randomness is provided
by UEFI (efi_get_random_bytes() patches merged via the arm64 tree,
acked by Matt Fleming)
- Implement relative exception tables for arm64, required by KASLR
(initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but
actual x86 conversion to deferred to 4.7 because of the merge
dependencies)
- Support for the User Access Override feature of ARMv8.2: this allows
uaccess functions (get_user etc.) to be implemented using LDTR/STTR
instructions. Such instructions, when run by the kernel, perform
unprivileged accesses adding an extra level of protection. The
set_fs() macro is used to "upgrade" such instruction to privileged
accesses via the UAO bit
- Half-precision floating point support (part of ARMv8.2)
- Optimisations for CPUs with or without a hardware prefetcher (using
run-time code patching)
- copy_page performance improvement to deal with 128 bytes at a time
- Sanity checks on the CPU capabilities (via CPUID) to prevent
incompatible secondary CPUs from being brought up (e.g. weird
big.LITTLE configurations)
- valid_user_regs() reworked for better sanity check of the sigcontext
information (restored pstate information)
- ACPI parking protocol implementation
- CONFIG_DEBUG_RODATA enabled by default
- VDSO code marked as read-only
- DEBUG_PAGEALLOC support
- ARCH_HAS_UBSAN_SANITIZE_ALL enabled
- Erratum workaround Cavium ThunderX SoC
- set_pte_at() fix for PROT_NONE mappings
- Code clean-ups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/oS+
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Here are the main arm64 updates for 4.6. There are some relatively
intrusive changes to support KASLR, the reworking of the kernel
virtual memory layout and initial page table creation.
Summary:
- Initial page table creation reworked to avoid breaking large block
mappings (huge pages) into smaller ones. The ARM architecture
requires break-before-make in such cases to avoid TLB conflicts but
that's not always possible on live page tables
- Kernel virtual memory layout: the kernel image is no longer linked
to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom
of the vmalloc space, allowing the kernel to be loaded (nearly)
anywhere in physical RAM
- Kernel ASLR: position independent kernel Image and modules being
randomly mapped in the vmalloc space with the randomness is
provided by UEFI (efi_get_random_bytes() patches merged via the
arm64 tree, acked by Matt Fleming)
- Implement relative exception tables for arm64, required by KASLR
(initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c
but actual x86 conversion to deferred to 4.7 because of the merge
dependencies)
- Support for the User Access Override feature of ARMv8.2: this
allows uaccess functions (get_user etc.) to be implemented using
LDTR/STTR instructions. Such instructions, when run by the kernel,
perform unprivileged accesses adding an extra level of protection.
The set_fs() macro is used to "upgrade" such instruction to
privileged accesses via the UAO bit
- Half-precision floating point support (part of ARMv8.2)
- Optimisations for CPUs with or without a hardware prefetcher (using
run-time code patching)
- copy_page performance improvement to deal with 128 bytes at a time
- Sanity checks on the CPU capabilities (via CPUID) to prevent
incompatible secondary CPUs from being brought up (e.g. weird
big.LITTLE configurations)
- valid_user_regs() reworked for better sanity check of the
sigcontext information (restored pstate information)
- ACPI parking protocol implementation
- CONFIG_DEBUG_RODATA enabled by default
- VDSO code marked as read-only
- DEBUG_PAGEALLOC support
- ARCH_HAS_UBSAN_SANITIZE_ALL enabled
- Erratum workaround Cavium ThunderX SoC
- set_pte_at() fix for PROT_NONE mappings
- Code clean-ups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits)
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Fix misspellings in comments.
arm64: efi: add missing frame pointer assignment
arm64: make mrs_s prefixing implicit in read_cpuid
arm64: enable CONFIG_DEBUG_RODATA by default
arm64: Rework valid_user_regs
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: KVM: Move kvm_call_hyp back to its original localtion
arm64: mm: treat memstart_addr as a signed quantity
arm64: mm: list kernel sections in order
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR
arm64: kconfig: add submenu for 8.2 architectural features
arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot
arm64: Add support for Half precision floating point
arm64: Remove fixmap include fragility
arm64: Add workaround for Cavium erratum 27456
arm64: mm: Mark .rodata as RO
...
The define has a comment from Nick Piggin from 2007:
/* For backwards compat. Remove me quickly. */
I guess 9 years should not be too hurried sense of 'quickly' even for
kernel measures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are few things about *pte_alloc*() helpers worth cleaning up:
- 'vma' argument is unused, let's drop it;
- most __pte_alloc() callers do speculative check for pmd_none(),
before taking ptl: let's introduce pte_alloc() macro which does
the check.
The only direct user of __pte_alloc left is userfaultfd, which has
different expectation about atomicity wrt pmd.
- pte_alloc_map() and pte_alloc_map_lock() are redefined using
pte_alloc().
[sudeep.holla@arm.com: fix build for arm64 hugetlbpage]
[sfr@canb.auug.org.au: fix arch/arm/mm/mmu.c some more]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
but lots of architecture-specific changes.
* ARM:
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- various optimizations to the vgic save/restore code.
* PPC:
- enabled KVM-VFIO integration ("VFIO device")
- optimizations to speed up IPIs between vcpus
- in-kernel handling of IOMMU hypercalls
- support for dynamic DMA windows (DDW).
* s390:
- provide the floating point registers via sync regs;
- separated instruction vs. data accesses
- dirty log improvements for huge guests
- bugfixes and documentation improvements.
* x86:
- Hyper-V VMBus hypercall userspace exit
- alternative implementation of lowest-priority interrupts using vector
hashing (for better VT-d posted interrupt support)
- fixed guest debugging with nested virtualizations
- improved interrupt tracking in the in-kernel IOAPIC
- generic infrastructure for tracking writes to guest memory---currently
its only use is to speedup the legacy shadow paging (pre-EPT) case, but
in the future it will be used for virtual GPUs as well
- much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJW5r3BAAoJEL/70l94x66D2pMH/jTSWWwdTUJMctrDjPVzKzG0
yOzHW5vSLFoFlwEOY2VpslnXzn5TUVmCAfrdmFNmQcSw6hGb3K/xA/ZX/KLwWhyb
oZpr123ycahga+3q/ht/dFUBCCyWeIVMdsLSFwpobEBzPL0pMgc9joLgdUC6UpWX
tmN0LoCAeS7spC4TTiTTpw3gZ/L+aB0B6CXhOMjldb9q/2CsgaGyoVvKA199nk9o
Ngu7ImDt7l/x1VJX4/6E/17VHuwqAdUrrnbqerB/2oJ5ixsZsHMGzxQ3sHCmvyJx
WG5L00ubB1oAJAs9fBg58Y/MdiWX99XqFhdEfxq4foZEiQuCyxygVvq3JwZTxII=
=OUZZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"One of the largest releases for KVM... Hardly any generic
changes, but lots of architecture-specific updates.
ARM:
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- various optimizations to the vgic save/restore code.
PPC:
- enabled KVM-VFIO integration ("VFIO device")
- optimizations to speed up IPIs between vcpus
- in-kernel handling of IOMMU hypercalls
- support for dynamic DMA windows (DDW).
s390:
- provide the floating point registers via sync regs;
- separated instruction vs. data accesses
- dirty log improvements for huge guests
- bugfixes and documentation improvements.
x86:
- Hyper-V VMBus hypercall userspace exit
- alternative implementation of lowest-priority interrupts using
vector hashing (for better VT-d posted interrupt support)
- fixed guest debugging with nested virtualizations
- improved interrupt tracking in the in-kernel IOAPIC
- generic infrastructure for tracking writes to guest
memory - currently its only use is to speedup the legacy shadow
paging (pre-EPT) case, but in the future it will be used for
virtual GPUs as well
- much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
KVM: x86: disable MPX if host did not enable MPX XSAVE features
arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
arm64: KVM: vgic-v3: Reset LRs at boot time
arm64: KVM: vgic-v3: Do not save an LR known to be empty
arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
arm64: KVM: vgic-v3: Avoid accessing ICH registers
KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
KVM: arm/arm64: vgic-v2: Reset LRs at boot time
KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
KVM: s390: allocate only one DMA page per VM
KVM: s390: enable STFLE interpretation only if enabled for the guest
KVM: s390: wake up when the VCPU cpu timer expires
KVM: s390: step the VCPU timer while in enabled wait
KVM: s390: protect VCPU cpu timer with a seqcount
KVM: s390: step VCPU cpu timer during kvm_run ioctl
...
Pull cpu hotplug updates from Thomas Gleixner:
"This is the first part of the ongoing cpu hotplug rework:
- Initial implementation of the state machine
- Runs all online and prepare down callbacks on the plugged cpu and
not on some random processor
- Replaces busy loop waiting with completions
- Adds tracepoints so the states can be followed"
More detailed commentary on this work from an earlier email:
"What's wrong with the current cpu hotplug infrastructure?
- Asymmetry
The hotplug notifier mechanism is asymmetric versus the bringup and
teardown. This is mostly caused by the notifier mechanism.
- Largely undocumented dependencies
While some notifiers use explicitely defined notifier priorities,
we have quite some notifiers which use numerical priorities to
express dependencies without any documentation why.
- Control processor driven
Most of the bringup/teardown of a cpu is driven by a control
processor. While it is understandable, that preperatory steps,
like idle thread creation, memory allocation for and initialization
of essential facilities needs to be done before a cpu can boot,
there is no reason why everything else must run on a control
processor. Before this patch series, bringup looks like this:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
bring the rest up
- All or nothing approach
There is no way to do partial bringups. That's something which is
really desired because we waste e.g. at boot substantial amount of
time just busy waiting that the cpu comes to life. That's stupid
as we could very well do preparatory steps and the initial IPI for
other cpus and then go back and do the necessary low level
synchronization with the freshly booted cpu.
- Minimal debuggability
Due to the notifier based design, it's impossible to switch between
two stages of the bringup/teardown back and forth in order to test
the correctness. So in many hotplug notifiers the cancel
mechanisms are either not existant or completely untested.
- Notifier [un]registering is tedious
To [un]register notifiers we need to protect against hotplug at
every callsite. There is no mechanism that bringup/teardown
callbacks are issued on the online cpus, so every caller needs to
do it itself. That also includes error rollback.
What's the new design?
The base of the new design is a symmetric state machine, where both
the control processor and the booting/dying cpu execute a well
defined set of states. Each state is symmetric in the end, except
for some well defined exceptions, and the bringup/teardown can be
stopped and reversed at almost all states.
So the bringup of a cpu will look like this in the future:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
bring itself up
The synchronization step does not require the control cpu to wait.
That mechanism can be done asynchronously via a worker or some
other mechanism.
The teardown can be made very similar, so that the dying cpu cleans
up and brings itself down. Cleanups which need to be done after
the cpu is gone, can be scheduled asynchronously as well.
There is a long way to this, as we need to refactor the notion when a
cpu is available. Today we set the cpu online right after it comes
out of the low level bringup, which is not really correct.
The proper mechanism is to set it to available, i.e. cpu local
threads, like softirqd, hotplug thread etc. can be scheduled on that
cpu, and once it finished all booting steps, it's set to online, so
general workloads can be scheduled on it. The reverse happens on
teardown. First thing to do is to forbid scheduling of general
workloads, then teardown all the per cpu resources and finally shut it
off completely.
This patch series implements the basic infrastructure for this at the
core level. This includes the following:
- Basic state machine implementation with well defined states, so
ordering and prioritization can be expressed.
- Interfaces to [un]register state callbacks
This invokes the bringup/teardown callback on all online cpus with
the proper protection in place and [un]installs the callbacks in
the state machine array.
For callbacks which have no particular ordering requirement we have
a dynamic state space, so that drivers don't have to register an
explicit hotplug state.
If a callback fails, the code automatically does a rollback to the
previous state.
- Sysfs interface to drive the state machine to a particular step.
This is only partially functional today. Full functionality and
therefor testability will be achieved once we converted all
existing hotplug notifiers over to the new scheme.
- Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying
processor:
Control CPU Booting CPU
do preparatory steps
kick cpu into life
do low level init
sync with booting cpu sync with control cpu
wait for boot
bring itself up
Signal completion to control cpu
In a previous step of this work we've done a full tree mechanical
conversion of all hotplug notifiers to the new scheme. The balance
is a net removal of about 4000 lines of code.
This is not included in this series, as we decided to take a
different approach. Instead of mechanically converting everything
over, we will do a proper overhaul of the usage sites one by one so
they nicely fit into the symmetric callback scheme.
I decided to do that after I looked at the ugliness of some of the
converted sites and figured out that their hotplug mechanism is
completely buggered anyway. So there is no point to do a
mechanical conversion first as we need to go through the usage
sites one by one again in order to achieve a full symmetric and
testable behaviour"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
cpu/hotplug: Document states better
cpu/hotplug: Fix smpboot thread ordering
cpu/hotplug: Remove redundant state check
cpu/hotplug: Plug death reporting race
rcu: Make CPU_DYING_IDLE an explicit call
cpu/hotplug: Make wait for dead cpu completion based
cpu/hotplug: Let upcoming cpu bring itself fully up
arch/hotplug: Call into idle with a proper state
cpu/hotplug: Move online calls to hotplugged cpu
cpu/hotplug: Create hotplug threads
cpu/hotplug: Split out the state walk into functions
cpu/hotplug: Unpark smpboot threads from the state machine
cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
cpu/hotplug: Implement setup/removal interface
cpu/hotplug: Make target state writeable
cpu/hotplug: Add sysfs state interface
cpu/hotplug: Hand in target state to _cpu_up/down
cpu/hotplug: Convert the hotplugged cpu work to a state machine
cpu/hotplug: Convert to a state machine for the control processor
cpu/hotplug: Add tracepoints
...
* pci/aer:
PCI/AER: Log aer_inject error injections
PCI/AER: Log actual error causes in aer_inject
PCI/AER: Use dev_warn() in aer_inject
PCI/AER: Fix aer_inject error codes
* pci/enumeration:
PCI: Fix broken URL for Dell biosdevname
* pci/kconfig:
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
PCI: Include pci/pcie/Kconfig directly from pci/Kconfig
* pci/misc:
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: Add QEMU top-level IDs for (sub)vendor & device
unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition
PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h
PCI: Move pci_dma_* helpers to common code
frv/PCI: Remove stray pci_{alloc,free}_consistent() declaration
* pci/virtualization:
PCI: Wait for up to 1000ms after FLR reset
PCI: Support SR-IOV on any function type
* pci/vpd:
PCI: Prevent VPD access for buggy devices
PCI: Sleep rather than busy-wait for VPD access completion
PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
PCI: Rename VPD symbols to remove unnecessary "pci22"
PCI: Remove struct pci_vpd_ops.release function pointer
PCI: Move pci_vpd_release() from header file to pci/access.c
PCI: Move pci_read_vpd() and pci_write_vpd() close to other VPD code
PCI: Determine actual VPD size on first access
PCI: Use bitfield instead of bool for struct pci_vpd_pci22.busy
PCI: Allow access to VPD attributes with size 0
PCI: Update VPD definitions
Pull read-only kernel memory updates from Ingo Molnar:
"This tree adds two (security related) enhancements to the kernel's
handling of read-only kernel memory:
- extend read-only kernel memory to a new class of formerly writable
kernel data: 'post-init read-only memory' via the __ro_after_init
attribute, and mark the ARM and x86 vDSO as such read-only memory.
This kind of attribute can be used for data that requires a once
per bootup initialization sequence, but is otherwise never modified
after that point.
This feature was based on the work by PaX Team and Brad Spengler.
(by Kees Cook, the ARM vDSO bits by David Brown.)
- make CONFIG_DEBUG_RODATA always enabled on x86 and remove the
Kconfig option. This simplifies the kernel and also signals that
read-only memory is the default model and a first-class citizen.
(Kees Cook)"
* 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Pull ram resource handling changes from Ingo Molnar:
"Core kernel resource handling changes to support NVDIMM error
injection.
This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM,
for System RAM while keeping the current IORESOURCE_MEM type bit set
for all memory-mapped ranges (including System RAM) for backward
compatibility.
With this resource flag it no longer takes a strcmp() loop through the
resource tree to find "System RAM" resources.
The new resource type is then used to extend ACPI/APEI error injection
facility to also support NVDIMM"
* 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI/EINJ: Allow memory error injection to NVDIMM
resource: Kill walk_iomem_res()
x86/kexec: Remove walk_iomem_res() call with GART type
x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
resource: Add walk_iomem_res_desc()
memremap: Change region_intersects() to take @flags and @desc
arm/samsung: Change s3c_pm_run_res() to use System RAM type
resource: Change walk_system_ram() to use System RAM type
drivers: Initialize resource entry to zero
xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM
kexec: Set IORESOURCE_SYSTEM_RAM for System RAM
arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM
ia64: Set System RAM type and descriptor
x86/e820: Set System RAM type and descriptor
resource: Add I/O resource descriptor
resource: Handle resource flags properly
resource: Add System RAM resource type
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Zm1/
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6/gxbb-arm64' of https://github.com/carlocaione/linux-meson into next/arm64
Provide the ARCH_MESON Kconfig symbol for the Amlogic S905 SoCs.
* tag 'for-v4.6/gxbb-arm64' of https://github.com/carlocaione/linux-meson:
ARM64: Enable Amlogic Meson GXBaby platform
Signed-off-by: Olof Johansson <olof@lixom.net>
Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KmAy
-----END PGP SIGNATURE-----
Merge tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson into next/dt64
This series adds initial support for the Amlogic S905 based
Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
- Add new DTS to enable support for the boards
- Add documentation for compatibles and vendor prefix
* tag 'for-v4.6/gxbb-dt' of https://github.com/carlocaione/linux-meson:
ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Documentation: devicetree: amlogic: Document Meson GXBaby
devicetree: bindings: Add vendor prefix for Tronsmart
Signed-off-by: Olof Johansson <olof@lixom.net>
The compatible string "simple-bus" is well defined in ePAPR, while
I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or
Documentation/devicetree/.
DT is also used by other projects than Linux kernel. It is not a
good idea to rely on such an unofficial binding.
This commit
- replaces "arm,amba-bus" with "simple-bus"
- drops "arm,amba-bus" where it is used along with "simple-bus"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add support for SBSA Generic Watchdog on foundation models
2. Fix node name unit-address presence/absence mismatch warnings in
all the device trees
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uO7I
-----END PGP SIGNATURE-----
Merge tag 'vexpress-for-v4.6/dt-updates-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Additional updates for ARM VExpress/Juno platforms
1. Add support for SBSA Generic Watchdog on foundation models
2. Fix node name unit-address presence/absence mismatch warnings in
all the device trees
* tag 'vexpress-for-v4.6/dt-updates-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno/vexpress: fix node name unit-address presence warnings
arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XcED
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung Exynos ARM64 improvements for v4.6:
1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into
one ARCH_EXYNOS.
This depends on clk tree: removal of last presence of ARCH_EXYNOS7.
* tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
clk: samsung: Enable COMPILE_TEST for Samsung clocks
clk: Move vendor's Kconfig into CCF menu section
clk: mediatek: Fix memory leak on clock init fail
clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h
clk: xgene: Remove return from void function
clk: xgene: Add SoC and PMD PLL clocks with v2 hardware
Documentation: Update APM X-Gene clock binding for v2 hardware
clk: s2mps11: remove redundant code
clk: s2mps11: remove redundant static variables declaration
clk: s2mps11: allocate only one structure for clock init
clk: s2mps11: merge two for loops in one
clk-divider: make sure read-only dividers do not write to their register
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
clk: mvebu: Mark ioremapped memory as __iomem
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQX0wACgkQCwYYjhRyO9V9nwCgqk3LOUVjtyjGxd4YU8iHzEBe
B+oAoKMMiTTb/yqcwMdN+l1B5RMOxW4o
=fs9N
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.6 (part 2)
Add support for the Armada 7K and 8K SoCs and the Armada 8040 DB board
* tag 'mvebu-dt64-4.6-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
arm64: dts: marvell: update Armada AP806 clock description
arm64: dts: marvell: add Device Tree files for Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
Increase the block minors from the default 8 to 16. The db410c board
by default has eMMC rootfs on the 10th partition.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable sdhci and restart functionality for devices based on msm8916 platform.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the 16KB or 64KB page configurations, the generic
vmemmap_populate() implementation warns on potential offnode
page_structs via vmemmap_verify() because the arm64 kasan_init() passes
NUMA_NO_NODE instead of the actual node for the kernel image memory.
Fixes: f9040773b7 ("arm64: move kernel image to base of vmalloc area")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: James Morse <james.morse@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The set_pte_at() function must update the hardware PTE_RDONLY bit
depending on the state of the PTE_WRITE and PTE_DIRTY bits of the given
entry value. However, it currently only performs this for pte_valid()
entries, ignoring PTE_PROT_NONE. The side-effect is that PROT_NONE
mappings would not have the PTE_RDONLY bit set. Without
CONFIG_ARM64_HW_AFDBM, this is not an issue since such PROT_NONE pages
are not accessible anyway.
With commit 2f4b829c62 ("arm64: Add support for hardware updates of
the access and dirty pte bits"), the ptep_set_wrprotect() function was
re-written to cope with automatic hardware updates of the dirty state.
As an optimisation, only PTE_RDONLY is checked to assess the "dirty"
status. Since set_pte_at() does not set this bit for PROT_NONE mappings,
such pages may be considered "dirty" as a result of
ptep_set_wrprotect().
This patch updates the pte_valid() check to pte_present() in
set_pte_at(). It also adds PTE_PROT_NONE to the swap entry bits comment.
Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Tested-by: Ganapatrao Kulkarni <gkulkarni@cavium.com>
Cc: <stable@vger.kernel.org>
- Temporarily disable huge pages built using contiguous ptes
- Ensure vmemmap region is sufficiently aligned for sparsemem sections
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJW4FSYAAoJELescNyEwWM0cp4H/0+9iMTqb3KowIW1vQPNnOG2
BG/RVsGlCPAwBu0V4FdcY7eK4fQ9J+/UCmVd5/SrlpjNpblinxRPihbIzs4bToqa
It02wNk7ISPm0oYtyGrRu1TpC5AvMykcluZkU/CUk0sjZlBAi8WSaJiqftFuZSGH
lhyhARO4KscbAUUhwDDYNKuWmLbmyOpt9RM2fziNQdjSp+8czCoCR9G+JXiPQFsJ
ORU10BqBDCyFpp8/NhM55qA76FJo6RCBUWx/6L1oJJxjvahkmPba/hhnfI7+Xj1u
3FKAntJ6wVZeKqRsIkOlECoU/mrgjlTByTFN+o3KhOky8ZYBHoveIQWtsqNMFd4=
=7d1o
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I thought we were done for 4.5, but then the 64k-page chaps came
crawling out of the woodwork. *sigh*
The vmemmap fix I sent for -rc7 caused a regression with 64k pages and
sparsemem and at some point during the release cycle the new hugetlb
code using contiguous ptes started failing the libhugetlbfs tests with
64k pages enabled.
So here are a couple of patches that fix the vmemmap alignment and
disable the new hugetlb page sizes whilst a proper fix is being
developed:
- Temporarily disable huge pages built using contiguous ptes
- Ensure vmemmap region is sufficiently aligned for sparsemem
sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: partial revert of 66b3923a1a
arm64: account for sparsemem section alignment when choosing vmemmap offset
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 66b3923a1a ("arm64: hugetlb: add support for PTE contiguous bit")
introduced support for huge pages using the contiguous bit in the PTE
as opposed to block mappings, which may be slightly unwieldy (512M) in
64k page configurations.
Unfortunately, this support has resulted in some late regressions when
running the libhugetlbfs test suite with 64k pages and CONFIG_DEBUG_VM
as a result of a BUG:
| readback (2M: 64): ------------[ cut here ]------------
| kernel BUG at fs/hugetlbfs/inode.c:446!
| Internal error: Oops - BUG: 0 [#1] SMP
| Modules linked in:
| CPU: 7 PID: 1448 Comm: readback Not tainted 4.5.0-rc7 #148
| Hardware name: linux,dummy-virt (DT)
| task: fffffe0040964b00 ti: fffffe00c2668000 task.ti: fffffe00c2668000
| PC is at remove_inode_hugepages+0x44c/0x480
| LR is at remove_inode_hugepages+0x264/0x480
Rather than revert the entire patch, simply avoid advertising the
contiguous huge page sizes for now while people are actively working on
a fix. This patch can then be reverted once things have been sorted out.
Cc: David Woods <dwoods@ezchip.com>
Reported-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit dfd55ad85e ("arm64: vmemmap: use virtual projection of linear
region") fixed an issue where the struct page array would overflow into the
adjacent virtual memory region if system RAM was placed so high up in
physical memory that its addresses were not representable in the build time
configured virtual address size.
However, the fix failed to take into account that the vmemmap region needs
to be relatively aligned with respect to the sparsemem section size, so that
a sequence of page structs corresponding with a sparsemem section in the
linear region appears naturally aligned in the vmemmap region.
So round up vmemmap to sparsemem section size. Since this essentially moves
the projection of the linear region up in memory, also revert the reduction
of the size of the vmemmap region.
Cc: <stable@vger.kernel.org>
Fixes: dfd55ad85e ("arm64: vmemmap: use virtual projection of linear region")
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: David Daney <david.daney@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
So far, we're always writing all possible LRs, setting the empty
ones with a zero value. This is obvious doing a low of work for
nothing, and we're better off clearing those we've actually
dirtied on the exit path (it is very rare to inject more than one
interrupt at a time anyway).
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In order to let the GICv3 code be more lazy in the way it
accesses the LRs, it is necessary to start with a clean slate.
Let's reset the LRs on each CPU when the vgic is probed (which
includes a round trip to EL2...).
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On exit, any empty LR will be signaled in ICH_ELRSR_EL2. Which
means that we do not have to save it, and we can just clear
its state in the in-memory copy.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Next on our list of useless accesses is the maintenance interrupt
status registers (ICH_MISR_EL2, ICH_EISR_EL2).
It is pointless to save them if we haven't asked for a maintenance
interrupt the first place, which can only happen for two reasons:
- Underflow: ICH_HCR_UIE will be set,
- EOI: ICH_LR_EOI will be set.
These conditions can be checked on the in-memory copies of the regs.
Should any of these two condition be valid, we must read GICH_MISR.
We can then check for ICH_MISR_EOI, and only when set read
ICH_EISR_EL2.
This means that in most case, we don't have to save them at all.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Just like on GICv2, we're a bit hammer-happy with GICv3, and access
them more often than we should.
Adopt a policy similar to what we do for GICv2, only save/restoring
the minimal set of registers. As we don't access the registers
linearly anymore (we may skip some), the convoluted accessors become
slightly simpler, and we can drop the ugly indexing macro that
tended to confuse the reviewers.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/hotplug/Kconfig.
Note that this effectively adds pci/hotplug/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/hotplug/Kconfig:
alpha
arm
avr32
frv
m68k
microblaze
mn10300
sparc
unicore32
Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/pcie/Kconfig.
Note that this effectively adds pci/pcie/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/pcie/Kconfig:
alpha
avr32
blackfin
frv
m32r
m68k
microblaze
mn10300
parisc
sparc
unicore32
xtensa
[bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace]
Signed-off-by: Sasa Bogicevic <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fa38a82096a1 ("scripts/dtc: Update to upstream version
53bf130b1cdd") added warnings on node name unit-address presence/absence
mismatch in device trees.
This patch fixes those warning on all the juno/vexpress platforms where
unit-address is present in node name while the reg/ranges property is
not present. It also adds unit-address to all smb bus node.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This can be a example of adding SBSA Generic Watchdog device node
into some dts files for the Soc which contains SBSA Generic Watchdog.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
[edited subject and moved change to dtsi file]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
For a long time all architectures implement the pci_dma_* functions using
the generic DMA API, and they all use the same header to do so.
Move this header, pci-dma-compat.h, to include/linux and include it from
the generic pci.h instead of having each arch duplicate this include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add Device Trees for Tronsmart Vega S95 Pro, Meta and Telos TV boxes.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Provide the ARCH_MESON Kconfig symbol to allow enabling existing serial
and i2c drivers.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
- Ensure struct page array fits within vmemmap area
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1NaCAAoJELescNyEwWM0Sl8H/3jJiGQixMLmjdfUsZVrtdk5
0Smn4HKYxv3AV2WQ6+miOquOhMz3xrGIHaOf1Zf4GSo3n02drq3pmHqrM2muBpp5
tmw9Q36dApXKIztpBQDqk7yCEpY7rELtIjvaOjta3OOLFbBnTsdGdkp+EWEn6m1g
NJ6Cnw96KMHnivbwLpVzbeRQni9E+oJIhpv4p/wy5gSTqMCdJIBsfK3/uv3rszLZ
O70F6+ZL9a2wUc4SnSUESpEuFmwoZHWROlZreZlHXQzmuyqpYIJK/JxBMaaz2yC/
2L2k3kEmgfRwxjh5Jcp5yzKxCJH0ZUYYGoDKoDaIb8iP3SrlTlfp8jBorANIxcY=
=dfNx
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Arm64 fix for -rc7. Without it, our struct page array can overflow
the vmemmap region on systems with a large PHYS_OFFSET.
Nothing else on the radar at the moment, so hopefully that's it for
4.5 from us.
Summary: Ensure struct page array fits within vmemmap area"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vmemmap: use virtual projection of linear region
The prologue of the EFI entry point pushes x29 and x30 onto the stack but
fails to create the stack frame correctly by omitting the assignment of x29
to the new value of the stack pointer. So fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 0f54b14e76 ("arm64: cpufeature: Change read_cpuid() to use
sysreg's mrs_s macro") changed read_cpuid to require a SYS_ prefix on
register names, to allow manual assembly of registers unknown by the
toolchain, using tables in sysreg.h.
This interacts poorly with commit 42b5573403 ("efi/arm64: Check
for h/w support before booting a >4 KB granular kernel"), which is
curretly queued via the tip tree, and uses read_cpuid without a SYS_
prefix. Due to this, a build of next-20160304 fails if EFI and 64K pages
are selected.
To avoid this issue when trees are merged, move the required SYS_
prefixing into read_cpuid, and revert all of the updated callsites to
pass plain register names. This effectively reverts the bulk of commit
0f54b14e76.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In spite of its name, CONFIG_DEBUG_RODATA is an important hardening feature
for production kernels, and distros all enable it by default in their
kernel configs. However, since enabling it used to result in more granular,
and thus less efficient kernel mappings, it is not enabled by default for
performance reasons.
However, since commit 2f39b5f91e ("arm64: mm: Mark .rodata as RO"), the
various kernel segments (.text, .rodata, .init and .data) are already
mapped individually, and the only effect of setting CONFIG_DEBUG_RODATA is
that the existing .text and .rodata mappings are updated late in the boot
sequence to have their read-only attributes set, which means that any
performance concerns related to enabling CONFIG_DEBUG_RODATA are no longer
valid.
So from now on, make CONFIG_DEBUG_RODATA default to 'y'
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T9z9
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung MFD and related configs
arm64: defconfig: Enable exynos thermal config
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Geoff Levand